All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pratyush Yadav <p.yadav@ti.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
	Nikhil Devshatwar <nikhil.nd@ti.com>,
	Pratyush Yadav <p.yadav@ti.com>, Rob Herring <robh+dt@kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-media@vger.kernel.org>
Subject: [PATCH v3 10/11] media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver
Date: Fri, 25 Jun 2021 00:51:59 +0530	[thread overview]
Message-ID: <20210624192200.22559-11-p.yadav@ti.com> (raw)
In-Reply-To: <20210624192200.22559-1-p.yadav@ti.com>

TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
parts together.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>

---

(no changes since v2)

Changes in v2:
- Rename to ti,j721e-csi2rx.yaml
- Add an entry in MAINTAINERS.
- Add a description for the binding.
- Change compatible to ti,j721e-csi2rx to make it SoC specific.
- Remove description from dmas, reg, power-domains.
- Remove a limit of 2 from #address-cells and #size-cells.
- Fix add ^ to csi-bridge subnode regex.
- Make ranges mandatory.
- Add unit address in example.
- Add a reference to cdns,csi2rx in csi-bridge subnode.
- Expand the example to include the csi-bridge subnode as well.
- Re-order subject prefixes.

 .../bindings/media/ti,j721e-csi2rx.yaml       | 101 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml

diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
new file mode 100644
index 000000000000..db87cfd65bed
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E CSI2RX Wrapper Device Tree Bindings
+
+description: |
+  The TI J721E CSI2RX Wrapper is a wrapper around Cadence CSI2RX bridge that
+  enables sending captured frames to memory over PSI-L DMA. In the J721E
+  Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the
+  CSI_RX_IF section.
+
+maintainers:
+  - Pratyush Yadav <p.yadav@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,j721e-csi2rx
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx0
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+patternProperties:
+  "^csi-bridge@":
+    type: object
+    description: CSI2 bridge node.
+    $ref: cdns,csi2rx.yaml#
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+  - power-domains
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    ti_csi2rx0: ticsi2rx@4500000 {
+        compatible = "ti,j721e-csi2rx";
+        dmas = <&main_udmap 0x4940>;
+        dma-names = "rx0";
+        reg = <0x4500000 0x1000>;
+        power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        cdns_csi2rx: csi-bridge@4504000 {
+            compatible = "cdns,csi2rx";
+            reg = <0x4504000 0x1000>;
+            clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
+              <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
+            clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+              "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+            phys = <&dphy0>;
+            phy-names = "dphy";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                csi2_0: port@0 {
+
+                    reg = <0>;
+
+                    csi2rx0_in_sensor: endpoint {
+                        remote-endpoint = <&csi2_cam0>;
+                        bus-type = <4>; /* CSI2 DPHY. */
+                        clock-lanes = <0>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 96f002b9046d..e9b110115e5f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18471,6 +18471,7 @@ TI J721E CSI2RX DRIVER
 M:	Pratyush Yadav <p.yadav@ti.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
 F:	drivers/media/platform/ti/j721e-csi2rx/
 
 TI DAVINCI MACHINE SUPPORT
-- 
2.30.0


  parent reply	other threads:[~2021-06-24 19:23 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-24 19:21 [PATCH v3 00/11] CSI2RX support on J721E Pratyush Yadav
2021-06-24 19:21 ` [PATCH v3 01/11] media: ov5640: Use runtime PM to control sensor power Pratyush Yadav
2021-07-07 20:37   ` Sakari Ailus
2021-07-07 21:00     ` Laurent Pinchart
2021-07-07 21:44       ` Sakari Ailus
2021-07-07 21:51         ` Laurent Pinchart
2021-07-08 10:28           ` Sakari Ailus
2021-06-24 19:21 ` [PATCH v3 02/11] media: cadence: csi2rx: Unregister v4l2 async notifier Pratyush Yadav
2021-06-24 19:21 ` [PATCH v3 03/11] media: cadence: csi2rx: Add external DPHY support Pratyush Yadav
2021-06-24 19:21 ` [PATCH v3 04/11] media: cadence: csi2rx: Soft reset the streams before starting capture Pratyush Yadav
2021-06-24 19:21 ` [PATCH v3 05/11] media: cadence: csi2rx: Set the STOP bit when stopping a stream Pratyush Yadav
2021-06-24 19:21 ` [PATCH v3 06/11] media: cadence: csi2rx: Fix stream data configuration Pratyush Yadav
2021-06-24 19:21 ` [PATCH v3 07/11] media: cadence: csi2rx: Populate subdev devnode Pratyush Yadav
2021-06-24 19:21 ` [PATCH v3 08/11] media: Re-structure TI platform drivers Pratyush Yadav
2021-06-24 19:21 ` [PATCH v3 09/11] media: ti: Add CSI2RX support for J721E Pratyush Yadav
2021-06-24 19:21 ` Pratyush Yadav [this message]
2021-07-01 14:02   ` [PATCH v3 10/11] media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver Rob Herring
2021-06-24 19:22 ` [PATCH v3 11/11] media: dt-bindings: Convert Cadence CSI2RX binding to YAML Pratyush Yadav
2021-07-01 18:55   ` Rob Herring
2021-07-07 18:45     ` Pratyush Yadav
2021-07-01  7:56 ` [PATCH v3 00/11] CSI2RX support on J721E Tomi Valkeinen
2021-07-07 18:56   ` Pratyush Yadav
2021-07-08  8:19     ` Jacopo Mondi
2021-07-08  8:43       ` Tomi Valkeinen
2021-07-08 11:25         ` Pratyush Yadav
2021-09-09 18:11   ` Pratyush Yadav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210624192200.22559-11-p.yadav@ti.com \
    --to=p.yadav@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=nikhil.nd@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.