From: Phillip Potter <phil@philpotter.co.uk>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, dan.carpenter@oracle.com,
linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev,
fabioaiuto83@gmail.com, martin@kaiser.cx
Subject: [PATCH v4 4/6] staging: r8188eu: introduce new include dir for RTL8188eu driver
Date: Wed, 28 Jul 2021 00:22:17 +0100 [thread overview]
Message-ID: <20210727232219.2948-5-phil@philpotter.co.uk> (raw)
In-Reply-To: <20210727232219.2948-1-phil@philpotter.co.uk>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 724116 bytes --]
This patchset is split in order to keep the file sizes down. This
include directory is part of the newer/better driver from GitHub
modified by Larry Finger. Import this as the basis for all future
work going forward.
Suggested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---
.../staging/r8188eu/include/Hal8188EPhyCfg.h | 269 +++
.../staging/r8188eu/include/Hal8188EPhyReg.h | 1088 +++++++++++++
.../staging/r8188eu/include/Hal8188EPwrSeq.h | 173 ++
.../r8188eu/include/Hal8188ERateAdaptive.h | 75 +
drivers/staging/r8188eu/include/Hal8188EReg.h | 44 +
.../r8188eu/include/HalHWImg8188E_BB.h | 44 +
.../r8188eu/include/HalHWImg8188E_FW.h | 33 +
.../r8188eu/include/HalHWImg8188E_MAC.h | 30 +
.../r8188eu/include/HalHWImg8188E_RF.h | 30 +
drivers/staging/r8188eu/include/HalPhyRf.h | 30 +
.../staging/r8188eu/include/HalPhyRf_8188e.h | 58 +
.../staging/r8188eu/include/HalPwrSeqCmd.h | 126 ++
drivers/staging/r8188eu/include/HalVerDef.h | 166 ++
drivers/staging/r8188eu/include/autoconf.h | 43 +
drivers/staging/r8188eu/include/basic_types.h | 184 +++
drivers/staging/r8188eu/include/cmd_osdep.h | 32 +
drivers/staging/r8188eu/include/drv_types.h | 346 ++++
.../staging/r8188eu/include/drv_types_linux.h | 23 +
drivers/staging/r8188eu/include/ethernet.h | 41 +
drivers/staging/r8188eu/include/h2clbk.h | 32 +
drivers/staging/r8188eu/include/hal_com.h | 172 ++
drivers/staging/r8188eu/include/hal_intf.h | 430 +++++
drivers/staging/r8188eu/include/ieee80211.h | 1261 +++++++++++++++
.../staging/r8188eu/include/ieee80211_ext.h | 287 ++++
drivers/staging/r8188eu/include/if_ether.h | 111 ++
.../staging/r8188eu/include/ioctl_cfg80211.h | 107 ++
drivers/staging/r8188eu/include/ip.h | 125 ++
drivers/staging/r8188eu/include/mlme_osdep.h | 35 +
.../staging/r8188eu/include/mp_custom_oid.h | 349 ++++
drivers/staging/r8188eu/include/nic_spec.h | 41 +
drivers/staging/r8188eu/include/odm.h | 1182 ++++++++++++++
.../staging/r8188eu/include/odm_HWConfig.h | 133 ++
.../staging/r8188eu/include/odm_RTL8188E.h | 56 +
.../r8188eu/include/odm_RegConfig8188E.h | 43 +
.../r8188eu/include/odm_RegDefine11AC.h | 46 +
.../r8188eu/include/odm_RegDefine11N.h | 160 ++
drivers/staging/r8188eu/include/odm_debug.h | 143 ++
.../staging/r8188eu/include/odm_interface.h | 164 ++
drivers/staging/r8188eu/include/odm_precomp.h | 103 ++
drivers/staging/r8188eu/include/odm_reg.h | 116 ++
drivers/staging/r8188eu/include/odm_types.h | 61 +
drivers/staging/r8188eu/include/osdep_intf.h | 83 +
.../staging/r8188eu/include/osdep_service.h | 489 ++++++
drivers/staging/r8188eu/include/recv_osdep.h | 54 +
.../staging/r8188eu/include/rtl8188e_cmd.h | 122 ++
drivers/staging/r8188eu/include/rtl8188e_dm.h | 62 +
.../staging/r8188eu/include/rtl8188e_hal.h | 471 ++++++
.../staging/r8188eu/include/rtl8188e_led.h | 34 +
.../staging/r8188eu/include/rtl8188e_recv.h | 69 +
drivers/staging/r8188eu/include/rtl8188e_rf.h | 35 +
.../staging/r8188eu/include/rtl8188e_spec.h | 1438 +++++++++++++++++
.../staging/r8188eu/include/rtl8188e_sreset.h | 31 +
.../staging/r8188eu/include/rtl8188e_xmit.h | 177 ++
drivers/staging/r8188eu/include/rtw_android.h | 64 +
drivers/staging/r8188eu/include/rtw_ap.h | 67 +
drivers/staging/r8188eu/include/rtw_br_ext.h | 66 +
drivers/staging/r8188eu/include/rtw_cmd.h | 991 ++++++++++++
drivers/staging/r8188eu/include/rtw_debug.h | 274 ++++
drivers/staging/r8188eu/include/rtw_eeprom.h | 130 ++
drivers/staging/r8188eu/include/rtw_efuse.h | 150 ++
drivers/staging/r8188eu/include/rtw_event.h | 113 ++
drivers/staging/r8188eu/include/rtw_ht.h | 44 +
drivers/staging/r8188eu/include/rtw_io.h | 387 +++++
drivers/staging/r8188eu/include/rtw_ioctl.h | 120 ++
.../staging/r8188eu/include/rtw_ioctl_rtl.h | 79 +
.../staging/r8188eu/include/rtw_ioctl_set.h | 49 +
drivers/staging/r8188eu/include/rtw_iol.h | 84 +
drivers/staging/r8188eu/include/rtw_led.h | 201 +++
drivers/staging/r8188eu/include/rtw_mlme.h | 649 ++++++++
.../staging/r8188eu/include/rtw_mlme_ext.h | 874 ++++++++++
drivers/staging/r8188eu/include/rtw_mp.h | 492 ++++++
.../staging/r8188eu/include/rtw_mp_ioctl.h | 339 ++++
.../r8188eu/include/rtw_mp_phy_regdef.h | 1079 +++++++++++++
drivers/staging/r8188eu/include/rtw_p2p.h | 135 ++
drivers/staging/r8188eu/include/rtw_pwrctrl.h | 282 ++++
drivers/staging/r8188eu/include/rtw_qos.h | 30 +
drivers/staging/r8188eu/include/rtw_recv.h | 473 ++++++
drivers/staging/r8188eu/include/rtw_rf.h | 145 ++
.../staging/r8188eu/include/rtw_security.h | 382 +++++
drivers/staging/r8188eu/include/rtw_sreset.h | 50 +
drivers/staging/r8188eu/include/rtw_version.h | 1 +
drivers/staging/r8188eu/include/rtw_xmit.h | 383 +++++
drivers/staging/r8188eu/include/sta_info.h | 384 +++++
drivers/staging/r8188eu/include/usb_hal.h | 26 +
drivers/staging/r8188eu/include/usb_ops.h | 115 ++
.../staging/r8188eu/include/usb_ops_linux.h | 55 +
drivers/staging/r8188eu/include/usb_osintf.h | 45 +
.../staging/r8188eu/include/usb_vendor_req.h | 51 +
drivers/staging/r8188eu/include/wifi.h | 1105 +++++++++++++
drivers/staging/r8188eu/include/wlan_bssdef.h | 343 ++++
drivers/staging/r8188eu/include/xmit_osdep.h | 67 +
91 files changed, 21381 insertions(+)
create mode 100644 drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
create mode 100644 drivers/staging/r8188eu/include/Hal8188EPhyReg.h
create mode 100644 drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
create mode 100644 drivers/staging/r8188eu/include/Hal8188ERateAdaptive.h
create mode 100644 drivers/staging/r8188eu/include/Hal8188EReg.h
create mode 100644 drivers/staging/r8188eu/include/HalHWImg8188E_BB.h
create mode 100644 drivers/staging/r8188eu/include/HalHWImg8188E_FW.h
create mode 100644 drivers/staging/r8188eu/include/HalHWImg8188E_MAC.h
create mode 100644 drivers/staging/r8188eu/include/HalHWImg8188E_RF.h
create mode 100644 drivers/staging/r8188eu/include/HalPhyRf.h
create mode 100644 drivers/staging/r8188eu/include/HalPhyRf_8188e.h
create mode 100644 drivers/staging/r8188eu/include/HalPwrSeqCmd.h
create mode 100644 drivers/staging/r8188eu/include/HalVerDef.h
create mode 100644 drivers/staging/r8188eu/include/autoconf.h
create mode 100644 drivers/staging/r8188eu/include/basic_types.h
create mode 100644 drivers/staging/r8188eu/include/cmd_osdep.h
create mode 100644 drivers/staging/r8188eu/include/drv_types.h
create mode 100644 drivers/staging/r8188eu/include/drv_types_linux.h
create mode 100644 drivers/staging/r8188eu/include/ethernet.h
create mode 100644 drivers/staging/r8188eu/include/h2clbk.h
create mode 100644 drivers/staging/r8188eu/include/hal_com.h
create mode 100644 drivers/staging/r8188eu/include/hal_intf.h
create mode 100644 drivers/staging/r8188eu/include/ieee80211.h
create mode 100644 drivers/staging/r8188eu/include/ieee80211_ext.h
create mode 100644 drivers/staging/r8188eu/include/if_ether.h
create mode 100644 drivers/staging/r8188eu/include/ioctl_cfg80211.h
create mode 100644 drivers/staging/r8188eu/include/ip.h
create mode 100644 drivers/staging/r8188eu/include/mlme_osdep.h
create mode 100644 drivers/staging/r8188eu/include/mp_custom_oid.h
create mode 100644 drivers/staging/r8188eu/include/nic_spec.h
create mode 100644 drivers/staging/r8188eu/include/odm.h
create mode 100644 drivers/staging/r8188eu/include/odm_HWConfig.h
create mode 100644 drivers/staging/r8188eu/include/odm_RTL8188E.h
create mode 100644 drivers/staging/r8188eu/include/odm_RegConfig8188E.h
create mode 100644 drivers/staging/r8188eu/include/odm_RegDefine11AC.h
create mode 100644 drivers/staging/r8188eu/include/odm_RegDefine11N.h
create mode 100644 drivers/staging/r8188eu/include/odm_debug.h
create mode 100644 drivers/staging/r8188eu/include/odm_interface.h
create mode 100644 drivers/staging/r8188eu/include/odm_precomp.h
create mode 100644 drivers/staging/r8188eu/include/odm_reg.h
create mode 100644 drivers/staging/r8188eu/include/odm_types.h
create mode 100644 drivers/staging/r8188eu/include/osdep_intf.h
create mode 100644 drivers/staging/r8188eu/include/osdep_service.h
create mode 100644 drivers/staging/r8188eu/include/recv_osdep.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_cmd.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_dm.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_hal.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_led.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_recv.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_rf.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_spec.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_sreset.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_xmit.h
create mode 100644 drivers/staging/r8188eu/include/rtw_android.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ap.h
create mode 100644 drivers/staging/r8188eu/include/rtw_br_ext.h
create mode 100644 drivers/staging/r8188eu/include/rtw_cmd.h
create mode 100644 drivers/staging/r8188eu/include/rtw_debug.h
create mode 100644 drivers/staging/r8188eu/include/rtw_eeprom.h
create mode 100644 drivers/staging/r8188eu/include/rtw_efuse.h
create mode 100644 drivers/staging/r8188eu/include/rtw_event.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ht.h
create mode 100644 drivers/staging/r8188eu/include/rtw_io.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ioctl.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ioctl_rtl.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ioctl_set.h
create mode 100644 drivers/staging/r8188eu/include/rtw_iol.h
create mode 100644 drivers/staging/r8188eu/include/rtw_led.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mlme.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mlme_ext.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mp.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mp_ioctl.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mp_phy_regdef.h
create mode 100644 drivers/staging/r8188eu/include/rtw_p2p.h
create mode 100644 drivers/staging/r8188eu/include/rtw_pwrctrl.h
create mode 100644 drivers/staging/r8188eu/include/rtw_qos.h
create mode 100644 drivers/staging/r8188eu/include/rtw_recv.h
create mode 100644 drivers/staging/r8188eu/include/rtw_rf.h
create mode 100644 drivers/staging/r8188eu/include/rtw_security.h
create mode 100644 drivers/staging/r8188eu/include/rtw_sreset.h
create mode 100644 drivers/staging/r8188eu/include/rtw_version.h
create mode 100644 drivers/staging/r8188eu/include/rtw_xmit.h
create mode 100644 drivers/staging/r8188eu/include/sta_info.h
create mode 100644 drivers/staging/r8188eu/include/usb_hal.h
create mode 100644 drivers/staging/r8188eu/include/usb_ops.h
create mode 100644 drivers/staging/r8188eu/include/usb_ops_linux.h
create mode 100644 drivers/staging/r8188eu/include/usb_osintf.h
create mode 100644 drivers/staging/r8188eu/include/usb_vendor_req.h
create mode 100644 drivers/staging/r8188eu/include/wifi.h
create mode 100644 drivers/staging/r8188eu/include/wlan_bssdef.h
create mode 100644 drivers/staging/r8188eu/include/xmit_osdep.h
diff --git a/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h b/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
new file mode 100644
index 000000000000..6fb059576a67
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
@@ -0,0 +1,269 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYCFG_H__
+#define __INC_HAL8188EPHYCFG_H__
+
+/*--------------------------Define Parameters-------------------------------*/
+#define LOOP_LIMIT 5
+#define MAX_STALL_TIME 50 /* us */
+#define AntennaDiversityValue 0x80
+#define MAX_TXPWR_IDX_NMODE_92S 63
+#define Reset_Cnt_Limit 3
+
+#define IQK_MAC_REG_NUM 4
+#define IQK_ADDA_REG_NUM 16
+#define IQK_BB_REG_NUM 9
+#define HP_THERMAL_NUM 8
+
+#define MAX_AGGR_NUM 0x07
+
+/*--------------------------Define Parameters-------------------------------*/
+
+/*------------------------------Define structure----------------------------*/
+enum sw_chnl_cmd_id {
+ CmdID_End,
+ CmdID_SetTxPowerLevel,
+ CmdID_BBRegWrite10,
+ CmdID_WritePortUlong,
+ CmdID_WritePortUshort,
+ CmdID_WritePortUchar,
+ CmdID_RF_WriteReg,
+};
+
+/* 1. Switch channel related */
+struct sw_chnl_cmd {
+ enum sw_chnl_cmd_id CmdID;
+ u32 Para1;
+ u32 Para2;
+ u32 msDelay;
+};
+
+enum hw90_block {
+ HW90_BLOCK_MAC = 0,
+ HW90_BLOCK_PHY0 = 1,
+ HW90_BLOCK_PHY1 = 2,
+ HW90_BLOCK_RF = 3,
+ HW90_BLOCK_MAXIMUM = 4, /* Never use this */
+};
+
+enum rf_radio_path {
+ RF_PATH_A = 0, /* Radio Path A */
+ RF_PATH_B = 1, /* Radio Path B */
+ RF_PATH_C = 2, /* Radio Path C */
+ RF_PATH_D = 3, /* Radio Path D */
+};
+
+#define MAX_PG_GROUP 13
+
+#define RF_PATH_MAX 3
+#define MAX_TX_COUNT 4 /* path numbers */
+
+#define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */
+#define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8,
+ *ch9~11, ch12~13, CH 14
+ * total three groups */
+#define CHANNEL_GROUP_MAX_88E 6
+
+enum wireless_mode {
+ WIRELESS_MODE_UNKNOWN = 0x00,
+ WIRELESS_MODE_A = BIT2,
+ WIRELESS_MODE_B = BIT0,
+ WIRELESS_MODE_G = BIT1,
+ WIRELESS_MODE_AUTO = BIT5,
+ WIRELESS_MODE_N_24G = BIT3,
+ WIRELESS_MODE_N_5G = BIT4,
+ WIRELESS_MODE_AC = BIT6
+};
+
+enum phy_rate_tx_offset_area {
+ RA_OFFSET_LEGACY_OFDM1,
+ RA_OFFSET_LEGACY_OFDM2,
+ RA_OFFSET_HT_OFDM1,
+ RA_OFFSET_HT_OFDM2,
+ RA_OFFSET_HT_OFDM3,
+ RA_OFFSET_HT_OFDM4,
+ RA_OFFSET_HT_CCK,
+};
+
+/* BB/RF related */
+enum RF_TYPE_8190P {
+ RF_TYPE_MIN, /* 0 */
+ RF_8225 = 1, /* 1 11b/g RF for verification only */
+ RF_8256 = 2, /* 2 11b/g/n */
+ RF_8258 = 3, /* 3 11a/b/g/n RF */
+ RF_6052 = 4, /* 4 11b/g/n RF */
+ /* TODO: We should remove this psudo PHY RF after we get new RF. */
+ RF_PSEUDO_11N = 5, /* 5, It is a temporality RF. */
+};
+
+struct bb_reg_def {
+ u32 rfintfs; /* set software control: */
+ /* 0x870~0x877[8 bytes] */
+ u32 rfintfi; /* readback data: */
+ /* 0x8e0~0x8e7[8 bytes] */
+ u32 rfintfo; /* output data: */
+ /* 0x860~0x86f [16 bytes] */
+ u32 rfintfe; /* output enable: */
+ /* 0x860~0x86f [16 bytes] */
+ u32 rf3wireOffset; /* LSSI data: */
+ /* 0x840~0x84f [16 bytes] */
+ u32 rfLSSI_Select; /* BB Band Select: */
+ /* 0x878~0x87f [8 bytes] */
+ u32 rfTxGainStage; /* Tx gain stage: */
+ /* 0x80c~0x80f [4 bytes] */
+ u32 rfHSSIPara1; /* wire parameter control1 : */
+ /* 0x820~0x823,0x828~0x82b,
+ * 0x830~0x833, 0x838~0x83b [16 bytes] */
+ u32 rfHSSIPara2; /* wire parameter control2 : */
+ /* 0x824~0x827,0x82c~0x82f, 0x834~0x837,
+ * 0x83c~0x83f [16 bytes] */
+ u32 rfSwitchControl; /* Tx Rx antenna control : */
+ /* 0x858~0x85f [16 bytes] */
+ u32 rfAGCControl1; /* AGC parameter control1 : */
+ /* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
+ * 0xc68~0xc6b [16 bytes] */
+ u32 rfAGCControl2; /* AGC parameter control2 : */
+ /* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
+ * 0xc6c~0xc6f [16 bytes] */
+ u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */
+ /* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
+ * 0xc2c~0xc2f [16 bytes] */
+ u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter,
+ * Rx DC notch filter : */
+ /* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
+ * 0xc28~0xc2b [16 bytes] */
+ u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */
+ /* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
+ * 0xc98~0xc9b [16 bytes] */
+ u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */
+ /* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
+ * 0xc9c~0xc9f [16 bytes] */
+ u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */
+ /* 0x8a0~0x8af [16 bytes] */
+ u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for
+ * Path A and B */
+};
+
+struct ant_sel_ofdm {
+ u32 r_tx_antenna:4;
+ u32 r_ant_l:4;
+ u32 r_ant_non_ht:4;
+ u32 r_ant_ht1:4;
+ u32 r_ant_ht2:4;
+ u32 r_ant_ht_s1:4;
+ u32 r_ant_non_ht_s1:4;
+ u32 OFDM_TXSC:2;
+ u32 reserved:2;
+};
+
+struct ant_sel_cck {
+ u8 r_cckrx_enable_2:2;
+ u8 r_cckrx_enable:2;
+ u8 r_ccktx_enable:4;
+};
+
+/*------------------------------Define structure----------------------------*/
+
+/*------------------------Export global variable----------------------------*/
+/*------------------------Export global variable----------------------------*/
+
+/*------------------------Export Marco Definition---------------------------*/
+/*------------------------Export Marco Definition---------------------------*/
+
+/*--------------------------Exported Function prototype---------------------*/
+/* */
+/* BB and RF register read/write */
+/* */
+u32 rtl8188e_PHY_QueryBBReg(struct adapter *adapter, u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr,
+ u32 mask, u32 data);
+u32 rtl8188e_PHY_QueryRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+ u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+ u32 regaddr, u32 mask, u32 data);
+
+/* Initialization related function */
+/* MAC/BB/RF HAL config */
+int PHY_MACConfig8188E(struct adapter *adapter);
+int PHY_BBConfig8188E(struct adapter *adapter);
+int PHY_RFConfig8188E(struct adapter *adapter);
+
+/* RF config */
+int rtl8188e_PHY_ConfigRFWithParaFile(struct adapter *adapter, u8 *filename,
+ enum rf_radio_path rfpath);
+int rtl8188e_PHY_ConfigRFWithHeaderFile(struct adapter *adapter,
+ enum rf_radio_path rfpath);
+
+/* Read initi reg value for tx power setting. */
+void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter);
+
+/* BB TX Power R/W */
+void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel);
+void PHY_SetTxPowerLevel8188E(struct adapter *adapter, u8 channel);
+bool PHY_UpdateTxPowerDbm8188E(struct adapter *adapter, int power);
+
+void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation);
+
+/* Switch bandwidth for 8192S */
+void PHY_SetBWMode8188E(struct adapter *adapter,
+ enum ht_channel_width chnlwidth, unsigned char offset);
+
+/* channel switch related funciton */
+void PHY_SwChnl8188E(struct adapter *adapter, u8 channel);
+/* Call after initialization */
+void ChkFwCmdIoDone(struct adapter *adapter);
+
+/* BB/MAC/RF other monitor API */
+void PHY_SetRFPathSwitch_8188E(struct adapter *adapter, bool main);
+
+void PHY_SwitchEphyParameter(struct adapter *adapter);
+
+void PHY_EnableHostClkReq(struct adapter *adapter);
+
+bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant);
+
+void storePwrIndexDiffRateOffset(struct adapter *adapter, u32 regaddr,
+ u32 mask, u32 data);
+/*--------------------------Exported Function prototype---------------------*/
+
+#define PHY_QueryBBReg(adapt, regaddr, mask) \
+ rtl8188e_PHY_QueryBBReg((adapt), (regaddr), (mask))
+#define PHY_SetBBReg(adapt, regaddr, bitmask, data) \
+ rtl8188e_PHY_SetBBReg((adapt), (regaddr), (bitmask), (data))
+#define PHY_QueryRFReg(adapt, rfpath, regaddr, bitmask) \
+ rtl8188e_PHY_QueryRFReg((adapt), (rfpath), (regaddr), (bitmask))
+#define PHY_SetRFReg(adapt, rfpath, regaddr, bitmask, data) \
+ rtl8188e_PHY_SetRFReg((adapt), (rfpath), (regaddr), (bitmask), (data))
+
+#define PHY_SetMacReg PHY_SetBBReg
+
+#define SIC_HW_SUPPORT 0
+
+#define SIC_MAX_POLL_CNT 5
+
+#define SIC_CMD_READY 0
+#define SIC_CMD_WRITE 1
+#define SIC_CMD_READ 2
+
+#define SIC_CMD_REG 0x1EB /* 1byte */
+#define SIC_ADDR_REG 0x1E8 /* 1b9~1ba, 2 bytes */
+#define SIC_DATA_REG 0x1EC /* 1bc~1bf */
+
+#endif /* __INC_HAL8192CPHYCFG_H */
diff --git a/drivers/staging/r8188eu/include/Hal8188EPhyReg.h b/drivers/staging/r8188eu/include/Hal8188EPhyReg.h
new file mode 100644
index 000000000000..c324970171cd
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188EPhyReg.h
@@ -0,0 +1,1088 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYREG_H__
+#define __INC_HAL8188EPHYREG_H__
+/*--------------------------Define Parameters-------------------------------*/
+/* */
+/* BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
+/* 3. RF register 0x00-2E */
+/* 4. Bit Mask for BB/RF register */
+/* 5. Other definition for BB/RF R/W */
+/* */
+
+/* */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 1. Page1(0x100) */
+/* */
+#define rPMAC_Reset 0x100
+#define rPMAC_TxStart 0x104
+#define rPMAC_TxLegacySIG 0x108
+#define rPMAC_TxHTSIG1 0x10c
+#define rPMAC_TxHTSIG2 0x110
+#define rPMAC_PHYDebug 0x114
+#define rPMAC_TxPacketNum 0x118
+#define rPMAC_TxIdle 0x11c
+#define rPMAC_TxMACHeader0 0x120
+#define rPMAC_TxMACHeader1 0x124
+#define rPMAC_TxMACHeader2 0x128
+#define rPMAC_TxMACHeader3 0x12c
+#define rPMAC_TxMACHeader4 0x130
+#define rPMAC_TxMACHeader5 0x134
+#define rPMAC_TxDataType 0x138
+#define rPMAC_TxRandomSeed 0x13c
+#define rPMAC_CCKPLCPPreamble 0x140
+#define rPMAC_CCKPLCPHeader 0x144
+#define rPMAC_CCKCRC16 0x148
+#define rPMAC_OFDMRxCRC32OK 0x170
+#define rPMAC_OFDMRxCRC32Er 0x174
+#define rPMAC_OFDMRxParityEr 0x178
+#define rPMAC_OFDMRxCRC8Er 0x17c
+#define rPMAC_CCKCRxRC16Er 0x180
+#define rPMAC_CCKCRxRC32Er 0x184
+#define rPMAC_CCKCRxRC32OK 0x188
+#define rPMAC_TxStatus 0x18c
+
+/* 2. Page2(0x200) */
+/* The following two definition are only used for USB interface. */
+#define RF_BB_CMD_ADDR 0x02c0 /* RF/BB r/w cmd address. */
+#define RF_BB_CMD_DATA 0x02c4 /* RF/BB r/w cmd data. */
+
+/* 3. Page8(0x800) */
+#define rFPGA0_RFMOD 0x800 /* RF mode & CCK TxSC RF BW Setting */
+
+#define rFPGA0_TxInfo 0x804 /* Status report?? */
+#define rFPGA0_PSDFunction 0x808
+
+#define rFPGA0_TxGainStage 0x80c /* Set TX PWR init gain? */
+
+#define rFPGA0_RFTiming1 0x810 /* Useless now */
+#define rFPGA0_RFTiming2 0x814
+
+#define rFPGA0_XA_HSSIParameter1 0x820 /* RF 3 wire register */
+#define rFPGA0_XA_HSSIParameter2 0x824
+#define rFPGA0_XB_HSSIParameter1 0x828
+#define rFPGA0_XB_HSSIParameter2 0x82c
+
+#define rFPGA0_XA_LSSIParameter 0x840
+#define rFPGA0_XB_LSSIParameter 0x844
+
+#define rFPGA0_RFWakeUpParameter 0x850 /* Useless now */
+#define rFPGA0_RFSleepUpParameter 0x854
+
+#define rFPGA0_XAB_SwitchControl 0x858 /* RF Channel switch */
+#define rFPGA0_XCD_SwitchControl 0x85c
+
+#define rFPGA0_XA_RFInterfaceOE 0x860 /* RF Channel switch */
+#define rFPGA0_XB_RFInterfaceOE 0x864
+
+#define rFPGA0_XAB_RFInterfaceSW 0x870 /* RF Iface Software Control */
+#define rFPGA0_XCD_RFInterfaceSW 0x874
+
+#define rFPGA0_XAB_RFParameter 0x878 /* RF Parameter */
+#define rFPGA0_XCD_RFParameter 0x87c
+
+/* Crystal cap setting RF-R/W protection for parameter4?? */
+#define rFPGA0_AnalogParameter1 0x880
+#define rFPGA0_AnalogParameter2 0x884
+#define rFPGA0_AnalogParameter3 0x888
+/* enable ad/da clock1 for dual-phy */
+#define rFPGA0_AdDaClockEn 0x888
+#define rFPGA0_AnalogParameter4 0x88c
+
+#define rFPGA0_XA_LSSIReadBack 0x8a0 /* Tranceiver LSSI Readback */
+#define rFPGA0_XB_LSSIReadBack 0x8a4
+#define rFPGA0_XC_LSSIReadBack 0x8a8
+#define rFPGA0_XD_LSSIReadBack 0x8ac
+
+#define rFPGA0_PSDReport 0x8b4 /* Useless now */
+/* Transceiver A HSPI Readback */
+#define TransceiverA_HSPI_Readback 0x8b8
+/* Transceiver B HSPI Readback */
+#define TransceiverB_HSPI_Readback 0x8bc
+/* Useless now RF Interface Readback Value */
+#define rFPGA0_XAB_RFInterfaceRB 0x8e0
+#define rFPGA0_XCD_RFInterfaceRB 0x8e4 /* Useless now */
+
+/* 4. Page9(0x900) */
+/* RF mode & OFDM TxSC RF BW Setting?? */
+#define rFPGA1_RFMOD 0x900
+
+#define rFPGA1_TxBlock 0x904 /* Useless now */
+#define rFPGA1_DebugSelect 0x908 /* Useless now */
+#define rFPGA1_TxInfo 0x90c /* Useless now Status report */
+
+/* 5. PageA(0xA00) */
+/* Set Control channel to upper or lower - required only for 40MHz */
+#define rCCK0_System 0xa00
+
+/* Disable init gain now Select RX path by RSSI */
+#define rCCK0_AFESetting 0xa04
+/* Disable init gain now Init gain */
+#define rCCK0_CCA 0xa08
+
+/* AGC default value, saturation level Antenna Diversity, RX AGC, LNA Threshold,
+ * RX LNA Threshold useless now. Not the same as 90 series */
+#define rCCK0_RxAGC1 0xa0c
+#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */
+
+#define rCCK0_RxHP 0xa14
+
+/* Timing recovery & Channel estimation threshold */
+#define rCCK0_DSPParameter1 0xa18
+#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */
+
+#define rCCK0_TxFilter1 0xa20
+#define rCCK0_TxFilter2 0xa24
+#define rCCK0_DebugPort 0xa28 /* debug port and Tx filter3 */
+#define rCCK0_FalseAlarmReport 0xa2c /* 0xa2d useless now */
+#define rCCK0_TRSSIReport 0xa50
+#define rCCK0_RxReport 0xa54 /* 0xa57 */
+#define rCCK0_FACounterLower 0xa5c /* 0xa5b */
+#define rCCK0_FACounterUpper 0xa58 /* 0xa5c */
+
+/* */
+/* PageB(0xB00) */
+/* */
+#define rPdp_AntA 0xb00
+#define rPdp_AntA_4 0xb04
+#define rConfig_Pmpd_AntA 0xb28
+#define rConfig_AntA 0xb68
+#define rConfig_AntB 0xb6c
+#define rPdp_AntB 0xb70
+#define rPdp_AntB_4 0xb74
+#define rConfig_Pmpd_AntB 0xb98
+#define rAPK 0xbd8
+
+/* */
+/* 6. PageC(0xC00) */
+/* */
+#define rOFDM0_LSTF 0xc00
+
+#define rOFDM0_TRxPathEnable 0xc04
+#define rOFDM0_TRMuxPar 0xc08
+#define rOFDM0_TRSWIsolation 0xc0c
+
+/* RxIQ DC offset, Rx digital filter, DC notch filter */
+#define rOFDM0_XARxAFE 0xc10
+#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */
+#define rOFDM0_XBRxAFE 0xc18
+#define rOFDM0_XBRxIQImbalance 0xc1c
+#define rOFDM0_XCRxAFE 0xc20
+#define rOFDM0_XCRxIQImbalance 0xc24
+#define rOFDM0_XDRxAFE 0xc28
+#define rOFDM0_XDRxIQImbalance 0xc2c
+
+#define rOFDM0_RxDetector1 0xc30 /*PD,BW & SBD DM tune init gain*/
+#define rOFDM0_RxDetector2 0xc34 /* SBD & Fame Sync. */
+#define rOFDM0_RxDetector3 0xc38 /* Frame Sync. */
+#define rOFDM0_RxDetector4 0xc3c /* PD, SBD, Frame Sync & Short-GI */
+
+#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */
+#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */
+#define rOFDM0_CCADropThreshold 0xc48 /* CCA Drop threshold */
+#define rOFDM0_ECCAThreshold 0xc4c /* energy CCA */
+
+#define rOFDM0_XAAGCCore1 0xc50 /* DIG */
+#define rOFDM0_XAAGCCore2 0xc54
+#define rOFDM0_XBAGCCore1 0xc58
+#define rOFDM0_XBAGCCore2 0xc5c
+#define rOFDM0_XCAGCCore1 0xc60
+#define rOFDM0_XCAGCCore2 0xc64
+#define rOFDM0_XDAGCCore1 0xc68
+#define rOFDM0_XDAGCCore2 0xc6c
+
+#define rOFDM0_AGCParameter1 0xc70
+#define rOFDM0_AGCParameter2 0xc74
+#define rOFDM0_AGCRSSITable 0xc78
+#define rOFDM0_HTSTFAGC 0xc7c
+
+#define rOFDM0_XATxIQImbalance 0xc80 /* TX PWR TRACK and DIG */
+#define rOFDM0_XATxAFE 0xc84
+#define rOFDM0_XBTxIQImbalance 0xc88
+#define rOFDM0_XBTxAFE 0xc8c
+#define rOFDM0_XCTxIQImbalance 0xc90
+#define rOFDM0_XCTxAFE 0xc94
+#define rOFDM0_XDTxIQImbalance 0xc98
+#define rOFDM0_XDTxAFE 0xc9c
+
+#define rOFDM0_RxIQExtAnta 0xca0
+#define rOFDM0_TxCoeff1 0xca4
+#define rOFDM0_TxCoeff2 0xca8
+#define rOFDM0_TxCoeff3 0xcac
+#define rOFDM0_TxCoeff4 0xcb0
+#define rOFDM0_TxCoeff5 0xcb4
+#define rOFDM0_TxCoeff6 0xcb8
+#define rOFDM0_RxHPParameter 0xce0
+#define rOFDM0_TxPseudoNoiseWgt 0xce4
+#define rOFDM0_FrameSync 0xcf0
+#define rOFDM0_DFSReport 0xcf4
+
+/* */
+/* 7. PageD(0xD00) */
+/* */
+#define rOFDM1_LSTF 0xd00
+#define rOFDM1_TRxPathEnable 0xd04
+
+#define rOFDM1_CFO 0xd08 /* No setting now */
+#define rOFDM1_CSI1 0xd10
+#define rOFDM1_SBD 0xd14
+#define rOFDM1_CSI2 0xd18
+#define rOFDM1_CFOTracking 0xd2c
+#define rOFDM1_TRxMesaure1 0xd34
+#define rOFDM1_IntfDet 0xd3c
+#define rOFDM1_PseudoNoiseStateAB 0xd50
+#define rOFDM1_PseudoNoiseStateCD 0xd54
+#define rOFDM1_RxPseudoNoiseWgt 0xd58
+
+#define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */
+#define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */
+#define rOFDM_PHYCounter3 0xda8 /* MCS not support */
+
+#define rOFDM_ShortCFOAB 0xdac /* No setting now */
+#define rOFDM_ShortCFOCD 0xdb0
