All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-mmc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>
Subject: [PATCH RFT] mmc: renesas_sdhi: enable WAIT_WHILE_BUSY
Date: Thu,  8 Apr 2021 15:34:20 +0200	[thread overview]
Message-ID: <20210408133420.2900-1-wsa+renesas@sang-engineering.com> (raw)

Now that we got the timeout handling in the driver correct, we can use
this capability to avoid polling via the MMC core.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

I had this patch applied while developing all the other patches for
TMIO/SDHI for 5.13 and had no regressions. Further testing is
appreciated, but I am optimistic that we can enable this finally.

 drivers/mmc/host/renesas_sdhi_internal_dmac.c | 4 ++--
 drivers/mmc/host/renesas_sdhi_sys_dmac.c      | 7 ++++---
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index ff97f15e317c..47c795e79c21 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -94,7 +94,7 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = {
 
 static const struct renesas_sdhi_of_data of_rza2_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL |
-			  TMIO_MMC_HAVE_CBSY,
+			  TMIO_MMC_HAVE_CBSY | MMC_CAP_WAIT_WHILE_BUSY,
 	.tmio_ocr_mask	= MMC_VDD_32_33,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_CMD23,
@@ -111,7 +111,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL |
 			  TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_CMD23,
+			  MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY,
 	.capabilities2	= MMC_CAP2_NO_WRITE_PROTECT | MMC_CAP2_MERGE_CAPABLE,
 	.bus_shift	= 2,
 	.scc_offset	= 0x1000,
diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
index c5f789675302..0a3494fcc5e8 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -31,13 +31,14 @@ static const struct renesas_sdhi_of_data of_default_cfg = {
 
 static const struct renesas_sdhi_of_data of_rz_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_32BIT_DATA_PORT |
-			  TMIO_MMC_HAVE_CBSY,
+			  TMIO_MMC_HAVE_CBSY | MMC_CAP_WAIT_WHILE_BUSY,
 	.tmio_ocr_mask	= MMC_VDD_32_33,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
 };
 
 static const struct renesas_sdhi_of_data of_rcar_gen1_compatible = {
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL |
+			  MMC_CAP_WAIT_WHILE_BUSY,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
 	.capabilities2	= MMC_CAP2_NO_WRITE_PROTECT,
 };
@@ -58,7 +59,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen2_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL |
 			  TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_CMD23,
+			  MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY,
 	.capabilities2	= MMC_CAP2_NO_WRITE_PROTECT,
 	.dma_buswidth	= DMA_SLAVE_BUSWIDTH_4_BYTES,
 	.dma_rx_offset	= 0x2000,
-- 
2.30.0


             reply	other threads:[~2021-04-08 13:34 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-08 13:34 Wolfram Sang [this message]
2021-04-09  5:40 ` [PATCH RFT] mmc: renesas_sdhi: enable WAIT_WHILE_BUSY Yoshihiro Shimoda
2021-04-09  9:37   ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210408133420.2900-1-wsa+renesas@sang-engineering.com \
    --to=wsa+renesas@sang-engineering.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.