All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 09/11] powerpc/64: interrupt soft-enable race fix
Date: Fri, 21 May 2021 21:44:20 +1000	[thread overview]
Message-ID: <20210521114422.3179350-10-npiggin@gmail.com> (raw)
In-Reply-To: <20210521114422.3179350-1-npiggin@gmail.com>

Prevent interrupt restore from allowing racing hard interrupts going
ahead of previous soft-pending ones, by using the soft-masked restart
handler to allow a store to clear the soft-mask while knowing nothing
is soft-pending.

This probably doesn't matter much in practice, but it's a simple
demonstrator / test case to exercise the restart table logic.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/irq.c | 95 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 72cb45393ef2..8428caf3194e 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -217,6 +217,100 @@ static inline void replay_soft_interrupts_irqrestore(void)
 #define replay_soft_interrupts_irqrestore() replay_soft_interrupts()
 #endif
 
+#ifdef CONFIG_CC_HAS_ASM_GOTO
+notrace void arch_local_irq_restore(unsigned long mask)
+{
+	unsigned char irq_happened;
+
+	/* Write the new soft-enabled value if it is a disable */
+	if (mask) {
+		irq_soft_mask_set(mask);
+		return;
+	}
+
+	/*
+	 * After the stb, interrupts are unmasked and there are no interrupts
+	 * pending replay. The restart sequence makes this atomic with
+	 * respect to soft-masked interrupts. If this was just a simple code
+	 * sequence, a soft-masked interrupt could become pending right after
+	 * the comparison and before the stb.
+	 *
+	 * This allows interrupts to be unmasked without hard disabling, and
+	 * also without new hard interrupts coming in ahead of pending ones.
+	 */
+	asm_volatile_goto(
+"1:					\n"
+"		lbz	9,%0(13)	\n"
+"		cmpwi	9,0		\n"
+"		bne	%l[happened]	\n"
+"		stb	9,%1(13)	\n"
+"2:					\n"
+		RESTART_TABLE(1b, 2b, 1b)
+	: : "i" (offsetof(struct paca_struct, irq_happened)),
+	    "i" (offsetof(struct paca_struct, irq_soft_mask))
+	: "cr0", "r9"
+	: happened);
+
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+		WARN_ON_ONCE(!(mfmsr() & MSR_EE));
+
+	return;
+
+happened:
+	irq_happened = get_irq_happened();
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+		WARN_ON_ONCE(!irq_happened);
+
+	if (irq_happened == PACA_IRQ_HARD_DIS) {
+		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+			WARN_ON_ONCE(mfmsr() & MSR_EE);
+		irq_soft_mask_set(IRQS_ENABLED);
+		local_paca->irq_happened = 0;
+		__hard_irq_enable();
+		return;
+	}
+
+	/* Have interrupts to replay, need to hard disable first */
+	if (!(irq_happened & PACA_IRQ_HARD_DIS)) {
+		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
+			if (!(mfmsr() & MSR_EE)) {
+				/*
+				 * An interrupt could have come in and cleared
+				 * MSR[EE] and set IRQ_HARD_DIS, so check
+				 * IRQ_HARD_DIS again and warn if it is still
+				 * clear.
+				 */
+				irq_happened = get_irq_happened();
+				WARN_ON_ONCE(!(irq_happened & PACA_IRQ_HARD_DIS));
+			}
+		}
+		__hard_irq_disable();
+		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+	} else {
+		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
+			if (WARN_ON_ONCE(mfmsr() & MSR_EE))
+				__hard_irq_disable();
+		}
+	}
+
+	/*
+	 * Disable preempt here, so that the below preempt_enable will
+	 * perform resched if required (a replayed interrupt may set
+	 * need_resched).
+	 */
+	preempt_disable();
+	irq_soft_mask_set(IRQS_ALL_DISABLED);
+	trace_hardirqs_off();
+
+	replay_soft_interrupts_irqrestore();
+	local_paca->irq_happened = 0;
+
+	trace_hardirqs_on();
+	irq_soft_mask_set(IRQS_ENABLED);
+	__hard_irq_enable();
+	preempt_enable();
+}
+#else
 notrace void arch_local_irq_restore(unsigned long mask)
 {
 	unsigned char irq_happened;
@@ -288,6 +382,7 @@ notrace void arch_local_irq_restore(unsigned long mask)
 	__hard_irq_enable();
 	preempt_enable();
 }
+#endif
 EXPORT_SYMBOL(arch_local_irq_restore);
 
 /*
-- 
2.23.0


  parent reply	other threads:[~2021-05-21 11:49 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 11:44 [PATCH v2 00/11] powerpc/64: fast interrupt exits Nicholas Piggin
2021-05-21 11:44 ` [PATCH v2 01/11] powerpc: remove interrupt exit helpers unused argument Nicholas Piggin
2021-05-21 17:46   ` Christophe Leroy
2021-05-21 11:44 ` [PATCH v2 02/11] powerpc/64s: introduce different functions to return from SRR vs HSRR interrupts Nicholas Piggin
2021-05-21 11:44 ` [PATCH v2 03/11] powerpc/64s: avoid reloading (H)SRR registers if they are still valid Nicholas Piggin
2021-05-21 11:44 ` [PATCH v2 04/11] powerpc/64: handle MSR EE and RI in interrupt entry wrapper Nicholas Piggin
2021-05-21 11:44 ` [PATCH v2 05/11] powerpc/64: move interrupt return asm to interrupt_64.S Nicholas Piggin
2021-05-21 11:44 ` [PATCH v2 06/11] powerpc/64s: system call avoid setting MSR[RI] until we set MSR[EE] Nicholas Piggin
2021-05-21 11:44 ` [PATCH v2 07/11] powerpc/64s: save one more register in the masked interrupt handler Nicholas Piggin
2021-05-21 11:44 ` [PATCH v2 08/11] powerpc/64: allow alternate return locations for soft-masked interrupts Nicholas Piggin
2021-05-21 11:44 ` Nicholas Piggin [this message]
2021-05-21 11:44 ` [PATCH v2 10/11] powerpc/64: treat low kernel text as irqs soft-masked Nicholas Piggin
2021-05-21 11:44 ` [PATCH v2 11/11] powerpc/64: use interrupt restart table to speed up return from interrupt Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210521114422.3179350-10-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.