+#define rOFDM_LongCFOAB 0xdb4
+#define rOFDM_LongCFOCD 0xdb8
+#define rOFDM_TailCFOAB 0xdbc
+#define rOFDM_TailCFOCD 0xdc0
+#define rOFDM_PWMeasure1 0xdc4
+#define rOFDM_PWMeasure2 0xdc8
+#define rOFDM_BWReport 0xdcc
+#define rOFDM_AGCReport 0xdd0
+#define rOFDM_RxSNR 0xdd4
+#define rOFDM_RxEVMCSI 0xdd8
+#define rOFDM_SIGReport 0xddc
+
+/* */
+/* 8. PageE(0xE00) */
+/* */
+#define rTxAGC_A_Rate18_06 0xe00
+#define rTxAGC_A_Rate54_24 0xe04
+#define rTxAGC_A_CCK1_Mcs32 0xe08
+#define rTxAGC_A_Mcs03_Mcs00 0xe10
+#define rTxAGC_A_Mcs07_Mcs04 0xe14
+#define rTxAGC_A_Mcs11_Mcs08 0xe18
+#define rTxAGC_A_Mcs15_Mcs12 0xe1c
+
+#define rTxAGC_B_Rate18_06 0x830
+#define rTxAGC_B_Rate54_24 0x834
+#define rTxAGC_B_CCK1_55_Mcs32 0x838
+#define rTxAGC_B_Mcs03_Mcs00 0x83c
+#define rTxAGC_B_Mcs07_Mcs04 0x848
+#define rTxAGC_B_Mcs11_Mcs08 0x84c
+#define rTxAGC_B_Mcs15_Mcs12 0x868
+#define rTxAGC_B_CCK11_A_CCK2_11 0x86c
+
+#define rFPGA0_IQK 0xe28
+#define rTx_IQK_Tone_A 0xe30
+#define rRx_IQK_Tone_A 0xe34
+#define rTx_IQK_PI_A 0xe38
+#define rRx_IQK_PI_A 0xe3c
+
+#define rTx_IQK 0xe40
+#define rRx_IQK 0xe44
+#define rIQK_AGC_Pts 0xe48
+#define rIQK_AGC_Rsp 0xe4c
+#define rTx_IQK_Tone_B 0xe50
+#define rRx_IQK_Tone_B 0xe54
+#define rTx_IQK_PI_B 0xe58
+#define rRx_IQK_PI_B 0xe5c
+#define rIQK_AGC_Cont 0xe60
+
+#define rBlue_Tooth 0xe6c
+#define rRx_Wait_CCA 0xe70
+#define rTx_CCK_RFON 0xe74
+#define rTx_CCK_BBON 0xe78
+#define rTx_OFDM_RFON 0xe7c
+#define rTx_OFDM_BBON 0xe80
+#define rTx_To_Rx 0xe84
+#define rTx_To_Tx 0xe88
+#define rRx_CCK 0xe8c
+
+#define rTx_Power_Before_IQK_A 0xe94
+#define rTx_Power_After_IQK_A 0xe9c
+
+#define rRx_Power_Before_IQK_A 0xea0
+#define rRx_Power_Before_IQK_A_2 0xea4
+#define rRx_Power_After_IQK_A 0xea8
+#define rRx_Power_After_IQK_A_2 0xeac
+
+#define rTx_Power_Before_IQK_B 0xeb4
+#define rTx_Power_After_IQK_B 0xebc
+
+#define rRx_Power_Before_IQK_B 0xec0
+#define rRx_Power_Before_IQK_B_2 0xec4
+#define rRx_Power_After_IQK_B 0xec8
+#define rRx_Power_After_IQK_B_2 0xecc
+
+#define rRx_OFDM 0xed0
+#define rRx_Wait_RIFS 0xed4
+#define rRx_TO_Rx 0xed8
+#define rStandby 0xedc
+#define rSleep 0xee0
+#define rPMPD_ANAEN 0xeec
+
+/* */
+/* 7. RF Register 0x00-0x2E (RF 8256) */
+/* RF-0222D 0x00-3F */
+/* */
+/* Zebra1 */
+#define rZebra1_HSSIEnable 0x0 /* Useless now */
+#define rZebra1_TRxEnable1 0x1
+#define rZebra1_TRxEnable2 0x2
+#define rZebra1_AGC 0x4
+#define rZebra1_ChargePump 0x5
+#define rZebra1_Channel 0x7 /* RF channel switch */
+
+/* endif */
+#define rZebra1_TxGain 0x8 /* Useless now */
+#define rZebra1_TxLPF 0x9
+#define rZebra1_RxLPF 0xb
+#define rZebra1_RxHPFCorner 0xc
+
+/* Zebra4 */
+#define rGlobalCtrl 0 /* Useless now */
+#define rRTL8256_TxLPF 19
+#define rRTL8256_RxLPF 11
+
+/* RTL8258 */
+#define rRTL8258_TxLPF 0x11 /* Useless now */
+#define rRTL8258_RxLPF 0x13
+#define rRTL8258_RSSILPF 0xa
+
+/* */
+/* RL6052 Register definition */
+/* */
+#define RF_AC 0x00 /* */
+
+#define RF_IQADJ_G1 0x01 /* */
+#define RF_IQADJ_G2 0x02 /* */
+
+#define RF_POW_TRSW 0x05 /* */
+
+#define RF_GAIN_RX 0x06 /* */
+#define RF_GAIN_TX 0x07 /* */
+
+#define RF_TXM_IDAC 0x08 /* */
+#define RF_IPA_G 0x09 /* */
+#define RF_TXBIAS_G 0x0A
+#define RF_TXPA_AG 0x0B
+#define RF_IPA_A 0x0C /* */
+#define RF_TXBIAS_A 0x0D
+#define RF_BS_PA_APSET_G9_G11 0x0E
+#define RF_BS_IQGEN 0x0F /* */
+
+#define RF_MODE1 0x10 /* */
+#define RF_MODE2 0x11 /* */
+
+#define RF_RX_AGC_HP 0x12 /* */
+#define RF_TX_AGC 0x13 /* */
+#define RF_BIAS 0x14 /* */
+#define RF_IPA 0x15 /* */
+#define RF_TXBIAS 0x16
+#define RF_POW_ABILITY 0x17 /* */
+#define RF_CHNLBW 0x18 /* RF channel and BW switch */
+#define RF_TOP 0x19 /* */
+
+#define RF_RX_G1 0x1A /* */
+#define RF_RX_G2 0x1B /* */
+
+#define RF_RX_BB2 0x1C /* */
+#define RF_RX_BB1 0x1D /* */
+
+#define RF_RCK1 0x1E /* */
+#define RF_RCK2 0x1F /* */
+
+#define RF_TX_G1 0x20 /* */
+#define RF_TX_G2 0x21 /* */
+#define RF_TX_G3 0x22 /* */
+
+#define RF_TX_BB1 0x23 /* */
+
+#define RF_T_METER_92D 0x42 /* */
+#define RF_T_METER_88E 0x42 /* */
+#define RF_T_METER 0x24 /* */
+
+#define RF_SYN_G1 0x25 /* RF TX Power control */
+#define RF_SYN_G2 0x26 /* RF TX Power control */
+#define RF_SYN_G3 0x27 /* RF TX Power control */
+#define RF_SYN_G4 0x28 /* RF TX Power control */
+#define RF_SYN_G5 0x29 /* RF TX Power control */
+#define RF_SYN_G6 0x2A /* RF TX Power control */
+#define RF_SYN_G7 0x2B /* RF TX Power control */
+#define RF_SYN_G8 0x2C /* RF TX Power control */
+
+#define RF_RCK_OS 0x30 /* RF TX PA control */
+#define RF_TXPA_G1 0x31 /* RF TX PA control */
+#define RF_TXPA_G2 0x32 /* RF TX PA control */
+#define RF_TXPA_G3 0x33 /* RF TX PA control */
+#define RF_TX_BIAS_A 0x35
+#define RF_TX_BIAS_D 0x36
+#define RF_LOBF_9 0x38
+#define RF_RXRF_A3 0x3C /* */
+#define RF_TRSW 0x3F
+
+#define RF_TXRF_A2 0x41
+#define RF_TXPA_G4 0x46
+#define RF_TXPA_A4 0x4B
+#define RF_0x52 0x52
+#define RF_WE_LUT 0xEF
+
+/* */
+/* Bit Mask */
+/* */
+/* 1. Page1(0x100) */
+#define bBBResetB 0x100 /* Useless now? */
+#define bGlobalResetB 0x200
+#define bOFDMTxStart 0x4
+#define bCCKTxStart 0x8
+#define bCRC32Debug 0x100
+#define bPMACLoopback 0x10
+#define bTxLSIG 0xffffff
+#define bOFDMTxRate 0xf
+#define bOFDMTxReserved 0x10
+#define bOFDMTxLength 0x1ffe0
+#define bOFDMTxParity 0x20000
+#define bTxHTSIG1 0xffffff
+#define bTxHTMCSRate 0x7f
+#define bTxHTBW 0x80
+#define bTxHTLength 0xffff00
+#define bTxHTSIG2 0xffffff
+#define bTxHTSmoothing 0x1
+#define bTxHTSounding 0x2
+#define bTxHTReserved 0x4
+#define bTxHTAggreation 0x8
+#define bTxHTSTBC 0x30
+#define bTxHTAdvanceCoding 0x40
+#define bTxHTShortGI 0x80
+#define bTxHTNumberHT_LTF 0x300
+#define bTxHTCRC8 0x3fc00
+#define bCounterReset 0x10000
+#define bNumOfOFDMTx 0xffff
+#define bNumOfCCKTx 0xffff0000
+#define bTxIdleInterval 0xffff
+#define bOFDMService 0xffff0000
+#define bTxMACHeader 0xffffffff
+#define bTxDataInit 0xff
+#define bTxHTMode 0x100
+#define bTxDataType 0x30000
+#define bTxRandomSeed 0xffffffff
+#define bCCKTxPreamble 0x1
+#define bCCKTxSFD 0xffff0000
+#define bCCKTxSIG 0xff
+#define bCCKTxService 0xff00
+#define bCCKLengthExt 0x8000
+#define bCCKTxLength 0xffff0000
+#define bCCKTxCRC16 0xffff
+#define bCCKTxStatus 0x1
+#define bOFDMTxStatus 0x2
+
+#define IS_BB_REG_OFFSET_92S(_Offset) \
+ ((_Offset >= 0x800) && (_Offset <= 0xfff))
+
+/* 2. Page8(0x800) */
+#define bRFMOD 0x1 /* Reg 0x800 rFPGA0_RFMOD */
+#define bJapanMode 0x2
+#define bCCKTxSC 0x30
+#define bCCKEn 0x1000000
+#define bOFDMEn 0x2000000
+
+#define bOFDMRxADCPhase 0x10000 /* Useless now */
+#define bOFDMTxDACPhase 0x40000
+#define bXATxAGC 0x3f
+
+#define bAntennaSelect 0x0300
+
+#define bXBTxAGC 0xf00 /* Reg 80c rFPGA0_TxGainStage */
+#define bXCTxAGC 0xf000
+#define bXDTxAGC 0xf0000
+
+#define bPAStart 0xf0000000 /* Useless now */
+#define bTRStart 0x00f00000
+#define bRFStart 0x0000f000
+#define bBBStart 0x000000f0
+#define bBBCCKStart 0x0000000f
+#define bPAEnd 0xf /* Reg0x814 */
+#define bTREnd 0x0f000000
+#define bRFEnd 0x000f0000
+#define bCCAMask 0x000000f0 /* T2R */
+#define bR2RCCAMask 0x00000f00
+#define bHSSI_R2TDelay 0xf8000000
+#define bHSSI_T2RDelay 0xf80000
+#define bContTxHSSI 0x400 /* change gain at continue Tx */
+#define bIGFromCCK 0x200
+#define bAGCAddress 0x3f
+#define bRxHPTx 0x7000
+#define bRxHPT2R 0x38000
+#define bRxHPCCKIni 0xc0000
+#define bAGCTxCode 0xc00000
+#define bAGCRxCode 0x300000
+
+/* Reg 0x820~84f rFPGA0_XA_HSSIParameter1 */
+#define b3WireDataLength 0x800
+#define b3WireAddressLength 0x400
+
+#define b3WireRFPowerDown 0x1 /* Useless now */
+#define b5GPAPEPolarity 0x40000000
+#define b2GPAPEPolarity 0x80000000
+#define bRFSW_TxDefaultAnt 0x3
+#define bRFSW_TxOptionAnt 0x30
+#define bRFSW_RxDefaultAnt 0x300
+#define bRFSW_RxOptionAnt 0x3000
+#define bRFSI_3WireData 0x1
+#define bRFSI_3WireClock 0x2
+#define bRFSI_3WireLoad 0x4
+#define bRFSI_3WireRW 0x8
+#define bRFSI_3Wire 0xf
+
+#define bRFSI_RFENV 0x10 /* Reg 0x870 rFPGA0_XAB_RFInterfaceSW */
+
+#define bRFSI_TRSW 0x20 /* Useless now */
+#define bRFSI_TRSWB 0x40
+#define bRFSI_ANTSW 0x100
+#define bRFSI_ANTSWB 0x200
+#define bRFSI_PAPE 0x400
+#define bRFSI_PAPE5G 0x800
+#define bBandSelect 0x1
+#define bHTSIG2_GI 0x80
+#define bHTSIG2_Smoothing 0x01
+#define bHTSIG2_Sounding 0x02
+#define bHTSIG2_Aggreaton 0x08
+#define bHTSIG2_STBC 0x30
+#define bHTSIG2_AdvCoding 0x40
+#define bHTSIG2_NumOfHTLTF 0x300
+#define bHTSIG2_CRC8 0x3fc
+#define bHTSIG1_MCS 0x7f
+#define bHTSIG1_BandWidth 0x80
+#define bHTSIG1_HTLength 0xffff
+#define bLSIG_Rate 0xf
+#define bLSIG_Reserved 0x10
+#define bLSIG_Length 0x1fffe
+#define bLSIG_Parity 0x20
+#define bCCKRxPhase 0x4
+
+#define bLSSIReadAddress 0x7f800000 /* T65 RF */
+
+#define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */
+
+#define bLSSIReadBackData 0xfffff /* T65 RF */
+
+#define bLSSIReadOKFlag 0x1000 /* Useless now */
+#define bCCKSampleRate 0x8 /* 0: 44MHz, 1:88MHz */
+#define bRegulator0Standby 0x1
+#define bRegulatorPLLStandby 0x2
+#define bRegulator1Standby 0x4
+#define bPLLPowerUp 0x8
+#define bDPLLPowerUp 0x10
+#define bDA10PowerUp 0x20
+#define bAD7PowerUp 0x200
+#define bDA6PowerUp 0x2000
+#define bXtalPowerUp 0x4000
+#define b40MDClkPowerUP 0x8000
+#define bDA6DebugMode 0x20000
+#define bDA6Swing 0x380000
+
+/* Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */
+#define bADClkPhase 0x4000000
+
+#define b80MClkDelay 0x18000000 /* Useless */
+#define bAFEWatchDogEnable 0x20000000
+
+/* Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap */
+#define bXtalCap01 0xc0000000
+#define bXtalCap23 0x3
+#define bXtalCap92x 0x0f000000
+#define bXtalCap 0x0f000000
+
+#define bIntDifClkEnable 0x400 /* Useless */
+#define bExtSigClkEnable 0x800
+#define bBandgapMbiasPowerUp 0x10000
+#define bAD11SHGain 0xc0000
+#define bAD11InputRange 0x700000
+#define bAD11OPCurrent 0x3800000
+#define bIPathLoopback 0x4000000
+#define bQPathLoopback 0x8000000
+#define bAFELoopback 0x10000000
+#define bDA10Swing 0x7e0
+#define bDA10Reverse 0x800
+#define bDAClkSource 0x1000
+#define bAD7InputRange 0x6000
+#define bAD7Gain 0x38000
+#define bAD7OutputCMMode 0x40000
+#define bAD7InputCMMode 0x380000
+#define bAD7Current 0xc00000
+#define bRegulatorAdjust 0x7000000
+#define bAD11PowerUpAtTx 0x1
+#define bDA10PSAtTx 0x10
+#define bAD11PowerUpAtRx 0x100
+#define bDA10PSAtRx 0x1000
+#define bCCKRxAGCFormat 0x200
+#define bPSDFFTSamplepPoint 0xc000
+#define bPSDAverageNum 0x3000
+#define bIQPathControl 0xc00
+#define bPSDFreq 0x3ff
+#define bPSDAntennaPath 0x30
+#define bPSDIQSwitch 0x40
+#define bPSDRxTrigger 0x400000
+#define bPSDTxTrigger 0x80000000
+#define bPSDSineToneScale 0x7f000000
+#define bPSDReport 0xffff
+
+/* 3. Page9(0x900) */
+#define bOFDMTxSC 0x30000000 /* Useless */
+#define bCCKTxOn 0x1
+#define bOFDMTxOn 0x2
+#define bDebugPage 0xfff /* reset debug page and HWord, LWord */
+#define bDebugItem 0xff /* reset debug page and LWord */
+#define bAntL 0x10
+#define bAntNonHT 0x100
+#define bAntHT1 0x1000
+#define bAntHT2 0x10000
+#define bAntHT1S1 0x100000
+#define bAntNonHTS1 0x1000000
+
+/* 4. PageA(0xA00) */
+#define bCCKBBMode 0x3 /* Useless */
+#define bCCKTxPowerSaving 0x80
+#define bCCKRxPowerSaving 0x40
+
+#define bCCKSideBand 0x10 /* Reg 0xa00 rCCK0_System 20/40 */
+
+#define bCCKScramble 0x8 /* Useless */
+#define bCCKAntDiversity 0x8000
+#define bCCKCarrierRecovery 0x4000
+#define bCCKTxRate 0x3000
+#define bCCKDCCancel 0x0800
+#define bCCKISICancel 0x0400
+#define bCCKMatchFilter 0x0200
+#define bCCKEqualizer 0x0100
+#define bCCKPreambleDetect 0x800000
+#define bCCKFastFalseCCA 0x400000
+#define bCCKChEstStart 0x300000
+#define bCCKCCACount 0x080000
+#define bCCKcs_lim 0x070000
+#define bCCKBistMode 0x80000000
+#define bCCKCCAMask 0x40000000
+#define bCCKTxDACPhase 0x4
+#define bCCKRxADCPhase 0x20000000 /* r_rx_clk */
+#define bCCKr_cp_mode0 0x0100
+#define bCCKTxDCOffset 0xf0
+#define bCCKRxDCOffset 0xf
+#define bCCKCCAMode 0xc000
+#define bCCKFalseCS_lim 0x3f00
+#define bCCKCS_ratio 0xc00000
+#define bCCKCorgBit_sel 0x300000
+#define bCCKPD_lim 0x0f0000
+#define bCCKNewCCA 0x80000000
+#define bCCKRxHPofIG 0x8000
+#define bCCKRxIG 0x7f00
+#define bCCKLNAPolarity 0x800000
+#define bCCKRx1stGain 0x7f0000
+#define bCCKRFExtend 0x20000000 /* CCK Rx Iinital gain polarity */
+#define bCCKRxAGCSatLevel 0x1f000000
+#define bCCKRxAGCSatCount 0xe0
+#define bCCKRxRFSettle 0x1f /* AGCsamp_dly */
+#define bCCKFixedRxAGC 0x8000
+#define bCCKAntennaPolarity 0x2000
+#define bCCKTxFilterType 0x0c00
+#define bCCKRxAGCReportType 0x0300
+#define bCCKRxDAGCEn 0x80000000
+#define bCCKRxDAGCPeriod 0x20000000
+#define bCCKRxDAGCSatLevel 0x1f000000
+#define bCCKTimingRecovery 0x800000
+#define bCCKTxC0 0x3f0000
+#define bCCKTxC1 0x3f000000
+#define bCCKTxC2 0x3f
+#define bCCKTxC3 0x3f00
+#define bCCKTxC4 0x3f0000
+#define bCCKTxC5 0x3f000000
+#define bCCKTxC6 0x3f
+#define bCCKTxC7 0x3f00
+#define bCCKDebugPort 0xff0000
+#define bCCKDACDebug 0x0f000000
+#define bCCKFalseAlarmEnable 0x8000
+#define bCCKFalseAlarmRead 0x4000
+#define bCCKTRSSI 0x7f
+#define bCCKRxAGCReport 0xfe
+#define bCCKRxReport_AntSel 0x80000000
+#define bCCKRxReport_MFOff 0x40000000
+#define bCCKRxRxReport_SQLoss 0x20000000
+#define bCCKRxReport_Pktloss 0x10000000
+#define bCCKRxReport_Lockedbit 0x08000000
+#define bCCKRxReport_RateError 0x04000000
+#define bCCKRxReport_RxRate 0x03000000
+#define bCCKRxFACounterLower 0xff
+#define bCCKRxFACounterUpper 0xff000000
+#define bCCKRxHPAGCStart 0xe000
+#define bCCKRxHPAGCFinal 0x1c00
+#define bCCKRxFalseAlarmEnable 0x8000
+#define bCCKFACounterFreeze 0x4000
+#define bCCKTxPathSel 0x10000000
+#define bCCKDefaultRxPath 0xc000000
+#define bCCKOptionRxPath 0x3000000
+
+/* 5. PageC(0xC00) */
+#define bNumOfSTF 0x3 /* Useless */
+#define bShift_L 0xc0
+#define bGI_TH 0xc
+#define bRxPathA 0x1
+#define bRxPathB 0x2
+#define bRxPathC 0x4
+#define bRxPathD 0x8
+#define bTxPathA 0x1
+#define bTxPathB 0x2
+#define bTxPathC 0x4
+#define bTxPathD 0x8
+#define bTRSSIFreq 0x200
+#define bADCBackoff 0x3000
+#define bDFIRBackoff 0xc000
+#define bTRSSILatchPhase 0x10000
+#define bRxIDCOffset 0xff
+#define bRxQDCOffset 0xff00
+#define bRxDFIRMode 0x1800000
+#define bRxDCNFType 0xe000000
+#define bRXIQImb_A 0x3ff
+#define bRXIQImb_B 0xfc00
+#define bRXIQImb_C 0x3f0000
+#define bRXIQImb_D 0xffc00000
+#define bDC_dc_Notch 0x60000
+#define bRxNBINotch 0x1f000000
+#define bPD_TH 0xf
+#define bPD_TH_Opt2 0xc000
+#define bPWED_TH 0x700
+#define bIfMF_Win_L 0x800
+#define bPD_Option 0x1000
+#define bMF_Win_L 0xe000
+#define bBW_Search_L 0x30000
+#define bwin_enh_L 0xc0000
+#define bBW_TH 0x700000
+#define bED_TH2 0x3800000
+#define bBW_option 0x4000000
+#define bRatio_TH 0x18000000
+#define bWindow_L 0xe0000000
+#define bSBD_Option 0x1
+#define bFrame_TH 0x1c
+#define bFS_Option 0x60
+#define bDC_Slope_check 0x80
+#define bFGuard_Counter_DC_L 0xe00
+#define bFrame_Weight_Short 0x7000
+#define bSub_Tune 0xe00000
+#define bFrame_DC_Length 0xe000000
+#define bSBD_start_offset 0x30000000
+#define bFrame_TH_2 0x7
+#define bFrame_GI2_TH 0x38
+#define bGI2_Sync_en 0x40
+#define bSarch_Short_Early 0x300
+#define bSarch_Short_Late 0xc00
+#define bSarch_GI2_Late 0x70000
+#define bCFOAntSum 0x1
+#define bCFOAcc 0x2
+#define bCFOStartOffset 0xc
+#define bCFOLookBack 0x70
+#define bCFOSumWeight 0x80
+#define bDAGCEnable 0x10000
+#define bTXIQImb_A 0x3ff
+#define bTXIQImb_B 0xfc00
+#define bTXIQImb_C 0x3f0000
+#define bTXIQImb_D 0xffc00000
+#define bTxIDCOffset 0xff
+#define bTxQDCOffset 0xff00
+#define bTxDFIRMode 0x10000
+#define bTxPesudoNoiseOn 0x4000000
+#define bTxPesudoNoise_A 0xff
+#define bTxPesudoNoise_B 0xff00
+#define bTxPesudoNoise_C 0xff0000
+#define bTxPesudoNoise_D 0xff000000
+#define bCCADropOption 0x20000
+#define bCCADropThres 0xfff00000
+#define bEDCCA_H 0xf
+#define bEDCCA_L 0xf0
+#define bLambda_ED 0x300
+#define bRxInitialGain 0x7f
+#define bRxAntDivEn 0x80
+#define bRxAGCAddressForLNA 0x7f00
+#define bRxHighPowerFlow 0x8000
+#define bRxAGCFreezeThres 0xc0000
+#define bRxFreezeStep_AGC1 0x300000
+#define bRxFreezeStep_AGC2 0xc00000
+#define bRxFreezeStep_AGC3 0x3000000
+#define bRxFreezeStep_AGC0 0xc000000
+#define bRxRssi_Cmp_En 0x10000000
+#define bRxQuickAGCEn 0x20000000
+#define bRxAGCFreezeThresMode 0x40000000
+#define bRxOverFlowCheckType 0x80000000
+#define bRxAGCShift 0x7f
+#define bTRSW_Tri_Only 0x80
+#define bPowerThres 0x300
+#define bRxAGCEn 0x1
+#define bRxAGCTogetherEn 0x2
+#define bRxAGCMin 0x4
+#define bRxHP_Ini 0x7
+#define bRxHP_TRLNA 0x70
+#define bRxHP_RSSI 0x700
+#define bRxHP_BBP1 0x7000
+#define bRxHP_BBP2 0x70000
+#define bRxHP_BBP3 0x700000
+#define bRSSI_H 0x7f0000 /* threshold for high power */
+#define bRSSI_Gen 0x7f000000 /* threshold for ant diversity */
+#define bRxSettle_TRSW 0x7
+#define bRxSettle_LNA 0x38
+#define bRxSettle_RSSI 0x1c0
+#define bRxSettle_BBP 0xe00
+#define bRxSettle_RxHP 0x7000
+#define bRxSettle_AntSW_RSSI 0x38000
+#define bRxSettle_AntSW 0xc0000
+#define bRxProcessTime_DAGC 0x300000
+#define bRxSettle_HSSI 0x400000
+#define bRxProcessTime_BBPPW 0x800000
+#define bRxAntennaPowerShift 0x3000000
+#define bRSSITableSelect 0xc000000
+#define bRxHP_Final 0x7000000
+#define bRxHTSettle_BBP 0x7
+#define bRxHTSettle_HSSI 0x8
+#define bRxHTSettle_RxHP 0x70
+#define bRxHTSettle_BBPPW 0x80
+#define bRxHTSettle_Idle 0x300
+#define bRxHTSettle_Reserved 0x1c00
+#define bRxHTRxHPEn 0x8000
+#define bRxHTAGCFreezeThres 0x30000
+#define bRxHTAGCTogetherEn 0x40000
+#define bRxHTAGCMin 0x80000
+#define bRxHTAGCEn 0x100000
+#define bRxHTDAGCEn 0x200000
+#define bRxHTRxHP_BBP 0x1c00000
+#define bRxHTRxHP_Final 0xe0000000
+#define bRxPWRatioTH 0x3
+#define bRxPWRatioEn 0x4
+#define bRxMFHold 0x3800
+#define bRxPD_Delay_TH1 0x38
+#define bRxPD_Delay_TH2 0x1c0
+#define bRxPD_DC_COUNT_MAX 0x600
+#define bRxPD_Delay_TH 0x8000
+#define bRxProcess_Delay 0xf0000
+#define bRxSearchrange_GI2_Early 0x700000
+#define bRxFrame_Guard_Counter_L 0x3800000
+#define bRxSGI_Guard_L 0xc000000
+#define bRxSGI_Search_L 0x30000000
+#define bRxSGI_TH 0xc0000000
+#define bDFSCnt0 0xff
+#define bDFSCnt1 0xff00
+#define bDFSFlag 0xf0000
+#define bMFWeightSum 0x300000
+#define bMinIdxTH 0x7f000000
+#define bDAFormat 0x40000
+#define bTxChEmuEnable 0x01000000
+#define bTRSWIsolation_A 0x7f
+#define bTRSWIsolation_B 0x7f00
+#define bTRSWIsolation_C 0x7f0000
+#define bTRSWIsolation_D 0x7f000000
+#define bExtLNAGain 0x7c00
+
+/* 6. PageE(0xE00) */
+#define bSTBCEn 0x4 /* Useless */
+#define bAntennaMapping 0x10
+#define bNss 0x20
+#define bCFOAntSumD 0x200
+#define bPHYCounterReset 0x8000000
+#define bCFOReportGet 0x4000000
+#define bOFDMContinueTx 0x10000000
+#define bOFDMSingleCarrier 0x20000000
+#define bOFDMSingleTone 0x40000000
+#define bHTDetect 0x100
+#define bCFOEn 0x10000
+#define bCFOValue 0xfff00000
+#define bSigTone_Re 0x3f
+#define bSigTone_Im 0x7f00
+#define bCounter_CCA 0xffff
+#define bCounter_ParityFail 0xffff0000
+#define bCounter_RateIllegal 0xffff
+#define bCounter_CRC8Fail 0xffff0000
+#define bCounter_MCSNoSupport 0xffff
+#define bCounter_FastSync 0xffff
+#define bShortCFO 0xfff
+#define bShortCFOTLength 12 /* total */
+#define bShortCFOFLength 11 /* fraction */
+#define bLongCFO 0x7ff
+#define bLongCFOTLength 11
+#define bLongCFOFLength 11
+#define bTailCFO 0x1fff
+#define bTailCFOTLength 13
+#define bTailCFOFLength 12
+#define bmax_en_pwdB 0xffff
+#define bCC_power_dB 0xffff0000
+#define bnoise_pwdB 0xffff
+#define bPowerMeasTLength 10
+#define bPowerMeasFLength 3
+#define bRx_HT_BW 0x1
+#define bRxSC 0x6
+#define bRx_HT 0x8
+#define bNB_intf_det_on 0x1
+#define bIntf_win_len_cfg 0x30
+#define bNB_Intf_TH_cfg 0x1c0
+#define bRFGain 0x3f
+#define bTableSel 0x40
+#define bTRSW 0x80
+#define bRxSNR_A 0xff
+#define bRxSNR_B 0xff00
+#define bRxSNR_C 0xff0000
+#define bRxSNR_D 0xff000000
+#define bSNREVMTLength 8
+#define bSNREVMFLength 1
+#define bCSI1st 0xff
+#define bCSI2nd 0xff00
+#define bRxEVM1st 0xff0000
+#define bRxEVM2nd 0xff000000
+#define bSIGEVM 0xff
+#define bPWDB 0xff00
+#define bSGIEN 0x10000
+
+#define bSFactorQAM1 0xf /* Useless */
+#define bSFactorQAM2 0xf0
+#define bSFactorQAM3 0xf00
+#define bSFactorQAM4 0xf000
+#define bSFactorQAM5 0xf0000
+#define bSFactorQAM6 0xf0000
+#define bSFactorQAM7 0xf00000
+#define bSFactorQAM8 0xf000000
+#define bSFactorQAM9 0xf0000000
+#define bCSIScheme 0x100000
+
+#define bNoiseLvlTopSet 0x3 /* Useless */
+#define bChSmooth 0x4
+#define bChSmoothCfg1 0x38
+#define bChSmoothCfg2 0x1c0
+#define bChSmoothCfg3 0xe00
+#define bChSmoothCfg4 0x7000
+#define bMRCMode 0x800000
+#define bTHEVMCfg 0x7000000
+
+#define bLoopFitType 0x1 /* Useless */
+#define bUpdCFO 0x40
+#define bUpdCFOOffData 0x80
+#define bAdvUpdCFO 0x100
+#define bAdvTimeCtrl 0x800
+#define bUpdClko 0x1000
+#define bFC 0x6000
+#define bTrackingMode 0x8000
+#define bPhCmpEnable 0x10000
+#define bUpdClkoLTF 0x20000
+#define bComChCFO 0x40000
+#define bCSIEstiMode 0x80000
+#define bAdvUpdEqz 0x100000
+#define bUChCfg 0x7000000
+#define bUpdEqz 0x8000000
+
+/* Rx Pseduo noise */
+#define bRxPesudoNoiseOn 0x20000000 /* Useless */
+#define bRxPesudoNoise_A 0xff
+#define bRxPesudoNoise_B 0xff00
+#define bRxPesudoNoise_C 0xff0000
+#define bRxPesudoNoise_D 0xff000000
+#define bPesudoNoiseState_A 0xffff
+#define bPesudoNoiseState_B 0xffff0000
+#define bPesudoNoiseState_C 0xffff
+#define bPesudoNoiseState_D 0xffff0000
+
+/* 7. RF Register */
+/* Zebra1 */
+#define bZebra1_HSSIEnable 0x8 /* Useless */
+#define bZebra1_TRxControl 0xc00
+#define bZebra1_TRxGainSetting 0x07f
+#define bZebra1_RxCorner 0xc00
+#define bZebra1_TxChargePump 0x38
+#define bZebra1_RxChargePump 0x7
+#define bZebra1_ChannelNum 0xf80
+#define bZebra1_TxLPFBW 0x400
+#define bZebra1_RxLPFBW 0x600
+
+/* Zebra4 */
+#define bRTL8256RegModeCtrl1 0x100 /* Useless */
+#define bRTL8256RegModeCtrl0 0x40
+#define bRTL8256_TxLPFBW 0x18
+#define bRTL8256_RxLPFBW 0x600
+
+/* RTL8258 */
+#define bRTL8258_TxLPFBW 0xc /* Useless */
+#define bRTL8258_RxLPFBW 0xc00
+#define bRTL8258_RSSILPFBW 0xc0
+
+/* */
+/* Other Definition */
+/* */
+
+/* byte endable for sb_write */
+#define bByte0 0x1 /* Useless */
+#define bByte1 0x2
+#define bByte2 0x4
+#define bByte3 0x8
+#define bWord0 0x3
+#define bWord1 0xc
+#define bDWord 0xf
+
+/* for PutRegsetting & GetRegSetting BitMask */
+#define bMaskByte0 0xff /* Reg 0xc50 rOFDM0_XAAGCCore~0xC6f */
+#define bMaskByte1 0xff00
+#define bMaskByte2 0xff0000
+#define bMaskByte3 0xff000000
+#define bMaskHWord 0xffff0000
+#define bMaskLWord 0x0000ffff
+#define bMaskDWord 0xffffffff
+#define bMask12Bits 0xfff
+#define bMaskH4Bits 0xf0000000
+#define bMaskOFDM_D 0xffc00000
+#define bMaskCCK 0x3f3f3f3f
+
+/* for PutRFRegsetting & GetRFRegSetting BitMask */
+#define bRFRegOffsetMask 0xfffff
+
+#define bEnable 0x1 /* Useless */
+#define bDisable 0x0
+
+#define LeftAntenna 0x0 /* Useless */
+#define RightAntenna 0x1
+
+#define tCheckTxStatus 500 /* 500ms Useless */
+#define tUpdateRxCounter 100 /* 100ms */
+
+#define rateCCK 0 /* Useless */
+#define rateOFDM 1
+#define rateHT 2
+
+/* define Register-End */
+#define bPMAC_End 0x1ff /* Useless */
+#define bFPGAPHY0_End 0x8ff
+#define bFPGAPHY1_End 0x9ff
+#define bCCKPHY0_End 0xaff
+#define bOFDMPHY0_End 0xcff
+#define bOFDMPHY1_End 0xdff
+
+#define bPMACControl 0x0 /* Useless */
+#define bWMACControl 0x1
+#define bWNICControl 0x2
+
+#define PathA 0x0 /* Useless */
+#define PathB 0x1
+#define PathC 0x2
+#define PathD 0x3
+
+/*--------------------------Define Parameters-------------------------------*/
+
+#endif
diff --git a/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
new file mode 100644
index 000000000000..df151b76f302
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
@@ -0,0 +1,173 @@
+
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HAL8188EPWRSEQ_H__
+#define __HAL8188EPWRSEQ_H__
+
+#include "HalPwrSeqCmd.h"
+
+/*
+ Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
+ There are 6 HW Power States:
+ 0: POFF--Power Off
+ 1: PDN--Power Down
+ 2: CARDEMU--Card Emulation
+ 3: ACT--Active Mode
+ 4: LPS--Low Power State
+ 5: SUS--Suspend
+
+ The transision from different states are defined below
+ TRANS_CARDEMU_TO_ACT
+ TRANS_ACT_TO_CARDEMU
+ TRANS_CARDEMU_TO_SUS
+ TRANS_SUS_TO_CARDEMU
+ TRANS_CARDEMU_TO_PDN
+ TRANS_ACT_TO_LPS
+ TRANS_LPS_TO_ACT
+
+ TRANS_END
+
+ PWR SEQ Version: rtl8188E_PwrSeq_V09.h
+*/
+#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
+#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
+#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8188E_TRANS_END_STEPS 1
+
+#define RTL8188E_TRANS_CARDEMU_TO_ACT \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1},/* wait till 0x04[17] = 1 power ready*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, /* 0x02[1:0] = 0 reset BB*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, /* 0x04[15] = 0 disable HWPDN (control by DRV)*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, /*0x04[8] = 1 polling until return 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, /*wait till 0x04[8] = 0*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*LDO normal mode*/ \
+ {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*SDIO Driving*/ \
+
+#define RTL8188E_TRANS_ACT_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*LDO Sleep mode*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
+
+#define RTL8188E_TRANS_CARDEMU_TO_SUS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT7}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_SUS_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_PDN \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/* 0x04[16] = 0*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7},/* 0x04[15] = 1*/
+
+#define RTL8188E_TRANS_PDN_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0},/* 0x04[15] = 0*/
+
+/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
+#define RTL8188E_TRANS_ACT_TO_LPS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/*CCK and OFDM are disabled,and clock are gated*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/ \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5},/*Respond TxOK to scheduler*/ \
+
+#define RTL8188E_TRANS_LPS_TO_ACT \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/\
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/\
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/\
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/\
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*. 0x08[4] = 0 switch TSF to 40M*/\
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, /*Polling 0x109[7]=0 TSF in 40M*/\
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, /*. 0x29[7:6] = 2b'00 enable BB clock*/\
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*. 0x101[1] = 1*/\
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, /*. 0x02[1:0] = 2b'11 enable BB macro*/\
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
+
+#define RTL8188E_TRANS_END \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,0, PWR_CMD_END, 0, 0}, /* */
+
+extern struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_enable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
+
+#endif /* __HAL8188EPWRSEQ_H__ */
diff --git a/drivers/staging/r8188eu/include/Hal8188ERateAdaptive.h b/drivers/staging/r8188eu/include/Hal8188ERateAdaptive.h
new file mode 100644
index 000000000000..21996a1173ef
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188ERateAdaptive.h
@@ -0,0 +1,75 @@
+#ifndef __INC_RA_H
+#define __INC_RA_H
+/*++
+Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+
+Module Name:
+ RateAdaptive.h
+
+Abstract:
+ Prototype of RA and related data structure.
+
+Major Change History:
+ When Who What
+ ---------- --------------- -------------------------------
+ 2011-08-12 Page Create.
