All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sujit Kautkar <sujitka@chromium.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: Sibi Sankar <sibis@codeaurora.org>,
	Doug Anderson <dianders@chromium.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	Sujit Kautkar <sujitka@chromium.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
Date: Wed,  2 Jun 2021 12:13:39 -0700	[thread overview]
Message-ID: <20210602121313.v3.1.Ia83c80aec3b9535f01441247b6c3fb6f80b0ec7f@changeid> (raw)
In-Reply-To: <20210602191338.1995827-1-sujitka@chromium.org>

Move sdc1/sdc2 pinconf from SoC specific DT file to board specific DT
files

Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
---

(no changes since v1)

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi         | 102 -------------------
 3 files changed, 204 insertions(+), 102 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a7..07133e0af581a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -598,4 +598,106 @@ pinconf-rx {
 			bias-pull-up;
 		};
 	};
+
+	sdc1_on: sdc1-on {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 609f0ceafd095..d128a0ed6ad3a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1540,4 +1540,106 @@ pinconf {
 			drive-strength = <2>;
 		};
 	};
+
+	sdc1_on: sdc1-on {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 1fc328ba0403e..0630a9c410b58 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1872,108 +1872,6 @@ pinmux {
 					function = "lpass_ext";
 				};
 			};
-
-			sdc1_on: sdc1-on {
-				pinconf-clk {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-data {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-rclk {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc1_off: sdc1-off {
-				pinconf-clk {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-data {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-rclk {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc2_on: sdc2-on {
-				pinconf-clk {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-data {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-sd-cd {
-					pins = "gpio69";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-			};
-
-			sdc2_off: sdc2-off {
-				pinconf-clk {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-data {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-sd-cd {
-					pins = "gpio69";
-					bias-disable;
-					drive-strength = <2>;
-				};
-			};
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
-- 
2.32.0.rc0.204.g9fa02ecfa5-goog


  reply	other threads:[~2021-06-02 19:14 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-02 19:13 [PATCH v3 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
2021-06-02 19:13 ` Sujit Kautkar [this message]
2021-06-03 20:23   ` [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Doug Anderson
2021-06-02 19:13 ` [PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up Sujit Kautkar
2021-06-03 20:33   ` Doug Anderson
2021-06-03 21:16     ` Sujit Kautkar
2021-06-10 14:50 ` [PATCH v3 0/2] Update sd card pinconf for sc7180 DT patchwork-bot+linux-arm-msm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210602121313.v3.1.Ia83c80aec3b9535f01441247b6c3fb6f80b0ec7f@changeid \
    --to=sujitka@chromium.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.