From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
Mark Brown <broonie@kernel.org>, Wolfram Sang <wsa@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Andy Gross <agross@kernel.org>,
Matthias Kaehlcke <mka@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Sumit Semwal <sumit.semwal@linaro.org>,
Amit Pundir <amit.pundir@linaro.org>,
linux-spi@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 7/7] arm64: dts: qcom: sdm845: enable dma for spi
Date: Mon, 11 Jan 2021 20:46:51 +0530 [thread overview]
Message-ID: <20210111151651.1616813-8-vkoul@kernel.org> (raw)
In-Reply-To: <20210111151651.1616813-1-vkoul@kernel.org>
Add dmas property for spi@880000 and pinconf setting so that we can use
dma for this spi device. Also, add iommu properties for qup and spi.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 11 +++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 7cc236575ee2..0653468f26ce 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -418,6 +418,10 @@ &gcc {
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
};
+&gpi_dma0 {
+ status = "okay";
+};
+
&gpu {
zap-shader {
memory-region = <&gpu_mem>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index c9a127bbd606..bd9952f54721 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/clock/qcom,lpass-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1183,6 +1184,9 @@ spi0: spi@880000 {
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -2622,6 +2626,13 @@ pinmux {
"gpio2", "gpio3";
function = "qup0";
};
+
+ config {
+ pins = "gpio0", "gpio1",
+ "gpio2", "gpio3";
+ drive-strength = <6>;
+ bias-disable;
+ };
};
qup_spi1_default: qup-spi1-default {
--
2.26.2
next prev parent reply other threads:[~2021-01-11 15:18 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-11 15:16 [PATCH 0/7] Add and enable GPI DMA users Vinod Koul
2021-01-11 15:16 ` [PATCH 1/7] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header Vinod Koul
2021-01-11 15:31 ` Bjorn Andersson
2021-01-11 15:16 ` [PATCH 2/7] soc: qcom: geni: move struct geni_wrapper to header Vinod Koul
2021-01-11 15:34 ` Bjorn Andersson
2021-01-11 17:43 ` Vinod Koul
2021-01-11 18:51 ` Bjorn Andersson
2021-01-11 15:16 ` [PATCH 3/7] soc: qcom: geni: Add support for gpi dma Vinod Koul
2021-01-11 15:40 ` Bjorn Andersson
2021-01-11 17:22 ` Vinod Koul
2021-01-13 0:01 ` Doug Anderson
2021-01-13 3:22 ` Vinod Koul
2021-01-11 15:16 ` [PATCH 4/7] spi: spi-geni-qcom: Add support for GPI dma Vinod Koul
2021-01-11 16:35 ` Mark Brown
2021-06-16 8:50 ` Vinod Koul
2021-06-16 11:35 ` Mark Brown
2021-06-16 12:02 ` Vinod Koul
2021-06-17 6:20 ` Vinod Koul
2021-01-11 17:19 ` Bjorn Andersson
2021-01-12 7:31 ` Lukas Wunner
2021-01-12 11:02 ` kernel test robot
2021-01-12 11:02 ` kernel test robot
2021-01-13 0:01 ` Doug Anderson
2021-01-13 3:24 ` Vinod Koul
2021-02-04 21:34 ` Dmitry Baryshkov
2021-01-11 15:16 ` [PATCH 5/7] i2c: qcom-geni: Add support for GPI DMA Vinod Koul
2021-01-11 18:14 ` Bjorn Andersson
2021-01-12 5:50 ` Vinod Koul
2021-01-11 15:16 ` [PATCH 6/7] arm64: dts: qcom: sdm845: Add gpi dma node Vinod Koul
2021-01-11 18:23 ` Bjorn Andersson
2021-01-12 4:21 ` Vinod Koul
2021-01-11 15:16 ` Vinod Koul [this message]
2021-01-11 16:04 ` [PATCH 7/7] arm64: dts: qcom: sdm845: enable dma for spi Konrad Dybcio
2021-01-11 17:46 ` Vinod Koul
2021-01-11 20:45 ` Konrad Dybcio
2021-01-12 4:19 ` Vinod Koul
2021-01-11 16:47 ` Doug Anderson
2021-01-11 17:56 ` Vinod Koul
2021-01-13 0:01 ` [PATCH 0/7] Add and enable GPI DMA users Doug Anderson
2021-01-13 3:03 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210111151651.1616813-8-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=amit.pundir@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mka@chromium.org \
--cc=sumit.semwal@linaro.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.