+--*/
+
+/* Rate adaptive define */
+#define PERENTRY 23
+#define RETRYSIZE 5
+#define RATESIZE 28
+#define TX_RPT2_ITEM_SIZE 8
+
+/* */
+/* TX report 2 format in Rx desc */
+/* */
+#define GET_TX_RPT2_DESC_PKT_LEN_88E(__pRxStatusDesc) \
+ LE_BITS_TO_4BYTE(__pRxStatusDesc, 0, 9)
+#define GET_TX_RPT2_DESC_MACID_VALID_1_88E(__pRxStatusDesc) \
+ LE_BITS_TO_4BYTE(__pRxStatusDesc+16, 0, 32)
+#define GET_TX_RPT2_DESC_MACID_VALID_2_88E(__pRxStatusDesc) \
+ LE_BITS_TO_4BYTE(__pRxStatusDesc+20, 0, 32)
+
+#define GET_TX_REPORT_TYPE1_RERTY_0(__pAddr) \
+ LE_BITS_TO_4BYTE(__pAddr, 0, 16)
+#define GET_TX_REPORT_TYPE1_RERTY_1(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+2, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_2(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+3, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_3(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_4(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4+1, 0, 8)
+#define GET_TX_REPORT_TYPE1_DROP_0(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4+2, 0, 8)
+#define GET_TX_REPORT_TYPE1_DROP_1(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4+3, 0, 8)
+
+/* End rate adaptive define */
+
+void ODM_RASupport_Init(struct odm_dm_struct *dm_odm);
+
+int ODM_RAInfo_Init_all(struct odm_dm_struct *dm_odm);
+
+int ODM_RAInfo_Init(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetShortGI_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetDecisionRate_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetHwPwrStatus_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+void ODM_RA_UpdateRateInfo_8188E(struct odm_dm_struct *dm_odm, u8 MacID,
+ u8 RateID, u32 RateMask,
+ u8 SGIEnable);
+
+void ODM_RA_SetRSSI_8188E(struct odm_dm_struct *dm_odm, u8 macid,
+ u8 rssi);
+
+void ODM_RA_TxRPT2Handle_8188E(struct odm_dm_struct *dm_odm,
+ u8 *txrpt_buf, u16 txrpt_len,
+ u32 validentry0, u32 validentry1);
+
+void ODM_RA_Set_TxRPT_Time(struct odm_dm_struct *dm_odm, u16 minRptTime);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/Hal8188EReg.h b/drivers/staging/r8188eu/include/Hal8188EReg.h
new file mode 100644
index 000000000000..06818ac6c330
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188EReg.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/* */
+/* File Name: Hal8188EReg.h */
+/* */
+/* Description: */
+/* */
+/* This file is for RTL8188E register definition. */
+/* */
+/* */
+/* */
+#ifndef __HAL_8188E_REG_H__
+#define __HAL_8188E_REG_H__
+
+/* */
+/* Register Definition */
+/* */
+#define TRX_ANTDIV_PATH 0x860
+#define RX_ANTDIV_PATH 0xb2c
+#define ODM_R_A_AGC_CORE1_8188E 0xc50
+
+/* */
+/* Bitmap Definition */
+/* */
+#define BIT_FA_RESET_8188E BIT0
+
+#endif
diff --git a/drivers/staging/r8188eu/include/HalHWImg8188E_BB.h b/drivers/staging/r8188eu/include/HalHWImg8188E_BB.h
new file mode 100644
index 000000000000..e57452104bfb
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalHWImg8188E_BB.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_BB_8188E_HW_IMG_H
+#define __INC_BB_8188E_HW_IMG_H
+
+/* static bool CheckCondition(const u32 Condition, const u32 Hex); */
+
+/******************************************************************************
+* AGC_TAB_1T.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_AGC_TAB_1T_8188E(struct odm_dm_struct *odm);
+
+/******************************************************************************
+* PHY_REG_1T.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_PHY_REG_1T_8188E(struct odm_dm_struct *odm);
+
+/******************************************************************************
+* PHY_REG_PG.TXT
+******************************************************************************/
+
+void ODM_ReadAndConfig_PHY_REG_PG_8188E(struct odm_dm_struct *dm_odm);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/HalHWImg8188E_FW.h b/drivers/staging/r8188eu/include/HalHWImg8188E_FW.h
new file mode 100644
index 000000000000..ce81fea401a1
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalHWImg8188E_FW.h
@@ -0,0 +1,33 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_FW_8188E_HW_IMG_H
+#define __INC_FW_8188E_HW_IMG_H
+
+/******************************************************************************
+* FW_AP.TXT
+******************************************************************************/
+/******************************************************************************
+* FW_WoWLAN.TXT
+******************************************************************************/
+#define ArrayLength_8188E_FW_WoWLAN 15764
+extern const u8 Array_8188E_FW_WoWLAN[ArrayLength_8188E_FW_WoWLAN];
+
+#endif
diff --git a/drivers/staging/r8188eu/include/HalHWImg8188E_MAC.h b/drivers/staging/r8188eu/include/HalHWImg8188E_MAC.h
new file mode 100644
index 000000000000..acf78b94fddb
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalHWImg8188E_MAC.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_MAC_8188E_HW_IMG_H
+#define __INC_MAC_8188E_HW_IMG_H
+
+/******************************************************************************
+* MAC_REG.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_MAC_REG_8188E(struct odm_dm_struct *pDM_Odm);
+
+#endif /* end of HWIMG_SUPPORT */
diff --git a/drivers/staging/r8188eu/include/HalHWImg8188E_RF.h b/drivers/staging/r8188eu/include/HalHWImg8188E_RF.h
new file mode 100644
index 000000000000..8ecb40d26c70
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalHWImg8188E_RF.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_RF_8188E_HW_IMG_H
+#define __INC_RF_8188E_HW_IMG_H
+
+/******************************************************************************
+ * RadioA_1T.TXT
+ ******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_RadioA_1T_8188E(struct odm_dm_struct *odm);
+
+#endif /* end of HWIMG_SUPPORT */
diff --git a/drivers/staging/r8188eu/include/HalPhyRf.h b/drivers/staging/r8188eu/include/HalPhyRf.h
new file mode 100644
index 000000000000..1ec497100da1
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalPhyRf.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+ #ifndef __HAL_PHY_RF_H__
+ #define __HAL_PHY_RF_H__
+
+#define ODM_TARGET_CHNL_NUM_2G_5G 59
+
+void ODM_ResetIQKResult(struct odm_dm_struct *pDM_Odm);
+
+u8 ODM_GetRightChnlPlaceforIQK(u8 chnl);
+
+#endif /* #ifndef __HAL_PHY_RF_H__ */
diff --git a/drivers/staging/r8188eu/include/HalPhyRf_8188e.h b/drivers/staging/r8188eu/include/HalPhyRf_8188e.h
new file mode 100644
index 000000000000..807c301a86e4
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalPhyRf_8188e.h
@@ -0,0 +1,58 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HAL_PHY_RF_8188E_H__
+#define __HAL_PHY_RF_8188E_H__
+
+/*--------------------------Define Parameters-------------------------------*/
+#define IQK_DELAY_TIME_88E 10 /* ms */
+#define index_mapping_NUM_88E 15
+#define AVG_THERMAL_NUM_88E 4
+
+void ODM_TxPwrTrackAdjust88E(struct odm_dm_struct *pDM_Odm,
+ u8 Type, /* 0 = OFDM, 1 = CCK */
+ u8 *pDirection,/* 1 = +(incr) 2 = -(decr) */
+ u32 *pOutWriteVal); /* Tx tracking CCK/OFDM BB
+ * swing index adjust */
+
+void odm_TXPowerTrackingCallback_ThermalMeter_8188E(struct adapter *Adapter);
+
+/* 1 7. IQK */
+
+void PHY_IQCalibrate_8188E(struct adapter *Adapter, bool ReCovery);
+
+/* LC calibrate */
+void PHY_LCCalibrate_8188E(struct adapter *pAdapter);
+
+/* AP calibrate */
+void PHY_DigitalPredistortion_8188E(struct adapter *pAdapter);
+
+void _PHY_SaveADDARegisters(struct adapter *pAdapter, u32 *ADDAReg,
+ u32 *ADDABackup, u32 RegisterNum);
+
+void _PHY_PathADDAOn(struct adapter *pAdapter, u32 *ADDAReg,
+ bool isPathAOn, bool is2T);
+
+void _PHY_MACSettingCalibration(struct adapter *pAdapter, u32 *MACReg,
+ u32 *MACBackup);
+
+void _PHY_PathAStandBy(struct adapter *pAdapter);
+
+#endif /* #ifndef __HAL_PHY_RF_8188E_H__ */
diff --git a/drivers/staging/r8188eu/include/HalPwrSeqCmd.h b/drivers/staging/r8188eu/include/HalPwrSeqCmd.h
new file mode 100644
index 000000000000..c591e9d1c23b
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalPwrSeqCmd.h
@@ -0,0 +1,126 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HALPWRSEQCMD_H__
+#define __HALPWRSEQCMD_H__
+
+#include <drv_types.h>
+
+/*---------------------------------------------*/
+/* 3 The value of cmd: 4 bits */
+/*---------------------------------------------*/
+#define PWR_CMD_READ 0x00
+ /* offset: the read register offset */
+ /* msk: the mask of the read value */
+ /* value: N/A, left by 0 */
+ /* note: dirver shall implement this function by read & msk */
+
+#define PWR_CMD_WRITE 0x01
+ /* offset: the read register offset */
+ /* msk: the mask of the write bits */
+ /* value: write value */
+ /* note: driver shall implement this cmd by read & msk after write */
+
+#define PWR_CMD_POLLING 0x02
+ /* offset: the read register offset */
+ /* msk: the mask of the polled value */
+ /* value: the value to be polled, masked by the msd field. */
+ /* note: driver shall implement this cmd by */
+ /* do{ */
+ /* if ( (Read(offset) & msk) == (value & msk) ) */
+ /* break; */
+ /* } while (not timeout); */
+
+#define PWR_CMD_DELAY 0x03
+ /* offset: the value to delay */
+ /* msk: N/A */
+ /* value: the unit of delay, 0: us, 1: ms */
+
+#define PWR_CMD_END 0x04
+ /* offset: N/A */
+ /* msk: N/A */
+ /* value: N/A */
+
+/*---------------------------------------------*/
+/* 3 The value of base: 4 bits */
+/*---------------------------------------------*/
+ /* define the base address of each block */
+#define PWR_BASEADDR_MAC 0x00
+#define PWR_BASEADDR_USB 0x01
+#define PWR_BASEADDR_PCIE 0x02
+#define PWR_BASEADDR_SDIO 0x03
+
+/*---------------------------------------------*/
+/* 3 The value of interface_msk: 4 bits */
+/*---------------------------------------------*/
+#define PWR_INTF_SDIO_MSK BIT(0)
+#define PWR_INTF_USB_MSK BIT(1)
+#define PWR_INTF_PCI_MSK BIT(2)
+#define PWR_INTF_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
+
+/*---------------------------------------------*/
+/* 3 The value of fab_msk: 4 bits */
+/*---------------------------------------------*/
+#define PWR_FAB_TSMC_MSK BIT(0)
+#define PWR_FAB_UMC_MSK BIT(1)
+#define PWR_FAB_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
+
+/*---------------------------------------------*/
+/* 3 The value of cut_msk: 8 bits */
+/*---------------------------------------------*/
+#define PWR_CUT_TESTCHIP_MSK BIT(0)
+#define PWR_CUT_A_MSK BIT(1)
+#define PWR_CUT_B_MSK BIT(2)
+#define PWR_CUT_C_MSK BIT(3)
+#define PWR_CUT_D_MSK BIT(4)
+#define PWR_CUT_E_MSK BIT(5)
+#define PWR_CUT_F_MSK BIT(6)
+#define PWR_CUT_G_MSK BIT(7)
+#define PWR_CUT_ALL_MSK 0xFF
+
+enum pwrseq_cmd_delat_unit {
+ PWRSEQ_DELAY_US,
+ PWRSEQ_DELAY_MS,
+};
+
+struct wl_pwr_cfg {
+ u16 offset;
+ u8 cut_msk;
+ u8 fab_msk:4;
+ u8 interface_msk:4;
+ u8 base:4;
+ u8 cmd:4;
+ u8 msk;
+ u8 value;
+};
+
+#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset
+#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk
+#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) __PWR_CMD.fab_msk
+#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) __PWR_CMD.interface_msk
+#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base
+#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd
+#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk
+#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value
+
+/* Prototype of protected function. */
+u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 CutVersion, u8 FabVersion,
+ u8 InterfaceType, struct wl_pwr_cfg PwrCfgCmd[]);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/HalVerDef.h b/drivers/staging/r8188eu/include/HalVerDef.h
new file mode 100644
index 000000000000..2a7dc28b8de7
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalVerDef.h
@@ -0,0 +1,166 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HAL_VERSION_DEF_H__
+#define __HAL_VERSION_DEF_H__
+
+enum HAL_IC_TYPE {
+ CHIP_8192S = 0,
+ CHIP_8188C = 1,
+ CHIP_8192C = 2,
+ CHIP_8192D = 3,
+ CHIP_8723A = 4,
+ CHIP_8188E = 5,
+ CHIP_8881A = 6,
+ CHIP_8812A = 7,
+ CHIP_8821A = 8,
+ CHIP_8723B = 9,
+ CHIP_8192E = 10,
+};
+
+enum HAL_CHIP_TYPE {
+ TEST_CHIP = 0,
+ NORMAL_CHIP = 1,
+ FPGA = 2,
+};
+
+enum HAL_CUT_VERSION {
+ A_CUT_VERSION = 0,
+ B_CUT_VERSION = 1,
+ C_CUT_VERSION = 2,
+ D_CUT_VERSION = 3,
+ E_CUT_VERSION = 4,
+ F_CUT_VERSION = 5,
+ G_CUT_VERSION = 6,
+};
+
+enum HAL_VENDOR {
+ CHIP_VENDOR_TSMC = 0,
+ CHIP_VENDOR_UMC = 1,
+};
+
+enum HAL_RF_TYPE {
+ RF_TYPE_1T1R = 0,
+ RF_TYPE_1T2R = 1,
+ RF_TYPE_2T2R = 2,
+ RF_TYPE_2T3R = 3,
+ RF_TYPE_2T4R = 4,
+ RF_TYPE_3T3R = 5,
+ RF_TYPE_3T4R = 6,
+ RF_TYPE_4T4R = 7,
+};
+
+struct HAL_VERSION {
+ enum HAL_IC_TYPE ICType;
+ enum HAL_CHIP_TYPE ChipType;
+ enum HAL_CUT_VERSION CUTVersion;
+ enum HAL_VENDOR VendorType;
+ enum HAL_RF_TYPE RFType;
+ u8 ROMVer;
+};
+
+/* Get element */
+#define GET_CVID_IC_TYPE(version) (((version).ICType))
+#define GET_CVID_CHIP_TYPE(version) (((version).ChipType))
+#define GET_CVID_RF_TYPE(version) (((version).RFType))
+#define GET_CVID_MANUFACTUER(version) (((version).VendorType))
+#define GET_CVID_CUT_VERSION(version) (((version).CUTVersion))
+#define GET_CVID_ROM_VERSION(version) (((version).ROMVer) & ROM_VERSION_MASK)
+
+/* Common Macro. -- */
+/* HAL_VERSION VersionID */
+
+/* HAL_IC_TYPE_E */
+#define IS_81XXC(version) \
+ (((GET_CVID_IC_TYPE(version) == CHIP_8192C) || \
+ (GET_CVID_IC_TYPE(version) == CHIP_8188C)) ? true : false)
+#define IS_8723_SERIES(version) \
+ ((GET_CVID_IC_TYPE(version) == CHIP_8723A) ? true : false)
+#define IS_92D(version) \
+ ((GET_CVID_IC_TYPE(version) == CHIP_8192D) ? true : false)
+#define IS_8188E(version) \
+ ((GET_CVID_IC_TYPE(version) == CHIP_8188E) ? true : false)
+
+/* HAL_CHIP_TYPE_E */
+#define IS_TEST_CHIP(version) \
+ ((GET_CVID_CHIP_TYPE(version) == TEST_CHIP) ? true : false)
+#define IS_NORMAL_CHIP(version) \
+ ((GET_CVID_CHIP_TYPE(version) == NORMAL_CHIP) ? true : false)
+
+/* HAL_CUT_VERSION_E */
+#define IS_A_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == A_CUT_VERSION) ? true : false)
+#define IS_B_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == B_CUT_VERSION) ? true : false)
+#define IS_C_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == C_CUT_VERSION) ? true : false)
+#define IS_D_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == D_CUT_VERSION) ? true : false)
+#define IS_E_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == E_CUT_VERSION) ? true : false)
+
+/* HAL_VENDOR_E */
+#define IS_CHIP_VENDOR_TSMC(version) \
+ ((GET_CVID_MANUFACTUER(version) == CHIP_VENDOR_TSMC) ? true : false)
+#define IS_CHIP_VENDOR_UMC(version) \
+ ((GET_CVID_MANUFACTUER(version) == CHIP_VENDOR_UMC) ? true : false)
+
+/* HAL_RF_TYPE_E */
+#define IS_1T1R(version) \
+ ((GET_CVID_RF_TYPE(version) == RF_TYPE_1T1R) ? true : false)
+#define IS_1T2R(version) \
+ ((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R) ? true : false)
+#define IS_2T2R(version) \
+ ((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R) ? true : false)
+
+/* Chip version Macro. -- */
+#define IS_81XXC_TEST_CHIP(version) \
+ ((IS_81XXC(version) && (!IS_NORMAL_CHIP(version))) ? true : false)
+
+#define IS_92C_SERIAL(version) \
+ ((IS_81XXC(version) && IS_2T2R(version)) ? true : false)
+#define IS_81xxC_VENDOR_UMC_A_CUT(version) \
+ (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+ (IS_A_CUT(version) ? true : false) : false) : false)
+#define IS_81xxC_VENDOR_UMC_B_CUT(version) \
+ (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+ (IS_B_CUT(version) ? true : false) : false) : false)
+#define IS_81xxC_VENDOR_UMC_C_CUT(version) \
+ (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+ (IS_C_CUT(version) ? true : false) : false) : false)
+
+#define IS_NORMAL_CHIP92D(version) \
+ ((IS_92D(version)) ? \
+ ((GET_CVID_CHIP_TYPE(version) == NORMAL_CHIP) ? true : false) : false)
+
+#define IS_92D_SINGLEPHY(version) \
+ ((IS_92D(version)) ? (IS_2T2R(version) ? true : false) : false)
+#define IS_92D_C_CUT(version) \
+ ((IS_92D(version)) ? (IS_C_CUT(version) ? true : false) : false)
+#define IS_92D_D_CUT(version) \
+ ((IS_92D(version)) ? (IS_D_CUT(version) ? true : false) : false)
+#define IS_92D_E_CUT(version) \
+ ((IS_92D(version)) ? (IS_E_CUT(version) ? true : false) : false)
+
+#define IS_8723A_A_CUT(version) \
+ ((IS_8723_SERIES(version)) ? (IS_A_CUT(version) ? true : false) : false)
+#define IS_8723A_B_CUT(version) \
+ ((IS_8723_SERIES(version)) ? (IS_B_CUT(version) ? true : false) : false)
+
+#endif
diff --git a/drivers/staging/r8188eu/include/autoconf.h b/drivers/staging/r8188eu/include/autoconf.h
new file mode 100644
index 000000000000..cfa790794fd3
--- /dev/null
+++ b/drivers/staging/r8188eu/include/autoconf.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+/* temporarily flag ******* */
+/*
+ * Public General Config
+ */
+#define RTL871X_MODULE_NAME "88EU"
+#define DRV_NAME "rtl8188eu"
+
+/*
+ * Internal General Config
+ */
+
+#define CONFIG_AP_MODE
+
+#define CONFIG_P2P
+
+#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
+
+#define CONFIG_BR_EXT_BRNAME "br0"
+
+/*
+ * Debug Related Config
+ */
+#define DBG 1
diff --git a/drivers/staging/r8188eu/include/basic_types.h b/drivers/staging/r8188eu/include/basic_types.h
new file mode 100644
index 000000000000..8a7ca992674a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/basic_types.h
@@ -0,0 +1,184 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __BASIC_TYPES_H__
+#define __BASIC_TYPES_H__
+
+#define SUCCESS 0
+#define FAIL (-1)
+
+#include <linux/types.h>
+#define NDIS_OID uint
+
+typedef void (*proc_t)(void *);
+
+#define FIELD_OFFSET(s, field) ((ssize_t)&((s *)(0))->field)
+
+#define MEM_ALIGNMENT_OFFSET (sizeof(size_t))
+#define MEM_ALIGNMENT_PADDING (sizeof(size_t) - 1)
+
+/* port from fw */
+/* TODO: Macros Below are Sync from SD7-Driver. It is necessary
+ * to check correctness */
+
+/*
+ * Call endian free function when
+ * 1. Read/write packet content.
+ * 2. Before write integer to IO.
+ * 3. After read integer from IO.
+*/
+
+/* Convert little data endian to host ordering */
+#define EF1BYTE(_val) \
+ ((u8)(_val))
+#define EF2BYTE(_val) \
+ (le16_to_cpu(_val))
+#define EF4BYTE(_val) \
+ (le32_to_cpu(_val))
+
+/* Read data from memory */
+#define READEF1BYTE(_ptr) \
+ EF1BYTE(*((u8 *)(_ptr)))
+/* Read le16 data from memory and convert to host ordering */
+#define READEF2BYTE(_ptr) \
+ EF2BYTE(*(_ptr))
+#define READEF4BYTE(_ptr) \
+ EF4BYTE(*(_ptr))
+
+/* Write data to memory */
+#define WRITEEF1BYTE(_ptr, _val) \
+ do { \
+ (*((u8 *)(_ptr))) = EF1BYTE(_val) \
+ } while (0)
+/* Write le data to memory in host ordering */
+#define WRITEEF2BYTE(_ptr, _val) \
+ do { \
+ (*((u16 *)(_ptr))) = EF2BYTE(_val) \
+ } while (0)
+
+#define WRITEEF4BYTE(_ptr, _val) \
+ do { \
+ (*((u32 *)(_ptr))) = EF2BYTE(_val) \
+ } while (0)
+
+/* Create a bit mask
+ * Examples:
+ * BIT_LEN_MASK_32(0) => 0x00000000
+ * BIT_LEN_MASK_32(1) => 0x00000001
+ * BIT_LEN_MASK_32(2) => 0x00000003
+ * BIT_LEN_MASK_32(32) => 0xFFFFFFFF
+ */
+#define BIT_LEN_MASK_32(__bitlen) \
+ (0xFFFFFFFF >> (32 - (__bitlen)))
+#define BIT_LEN_MASK_16(__bitlen) \
+ (0xFFFF >> (16 - (__bitlen)))
+#define BIT_LEN_MASK_8(__bitlen) \
+ (0xFF >> (8 - (__bitlen)))
+
+/* Create an offset bit mask
+ * Examples:
+ * BIT_OFFSET_LEN_MASK_32(0, 2) => 0x00000003
+ * BIT_OFFSET_LEN_MASK_32(16, 2) => 0x00030000
+ */
+#define BIT_OFFSET_LEN_MASK_32(__bitoffset, __bitlen) \
+ (BIT_LEN_MASK_32(__bitlen) << (__bitoffset))
+#define BIT_OFFSET_LEN_MASK_16(__bitoffset, __bitlen) \
+ (BIT_LEN_MASK_16(__bitlen) << (__bitoffset))
+#define BIT_OFFSET_LEN_MASK_8(__bitoffset, __bitlen) \
+ (BIT_LEN_MASK_8(__bitlen) << (__bitoffset))
+
+/*Description:
+ * Return 4-byte value in host byte ordering from
+ * 4-byte pointer in little-endian system.
+ */
+#define LE_P4BYTE_TO_HOST_4BYTE(__pstart) \
+ (EF4BYTE(*((__le32 *)(__pstart))))
+#define LE_P2BYTE_TO_HOST_2BYTE(__pstart) \
+ (EF2BYTE(*((__le16 *)(__pstart))))
+#define LE_P1BYTE_TO_HOST_1BYTE(__pstart) \
+ (EF1BYTE(*((u8 *)(__pstart))))
+
+/*Description:
+Translate subfield (continuous bits in little-endian) of 4-byte
+value to host byte ordering.*/
+#define LE_BITS_TO_4BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ (LE_P4BYTE_TO_HOST_4BYTE(__pstart) >> (__bitoffset)) & \
+ BIT_LEN_MASK_32(__bitlen) \
+ )
+#define LE_BITS_TO_2BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ (LE_P2BYTE_TO_HOST_2BYTE(__pstart) >> (__bitoffset)) & \
+ BIT_LEN_MASK_16(__bitlen) \
+ )
+#define LE_BITS_TO_1BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ (LE_P1BYTE_TO_HOST_1BYTE(__pstart) >> (__bitoffset)) & \
+ BIT_LEN_MASK_8(__bitlen) \
+ )
+
+/* Description:
+ * Mask subfield (continuous bits in little-endian) of 4-byte value
+ * and return the result in 4-byte value in host byte ordering.
+ */
+#define LE_BITS_CLEARED_TO_4BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ LE_P4BYTE_TO_HOST_4BYTE(__pstart) & \
+ (~BIT_OFFSET_LEN_MASK_32(__bitoffset, __bitlen)) \
+ )
+#define LE_BITS_CLEARED_TO_2BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ LE_P2BYTE_TO_HOST_2BYTE(__pstart) & \
+ (~BIT_OFFSET_LEN_MASK_16(__bitoffset, __bitlen)) \
+ )
+#define LE_BITS_CLEARED_TO_1BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ LE_P1BYTE_TO_HOST_1BYTE(__pstart) & \
+ (~BIT_OFFSET_LEN_MASK_8(__bitoffset, __bitlen)) \
+ )
+
+/* Description:
+ * Set subfield of little-endian 4-byte value to specified value.
+ */
+#define SET_BITS_TO_LE_4BYTE(__pstart, __bitoffset, __bitlen, __val) \
+ *((u32 *)(__pstart)) = \
+ ( \
+ LE_BITS_CLEARED_TO_4BYTE(__pstart, __bitoffset, __bitlen) | \
+ ((((u32)__val) & BIT_LEN_MASK_32(__bitlen)) << (__bitoffset)) \
+ )
+
+#define SET_BITS_TO_LE_2BYTE(__pstart, __bitoffset, __bitlen, __val) \
+ *((u16 *)(__pstart)) = \
+ ( \
+ LE_BITS_CLEARED_TO_2BYTE(__pstart, __bitoffset, __bitlen) | \
+ ((((u16)__val) & BIT_LEN_MASK_16(__bitlen)) << (__bitoffset)) \
+ );
+
+#define SET_BITS_TO_LE_1BYTE(__pstart, __bitoffset, __bitlen, __val) \
+ *((u8 *)(__pstart)) = EF1BYTE \
+ ( \
+ LE_BITS_CLEARED_TO_1BYTE(__pstart, __bitoffset, __bitlen) | \
+ ((((u8)__val) & BIT_LEN_MASK_8(__bitlen)) << (__bitoffset)) \
+ )
+
+/* Get the N-bytes aligment offset from the current length */
+#define N_BYTE_ALIGMENT(__value, __aligment) ((__aligment == 1) ? \
+ (__value) : (((__value + __aligment - 1) / __aligment) * __aligment))
+
+#endif /* __BASIC_TYPES_H__ */
diff --git a/drivers/staging/r8188eu/include/cmd_osdep.h b/drivers/staging/r8188eu/include/cmd_osdep.h
new file mode 100644
index 000000000000..5a8465e147b3
--- /dev/null
+++ b/drivers/staging/r8188eu/include/cmd_osdep.h
@@ -0,0 +1,32 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __CMD_OSDEP_H_
+#define __CMD_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+extern int _rtw_init_cmd_priv(struct cmd_priv *pcmdpriv);
+extern int _rtw_init_evt_priv(struct evt_priv *pevtpriv);
+extern void _rtw_free_cmd_priv(struct cmd_priv *pcmdpriv);
+extern int _rtw_enqueue_cmd(struct __queue *queue, struct cmd_obj *obj);
+extern struct cmd_obj *_rtw_dequeue_cmd(struct __queue *queue);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/drv_types.h b/drivers/staging/r8188eu/include/drv_types.h
new file mode 100644
index 000000000000..9aa72a91d467
--- /dev/null
+++ b/drivers/staging/r8188eu/include/drv_types.h
@@ -0,0 +1,346 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/*-----------------------------------------------------------------------------
+
+ For type defines and data structure defines
+
+------------------------------------------------------------------------------*/
+
+#ifndef __DRV_TYPES_H__
+#define __DRV_TYPES_H__
+
+#define DRV_NAME "r8188eu"
+#define CONFIG_88EU_AP_MODE 1
+#define CONFIG_88EU_P2P 1
+
+#include <osdep_service.h>
+#include <wlan_bssdef.h>
+#include <drv_types_linux.h>
+#include <rtw_ht.h>
+#include <rtw_cmd.h>
+#include <rtw_xmit.h>
+#include <rtw_recv.h>
+#include <hal_intf.h>
+#include <hal_com.h>
+#include <rtw_qos.h>
+#include <rtw_security.h>
+#include <rtw_pwrctrl.h>
+#include <rtw_io.h>
+#include <rtw_eeprom.h>
+#include <sta_info.h>
+#include <rtw_mlme.h>
+#include <rtw_debug.h>
+#include <rtw_rf.h>
+#include <rtw_event.h>
+#include <rtw_led.h>
+#include <rtw_mlme_ext.h>
+#include <rtw_p2p.h>
+#include <rtw_ap.h>
+#include <rtw_mp.h>
+#include <rtw_br_ext.h>
+
+enum _NIC_VERSION {
+ RTL8711_NIC,
+ RTL8712_NIC,
+ RTL8713_NIC,
+ RTL8716_NIC
+};
+
+#define SPEC_DEV_ID_NONE BIT(0)
+#define SPEC_DEV_ID_DISABLE_HT BIT(1)
+#define SPEC_DEV_ID_ENABLE_PS BIT(2)
+#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3)
+#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4)
+#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5)
+
+struct specific_device_id {
+ u32 flags;
+ u16 idVendor;
+ u16 idProduct;
+};
+
+struct registry_priv {
+ u8 chip_version;
+ u8 rfintfs;
+ u8 lbkmode;
+ u8 hci;
+ struct ndis_802_11_ssid ssid;
+ u8 network_mode; /* infra, ad-hoc, auto */
+ u8 channel;/* ad-hoc support requirement */
+ u8 wireless_mode;/* A, B, G, auto */
+ u8 scan_mode;/* active, passive */
+ u8 radio_enable;
+ u8 preamble;/* long, short, auto */
+ u8 vrtl_carrier_sense;/* Enable, Disable, Auto */
+ u8 vcs_type;/* RTS/CTS, CTS-to-self */
+ u16 rts_thresh;
+ u16 frag_thresh;
+ u8 adhoc_tx_pwr;
+ u8 soft_ap;
+ u8 power_mgnt;
+ u8 ips_mode;
+ u8 smart_ps;
+ u8 long_retry_lmt;
+ u8 short_retry_lmt;
+ u16 busy_thresh;
+ u8 ack_policy;
+ u8 mp_mode;
+ u8 software_encrypt;
+ u8 software_decrypt;
+ u8 acm_method;
+ /* UAPSD */
+ u8 wmm_enable;
+ u8 uapsd_enable;
+ u8 uapsd_max_sp;
+ u8 uapsd_acbk_en;
+ u8 uapsd_acbe_en;
+ u8 uapsd_acvi_en;
+ u8 uapsd_acvo_en;
+
+ u8 led_enable;
+
+ struct wlan_bssid_ex dev_network;
+
+ u8 ht_enable;
+ u8 cbw40_enable;
+ u8 ampdu_enable;/* for tx */
+ u8 rx_stbc;
+ u8 ampdu_amsdu;/* A-MPDU Supports A-MSDU is permitted */
+ u8 lowrate_two_xmit;
+
+ u8 rf_config;
+ u8 low_power;
+
+ u8 wifi_spec;/* !turbo_mode */
+
+ u8 channel_plan;
+ bool bAcceptAddbaReq;
+
+ u8 antdiv_cfg;
+ u8 antdiv_type;
+
+ u8 usbss_enable;/* 0:disable,1:enable */
+ u8 hwpdn_mode;/* 0:disable,1:enable,2:decide by EFUSE config */
+ u8 hwpwrp_detect;/* 0:disable,1:enable */
+
+ u8 hw_wps_pbc;/* 0:disable,1:enable */
+
+ u8 max_roaming_times; /* the max number driver will try */
+
+ u8 fw_iol; /* enable iol without other concern */
+
+ u8 enable80211d;
+
+ u8 ifname[16];
+ u8 if2name[16];
+
+ u8 notch_filter;
+};
+
+/* For registry parameters */
+#define RGTRY_OFT(field) ((u32)FIELD_OFFSET(struct registry_priv, field))
+#define RGTRY_SZ(field) sizeof(((struct registry_priv *)0)->field)
+#define BSSID_OFT(field) ((u32)FIELD_OFFSET(struct wlan_bssid_ex, field))
+#define BSSID_SZ(field) sizeof(((struct wlan_bssid_ex *)0)->field)
+
+#define MAX_CONTINUAL_URB_ERR 4
+
+struct rt_firmware {
+ u8 *szFwBuffer;
+ u32 ulFwLength;
+};
+
+struct dvobj_priv {
+ struct adapter *if1;
+ struct adapter *if2;
+
+ /* For 92D, DMDP have 2 interface. */
+ u8 InterfaceNumber;
+ u8 NumInterfaces;
+
+ /* In /Out Pipe information */
+ int RtInPipe[2];
+ int RtOutPipe[3];
+ u8 Queue2Pipe[HW_QUEUE_ENTRY];/* for out pipe mapping */
+
+ u8 irq_alloc;
+
+ struct rt_firmware firmware;
+
+/*-------- below is for USB INTERFACE --------*/
+
+ u8 nr_endpoint;
+ u8 ishighspeed;
+ u8 RtNumInPipes;
+ u8 RtNumOutPipes;
+ int ep_num[5]; /* endpoint number */
+ int RegUsbSS;
+ struct semaphore usb_suspend_sema;
+ struct mutex usb_vendor_req_mutex;
+
+ u8 *usb_alloc_vendor_req_buf;
+ u8 *usb_vendor_req_buf;
+
+ struct usb_interface *pusbintf;
+ struct usb_device *pusbdev;
+
+ ATOMIC_T continual_urb_error;
+ u8 signal_strength;
+};
+
+static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
+{
+ /* todo: get interface type from dvobj and the return
+ * the dev accordingly */
+ return &dvobj->pusbintf->dev;
+};
+
+enum _IFACE_TYPE {
+ IFACE_PORT0, /* mapping to port0 for C/D series chips */
+ IFACE_PORT1, /* mapping to port1 for C/D series chip */
+ MAX_IFACE_PORT,
+};
+
+enum _ADAPTER_TYPE {
+ PRIMARY_ADAPTER,
+ SECONDARY_ADAPTER,
+ MAX_ADAPTER,
+};
+
+enum driver_state {
+ DRIVER_NORMAL = 0,
+ DRIVER_DISAPPEAR = 1,
+ DRIVER_REPLACE_DONGLE = 2,
+};
+
+struct adapter {
+ int DriverState;/* for disable driver using module, use dongle toi
+ * replace module. */
+ int pid[3];/* process id from UI, 0:wps, 1:hostapd, 2:dhcpcd */
+ int bDongle;/* build-in module or external dongle */
+ u16 chip_type;
+ u16 HardwareType;
+ u16 interface_type;/* USB,SDIO,SPI,PCI */
+
+ struct dvobj_priv *dvobj;
+ struct mlme_priv mlmepriv;
+ struct mlme_ext_priv mlmeextpriv;
+ struct cmd_priv cmdpriv;
+ struct evt_priv evtpriv;
+ struct io_priv iopriv;
+ struct xmit_priv xmitpriv;
+ struct recv_priv recvpriv;
+ struct sta_priv stapriv;
+ struct security_priv securitypriv;
+ struct registry_priv registrypriv;
+ struct pwrctrl_priv pwrctrlpriv;
+ struct eeprom_priv eeprompriv;
+ struct led_priv ledpriv;
+ struct mp_priv mppriv;
+
+#ifdef CONFIG_88EU_AP_MODE
+ struct hostapd_priv *phostapdpriv;
+#endif
+
+ struct wifidirect_info wdinfo;
+
+ void *HalData;
+ u32 hal_data_sz;
+ struct hal_ops HalFunc;
+
+ s32 bDriverStopped;
+ s32 bSurpriseRemoved;
+ s32 bCardDisableWOHSM;
+
+ u32 IsrContent;
+ u32 ImrContent;
+
+ u8 EepromAddressSize;
+ u8 hw_init_completed;
+ u8 bDriverIsGoingToUnload;
+ u8 init_adpt_in_progress;
+ u8 bHaltInProgress;
+ s8 signal_strength;
+
+ void *cmdThread;
+ void *evtThread;
+ void *xmitThread;
+ void *recvThread;
+ void (*intf_start)(struct adapter *adapter);
+ void (*intf_stop)(struct adapter *adapter);
+ struct net_device *pnetdev;
+
+ /* used by rtw_rereg_nd_name related function */
+ struct rereg_nd_name_data {
+ struct net_device *old_pnetdev;
+ char old_ifname[IFNAMSIZ];
+ u8 old_ips_mode;
+ u8 old_bRegUseLed;
+ } rereg_nd_name_priv;
+
+ int bup;
+ struct net_device_stats stats;
+ struct iw_statistics iwstats;
+ struct proc_dir_entry *dir_dev;/* for proc directory */
+
+ int net_closed;
+ u8 bFWReady;
+ u8 bBTFWReady;
+ u8 bReadPortCancel;
+ u8 bWritePortCancel;
+ u8 bRxRSSIDisplay;
+ /* The driver will show up the desired channel number
+ * when this flag is 1. */
+ u8 bNotifyChannelChange;
+#ifdef CONFIG_88EU_P2P
+ /* The driver will show the current P2P status when the
+ * upper application reads it. */
+ u8 bShowGetP2PState;
+#endif
+ struct adapter *pbuddy_adapter;
+
+ struct mutex *hw_init_mutex;
+
+ spinlock_t br_ext_lock;
+ struct nat25_network_db_entry *nethash[NAT25_HASH_SIZE];
+ int pppoe_connection_in_progress;
+ unsigned char pppoe_addr[MACADDRLEN];
+ unsigned char scdb_mac[MACADDRLEN];
+ unsigned char scdb_ip[4];
+ struct nat25_network_db_entry *scdb_entry;
+ unsigned char br_mac[MACADDRLEN];
+ unsigned char br_ip[4];
+ struct br_ext_info ethBrExtInfo;
+
+ u8 fix_rate;
+
+ unsigned char in_cta_test;
+};
+
+#define adapter_to_dvobj(adapter) (adapter->dvobj)
+
+int rtw_handle_dualmac(struct adapter *adapter, bool init);
+
+static inline u8 *myid(struct eeprom_priv *peepriv)
+{
+ return peepriv->mac_addr;
+}
+
+#endif /* __DRV_TYPES_H__ */
diff --git a/drivers/staging/r8188eu/include/drv_types_linux.h b/drivers/staging/r8188eu/include/drv_types_linux.h
new file mode 100644
index 000000000000..f5db1dd14317
--- /dev/null
+++ b/drivers/staging/r8188eu/include/drv_types_linux.h
@@ -0,0 +1,23 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __DRV_TYPES_LINUX_H__
+#define __DRV_TYPES_LINUX_H__
+
+#endif
diff --git a/drivers/staging/r8188eu/include/ethernet.h b/drivers/staging/r8188eu/include/ethernet.h
new file mode 100644
index 000000000000..5b17dcf143a4
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ethernet.h
@@ -0,0 +1,41 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/*! \file */
+#ifndef __INC_ETHERNET_H
+#define __INC_ETHERNET_H
+
+#define ETHERNET_ADDRESS_LENGTH 6 /* Ethernet Address Length */
+#define ETHERNET_HEADER_SIZE 14 /* Ethernet Header Length */
+#define LLC_HEADER_SIZE 6 /* LLC Header Length */
+#define TYPE_LENGTH_FIELD_SIZE 2 /* Type/Length Size */
+#define MINIMUM_ETHERNET_PACKET_SIZE 60 /* Min Ethernet Packet Size */
+#define MAXIMUM_ETHERNET_PACKET_SIZE 1514 /* Max Ethernet Packet Size */
+
+/* Is Multicast Address? */
+#define RT_ETH_IS_MULTICAST(_addr) ((((u8 *)(_addr))[0]&0x01) != 0)
+#define RT_ETH_IS_BROADCAST(_addr) ( \
+ ((u8 *)(_addr))[0] == 0xff && \
+ ((u8 *)(_addr))[1] == 0xff && \
+ ((u8 *)(_addr))[2] == 0xff && \
+ ((u8 *)(_addr))[3] == 0xff && \
+ ((u8 *)(_addr))[4] == 0xff && \
+ ((u8 *)(_addr))[5] == 0xff) /* Is Broadcast Address? */
+
+#endif /* #ifndef __INC_ETHERNET_H */
diff --git a/drivers/staging/r8188eu/include/h2clbk.h b/drivers/staging/r8188eu/include/h2clbk.h
new file mode 100644
index 000000000000..72b67827bc6e
--- /dev/null
+++ b/drivers/staging/r8188eu/include/h2clbk.h
@@ -0,0 +1,32 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#define _H2CLBK_H_
+
+#include <rtl8711_spec.h>
+#include <TypeDef.h>
+
+void _lbk_cmd(struct adapter *adapter);
+
+void _lbk_rsp(struct adapter *adapter);
+
+void _lbk_evt(IN struct adapter *adapter);
+
+void h2c_event_callback(unsigned char *dev, unsigned char *pbuf);
diff --git a/drivers/staging/r8188eu/include/hal_com.h b/drivers/staging/r8188eu/include/hal_com.h
new file mode 100644
index 000000000000..652f645d54ff
--- /dev/null
+++ b/drivers/staging/r8188eu/include/hal_com.h
@@ -0,0 +1,172 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HAL_COMMON_H__
+#define __HAL_COMMON_H__
+
+/* */
+/* Rate Definition */
+/* */
+/* CCK */
+#define RATR_1M 0x00000001
+#define RATR_2M 0x00000002
+#define RATR_55M 0x00000004
+#define RATR_11M 0x00000008
+/* OFDM */
+#define RATR_6M 0x00000010
+#define RATR_9M 0x00000020
+#define RATR_12M 0x00000040
+#define RATR_18M 0x00000080
+#define RATR_24M 0x00000100
+#define RATR_36M 0x00000200
+#define RATR_48M 0x00000400
+#define RATR_54M 0x00000800
+/* MCS 1 Spatial Stream */
+#define RATR_MCS0 0x00001000
+#define RATR_MCS1 0x00002000
+#define RATR_MCS2 0x00004000
+#define RATR_MCS3 0x00008000
+#define RATR_MCS4 0x00010000
+#define RATR_MCS5 0x00020000
+#define RATR_MCS6 0x00040000
+#define RATR_MCS7 0x00080000
+/* MCS 2 Spatial Stream */
+#define RATR_MCS8 0x00100000
+#define RATR_MCS9 0x00200000
+#define RATR_MCS10 0x00400000
+#define RATR_MCS11 0x00800000
+#define RATR_MCS12 0x01000000
+#define RATR_MCS13 0x02000000
+#define RATR_MCS14 0x04000000
+#define RATR_MCS15 0x08000000
+
+/* CCK */
+#define RATE_1M BIT(0)
+#define RATE_2M BIT(1)
+#define RATE_5_5M BIT(2)
+#define RATE_11M BIT(3)
+/* OFDM */
+#define RATE_6M BIT(4)
+#define RATE_9M BIT(5)
+#define RATE_12M BIT(6)
+#define RATE_18M BIT(7)
+#define RATE_24M BIT(8)
+#define RATE_36M BIT(9)
+#define RATE_48M BIT(10)
