All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: bjorn.andersson@linaro.org, ohad@wizery.com
Cc: arnaud.pouliquen@st.com, mcoquelin.stm32@gmail.com,
	alexandre.torgue@st.com, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 04/17] remoteproc: Properly represent the attached state
Date: Fri, 12 Mar 2021 09:24:40 -0700	[thread overview]
Message-ID: <20210312162453.1234145-5-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <20210312162453.1234145-1-mathieu.poirier@linaro.org>

There is a need to know when a remote processor has been attached
to rather than booted by the remoteproc core.  In order to avoid
manipulating two variables, i.e rproc::autonomous and
rproc::state, get rid of the former and simply use the newly
introduced RPROC_ATTACHED state.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
 drivers/remoteproc/remoteproc_core.c  | 20 +-------------------
 drivers/remoteproc/remoteproc_sysfs.c |  5 +----
 include/linux/remoteproc.h            |  2 --
 3 files changed, 2 insertions(+), 25 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 7b66e1e96e4a..8c7e9f1d50d7 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1444,7 +1444,7 @@ static int __rproc_attach(struct rproc *rproc)
 		goto stop_rproc;
 	}
 
-	rproc->state = RPROC_RUNNING;
+	rproc->state = RPROC_ATTACHED;
 
 	dev_info(dev, "remote processor %s is now attached\n", rproc->name);
 
@@ -1659,14 +1659,6 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
 
 	rproc->state = RPROC_OFFLINE;
 
-	/*
-	 * The remote processor has been stopped and is now offline, which means
-	 * that the next time it is brought back online the remoteproc core will
-	 * be responsible to load its firmware.  As such it is no longer
-	 * autonomous.
-	 */
-	rproc->autonomous = false;
-
 	dev_info(dev, "stopped remote processor %s\n", rproc->name);
 
 	return 0;
@@ -2077,16 +2069,6 @@ int rproc_add(struct rproc *rproc)
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Remind ourselves the remote processor has been attached to rather
-	 * than booted by the remoteproc core.  This is important because the
-	 * RPROC_DETACHED state will be lost as soon as the remote processor
-	 * has been attached to.  Used in firmware_show() and reset in
-	 * rproc_stop().
-	 */
-	if (rproc->state == RPROC_DETACHED)
-		rproc->autonomous = true;
-
 	/* if rproc is marked always-on, request it to boot */
 	if (rproc->auto_boot) {
 		ret = rproc_trigger_auto_boot(rproc);
diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
index 4b4aab0d4c4b..f9694def9b54 100644
--- a/drivers/remoteproc/remoteproc_sysfs.c
+++ b/drivers/remoteproc/remoteproc_sysfs.c
@@ -138,11 +138,8 @@ static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
 	 * If the remote processor has been started by an external
 	 * entity we have no idea of what image it is running.  As such
 	 * simply display a generic string rather then rproc->firmware.
-	 *
-	 * Here we rely on the autonomous flag because a remote processor
-	 * may have been attached to and currently in a running state.
 	 */
-	if (rproc->autonomous)
+	if (rproc->state == RPROC_ATTACHED)
 		firmware = "unknown";
 
 	return sprintf(buf, "%s\n", firmware);
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index b0a57ff73849..6b0a0ed30a03 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -512,7 +512,6 @@ struct rproc_dump_segment {
  * @table_sz: size of @cached_table
  * @has_iommu: flag to indicate if remote processor is behind an MMU
  * @auto_boot: flag to indicate if remote processor should be auto-started
- * @autonomous: true if an external entity has booted the remote processor
  * @dump_segments: list of segments in the firmware
  * @nb_vdev: number of vdev currently handled by rproc
  * @char_dev: character device of the rproc
@@ -549,7 +548,6 @@ struct rproc {
 	size_t table_sz;
 	bool has_iommu;
 	bool auto_boot;
-	bool autonomous;
 	struct list_head dump_segments;
 	int nb_vdev;
 	u8 elf_class;
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: bjorn.andersson@linaro.org, ohad@wizery.com
Cc: arnaud.pouliquen@st.com, mcoquelin.stm32@gmail.com,
	alexandre.torgue@st.com, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 04/17] remoteproc: Properly represent the attached state
Date: Fri, 12 Mar 2021 09:24:40 -0700	[thread overview]
Message-ID: <20210312162453.1234145-5-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <20210312162453.1234145-1-mathieu.poirier@linaro.org>

