All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <kristo@kernel.org>
To: u-boot@lists.denx.de
Subject: [PATCHv4 24/26] configs: j7200_evm_r5: Enable raw access power management features
Date: Tue, 11 May 2021 11:31:02 +0300	[thread overview]
Message-ID: <20210511083104.10868-25-kristo@kernel.org> (raw)
In-Reply-To: <20210511083104.10868-1-kristo@kernel.org>

From: Dave Gerlach <d-gerlach@ti.com>

Sysfw is not going to provide access to power management features in the
new architecture, so SPL must implement these itself. Enable all the raw
register access based clock + power domain drivers.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>
---
 configs/j7200_evm_r5_defconfig | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
index b20698fd0e..97eb1b3c9a 100644
--- a/configs/j7200_evm_r5_defconfig
+++ b/configs/j7200_evm_r5_defconfig
@@ -75,7 +75,7 @@ CONFIG_SPL_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
-CONFIG_CLK_TI_SCI=y
+# CONFIG_CLK_TI_SCI is not set
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
@@ -111,7 +111,7 @@ CONFIG_SPL_PINCTRL=y
 # CONFIG_SPL_PINCTRL_GENERIC is not set
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_POWER_DOMAIN=y
-CONFIG_TI_SCI_POWER_DOMAIN=y
+# CONFIG_TI_SCI_POWER_DOMAIN is not set
 CONFIG_K3_SYSTEM_CONTROLLER=y
 CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_DM_RESET=y
@@ -143,3 +143,13 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6164
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_FS_EXT4=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_TI_K3=y
+CONFIG_TI_POWER_DOMAIN=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_LIB_RATIONAL=y
+CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_SPL_CLK_K3_PLL=y
+CONFIG_SPL_CLK_K3=y
+CONFIG_K3_DM_FW=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
-- 
2.17.1

  parent reply	other threads:[~2021-05-11  8:31 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11  8:30 [PATCHv4 00/26] J72xx: HSM rearch support series Tero Kristo
2021-05-11  8:30 ` [PATCHv4 01/26] lib: rational: copy the rational fraction lib routines from Linux Tero Kristo
2021-05-11  8:30 ` [PATCHv4 02/26] arm: mach-k3: introduce new config option for sysfw split Tero Kristo
2021-05-11  8:30 ` [PATCHv4 03/26] remoteproc: k3-r5: remove sysfw PM calls if not supported Tero Kristo
2021-05-11  8:30 ` [PATCHv4 04/26] common: fit: Update board_fit_image_post_process() to pass fit and node_offset Tero Kristo
2021-05-11  8:30 ` [PATCHv4 05/26] clk: fixed_rate: add API for directly registering fixed rate clocks Tero Kristo
2021-05-11  8:30 ` [PATCHv4 06/26] clk: fix clock tree dump to properly dump out every registered clock Tero Kristo
2021-05-11  8:30 ` [PATCHv4 07/26] clk: do not attempt to fetch clock pointer with null device Tero Kristo
2021-05-11  8:30 ` [PATCHv4 08/26] clk: add support for setting clk rate from cmdline Tero Kristo
2021-05-11  8:30 ` [PATCHv4 09/26] clk: sci-clk: fix return value of set_rate Tero Kristo
2021-05-11  8:30 ` [PATCHv4 10/26] clk: fix assigned-clocks to pass with deferring provider Tero Kristo
2021-05-11  8:30 ` [PATCHv4 11/26] clk: fix set_rate to clean up cached rates for the hierarchy Tero Kristo
2021-05-11  8:30 ` [PATCHv4 12/26] clk: add support for TI K3 SoC PLL Tero Kristo
2021-05-11  8:30 ` [PATCHv4 13/26] clk: add support for TI K3 SoC clocks Tero Kristo
2021-05-11  8:30 ` [PATCHv4 14/26] power: domain: Introduce driver for raw TI K3 PDs Tero Kristo
2021-05-11 22:44   ` Jaehoon Chung
2021-05-11  8:30 ` [PATCHv4 15/26] cmd: ti: pd: Add debug command for K3 power domains Tero Kristo
2021-05-11 22:44   ` Jaehoon Chung
2021-05-11  8:30 ` [PATCHv4 16/26] tools: k3_fit_atf: add DM binary to the FIT image Tero Kristo
2021-05-11  8:30 ` [PATCHv4 17/26] arm: mach-k3: Add platform data for j721e and j7200 Tero Kristo
2021-05-11  8:30 ` [PATCHv4 18/26] arm: mach-k3: add support for detecting firmware images from FIT Tero Kristo
2021-05-11  8:30 ` [PATCHv4 19/26] arm: mach-k3: do board config for PM only if supported Tero Kristo
2021-05-11  8:30 ` [PATCHv4 20/26] arm: mach-k3: common: Drop main r5 start Tero Kristo
2021-05-11  8:30 ` [PATCHv4 21/26] arm: mach-k3: sysfw-loader: pass boardcfg to sciserver Tero Kristo
2021-05-11  8:31 ` [PATCHv4 22/26] arm: mach-k3: j721e_init: Force early probe of clk-k3 driver Tero Kristo
2021-05-11  8:31 ` [PATCHv4 23/26] configs: j721e_evm_r5: Enable raw access power management features Tero Kristo
2021-05-11  8:31 ` Tero Kristo [this message]
2021-05-11  8:31 ` [PATCHv4 25/26] board: ti: j72xx: README: update build instructions and image formats Tero Kristo
2021-05-11  8:31 ` [PATCHv4 26/26] arm: dts: k3-j72xx: correct MCU timer1 frequency Tero Kristo
2021-06-02 16:26 ` [PATCHv4 00/26] J72xx: HSM rearch support series Lokesh Vutla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210511083104.10868-25-kristo@kernel.org \
    --to=kristo@kernel.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.