+#define RATE_54M BIT(11)
+/* MCS 1 Spatial Stream */
+#define RATE_MCS0 BIT(12)
+#define RATE_MCS1 BIT(13)
+#define RATE_MCS2 BIT(14)
+#define RATE_MCS3 BIT(15)
+#define RATE_MCS4 BIT(16)
+#define RATE_MCS5 BIT(17)
+#define RATE_MCS6 BIT(18)
+#define RATE_MCS7 BIT(19)
+/* MCS 2 Spatial Stream */
+#define RATE_MCS8 BIT(20)
+#define RATE_MCS9 BIT(21)
+#define RATE_MCS10 BIT(22)
+#define RATE_MCS11 BIT(23)
+#define RATE_MCS12 BIT(24)
+#define RATE_MCS13 BIT(25)
+#define RATE_MCS14 BIT(26)
+#define RATE_MCS15 BIT(27)
+
+/* ALL CCK Rate */
+#define RATE_ALL_CCK (RATR_1M | RATR_2M | RATR_55M | RATR_11M)
+#define RATE_ALL_OFDM_AG (RATR_6M | RATR_9M | RATR_12M | RATR_18M | \
+ RATR_24M | RATR_36M | RATR_48M | RATR_54M)
+#define RATE_ALL_OFDM_1SS (RATR_MCS0 | RATR_MCS1 | RATR_MCS2 | \
+ RATR_MCS3 | RATR_MCS4 | RATR_MCS5|RATR_MCS6 | \
+ RATR_MCS7)
+#define RATE_ALL_OFDM_2SS (RATR_MCS8 | RATR_MCS9 | RATR_MCS10 | \
+ RATR_MCS11 | RATR_MCS12 | RATR_MCS13 | \
+ RATR_MCS14 | RATR_MCS15)
+
+/*------------------------------ Tx Desc definition Macro --------------------*/
+/* pragma mark -- Tx Desc related definition. -- */
+/* Rate */
+/* CCK Rates, TxHT = 0 */
+#define DESC_RATE1M 0x00
+#define DESC_RATE2M 0x01
+#define DESC_RATE5_5M 0x02
+#define DESC_RATE11M 0x03
+
+/* OFDM Rates, TxHT = 0 */
+#define DESC_RATE6M 0x04
+#define DESC_RATE9M 0x05
+#define DESC_RATE12M 0x06
+#define DESC_RATE18M 0x07
+#define DESC_RATE24M 0x08
+#define DESC_RATE36M 0x09
+#define DESC_RATE48M 0x0a
+#define DESC_RATE54M 0x0b
+
+/* MCS Rates, TxHT = 1 */
+#define DESC_RATEMCS0 0x0c
+#define DESC_RATEMCS1 0x0d
+#define DESC_RATEMCS2 0x0e
+#define DESC_RATEMCS3 0x0f
+#define DESC_RATEMCS4 0x10
+#define DESC_RATEMCS5 0x11
+#define DESC_RATEMCS6 0x12
+#define DESC_RATEMCS7 0x13
+#define DESC_RATEMCS8 0x14
+#define DESC_RATEMCS9 0x15
+#define DESC_RATEMCS10 0x16
+#define DESC_RATEMCS11 0x17
+#define DESC_RATEMCS12 0x18
+#define DESC_RATEMCS13 0x19
+#define DESC_RATEMCS14 0x1a
+#define DESC_RATEMCS15 0x1b
+#define DESC_RATEMCS15_SG 0x1c
+#define DESC_RATEMCS32 0x20
+
+/* 1 Byte long (in unit of TU) */
+#define REG_P2P_CTWIN 0x0572
+#define REG_NOA_DESC_SEL 0x05CF
+#define REG_NOA_DESC_DURATION 0x05E0
+#define REG_NOA_DESC_INTERVAL 0x05E4
+#define REG_NOA_DESC_START 0x05E8
+#define REG_NOA_DESC_COUNT 0x05EC
+
+#include "HalVerDef.h"
+void dump_chip_info(struct HAL_VERSION ChipVersion);
+
+/* return the final channel plan decision */
+u8 hal_com_get_channel_plan(struct adapter *padapter,
+ u8 hw_channel_plan,
+ u8 sw_channel_plan,
+ u8 def_channel_plan,
+ bool AutoLoadFail
+);
+
+u8 MRateToHwRate(u8 rate);
+
+void HalSetBrateCfg(struct adapter *Adapter, u8 *mBratesOS, u16 *pBrateCfg);
+
+bool Hal_MappingOutPipe(struct adapter *pAdapter, u8 NumOutPipe);
+
+void hal_init_macaddr(struct adapter *adapter);
+
+void c2h_evt_clear(struct adapter *adapter);
+s32 c2h_evt_read(struct adapter *adapter, u8 *buf);
+
+#endif /* __HAL_COMMON_H__ */
diff --git a/drivers/staging/r8188eu/include/hal_intf.h b/drivers/staging/r8188eu/include/hal_intf.h
new file mode 100644
index 000000000000..49539b862863
--- /dev/null
+++ b/drivers/staging/r8188eu/include/hal_intf.h
@@ -0,0 +1,430 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HAL_INTF_H__
+#define __HAL_INTF_H__
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <Hal8188EPhyCfg.h>
+
+enum RTL871X_HCI_TYPE {
+ RTW_PCIE = BIT0,
+ RTW_USB = BIT1,
+ RTW_SDIO = BIT2,
+ RTW_GSPI = BIT3,
+};
+
+enum _CHIP_TYPE {
+ NULL_CHIP_TYPE,
+ RTL8712_8188S_8191S_8192S,
+ RTL8188C_8192C,
+ RTL8192D,
+ RTL8723A,
+ RTL8188E,
+ MAX_CHIP_TYPE
+};
+
+enum hw_variables {
+ HW_VAR_MEDIA_STATUS,
+ HW_VAR_MEDIA_STATUS1,
+ HW_VAR_SET_OPMODE,
+ HW_VAR_MAC_ADDR,
+ HW_VAR_BSSID,
+ HW_VAR_INIT_RTS_RATE,
+ HW_VAR_BASIC_RATE,
+ HW_VAR_TXPAUSE,
+ HW_VAR_BCN_FUNC,
+ HW_VAR_CORRECT_TSF,
+ HW_VAR_CHECK_BSSID,
+ HW_VAR_MLME_DISCONNECT,
+ HW_VAR_MLME_SITESURVEY,
+ HW_VAR_MLME_JOIN,
+ HW_VAR_BEACON_INTERVAL,
+ HW_VAR_SLOT_TIME,
+ HW_VAR_RESP_SIFS,
+ HW_VAR_ACK_PREAMBLE,
+ HW_VAR_SEC_CFG,
+ HW_VAR_BCN_VALID,
+ HW_VAR_RF_TYPE,
+ HW_VAR_DM_FLAG,
+ HW_VAR_DM_FUNC_OP,
+ HW_VAR_DM_FUNC_SET,
+ HW_VAR_DM_FUNC_CLR,
+ HW_VAR_CAM_EMPTY_ENTRY,
+ HW_VAR_CAM_INVALID_ALL,
+ HW_VAR_CAM_WRITE,
+ HW_VAR_CAM_READ,
+ HW_VAR_AC_PARAM_VO,
+ HW_VAR_AC_PARAM_VI,
+ HW_VAR_AC_PARAM_BE,
+ HW_VAR_AC_PARAM_BK,
+ HW_VAR_ACM_CTRL,
+ HW_VAR_AMPDU_MIN_SPACE,
+ HW_VAR_AMPDU_FACTOR,
+ HW_VAR_RXDMA_AGG_PG_TH,
+ HW_VAR_SET_RPWM,
+ HW_VAR_H2C_FW_PWRMODE,
+ HW_VAR_H2C_FW_JOINBSSRPT,
+ HW_VAR_FWLPS_RF_ON,
+ HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
+ HW_VAR_TDLS_WRCR,
+ HW_VAR_TDLS_INIT_CH_SEN,
+ HW_VAR_TDLS_RS_RCR,
+ HW_VAR_TDLS_DONE_CH_SEN,
+ HW_VAR_INITIAL_GAIN,
+ HW_VAR_TRIGGER_GPIO_0,
+ HW_VAR_BT_SET_COEXIST,
+ HW_VAR_BT_ISSUE_DELBA,
+ HW_VAR_CURRENT_ANTENNA,
+ HW_VAR_ANTENNA_DIVERSITY_LINK,
+ HW_VAR_ANTENNA_DIVERSITY_SELECT,
+ HW_VAR_SWITCH_EPHY_WoWLAN,
+ HW_VAR_EFUSE_USAGE,
+ HW_VAR_EFUSE_BYTES,
+ HW_VAR_EFUSE_BT_USAGE,
+ HW_VAR_EFUSE_BT_BYTES,
+ HW_VAR_FIFO_CLEARN_UP,
+ HW_VAR_CHECK_TXBUF,
+ HW_VAR_APFM_ON_MAC, /* Auto FSM to Turn On, include clock, isolation,
+ * power control for MAC only */
+ /* The valid upper nav range for the HW updating, if the true value is
+ * larger than the upper range, the HW won't update it. */
+ /* Unit in microsecond. 0 means disable this function. */
+ HW_VAR_NAV_UPPER,
+ HW_VAR_RPT_TIMER_SETTING,
+ HW_VAR_TX_RPT_MAX_MACID,
+ HW_VAR_H2C_MEDIA_STATUS_RPT,
+ HW_VAR_CHK_HI_QUEUE_EMPTY,
+};
+
+enum hal_def_variable {
+ HAL_DEF_UNDERCORATEDSMOOTHEDPWDB,
+ HAL_DEF_IS_SUPPORT_ANT_DIV,
+ HAL_DEF_CURRENT_ANTENNA,
+ HAL_DEF_DRVINFO_SZ,
+ HAL_DEF_MAX_RECVBUF_SZ,
+ HAL_DEF_RX_PACKET_OFFSET,
+ HAL_DEF_DBG_DUMP_RXPKT,/* for dbg */
+ HAL_DEF_DBG_DM_FUNC,/* for dbg */
+ HAL_DEF_RA_DECISION_RATE,
+ HAL_DEF_RA_SGI,
+ HAL_DEF_PT_PWR_STATUS,
+ HW_VAR_MAX_RX_AMPDU_FACTOR,
+ HW_DEF_RA_INFO_DUMP,
+ HAL_DEF_DBG_DUMP_TXPKT,
+ HW_DEF_FA_CNT_DUMP,
+ HW_DEF_ODM_DBG_FLAG,
+};
+
+enum hal_odm_variable {
+ HAL_ODM_STA_INFO,
+ HAL_ODM_P2P_STATE,
+ HAL_ODM_WIFI_DISPLAY_STATE,
+};
+
+enum hal_intf_ps_func {
+ HAL_USB_SELECT_SUSPEND,
+ HAL_MAX_ID,
+};
+
+typedef s32 (*c2h_id_filter)(u8 id);
+
+struct hal_ops {
+ u32 (*hal_power_on)(struct adapter *padapter);
+ u32 (*hal_init)(struct adapter *padapter);
+ u32 (*hal_deinit)(struct adapter *padapter);
+
+ void (*free_hal_data)(struct adapter *padapter);
+
+ u32 (*inirp_init)(struct adapter *padapter);
+ u32 (*inirp_deinit)(struct adapter *padapter);
+
+ s32 (*init_xmit_priv)(struct adapter *padapter);
+ void (*free_xmit_priv)(struct adapter *padapter);
+
+ s32 (*init_recv_priv)(struct adapter *padapter);
+ void (*free_recv_priv)(struct adapter *padapter);
+
+ void (*InitSwLeds)(struct adapter *padapter);
+ void (*DeInitSwLeds)(struct adapter *padapter);
+
+ void (*dm_init)(struct adapter *padapter);
+ void (*dm_deinit)(struct adapter *padapter);
+ void (*read_chip_version)(struct adapter *padapter);
+
+ void (*init_default_value)(struct adapter *padapter);
+
+ void (*intf_chip_configure)(struct adapter *padapter);
+
+ void (*read_adapter_info)(struct adapter *padapter);
+
+ void (*enable_interrupt)(struct adapter *padapter);
+ void (*disable_interrupt)(struct adapter *padapter);
+ s32 (*interrupt_handler)(struct adapter *padapter);
+
+ void (*set_bwmode_handler)(struct adapter *padapter,
+ enum ht_channel_width Bandwidth,
+ u8 Offset);
+ void (*set_channel_handler)(struct adapter *padapter, u8 channel);
+
+ void (*hal_dm_watchdog)(struct adapter *padapter);
+
+ void (*SetHwRegHandler)(struct adapter *padapter, u8 variable,
+ u8 *val);
+ void (*GetHwRegHandler)(struct adapter *padapter, u8 variable,
+ u8 *val);
+
+ u8 (*GetHalDefVarHandler)(struct adapter *padapter,
+ enum hal_def_variable eVariable,
+ void *pValue);
+ u8 (*SetHalDefVarHandler)(struct adapter *padapter,
+ enum hal_def_variable eVariable,
+ void *pValue);
+
+ void (*GetHalODMVarHandler)(struct adapter *padapter,
+ enum hal_odm_variable eVariable,
+ void *pValue1, bool bSet);
+ void (*SetHalODMVarHandler)(struct adapter *padapter,
+ enum hal_odm_variable eVariable,
+ void *pValue1, bool bSet);
+
+ void (*UpdateRAMaskHandler)(struct adapter *padapter,
+ u32 mac_id, u8 rssi_level);
+ void (*SetBeaconRelatedRegistersHandler)(struct adapter *padapter);
+
+ void (*Add_RateATid)(struct adapter *adapter, u32 bitmap, u8 arg,
+ u8 rssi_level);
+ void (*run_thread)(struct adapter *adapter);
+ void (*cancel_thread)(struct adapter *adapter);
+
+ u8 (*AntDivBeforeLinkHandler)(struct adapter *adapter);
+ void (*AntDivCompareHandler)(struct adapter *adapter,
+ struct wlan_bssid_ex *dst,
+ struct wlan_bssid_ex *src);
+ u8 (*interface_ps_func)(struct adapter *padapter,
+ enum hal_intf_ps_func efunc_id, u8 *val);
+
+ s32 (*hal_xmit)(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+ s32 (*mgnt_xmit)(struct adapter *padapter,
+ struct xmit_frame *pmgntframe);
+ s32 (*hal_xmitframe_enqueue)(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+
+ u32 (*read_bbreg)(struct adapter *padapter, u32 RegAddr,
+ u32 BitMask);
+ void (*write_bbreg)(struct adapter *padapter, u32 RegAddr,
+ u32 BitMask, u32 Data);
+ u32 (*read_rfreg)(struct adapter *padapter,
+ enum rf_radio_path eRFPath, u32 RegAddr,
+ u32 BitMask);
+ void (*write_rfreg)(struct adapter *padapter,
+ enum rf_radio_path eRFPath, u32 RegAddr,
+ u32 BitMask, u32 Data);
+
+ void (*EfusePowerSwitch)(struct adapter *padapter, u8 bWrite,
+ u8 PwrState);
+ void (*ReadEFuse)(struct adapter *padapter, u8 efuseType, u16 _offset,
+ u16 _size_byte, u8 *pbuf, bool bPseudoTest);
+ void (*EFUSEGetEfuseDefinition)(struct adapter *padapter, u8 efuseType,
+ u8 type, void *pOut, bool bPseudoTest);
+ u16 (*EfuseGetCurrentSize)(struct adapter *padapter, u8 efuseType,
+ bool bPseudoTest);
+ int (*Efuse_PgPacketRead)(struct adapter *adapter, u8 offset,
+ u8 *data, bool bPseudoTest);
+ int (*Efuse_PgPacketWrite)(struct adapter *padapter, u8 offset,
+ u8 word_en, u8 *data, bool bPseudoTest);
+ u8 (*Efuse_WordEnableDataWrite)(struct adapter *padapter,
+ u16 efuse_addr, u8 word_en,
+ u8 *data, bool bPseudoTest);
+ bool (*Efuse_PgPacketWrite_BT)(struct adapter *padapter, u8 offset,
+ u8 word_en, u8 *data, bool test);
+
+ void (*sreset_init_value)(struct adapter *padapter);
+ void (*sreset_reset_value)(struct adapter *padapter);
+ void (*silentreset)(struct adapter *padapter);
+ void (*sreset_xmit_status_check)(struct adapter *padapter);
+ void (*sreset_linked_status_check) (struct adapter *padapter);
+ u8 (*sreset_get_wifi_status)(struct adapter *padapter);
+
+ int (*IOL_exec_cmds_sync)(struct adapter *padapter,
+ struct xmit_frame *frame, u32 max_wait,
+ u32 bndy_cnt);
+
+ void (*hal_notch_filter)(struct adapter *adapter, bool enable);
+ void (*hal_reset_security_engine)(struct adapter *adapter);
+ s32 (*c2h_handler)(struct adapter *padapter,
+ struct c2h_evt_hdr *c2h_evt);
+ c2h_id_filter c2h_id_filter_ccx;
+};
+
+enum rt_eeprom_type {
+ EEPROM_93C46,
+ EEPROM_93C56,
+ EEPROM_BOOT_EFUSE,
+};
+
+#define RF_CHANGE_BY_INIT 0
+#define RF_CHANGE_BY_IPS BIT28
+#define RF_CHANGE_BY_PS BIT29
+#define RF_CHANGE_BY_HW BIT30
+#define RF_CHANGE_BY_SW BIT31
+
+enum hardware_type {
+ HARDWARE_TYPE_RTL8180,
+ HARDWARE_TYPE_RTL8185,
+ HARDWARE_TYPE_RTL8187,
+ HARDWARE_TYPE_RTL8188,
+ HARDWARE_TYPE_RTL8190P,
+ HARDWARE_TYPE_RTL8192E,
+ HARDWARE_TYPE_RTL819xU,
+ HARDWARE_TYPE_RTL8192SE,
+ HARDWARE_TYPE_RTL8192SU,
+ HARDWARE_TYPE_RTL8192CE,
+ HARDWARE_TYPE_RTL8192CU,
+ HARDWARE_TYPE_RTL8192DE,
+ HARDWARE_TYPE_RTL8192DU,
+ HARDWARE_TYPE_RTL8723AE,
+ HARDWARE_TYPE_RTL8723AU,
+ HARDWARE_TYPE_RTL8723AS,
+ HARDWARE_TYPE_RTL8188EE,
+ HARDWARE_TYPE_RTL8188EU,
+ HARDWARE_TYPE_RTL8188ES,
+ HARDWARE_TYPE_MAX,
+};
+
+/* RTL8188E Series */
+#define IS_HARDWARE_TYPE_8188EE(_Adapter) \
+(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EE)
+#define IS_HARDWARE_TYPE_8188EU(_Adapter) \
+(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EU)
+#define IS_HARDWARE_TYPE_8188ES(_Adapter) \
+(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188ES)
+#define IS_HARDWARE_TYPE_8188E(_Adapter) \
+(IS_HARDWARE_TYPE_8188EE(_Adapter) || IS_HARDWARE_TYPE_8188EU(_Adapter) || \
+ IS_HARDWARE_TYPE_8188ES(_Adapter))
+
+#define GET_EEPROM_EFUSE_PRIV(adapter) (&adapter->eeprompriv)
+
+#define is_boot_from_eeprom(adapter) (adapter->eeprompriv.EepromOrEfuse)
+
+void rtw_hal_def_value_init(struct adapter *padapter);
+
+void rtw_hal_free_data(struct adapter *padapter);
+
+void rtw_hal_dm_init(struct adapter *padapter);
+void rtw_hal_dm_deinit(struct adapter *padapter);
+void rtw_hal_sw_led_init(struct adapter *padapter);
+void rtw_hal_sw_led_deinit(struct adapter *padapter);
+
+u32 rtw_hal_power_on(struct adapter *padapter);
+uint rtw_hal_init(struct adapter *padapter);
+uint rtw_hal_deinit(struct adapter *padapter);
+void rtw_hal_stop(struct adapter *padapter);
+void rtw_hal_set_hwreg(struct adapter *padapter, u8 variable, u8 *val);
+void rtw_hal_get_hwreg(struct adapter *padapter, u8 variable, u8 *val);
+
+void rtw_hal_chip_configure(struct adapter *padapter);
+void rtw_hal_read_chip_info(struct adapter *padapter);
+void rtw_hal_read_chip_version(struct adapter *padapter);
+
+u8 rtw_hal_set_def_var(struct adapter *padapter,
+ enum hal_def_variable eVariable, void *pValue);
+u8 rtw_hal_get_def_var(struct adapter *padapter,
+ enum hal_def_variable eVariable, void *pValue);
+
+void rtw_hal_set_odm_var(struct adapter *padapter,
+ enum hal_odm_variable eVariable, void *pValue1,
+ bool bSet);
+void rtw_hal_get_odm_var(struct adapter *padapter,
+ enum hal_odm_variable eVariable,
+ void *pValue1, bool bSet);
+
+void rtw_hal_enable_interrupt(struct adapter *padapter);
+void rtw_hal_disable_interrupt(struct adapter *padapter);
+
+u32 rtw_hal_inirp_init(struct adapter *padapter);
+u32 rtw_hal_inirp_deinit(struct adapter *padapter);
+
+u8 rtw_hal_intf_ps_func(struct adapter *padapter,
+ enum hal_intf_ps_func efunc_id, u8 *val);
+s32 rtw_hal_xmitframe_enqueue(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+
+s32 rtw_hal_xmit(struct adapter *padapter, struct xmit_frame *pxmitframe);
+s32 rtw_hal_mgnt_xmit(struct adapter *padapter,
+ struct xmit_frame *pmgntframe);
+
+s32 rtw_hal_init_xmit_priv(struct adapter *padapter);
+void rtw_hal_free_xmit_priv(struct adapter *padapter);
+
+s32 rtw_hal_init_recv_priv(struct adapter *padapter);
+void rtw_hal_free_recv_priv(struct adapter *padapter);
+
+void rtw_hal_update_ra_mask(struct adapter *padapter, u32 mac_id, u8 level);
+void rtw_hal_add_ra_tid(struct adapter *adapt, u32 bitmap, u8 arg, u8 level);
+void rtw_hal_clone_data(struct adapter *dst_adapt,
+ struct adapter *src_adapt);
+void rtw_hal_start_thread(struct adapter *padapter);
+void rtw_hal_stop_thread(struct adapter *padapter);
+
+void rtw_hal_bcn_related_reg_setting(struct adapter *padapter);
+
+u32 rtw_hal_read_bbreg(struct adapter *padapter, u32 RegAddr, u32 BitMask);
+void rtw_hal_write_bbreg(struct adapter *padapter, u32 RegAddr, u32 BitMask,
+ u32 Data);
+u32 rtw_hal_read_rfreg(struct adapter *padapter, enum rf_radio_path eRFPath,
+ u32 RegAddr, u32 BitMask);
+void rtw_hal_write_rfreg(struct adapter *padapter,
+ enum rf_radio_path eRFPath, u32 RegAddr,
+ u32 BitMask, u32 Data);
+
+s32 rtw_hal_interrupt_handler(struct adapter *padapter);
+
+void rtw_hal_set_bwmode(struct adapter *padapter,
+ enum ht_channel_width Bandwidth, u8 Offset);
+void rtw_hal_set_chan(struct adapter *padapter, u8 channel);
+void rtw_hal_dm_watchdog(struct adapter *padapter);
+
+u8 rtw_hal_antdiv_before_linked(struct adapter *padapter);
+void rtw_hal_antdiv_rssi_compared(struct adapter *padapter,
+ struct wlan_bssid_ex *dst,
+ struct wlan_bssid_ex *src);
+
+void rtw_hal_sreset_init(struct adapter *padapter);
+void rtw_hal_sreset_reset(struct adapter *padapter);
+void rtw_hal_sreset_reset_value(struct adapter *padapter);
+void rtw_hal_sreset_xmit_status_check(struct adapter *padapter);
+void rtw_hal_sreset_linked_status_check(struct adapter *padapter);
+u8 rtw_hal_sreset_get_wifi_status(struct adapter *padapter);
+
+int rtw_hal_iol_cmd(struct adapter *adapter, struct xmit_frame *xmit_frame,
+ u32 max_wating_ms, u32 bndy_cnt);
+
+void rtw_hal_notch_filter(struct adapter *adapter, bool enable);
+void rtw_hal_reset_security_engine(struct adapter *adapter);
+
+s32 rtw_hal_c2h_handler(struct adapter *adapter,
+ struct c2h_evt_hdr *c2h_evt);
+c2h_id_filter rtw_hal_c2h_id_filter_ccx(struct adapter *adapter);
+void indicate_wx_scan_complete_event(struct adapter *padapter);
+u8 rtw_do_join(struct adapter *padapter);
+
+#endif /* __HAL_INTF_H__ */
diff --git a/drivers/staging/r8188eu/include/ieee80211.h b/drivers/staging/r8188eu/include/ieee80211.h
new file mode 100644
index 000000000000..0e6beaebeb0f
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ieee80211.h
@@ -0,0 +1,1261 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IEEE80211_H
+#define __IEEE80211_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include "wifi.h"
+#include <linux/wireless.h>
+
+#define MGMT_QUEUE_NUM 5
+
+#define ETH_ALEN 6
+#define ETH_TYPE_LEN 2
+#define PAYLOAD_TYPE_LEN 1
+
+#ifdef CONFIG_88EU_AP_MODE
+
+#define RTL_IOCTL_HOSTAPD (SIOCIWFIRSTPRIV + 28)
+
+/* RTL871X_IOCTL_HOSTAPD ioctl() cmd: */
+enum {
+ RTL871X_HOSTAPD_FLUSH = 1,
+ RTL871X_HOSTAPD_ADD_STA = 2,
+ RTL871X_HOSTAPD_REMOVE_STA = 3,
+ RTL871X_HOSTAPD_GET_INFO_STA = 4,
+ /* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */
+ RTL871X_HOSTAPD_GET_WPAIE_STA = 5,
+ RTL871X_SET_ENCRYPTION = 6,
+ RTL871X_GET_ENCRYPTION = 7,
+ RTL871X_HOSTAPD_SET_FLAGS_STA = 8,
+ RTL871X_HOSTAPD_GET_RID = 9,
+ RTL871X_HOSTAPD_SET_RID = 10,
+ RTL871X_HOSTAPD_SET_ASSOC_AP_ADDR = 11,
+ RTL871X_HOSTAPD_SET_GENERIC_ELEMENT = 12,
+ RTL871X_HOSTAPD_MLME = 13,
+ RTL871X_HOSTAPD_SCAN_REQ = 14,
+ RTL871X_HOSTAPD_STA_CLEAR_STATS = 15,
+ RTL871X_HOSTAPD_SET_BEACON = 16,
+ RTL871X_HOSTAPD_SET_WPS_BEACON = 17,
+ RTL871X_HOSTAPD_SET_WPS_PROBE_RESP = 18,
+ RTL871X_HOSTAPD_SET_WPS_ASSOC_RESP = 19,
+ RTL871X_HOSTAPD_SET_HIDDEN_SSID = 20,
+ RTL871X_HOSTAPD_SET_MACADDR_ACL = 21,
+ RTL871X_HOSTAPD_ACL_ADD_STA = 22,
+ RTL871X_HOSTAPD_ACL_REMOVE_STA = 23,
+};
+
+/* STA flags */
+#define WLAN_STA_AUTH BIT(0)
+#define WLAN_STA_ASSOC BIT(1)
+#define WLAN_STA_PS BIT(2)
+#define WLAN_STA_TIM BIT(3)
+#define WLAN_STA_PERM BIT(4)
+#define WLAN_STA_AUTHORIZED BIT(5)
+#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */
+#define WLAN_STA_SHORT_PREAMBLE BIT(7)
+#define WLAN_STA_PREAUTH BIT(8)
+#define WLAN_STA_WME BIT(9)
+#define WLAN_STA_MFP BIT(10)
+#define WLAN_STA_HT BIT(11)
+#define WLAN_STA_WPS BIT(12)
+#define WLAN_STA_MAYBE_WPS BIT(13)
+#define WLAN_STA_NONERP BIT(31)
+
+#endif
+
+#define IEEE_CMD_SET_WPA_PARAM 1
+#define IEEE_CMD_SET_WPA_IE 2
+#define IEEE_CMD_SET_ENCRYPTION 3
+#define IEEE_CMD_MLME 4
+
+#define IEEE_PARAM_WPA_ENABLED 1
+#define IEEE_PARAM_TKIP_COUNTERMEASURES 2
+#define IEEE_PARAM_DROP_UNENCRYPTED 3
+#define IEEE_PARAM_PRIVACY_INVOKED 4
+#define IEEE_PARAM_AUTH_ALGS 5
+#define IEEE_PARAM_IEEE_802_1X 6
+#define IEEE_PARAM_WPAX_SELECT 7
+
+#define AUTH_ALG_OPEN_SYSTEM 0x1
+#define AUTH_ALG_SHARED_KEY 0x2
+#define AUTH_ALG_LEAP 0x00000004
+
+#define IEEE_MLME_STA_DEAUTH 1
+#define IEEE_MLME_STA_DISASSOC 2
+
+#define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
+#define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
+#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
+#define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
+#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
+#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
+
+#define IEEE_CRYPT_ALG_NAME_LEN 16
+
+#define WPA_CIPHER_NONE BIT(0)
+#define WPA_CIPHER_WEP40 BIT(1)
+#define WPA_CIPHER_WEP104 BIT(2)
+#define WPA_CIPHER_TKIP BIT(3)
+#define WPA_CIPHER_CCMP BIT(4)
+
+
+#define WPA_SELECTOR_LEN 4
+extern u8 RTW_WPA_OUI_TYPE[];
+extern u16 RTW_WPA_VERSION;
+extern u8 WPA_AUTH_KEY_MGMT_NONE[];
+extern u8 WPA_AUTH_KEY_MGMT_UNSPEC_802_1X[];
+extern u8 WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
+extern u8 WPA_CIPHER_SUITE_NONE[];
+extern u8 WPA_CIPHER_SUITE_WEP40[];
+extern u8 WPA_CIPHER_SUITE_TKIP[];
+extern u8 WPA_CIPHER_SUITE_WRAP[];
+extern u8 WPA_CIPHER_SUITE_CCMP[];
+extern u8 WPA_CIPHER_SUITE_WEP104[];
+
+#define RSN_HEADER_LEN 4
+#define RSN_SELECTOR_LEN 4
+
+extern u16 RSN_VERSION_BSD;
+extern u8 RSN_AUTH_KEY_MGMT_UNSPEC_802_1X[];
+extern u8 RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
+extern u8 RSN_CIPHER_SUITE_NONE[];
+extern u8 RSN_CIPHER_SUITE_WEP40[];
+extern u8 RSN_CIPHER_SUITE_TKIP[];
+extern u8 RSN_CIPHER_SUITE_WRAP[];
+extern u8 RSN_CIPHER_SUITE_CCMP[];
+extern u8 RSN_CIPHER_SUITE_WEP104[];
+
+enum ratr_table_mode {
+ RATR_INX_WIRELESS_NGB = 0, /* BGN 40 Mhz 2SS 1SS */
+ RATR_INX_WIRELESS_NG = 1, /* GN or N */
+ RATR_INX_WIRELESS_NB = 2, /* BGN 20 Mhz 2SS 1SS or BN */
+ RATR_INX_WIRELESS_N = 3,
+ RATR_INX_WIRELESS_GB = 4,
+ RATR_INX_WIRELESS_G = 5,
+ RATR_INX_WIRELESS_B = 6,
+ RATR_INX_WIRELESS_MC = 7,
+ RATR_INX_WIRELESS_AC_N = 8,
+};
+
+enum NETWORK_TYPE {
+ WIRELESS_INVALID = 0,
+ /* Sub-Element */
+ WIRELESS_11B = BIT(0), /* tx:cck only, rx:cck only, hw: cck */
+ WIRELESS_11G = BIT(1), /* tx:ofdm only, rx:ofdm & cck, hw:cck & ofdm*/
+ WIRELESS_11A = BIT(2), /* tx:ofdm only, rx: ofdm only, hw:ofdm only */
+ WIRELESS_11_24N = BIT(3), /* tx:MCS only, rx:MCS & cck, hw:MCS & cck */
+ WIRELESS_11_5N = BIT(4), /* tx:MCS only, rx:MCS & ofdm, hw:ofdm only */
+ WIRELESS_AC = BIT(6),
+
+ /* Combination */
+ /* tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm */
+ WIRELESS_11BG = (WIRELESS_11B | WIRELESS_11G),
+ /* tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm */
+ WIRELESS_11G_24N = (WIRELESS_11G | WIRELESS_11_24N),
+ /* tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */
+ WIRELESS_11A_5N = (WIRELESS_11A | WIRELESS_11_5N),
+ /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */
+ WIRELESS_11BG_24N = (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N),
+ /* tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */
+ WIRELESS_11AGN = (WIRELESS_11A | WIRELESS_11G | WIRELESS_11_24N |
+ WIRELESS_11_5N),
+ WIRELESS_11ABGN = (WIRELESS_11A | WIRELESS_11B | WIRELESS_11G |
+ WIRELESS_11_24N | WIRELESS_11_5N),
+};
+
+#define SUPPORTED_24G_NETTYPE_MSK \
+ (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N)
+#define SUPPORTED_5G_NETTYPE_MSK \
+ (WIRELESS_11A | WIRELESS_11_5N)
+
+#define IsSupported24G(NetType) \
+ ((NetType) & SUPPORTED_24G_NETTYPE_MSK ? true : false)
+#define IsSupported5G(NetType) \
+ ((NetType) & SUPPORTED_5G_NETTYPE_MSK ? true : false)
+
+#define IsEnableHWCCK(NetType) \
+ IsSupported24G(NetType)
+#define IsEnableHWOFDM(NetType) \
+ ((NetType) & (WIRELESS_11G | WIRELESS_11_24N | \
+ SUPPORTED_5G_NETTYPE_MSK) ? true : false)
+
+#define IsSupportedRxCCK(NetType) IsEnableHWCCK(NetType)
+#define IsSupportedRxOFDM(NetType) IsEnableHWOFDM(NetType)
+#define IsSupportedRxMCS(NetType) IsEnableHWOFDM(NetType)
+
+#define IsSupportedTxCCK(NetType) \
+ ((NetType) & (WIRELESS_11B) ? true : false)
+#define IsSupportedTxOFDM(NetType) \
+ ((NetType) & (WIRELESS_11G|WIRELESS_11A) ? true : false)
+#define IsSupportedTxMCS(NetType) \
+ ((NetType) & (WIRELESS_11_24N|WIRELESS_11_5N) ? true : false)
+
+struct ieee_param {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ union {
+ struct {
+ u8 name;
+ u32 value;
+ } wpa_param;
+ struct {
+ u32 len;
+ u8 reserved[32];
+ u8 data[0];
+ } wpa_ie;
+ struct {
+ int command;
+ int reason_code;
+ } mlme;
+ struct {
+ u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
+ u8 set_tx;
+ u32 err;
+ u8 idx;
+ u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+ u16 key_len;
+ u8 key[0];
+ } crypt;
+#ifdef CONFIG_88EU_AP_MODE
+ struct {
+ u16 aid;
+ u16 capability;
+ int flags;
+ u8 tx_supp_rates[16];
+ struct ieee80211_ht_cap ht_cap;
+ } add_sta;
+ struct {
+ u8 reserved[2];/* for set max_num_sta */
+ u8 buf[0];
+ } bcn_ie;
+#endif
+
+ } u;
+};
+
+#ifdef CONFIG_88EU_AP_MODE
+struct ieee_param_ex {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ u8 data[0];
+};
+
+struct sta_data {
+ u16 aid;
+ u16 capability;
+ int flags;
+ u32 sta_set;
+ u8 tx_supp_rates[16];
+ u32 tx_supp_rates_len;
+ struct ieee80211_ht_cap ht_cap;
+ u64 rx_pkts;
+ u64 rx_bytes;
+ u64 rx_drops;
+ u64 tx_pkts;
+ u64 tx_bytes;
+ u64 tx_drops;
+};
+#endif
+
+#define IEEE80211_DATA_LEN 2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ 6.2.1.1.2.
+
+ The figure in section 7.1.2 suggests a body size of up to 2312
+ bytes is allowed, which is a bit confusing, I suspect this
+ represents the 2304 bytes of real data, plus a possible 8 bytes of
+ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+#define IEEE80211_HLEN 30
+#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+/* this is stolen from ipw2200 driver */
+#define IEEE_IBSS_MAC_HASH_SIZE 31
+
+struct ieee_ibss_seq {
+ u8 mac[ETH_ALEN];
+ u16 seq_num;
+ u16 frag_num;
+ unsigned long packet_time;
+ struct list_head list;
+};
+
+struct rtw_ieee80211_hdr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+} __packed;
+
+struct rtw_ieee80211_hdr_3addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+} __packed;
+
+struct rtw_ieee80211_hdr_qos {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+ u16 qc;
+} __packed;
+
+struct rtw_ieee80211_hdr_3addr_qos {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u16 qc;
+} __packed;
+
+struct eapol {
+ u8 snap[6];
+ u16 ethertype;
+ u8 version;
+ u8 type;
+ u16 length;
+} __packed;
+
+enum eap_type {
+ EAP_PACKET = 0,
+ EAPOL_START,
+ EAPOL_LOGOFF,
+ EAPOL_KEY,
+ EAPOL_ENCAP_ASF_ALERT
+};
+
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN 4
+
+#define MIN_FRAG_THRESHOLD 256U
+#define MAX_FRAG_THRESHOLD 2346U
+
+/* Frame control field constants */
+#define RTW_IEEE80211_FCTL_VERS 0x0003
+#define RTW_IEEE80211_FCTL_FTYPE 0x000c
+#define RTW_IEEE80211_FCTL_STYPE 0x00f0
+#define RTW_IEEE80211_FCTL_TODS 0x0100
+#define RTW_IEEE80211_FCTL_FROMDS 0x0200
+#define RTW_IEEE80211_FCTL_MOREFRAGS 0x0400
+#define RTW_IEEE80211_FCTL_RETRY 0x0800
+#define RTW_IEEE80211_FCTL_PM 0x1000
+#define RTW_IEEE80211_FCTL_MOREDATA 0x2000
+#define RTW_IEEE80211_FCTL_PROTECTED 0x4000
+#define RTW_IEEE80211_FCTL_ORDER 0x8000
+#define RTW_IEEE80211_FCTL_CTL_EXT 0x0f00
+
+#define RTW_IEEE80211_FTYPE_MGMT 0x0000
+#define RTW_IEEE80211_FTYPE_CTL 0x0004
+#define RTW_IEEE80211_FTYPE_DATA 0x0008
+#define RTW_IEEE80211_FTYPE_EXT 0x000c
+
+/* management */
+#define RTW_IEEE80211_STYPE_ASSOC_REQ 0x0000
+#define RTW_IEEE80211_STYPE_ASSOC_RESP 0x0010
+#define RTW_IEEE80211_STYPE_REASSOC_REQ 0x0020
+#define RTW_IEEE80211_STYPE_REASSOC_RESP 0x0030
+#define RTW_IEEE80211_STYPE_PROBE_REQ 0x0040
+#define RTW_IEEE80211_STYPE_PROBE_RESP 0x0050
+#define RTW_IEEE80211_STYPE_BEACON 0x0080
+#define RTW_IEEE80211_STYPE_ATIM 0x0090
+#define RTW_IEEE80211_STYPE_DISASSOC 0x00A0
+#define RTW_IEEE80211_STYPE_AUTH 0x00B0
+#define RTW_IEEE80211_STYPE_DEAUTH 0x00C0
+#define RTW_IEEE80211_STYPE_ACTION 0x00D0
+
+/* control */
+#define RTW_IEEE80211_STYPE_CTL_EXT 0x0060
+#define RTW_IEEE80211_STYPE_BACK_REQ 0x0080
+#define RTW_IEEE80211_STYPE_BACK 0x0090
+#define RTW_IEEE80211_STYPE_PSPOLL 0x00A0
+#define RTW_IEEE80211_STYPE_RTS 0x00B0
+#define RTW_IEEE80211_STYPE_CTS 0x00C0
+#define RTW_IEEE80211_STYPE_ACK 0x00D0
+#define RTW_IEEE80211_STYPE_CFEND 0x00E0
+#define RTW_IEEE80211_STYPE_CFENDACK 0x00F0
+
+/* data */
+#define RTW_IEEE80211_STYPE_DATA 0x0000
+#define RTW_IEEE80211_STYPE_DATA_CFACK 0x0010
+#define RTW_IEEE80211_STYPE_DATA_CFPOLL 0x0020
+#define RTW_IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
+#define RTW_IEEE80211_STYPE_NULLFUNC 0x0040
+#define RTW_IEEE80211_STYPE_CFACK 0x0050
+#define RTW_IEEE80211_STYPE_CFPOLL 0x0060
+#define RTW_IEEE80211_STYPE_CFACKPOLL 0x0070
+#define RTW_IEEE80211_STYPE_QOS_DATA 0x0080
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFACK 0x0090
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0
+#define RTW_IEEE80211_STYPE_QOS_NULLFUNC 0x00C0
+#define RTW_IEEE80211_STYPE_QOS_CFACK 0x00D0
+#define RTW_IEEE80211_STYPE_QOS_CFPOLL 0x00E0
+#define RTW_IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0
+
+/* sequence control field */
+#define RTW_IEEE80211_SCTL_FRAG 0x000F
+#define RTW_IEEE80211_SCTL_SEQ 0xFFF0
+
+#define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0)
+#define RTW_ERP_INFO_USE_PROTECTION BIT(1)
+#define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
+
+/* QoS, QOS */
+#define NORMAL_ACK 0
+#define NO_ACK 1
+#define NON_EXPLICIT_ACK 2
+#define BLOCK_ACK 3
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#define ETH_P_ECONET 0x0018
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+ u8 dsap; /* always 0xAA */
+ u8 ssap; /* always 0xAA */
+ u8 ctrl; /* always 0x03 */
+ u8 oui[P80211_OUI_LEN]; /* organizational universal id */
+} __packed;
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_TYPE(fc) ((fc) & RTW_IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & RTW_IEEE80211_FCTL_STYPE)
+
+#define WLAN_QC_GET_TID(qc) ((qc) & 0x0f)
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & RTW_IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq) ((seq) & RTW_IEEE80211_SCTL_SEQ)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
+
+/* Status codes */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+/* 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+
+/* Reason codes */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+#define WLAN_REASON_JOIN_WRONG_CHANNEL 65534
+#define WLAN_REASON_EXPIRATION_CHK 65535
+
+/* Information Element IDs */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_FH_PARAMS 2
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_CHALLENGE 16
+/* EIDs defined by IEEE 802.11h - START */
+#define WLAN_EID_PWR_CONSTRAINT 32
+#define WLAN_EID_PWR_CAPABILITY 33
+#define WLAN_EID_TPC_REQUEST 34
+#define WLAN_EID_TPC_REPORT 35
+#define WLAN_EID_SUPPORTED_CHANNELS 36
+#define WLAN_EID_CHANNEL_SWITCH 37
+#define WLAN_EID_MEASURE_REQUEST 38
+#define WLAN_EID_MEASURE_REPORT 39
+#define WLAN_EID_QUITE 40
+#define WLAN_EID_IBSS_DFS 41
+/* EIDs defined by IEEE 802.11h - END */
+#define WLAN_EID_ERP_INFO 42
+#define WLAN_EID_HT_CAP 45
+#define WLAN_EID_RSN 48
+#define WLAN_EID_EXT_SUPP_RATES 50
+#define WLAN_EID_MOBILITY_DOMAIN 54
+#define WLAN_EID_FAST_BSS_TRANSITION 55
+#define WLAN_EID_TIMEOUT_INTERVAL 56
+#define WLAN_EID_RIC_DATA 57
+#define WLAN_EID_HT_OPERATION 61
+#define WLAN_EID_SECONDARY_CHANNEL_OFFSET 62
+#define WLAN_EID_20_40_BSS_COEXISTENCE 72
+#define WLAN_EID_20_40_BSS_INTOLERANT 73
+#define WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS 74
+#define WLAN_EID_MMIE 76
+#define WLAN_EID_VENDOR_SPECIFIC 221
+#define WLAN_EID_GENERIC (WLAN_EID_VENDOR_SPECIFIC)
+
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+#define IEEE80211_CCK_MODULATION (1<<0)
+#define IEEE80211_OFDM_MODULATION (1<<1)
+
+#define IEEE80211_24GHZ_BAND (1<<0)
+#define IEEE80211_52GHZ_BAND (1<<1)
+
+#define IEEE80211_CCK_RATE_LEN 4
+#define IEEE80211_NUM_OFDM_RATESLEN 8
+
+#define IEEE80211_CCK_RATE_1MB 0x02
+#define IEEE80211_CCK_RATE_2MB 0x04
+#define IEEE80211_CCK_RATE_5MB 0x0B
+#define IEEE80211_CCK_RATE_11MB 0x16
+#define IEEE80211_OFDM_RATE_LEN 8
+#define IEEE80211_OFDM_RATE_6MB 0x0C
+#define IEEE80211_OFDM_RATE_9MB 0x12
+#define IEEE80211_OFDM_RATE_12MB 0x18
+#define IEEE80211_OFDM_RATE_18MB 0x24
+#define IEEE80211_OFDM_RATE_24MB 0x30
+#define IEEE80211_OFDM_RATE_36MB 0x48
+#define IEEE80211_OFDM_RATE_48MB 0x60
+#define IEEE80211_OFDM_RATE_54MB 0x6C
+#define IEEE80211_BASIC_RATE_MASK 0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
+
+#define IEEE80211_CCK_RATES_MASK 0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
+ IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK \
+ (IEEE80211_CCK_BASIC_RATES_MASK | \
+ IEEE80211_CCK_RATE_5MB_MASK | \
+ IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
+ IEEE80211_OFDM_RATE_12MB_MASK | \
+ IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK \
+ (IEEE80211_OFDM_BASIC_RATES_MASK | \
+ IEEE80211_OFDM_RATE_9MB_MASK | \
+ IEEE80211_OFDM_RATE_18MB_MASK | \
+ IEEE80211_OFDM_RATE_36MB_MASK | \
+ IEEE80211_OFDM_RATE_48MB_MASK | \
+ IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK \
+ (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+ IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES 8
+#define IEEE80211_NUM_CCK_RATES 4
+#define IEEE80211_OFDM_SHIFT_MASK_A 4
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ * information for frames received. Not setting these will not cause
+ * any adverse affects. */
+struct ieee80211_rx_stats {
+ /* u32 mac_time[2]; */
+ s8 rssi;
+ u8 signal;
+ u8 noise;
+ u8 received_channel;
+ u16 rate; /* in 100 kbps */
+ /* u8 control; */
+ u8 mask;
+ u8 freq;
+ u16 len;
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+ u32 first_frag_time;
+ uint seq;
+ uint last_frag;
+ uint qos; /* jackson */
+ uint tid; /* jackson */
+ struct sk_buff *skb;
+ u8 src_addr[ETH_ALEN];
+ u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+ uint tx_unicast_frames;
+ uint tx_multicast_frames;
+ uint tx_fragments;
+ uint tx_unicast_octets;
+ uint tx_multicast_octets;
+ uint tx_deferred_transmissions;
+ uint tx_single_retry_frames;
+ uint tx_multiple_retry_frames;
+ uint tx_retry_limit_exceeded;
+ uint tx_discards;
+ uint rx_unicast_frames;
+ uint rx_multicast_frames;
+ uint rx_fragments;
+ uint rx_unicast_octets;
+ uint rx_multicast_octets;
+ uint rx_fcs_errors;
+ uint rx_discards_no_buffer;
+ uint tx_discards_wrong_sa;
+ uint rx_discards_undecryptable;
+ uint rx_message_in_msg_fragments;
+ uint rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_softmac_stats {
+ uint rx_ass_ok;
+ uint rx_ass_err;
+ uint rx_probe_rq;
+ uint tx_probe_rs;
+ uint tx_beacons;
+ uint rx_auth_rq;
+ uint rx_auth_rs_ok;
+ uint rx_auth_rs_err;
+ uint tx_auth_rq;
+ uint no_auth_rs;
+ uint no_ass_rs;
+ uint tx_ass_rq;
+ uint rx_ass_rq;
+ uint tx_probe_rq;
+ uint reassoc;
+ uint swtxstop;
+ uint swtxawake;
+};
+
+#define SEC_KEY_1 (1<<0)
+#define SEC_KEY_2 (1<<1)
+#define SEC_KEY_3 (1<<2)
+#define SEC_KEY_4 (1<<3)
+#define SEC_ACTIVE_KEY (1<<4)
+#define SEC_AUTH_MODE (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL (1<<7)
+#define SEC_ENABLED (1<<8)
+
+#define SEC_LEVEL_0 0 /* None */
+#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+
+struct ieee80211_security {
+ u16 active_key:2,
+ enabled:1,
+ auth_mode:2,
+ auth_algo:4,
+ unicast_uses_group:1;
+ u8 key_sizes[WEP_KEYS];
+ u8 keys[WEP_KEYS][WEP_KEY_LEN];
+ u8 level;
+ u16 flags;
+} __packed;
+
+/*
+
+ 802.11 data frame from AP
+
+ ,-------------------------------------------------------------------.
+Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
+ | | tion | (BSSID) | | | ence | data | |
+ `-------------------------------------------------------------------'
+
+Total: 28-2340 bytes
+
+*/
+
+struct ieee80211_header_data {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[6];
+ u8 addr2[6];
+ u8 addr3[6];
+ u16 seq_ctrl;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+/* Management Frame Information Element Types */
+#define MFIE_TYPE_SSID 0
+#define MFIE_TYPE_RATES 1
+#define MFIE_TYPE_FH_SET 2
+#define MFIE_TYPE_DS_SET 3
+#define MFIE_TYPE_CF_SET 4
+#define MFIE_TYPE_TIM 5
+#define MFIE_TYPE_IBSS_SET 6
+#define MFIE_TYPE_CHALLENGE 16
+#define MFIE_TYPE_ERP 42
+#define MFIE_TYPE_RSN 48
+#define MFIE_TYPE_RATES_EX 50
+#define MFIE_TYPE_GENERIC 221
+
+struct ieee80211_info_element_hdr {
+ u8 id;
+ u8 len;
+} __packed;
+
+struct ieee80211_info_element {
+ u8 id;
+ u8 len;
+ u8 data[0];
+} __packed;
+
+/*
+ * These are the data types that can make up management packets
+ *
+ u16 auth_algorithm;
+ u16 auth_sequence;
+ u16 beacon_interval;
+ u16 capability;
+ u8 current_ap[ETH_ALEN];
+ u16 listen_interval;
+ struct {
+ u16 association_id:14, reserved:2;
+ } __packed;
+ u32 time_stamp[2];
+ u16 reason;
+ u16 status;
+*/
+
+#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
+#define IEEE80211_DEFAULT_BASIC_RATE 10
+
+struct ieee80211_authentication {
+ struct ieee80211_header_data header;
+ u16 algorithm;
+ u16 transaction;
+ u16 status;
+ /* struct ieee80211_info_element_hdr info_element; */
+} __packed;
+
+struct ieee80211_probe_response {
+ struct ieee80211_header_data header;
+ u32 time_stamp[2];
+ u16 beacon_interval;
+ u16 capability;
+ struct ieee80211_info_element info_element;
+} __packed;
+
+struct ieee80211_probe_request {
+ struct ieee80211_header_data header;
+} __packed;
+
+struct ieee80211_assoc_request_frame {
+ struct rtw_ieee80211_hdr_3addr header;
+ u16 capability;
+ u16 listen_interval;
+ struct ieee80211_info_element_hdr info_element;
+} __packed;
+
+struct ieee80211_assoc_response_frame {
+ struct rtw_ieee80211_hdr_3addr header;
+ u16 capability;
+ u16 status;
+ u16 aid;
+} __packed;
+
+struct ieee80211_txb {
+ u8 nr_frags;
+ u8 encrypted;
+ u16 reserved;
+ u16 frag_size;
+ u16 payload_size;
+ struct sk_buff *fragments[0];
+};
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES 42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
+/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates. Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH ((u8)12)
+#define MAX_RATES_EX_LENGTH ((u8)16)
+#define MAX_NETWORK_COUNT 128
+#define MAX_CHANNEL_NUMBER 161
+#define IEEE80211_SOFTMAC_SCAN_TIME 400
+/* HZ / 2) */
+#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
+
+#define CRC_LENGTH 4U
+
+#define MAX_WPA_IE_LEN (256)
+#define MAX_WPS_IE_LEN (512)
+#define MAX_P2P_IE_LEN (256)
+#define MAX_WFD_IE_LEN (128)
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM (1<<1)
+#define NETWORK_HAS_CCK (1<<2)
+
+#define IEEE80211_DTIM_MBCAST 4
+#define IEEE80211_DTIM_UCAST 2
+#define IEEE80211_DTIM_VALID 1
+#define IEEE80211_DTIM_INVALID 0
+
+#define IEEE80211_PS_DISABLED 0
+#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
+#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
+#define IW_ESSID_MAX_SIZE 32
+/*
+join_res:
+-1: authentication fail
+-2: association fail
+> 0: TID
+*/
+
+enum ieee80211_state {
+ /* the card is not linked at all */
+ IEEE80211_NOLINK = 0,
+
+ /* IEEE80211_ASSOCIATING* are for BSS client mode
+ * the driver shall not perform RX filtering unless
+ * the state is LINKED.
+ * The driver shall just check for the state LINKED and
+ * defaults to NOLINK for ALL the other states (including
+ * LINKED_SCANNING)
+ */
+
+ /* the association procedure will start (wq scheduling)*/
+ IEEE80211_ASSOCIATING,
+ IEEE80211_ASSOCIATING_RETRY,
+
+ /* the association procedure is sending AUTH request*/
+ IEEE80211_ASSOCIATING_AUTHENTICATING,
+
+ /* the association procedure has successfully authentcated
+ * and is sending association request
+ */
+ IEEE80211_ASSOCIATING_AUTHENTICATED,
+
+ /* the link is ok. the card associated to a BSS or linked
+ * to a ibss cell or acting as an AP and creating the bss
+ */
+ IEEE80211_LINKED,
+
+ /* same as LINKED, but the driver shall apply RX filter
+ * rules as we are in NO_LINK mode. As the card is still
+ * logically linked, but it is doing a syncro site survey
+ * then it will be back to LINKED state.
+ */
+ IEEE80211_LINKED_SCANNING,
+
+};
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+
+static inline int is_multicast_mac_addr(const u8 *addr)
+{
+ return ((addr[0] != 0xff) && (0x01 & addr[0]));
+}
+
+static inline int is_broadcast_mac_addr(const u8 *addr)
+{
+ return (addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&
+ (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff);
+}
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+
+struct tx_pending {
+ int frag;
+ struct ieee80211_txb *txb;
+};
+
+#define MAXTID 16
+
+#define IEEE_A (1<<0)
+#define IEEE_B (1<<1)
+#define IEEE_G (1<<2)
+#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
+
+/* Baron move to ieee80211.c */
+int ieee80211_is_empty_essid(const char *essid, int essid_len);
+int ieee80211_get_hdrlen(u16 fc);
+
+/* Action category code */
+enum rtw_ieee80211_category {
+ RTW_WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+ RTW_WLAN_CATEGORY_QOS = 1,
+ RTW_WLAN_CATEGORY_DLS = 2,
+ RTW_WLAN_CATEGORY_BACK = 3,
+ RTW_WLAN_CATEGORY_PUBLIC = 4, /* IEEE 802.11 public action frames */
+ RTW_WLAN_CATEGORY_RADIO_MEASUREMENT = 5,
+ RTW_WLAN_CATEGORY_FT = 6,
+ RTW_WLAN_CATEGORY_HT = 7,
+ RTW_WLAN_CATEGORY_SA_QUERY = 8,
+ RTW_WLAN_CATEGORY_TDLS = 12,
+ RTW_WLAN_CATEGORY_WMM = 17,
+ RTW_WLAN_CATEGORY_P2P = 0x7f,/* P2P action frames */
+};
+
+/* SPECTRUM_MGMT action code */
+enum rtw_ieee80211_spectrum_mgmt_actioncode {
+ RTW_WLAN_ACTION_SPCT_MSR_REQ = 0,
+ RTW_WLAN_ACTION_SPCT_MSR_RPRT = 1,
+ RTW_WLAN_ACTION_SPCT_TPC_REQ = 2,
+ RTW_WLAN_ACTION_SPCT_TPC_RPRT = 3,
+ RTW_WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+ RTW_WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
+};
+
+enum _PUBLIC_ACTION {
+ ACT_PUBLIC_BSSCOEXIST = 0, /* 20/40 BSS Coexistence */
+ ACT_PUBLIC_DSE_ENABLE = 1,
+ ACT_PUBLIC_DSE_DEENABLE = 2,
+ ACT_PUBLIC_DSE_REG_LOCATION = 3,
+ ACT_PUBLIC_EXT_CHL_SWITCH = 4,
+ ACT_PUBLIC_DSE_MSR_REQ = 5,
+ ACT_PUBLIC_DSE_MSR_RPRT = 6,
+ ACT_PUBLIC_MP = 7, /* Measurement Pilot */
+ ACT_PUBLIC_DSE_PWR_CONSTRAINT = 8,
+ ACT_PUBLIC_VENDOR = 9, /* for WIFI_DIRECT */
+ ACT_PUBLIC_GAS_INITIAL_REQ = 10,
+ ACT_PUBLIC_GAS_INITIAL_RSP = 11,
+ ACT_PUBLIC_GAS_COMEBACK_REQ = 12,
+ ACT_PUBLIC_GAS_COMEBACK_RSP = 13,
+ ACT_PUBLIC_TDLS_DISCOVERY_RSP = 14,
+ ACT_PUBLIC_LOCATION_TRACK = 15,
+ ACT_PUBLIC_MAX
+};
+
+/* BACK action code */
+enum rtw_ieee80211_back_actioncode {
+ RTW_WLAN_ACTION_ADDBA_REQ = 0,
+ RTW_WLAN_ACTION_ADDBA_RESP = 1,
+ RTW_WLAN_ACTION_DELBA = 2,
+};
+
+/* HT features action code */
+enum rtw_ieee80211_ht_actioncode {
+ RTW_WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
+ RTW_WLAN_ACTION_SM_PS = 1,
+ RTW_WLAN_ACTION_PSPM = 2,
+ RTW_WLAN_ACTION_PCO_PHASE = 3,
+ RTW_WLAN_ACTION_MIMO_CSI_MX = 4,
+ RTW_WLAN_ACTION_MIMO_NONCP_BF = 5,
+ RTW_WLAN_ACTION_MIMP_CP_BF = 6,
+ RTW_WLAN_ACTION_ASEL_INDICATES_FB = 7,
+ RTW_WLAN_ACTION_HI_INFO_EXCHG = 8,
+};
+
+/* BACK (block-ack) parties */
+enum rtw_ieee80211_back_parties {
+ RTW_WLAN_BACK_RECIPIENT = 0,
+ RTW_WLAN_BACK_INITIATOR = 1,
+ RTW_WLAN_BACK_TIMER = 2,
+};
+
+#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
+ * 00:50:F2 */
+#define WME_OUI_TYPE 2
+#define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WME_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WME_VERSION 1
+
+#define WME_ACTION_CODE_SETUP_REQUEST 0
+#define WME_ACTION_CODE_SETUP_RESPONSE 1
+#define WME_ACTION_CODE_TEARDOWN 2
+
+#define WME_SETUP_RESPONSE_STATUS_ADMISSION_ACCEPTED 0
+#define WME_SETUP_RESPONSE_STATUS_INVALID_PARAMETERS 1
+#define WME_SETUP_RESPONSE_STATUS_REFUSED 3
+
+#define WME_TSPEC_DIRECTION_UPLINK 0
+#define WME_TSPEC_DIRECTION_DOWNLINK 1
+#define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3
+
+#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */
+
+#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
+
+/**
+ * enum rtw_ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @RTW_IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @RTW_IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ * on this channel.
+ * @RTW_IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @RTW_IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @RTW_IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
+ * is not permitted.
+ * @RTW_IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
+ * is not permitted.
+ */
+enum rtw_ieee80211_channel_flags {
+ RTW_IEEE80211_CHAN_DISABLED = 1<<0,
+ RTW_IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
+ RTW_IEEE80211_CHAN_NO_IBSS = 1<<2,
+ RTW_IEEE80211_CHAN_RADAR = 1<<3,
+ RTW_IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
+ RTW_IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
+};
+
+#define RTW_IEEE80211_CHAN_NO_HT40 \
+ (RTW_IEEE80211_CHAN_NO_HT40PLUS | RTW_IEEE80211_CHAN_NO_HT40MINUS)
+
+/* Represent channel details, subset of ieee80211_channel */
+struct rtw_ieee80211_channel {
+ u16 hw_value;
+ u32 flags;
+};
+
+#define CHAN_FMT \
+ "hw_value:%u, " \
+ "flags:0x%08x" \
+
+#define CHAN_ARG(channel) \
+ (channel)->hw_value \
+ , (channel)->flags \
+
+/* Parsed Information Elements */
+struct rtw_ieee802_11_elems {
+ u8 *ssid;
+ u8 ssid_len;
+ u8 *supp_rates;
+ u8 supp_rates_len;
+ u8 *fh_params;
+ u8 fh_params_len;
+ u8 *ds_params;
+ u8 ds_params_len;
+ u8 *cf_params;
+ u8 cf_params_len;
+ u8 *tim;
+ u8 tim_len;
+ u8 *ibss_params;
+ u8 ibss_params_len;
+ u8 *challenge;
+ u8 challenge_len;
+ u8 *erp_info;
+ u8 erp_info_len;
+ u8 *ext_supp_rates;
+ u8 ext_supp_rates_len;
+ u8 *wpa_ie;
+ u8 wpa_ie_len;
+ u8 *rsn_ie;
+ u8 rsn_ie_len;
+ u8 *wme;
+ u8 wme_len;
+ u8 *wme_tspec;
+ u8 wme_tspec_len;
+ u8 *wps_ie;
+ u8 wps_ie_len;
+ u8 *power_cap;
+ u8 power_cap_len;
+ u8 *supp_channels;
+ u8 supp_channels_len;
+ u8 *mdie;
+ u8 mdie_len;
+ u8 *ftie;
+ u8 ftie_len;
+ u8 *timeout_int;
+ u8 timeout_int_len;
+ u8 *ht_capabilities;
+ u8 ht_capabilities_len;
+ u8 *ht_operation;
+ u8 ht_operation_len;
+ u8 *vendor_ht_cap;
+ u8 vendor_ht_cap_len;
+};
+
+enum parse_res {
+ ParseOK = 0,
+ ParseUnknown = 1,
+ ParseFailed = -1
+};
+
+enum parse_res rtw_ieee802_11_parse_elems(u8 *start, uint len,
+ struct rtw_ieee802_11_elems *elems,
+ int show_errors);
+
+u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len,
+ unsigned char *source, unsigned int *frlen);
+u8 *rtw_set_ie(u8 *pbuf, int index, uint len, u8 *source, uint *frlen);
+
+enum secondary_ch_offset {
+ SCN = 0, /* no secondary channel */
+ SCA = 1, /* secondary channel above */
+ SCB = 3, /* secondary channel below */
+};
+u8 secondary_ch_offset_to_hal_ch_offset(u8 ch_offset);
+u8 hal_ch_offset_to_secondary_ch_offset(u8 ch_offset);
+u8 *rtw_set_ie_ch_switch(u8 *buf, u32 *buf_len, u8 ch_switch_mode,
+ u8 new_ch, u8 ch_switch_cnt);
+u8 *rtw_set_ie_secondary_ch_offset(u8 *buf, u32 *buf_len,
+ u8 secondary_ch_offset);
+u8 *rtw_set_ie_mesh_ch_switch_parm(u8 *buf, u32 *buf_len, u8 ttl,
+ u8 flags, u16 reason, u16 precedence);
+
+u8 *rtw_get_ie(u8 *pbuf, int index, int *len, int limit);
+u8 *rtw_get_ie_ex(u8 *in_ie, uint in_len, u8 eid, u8 *oui,
+ u8 oui_len, u8 *ie, uint *ielen);
+int rtw_ies_remove_ie(u8 *ies, uint *ies_len, uint offset,
+ u8 eid, u8 *oui, u8 oui_len);
+
+void rtw_set_supported_rate(u8 *SupportedRates, uint mode);
+
+unsigned char *rtw_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit);
+unsigned char *rtw_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len, int limit);
+int rtw_get_wpa_cipher_suite(u8 *s);
+int rtw_get_wpa2_cipher_suite(u8 *s);
+int rtw_get_wapi_ie(u8 *in_ie, uint in_len, u8 *wapi_ie, u16 *wapi_len);
+int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
+ int *pairwise_cipher, int *is_8021x);
+int rtw_parse_wpa2_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
+ int *pairwise_cipher, int *is_8021x);
+
+int rtw_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len,
+ u8 *wpa_ie, u16 *wpa_len);
+
+u8 rtw_is_wps_ie(u8 *ie_ptr, uint *wps_ielen);
+u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen);
+u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id,
+ u8 *buf_attr, u32 *len_attr);
+u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id,
+ u8 *buf_content, uint *len_content);
+
+/**
+ * for_each_ie - iterate over continuous IEs
+ * @ie:
+ * @buf:
+ * @buf_len:
+ */
+#define for_each_ie(ie, buf, buf_len) \
+ for (ie = (void *)buf; (((u8 *)ie) - ((u8 *)buf) + 1) < buf_len; \
+ ie = (void *)(((u8 *)ie) + *(((u8 *)ie)+1) + 2))
+
+void dump_ies(u8 *buf, u32 buf_len);
+void dump_wps_ie(u8 *ie, u32 ie_len);
+
+#ifdef CONFIG_88EU_P2P
+void dump_p2p_ie(u8 *ie, u32 ie_len);
+u8 *rtw_get_p2p_ie(u8 *in_ie, int in_len, u8 *p2p_ie, uint *p2p_ielen);
+u8 *rtw_get_p2p_attr(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id,
+ u8 *buf_attr, u32 *len_attr);
+u8 *rtw_get_p2p_attr_content(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id,
+ u8 *buf_content, uint *len_content);
+u32 rtw_set_p2p_attr_content(u8 *pbuf, u8 attr_id, u16 attr_len,
+ u8 *pdata_attr);
+void rtw_wlan_bssid_ex_remove_p2p_attr(struct wlan_bssid_ex *bss_ex,
+ u8 attr_id);
+#endif
+
+uint rtw_get_rateset_len(u8 *rateset);
+
+struct registry_priv;
+int rtw_generate_ie(struct registry_priv *pregistrypriv);
+
+int rtw_get_bit_value_from_ieee_value(u8 val);
+
+uint rtw_is_cckrates_included(u8 *rate);
+
+uint rtw_is_cckratesonly_included(u8 *rate);
+
+int rtw_check_network_type(unsigned char *rate, int ratelen, int channel);
+
+void rtw_get_bcn_info(struct wlan_network *pnetwork);
+
+void rtw_macaddr_cfg(u8 *mac_addr);
+
+u16 rtw_mcs_rate(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40,
+ unsigned char *MCS_rate);
+
+int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8 *category,
+ u8 *action);
+const char *action_public_str(u8 action);
+
+#endif /* IEEE80211_H */
diff --git a/drivers/staging/r8188eu/include/ieee80211_ext.h b/drivers/staging/r8188eu/include/ieee80211_ext.h
new file mode 100644
index 000000000000..fa9e52572fe9
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ieee80211_ext.h
@@ -0,0 +1,287 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IEEE80211_EXT_H
+#define __IEEE80211_EXT_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define WMM_OUI_TYPE 2
+#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WMM_VERSION 1
+
+#define WPA_PROTO_WPA BIT(0)
+#define WPA_PROTO_RSN BIT(1)
+
+#define WPA_KEY_MGMT_IEEE8021X BIT(0)
+#define WPA_KEY_MGMT_PSK BIT(1)
+#define WPA_KEY_MGMT_NONE BIT(2)
+#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
+#define WPA_KEY_MGMT_WPA_NONE BIT(4)
+
+#define WPA_CAPABILITY_PREAUTH BIT(0)
+#define WPA_CAPABILITY_MGMT_FRAME_PROTECTION BIT(6)
+#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9)
+
+#define PMKID_LEN 16
+
+struct wpa_ie_hdr {
+ u8 elem_id;
+ u8 len;
+ u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
+ u8 version[2]; /* little endian */
+} __packed;
+
+struct rsn_ie_hdr {
+ u8 elem_id; /* WLAN_EID_RSN */
+ u8 len;
+ u8 version[2]; /* little endian */
+} __packed;
+
+struct wme_ac_parameter {
+#if defined(__LITTLE_ENDIAN)
+ /* byte 1 */
+ u8 aifsn:4,
+ acm:1,
+ aci:2,
+ reserved:1;
+
+ /* byte 2 */
+ u8 eCWmin:4,
+ eCWmax:4;
+#elif defined(__BIG_ENDIAN)
+ /* byte 1 */
+ u8 reserved:1,
+ aci:2,
+ acm:1,
+ aifsn:4;
+
+ /* byte 2 */
+ u8 eCWmax:4,
+ eCWmin:4;
+#else
+#error "Please fix <endian.h>"
+#endif
+
+ /* bytes 3 & 4 */
+ u16 txopLimit;
+} __packed;
+
+struct wme_parameter_element {
+ /* required fields for WME version 1 */
+ u8 oui[3];
+ u8 oui_type;
+ u8 oui_subtype;
+ u8 version;
+ u8 acInfo;
+ u8 reserved;
+ struct wme_ac_parameter ac[4];
+
+} __packed;
+
+#define WPA_PUT_LE16(a, val) \
+ do { \
+ (a)[1] = ((u16) (val)) >> 8; \
+ (a)[0] = ((u16) (val)) & 0xff; \
+ } while (0)
+
+#define WPA_PUT_BE32(a, val) \
+ do { \
+ (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[3] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define WPA_PUT_LE32(a, val) \
+ do { \
+ (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[0] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *)(a), (val))
+
+/* Action category code */
+enum ieee80211_category {
+ WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+ WLAN_CATEGORY_QOS = 1,
+ WLAN_CATEGORY_DLS = 2,
+ WLAN_CATEGORY_BACK = 3,
+ WLAN_CATEGORY_HT = 7,
+ WLAN_CATEGORY_WMM = 17,
+};
+
+/* SPECTRUM_MGMT action code */
+enum ieee80211_spectrum_mgmt_actioncode {
+ WLAN_ACTION_SPCT_MSR_REQ = 0,
+ WLAN_ACTION_SPCT_MSR_RPRT = 1,
+ WLAN_ACTION_SPCT_TPC_REQ = 2,
+ WLAN_ACTION_SPCT_TPC_RPRT = 3,
+ WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+ WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
+};
+
+/* BACK action code */
+enum ieee80211_back_actioncode {
+ WLAN_ACTION_ADDBA_REQ = 0,
+ WLAN_ACTION_ADDBA_RESP = 1,
+ WLAN_ACTION_DELBA = 2,
+};
+
+/* HT features action code */
+enum ieee80211_ht_actioncode {
+ WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
+ WLAN_ACTION_SM_PS = 1,
+ WLAN_ACTION_PSPM = 2,
+ WLAN_ACTION_PCO_PHASE = 3,
+ WLAN_ACTION_MIMO_CSI_MX = 4,
+ WLAN_ACTION_MIMO_NONCP_BF = 5,
+ WLAN_ACTION_MIMP_CP_BF = 6,
+ WLAN_ACTION_ASEL_INDICATES_FB = 7,
+ WLAN_ACTION_HI_INFO_EXCHG = 8,
+};
+
+/* BACK (block-ack) parties */
+enum ieee80211_back_parties {
+ WLAN_BACK_RECIPIENT = 0,
+ WLAN_BACK_INITIATOR = 1,
+ WLAN_BACK_TIMER = 2,
+};
+
+struct ieee80211_mgmt {
+ u16 frame_control;
+ u16 duration;
+ u8 da[6];
+ u8 sa[6];
+ u8 bssid[6];
+ u16 seq_ctrl;
+ union {
+ struct {
+ u16 auth_alg;
+ u16 auth_transaction;
+ u16 status_code;
+ /* possibly followed by Challenge text */
+ u8 variable[0];
+ } __packed auth;
+ struct {
+ u16 reason_code;
+ } __packed deauth;
+ struct {
+ u16 capab_info;
+ u16 listen_interval;
+ /* followed by SSID and Supported rates */
+ u8 variable[0];
+ } __packed assoc_req;
+ struct {
+ u16 capab_info;
+ u16 status_code;
+ u16 aid;
+ /* followed by Supported rates */
+ u8 variable[0];
+ } __packed assoc_resp, reassoc_resp;
+ struct {
+ u16 capab_info;
+ u16 listen_interval;
+ u8 current_ap[6];
+ /* followed by SSID and Supported rates */
+ u8 variable[0];
+ } __packed reassoc_req;
+ struct {
+ u16 reason_code;
+ } __packed disassoc;
+ struct {
+ __le64 timestamp;
+ u16 beacon_int;
+ u16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params, TIM */
+ u8 variable[0];
+ } __packed beacon;
+ struct {
+ /* only variable items: SSID, Supported rates */
+ u8 variable[0];
+ } __packed probe_req;
+ struct {
+ __le64 timestamp;
+ u16 beacon_int;
+ u16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params */
+ u8 variable[0];
+ } __packed probe_resp;
+ struct {
+ u8 category;
+ union {
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u8 status_code;
+ u8 variable[0];
+ } __packed wme_action;
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u16 capab;
+ u16 timeout;
+ u16 start_seq_num;
+ } __packed addba_req;
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u16 status;
+ u16 capab;
+ u16 timeout;
+ } __packed addba_resp;
+ struct {
+ u8 action_code;
+ u16 params;
+ u16 reason_code;
+ } __packed delba;
+ structi {
+ u8 action_code;
+ /* capab_info for open and confirm,
+ * reason for close
+ */
+ u16 aux;
+ /* Followed in plink_confirm by status
+ * code, AID and supported rates,
+ * and directly by supported rates in
+ * plink_open and plink_close
+ */
+ u8 variable[0];
+ } __packed plink_action;
+ struct{
+ u8 action_code;
+ u8 variable[0];
+ } __packed mesh_action;
+ } __packed u;
+ } __packed action;
+ } __packed u;
+} __packed;
+
+/* mgmt header + 1 byte category code */
+#define IEEE80211_MIN_ACTION_SIZE \
+ FIELD_OFFSET(struct ieee80211_mgmt, u.action.u)
+
+#endif
diff --git a/drivers/staging/r8188eu/include/if_ether.h b/drivers/staging/r8188eu/include/if_ether.h
new file mode 100644
index 000000000000..db157712a203
--- /dev/null
+++ b/drivers/staging/r8188eu/include/if_ether.h
@@ -0,0 +1,111 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _LINUX_IF_ETHER_H
+#define _LINUX_IF_ETHER_H
+
+/*
+ * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
+ * and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN 6 /* Octets in one ethernet addr */
+#define ETH_HLEN 14 /* Total octets in header. */
+#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN 1500 /* Max. octets in payload */
+#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
+
+/*
+ * These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
+#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
+#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
+#define ETH_P_IP 0x0800 /* Internet Protocol packet */
+#define ETH_P_X25 0x0805 /* CCITT X.25 */
+#define ETH_P_ARP 0x0806 /* Address Resolution packet */
+#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet */
+#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP */
+#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
+#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
+#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
+#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
+#define ETH_P_LAT 0x6004 /* DEC LAT */
+#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
+#define ETH_P_CUST 0x6006 /* DEC Customer use */
+#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
+#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
+#define ETH_P_ATALK 0x809B /* Appletalk DDP */
+#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
+#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
+#define ETH_P_IPX 0x8137 /* IPX over DIX */
+#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
+#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
+#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
+#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
+#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
+ * over Ethernet
+ */
+
+/*
+ * Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
+#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
+#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
+#define ETH_P_802_2 0x0004 /* 802.2 frames */
+#define ETH_P_SNAP 0x0005 /* Internal only */
+#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
+#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
+#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
+#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
+#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
+#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
+#define ETH_P_ECONET 0x0018 /* Acorn Econet */
+
+/*
+ * This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+ unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
+ unsigned char h_source[ETH_ALEN]; /* source ether addr */
+ unsigned short h_proto; /* packet type ID field */
+};
+
+struct _vlan {
+ unsigned short h_vlan_TCI; /* Encap prio and VLAN ID */
+ unsigned short h_vlan_encapsulated_proto;
+};
+
+#define get_vlan_id(pvlan) \
+ ((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
+#define get_vlan_priority(pvlan) \
+ ((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
+#define get_vlan_encap_proto(pvlan) \
+ (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
+
+#endif /* _LINUX_IF_ETHER_H */
diff --git a/drivers/staging/r8188eu/include/ioctl_cfg80211.h b/drivers/staging/r8188eu/include/ioctl_cfg80211.h
new file mode 100644
index 000000000000..037e9a5e5af9
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ioctl_cfg80211.h
@@ -0,0 +1,107 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IOCTL_CFG80211_H__
+#define __IOCTL_CFG80211_H__
+
+struct rtw_wdev_invit_info {
+ u8 token;
+ u8 flags;
+ u8 status;
+ u8 req_op_ch;
+ u8 rsp_op_ch;
+};
+
+#define rtw_wdev_invit_info_init(invit_info) \
+ do { \
+ (invit_info)->token = 0; \
+ (invit_info)->flags = 0x00; \
+ (invit_info)->status = 0xff; \
+ (invit_info)->req_op_ch = 0; \
+ (invit_info)->rsp_op_ch = 0; \
+ } while (0)
+
+struct rtw_wdev_priv {
+ struct wireless_dev *rtw_wdev;
+
+ struct adapter *padapter;
+
+ struct cfg80211_scan_request *scan_request;
+ spinlock_t scan_req_lock;
+
+ struct net_device *pmon_ndev;/* for monitor interface */
+ char ifname_mon[IFNAMSIZ + 1]; /* name of monitor interface */
+
+ u8 p2p_enabled;
+
+ u8 provdisc_req_issued;
+
+ struct rtw_wdev_invit_info invit_info;
+
+ u8 bandroid_scan;
+ bool block;
+ bool power_mgmt;
+};
+
+#define wdev_to_priv(w) ((struct rtw_wdev_priv *)(wdev_priv(w)))
+
+#define wiphy_to_wdev(x) \
+((struct wireless_dev *)(((struct rtw_wdev_priv *)wiphy_priv(x))->rtw_wdev))
+
+int rtw_wdev_alloc(struct adapter *padapter, struct device *dev);
+void rtw_wdev_free(struct wireless_dev *wdev);
+void rtw_wdev_unregister(struct wireless_dev *wdev);
+
+void rtw_cfg80211_init_wiphy(struct adapter *padapter);
+
+void rtw_cfg80211_surveydone_event_callback(struct adapter *padapter);
+
+void rtw_cfg80211_indicate_connect(struct adapter *padapter);
+void rtw_cfg80211_indicate_disconnect(struct adapter *padapter);
+void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv,
+ bool aborted);
+
+#ifdef CONFIG_88EU_AP_MODE
+void rtw_cfg80211_indicate_sta_assoc(struct adapter *padapter,
+ u8 *pmgmt_frame, uint frame_len);
+void rtw_cfg80211_indicate_sta_disassoc(struct adapter *padapter,
+ unsigned char *da,
+ unsigned short reason);
+#endif /* CONFIG_88EU_AP_MODE */
+
+void rtw_cfg80211_issue_p2p_provision_request(struct adapter *padapter,
+ const u8 *buf, size_t len);
+void rtw_cfg80211_rx_p2p_action_public(struct adapter *padapter,
+ u8 *pmgmt_frame, uint frame_len);
+void rtw_cfg80211_rx_action_p2p(struct adapter *padapter, u8 *pmgmt_frame,
+ uint frame_len);
+void rtw_cfg80211_rx_action(struct adapter *adapter, u8 *frame,
+ uint frame_len, const char *msg);
+
+int rtw_cfg80211_set_mgnt_wpsp2pie(struct net_device *net,
+ char *buf, int len, int type);
+
+bool rtw_cfg80211_pwr_mgmt(struct adapter *adapter);
+
+#define rtw_cfg80211_rx_mgmt(dev, freq, sig_dbm, buf, len, gfp) \
+ cfg80211_rx_mgmt(dev, freq, sig_dbm, buf, len, gfp)
+#define rtw_cfg80211_send_rx_assoc(dev, bss, buf, len) \
+ cfg80211_send_rx_assoc(dev, bss, buf, len)
+
+#endif /* __IOCTL_CFG80211_H__ */
diff --git a/drivers/staging/r8188eu/include/ip.h b/drivers/staging/r8188eu/include/ip.h
new file mode 100644
index 000000000000..0107ac15c6ed
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ip.h
@@ -0,0 +1,125 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _LINUX_IP_H
+#define _LINUX_IP_H
+
+/* SOL_IP socket options */
+
+#define IPTOS_TOS_MASK 0x1E
+#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
+#define IPTOS_LOWDELAY 0x10
+#define IPTOS_THROUGHPUT 0x08
+#define IPTOS_RELIABILITY 0x04
+#define IPTOS_MINCOST 0x02
+
+#define IPTOS_PREC_MASK 0xE0
+#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL 0xe0
+#define IPTOS_PREC_INTERNETCONTROL 0xc0
+#define IPTOS_PREC_CRITIC_ECP 0xa0
+#define IPTOS_PREC_FLASHOVERRIDE 0x80
+#define IPTOS_PREC_FLASH 0x60
+#define IPTOS_PREC_IMMEDIATE 0x40
+#define IPTOS_PREC_PRIORITY 0x20
+#define IPTOS_PREC_ROUTINE 0x00
+
+/* IP options */
+#define IPOPT_COPY 0x80
+#define IPOPT_CLASS_MASK 0x60
+#define IPOPT_NUMBER_MASK 0x1f
+
+#define IPOPT_COPIED(o) ((o)&IPOPT_COPY)
+#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK)
+#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK)
+
+#define IPOPT_CONTROL 0x00
+#define IPOPT_RESERVED1 0x20
+#define IPOPT_MEASUREMENT 0x40
+#define IPOPT_RESERVED2 0x60
+
+#define IPOPT_END (0 | IPOPT_CONTROL)
+#define IPOPT_NOOP (1 | IPOPT_CONTROL)
+#define IPOPT_SEC (2 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_LSRR (3 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_TIMESTAMP (4 | IPOPT_MEASUREMENT)
+#define IPOPT_RR (7 | IPOPT_CONTROL)
+#define IPOPT_SID (8 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_SSRR (9 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_RA (20 | IPOPT_CONTROL | IPOPT_COPY)
+
+#define IPVERSION 4
+#define MAXTTL 255
+#define IPDEFTTL 64
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN 1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS IPOPT_TIMESTAMP
+
+#define IPOPT_TS_TSONLY 0 /* timestamps only */
+#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */
+#define IPOPT_TS_PRESPEC 3 /* specified modules only */
+
+struct ip_options {
+ __u32 faddr; /* Saved first hop address */
+ unsigned char optlen;
+ unsigned char srr;
+ unsigned char rr;
+ unsigned char ts;
+ unsigned char is_setbyuser:1, /* Set by setsockopt? */
+ is_data:1, /* Options in __data, rather than skb*/
+ is_strictroute:1,/* Strict source route */
+ srr_is_hit:1, /* Packet destn addr was ours */
+ is_changed:1, /* IP checksum more not valid */
+ rr_needaddr:1, /* Need to record addr of out dev*/
+ ts_needtime:1, /* Need to record timestamp */
+ ts_needaddr:1; /* Need to record addr of out dev */
+ unsigned char router_alert;
+ unsigned char __pad1;
+ unsigned char __pad2;
+ unsigned char __data[0];
+};
+
+#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 ihl:4,
