Hi!

> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> 
> [ Upstream commit c561740e7cfefaf3003a256f3a0cd9f8a069137c ]
> 
> WSA881x powerdown pin is connected to GPIO1 not gpio2, so correct this.
> This was working so far due to a shift bug in gpio driver, however
> once that is fixed this will stop working, so fix this!

I don't see the correspoing update to the driver this talks about.

Do we have corresponding driver in 5.10 and was it fixed to match?

Best regards,
									Pavel

> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -1015,7 +1015,7 @@
>  		left_spkr: wsa8810-left{
>  			compatible = "sdw10217201000";
>  			reg = <0 1>;
> -			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
> +			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
>  			#thermal-sensor-cells = <0>;
>  			sound-name-prefix = "SpkrLeft";
>  			#sound-dai-cells = <0>;
> @@ -1023,7 +1023,7 @@
>  
>  		right_spkr: wsa8810-right{
>  			compatible = "sdw10217201000";
> -			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
> +			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
>  			reg = <0 2>;
>  			#thermal-sensor-cells = <0>;
>  			sound-name-prefix = "SpkrRight";

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany