All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org
Cc: Paul Greenwalt <paul.greenwalt@intel.com>,
	netdev@vger.kernel.org, sassmann@redhat.com,
	anthony.l.nguyen@intel.com,
	Tony Brelinski <tonyx.brelinski@intel.com>
Subject: [PATCH net 4/6] ice: report supported and advertised autoneg using PHY capabilities
Date: Fri,  4 Jun 2021 09:08:14 -0700	[thread overview]
Message-ID: <20210604160816.3391716-5-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20210604160816.3391716-1-anthony.l.nguyen@intel.com>

From: Paul Greenwalt <paul.greenwalt@intel.com>

Ethtool incorrectly reported supported and advertised auto-negotiation
settings for a backplane PHY image which did not support auto-negotiation.
This can occur when using media or PHY type for reporting ethtool
supported and advertised auto-negotiation settings.

Remove setting supported and advertised auto-negotiation settings based
on PHY type in ice_phy_type_to_ethtool(), and MAC type in
ice_get_link_ksettings().

Ethtool supported and advertised auto-negotiation settings should be
based on the PHY image using the AQ command get PHY capabilities with
media. Add setting supported and advertised auto-negotiation settings
based get PHY capabilities with media in ice_get_link_ksettings().

Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 51 +++-----------------
 1 file changed, 6 insertions(+), 45 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index d9ddd0bcf65f..99301ad95290 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -1773,49 +1773,6 @@ ice_phy_type_to_ethtool(struct net_device *netdev,
 		ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB,
 						100000baseKR4_Full);
 	}
-
-	/* Autoneg PHY types */
-	if (phy_types_low & ICE_PHY_TYPE_LOW_100BASE_TX ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_1000BASE_T ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_1000BASE_KX ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_2500BASE_T ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_2500BASE_KX ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_5GBASE_T ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_5GBASE_KR ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_10GBASE_T ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_10GBASE_KR_CR1 ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_25GBASE_T ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_25GBASE_CR ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_25GBASE_CR_S ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_25GBASE_CR1 ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_25GBASE_KR ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_25GBASE_KR_S ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_25GBASE_KR1 ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_40GBASE_CR4 ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_40GBASE_KR4) {
-		ethtool_link_ksettings_add_link_mode(ks, supported,
-						     Autoneg);
-		ethtool_link_ksettings_add_link_mode(ks, advertising,
-						     Autoneg);
-	}
-	if (phy_types_low & ICE_PHY_TYPE_LOW_50GBASE_CR2 ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_50GBASE_KR2 ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_50GBASE_CP ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_50GBASE_KR_PAM4) {
-		ethtool_link_ksettings_add_link_mode(ks, supported,
-						     Autoneg);
-		ethtool_link_ksettings_add_link_mode(ks, advertising,
-						     Autoneg);
-	}
-	if (phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_CR4 ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_KR4 ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_KR_PAM4 ||
-	    phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_CP2) {
-		ethtool_link_ksettings_add_link_mode(ks, supported,
-						     Autoneg);
-		ethtool_link_ksettings_add_link_mode(ks, advertising,
-						     Autoneg);
-	}
 }
 
 #define TEST_SET_BITS_TIMEOUT	50
@@ -1972,9 +1929,7 @@ ice_get_link_ksettings(struct net_device *netdev,
 		ks->base.port = PORT_TP;
 		break;
 	case ICE_MEDIA_BACKPLANE:
-		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
 		ethtool_link_ksettings_add_link_mode(ks, supported, Backplane);
-		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
 		ethtool_link_ksettings_add_link_mode(ks, advertising,
 						     Backplane);
 		ks->base.port = PORT_NONE;
@@ -2049,6 +2004,12 @@ ice_get_link_ksettings(struct net_device *netdev,
 	if (caps->link_fec_options & ICE_AQC_PHY_FEC_25G_RS_CLAUSE91_EN)
 		ethtool_link_ksettings_add_link_mode(ks, supported, FEC_RS);
 
+	/* Set supported and advertised autoneg */
+	if (ice_is_phy_caps_an_enabled(caps)) {
+		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
+		ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
+	}
+
 done:
 	kfree(caps);
 	return err;
-- 
2.26.2


  parent reply	other threads:[~2021-06-04 16:09 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-04 16:08 [PATCH net 0/6][pull request] Intel Wired LAN Driver Updates 2021-06-04 Tony Nguyen
2021-06-04 16:08 ` [PATCH net 1/6] ice: Fix allowing VF to request more/less queues via virtchnl Tony Nguyen
2021-06-04 16:08 ` [PATCH net 2/6] ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared Tony Nguyen
2021-06-04 16:08 ` [PATCH net 3/6] ice: handle the VF VSI rebuild failure Tony Nguyen
2021-06-04 16:08 ` Tony Nguyen [this message]
2021-06-04 16:08 ` [PATCH net 5/6] ice: Allow all LLDP packets from PF to Tx Tony Nguyen
2021-06-04 16:08 ` [PATCH net 6/6] virtchnl: Add missing padding to virtchnl_proto_hdrs Tony Nguyen
2021-06-04 21:40 ` [PATCH net 0/6][pull request] Intel Wired LAN Driver Updates 2021-06-04 patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210604160816.3391716-5-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=paul.greenwalt@intel.com \
    --cc=sassmann@redhat.com \
    --cc=tonyx.brelinski@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.