All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: linux-staging@lists.linux.dev
Cc: gregkh@linuxfoundation.org, neil@brown.name
Subject: [PATCH v2 4/6] staging: mt7621-dts: move some properties into root port child nodes
Date: Sun,  6 Jun 2021 18:13:56 +0200	[thread overview]
Message-ID: <20210606161358.7114-5-sergio.paracuellos@gmail.com> (raw)
In-Reply-To: <20210606161358.7114-1-sergio.paracuellos@gmail.com>

After a review of the bindings 'clocks', 'resets' and 'phys' must
be moved into root port child nodes. Hence, move all of them.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/staging/mt7621-dts/mt7621.dtsi | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 840ba0c3ffed..ecfe2f2cf75a 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -500,15 +500,6 @@ pcie: pcie@1e140000 {
 
 		status = "disabled";
 
-		resets = <&rstctrl 24>, <&rstctrl 25>, <&rstctrl 26>;
-		reset-names = "pcie0", "pcie1", "pcie2";
-		clocks = <&sysc MT7621_CLK_PCIE0>,
-			 <&sysc MT7621_CLK_PCIE1>,
-			 <&sysc MT7621_CLK_PCIE2>;
-		clock-names = "pcie0", "pcie1", "pcie2";
-		phys = <&pcie0_phy 1>, <&pcie2_phy 0>;
-		phy-names = "pcie-phy0", "pcie-phy2";
-
 		reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 
 		pcie@0,0 {
@@ -519,6 +510,10 @@ pcie@0,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstctrl 24>;
+			clocks = <&sysc MT7621_CLK_PCIE0>;
+			phys = <&pcie0_phy 1>;
+			phy-names = "pcie-phy0";
 			ranges;
 		};
 
@@ -530,6 +525,10 @@ pcie@1,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstctrl 25>;
+			clocks = <&sysc MT7621_CLK_PCIE1>;
+			phys = <&pcie0_phy 1>;
+			phy-names = "pcie-phy1";
 			ranges;
 		};
 
@@ -541,6 +540,10 @@ pcie@2,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstctrl 26>;
+			clocks = <&sysc MT7621_CLK_PCIE2>;
+			phys = <&pcie2_phy 0>;
+			phy-names = "pcie-phy2";
 			ranges;
 		};
 	};
-- 
2.25.1


  parent reply	other threads:[~2021-06-06 16:14 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-06 16:13 [PATCH v2 0/6] staging: mt7621-pci: some required changes after first review Sergio Paracuellos
2021-06-06 16:13 ` [PATCH v2 1/6] staging: mt7621-pci: make cleaner 'mt7621_pcie_enable_ports' Sergio Paracuellos
2021-06-06 16:13 ` [PATCH v2 2/6] staging: mt7621-pci: remove 'RALINK_PCI_BAR0SETUP_ADDR' definition Sergio Paracuellos
2021-06-06 16:13 ` [PATCH v2 3/6] staging: mt7621-pci: use {readl|writel}_relaxed instead of readl/writel Sergio Paracuellos
2021-06-06 16:13 ` Sergio Paracuellos [this message]
2021-06-06 16:13 ` [PATCH v2 5/6] staging: mt7621-pci: parse some dt properties from root port child nodes Sergio Paracuellos
2021-06-06 16:13 ` [PATCH v2 6/6] staging: mt7621-pci: make use of 'pcie_port_write' Sergio Paracuellos

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210606161358.7114-5-sergio.paracuellos@gmail.com \
    --to=sergio.paracuellos@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=neil@brown.name \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.