+ version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u8 version:4,
+ ihl:4;
+#endif
+ __u8 tos;
+ __u16 tot_len;
+ __u16 id;
+ __u16 frag_off;
+ __u8 ttl;
+ __u8 protocol;
+ __u16 check;
+ __u32 saddr;
+ __u32 daddr;
+ /*The options start here. */
+};
+
+#endif /* _LINUX_IP_H */
diff --git a/drivers/staging/r8188eu/include/mlme_osdep.h b/drivers/staging/r8188eu/include/mlme_osdep.h
new file mode 100644
index 000000000000..ae1722c67032
--- /dev/null
+++ b/drivers/staging/r8188eu/include/mlme_osdep.h
@@ -0,0 +1,35 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __MLME_OSDEP_H_
+#define __MLME_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+void rtw_init_mlme_timer(struct adapter *padapter);
+void rtw_os_indicate_disconnect(struct adapter *adapter);
+void rtw_os_indicate_connect(struct adapter *adapter);
+void rtw_os_indicate_scan_done(struct adapter *padapter, bool aborted);
+void rtw_report_sec_ie(struct adapter *adapter, u8 authmode, u8 *sec_ie);
+
+void rtw_reset_securitypriv(struct adapter *adapter);
+void indicate_wx_scan_complete_event(struct adapter *padapter);
+
+#endif /* _MLME_OSDEP_H_ */
diff --git a/drivers/staging/r8188eu/include/mp_custom_oid.h b/drivers/staging/r8188eu/include/mp_custom_oid.h
new file mode 100644
index 000000000000..be4f11864f63
--- /dev/null
+++ b/drivers/staging/r8188eu/include/mp_custom_oid.h
@@ -0,0 +1,349 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __CUSTOM_OID_H
+#define __CUSTOM_OID_H
+
+/* by Owen */
+/* 0xFF818000 - 0xFF81802F RTL8180 Mass Production Kit */
+/* 0xFF818500 - 0xFF81850F RTL8185 Setup Utility */
+/* 0xFF818580 - 0xFF81858F RTL8185 Phy Status Utility */
+
+/* */
+
+/* by Owen for Production Kit */
+/* For Production Kit with Agilent Equipments */
+/* in order to make our custom oids hopefully somewhat unique */
+/* we will use 0xFF (indicating implementation specific OID) */
+/* 81(first byte of non zero Realtek unique identifier) */
+/* 80 (second byte of non zero Realtek unique identifier) */
+/* XX (the custom OID number - providing 255 possible custom oids) */
+
+#define OID_RT_PRO_RESET_DUT 0xFF818000
+#define OID_RT_PRO_SET_DATA_RATE 0xFF818001
+#define OID_RT_PRO_START_TEST 0xFF818002
+#define OID_RT_PRO_STOP_TEST 0xFF818003
+#define OID_RT_PRO_SET_PREAMBLE 0xFF818004
+#define OID_RT_PRO_SET_SCRAMBLER 0xFF818005
+#define OID_RT_PRO_SET_FILTER_BB 0xFF818006
+#define OID_RT_PRO_SET_MANUAL_DIVERSITY_BB 0xFF818007
+#define OID_RT_PRO_SET_CHANNEL_DIRECT_CALL 0xFF818008
+#define OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL 0xFF818009
+#define OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL 0xFF81800A
+
+#define OID_RT_PRO_SET_TX_ANTENNA_BB 0xFF81800D
+#define OID_RT_PRO_SET_ANTENNA_BB 0xFF81800E
+#define OID_RT_PRO_SET_CR_SCRAMBLER 0xFF81800F
+#define OID_RT_PRO_SET_CR_NEW_FILTER 0xFF818010
+#define OID_RT_PRO_SET_TX_POWER_CONTROL 0xFF818011
+#define OID_RT_PRO_SET_CR_TX_CONFIG 0xFF818012
+#define OID_RT_PRO_GET_TX_POWER_CONTROL 0xFF818013
+#define OID_RT_PRO_GET_CR_SIGNAL_QUALITY 0xFF818014
+#define OID_RT_PRO_SET_CR_SETPOINT 0xFF818015
+#define OID_RT_PRO_SET_INTEGRATOR 0xFF818016
+#define OID_RT_PRO_SET_SIGNAL_QUALITY 0xFF818017
+#define OID_RT_PRO_GET_INTEGRATOR 0xFF818018
+#define OID_RT_PRO_GET_SIGNAL_QUALITY 0xFF818019
+#define OID_RT_PRO_QUERY_EEPROM_TYPE 0xFF81801A
+#define OID_RT_PRO_WRITE_MAC_ADDRESS 0xFF81801B
+#define OID_RT_PRO_READ_MAC_ADDRESS 0xFF81801C
+#define OID_RT_PRO_WRITE_CIS_DATA 0xFF81801D
+#define OID_RT_PRO_READ_CIS_DATA 0xFF81801E
+#define OID_RT_PRO_WRITE_POWER_CONTROL 0xFF81801F
+#define OID_RT_PRO_READ_POWER_CONTROL 0xFF818020
+#define OID_RT_PRO_WRITE_EEPROM 0xFF818021
+#define OID_RT_PRO_READ_EEPROM 0xFF818022
+#define OID_RT_PRO_RESET_TX_PACKET_SENT 0xFF818023
+#define OID_RT_PRO_QUERY_TX_PACKET_SENT 0xFF818024
+#define OID_RT_PRO_RESET_RX_PACKET_RECEIVED 0xFF818025
+#define OID_RT_PRO_QUERY_RX_PACKET_RECEIVED 0xFF818026
+#define OID_RT_PRO_QUERY_RX_PACKET_CRC32_ERROR 0xFF818027
+#define OID_RT_PRO_QUERY_CURRENT_ADDRESS 0xFF818028
+#define OID_RT_PRO_QUERY_PERMANENT_ADDRESS 0xFF818029
+#define OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS 0xFF81802A
+#define OID_RT_PRO_RECEIVE_PACKET 0xFF81802C
+/* added by Owen on 04/08/03 for Cameo's request */
+#define OID_RT_PRO_WRITE_EEPROM_BYTE 0xFF81802D
+#define OID_RT_PRO_READ_EEPROM_BYTE 0xFF81802E
+#define OID_RT_PRO_SET_MODULATION 0xFF81802F
+/* */
+
+/* Sean */
+#define OID_RT_DRIVER_OPTION 0xFF818080
+#define OID_RT_RF_OFF 0xFF818081
+#define OID_RT_AUTH_STATUS 0xFF818082
+
+/* */
+#define OID_RT_PRO_SET_CONTINUOUS_TX 0xFF81800B
+#define OID_RT_PRO_SET_SINGLE_CARRIER_TX 0xFF81800C
+#define OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX 0xFF81802B
+#define OID_RT_PRO_SET_SINGLE_TONE_TX 0xFF818043
+/* */
+
+/* by Owen for RTL8185 Phy Status Report Utility */
+#define OID_RT_UTILITY_false_ALARM_COUNTERS 0xFF818580
+#define OID_RT_UTILITY_SELECT_DEBUG_MODE 0xFF818581
+#define OID_RT_UTILITY_SELECT_SUBCARRIER_NUMBER 0xFF818582
+#define OID_RT_UTILITY_GET_RSSI_STATUS 0xFF818583
+#define OID_RT_UTILITY_GET_FRAME_DETECTION_STATUS 0xFF818584
+#define OID_RT_UTILITY_GET_AGC_AND_FREQUENCY_OFFSET_ESTIMATION_STATUS \
+ 0xFF818585
+#define OID_RT_UTILITY_GET_CHANNEL_ESTIMATION_STATUS 0xFF818586
+/* */
+
+/* by Owen on 03/09/19-03/09/22 for RTL8185 */
+#define OID_RT_WIRELESS_MODE 0xFF818500
+#define OID_RT_SUPPORTED_RATES 0xFF818501
+#define OID_RT_DESIRED_RATES 0xFF818502
+#define OID_RT_WIRELESS_MODE_STARTING_ADHOC 0xFF818503
+/* */
+
+#define OID_RT_GET_CONNECT_STATE 0xFF030001
+#define OID_RT_RESCAN 0xFF030002
+#define OID_RT_SET_KEY_LENGTH 0xFF030003
+#define OID_RT_SET_DEFAULT_KEY_ID 0xFF030004
+
+#define OID_RT_SET_CHANNEL 0xFF010182
+#define OID_RT_SET_SNIFFER_MODE 0xFF010183
+#define OID_RT_GET_SIGNAL_QUALITY 0xFF010184
+#define OID_RT_GET_SMALL_PACKET_CRC 0xFF010185
+#define OID_RT_GET_MIDDLE_PACKET_CRC 0xFF010186
+#define OID_RT_GET_LARGE_PACKET_CRC 0xFF010187
+#define OID_RT_GET_TX_RETRY 0xFF010188
+#define OID_RT_GET_RX_RETRY 0xFF010189
+#define OID_RT_PRO_SET_FW_DIG_STATE 0xFF01018A/* S */
+#define OID_RT_PRO_SET_FW_RA_STATE 0xFF01018B/* S */
+
+#define OID_RT_GET_RX_TOTAL_PACKET 0xFF010190
+#define OID_RT_GET_TX_BEACON_OK 0xFF010191
+#define OID_RT_GET_TX_BEACON_ERR 0xFF010192
+#define OID_RT_GET_RX_ICV_ERR 0xFF010193
+#define OID_RT_SET_ENCRYPTION_ALGORITHM 0xFF010194
+#define OID_RT_SET_NO_AUTO_RESCAN 0xFF010195
+#define OID_RT_GET_PREAMBLE_MODE 0xFF010196
+#define OID_RT_GET_DRIVER_UP_DELTA_TIME 0xFF010197
+#define OID_RT_GET_AP_IP 0xFF010198
+#define OID_RT_GET_CHANNELPLAN 0xFF010199
+#define OID_RT_SET_PREAMBLE_MODE 0xFF01019A
+#define OID_RT_SET_BCN_INTVL 0xFF01019B
+#define OID_RT_GET_RF_VENDER 0xFF01019C
+#define OID_RT_DEDICATE_PROBE 0xFF01019D
+#define OID_RT_PRO_RX_FILTER_PATTERN 0xFF01019E
+
+#define OID_RT_GET_DCST_CURRENT_THRESHOLD 0xFF01019F
+
+#define OID_RT_GET_CCA_ERR 0xFF0101A0
+#define OID_RT_GET_CCA_UPGRADE_THRESHOLD 0xFF0101A1
+#define OID_RT_GET_CCA_FALLBACK_THRESHOLD 0xFF0101A2
+
+#define OID_RT_GET_CCA_UPGRADE_EVALUATE_TIMES 0xFF0101A3
+#define OID_RT_GET_CCA_FALLBACK_EVALUATE_TIMES 0xFF0101A4
+
+/* by Owen on 03/31/03 for Cameo's request */
+#define OID_RT_SET_RATE_ADAPTIVE 0xFF0101A5
+/* */
+#define OID_RT_GET_DCST_EVALUATE_PERIOD 0xFF0101A5
+#define OID_RT_GET_DCST_TIME_UNIT_INDEX 0xFF0101A6
+#define OID_RT_GET_TOTAL_TX_BYTES 0xFF0101A7
+#define OID_RT_GET_TOTAL_RX_BYTES 0xFF0101A8
+#define OID_RT_CURRENT_TX_POWER_LEVEL 0xFF0101A9
+#define OID_RT_GET_ENC_KEY_MISMATCH_COUNT 0xFF0101AA
+#define OID_RT_GET_ENC_KEY_MATCH_COUNT 0xFF0101AB
+#define OID_RT_GET_CHANNEL 0xFF0101AC
+
+#define OID_RT_SET_CHANNELPLAN 0xFF0101AD
+#define OID_RT_GET_HARDWARE_RADIO_OFF 0xFF0101AE
+#define OID_RT_CHANNELPLAN_BY_COUNTRY 0xFF0101AF
+#define OID_RT_SCAN_AVAILABLE_BSSID 0xFF0101B0
+#define OID_RT_GET_HARDWARE_VERSION 0xFF0101B1
+#define OID_RT_GET_IS_ROAMING 0xFF0101B2
+#define OID_RT_GET_IS_PRIVACY 0xFF0101B3
+#define OID_RT_GET_KEY_MISMATCH 0xFF0101B4
+#define OID_RT_SET_RSSI_ROAM_TRAFFIC_TH 0xFF0101B5
+#define OID_RT_SET_RSSI_ROAM_SIGNAL_TH 0xFF0101B6
+#define OID_RT_RESET_LOG 0xFF0101B7
+#define OID_RT_GET_LOG 0xFF0101B8
+#define OID_RT_SET_INDICATE_HIDDEN_AP 0xFF0101B9
+#define OID_RT_GET_HEADER_FAIL 0xFF0101BA
+#define OID_RT_SUPPORTED_WIRELESS_MODE 0xFF0101BB
+#define OID_RT_GET_CHANNEL_LIST 0xFF0101BC
+#define OID_RT_GET_SCAN_IN_PROGRESS 0xFF0101BD
+#define OID_RT_GET_TX_INFO 0xFF0101BE
+#define OID_RT_RF_READ_WRITE_OFFSET 0xFF0101BF
+#define OID_RT_RF_READ_WRITE 0xFF0101C0
+
+/* For Netgear request. 2005.01.13, by rcnjko. */
+#define OID_RT_FORCED_DATA_RATE 0xFF0101C1
+#define OID_RT_WIRELESS_MODE_FOR_SCAN_LIST 0xFF0101C2
+/* For Netgear request. 2005.02.17, by rcnjko. */
+#define OID_RT_GET_BSS_WIRELESS_MODE 0xFF0101C3
+/* For AZ project. 2005.06.27, by rcnjko. */
+#define OID_RT_SCAN_WITH_MAGIC_PACKET 0xFF0101C4
+
+/* Vincent 8185MP */
+#define OID_RT_PRO_RX_FILTER 0xFF0111C0
+
+#define OID_CE_USB_WRITE_REGISTRY 0xFF0111C1
+#define OID_CE_USB_READ_REGISTRY 0xFF0111C2
+
+#define OID_RT_PRO_SET_INITIAL_GA 0xFF0111C3
+#define OID_RT_PRO_SET_BB_RF_STANDBY_MODE 0xFF0111C4
+#define OID_RT_PRO_SET_BB_RF_SHUTDOWN_MODE 0xFF0111C5
+#define OID_RT_PRO_SET_TX_CHARGE_PUMP 0xFF0111C6
+#define OID_RT_PRO_SET_RX_CHARGE_PUMP 0xFF0111C7
+#define OID_RT_PRO_RF_WRITE_REGISTRY 0xFF0111C8
+#define OID_RT_PRO_RF_READ_REGISTRY 0xFF0111C9
+#define OID_RT_PRO_QUERY_RF_TYPE 0xFF0111CA
+
+/* AP OID */
+#define OID_RT_AP_GET_ASSOCIATED_STATION_LIST 0xFF010300
+#define OID_RT_AP_GET_CURRENT_TIME_STAMP 0xFF010301
+#define OID_RT_AP_SWITCH_INTO_AP_MODE 0xFF010302
+#define OID_RT_AP_SET_DTIM_PERIOD 0xFF010303
+/* Determine if driver supports AP mode. */
+#define OID_RT_AP_SUPPORTED 0xFF010304
+/* Set WPA-PSK passphrase into authenticator. */
+#define OID_RT_AP_SET_PASSPHRASE 0xFF010305
+
+/* 8187MP. 2004.09.06, by rcnjko. */
+#define OID_RT_PRO8187_WI_POLL 0xFF818780
+#define OID_RT_PRO_WRITE_BB_REG 0xFF818781
+#define OID_RT_PRO_READ_BB_REG 0xFF818782
+#define OID_RT_PRO_WRITE_RF_REG 0xFF818783
+#define OID_RT_PRO_READ_RF_REG 0xFF818784
+
+/* Meeting House. added by Annie, 2005-07-20. */
+#define OID_RT_MH_VENDER_ID 0xFFEDC100
+
+/* 8711 MP OID added 20051230. */
+#define OID_RT_PRO8711_JOIN_BSS 0xFF871100/* S */
+
+#define OID_RT_PRO_READ_REGISTER 0xFF871101 /* Q */
+#define OID_RT_PRO_WRITE_REGISTER 0xFF871102 /* S */
+
+#define OID_RT_PRO_BURST_READ_REGISTER 0xFF871103 /* Q */
+#define OID_RT_PRO_BURST_WRITE_REGISTER 0xFF871104 /* S */
+
+#define OID_RT_PRO_WRITE_TXCMD 0xFF871105 /* S */
+
+#define OID_RT_PRO_READ16_EEPROM 0xFF871106 /* Q */
+#define OID_RT_PRO_WRITE16_EEPROM 0xFF871107 /* S */
+
+#define OID_RT_PRO_H2C_SET_COMMAND 0xFF871108 /* S */
+#define OID_RT_PRO_H2C_QUERY_RESULT 0xFF871109 /* Q */
+
+#define OID_RT_PRO8711_WI_POLL 0xFF87110A /* Q */
+#define OID_RT_PRO8711_PKT_LOSS 0xFF87110B /* Q */
+#define OID_RT_RD_ATTRIB_MEM 0xFF87110C/* Q */
+#define OID_RT_WR_ATTRIB_MEM 0xFF87110D/* S */
+
+/* Method 2 for H2C/C2H */
+#define OID_RT_PRO_H2C_CMD_MODE 0xFF871110 /* S */
+#define OID_RT_PRO_H2C_CMD_RSP_MODE 0xFF871111 /* Q */
+#define OID_RT_PRO_H2C_CMD_EVENT_MODE 0xFF871112 /* S */
+#define OID_RT_PRO_WAIT_C2H_EVENT 0xFF871113 /* Q */
+#define OID_RT_PRO_RW_ACCESS_PROTOCOL_TEST 0xFF871114/* Q */
+
+#define OID_RT_PRO_SCSI_ACCESS_TEST 0xFF871115 /* Q, S */
+
+#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_OUT 0xFF871116 /* S */
+#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_IN 0xFF871117 /* Q,S */
+#define OID_RT_RRO_RX_PKT_VIA_IOCTRL 0xFF871118 /* Q */
+#define OID_RT_RRO_RX_PKTARRAY_VIA_IOCTRL 0xFF871119 /* Q */
+
+#define OID_RT_RPO_SET_PWRMGT_TEST 0xFF87111A /* S */
+#define OID_RT_PRO_QRY_PWRMGT_TEST 0XFF87111B /* Q */
+#define OID_RT_RPO_ASYNC_RWIO_TEST 0xFF87111C /* S */
+#define OID_RT_RPO_ASYNC_RWIO_POLL 0xFF87111D /* Q */
+#define OID_RT_PRO_SET_RF_INTFS 0xFF87111E /* S */
+#define OID_RT_POLL_RX_STATUS 0xFF87111F /* Q */
+
+#define OID_RT_PRO_CFG_DEBUG_MESSAGE 0xFF871120 /* Q,S */
+#define OID_RT_PRO_SET_DATA_RATE_EX 0xFF871121/* S */
+#define OID_RT_PRO_SET_BASIC_RATE 0xFF871122/* S */
+#define OID_RT_PRO_READ_TSSI 0xFF871123/* S */
+#define OID_RT_PRO_SET_POWER_TRACKING 0xFF871124/* S */
+
+#define OID_RT_PRO_QRY_PWRSTATE 0xFF871150 /* Q */
+#define OID_RT_PRO_SET_PWRSTATE 0xFF871151 /* S */
+
+/* Method 2 , using workitem */
+#define OID_RT_SET_READ_REG 0xFF871181 /* S */
+#define OID_RT_SET_WRITE_REG 0xFF871182 /* S */
+#define OID_RT_SET_BURST_READ_REG 0xFF871183 /* S */
+#define OID_RT_SET_BURST_WRITE_REG 0xFF871184 /* S */
+#define OID_RT_SET_WRITE_TXCMD 0xFF871185 /* S */
+#define OID_RT_SET_READ16_EEPROM 0xFF871186 /* S */
+#define OID_RT_SET_WRITE16_EEPROM 0xFF871187 /* S */
+#define OID_RT_QRY_POLL_WKITEM 0xFF871188 /* Q */
+
+/* For SDIO INTERFACE only */
+#define OID_RT_PRO_SYNCPAGERW_SRAM 0xFF8711A0 /* Q, S */
+#define OID_RT_PRO_871X_DRV_EXT 0xFF8711A1
+
+/* For USB INTERFACE only */
+#define OID_RT_PRO_USB_VENDOR_REQ 0xFF8711B0 /* Q, S */
+#define OID_RT_PRO_SCSI_AUTO_TEST 0xFF8711B1 /* S */
+#define OID_RT_PRO_USB_MAC_AC_FIFO_WRITE 0xFF8711B2 /* S */
+#define OID_RT_PRO_USB_MAC_RX_FIFO_READ 0xFF8711B3 /* Q */
+#define OID_RT_PRO_USB_MAC_RX_FIFO_POLLING 0xFF8711B4 /* Q */
+
+#define OID_RT_PRO_H2C_SET_RATE_TABLE 0xFF8711FB /* S */
+#define OID_RT_PRO_H2C_GET_RATE_TABLE 0xFF8711FC /* S */
+#define OID_RT_PRO_H2C_C2H_LBK_TEST 0xFF8711FE
+
+#define OID_RT_PRO_ENCRYPTION_CTRL 0xFF871200 /* Q, S */
+#define OID_RT_PRO_ADD_STA_INFO 0xFF871201 /* S */
+#define OID_RT_PRO_DELE_STA_INFO 0xFF871202 /* S */
+#define OID_RT_PRO_QUERY_DR_VARIABLE 0xFF871203 /* Q */
+
+#define OID_RT_PRO_RX_PACKET_TYPE 0xFF871204 /* Q, S */
+
+#define OID_RT_PRO_READ_EFUSE 0xFF871205 /* Q */
+#define OID_RT_PRO_WRITE_EFUSE 0xFF871206 /* S */
+#define OID_RT_PRO_RW_EFUSE_PGPKT 0xFF871207 /* Q, S */
+#define OID_RT_GET_EFUSE_CURRENT_SIZE 0xFF871208 /* Q */
+
+#define OID_RT_SET_BANDWIDTH 0xFF871209 /* S */
+#define OID_RT_SET_CRYSTAL_CAP 0xFF87120A /* S */
+
+#define OID_RT_SET_RX_PACKET_TYPE 0xFF87120B /* S */
+
+#define OID_RT_GET_EFUSE_MAX_SIZE 0xFF87120C /* Q */
+
+#define OID_RT_PRO_SET_TX_AGC_OFFSET 0xFF87120D /* S */
+
+#define OID_RT_PRO_SET_PKT_TEST_MODE 0xFF87120E /* S */
+
+#define OID_RT_PRO_FOR_EVM_TEST_SETTING 0xFF87120F /* S */
+
+#define OID_RT_PRO_GET_THERMAL_METER 0xFF871210 /* Q */
+
+#define OID_RT_RESET_PHY_RX_PACKET_COUNT 0xFF871211 /* S */
+#define OID_RT_GET_PHY_RX_PACKET_RECEIVED 0xFF871212 /* Q */
+#define OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR 0xFF871213 /* Q */
+
+#define OID_RT_SET_POWER_DOWN 0xFF871214 /* S */
+
+#define OID_RT_GET_POWER_MODE 0xFF871215 /* Q */
+
+#define OID_RT_PRO_EFUSE 0xFF871216 /* Q, S */
+#define OID_RT_PRO_EFUSE_MAP 0xFF871217 /* Q, S */
+
+#endif /* ifndef __CUSTOM_OID_H */
diff --git a/drivers/staging/r8188eu/include/nic_spec.h b/drivers/staging/r8188eu/include/nic_spec.h
new file mode 100644
index 000000000000..cee6f06a4570
--- /dev/null
+++ b/drivers/staging/r8188eu/include/nic_spec.h
@@ -0,0 +1,41 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __NIC_SPEC_H__
+#define __NIC_SPEC_H__
+
+#define RTL8711_MCTRL_ (0x20000)
+#define RTL8711_UART_ (0x30000)
+#define RTL8711_TIMER_ (0x40000)
+#define RTL8711_FINT_ (0x50000)
+#define RTL8711_HINT_ (0x50000)
+#define RTL8711_GPIO_ (0x60000)
+#define RTL8711_WLANCTRL_ (0x200000)
+#define RTL8711_WLANFF_ (0xe00000)
+#define RTL8711_HCICTRL_ (0x600000)
+#define RTL8711_SYSCFG_ (0x620000)
+#define RTL8711_SYSCTRL_ (0x620000)
+#define RTL8711_MCCTRL_ (0x020000)
+
+#include <rtl8711_regdef.h>
+
+#include <rtl8711_bitdef.h>
+
+#endif /* __RTL8711_SPEC_H__ */
diff --git a/drivers/staging/r8188eu/include/odm.h b/drivers/staging/r8188eu/include/odm.h
new file mode 100644
index 000000000000..61836c32123f
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm.h
@@ -0,0 +1,1182 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HALDMOUTSRC_H__
+#define __HALDMOUTSRC_H__
+
+/* Definition */
+/* Define all team support ability. */
+
+/* Define for all teams. Please Define the constant in your precomp header. */
+
+/* define DM_ODM_SUPPORT_AP 0 */
+/* define DM_ODM_SUPPORT_ADSL 0 */
+/* define DM_ODM_SUPPORT_CE 0 */
+/* define DM_ODM_SUPPORT_MP 1 */
+
+/* Define ODM SW team support flag. */
+
+/* Antenna Switch Relative Definition. */
+
+/* Add new function SwAntDivCheck8192C(). */
+/* This is the main function of Antenna diversity function before link. */
+/* Mainly, it just retains last scan result and scan again. */
+/* After that, it compares the scan result to see which one gets better
+ * RSSI. It selects antenna with better receiving power and returns better
+ * scan result. */
+
+#define TP_MODE 0
+#define RSSI_MODE 1
+#define TRAFFIC_LOW 0
+#define TRAFFIC_HIGH 1
+
+/* 3 Tx Power Tracking */
+/* 3============================================================ */
+#define DPK_DELTA_MAPPING_NUM 13
+#define index_mapping_HP_NUM 15
+
+/* */
+/* 3 PSD Handler */
+/* 3============================================================ */
+
+#define AFH_PSD 1 /* 0:normal PSD scan, 1: only do 20 pts PSD */
+#define MODE_40M 0 /* 0:20M, 1:40M */
+#define PSD_TH2 3
+#define PSD_CHM 20 /* Minimum channel number for BT AFH */
+#define SIR_STEP_SIZE 3
+#define Smooth_Size_1 5
+#define Smooth_TH_1 3
+#define Smooth_Size_2 10
+#define Smooth_TH_2 4
+#define Smooth_Size_3 20
+#define Smooth_TH_3 4
+#define Smooth_Step_Size 5
+#define Adaptive_SIR 1
+#define PSD_RESCAN 4
+#define PSD_SCAN_INTERVAL 700 /* ms */
+
+/* 8723A High Power IGI Setting */
+#define DM_DIG_HIGH_PWR_IGI_LOWER_BOUND 0x22
+#define DM_DIG_Gmode_HIGH_PWR_IGI_LOWER_BOUND 0x28
+#define DM_DIG_HIGH_PWR_THRESHOLD 0x3a
+
+/* LPS define */
+#define DM_DIG_FA_TH0_LPS 4 /* 4 in lps */
+#define DM_DIG_FA_TH1_LPS 15 /* 15 lps */
+#define DM_DIG_FA_TH2_LPS 30 /* 30 lps */
+#define RSSI_OFFSET_DIG 0x05;
+
+/* ANT Test */
+#define ANTTESTALL 0x00 /* Ant A or B will be Testing */
+#define ANTTESTA 0x01 /* Ant A will be Testing */
+#define ANTTESTB 0x02 /* Ant B will be testing */
+
+/* structure and define */
+
+/* Add for AP/ADSLpseudo DM structuer requirement. */
+/* We need to remove to other position??? */
+struct rtl8192cd_priv {
+ u8 temp;
+};
+
+struct rtw_dig {
+ u8 Dig_Enable_Flag;
+ u8 Dig_Ext_Port_Stage;
+
+ int RssiLowThresh;
+ int RssiHighThresh;
+
+ u32 FALowThresh;
+ u32 FAHighThresh;
+
+ u8 CurSTAConnectState;
+ u8 PreSTAConnectState;
+ u8 CurMultiSTAConnectState;
+
+ u8 PreIGValue;
+ u8 CurIGValue;
+ u8 BackupIGValue;
+
+ s8 BackoffVal;
+ s8 BackoffVal_range_max;
+ s8 BackoffVal_range_min;
+ u8 rx_gain_range_max;
+ u8 rx_gain_range_min;
+ u8 Rssi_val_min;
+
+ u8 PreCCK_CCAThres;
+ u8 CurCCK_CCAThres;
+ u8 PreCCKPDState;
+ u8 CurCCKPDState;
+
+ u8 LargeFAHit;
+ u8 ForbiddenIGI;
+ u32 Recover_cnt;
+
+ u8 DIG_Dynamic_MIN_0;
+ u8 DIG_Dynamic_MIN_1;
+ bool bMediaConnect_0;
+ bool bMediaConnect_1;
+
+ u32 AntDiv_RSSI_max;
+ u32 RSSI_max;
+};
+
+struct rtl_ps {
+ u8 PreCCAState;
+ u8 CurCCAState;
+
+ u8 PreRFState;
+ u8 CurRFState;
+
+ int Rssi_val_min;
+
+ u8 initialize;
+ u32 Reg874,RegC70,Reg85C,RegA74;
+
+};
+
+struct false_alarm_stats {
+ u32 Cnt_Parity_Fail;
+ u32 Cnt_Rate_Illegal;
+ u32 Cnt_Crc8_fail;
+ u32 Cnt_Mcs_fail;
+ u32 Cnt_Ofdm_fail;
+ u32 Cnt_Cck_fail;
+ u32 Cnt_all;
+ u32 Cnt_Fast_Fsync;
+ u32 Cnt_SB_Search_fail;
+ u32 Cnt_OFDM_CCA;
+ u32 Cnt_CCK_CCA;
+ u32 Cnt_CCA_all;
+ u32 Cnt_BW_USC; /* Gary */
+ u32 Cnt_BW_LSC; /* Gary */
+};
+
+struct dyn_primary_cca {
+ u8 PriCCA_flag;
+ u8 intf_flag;
+ u8 intf_type;
+ u8 DupRTS_flag;
+ u8 Monitor_flag;
+};
+
+struct rx_hpc {
+ u8 RXHP_flag;
+ u8 PSD_func_trigger;
+ u8 PSD_bitmap_RXHP[80];
+ u8 Pre_IGI;
+ u8 Cur_IGI;
+ u8 Pre_pw_th;
+ u8 Cur_pw_th;
+ bool First_time_enter;
+ bool RXHP_enable;
+ u8 TP_Mode;
+ struct timer_list PSDTimer;
+};
+
+#define ASSOCIATE_ENTRY_NUM 32 /* Max size of AsocEntry[]. */
+#define ODM_ASSOCIATE_ENTRY_NUM ASSOCIATE_ENTRY_NUM
+
+/* This indicates two different steps. */
+/* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to
+ * the signal on the air. */
+/* In SWAW_STEP_DETERMINE, driver just compares the signal captured in
+ * SWAW_STEP_PEAK with original RSSI to determine if it is necessary to
+ * switch antenna. */
+
+#define SWAW_STEP_PEAK 0
+#define SWAW_STEP_DETERMINE 1
+
+#define TP_MODE 0
+#define RSSI_MODE 1
+#define TRAFFIC_LOW 0
+#define TRAFFIC_HIGH 1
+
+struct sw_ant_switch {
+ u8 try_flag;
+ s32 PreRSSI;
+ u8 CurAntenna;
+ u8 PreAntenna;
+ u8 RSSI_Trying;
+ u8 TestMode;
+ u8 bTriggerAntennaSwitch;
+ u8 SelectAntennaMap;
+ u8 RSSI_target;
+
+ /* Before link Antenna Switch check */
+ u8 SWAS_NoLink_State;
+ u32 SWAS_NoLink_BK_Reg860;
+ bool ANTA_ON; /* To indicate Ant A is or not */
+ bool ANTB_ON; /* To indicate Ant B is on or not */
+
+ s32 RSSI_sum_A;
+ s32 RSSI_sum_B;
+ s32 RSSI_cnt_A;
+ s32 RSSI_cnt_B;
+ u64 lastTxOkCnt;
+ u64 lastRxOkCnt;
+ u64 TXByteCnt_A;
+ u64 TXByteCnt_B;
+ u64 RXByteCnt_A;
+ u64 RXByteCnt_B;
+ u8 TrafficLoad;
+ struct timer_list SwAntennaSwitchTimer;
+ /* Hybrid Antenna Diversity */
+ u32 CCK_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
+ u32 CCK_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
+ u32 OFDM_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
+ u32 OFDM_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
+ u32 RSSI_Ant1_Sum[ASSOCIATE_ENTRY_NUM];
+ u32 RSSI_Ant2_Sum[ASSOCIATE_ENTRY_NUM];
+ u8 TxAnt[ASSOCIATE_ENTRY_NUM];
+ u8 TargetSTA;
+ u8 antsel;
+ u8 RxIdleAnt;
+};
+
+struct edca_turbo {
+ bool bCurrentTurboEDCA;
+ bool bIsCurRDLState;
+ u32 prv_traffic_idx; /* edca turbo */
+};
+
+struct odm_rate_adapt {
+ u8 Type; /* DM_Type_ByFW/DM_Type_ByDriver */
+ u8 HighRSSIThresh; /* if RSSI > HighRSSIThresh => RATRState is DM_RATR_STA_HIGH */
+ u8 LowRSSIThresh; /* if RSSI <= LowRSSIThresh => RATRState is DM_RATR_STA_LOW */
+ u8 RATRState; /* Current RSSI level, DM_RATR_STA_HIGH/DM_RATR_STA_MIDDLE/DM_RATR_STA_LOW */
+ u32 LastRATR; /* RATR Register Content */
+};
+
+#define IQK_MAC_REG_NUM 4
+#define IQK_ADDA_REG_NUM 16
+#define IQK_BB_REG_NUM_MAX 10
+#define IQK_BB_REG_NUM 9
+#define HP_THERMAL_NUM 8
+
+#define AVG_THERMAL_NUM 8
+#define IQK_Matrix_REG_NUM 8
+#define IQK_Matrix_Settings_NUM 1+24+21
+
+#define DM_Type_ByFWi 0
+#define DM_Type_ByDriver 1
+
+/* Declare for common info */
+
+struct odm_phy_status_info {
+ u8 RxPWDBAll;
+ u8 SignalQuality; /* in 0-100 index. */
+ u8 RxMIMOSignalQuality[MAX_PATH_NUM_92CS]; /* EVM */
+ u8 RxMIMOSignalStrength[MAX_PATH_NUM_92CS];/* in 0~100 index */
+ s8 RxPower; /* in dBm Translate from PWdB */
+ s8 RecvSignalPower;/* Real power in dBm for this packet, no
+ * beautification and aggregation. Keep this raw
+ * info to be used for the other procedures. */
+ u8 BTRxRSSIPercentage;
+ u8 SignalStrength; /* in 0-100 index. */
+ u8 RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */
+ u8 RxSNR[MAX_PATH_NUM_92CS];/* per-path's SNR */
+};
+
+struct odm_phy_dbg_info {
+ /* ODM Write,debug info */
+ s8 RxSNRdB[MAX_PATH_NUM_92CS];
+ u64 NumQryPhyStatus;
+ u64 NumQryPhyStatusCCK;
+ u64 NumQryPhyStatusOFDM;
+ /* Others */
+ s32 RxEVM[MAX_PATH_NUM_92CS];
+};
+
+struct odm_per_pkt_info {
+ s8 Rate;
+ u8 StationID;
+ bool bPacketMatchBSSID;
+ bool bPacketToSelf;
+ bool bPacketBeacon;
+};
+
+struct odm_mac_status_info {
+ u8 test;
+};
+
+enum odm_ability {
+ /* BB Team */
+ ODM_DIG = 0x00000001,
+ ODM_HIGH_POWER = 0x00000002,
+ ODM_CCK_CCA_TH = 0x00000004,
+ ODM_FA_STATISTICS = 0x00000008,
+ ODM_RAMASK = 0x00000010,
+ ODM_RSSI_MONITOR = 0x00000020,
+ ODM_SW_ANTDIV = 0x00000040,
+ ODM_HW_ANTDIV = 0x00000080,
+ ODM_BB_PWRSV = 0x00000100,
+ ODM_2TPATHDIV = 0x00000200,
+ ODM_1TPATHDIV = 0x00000400,
+ ODM_PSD2AFH = 0x00000800
+};
+
+/* 2011/20/20 MH For MP driver RT_WLAN_STA = struct sta_info */
+/* Please declare below ODM relative info in your STA info structure. */
+
+struct odm_sta_info {
+ /* Driver Write */
+ bool bUsed; /* record the sta status link or not? */
+ u8 IOTPeer; /* Enum value. HT_IOT_PEER_E */
+
+ /* ODM Write */
+ /* 1 PHY_STATUS_INFO */
+ u8 RSSI_Path[4]; /* */
+ u8 RSSI_Ave;
+ u8 RXEVM[4];
+ u8 RXSNR[4];
+};
+
+/* 2011/10/20 MH Define Common info enum for all team. */
+
+enum odm_common_info_def {
+ /* Fixed value: */
+
+ /* HOOK BEFORE REG INIT----------- */
+ ODM_CMNINFO_PLATFORM = 0,
+ ODM_CMNINFO_ABILITY, /* ODM_ABILITY_E */
+ ODM_CMNINFO_INTERFACE, /* ODM_INTERFACE_E */
+ ODM_CMNINFO_MP_TEST_CHIP,
+ ODM_CMNINFO_IC_TYPE, /* ODM_IC_TYPE_E */
+ ODM_CMNINFO_CUT_VER, /* ODM_CUT_VERSION_E */
+ ODM_CMNINFO_FAB_VER, /* ODM_FAB_E */
+ ODM_CMNINFO_RF_TYPE, /* RF_PATH_E or ODM_RF_TYPE_E? */
+ ODM_CMNINFO_BOARD_TYPE, /* ODM_BOARD_TYPE_E */
+ ODM_CMNINFO_EXT_LNA, /* true */
+ ODM_CMNINFO_EXT_PA,
+ ODM_CMNINFO_EXT_TRSW,
+ ODM_CMNINFO_PATCH_ID, /* CUSTOMER ID */
+ ODM_CMNINFO_BINHCT_TEST,
+ ODM_CMNINFO_BWIFI_TEST,
+ ODM_CMNINFO_SMART_CONCURRENT,
+ /* HOOK BEFORE REG INIT----------- */
+
+ /* Dynamic value: */
+/* POINTER REFERENCE----------- */
+ ODM_CMNINFO_MAC_PHY_MODE, /* ODM_MAC_PHY_MODE_E */
+ ODM_CMNINFO_TX_UNI,
+ ODM_CMNINFO_RX_UNI,
+ ODM_CMNINFO_WM_MODE, /* ODM_WIRELESS_MODE_E */
+ ODM_CMNINFO_BAND, /* ODM_BAND_TYPE_E */
+ ODM_CMNINFO_SEC_CHNL_OFFSET, /* ODM_SEC_CHNL_OFFSET_E */
+ ODM_CMNINFO_SEC_MODE, /* ODM_SECURITY_E */
+ ODM_CMNINFO_BW, /* ODM_BW_E */
+ ODM_CMNINFO_CHNL,
+
+ ODM_CMNINFO_DMSP_GET_VALUE,
+ ODM_CMNINFO_BUDDY_ADAPTOR,
+ ODM_CMNINFO_DMSP_IS_MASTER,
+ ODM_CMNINFO_SCAN,
+ ODM_CMNINFO_POWER_SAVING,
+ ODM_CMNINFO_ONE_PATH_CCA, /* ODM_CCA_PATH_E */
+ ODM_CMNINFO_DRV_STOP,
+ ODM_CMNINFO_PNP_IN,
+ ODM_CMNINFO_INIT_ON,
+ ODM_CMNINFO_ANT_TEST,
+ ODM_CMNINFO_NET_CLOSED,
+ ODM_CMNINFO_MP_MODE,
+/* POINTER REFERENCE----------- */
+
+/* CALL BY VALUE------------- */
+ ODM_CMNINFO_WIFI_DIRECT,
+ ODM_CMNINFO_WIFI_DISPLAY,
+ ODM_CMNINFO_LINK,
+ ODM_CMNINFO_RSSI_MIN,
+ ODM_CMNINFO_DBG_COMP, /* u64 */
+ ODM_CMNINFO_DBG_LEVEL, /* u32 */
+ ODM_CMNINFO_RA_THRESHOLD_HIGH, /* u8 */
+ ODM_CMNINFO_RA_THRESHOLD_LOW, /* u8 */
+ ODM_CMNINFO_RF_ANTENNA_TYPE, /* u8 */
+ ODM_CMNINFO_BT_DISABLED,
+ ODM_CMNINFO_BT_OPERATION,
+ ODM_CMNINFO_BT_DIG,
+ ODM_CMNINFO_BT_BUSY, /* Check Bt is using or not */
+ ODM_CMNINFO_BT_DISABLE_EDCA,
+/* CALL BY VALUE-------------*/
+
+ /* Dynamic ptr array hook itms. */
+ ODM_CMNINFO_STA_STATUS,
+ ODM_CMNINFO_PHY_STATUS,
+ ODM_CMNINFO_MAC_STATUS,
+ ODM_CMNINFO_MAX,
+};
+
+/* 2011/10/20 MH Define ODM support ability. ODM_CMNINFO_ABILITY */
+
+enum odm_ability_def {
+ /* BB ODM section BIT 0-15 */
+ ODM_BB_DIG = BIT0,
+ ODM_BB_RA_MASK = BIT1,
+ ODM_BB_DYNAMIC_TXPWR = BIT2,
+ ODM_BB_FA_CNT = BIT3,
+ ODM_BB_RSSI_MONITOR = BIT4,
+ ODM_BB_CCK_PD = BIT5,
+ ODM_BB_ANT_DIV = BIT6,
+ ODM_BB_PWR_SAVE = BIT7,
+ ODM_BB_PWR_TRA = BIT8,
+ ODM_BB_RATE_ADAPTIVE = BIT9,
+ ODM_BB_PATH_DIV = BIT10,
+ ODM_BB_PSD = BIT11,
+ ODM_BB_RXHP = BIT12,
+
+ /* MAC DM section BIT 16-23 */
+ ODM_MAC_EDCA_TURBO = BIT16,
+ ODM_MAC_EARLY_MODE = BIT17,
+
+ /* RF ODM section BIT 24-31 */
+ ODM_RF_TX_PWR_TRACK = BIT24,
+ ODM_RF_RX_GAIN_TRACK = BIT25,
+ ODM_RF_CALIBRATION = BIT26,
+};
+
+/* ODM_CMNINFO_INTERFACE */
+enum odm_interface_def {
+ ODM_ITRF_PCIE = 0x1,
+ ODM_ITRF_USB = 0x2,
+ ODM_ITRF_SDIO = 0x4,
+ ODM_ITRF_ALL = 0x7,
+};
+
+/* ODM_CMNINFO_IC_TYPE */
+enum odm_ic_type {
+ ODM_RTL8192S = BIT0,
+ ODM_RTL8192C = BIT1,
+ ODM_RTL8192D = BIT2,
+ ODM_RTL8723A = BIT3,
+ ODM_RTL8188E = BIT4,
+ ODM_RTL8812 = BIT5,
+ ODM_RTL8821 = BIT6,
+};
+
+#define ODM_IC_11N_SERIES \
+ (ODM_RTL8192S | ODM_RTL8192C | ODM_RTL8192D | \
+ ODM_RTL8723A | ODM_RTL8188E)
+#define ODM_IC_11AC_SERIES (ODM_RTL8812)
+
+/* ODM_CMNINFO_CUT_VER */
+enum odm_cut_version {
+ ODM_CUT_A = 1,
+ ODM_CUT_B = 2,
+ ODM_CUT_C = 3,
+ ODM_CUT_D = 4,
+ ODM_CUT_E = 5,
+ ODM_CUT_F = 6,
+ ODM_CUT_TEST = 7,
+};
+
+/* ODM_CMNINFO_FAB_VER */
+enum odm_fab_Version {
+ ODM_TSMC = 0,
+ ODM_UMC = 1,
+};
+
+/* ODM_CMNINFO_RF_TYPE */
+/* For example 1T2R (A+AB = BIT0|BIT4|BIT5) */
+enum odm_rf_path {
+ ODM_RF_TX_A = BIT0,
+ ODM_RF_TX_B = BIT1,
+ ODM_RF_TX_C = BIT2,
+ ODM_RF_TX_D = BIT3,
+ ODM_RF_RX_A = BIT4,
+ ODM_RF_RX_B = BIT5,
+ ODM_RF_RX_C = BIT6,
+ ODM_RF_RX_D = BIT7,
+};
+
+enum odm_rf_type {
+ ODM_1T1R = 0,
+ ODM_1T2R = 1,
+ ODM_2T2R = 2,
+ ODM_2T3R = 3,
+ ODM_2T4R = 4,
+ ODM_3T3R = 5,
+ ODM_3T4R = 6,
+ ODM_4T4R = 7,
+};
+
+/* ODM Dynamic common info value definition */
+
+enum odm_mac_phy_mode {
+ ODM_SMSP = 0,
+ ODM_DMSP = 1,
+ ODM_DMDP = 2,
+};
+
+enum odm_bt_coexist {
+ ODM_BT_BUSY = 1,
+ ODM_BT_ON = 2,
+ ODM_BT_OFF = 3,
+ ODM_BT_NONE = 4,
+};
+
+/* ODM_CMNINFO_OP_MODE */
+enum odm_operation_mode {
+ ODM_NO_LINK = BIT0,
+ ODM_LINK = BIT1,
+ ODM_SCAN = BIT2,
+ ODM_POWERSAVE = BIT3,
+ ODM_AP_MODE = BIT4,
+ ODM_CLIENT_MODE = BIT5,
+ ODM_AD_HOC = BIT6,
+ ODM_WIFI_DIRECT = BIT7,
+ ODM_WIFI_DISPLAY = BIT8,
+};
+
+/* ODM_CMNINFO_WM_MODE */
+enum odm_wireless_mode {
+ ODM_WM_UNKNOW = 0x0,
+ ODM_WM_B = BIT0,
+ ODM_WM_G = BIT1,
+ ODM_WM_A = BIT2,
+ ODM_WM_N24G = BIT3,
+ ODM_WM_N5G = BIT4,
+ ODM_WM_AUTO = BIT5,
+ ODM_WM_AC = BIT6,
+};
+
+/* ODM_CMNINFO_BAND */
+enum odm_band_type {
+ ODM_BAND_2_4G = BIT0,
+ ODM_BAND_5G = BIT1,
+};
+
+/* ODM_CMNINFO_SEC_CHNL_OFFSET */
+enum odm_sec_chnl_offset {
+ ODM_DONT_CARE = 0,
+ ODM_BELOW = 1,
