From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Sven Eckelmann Subject: [PATCH 9/9] batctl: man: Rewrite SEE ALSO list Date: Sat, 17 Jul 2021 13:01:29 +0200 Message-Id: <20210717110129.25539-10-sven@narfation.org> In-Reply-To: <20210717110129.25539-1-sven@narfation.org> References: <20210717110129.25539-1-sven@narfation.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: b.a.t.m.a.n@lists.open-mesh.org Cc: Sven Eckelmann The dot command is not relevant anymore to batctl because the vis command is no longer provided by batctl/batman-adv. The ip and ip-link are the main tools to handle the kernel net_devices via rtnetlink. They are therefore a must for anyone trying to use the batadv interfaces. The trace-cmd is the tool which has to be used to gather the logs from the kernel when batctl enabled the various loglevels for an batadv interface. The bridge utility is the main tool to configure bridges over the batman-adv interfaces. It must also be used to read out the mdb state in case the multicast handling of batman-adv has to be debugged. Signed-off-by: Sven Eckelmann --- man/batctl.8 | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/man/batctl.8 b/man/batctl.8 index 1470beb..b5be0b8 100644 --- a/man/batctl.8 +++ b/man/batctl.8 @@ -506,11 +506,14 @@ provided host name or replace MAC addresses in debug output and logs. Host names addresses. .SH SEE ALSO -.BR ping (1), -.BR traceroute (1), -.BR tcpdump (1), +.BR bridge (8), .BR dmesg (1), -.BR dot (1) +.BR ip (8), +.BR ip-link (8), +.BR ping (8), +.BR tcpdump (8), +.BR traceroute (1), +.BR trace-cmd (1) .SH AUTHOR batctl was written by Andreas Langer and Marek Lindner . .PP -- 2.30.2