All of lore.kernel.org
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	<linux-omap@vger.kernel.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Yegor Yefremov <yegorslists@googlemail.com>,
	Christina Quast <cquast@hanoverdisplays.com>
Subject: [PATCH next 01/15] ARM: dts: am335x-baltos: switch to new cpsw switch drv
Date: Sat, 12 Jun 2021 04:14:22 +0300	[thread overview]
Message-ID: <20210612011436.10437-2-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20210612011436.10437-1-grygorii.strashko@ti.com>

The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch OnRISC Baltos and NetCom/Cam boards to use new cpsw switch
driver. Those boards have or 2 Ext. port wired and configured in dual_mac
mode by default, or only 1 Ext. port.

Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Christina Quast <cquast@hanoverdisplays.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am335x-baltos-ir2110.dts   | 10 +++++-----
 arch/arm/boot/dts/am335x-baltos-ir3220.dts   |  8 ++++----
 arch/arm/boot/dts/am335x-baltos-ir5221.dts   |  8 ++++----
 arch/arm/boot/dts/am335x-baltos.dtsi         |  5 ++---
 arch/arm/boot/dts/am335x-netcan-plus-1xx.dts | 10 +++++-----
 arch/arm/boot/dts/am335x-netcom-plus-2xx.dts | 10 +++++-----
 arch/arm/boot/dts/am335x-netcom-plus-8xx.dts | 10 +++++-----
 7 files changed, 30 insertions(+), 31 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 56915b6d818d..daf4cb398070 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -58,21 +58,21 @@
 	dr_mode = "host";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index d8d60398d803..2123bd589484 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -103,18 +103,18 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	fixed-link {
 		speed = <100>;
 		full-duplex;
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 8096d459b93f..2f3872dbf4f4 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -120,18 +120,18 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	fixed-link {
 		speed = <100>;
 		full-duplex;
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 1103a2cb836f..366702630290 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -339,16 +339,15 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
index 8303b832aa50..57e756b0f192 100644
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -61,21 +61,21 @@
 	dr_mode = "host";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
index f8e0e95a751f..c6cc1c6218a9 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -76,20 +76,20 @@
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
index a4e137527215..96dffd3ffd85 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -96,20 +96,20 @@
 	};
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
-- 
2.17.1


  reply	other threads:[~2021-06-12  1:15 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-12  1:14 [PATCH next 00/15] ARM: dts: am335x: switch rest boards to new cpsw switch drv Grygorii Strashko
2021-06-12  1:14 ` Grygorii Strashko [this message]
2021-06-12  1:14 ` [PATCH next 02/15] ARM: dts: am335x-nano: switch " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 03/15] ARM: dts: am335x-chiliboard: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 04/15] ARM: dts: am335x-cm-t335: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 05/15] ARM: dts: am335x-igep0033: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 06/15] ARM: dts: am335x-lxm: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 07/15] ARM: dts: am335x-moxa-uc: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 08/15] ARM: dts: am335x-myirtech: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 09/15] ARM: dts: am335x-osd3358-sm-red: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 10/15] ARM: dts: am335x-pdu001: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 11/15] ARM: dts: am335x-pepper: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 12/15] ARM: dts: am335x-phycore: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 13/15] ARM: dts: am335x-shc: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 14/15] ARM: dts: am335x-sl50: " Grygorii Strashko
2021-06-12  1:14 ` [PATCH next 15/15] ARM: dts: am33xx: update ethernet aliases Grygorii Strashko
2021-08-06  6:29 ` [PATCH next 00/15] ARM: dts: am335x: switch rest boards to new cpsw switch drv Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210612011436.10437-2-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=cquast@hanoverdisplays.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    --cc=yegorslists@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.