+ ODM_ABOVE = 2
+};
+
+/* ODM_CMNINFO_SEC_MODE */
+enum odm_security {
+ ODM_SEC_OPEN = 0,
+ ODM_SEC_WEP40 = 1,
+ ODM_SEC_TKIP = 2,
+ ODM_SEC_RESERVE = 3,
+ ODM_SEC_AESCCMP = 4,
+ ODM_SEC_WEP104 = 5,
+ ODM_WEP_WPA_MIXED = 6, /* WEP + WPA */
+ ODM_SEC_SMS4 = 7,
+};
+
+/* ODM_CMNINFO_BW */
+enum odm_bw {
+ ODM_BW20M = 0,
+ ODM_BW40M = 1,
+ ODM_BW80M = 2,
+ ODM_BW160M = 3,
+ ODM_BW10M = 4,
+};
+
+/* ODM_CMNINFO_BOARD_TYPE */
+enum odm_board_type {
+ ODM_BOARD_NORMAL = 0,
+ ODM_BOARD_HIGHPWR = 1,
+ ODM_BOARD_MINICARD = 2,
+ ODM_BOARD_SLIM = 3,
+ ODM_BOARD_COMBO = 4,
+};
+
+/* ODM_CMNINFO_ONE_PATH_CCA */
+enum odm_cca_path {
+ ODM_CCA_2R = 0,
+ ODM_CCA_1R_A = 1,
+ ODM_CCA_1R_B = 2,
+};
+
+struct odm_ra_info {
+ u8 RateID;
+ u32 RateMask;
+ u32 RAUseRate;
+ u8 RateSGI;
+ u8 RssiStaRA;
+ u8 PreRssiStaRA;
+ u8 SGIEnable;
+ u8 DecisionRate;
+ u8 PreRate;
+ u8 HighestRate;
+ u8 LowestRate;
+ u32 NscUp;
+ u32 NscDown;
+ u16 RTY[5];
+ u32 TOTAL;
+ u16 DROP;
+ u8 Active;
+ u16 RptTime;
+ u8 RAWaitingCounter;
+ u8 RAPendingCounter;
+ u8 PTActive; /* on or off */
+ u8 PTTryState; /* 0 trying state, 1 for decision state */
+ u8 PTStage; /* 0~6 */
+ u8 PTStopCount; /* Stop PT counter */
+ u8 PTPreRate; /* if rate change do PT */
+ u8 PTPreRssi; /* if RSSI change 5% do PT */
+ u8 PTModeSS; /* decide whitch rate should do PT */
+ u8 RAstage; /* StageRA, decide how many times RA will be done
+ * between PT */
+ u8 PTSmoothFactor;
+};
+
+struct ijk_matrix_regs_set {
+ bool bIQKDone;
+ s32 Value[1][IQK_Matrix_REG_NUM];
+};
+
+struct odm_rf_cal {
+ /* for tx power tracking */
+ u32 RegA24; /* for TempCCK */
+ s32 RegE94;
+ s32 RegE9C;
+ s32 RegEB4;
+ s32 RegEBC;
+
+ u8 TXPowercount;
+ bool bTXPowerTrackingInit;
+ bool bTXPowerTracking;
+ u8 TxPowerTrackControl; /* for mp mode, turn off txpwrtracking
+ * as default */
+ u8 TM_Trigger;
+ u8 InternalPA5G[2]; /* pathA / pathB */
+
+ u8 ThermalMeter[2]; /* ThermalMeter, index 0 for RFIC0,
+ * and 1 for RFIC1 */
+ u8 ThermalValue;
+ u8 ThermalValue_LCK;
+ u8 ThermalValue_IQK;
+ u8 ThermalValue_DPK;
+ u8 ThermalValue_AVG[AVG_THERMAL_NUM];
+ u8 ThermalValue_AVG_index;
+ u8 ThermalValue_RxGain;
+ u8 ThermalValue_Crystal;
+ u8 ThermalValue_DPKstore;
+ u8 ThermalValue_DPKtrack;
+ bool TxPowerTrackingInProgress;
+ bool bDPKenable;
+
+ bool bReloadtxpowerindex;
+ u8 bRfPiEnable;
+ u32 TXPowerTrackingCallbackCnt; /* cosa add for debug */
+
+ u8 bCCKinCH14;
+ u8 CCK_index;
+ u8 OFDM_index[2];
+ bool bDoneTxpower;
+
+ u8 ThermalValue_HP[HP_THERMAL_NUM];
+ u8 ThermalValue_HP_index;
+ struct ijk_matrix_regs_set IQKMatrixRegSetting[IQK_Matrix_Settings_NUM];
+
+ u8 Delta_IQK;
+ u8 Delta_LCK;
+
+ /* for IQK */
+ u32 RegC04;
+ u32 Reg874;
+ u32 RegC08;
+ u32 RegB68;
+ u32 RegB6C;
+ u32 Reg870;
+ u32 Reg860;
+ u32 Reg864;
+
+ bool bIQKInitialized;
+ bool bLCKInProgress;
+ bool bAntennaDetected;
+ u32 ADDA_backup[IQK_ADDA_REG_NUM];
+ u32 IQK_MAC_backup[IQK_MAC_REG_NUM];
+ u32 IQK_BB_backup_recover[9];
+ u32 IQK_BB_backup[IQK_BB_REG_NUM];
+
+ /* for APK */
+ u32 APKoutput[2][2]; /* path A/B; output1_1a/output1_2a */
+ u8 bAPKdone;
+ u8 bAPKThermalMeterIgnore;
+ u8 bDPdone;
+ u8 bDPPathAOK;
+ u8 bDPPathBOK;
+};
+
+/* ODM Dynamic common info value definition */
+
+struct fast_ant_train {
+ u8 Bssid[6];
+ u8 antsel_rx_keep_0;
+ u8 antsel_rx_keep_1;
+ u8 antsel_rx_keep_2;
+ u32 antSumRSSI[7];
+ u32 antRSSIcnt[7];
+ u32 antAveRSSI[7];
+ u8 FAT_State;
+ u32 TrainIdx;
+ u8 antsel_a[ODM_ASSOCIATE_ENTRY_NUM];
+ u8 antsel_b[ODM_ASSOCIATE_ENTRY_NUM];
+ u8 antsel_c[ODM_ASSOCIATE_ENTRY_NUM];
+ u32 MainAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
+ u32 AuxAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
+ u32 MainAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
+ u32 AuxAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
+ u8 RxIdleAnt;
+ bool bBecomeLinked;
+};
+
+enum fat_state {
+ FAT_NORMAL_STATE = 0,
+ FAT_TRAINING_STATE = 1,
+};
+
+enum ant_div_type {
+ NO_ANTDIV = 0xFF,
+ CG_TRX_HW_ANTDIV = 0x01,
+ CGCS_RX_HW_ANTDIV = 0x02,
+ FIXED_HW_ANTDIV = 0x03,
+ CG_TRX_SMART_ANTDIV = 0x04,
+ CGCS_RX_SW_ANTDIV = 0x05,
+};
+
+/* Copy from SD4 defined structure. We use to support PHY DM integration. */
+struct odm_dm_struct {
+ /* Add for different team use temporarily */
+ struct adapter *Adapter; /* For CE/NIC team */
+ struct rtl8192cd_priv *priv; /* For AP/ADSL team */
+ /* WHen you use above pointers, they must be initialized. */
+ bool odm_ready;
+
+ struct rtl8192cd_priv *fake_priv;
+ u64 DebugComponents;
+ u32 DebugLevel;
+
+/* ODM HANDLE, DRIVER NEEDS NOT TO HOOK------ */
+ bool bCckHighPower;
+ u8 RFPathRxEnable; /* ODM_CMNINFO_RFPATH_ENABLE */
+ u8 ControlChannel;
+/* ODM HANDLE, DRIVER NEEDS NOT TO HOOK------ */
+
+/* 1 COMMON INFORMATION */
+ /* Init Value */
+/* HOOK BEFORE REG INIT----------- */
+ /* ODM Platform info AP/ADSL/CE/MP = 1/2/3/4 */
+ u8 SupportPlatform;
+ /* ODM Support Ability DIG/RATR/TX_PWR_TRACK/ ¡K¡K = 1/2/3/¡K */
+ u32 SupportAbility;
+ /* ODM PCIE/USB/SDIO/GSPI = 0/1/2/3 */
+ u8 SupportInterface;
+ /* ODM composite or independent. Bit oriented/ 92C+92D+ .... or any
+ * other type = 1/2/3/... */
+ u32 SupportICType;
+ /* Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/... */
+ u8 CutVersion;
+ /* Fab Version TSMC/UMC = 0/1 */
+ u8 FabVersion;
+ /* RF Type 4T4R/3T3R/2T2R/1T2R/1T1R/... */
+ u8 RFType;
+ /* Board Type Normal/HighPower/MiniCard/SLIM/Combo/. = 0/1/2/3/4/. */
+ u8 BoardType;
+ /* with external LNA NO/Yes = 0/1 */
+ u8 ExtLNA;
+ /* with external PA NO/Yes = 0/1 */
+ u8 ExtPA;
+ /* with external TRSW NO/Yes = 0/1 */
+ u8 ExtTRSW;
+ u8 PatchID; /* Customer ID */
+ bool bInHctTest;
+ bool bWIFITest;
+
+ bool bDualMacSmartConcurrent;
+ u32 BK_SupportAbility;
+ u8 AntDivType;
+/* HOOK BEFORE REG INIT----------- */
+
+ /* Dynamic Value */
+/* POINTER REFERENCE----------- */
+
+ u8 u8_temp;
+ bool bool_temp;
+ struct adapter *adapter_temp;
+
+ /* MAC PHY Mode SMSP/DMSP/DMDP = 0/1/2 */
+ u8 *pMacPhyMode;
+ /* TX Unicast byte count */
+ u64 *pNumTxBytesUnicast;
+ /* RX Unicast byte count */
+ u64 *pNumRxBytesUnicast;
+ /* Wireless mode B/G/A/N = BIT0/BIT1/BIT2/BIT3 */
+ u8 *pWirelessMode; /* ODM_WIRELESS_MODE_E */
+ /* Frequence band 2.4G/5G = 0/1 */
+ u8 *pBandType;
+ /* Secondary channel offset don't_care/below/above = 0/1/2 */
+ u8 *pSecChOffset;
+ /* Security mode Open/WEP/AES/TKIP = 0/1/2/3 */
+ u8 *pSecurity;
+ /* BW info 20M/40M/80M = 0/1/2 */
+ u8 *pBandWidth;
+ /* Central channel location Ch1/Ch2/.... */
+ u8 *pChannel; /* central channel number */
+ /* Common info for 92D DMSP */
+
+ bool *pbGetValueFromOtherMac;
+ struct adapter **pBuddyAdapter;
+ bool *pbMasterOfDMSP; /* MAC0: master, MAC1: slave */
+ /* Common info for Status */
+ bool *pbScanInProcess;
+ bool *pbPowerSaving;
+ /* CCA Path 2-path/path-A/path-B = 0/1/2; using ODM_CCA_PATH_E. */
+ u8 *pOnePathCCA;
+ /* pMgntInfo->AntennaTest */
+ u8 *pAntennaTest;
+ bool *pbNet_closed;
+/* POINTER REFERENCE----------- */
+ /* */
+/* CALL BY VALUE------------- */
+ bool bWIFI_Direct;
+ bool bWIFI_Display;
+ bool bLinked;
+ u8 RSSI_Min;
+ u8 InterfaceIndex; /* Add for 92D dual MAC: 0--Mac0 1--Mac1 */
+ bool bIsMPChip;
+ bool bOneEntryOnly;
+ /* Common info for BTDM */
+ bool bBtDisabled; /* BT is disabled */
+ bool bBtHsOperation; /* BT HS mode is under progress */
+ u8 btHsDigVal; /* use BT rssi to decide the DIG value */
+ bool bBtDisableEdcaTurbo;/* Under some condition, don't enable the
+ * EDCA Turbo */
+ bool bBtBusy; /* BT is busy. */
+/* CALL BY VALUE------------- */
+
+ /* 2 Define STA info. */
+ /* _ODM_STA_INFO */
+ /* For MP, we need to reduce one array pointer for default port.?? */
+ struct sta_info *pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM];
+
+ u16 CurrminRptTime;
+ struct odm_ra_info RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; /* Use MacID as
+ * array index. STA MacID=0,
+ * VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} */
+ /* */
+ /* 2012/02/14 MH Add to share 88E ra with other SW team. */
+ /* We need to colelct all support abilit to a proper area. */
+ /* */
+ bool RaSupport88E;
+
+ /* Define ........... */
+
+ /* Latest packet phy info (ODM write) */
+ struct odm_phy_dbg_info PhyDbgInfo;
+
+ /* Latest packet phy info (ODM write) */
+ struct odm_mac_status_info *pMacInfo;
+
+ /* Different Team independt structure?? */
+
+ /* ODM Structure */
+ struct fast_ant_train DM_FatTable;
+ struct rtw_dig DM_DigTable;
+ struct rtl_ps DM_PSTable;
+ struct dyn_primary_cca DM_PriCCA;
+ struct rx_hpc DM_RXHP_Table;
+ struct false_alarm_stats FalseAlmCnt;
+ struct false_alarm_stats FlaseAlmCntBuddyAdapter;
+ struct sw_ant_switch DM_SWAT_Table;
+ bool RSSI_test;
+
+ struct edca_turbo DM_EDCA_Table;
+ u32 WMMEDCA_BE;
+ /* Copy from SD4 structure */
+ /* */
+ /* ================================================== */
+ /* */
+
+ bool *pbDriverStopped;
+ bool *pbDriverIsGoingToPnpSetPowerSleep;
+ bool *pinit_adpt_in_progress;
+
+ /* PSD */
+ bool bUserAssignLevel;
+ struct timer_list PSDTimer;
+ u8 RSSI_BT; /* come from BT */
+ bool bPSDinProcess;
+ bool bDMInitialGainEnable;
+
+ /* for rate adaptive, in fact, 88c/92c fw will handle this */
+ u8 bUseRAMask;
+
+ struct odm_rate_adapt RateAdaptive;
+
+ struct odm_rf_cal RFCalibrateInfo;
+
+ /* TX power tracking */
+ u8 BbSwingIdxOfdm;
+ u8 BbSwingIdxOfdmCurrent;
+ u8 BbSwingIdxOfdmBase;
+ bool BbSwingFlagOfdm;
+ u8 BbSwingIdxCck;
+ u8 BbSwingIdxCckCurrent;
+ u8 BbSwingIdxCckBase;
+ bool BbSwingFlagCck;
+ u8 *mp_mode;
+ /* ODM system resource. */
+
+ /* ODM relative time. */
+ struct timer_list PathDivSwitchTimer;
+ /* 2011.09.27 add for Path Diversity */
+ struct timer_list CCKPathDiversityTimer;
+ struct timer_list FastAntTrainingTimer;
+}; /* DM_Dynamic_Mechanism_Structure */
+
+enum ODM_RF_CONTENT {
+ odm_radioa_txt = 0x1000,
+ odm_radiob_txt = 0x1001,
+ odm_radioc_txt = 0x1002,
+ odm_radiod_txt = 0x1003
+};
+
+enum odm_bb_config_type {
+ CONFIG_BB_PHY_REG,
+ CONFIG_BB_AGC_TAB,
+ CONFIG_BB_AGC_TAB_2G,
+ CONFIG_BB_AGC_TAB_5G,
+ CONFIG_BB_PHY_REG_PG,
+};
+
+/* Status code */
+enum rt_status {
+ RT_STATUS_SUCCESS,
+ RT_STATUS_FAILURE,
+ RT_STATUS_PENDING,
+ RT_STATUS_RESOURCE,
+ RT_STATUS_INVALID_CONTEXT,
+ RT_STATUS_INVALID_PARAMETER,
+ RT_STATUS_NOT_SUPPORT,
+ RT_STATUS_OS_API_FAILED,
+};
+
+/* 3=========================================================== */
+/* 3 DIG */
+/* 3=========================================================== */
+
+enum dm_dig_op {
+ RT_TYPE_THRESH_HIGH = 0,
+ RT_TYPE_THRESH_LOW = 1,
+ RT_TYPE_BACKOFF = 2,
+ RT_TYPE_RX_GAIN_MIN = 3,
+ RT_TYPE_RX_GAIN_MAX = 4,
+ RT_TYPE_ENABLE = 5,
+ RT_TYPE_DISABLE = 6,
+ DIG_OP_TYPE_MAX
+};
+
+#define DM_DIG_THRESH_HIGH 40
+#define DM_DIG_THRESH_LOW 35
+
+#define DM_SCAN_RSSI_TH 0x14 /* scan return issue for LC */
+
+#define DM_false_ALARM_THRESH_LOW 400
+#define DM_false_ALARM_THRESH_HIGH 1000
+
+#define DM_DIG_MAX_NIC 0x4e
+#define DM_DIG_MIN_NIC 0x1e /* 0x22/0x1c */
+
+#define DM_DIG_MAX_AP 0x32
+#define DM_DIG_MIN_AP 0x20
+
+#define DM_DIG_MAX_NIC_HP 0x46
+#define DM_DIG_MIN_NIC_HP 0x2e
+
+#define DM_DIG_MAX_AP_HP 0x42
+#define DM_DIG_MIN_AP_HP 0x30
+
+/* vivi 92c&92d has different definition, 20110504 */
+/* this is for 92c */
+#define DM_DIG_FA_TH0 0x200/* 0x20 */
+#define DM_DIG_FA_TH1 0x300/* 0x100 */
+#define DM_DIG_FA_TH2 0x400/* 0x200 */
+/* this is for 92d */
+#define DM_DIG_FA_TH0_92D 0x100
+#define DM_DIG_FA_TH1_92D 0x400
+#define DM_DIG_FA_TH2_92D 0x600
+
+#define DM_DIG_BACKOFF_MAX 12
+#define DM_DIG_BACKOFF_MIN -4
+#define DM_DIG_BACKOFF_DEFAULT 10
+
+/* 3=========================================================== */
+/* 3 AGC RX High Power Mode */
+/* 3=========================================================== */
+#define LNA_Low_Gain_1 0x64
+#define LNA_Low_Gain_2 0x5A
+#define LNA_Low_Gain_3 0x58
+
+#define FA_RXHP_TH1 5000
+#define FA_RXHP_TH2 1500
+#define FA_RXHP_TH3 800
+#define FA_RXHP_TH4 600
+#define FA_RXHP_TH5 500
+
+/* 3=========================================================== */
+/* 3 EDCA */
+/* 3=========================================================== */
+
+/* 3=========================================================== */
+/* 3 Dynamic Tx Power */
+/* 3=========================================================== */
+/* Dynamic Tx Power Control Threshold */
+#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74
+#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67
+#define TX_POWER_NEAR_FIELD_THRESH_AP 0x3F
+
+#define TxHighPwrLevel_Normal 0
+#define TxHighPwrLevel_Level1 1
+#define TxHighPwrLevel_Level2 2
+#define TxHighPwrLevel_BT1 3
+#define TxHighPwrLevel_BT2 4
+#define TxHighPwrLevel_15 5
+#define TxHighPwrLevel_35 6
+#define TxHighPwrLevel_50 7
+#define TxHighPwrLevel_70 8
+#define TxHighPwrLevel_100 9
+
+/* 3=========================================================== */
+/* 3 Rate Adaptive */
+/* 3=========================================================== */
+#define DM_RATR_STA_INIT 0
+#define DM_RATR_STA_HIGH 1
+#define DM_RATR_STA_MIDDLE 2
+#define DM_RATR_STA_LOW 3
+
+/* 3=========================================================== */
+/* 3 BB Power Save */
+/* 3=========================================================== */
+
+enum dm_1r_cca {
+ CCA_1R = 0,
+ CCA_2R = 1,
+ CCA_MAX = 2,
+};
+
+enum dm_rf {
+ RF_Save = 0,
+ RF_Normal = 1,
+ RF_MAX = 2,
+};
+
+/* 3=========================================================== */
+/* 3 Antenna Diversity */
+/* 3=========================================================== */
+enum dm_swas {
+ Antenna_A = 1,
+ Antenna_B = 2,
+ Antenna_MAX = 3,
+};
+
+/* Maximal number of antenna detection mechanism needs to perform. */
+#define MAX_ANTENNA_DETECTION_CNT 10
+
+/* Extern Global Variables. */
+#define OFDM_TABLE_SIZE_92C 37
+#define OFDM_TABLE_SIZE_92D 43
+#define CCK_TABLE_SIZE 33
+
+extern u32 OFDMSwingTable[OFDM_TABLE_SIZE_92D];
+extern u8 CCKSwingTable_Ch1_Ch13[CCK_TABLE_SIZE][8];
+extern u8 CCKSwingTable_Ch14 [CCK_TABLE_SIZE][8];
+
+/* check Sta pointer valid or not */
+#define IS_STA_VALID(pSta) (pSta)
+/* 20100514 Joseph: Add definition for antenna switching test after link. */
+/* This indicates two different the steps. */
+/* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the
+ * signal on the air. */
+/* In SWAW_STEP_DETERMINE, driver just compares the signal captured in
+ * SWAW_STEP_PEAK */
+/* with original RSSI to determine if it is necessary to switch antenna. */
+#define SWAW_STEP_PEAK 0
+#define SWAW_STEP_DETERMINE 1
+
+void ODM_Write_DIG(struct odm_dm_struct *pDM_Odm, u8 CurrentIGI);
+void ODM_Write_CCK_CCA_Thres(struct odm_dm_struct *pDM_Odm, u8 CurCCK_CCAThres);
+
+void ODM_SetAntenna(struct odm_dm_struct *pDM_Odm, u8 Antenna);
+
+#define dm_RF_Saving ODM_RF_Saving
+void ODM_RF_Saving(struct odm_dm_struct *pDM_Odm, u8 bForceInNormal);
+
+#define SwAntDivRestAfterLink ODM_SwAntDivRestAfterLink
+void ODM_SwAntDivRestAfterLink(struct odm_dm_struct *pDM_Odm);
+
+#define dm_CheckTXPowerTracking ODM_TXPowerTrackingCheck
+void ODM_TXPowerTrackingCheck(struct odm_dm_struct *pDM_Odm);
+
+bool ODM_RAStateCheck(struct odm_dm_struct *pDM_Odm, s32 RSSI,
+ bool bForceUpdate, u8 *pRATRState);
+
+#define dm_SWAW_RSSI_Check ODM_SwAntDivChkPerPktRssi
+void ODM_SwAntDivChkPerPktRssi(struct odm_dm_struct *pDM_Odm, u8 StationID,
+ struct odm_phy_status_info *pPhyInfo);
+
+u32 ConvertTo_dB(u32 Value);
+
+u32 GetPSDData(struct odm_dm_struct *pDM_Odm, unsigned int point,
+ u8 initial_gain_psd);
+
+void odm_DIGbyRSSI_LPS(struct odm_dm_struct *pDM_Odm);
+
+u32 ODM_Get_Rate_Bitmap(struct odm_dm_struct *pDM_Odm, u32 macid,
+ u32 ra_mask, u8 rssi_level);
+
+void ODM_DMInit(struct odm_dm_struct *pDM_Odm);
+
+void ODM_DMWatchdog(struct odm_dm_struct *pDM_Odm);
+
+void ODM_CmnInfoInit(struct odm_dm_struct *pDM_Odm,
+ enum odm_common_info_def CmnInfo, u32 Value);
+
+void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm,
+ enum odm_common_info_def CmnInfo, void *pValue);
+
+void ODM_CmnInfoPtrArrayHook(struct odm_dm_struct *pDM_Odm,
+ enum odm_common_info_def CmnInfo,
+ u16 Index, void *pValue);
+
+void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value);
+
+void ODM_InitAllTimers(struct odm_dm_struct *pDM_Odm);
+
+void ODM_CancelAllTimers(struct odm_dm_struct *pDM_Odm);
+
+void ODM_ReleaseAllTimers(struct odm_dm_struct *pDM_Odm);
+
+void ODM_ResetIQKResult(struct odm_dm_struct *pDM_Odm);
+
+void ODM_AntselStatistics_88C(struct odm_dm_struct *pDM_Odm, u8 MacId,
+ u32 PWDBAll, bool isCCKrate);
+
+void ODM_SingleDualAntennaDefaultSetting(struct odm_dm_struct *pDM_Odm);
+
+bool ODM_SingleDualAntennaDetection(struct odm_dm_struct *pDM_Odm, u8 mode);
+
+void odm_dtc(struct odm_dm_struct *pDM_Odm);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_HWConfig.h b/drivers/staging/r8188eu/include/odm_HWConfig.h
new file mode 100644
index 000000000000..80f549f196e2
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_HWConfig.h
@@ -0,0 +1,133 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HALHWOUTSRC_H__
+#define __HALHWOUTSRC_H__
+
+/* Definition */
+/* CCK Rates, TxHT = 0 */
+#define DESC92C_RATE1M 0x00
+#define DESC92C_RATE2M 0x01
+#define DESC92C_RATE5_5M 0x02
+#define DESC92C_RATE11M 0x03
+
+/* OFDM Rates, TxHT = 0 */
+#define DESC92C_RATE6M 0x04
+#define DESC92C_RATE9M 0x05
+#define DESC92C_RATE12M 0x06
+#define DESC92C_RATE18M 0x07
+#define DESC92C_RATE24M 0x08
+#define DESC92C_RATE36M 0x09
+#define DESC92C_RATE48M 0x0a
+#define DESC92C_RATE54M 0x0b
+
+/* MCS Rates, TxHT = 1 */
+#define DESC92C_RATEMCS0 0x0c
+#define DESC92C_RATEMCS1 0x0d
+#define DESC92C_RATEMCS2 0x0e
+#define DESC92C_RATEMCS3 0x0f
+#define DESC92C_RATEMCS4 0x10
+#define DESC92C_RATEMCS5 0x11
+#define DESC92C_RATEMCS6 0x12
+#define DESC92C_RATEMCS7 0x13
+#define DESC92C_RATEMCS8 0x14
+#define DESC92C_RATEMCS9 0x15
+#define DESC92C_RATEMCS10 0x16
+#define DESC92C_RATEMCS11 0x17
+#define DESC92C_RATEMCS12 0x18
+#define DESC92C_RATEMCS13 0x19
+#define DESC92C_RATEMCS14 0x1a
+#define DESC92C_RATEMCS15 0x1b
+#define DESC92C_RATEMCS15_SG 0x1c
+#define DESC92C_RATEMCS32 0x20
+
+/* structure and define */
+
+struct phy_rx_agc_info {
+ #ifdef __LITTLE_ENDIAN
+ u8 gain:7, trsw:1;
+ #else
+ u8 trsw:1, gain:7;
+ #endif
+};
+
+struct phy_status_rpt {
+ struct phy_rx_agc_info path_agc[3];
+ u8 ch_corr[2];
+ u8 cck_sig_qual_ofdm_pwdb_all;
+ u8 cck_agc_rpt_ofdm_cfosho_a;
+ u8 cck_rpt_b_ofdm_cfosho_b;
+ u8 rsvd_1;/* ch_corr_msb; */
+ u8 noise_power_db_msb;
+ u8 path_cfotail[2];
+ u8 pcts_mask[2];
+ s8 stream_rxevm[2];
+ u8 path_rxsnr[3];
+ u8 noise_power_db_lsb;
+ u8 rsvd_2[3];
+ u8 stream_csi[2];
+ u8 stream_target_csi[2];
+ s8 sig_evm;
+ u8 rsvd_3;
+
+#ifdef __LITTLE_ENDIAN
+ u8 antsel_rx_keep_2:1; /* ex_intf_flg:1; */
+ u8 sgi_en:1;
+ u8 rxsc:2;
+ u8 idle_long:1;
+ u8 r_ant_train_en:1;
+ u8 ant_sel_b:1;
+ u8 ant_sel:1;
+#else /* _BIG_ENDIAN_ */
+ u8 ant_sel:1;
+ u8 ant_sel_b:1;
+ u8 r_ant_train_en:1;
+ u8 idle_long:1;
+ u8 rxsc:2;
+ u8 sgi_en:1;
+ u8 antsel_rx_keep_2:1; /* ex_intf_flg:1; */
+#endif
+};
+
+void odm_Init_RSSIForDM(struct odm_dm_struct *pDM_Odm);
+
+void ODM_PhyStatusQuery(struct odm_dm_struct *pDM_Odm,
+ struct odm_phy_status_info *pPhyInfo,
+ u8 *pPhyStatus,
+ struct odm_per_pkt_info *pPktinfo,
+ struct adapter *adapt);
+
+void ODM_MacStatusQuery(struct odm_dm_struct *pDM_Odm,
+ u8 *pMacStatus,
+ u8 MacID,
+ bool bPacketMatchBSSID,
+ bool bPacketToSelf,
+ bool bPacketBeacon);
+
+enum HAL_STATUS ODM_ConfigRFWithHeaderFile(struct odm_dm_struct *pDM_Odm,
+ enum rf_radio_path Content,
+ enum rf_radio_path eRFPath);
+
+enum HAL_STATUS ODM_ConfigBBWithHeaderFile(struct odm_dm_struct *pDM_Odm,
+ enum odm_bb_config_type ConfigType);
+
+enum HAL_STATUS ODM_ConfigMACWithHeaderFile(struct odm_dm_struct *pDM_Odm);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_RTL8188E.h b/drivers/staging/r8188eu/include/odm_RTL8188E.h
new file mode 100644
index 000000000000..f96ad5af4bd5
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_RTL8188E.h
@@ -0,0 +1,56 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __ODM_RTL8188E_H__
+#define __ODM_RTL8188E_H__
+
+#define MAIN_ANT 0
+#define AUX_ANT 1
+#define MAIN_ANT_CG_TRX 1
+#define AUX_ANT_CG_TRX 0
+#define MAIN_ANT_CGCS_RX 0
+#define AUX_ANT_CGCS_RX 1
+
+void ODM_DIG_LowerBound_88E(struct odm_dm_struct *pDM_Odm);
+
+void ODM_AntennaDiversityInit_88E(struct odm_dm_struct *pDM_Odm);
+
+void ODM_AntennaDiversity_88E(struct odm_dm_struct *pDM_Odm);
+
+void ODM_SetTxAntByTxInfo_88E(struct odm_dm_struct *pDM_Odm, u8 *pDesc,
+ u8 macId);
+
+void ODM_UpdateRxIdleAnt_88E(struct odm_dm_struct *pDM_Odm, u8 Ant);
+
+void ODM_AntselStatistics_88E(struct odm_dm_struct *pDM_Odm, u8 antsel_tr_mux,
+ u32 MacId, u8 RxPWDBAll);
+
+void odm_FastAntTraining(struct odm_dm_struct *pDM_Odm);
+
+void odm_FastAntTrainingCallback(struct odm_dm_struct *pDM_Odm);
+
+void odm_FastAntTrainingWorkItemCallback(struct odm_dm_struct *pDM_Odm);
+
+void odm_PrimaryCCA_Init(struct odm_dm_struct *pDM_Odm);
+
+bool ODM_DynamicPrimaryCCA_DupRTS(struct odm_dm_struct *pDM_Odm);
+
+void odm_DynamicPrimaryCCA(struct odm_dm_struct *pDM_Odm);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_RegConfig8188E.h b/drivers/staging/r8188eu/include/odm_RegConfig8188E.h
new file mode 100644
index 000000000000..f2bf7a0d9867
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_RegConfig8188E.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_ODM_REGCONFIG_H_8188E
+#define __INC_ODM_REGCONFIG_H_8188E
+
+void odm_ConfigRFReg_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr, u32 Data,
+ enum rf_radio_path RF_PATH, u32 RegAddr);
+
+void odm_ConfigRF_RadioA_8188E(struct odm_dm_struct *pDM_Odm,
+ u32 Addr, u32 Data);
+
+void odm_ConfigRF_RadioB_8188E(struct odm_dm_struct *pDM_Odm,
+ u32 Addr, u32 Data);
+
+void odm_ConfigMAC_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr, u8 Data);
+
+void odm_ConfigBB_AGC_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr,
+ u32 Bitmask, u32 Data);
+
+void odm_ConfigBB_PHY_REG_PG_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr,
+ u32 Bitmask, u32 Data);
+
+void odm_ConfigBB_PHY_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr,
+ u32 Bitmask, u32 Data);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_RegDefine11AC.h b/drivers/staging/r8188eu/include/odm_RegDefine11AC.h
new file mode 100644
index 000000000000..01425f36634c
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_RegDefine11AC.h
@@ -0,0 +1,46 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_REGDEFINE11AC_H__
+#define __ODM_REGDEFINE11AC_H__
+
+/* 2 RF REG LIST */
+
+/* 2 BB REG LIST */
+/* PAGE 8 */
+/* PAGE 9 */
+#define ODM_REG_OFDM_FA_RST_11AC 0x9A4
+/* PAGE A */
+#define ODM_REG_CCK_CCA_11AC 0xA0A
+#define ODM_REG_CCK_FA_RST_11AC 0xA2C
+#define ODM_REG_CCK_FA_11AC 0xA5C
+/* PAGE C */
+#define ODM_REG_IGI_A_11AC 0xC50
+/* PAGE E */
+#define ODM_REG_IGI_B_11AC 0xE50
+/* PAGE F */
+#define ODM_REG_OFDM_FA_11AC 0xF48
+
+/* 2 MAC REG LIST */
+
+/* DIG Related */
+#define ODM_BIT_IGI_11AC 0xFFFFFFFF
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_RegDefine11N.h b/drivers/staging/r8188eu/include/odm_RegDefine11N.h
new file mode 100644
index 000000000000..2b888dee3dd5
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_RegDefine11N.h
@@ -0,0 +1,160 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_REGDEFINE11N_H__
+#define __ODM_REGDEFINE11N_H__
+
+/* 2 RF REG LIST */
+#define ODM_REG_RF_MODE_11N 0x00
+#define ODM_REG_RF_0B_11N 0x0B
+#define ODM_REG_CHNBW_11N 0x18
+#define ODM_REG_T_METER_11N 0x24
+#define ODM_REG_RF_25_11N 0x25
+#define ODM_REG_RF_26_11N 0x26
+#define ODM_REG_RF_27_11N 0x27
+#define ODM_REG_RF_2B_11N 0x2B
+#define ODM_REG_RF_2C_11N 0x2C
+#define ODM_REG_RXRF_A3_11N 0x3C
+#define ODM_REG_T_METER_92D_11N 0x42
+#define ODM_REG_T_METER_88E_11N 0x42
+
+/* 2 BB REG LIST */
+/* PAGE 8 */
+#define ODM_REG_BB_CTRL_11N 0x800
+#define ODM_REG_RF_PIN_11N 0x804
+#define ODM_REG_PSD_CTRL_11N 0x808
+#define ODM_REG_TX_ANT_CTRL_11N 0x80C
+#define ODM_REG_BB_PWR_SAV5_11N 0x818
+#define ODM_REG_CCK_RPT_FORMAT_11N 0x824
+#define ODM_REG_RX_DEFUALT_A_11N 0x858
+#define ODM_REG_RX_DEFUALT_B_11N 0x85A
+#define ODM_REG_BB_PWR_SAV3_11N 0x85C
+#define ODM_REG_ANTSEL_CTRL_11N 0x860
+#define ODM_REG_RX_ANT_CTRL_11N 0x864
+#define ODM_REG_PIN_CTRL_11N 0x870
+#define ODM_REG_BB_PWR_SAV1_11N 0x874
+#define ODM_REG_ANTSEL_PATH_11N 0x878
+#define ODM_REG_BB_3WIRE_11N 0x88C
+#define ODM_REG_SC_CNT_11N 0x8C4
+#define ODM_REG_PSD_DATA_11N 0x8B4
+/* PAGE 9 */
+#define ODM_REG_ANT_MAPPING1_11N 0x914
+#define ODM_REG_ANT_MAPPING2_11N 0x918
+/* PAGE A */
+#define ODM_REG_CCK_ANTDIV_PARA1_11N 0xA00
+#define ODM_REG_CCK_CCA_11N 0xA0A
+#define ODM_REG_CCK_ANTDIV_PARA2_11N 0xA0C
+#define ODM_REG_CCK_ANTDIV_PARA3_11N 0xA10
+#define ODM_REG_CCK_ANTDIV_PARA4_11N 0xA14
+#define ODM_REG_CCK_FILTER_PARA1_11N 0xA22
+#define ODM_REG_CCK_FILTER_PARA2_11N 0xA23
+#define ODM_REG_CCK_FILTER_PARA3_11N 0xA24
+#define ODM_REG_CCK_FILTER_PARA4_11N 0xA25
+#define ODM_REG_CCK_FILTER_PARA5_11N 0xA26
+#define ODM_REG_CCK_FILTER_PARA6_11N 0xA27
+#define ODM_REG_CCK_FILTER_PARA7_11N 0xA28
+#define ODM_REG_CCK_FILTER_PARA8_11N 0xA29
+#define ODM_REG_CCK_FA_RST_11N 0xA2C
+#define ODM_REG_CCK_FA_MSB_11N 0xA58
+#define ODM_REG_CCK_FA_LSB_11N 0xA5C
+#define ODM_REG_CCK_CCA_CNT_11N 0xA60
+#define ODM_REG_BB_PWR_SAV4_11N 0xA74
+/* PAGE B */
+#define ODM_REG_LNA_SWITCH_11N 0xB2C
+#define ODM_REG_PATH_SWITCH_11N 0xB30
+#define ODM_REG_RSSI_CTRL_11N 0xB38
+#define ODM_REG_CONFIG_ANTA_11N 0xB68
+#define ODM_REG_RSSI_BT_11N 0xB9C
+/* PAGE C */
+#define ODM_REG_OFDM_FA_HOLDC_11N 0xC00
+#define ODM_REG_RX_PATH_11N 0xC04
+#define ODM_REG_TRMUX_11N 0xC08
+#define ODM_REG_OFDM_FA_RSTC_11N 0xC0C
+#define ODM_REG_RXIQI_MATRIX_11N 0xC14
+#define ODM_REG_TXIQK_MATRIX_LSB1_11N 0xC4C
+#define ODM_REG_IGI_A_11N 0xC50
+#define ODM_REG_ANTDIV_PARA2_11N 0xC54
+#define ODM_REG_IGI_B_11N 0xC58
+#define ODM_REG_ANTDIV_PARA3_11N 0xC5C
+#define ODM_REG_BB_PWR_SAV2_11N 0xC70
+#define ODM_REG_RX_OFF_11N 0xC7C
+#define ODM_REG_TXIQK_MATRIXA_11N 0xC80
+#define ODM_REG_TXIQK_MATRIXB_11N 0xC88
+#define ODM_REG_TXIQK_MATRIXA_LSB2_11N 0xC94
+#define ODM_REG_TXIQK_MATRIXB_LSB2_11N 0xC9C
+#define ODM_REG_RXIQK_MATRIX_LSB_11N 0xCA0
+#define ODM_REG_ANTDIV_PARA1_11N 0xCA4
+#define ODM_REG_OFDM_FA_TYPE1_11N 0xCF0
+/* PAGE D */
+#define ODM_REG_OFDM_FA_RSTD_11N 0xD00
+#define ODM_REG_OFDM_FA_TYPE2_11N 0xDA0
+#define ODM_REG_OFDM_FA_TYPE3_11N 0xDA4
+#define ODM_REG_OFDM_FA_TYPE4_11N 0xDA8
+/* PAGE E */
+#define ODM_REG_TXAGC_A_6_18_11N 0xE00
+#define ODM_REG_TXAGC_A_24_54_11N 0xE04
+#define ODM_REG_TXAGC_A_1_MCS32_11N 0xE08
+#define ODM_REG_TXAGC_A_MCS0_3_11N 0xE10
+#define ODM_REG_TXAGC_A_MCS4_7_11N 0xE14
+#define ODM_REG_TXAGC_A_MCS8_11_11N 0xE18
+#define ODM_REG_TXAGC_A_MCS12_15_11N 0xE1C
+#define ODM_REG_FPGA0_IQK_11N 0xE28
+#define ODM_REG_TXIQK_TONE_A_11N 0xE30
+#define ODM_REG_RXIQK_TONE_A_11N 0xE34
+#define ODM_REG_TXIQK_PI_A_11N 0xE38
+#define ODM_REG_RXIQK_PI_A_11N 0xE3C
+#define ODM_REG_TXIQK_11N 0xE40
+#define ODM_REG_RXIQK_11N 0xE44
+#define ODM_REG_IQK_AGC_PTS_11N 0xE48
+#define ODM_REG_IQK_AGC_RSP_11N 0xE4C
+#define ODM_REG_BLUETOOTH_11N 0xE6C
+#define ODM_REG_RX_WAIT_CCA_11N 0xE70
+#define ODM_REG_TX_CCK_RFON_11N 0xE74
+#define ODM_REG_TX_CCK_BBON_11N 0xE78
+#define ODM_REG_OFDM_RFON_11N 0xE7C
+#define ODM_REG_OFDM_BBON_11N 0xE80
+#define ODM_REG_TX2RX_11N 0xE84
+#define ODM_REG_TX2TX_11N 0xE88
+#define ODM_REG_RX_CCK_11N 0xE8C
+#define ODM_REG_RX_OFDM_11N 0xED0
+#define ODM_REG_RX_WAIT_RIFS_11N 0xED4
+#define ODM_REG_RX2RX_11N 0xED8
+#define ODM_REG_STANDBY_11N 0xEDC
+#define ODM_REG_SLEEP_11N 0xEE0
+#define ODM_REG_PMPD_ANAEN_11N 0xEEC
+
+/* 2 MAC REG LIST */
+#define ODM_REG_BB_RST_11N 0x02
+#define ODM_REG_ANTSEL_PIN_11N 0x4C
+#define ODM_REG_EARLY_MODE_11N 0x4D0
+#define ODM_REG_RSSI_MONITOR_11N 0x4FE
+#define ODM_REG_EDCA_VO_11N 0x500
+#define ODM_REG_EDCA_VI_11N 0x504
+#define ODM_REG_EDCA_BE_11N 0x508
+#define ODM_REG_EDCA_BK_11N 0x50C
+#define ODM_REG_TXPAUSE_11N 0x522
+#define ODM_REG_RESP_TX_11N 0x6D8
+#define ODM_REG_ANT_TRAIN_PARA1_11N 0x7b0
+#define ODM_REG_ANT_TRAIN_PARA2_11N 0x7b4
+
+/* DIG Related */
+#define ODM_BIT_IGI_11N 0x0000007F
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_debug.h b/drivers/staging/r8188eu/include/odm_debug.h
new file mode 100644
index 000000000000..5e58b603d6ac
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_debug.h
@@ -0,0 +1,143 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_DBG_H__
+#define __ODM_DBG_H__
+
+/* */
+/* Define the debug levels */
+/* */
+/* 1. DBG_TRACE and DBG_LOUD are used for normal cases. */
+/* They can help SW engineer to develop or trace states changed */
+/* and also help HW enginner to trace every operation to and from HW, */
+/* e.g IO, Tx, Rx. */
+/* */
+/* 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases, */
+/* which help us to debug SW or HW. */
+
+/* Never used in a call to ODM_RT_TRACE()! */
+#define ODM_DBG_OFF 1
+
+/* Fatal bug. */
+/* For example, Tx/Rx/IO locked up, OS hangs, memory access violation, */
+/* resource allocation failed, unexpected HW behavior, HW BUG and so on. */
+#define ODM_DBG_SERIOUS 2
+
+/* Abnormal, rare, or unexpeted cases. */
