All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Hancock <robert.hancock@calian.com>
To: davem@davemloft.net, kuba@kernel.org, radhey.shyam.pandey@xilinx.com
Cc: linux@armlinux.org.uk, netdev@vger.kernel.org,
	devicetree@vger.kernel.org,
	Robert Hancock <robert.hancock@calian.com>
Subject: [PATCH net-next 2/3] dt-bindings: net: xilinx_axienet: add xlnx,switch-x-sgmii attribute
Date: Fri, 12 Feb 2021 18:23:55 -0600	[thread overview]
Message-ID: <20210213002356.2557207-3-robert.hancock@calian.com> (raw)
In-Reply-To: <20210213002356.2557207-1-robert.hancock@calian.com>

Document the new xlnx,switch-x-sgmii attribute which is used to indicate
that the Ethernet core supports dynamic switching between 1000BaseX and
SGMII.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
---
 Documentation/devicetree/bindings/net/xilinx_axienet.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
index 7360617cdedb..2cd452419ed0 100644
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
@@ -38,6 +38,10 @@ Optional properties:
 		  1 to enable partial TX checksum offload,
 		  2 to enable full TX checksum offload
 - xlnx,rxcsum	: Same values as xlnx,txcsum but for RX checksum offload
+- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to
+		  support both 1000BaseX and SGMII modes. If set, the phy-mode
+		  should be set to match the mode selected on core reset (i.e.
+		  by the basex_or_sgmii core input line).
 - clocks	: AXI bus clock for the device. Refer to common clock bindings.
 		  Used to calculate MDIO clock divisor. If not specified, it is
 		  auto-detected from the CPU clock (but only on platforms where
-- 
2.27.0


  parent reply	other threads:[~2021-02-13  0:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-13  0:23 [PATCH net-next 0/3] Xilinx axienet updates Robert Hancock
2021-02-13  0:23 ` [PATCH net-next 1/3] net: axienet: hook up nway_reset ethtool operation Robert Hancock
2021-02-13  0:23 ` Robert Hancock [this message]
2021-02-13  0:23 ` [PATCH net-next 3/3] net: axienet: Support dynamic switching between 1000BaseX and SGMII Robert Hancock
2021-02-13 16:43   ` Andrew Lunn
2021-02-16 16:19     ` Robert Hancock
2021-02-13  1:45 ` [PATCH net-next 0/3] Xilinx axienet updates patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210213002356.2557207-3-robert.hancock@calian.com \
    --to=robert.hancock@calian.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=radhey.shyam.pandey@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.