There is a need to know when a remote processor has been attached
to rather than booted by the remoteproc core.  In order to avoid
manipulating two variables, i.e rproc::autonomous and
rproc::state, get rid of the former and simply use the newly
introduced RPROC_ATTACHED state.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
 drivers/remoteproc/remoteproc_core.c  | 20 +-------------------
 drivers/remoteproc/remoteproc_sysfs.c |  5 +----
 include/linux/remoteproc.h            |  2 --
 3 files changed, 2 insertions(+), 25 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 7b66e1e96e4a..8c7e9f1d50d7 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1444,7 +1444,7 @@ static int __rproc_attach(struct rproc *rproc)
 		goto stop_rproc;
 	}
 
-	rproc->state = RPROC_RUNNING;
+	rproc->state = RPROC_ATTACHED;
 
 	dev_info(dev, "remote processor %s is now attached\n", rproc->name);
 
@@ -1659,14 +1659,6 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
 
 	rproc->state = RPROC_OFFLINE;
 
-	/*
-	 * The remote processor has been stopped and is now offline, which means
-	 * that the next time it is brought back online the remoteproc core will
-	 * be responsible to load its firmware.  As such it is no longer
-	 * autonomous.
-	 */
-	rproc->autonomous = false;
-
 	dev_info(dev, "stopped remote processor %s\n", rproc->name);
 
 	return 0;
@@ -2077,16 +2069,6 @@ int rproc_add(struct rproc *rproc)
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Remind ourselves the remote processor has been attached to rather
-	 * than booted by the remoteproc core.  This is important because the
-	 * RPROC_DETACHED state will be lost as soon as the remote processor
-	 * has been attached to.  Used in firmware_show() and reset in
-	 * rproc_stop().
-	 */
-	if (rproc->state == RPROC_DETACHED)
-		rproc->autonomous = true;
-
 	/* if rproc is marked always-on, request it to boot */
 	if (rproc->auto_boot) {
 		ret = rproc_trigger_auto_boot(rproc);
diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
index 4b4aab0d4c4b..f9694def9b54 100644
--- a/drivers/remoteproc/remoteproc_sysfs.c
+++ b/drivers/remoteproc/remoteproc_sysfs.c
@@ -138,11 +138,8 @@ static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
 	 * If the remote processor has been started by an external
 	 * entity we have no idea of what image it is running.  As such
 	 * simply display a generic string rather then rproc->firmware.
-	 *
-	 * Here we rely on the autonomous flag because a remote processor
-	 * may have been attached to and currently in a running state.
 	 */
-	if (rproc->autonomous)
+	if (rproc->state == RPROC_ATTACHED)
 		firmware = "unknown";
 
 	return sprintf(buf, "%s\n", firmware);
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index b0a57ff73849..6b0a0ed30a03 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -512,7 +512,6 @@ struct rproc_dump_segment {
  * @table_sz: size of @cached_table
  * @has_iommu: flag to indicate if remote processor is behind an MMU
  * @auto_boot: flag to indicate if remote processor should be auto-started
- * @autonomous: true if an external entity has booted the remote processor
  * @dump_segments: list of segments in the firmware
  * @nb_vdev: number of vdev currently handled by rproc
  * @char_dev: character device of the rproc
@@ -549,7 +548,6 @@ struct rproc {
 	size_t table_sz;
 	bool has_iommu;
 	bool auto_boot;
-	bool autonomous;
 	struct list_head dump_segments;
 	int nb_vdev;
 	u8 elf_class;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-03-12 16:26 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12 16:24 [PATCH v8 00/17] remoteproc: Add support for detaching a remote processor Mathieu Poirier
2021-03-12 16:24 ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 01/17] remoteproc: Remove useless check in rproc_del() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 02/17] remoteproc: Rename function rproc_actuate() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 03/17] remoteproc: Add new RPROC_ATTACHED state Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` Mathieu Poirier [this message]
2021-03-12 16:24   ` [PATCH v8 04/17] remoteproc: Properly represent the attached state Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 05/17] remoteproc: Add new get_loaded_rsc_table() to rproc_ops Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 06/17] remoteproc: stm32: Move resource table setup " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 07/17] remoteproc: stm32: Move memory parsing " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 08/17] remoteproc: Add new detach() remoteproc operation Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 09/17] remoteproc: Introduce function __rproc_detach() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 10/17] remoteproc: Introduce function rproc_detach() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 11/17] remoteproc: Properly deal with the resource table when detaching Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 12/17] remoteproc: Properly deal with the resource table when stopping Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 13/17] remoteproc: Properly deal with a kernel panic when attached Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 14/17] remoteproc: Properly deal with a start request " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 15/17] remoteproc: Properly deal with a stop " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 16/17] remoteproc: Properly deal with a detach " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 17/17] remoteproc: Refactor function rproc_cdev_release() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210312162453.1234145-5-mathieu.poirier@linaro.org \
    --to=mathieu.poirier@linaro.org \
    --cc=alexandre.torgue@st.com \
    --cc=arnaud.pouliquen@st.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.