Re: 回信: Re: [v9,23/28] mtd: spi-nor-core: Perform a Soft Reset on shutdown

[Pratyush Yadav <p.yadav@ti.com>]

On 21/06/21 09:59AM, jaimeliao@mxic.com.tw wrote:
> 
> Hi Pratyush
> 
> > Hi,
> > 
> > On 18/06/21 04:55PM, jaimeliao@mxic.com.tw wrote:
> > > 
> > > Hi Pratyush
> > > 
> > > 
> > > +#ifdef CONFIG_SPI_FLASH_SOFT_RESET
> > > +/**
> > > + * spi_nor_soft_reset() - perform the JEDEC Software Reset sequence
> > > + * @nor:                the spi_nor structure
> > > + *
> > > + * This function can be used to switch from Octal DTR mode to legacy 
> mode 
> > > on a
> > > + * flash that supports it. The soft reset is executed in Octal DTR 
> mode.
> > > + *
> > > + * Return: 0 for success, -errno for failure.
> > > + */
> > > +static int spi_nor_soft_reset(struct spi_nor *nor)
> > > +{
> > > +                struct spi_mem_op op;
> > > +                int ret;
> > > +                enum spi_nor_cmd_ext ext;
> > > +
> > > +                ext = nor->cmd_ext_type;
> > > +                nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
> > > According JEDEC, cmd_ext_type has two different types, REPEAT and 
> INVERT.
> > > Some Flash vendor using "INVERT" as cmd_ext_type so that it is not 
> > > suitable for hard coding the type as REPEAT.
> > > Sending twice reset command with different types is clumsy but useful 
> > > before read ID for getting Flash information.
> > > It would be great if you have any other ideas for this part.
> > 
> > It is possible to discover the extension type from BFPT (if the flash 
> > supports it, that is). But this function is supposed to be called before 
> 
> > anything else to make sure the flash is in a sane state. For that 
> > reason, I don't think SFDP would be a viable approach.
> > 
> > Executing it twice might be a viable option. We need to see how flash 
> > that expect invert react to a repeat opcode, and vice versa.
> > 
> > Anyway, I don't think this is a problem for now. Both the 8D-8D-8D 
> > capable flashes supported with this series expect a repeat opcode.
> According Macronix SPI-NOR octal bus Flash datasheet.
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf
> Most of SPI-NOR octal bus Flash are all need invert extension opcode in 
> octal dtr mode.
> I think repeat and invert opcode are necessary for different vendor Flash.

Both repeat and invert opcodes are implemented by this series. They are 
just not used for the soft reset since we don't know which flash we are 
dealing with yet. Let's look at that problem once we actually have to 
support flashes with inverted opcodes.

> > 
> > > 
> > > +
> > > +                op = (struct 
> > > spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRSTEN, 0),
> > > +                                                SPI_MEM_OP_NO_DUMMY,
> > > +                                                SPI_MEM_OP_NO_ADDR,
> > > +                                                SPI_MEM_OP_NO_DATA);
> > > +                spi_nor_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);
> > > +                ret = spi_mem_exec_op(nor->spi, &op);
> > > +                if (ret) {
> > > +                                dev_warn(nor->dev, "Software reset 
> enable 
> > > failed: %d\n", ret);
> > > +                                goto out;
> > > +                }
> > > +
> > > +                op = (struct 
> > > spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRST, 0),
> > > +                                                SPI_MEM_OP_NO_DUMMY,
> > > +                                                SPI_MEM_OP_NO_ADDR,
> > > +                                                SPI_MEM_OP_NO_DATA);
> > > +                spi_nor_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);
> > > +                ret = spi_mem_exec_op(nor->spi, &op);
> > > +                if (ret) {
> > > +                                dev_warn(nor->dev, "Software reset 
> > > failed: %d\n", ret);
> > > +                                goto out;
> > > +                }
> > > +
> > > +                /*
> > > +                 * Software Reset is not instant, and the delay 
> varies 
> > > from flash to
> > > +                 * flash. Looking at a few flashes, most range 
> somewhere 
> > > below 100
> > > +                 * microseconds. So, wait for 200ms just to be sure.
> > > +                 */
> > > +                udelay(SPI_NOR_SRST_SLEEP_LEN);
> > > +
> > > +out:
> > > +                nor->cmd_ext_type = ext;
> > > +                return ret;
> > > +}
> > > 
> > > 
> > > Thanks
> > > Jaime
> > 
> > -- 
> > Regards,
> > Pratyush Yadav
> > Texas Instruments Inc.
> 
> Thanks
> Jaime
> 
> 
> CONFIDENTIALITY NOTE:
> 
> This e-mail and any attachments may contain confidential information 
> and/or personal data, which is protected by applicable laws. Please be 
> reminded that duplication, disclosure, distribution, or use of this e-mail 
> (and/or its attachments) or any part thereof is prohibited. If you receive 
> this e-mail in error, please notify us immediately and delete this mail as 
> well as its attachment(s) from your system. In addition, please be 
> informed that collection, processing, and/or use of personal data is 
> prohibited unless expressly permitted by personal data protection laws. 
> Thank you for your attention and cooperation.
> 
> Macronix International Co., Ltd.
> 
> =====================================================================
> 
> 
> 
> ============================================================================
> 
> CONFIDENTIALITY NOTE:
> 
> This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.
> 
> Macronix International Co., Ltd.
> 
> =====================================================================

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.