All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ansuel Smith <ansuelsmth@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 13/14] drivers: net: dsa: qca8k: protect MASTER busy_wait with mdio mutex
Date: Fri, 23 Apr 2021 03:47:39 +0200	[thread overview]
Message-ID: <20210423014741.11858-14-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20210423014741.11858-1-ansuelsmth@gmail.com>

MDIO_MASTER operation have a dedicated busy wait that is not protected
by the mdio mutex. This can cause situation where the MASTER operation
is done and a normal operation is executed between the MASTER read/write
and the MASTER busy_wait. Rework the qca8k_mdio_read/write function to
address this issue by binding the lock for the whole MASTER operation
and not only the mdio read/write common operation.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 59 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 50 insertions(+), 9 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 88a0234f1a7b..d2f5e0b1c721 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -609,9 +609,33 @@ qca8k_port_to_phy(int port)
 	return port - 1;
 }
 
+static int
+qca8k_mdio_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
+{
+	unsigned long timeout;
+	u16 r1, r2, page;
+
+	qca8k_split_addr(reg, &r1, &r2, &page);
+
+	timeout = jiffies + msecs_to_jiffies(20);
+
+	/* loop until the busy flag has cleared */
+	do {
+		u32 val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
+		int busy = val & mask;
+
+		if (!busy)
+			break;
+		cond_resched();
+	} while (!time_after_eq(jiffies, timeout));
+
+	return time_after_eq(jiffies, timeout);
+}
+
 static int
 qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
 {
+	u16 r1, r2, page;
 	u32 phy, val;
 	int ret;
 
@@ -627,10 +651,17 @@ qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
 	      QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
 	      QCA8K_MDIO_MASTER_DATA(data);
 
-	qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+	qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
+
+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+	qca8k_set_page(priv->bus, page);
+	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
 
-	ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
-			      QCA8K_MDIO_MASTER_BUSY);
+	ret = qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+				   QCA8K_MDIO_MASTER_BUSY);
+
+	mutex_unlock(&priv->bus->mdio_lock);
 
 	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
 			QCA8K_MDIO_MASTER_EN);
@@ -641,6 +672,7 @@ qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
 static int
 qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
 {
+	u16 r1, r2, page;
 	u32 phy, val;
 
 	if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
@@ -654,14 +686,23 @@ qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
 	      QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
 	      QCA8K_MDIO_MASTER_REG_ADDR(regnum);
 
-	qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+	qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
 
-	if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
-			    QCA8K_MDIO_MASTER_BUSY))
-		return -ETIMEDOUT;
+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+	qca8k_set_page(priv->bus, page);
+	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
+
+	if (qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+				 QCA8K_MDIO_MASTER_BUSY))
+		val = -ETIMEDOUT;
+	else
+		val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
+
+	mutex_unlock(&priv->bus->mdio_lock);
 
-	val = (qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL) &
-		QCA8K_MDIO_MASTER_DATA_MASK);
+	if (val >= 0)
+		val &= QCA8K_MDIO_MASTER_DATA_MASK;
 
 	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
 			QCA8K_MDIO_MASTER_EN);
-- 
2.30.2


  parent reply	other threads:[~2021-04-23  1:49 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-23  1:47 [PATCH 00/14] Multiple improvement to qca8k stability Ansuel Smith
2021-04-23  1:47 ` [PATCH 01/14] drivers: net: dsa: qca8k: handle error with set_page Ansuel Smith
2021-04-23  1:52   ` Florian Fainelli
2021-04-23  1:47 ` [PATCH 02/14] drivers: net: dsa: qca8k: tweak internal delay to oem spec Ansuel Smith
2021-04-23  1:53   ` Florian Fainelli
2021-04-23  1:57     ` Ansuel Smith
2021-04-23  1:58       ` Florian Fainelli
2021-04-23 12:25   ` Andrew Lunn
2021-04-23  1:47 ` [PATCH 03/14] drivers: net: mdio: mdio-ip8064: improve busy wait delay Ansuel Smith
2021-04-23  1:56   ` Florian Fainelli
2021-04-23  2:03     ` Ansuel Smith
2021-04-23 12:38   ` Andrew Lunn
2021-04-23  1:47 ` [PATCH 04/14] drivers: net: dsa: qca8k: apply suggested packet priority Ansuel Smith
2021-04-23  1:47 ` [PATCH 05/14] drivers: net: dsa: qca8k: add support for qca8327 switch Ansuel Smith
2021-04-23 12:42   ` Andrew Lunn
2021-04-23  1:47 ` [PATCH 06/14] devicetree: net: dsa: qca8k: Document new compatible qca8327 Ansuel Smith
2021-04-23  1:47 ` [PATCH 07/14] drivers: net: dsa: qca8k: limit priority tweak to qca8337 switch Ansuel Smith
2021-04-23  1:59   ` Florian Fainelli
2021-04-23  1:47 ` [PATCH 08/14] drivers: net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327 Ansuel Smith
2021-04-23  1:47 ` [PATCH 09/14] drivers: net: dsa: qca8k: add support for switch rev Ansuel Smith
2021-04-23  1:47 ` [PATCH 10/14] drivers: net: dsa: qca8k: add support for specific QCA access function Ansuel Smith
2021-04-23 12:47   ` Andrew Lunn
2021-04-23  1:47 ` [PATCH 11/14] drivers: net: dsa: qca8k: apply switch revision fix Ansuel Smith
2021-04-23  2:02   ` Florian Fainelli
2021-04-24 21:18     ` Ansuel Smith
2021-04-24 21:49       ` Heiner Kallweit
2021-04-25  1:09       ` Florian Fainelli
2021-04-25  1:19         ` Ansuel Smith
2021-04-25  4:45       ` DENG Qingfang
2021-04-25 11:59         ` Ansuel Smith
2021-04-25 14:33           ` Andrew Lunn
2021-04-23  1:47 ` [PATCH 12/14] drivers: net: dsa: qca8k: clear MASTER_EN after phy read/write Ansuel Smith
2021-04-23  1:47 ` Ansuel Smith [this message]
2021-04-23 12:53   ` [PATCH 13/14] drivers: net: dsa: qca8k: protect MASTER busy_wait with mdio mutex Andrew Lunn
2021-04-23  1:47 ` [PATCH 14/14] drivers: net: dsa: qca8k: enlarge mdio delay and timeout Ansuel Smith
2021-04-23  1:51 ` [PATCH 00/14] Multiple improvement to qca8k stability Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210423014741.11858-14-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.