[PATCH 7/9] hw/block/pflash_cfi02: Factor out DeviceReset method

["Philippe Mathieu-Daudé" <philmd@redhat.com>]

There is multiple places doing a device reset. Factor that
out in a common method which matches the DeviceReset prototype,
so we can also remove the reset code from the DeviceRealize()
handler. Explicit the device is set in "read array" mode on
reset.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/block/pflash_cfi02.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c
index 2ba77a0171b..484b056b898 100644
--- a/hw/block/pflash_cfi02.c
+++ b/hw/block/pflash_cfi02.c
@@ -193,6 +193,14 @@ static void pflash_mode_read_array(PFlashCFI02 *pfl)
     memory_region_rom_device_set_romd(&pfl->orig_mem, true);
 }
 
+static void pflash_cfi02_reset(DeviceState *dev)
+{
+    PFlashCFI02 *pfl = PFLASH_CFI02(dev);
+
+    trace_pflash_reset();
+    pflash_mode_read_array(pfl);
+}
+
 static size_t pflash_regions_count(PFlashCFI02 *pfl)
 {
     return pfl->cfi_table[0x2c];
@@ -330,8 +338,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
     default:
         /* This should never happen : reset state & treat it as a read*/
         DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
-        pfl->wcycle = 0;
-        pfl->cmd = 0;
+        pflash_cfi02_reset(DEVICE(pfl));
         /* fall through to the read code */
     case 0x80: /* Erase (unlock) */
         /* We accept reads during second unlock sequence... */
@@ -710,10 +717,8 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
 
     /* Reset flash */
  reset_flash:
-    trace_pflash_reset();
     pfl->bypass = 0;
-    pfl->wcycle = 0;
-    pfl->cmd = 0;
+    pflash_cfi02_reset(DEVICE(pfl));
     return;
 
  do_bypass:
@@ -977,6 +982,7 @@ static void pflash_cfi02_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     dc->realize = pflash_cfi02_realize;
+    dc->reset = pflash_cfi02_reset;
     dc->unrealize = pflash_cfi02_unrealize;
     device_class_set_props(dc, pflash_cfi02_properties);
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
-- 
2.26.2