+/* For example, IRP/Packet/OID canceled, device suprisely unremoved and so on. */
+#define ODM_DBG_WARNING 3
+
+/* Normal case with useful information about current SW or HW state. */
+/* For example, Tx/Rx descriptor to fill, Tx/Rx descr. completed status, */
+/* SW protocol state change, dynamic mechanism state change and so on. */
+/* */
+#define ODM_DBG_LOUD 4
+
+/* Normal case with detail execution flow or information. */
+#define ODM_DBG_TRACE 5
+
+/* Define the tracing components */
+/* BB Functions */
+#define ODM_COMP_DIG BIT0
+#define ODM_COMP_RA_MASK BIT1
+#define ODM_COMP_DYNAMIC_TXPWR BIT2
+#define ODM_COMP_FA_CNT BIT3
+#define ODM_COMP_RSSI_MONITOR BIT4
+#define ODM_COMP_CCK_PD BIT5
+#define ODM_COMP_ANT_DIV BIT6
+#define ODM_COMP_PWR_SAVE BIT7
+#define ODM_COMP_PWR_TRA BIT8
+#define ODM_COMP_RATE_ADAPTIVE BIT9
+#define ODM_COMP_PATH_DIV BIT10
+#define ODM_COMP_PSD BIT11
+#define ODM_COMP_DYNAMIC_PRICCA BIT12
+#define ODM_COMP_RXHP BIT13
+/* MAC Functions */
+#define ODM_COMP_EDCA_TURBO BIT16
+#define ODM_COMP_EARLY_MODE BIT17
+/* RF Functions */
+#define ODM_COMP_TX_PWR_TRACK BIT24
+#define ODM_COMP_RX_GAIN_TRACK BIT25
+#define ODM_COMP_CALIBRATION BIT26
+/* Common Functions */
+#define ODM_COMP_COMMON BIT30
+#define ODM_COMP_INIT BIT31
+
+/*------------------------Export Marco Definition---------------------------*/
+#define DbgPrint pr_info
+#define RT_PRINTK(fmt, args...) \
+ DbgPrint( "%s(): " fmt, __func__, ## args);
+
+#ifndef ASSERT
+ #define ASSERT(expr)
+#endif
+
+#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt) \
+ if (((comp) & pDM_Odm->DebugComponents) && \
+ (level <= pDM_Odm->DebugLevel)) { \
+ if (pDM_Odm->SupportICType == ODM_RTL8192C) \
+ DbgPrint("[ODM-92C] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8192D) \
+ DbgPrint("[ODM-92D] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8723A) \
+ DbgPrint("[ODM-8723A] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8188E) \
+ DbgPrint("[ODM-8188E] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8812) \
+ DbgPrint("[ODM-8812] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8821) \
+ DbgPrint("[ODM-8821] "); \
+ RT_PRINTK fmt; \
+ }
+
+#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt) \
+ if (((comp) & pDM_Odm->DebugComponents) && \
+ (level <= pDM_Odm->DebugLevel)) { \
+ RT_PRINTK fmt; \
+ }
+
+#define ODM_RT_ASSERT(pDM_Odm, expr, fmt) \
+ if (!(expr)) { \
+ DbgPrint( "Assertion failed! %s at ......\n", #expr); \
+ DbgPrint( " ......%s,%s,line=%d\n", __FILE__, \
+ __func__, __LINE__); \
+ RT_PRINTK fmt; \
+ ASSERT(false); \
+ }
+#define ODM_dbg_enter() { DbgPrint("==> %s\n", __func__); }
+#define ODM_dbg_exit() { DbgPrint("<== %s\n", __func__); }
+#define ODM_dbg_trace(str) { DbgPrint("%s:%s\n", __func__, str); }
+
+#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr) \
+ if (((comp) & pDM_Odm->DebugComponents) && \
+ (level <= pDM_Odm->DebugLevel)) { \
+ int __i; \
+ u8 *__ptr = (u8 *)ptr; \
+ DbgPrint("[ODM] "); \
+ DbgPrint(title_str); \
+ DbgPrint(" "); \
+ for (__i = 0; __i < 6; __i++) \
+ DbgPrint("%02X%s", __ptr[__i], (__i==5)?"":"-");\
+ DbgPrint("\n"); \
+ }
+
+void ODM_InitDebugSetting(struct odm_dm_struct *pDM_Odm);
+
+#endif /* __ODM_DBG_H__ */
diff --git a/drivers/staging/r8188eu/include/odm_interface.h b/drivers/staging/r8188eu/include/odm_interface.h
new file mode 100644
index 000000000000..0abfa6febb7e
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_interface.h
@@ -0,0 +1,164 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_INTERFACE_H__
+#define __ODM_INTERFACE_H__
+
+/* */
+/* =========== Constant/Structure/Enum/... Define */
+/* */
+
+/* */
+/* =========== Macro Define */
+/* */
+
+#define _reg_all(_name) ODM_##_name
+#define _reg_ic(_name, _ic) ODM_##_name##_ic
+#define _bit_all(_name) BIT_##_name
+#define _bit_ic(_name, _ic) BIT_##_name##_ic
+
+/* _cat: implemented by Token-Pasting Operator. */
+
+/*===================================
+
+#define ODM_REG_DIG_11N 0xC50
+#define ODM_REG_DIG_11AC 0xDDD
+
+ODM_REG(DIG,_pDM_Odm)
+=====================================*/
+
+#define _reg_11N(_name) ODM_REG_##_name##_11N
+#define _reg_11AC(_name) ODM_REG_##_name##_11AC
+#define _bit_11N(_name) ODM_BIT_##_name##_11N
+#define _bit_11AC(_name) ODM_BIT_##_name##_11AC
+
+#define _cat(_name, _ic_type, _func) \
+ ( \
+ ((_ic_type) & ODM_IC_11N_SERIES) ? _func##_11N(_name) : \
+ _func##_11AC(_name) \
+ )
+
+/* _name: name of register or bit. */
+/* Example: "ODM_REG(R_A_AGC_CORE1, pDM_Odm)" */
+/* gets "ODM_R_A_AGC_CORE1" or "ODM_R_A_AGC_CORE1_8192C",
+ * depends on SupportICType. */
+#define ODM_REG(_name, _pDM_Odm) _cat(_name, _pDM_Odm->SupportICType, _reg)
+#define ODM_BIT(_name, _pDM_Odm) _cat(_name, _pDM_Odm->SupportICType, _bit)
+
+enum odm_h2c_cmd {
+ ODM_H2C_RSSI_REPORT = 0,
+ ODM_H2C_PSD_RESULT= 1,
+ ODM_H2C_PathDiv = 2,
+ ODM_MAX_H2CCMD
+};
+
+/* 2012/02/17 MH For non-MP compile pass only. Linux does not support workitem. */
+/* Suggest HW team to use thread instead of workitem. Windows also support the feature. */
+typedef void (*RT_WORKITEM_CALL_BACK)(void *pContext);
+
+/* =========== Extern Variable ??? It should be forbidden. */
+
+/* =========== EXtern Function Prototype */
+
+u8 ODM_Read1Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr);
+
+u16 ODM_Read2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr);
+
+u32 ODM_Read4Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr);
+
+void ODM_Write1Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u8 Data);
+
+void ODM_Write2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u16 Data);
+
+void ODM_Write4Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 Data);
+
+void ODM_SetMACReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr,
+ u32 BitMask, u32 Data);
+
+u32 ODM_GetMACReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 BitMask);
+
+void ODM_SetBBReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr,
+ u32 BitMask, u32 Data);
+
+u32 ODM_GetBBReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 BitMask);
+
+void ODM_SetRFReg(struct odm_dm_struct *pDM_Odm, enum rf_radio_path eRFPath,
+ u32 RegAddr, u32 BitMask, u32 Data);
+
+u32 ODM_GetRFReg(struct odm_dm_struct *pDM_Odm, enum rf_radio_path eRFPath,
+ u32 RegAddr, u32 BitMask);
+
+/* Memory Relative Function. */
+void ODM_AllocateMemory(struct odm_dm_struct *pDM_Odm, void **pPtr, u32 length);
+void ODM_FreeMemory(struct odm_dm_struct *pDM_Odm, void *pPtr, u32 length);
+
+s32 ODM_CompareMemory(struct odm_dm_struct *pDM_Odm, void *pBuf1, void *pBuf2,
+ u32 length);
+
+/* ODM MISC-spin lock relative API. */
+void ODM_AcquireSpinLock(struct odm_dm_struct *pDM_Odm,
+ enum RT_SPINLOCK_TYPE type);
+
+void ODM_ReleaseSpinLock(struct odm_dm_struct *pDM_Odm,
+ enum RT_SPINLOCK_TYPE type);
+
+/* ODM MISC-workitem relative API. */
+void ODM_InitializeWorkItem(struct odm_dm_struct *pDM_Odm, void *pRtWorkItem,
+ RT_WORKITEM_CALL_BACK RtWorkItemCallback,
+ void *pContext, const char *szID);
+
+void ODM_StartWorkItem(void *pRtWorkItem);
+
+void ODM_StopWorkItem(void *pRtWorkItem);
+
+void ODM_FreeWorkItem(void *pRtWorkItem);
+
+void ODM_ScheduleWorkItem(void *pRtWorkItem);
+
+void ODM_IsWorkItemScheduled(void *pRtWorkItem);
+
+/* ODM Timer relative API. */
+void ODM_StallExecution(u32 usDelay);
+
+void ODM_delay_ms(u32 ms);
+
+void ODM_delay_us(u32 us);
+
+void ODM_sleep_ms(u32 ms);
+
+void ODM_sleep_us(u32 us);
+
+void ODM_SetTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer,
+ u32 msDelay);
+
+void ODM_InitializeTimer(struct odm_dm_struct *pDM_Odm,
+ struct timer_list *pTimer, void *CallBackFunc,
+ void *pContext, const char *szID);
+
+void ODM_CancelTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer);
+
+void ODM_ReleaseTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer);
+
+/* ODM FW relative API. */
+u32 ODM_FillH2CCmd(u8 *pH2CBuffer, u32 H2CBufferLen, u32 CmdNum,
+ u32 *pElementID, u32 *pCmdLen, u8 **pCmbBuffer,
+ u8 *CmdStartSeq);
+
+#endif /* __ODM_INTERFACE_H__ */
diff --git a/drivers/staging/r8188eu/include/odm_precomp.h b/drivers/staging/r8188eu/include/odm_precomp.h
new file mode 100644
index 000000000000..b2fbb5d5ea77
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_precomp.h
@@ -0,0 +1,103 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_PRECOMP_H__
+#define __ODM_PRECOMP_H__
+
+#include "odm_types.h"
+
+#define TEST_FALG___ 1
+
+/* 2 Config Flags and Structs - defined by each ODM Type */
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <hal_intf.h>
+
+/* 2 OutSrc Header Files */
+
+#include "odm.h"
+#include "odm_HWConfig.h"
+#include "odm_debug.h"
+#include "odm_RegDefine11AC.h"
+#include "odm_RegDefine11N.h"
+
+#include "HalPhyRf.h"
+#include "HalPhyRf_8188e.h"/* for IQK,LCK,Power-tracking */
+#include "Hal8188ERateAdaptive.h"/* for RA,Power training */
+#include "rtl8188e_hal.h"
+
+#include "odm_interface.h"
+#include "odm_reg.h"
+
+#include "HalHWImg8188E_MAC.h"
+#include "HalHWImg8188E_RF.h"
+#include "HalHWImg8188E_BB.h"
+#include "Hal8188EReg.h"
+
+#include "odm_RegConfig8188E.h"
+#include "odm_RTL8188E.h"
+
+void odm_CmnInfoHook_Debug(struct odm_dm_struct *pDM_Odm);
+void odm_CmnInfoInit_Debug(struct odm_dm_struct *pDM_Odm);
+void odm_DIGInit(struct odm_dm_struct *pDM_Odm);
+void odm_RateAdaptiveMaskInit(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicBBPowerSavingInit(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicTxPowerInit(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingInit(struct odm_dm_struct *pDM_Odm);
+void ODM_EdcaTurboInit(struct odm_dm_struct *pDM_Odm);
+void odm_SwAntDivInit_NIC(struct odm_dm_struct *pDM_Odm);
+void odm_GlobalAdapterCheck(void);
+void odm_CmnInfoUpdate_Debug(struct odm_dm_struct *pDM_Odm);
+void odm_CommonInfoSelfUpdate(struct odm_dm_struct *pDM_Odm);
+void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm);
+void odm_DIG(struct odm_dm_struct *pDM_Odm);
+void odm_CCKPacketDetectionThresh(struct odm_dm_struct *pDM_Odm);
+void odm_RefreshRateAdaptiveMaskMP(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicBBPowerSaving(struct odm_dm_struct *pDM_Odm);
+void odm_SwAntDivChkAntSwitch(struct odm_dm_struct *pDM_Odm, u8 Step);
+void odm_EdcaTurboCheck(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicTxPower(struct odm_dm_struct *pDM_Odm);
+void odm_CommonInfoSelfInit(struct odm_dm_struct *pDM_Odm);
+void odm_SwAntDivInit(struct odm_dm_struct *pDM_Odm);
+void odm_RSSIMonitorCheck(struct odm_dm_struct *pDM_Odm);
+void odm_RefreshRateAdaptiveMask(struct odm_dm_struct *pDM_Odm);
+void odm_1R_CCA(struct odm_dm_struct *pDM_Odm);
+void odm_RefreshRateAdaptiveMaskCE(struct odm_dm_struct *pDM_Odm);
+void odm_RefreshRateAdaptiveMaskAPADSL(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicTxPowerNIC(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicTxPowerAP(struct odm_dm_struct *pDM_Odm);
+void odm_RSSIMonitorCheckMP(struct odm_dm_struct *pDM_Odm);
+void odm_RSSIMonitorCheckCE(struct odm_dm_struct *pDM_Odm);
+void odm_RSSIMonitorCheckAP(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingThermalMeterInit(struct odm_dm_struct *pDM_Odm);
+void odm_EdcaTurboCheckCE(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingCheckCE(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingCheckMP(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingCheckAP(struct odm_dm_struct *pDM_Odm);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
+void odm_SwAntDivChkAntSwitchCallback(void *FunctionContext);
+#else
+void odm_SwAntDivChkAntSwitchCallback(struct timer_list *t);
+#endif
+void odm_InitHybridAntDiv(struct odm_dm_struct *pDM_Odm);
+void odm_HwAntDiv(struct odm_dm_struct *pDM_Odm);
+
+#endif /* __ODM_PRECOMP_H__ */
diff --git a/drivers/staging/r8188eu/include/odm_reg.h b/drivers/staging/r8188eu/include/odm_reg.h
new file mode 100644
index 000000000000..4221855e333c
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_reg.h
@@ -0,0 +1,116 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/* */
+/* File Name: odm_reg.h */
+/* */
+/* Description: */
+/* */
+/* This file is for general register definition. */
+/* */
+/* */
+/* */
+#ifndef __HAL_ODM_REG_H__
+#define __HAL_ODM_REG_H__
+
+/* */
+/* Register Definition */
+/* */
+
+/* MAC REG */
+#define ODM_BB_RESET 0x002
+#define ODM_DUMMY 0x4fe
+#define ODM_EDCA_VO_PARAM 0x500
+#define ODM_EDCA_VI_PARAM 0x504
+#define ODM_EDCA_BE_PARAM 0x508
+#define ODM_EDCA_BK_PARAM 0x50C
+#define ODM_TXPAUSE 0x522
+
+/* BB REG */
+#define ODM_FPGA_PHY0_PAGE8 0x800
+#define ODM_PSD_SETTING 0x808
+#define ODM_AFE_SETTING 0x818
+#define ODM_TXAGC_B_6_18 0x830
+#define ODM_TXAGC_B_24_54 0x834
+#define ODM_TXAGC_B_MCS32_5 0x838
+#define ODM_TXAGC_B_MCS0_MCS3 0x83c
+#define ODM_TXAGC_B_MCS4_MCS7 0x848
+#define ODM_TXAGC_B_MCS8_MCS11 0x84c
+#define ODM_ANALOG_REGISTER 0x85c
+#define ODM_RF_INTERFACE_OUTPUT 0x860
+#define ODM_TXAGC_B_MCS12_MCS15 0x868
+#define ODM_TXAGC_B_11_A_2_11 0x86c
+#define ODM_AD_DA_LSB_MASK 0x874
+#define ODM_ENABLE_3_WIRE 0x88c
+#define ODM_PSD_REPORT 0x8b4
+#define ODM_R_ANT_SELECT 0x90c
+#define ODM_CCK_ANT_SELECT 0xa07
+#define ODM_CCK_PD_THRESH 0xa0a
+#define ODM_CCK_RF_REG1 0xa11
+#define ODM_CCK_MATCH_FILTER 0xa20
+#define ODM_CCK_RAKE_MAC 0xa2e
+#define ODM_CCK_CNT_RESET 0xa2d
+#define ODM_CCK_TX_DIVERSITY 0xa2f
+#define ODM_CCK_FA_CNT_MSB 0xa5b
+#define ODM_CCK_FA_CNT_LSB 0xa5c
+#define ODM_CCK_NEW_FUNCTION 0xa75
+#define ODM_OFDM_PHY0_PAGE_C 0xc00
+#define ODM_OFDM_RX_ANT 0xc04
+#define ODM_R_A_RXIQI 0xc14
+#define ODM_R_A_AGC_CORE1 0xc50
+#define ODM_R_A_AGC_CORE2 0xc54
+#define ODM_R_B_AGC_CORE1 0xc58
+#define ODM_R_AGC_PAR 0xc70
+#define ODM_R_HTSTF_AGC_PAR 0xc7c
+#define ODM_TX_PWR_TRAINING_A 0xc90
+#define ODM_TX_PWR_TRAINING_B 0xc98
+#define ODM_OFDM_FA_CNT1 0xcf0
+#define ODM_OFDM_PHY0_PAGE_D 0xd00
+#define ODM_OFDM_FA_CNT2 0xda0
+#define ODM_OFDM_FA_CNT3 0xda4
+#define ODM_OFDM_FA_CNT4 0xda8
+#define ODM_TXAGC_A_6_18 0xe00
+#define ODM_TXAGC_A_24_54 0xe04
+#define ODM_TXAGC_A_1_MCS32 0xe08
+#define ODM_TXAGC_A_MCS0_MCS3 0xe10
+#define ODM_TXAGC_A_MCS4_MCS7 0xe14
+#define ODM_TXAGC_A_MCS8_MCS11 0xe18
+#define ODM_TXAGC_A_MCS12_MCS15 0xe1c
+
+/* RF REG */
+#define ODM_GAIN_SETTING 0x00
+#define ODM_CHANNEL 0x18
+
+/* Ant Detect Reg */
+#define ODM_DPDT 0x300
+
+/* PSD Init */
+#define ODM_PSDREG 0x808
+
+/* 92D Path Div */
+#define PATHDIV_REG 0xB30
+#define PATHDIV_TRI 0xBA0
+
+/* */
+/* Bitmap Definition */
+/* */
+
+#define BIT_FA_RESET BIT0
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_types.h b/drivers/staging/r8188eu/include/odm_types.h
new file mode 100644
index 000000000000..f62d8b486a28
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_types.h
@@ -0,0 +1,61 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __ODM_TYPES_H__
+#define __ODM_TYPES_H__
+
+/* */
+/* Define Different SW team support */
+/* */
+#define ODM_AP 0x01 /* BIT0 */
+#define ODM_ADSL 0x02 /* BIT1 */
+#define ODM_CE 0x04 /* BIT2 */
+#define ODM_MP 0x08 /* BIT3 */
+
+#define RT_PCI_INTERFACE 1
+#define RT_USB_INTERFACE 2
+#define RT_SDIO_INTERFACE 3
+
+enum HAL_STATUS {
+ HAL_STATUS_SUCCESS,
+ HAL_STATUS_FAILURE,
+};
+
+enum RT_SPINLOCK_TYPE {
+ RT_TEMP = 1,
+};
+
+#include <basic_types.h>
+
+#define DEV_BUS_TYPE RT_USB_INTERFACE
+
+#define SET_TX_DESC_ANTSEL_A_88E(__pTxDesc, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pTxDesc+8, 24, 1, __Value)
+#define SET_TX_DESC_ANTSEL_B_88E(__pTxDesc, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pTxDesc+8, 25, 1, __Value)
+#define SET_TX_DESC_ANTSEL_C_88E(__pTxDesc, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pTxDesc+28, 29, 1, __Value)
+
+/* define useless flag to avoid compile warning */
+#define USE_WORKITEM 0
+#define FOR_BRAZIL_PRETEST 0
+#define BT_30_SUPPORT 0
+#define FPGA_TWO_MAC_VERIFICATION 0
+
+#endif /* __ODM_TYPES_H__ */
diff --git a/drivers/staging/r8188eu/include/osdep_intf.h b/drivers/staging/r8188eu/include/osdep_intf.h
new file mode 100644
index 000000000000..c4599c583b59
--- /dev/null
+++ b/drivers/staging/r8188eu/include/osdep_intf.h
@@ -0,0 +1,83 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __OSDEP_INTF_H_
+#define __OSDEP_INTF_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+struct intf_priv {
+ u8 *intf_dev;
+ u32 max_iosz; /* USB2.0: 128, USB1.1: 64, SDIO:64 */
+ u32 max_xmitsz; /* USB2.0: unlimited, SDIO:512 */
+ u32 max_recvsz; /* USB2.0: unlimited, SDIO:512 */
+
+ u8 *io_rwmem;
+ u8 *allocated_io_rwmem;
+ u32 io_wsz; /* unit: 4bytes */
+ u32 io_rsz;/* unit: 4bytes */
+ u8 intf_status;
+
+ void (*_bus_io)(u8 *priv);
+
+/*
+Under Sync. IRP (SDIO/USB)
+A protection mechanism is necessary for the io_rwmem(read/write protocol)
+
+Under Async. IRP (SDIO/USB)
+The protection mechanism is through the pending queue.
+*/
+ struct mutex ioctl_mutex;
+ /* when in USB, IO is through interrupt in/out endpoints */
+ struct usb_device *udev;
+ struct urb *piorw_urb;
+ u8 io_irp_cnt;
+ u8 bio_irp_pending;
+ struct semaphore io_retevt;
+ struct timer_list io_timer;
+ u8 bio_irp_timeout;
+ u8 bio_timer_cancel;
+};
+
+u8 rtw_init_drv_sw(struct adapter *padapter);
+u8 rtw_free_drv_sw(struct adapter *padapter);
+u8 rtw_reset_drv_sw(struct adapter *padapter);
+
+u32 rtw_start_drv_threads(struct adapter *padapter);
+void rtw_stop_drv_threads (struct adapter *padapter);
+void rtw_cancel_all_timer(struct adapter *padapter);
+
+int rtw_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+
+int rtw_init_netdev_name(struct net_device *pnetdev, const char *ifname);
+struct net_device *rtw_init_netdev(struct adapter *padapter);
+u16 rtw_recv_select_queue(struct sk_buff *skb);
+void rtw_proc_init_one(struct net_device *dev);
+void rtw_proc_remove_one(struct net_device *dev);
+
+void rtw_ips_dev_unload(struct adapter *padapter);
+
+int rtw_ips_pwr_up(struct adapter *padapter);
+void rtw_ips_pwr_down(struct adapter *padapter);
+int rtw_hw_suspend(struct adapter *padapter);
+int rtw_hw_resume(struct adapter *padapter);
+
+#endif /* _OSDEP_INTF_H_ */
diff --git a/drivers/staging/r8188eu/include/osdep_service.h b/drivers/staging/r8188eu/include/osdep_service.h
new file mode 100644
index 000000000000..ce76a2c99bbd
--- /dev/null
+++ b/drivers/staging/r8188eu/include/osdep_service.h
@@ -0,0 +1,489 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __OSDEP_SERVICE_H_
+#define __OSDEP_SERVICE_H_
+
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 11, 0)
+#include <linux/sched/signal.h>
+#endif
+#include <basic_types.h>
+
+#define _FAIL 0
+#define _SUCCESS 1
+#define RTW_RX_HANDLED 2
+
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/circ_buf.h>
+#include <linux/uaccess.h>
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+#include <linux/io.h>
+#include <linux/semaphore.h>
+#include <linux/sem.h>
+#include <linux/sched.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <linux/if_arp.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h> /* Necessary because we use the proc fs */
+#include <linux/interrupt.h> /* for struct tasklet_struct */
+#include <linux/ip.h>
+#include <linux/kthread.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+
+struct __queue {
+ struct list_head queue;
+ spinlock_t lock;
+};
+
+#define thread_exit() complete_and_exit(NULL, 0)
+
+static inline struct list_head *get_list_head(struct __queue *queue)
+{
+ return (&(queue->queue));
+}
+
+static inline int _enter_critical_mutex(struct mutex *pmutex, unsigned long *pirqL)
+{
+ int ret;
+
+ ret = mutex_lock_interruptible(pmutex);
+ return ret;
+}
+
+static inline void _exit_critical_mutex(struct mutex *pmutex, unsigned long *pirqL)
+{
+ mutex_unlock(pmutex);
+}
+
+static inline void rtw_list_delete(struct list_head *plist)
+{
+ list_del_init(plist);
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
+static inline void _init_timer(struct timer_list *ptimer,struct net_device *nic_hdl,void *pfunc,void* cntx)
+{
+ ptimer->function = pfunc;
+ ptimer->data = (unsigned long)cntx;
+ init_timer(ptimer);
+}
+#endif
+
+static inline void _set_timer(struct timer_list *ptimer,u32 delay_time)
+{
+ mod_timer(ptimer , (jiffies+(delay_time*HZ/1000)));
+}
+
+static inline void _cancel_timer(struct timer_list *ptimer,u8 *bcancelled)
+{
+ del_timer_sync(ptimer);
+ *bcancelled= true;/* true ==1; false==0 */
+}
+
+#define RTW_TIMER_HDL_ARGS void *FunctionContext
+#define RTW_TIMER_HDL_NAME(name) rtw_##name##_timer_hdl
+#define RTW_DECLARE_TIMER_HDL(name) void RTW_TIMER_HDL_NAME(name)(RTW_TIMER_HDL_ARGS)
+
+static inline void _init_workitem(struct work_struct *pwork, void *pfunc, void * cntx)
+{
+ INIT_WORK(pwork, pfunc);
+}
+
+static inline void _set_workitem(struct work_struct *pwork)
+{
+ schedule_work(pwork);
+}
+
+static inline void _cancel_workitem_sync(struct work_struct *pwork)
+{
+ cancel_work_sync(pwork);
+}
+/* */
+/* Global Mutex: can only be used at PASSIVE level. */
+/* */
+
+#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter) \
+{ \
+ while (atomic_inc_return((atomic_t *)&(_MutexCounter)) != 1)\
+ { \
+ atomic_dec((atomic_t *)&(_MutexCounter)); \
+ msleep(10); \
+ } \
+}
+
+#define RELEASE_GLOBAL_MUTEX(_MutexCounter) \
+{ \
+ atomic_dec((atomic_t *)&(_MutexCounter)); \
+}
+
+static inline int rtw_netif_queue_stopped(struct net_device *pnetdev)
+{
+ return netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 0)) &&
+ netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 1)) &&
+ netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 2)) &&
+ netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 3));
+}
+
+static inline void rtw_netif_wake_queue(struct net_device *pnetdev)
+{
+ netif_tx_wake_all_queues(pnetdev);
+}
+
+static inline void rtw_netif_start_queue(struct net_device *pnetdev)
+{
+ netif_tx_start_all_queues(pnetdev);
+}
+
+static inline void rtw_netif_stop_queue(struct net_device *pnetdev)
+{
+ netif_tx_stop_all_queues(pnetdev);
+}
+
+#ifndef BIT
+ #define BIT(x) ( 1 << (x))
+#endif
+
+#define BIT0 0x00000001
+#define BIT1 0x00000002
+#define BIT2 0x00000004
+#define BIT3 0x00000008
+#define BIT4 0x00000010
+#define BIT5 0x00000020
+#define BIT6 0x00000040
+#define BIT7 0x00000080
+#define BIT8 0x00000100
+#define BIT9 0x00000200
+#define BIT10 0x00000400
+#define BIT11 0x00000800
+#define BIT12 0x00001000
+#define BIT13 0x00002000
+#define BIT14 0x00004000
+#define BIT15 0x00008000
+#define BIT16 0x00010000
+#define BIT17 0x00020000
+#define BIT18 0x00040000
+#define BIT19 0x00080000
+#define BIT20 0x00100000
+#define BIT21 0x00200000
+#define BIT22 0x00400000
+#define BIT23 0x00800000
+#define BIT24 0x01000000
+#define BIT25 0x02000000
+#define BIT26 0x04000000
+#define BIT27 0x08000000
+#define BIT28 0x10000000
+#define BIT29 0x20000000
+#define BIT30 0x40000000
+#define BIT31 0x80000000
+#define BIT32 0x0100000000
+#define BIT33 0x0200000000
+#define BIT34 0x0400000000
+#define BIT35 0x0800000000
+#define BIT36 0x1000000000
+
+extern int RTW_STATUS_CODE(int error_code);
+
+/* flags used for rtw_update_mem_stat() */
+enum {
+ MEM_STAT_VIR_ALLOC_SUCCESS,
+ MEM_STAT_VIR_ALLOC_FAIL,
+ MEM_STAT_VIR_FREE,
+ MEM_STAT_PHY_ALLOC_SUCCESS,
+ MEM_STAT_PHY_ALLOC_FAIL,
+ MEM_STAT_PHY_FREE,
+ MEM_STAT_TX, /* used to distinguish TX/RX, asigned from caller */
+ MEM_STAT_TX_ALLOC_SUCCESS,
+ MEM_STAT_TX_ALLOC_FAIL,
+ MEM_STAT_TX_FREE,
+ MEM_STAT_RX, /* used to distinguish TX/RX, asigned from caller */
+ MEM_STAT_RX_ALLOC_SUCCESS,
+ MEM_STAT_RX_ALLOC_FAIL,
+ MEM_STAT_RX_FREE
+};
+
+extern unsigned char MCS_rate_2R[16];
+extern unsigned char MCS_rate_1R[16];
+extern unsigned char RTW_WPA_OUI[];
+extern unsigned char WPA_TKIP_CIPHER[4];
+extern unsigned char RSN_TKIP_CIPHER[4];
+
+#define rtw_update_mem_stat(flag, sz) do {} while (0)
+u8 *_rtw_vmalloc(u32 sz);
+u8 *_rtw_zvmalloc(u32 sz);
+void _rtw_vmfree(u8 *pbuf, u32 sz);
+u8 *_rtw_zmalloc(u32 sz);
+u8 *_rtw_malloc(u32 sz);
+void _rtw_mfree(u8 *pbuf, u32 sz);
+#define rtw_vmalloc(sz) _rtw_vmalloc((sz))
+#define rtw_zvmalloc(sz) _rtw_zvmalloc((sz))
+#define rtw_vmfree(pbuf, sz) _rtw_vmfree((pbuf), (sz))
+#define rtw_malloc(sz) _rtw_malloc((sz))
+#define rtw_zmalloc(sz) _rtw_zmalloc((sz))
+#define rtw_mfree(pbuf, sz) _rtw_mfree((pbuf), (sz))
+
+void *rtw_malloc2d(int h, int w, int size);
+void rtw_mfree2d(void *pbuf, int h, int w, int size);
+
+u32 _rtw_down_sema(struct semaphore *sema);
+void _rtw_mutex_init(struct mutex *pmutex);
+void _rtw_mutex_free(struct mutex *pmutex);
+void _rtw_spinlock_free(spinlock_t *plock);
+
+void _rtw_init_queue(struct __queue *pqueue);
+
+u32 rtw_systime_to_ms(u32 systime);
+u32 rtw_ms_to_systime(u32 ms);
+s32 rtw_get_passing_time_ms(u32 start);
+s32 rtw_get_time_interval_ms(u32 start, u32 end);
+
+void rtw_sleep_schedulable(int ms);
+
+void rtw_msleep_os(int ms);
+void rtw_usleep_os(int us);
+
+u32 rtw_atoi(u8 *s);
+
+void rtw_mdelay_os(int ms);
+void rtw_udelay_os(int us);
+
+void rtw_yield_os(void);
+
+static inline unsigned char _cancel_timer_ex(struct timer_list *ptimer)
+{
+ return del_timer_sync(ptimer);
+}
+
+static __inline void thread_enter(char *name)
+{
+#ifdef daemonize
+ daemonize("%s", name);
+#endif
+ allow_signal(SIGTERM);
+}
+
+static inline void flush_signals_thread(void)
+{
+ if (signal_pending (current))
+ flush_signals(current);
+}
+
+static inline int res_to_status(int res)
+{
+ return res;
+}
+
+#define _RND(sz, r) ((((sz)+((r)-1))/(r))*(r))
+#define RND4(x) (((x >> 2) + (((x & 3) == 0) ? 0: 1)) << 2)
+
+static inline u32 _RND4(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 2) + ((sz & 3) ? 1: 0)) << 2;
+ return val;
+}
+
+static inline u32 _RND8(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 3) + ((sz & 7) ? 1: 0)) << 3;
+ return val;
+}
+
+static inline u32 _RND128(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 7) + ((sz & 127) ? 1: 0)) << 7;
+ return val;
+}
+
+static inline u32 _RND256(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 8) + ((sz & 255) ? 1: 0)) << 8;
+ return val;
+}
+
+static inline u32 _RND512(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 9) + ((sz & 511) ? 1: 0)) << 9;
+ return val;
+}
+
+static inline u32 bitshift(u32 bitmask)
+{
+ u32 i;
+
+ for (i = 0; i <= 31; i++)
+ if (((bitmask>>i) & 0x1) == 1) break;
+ return i;
+}
+
+/* limitation of path length */
+#define PATH_LENGTH_MAX PATH_MAX
+
+void rtw_suspend_lock_init(void);
+void rtw_suspend_lock_uninit(void);
+void rtw_lock_suspend(void);
+void rtw_unlock_suspend(void);
+
+/* Atomic integer operations */
+#define ATOMIC_T atomic_t
+
+void ATOMIC_SET(ATOMIC_T *v, int i);
+int ATOMIC_READ(ATOMIC_T *v);
+void ATOMIC_ADD(ATOMIC_T *v, int i);
+void ATOMIC_SUB(ATOMIC_T *v, int i);
+void ATOMIC_INC(ATOMIC_T *v);
+void ATOMIC_DEC(ATOMIC_T *v);
+int ATOMIC_ADD_RETURN(ATOMIC_T *v, int i);
+int ATOMIC_SUB_RETURN(ATOMIC_T *v, int i);
+int ATOMIC_INC_RETURN(ATOMIC_T *v);
+int ATOMIC_DEC_RETURN(ATOMIC_T *v);
+
+struct rtw_netdev_priv_indicator {
+ void *priv;
+ u32 sizeof_priv;
+};
+struct net_device *rtw_alloc_etherdev_with_old_priv(int sizeof_priv,
+ void *old_priv);
+struct net_device *rtw_alloc_etherdev(int sizeof_priv);
+
+#define rtw_netdev_priv(netdev) \
+ (((struct rtw_netdev_priv_indicator *)netdev_priv(netdev))->priv)
+void rtw_free_netdev(struct net_device *netdev);
+
+#define NDEV_FMT "%s"
+#define NDEV_ARG(ndev) ndev->name
+#define ADPT_FMT "%s"
+#define ADPT_ARG(adapter) adapter->pnetdev->name
+#define FUNC_NDEV_FMT "%s(%s)"
+#define FUNC_NDEV_ARG(ndev) __func__, ndev->name
+#define FUNC_ADPT_FMT "%s(%s)"
+#define FUNC_ADPT_ARG(adapter) __func__, adapter->pnetdev->name
+
+#define rtw_signal_process(pid, sig) kill_pid(find_vpid((pid)),(sig), 1)
+
+u64 rtw_modular64(u64 x, u64 y);
+u64 rtw_division64(u64 x, u64 y);
+
+/* Macros for handling unaligned memory accesses */
+
+#define RTW_GET_BE16(a) ((u16) (((a)[0] << 8) | (a)[1]))
+#define RTW_PUT_BE16(a, val) \
+ do { \
+ (a)[0] = ((u16) (val)) >> 8; \
+ (a)[1] = ((u16) (val)) & 0xff; \
+ } while (0)
+
+#define RTW_PUT_LE16(a, val) \
+ do { \
+ (a)[1] = ((u16) (val)) >> 8; \
+ (a)[0] = ((u16) (val)) & 0xff; \
+ } while (0)
+
+#define RTW_GET_BE24(a) ((((u32) (a)[0]) << 16) | (((u32) (a)[1]) << 8) | \
+ ((u32) (a)[2]))
+#define RTW_PUT_BE24(a, val) \
+ do { \
+ (a)[0] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[2] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define RTW_GET_BE32(a) ((((u32) (a)[0]) << 24) | (((u32) (a)[1]) << 16) | \
+ (((u32) (a)[2]) << 8) | ((u32) (a)[3]))
+#define RTW_PUT_BE32(a, val) \
+ do { \
+ (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[3] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define RTW_GET_LE32(a) ((((u32) (a)[3]) << 24) | (((u32) (a)[2]) << 16) | \
+ (((u32) (a)[1]) << 8) | ((u32) (a)[0]))
+#define RTW_PUT_LE32(a, val) \
+ do { \
+ (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[0] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define RTW_GET_BE64(a) ((((u64) (a)[0]) << 56) | (((u64) (a)[1]) << 48) | \
+ (((u64) (a)[2]) << 40) | (((u64) (a)[3]) << 32) | \
+ (((u64) (a)[4]) << 24) | (((u64) (a)[5]) << 16) | \
+ (((u64) (a)[6]) << 8) | ((u64) (a)[7]))
+#define RTW_PUT_BE64(a, val) \
+ do { \
+ (a)[0] = (u8) (((u64) (val)) >> 56); \
+ (a)[1] = (u8) (((u64) (val)) >> 48); \
+ (a)[2] = (u8) (((u64) (val)) >> 40); \
+ (a)[3] = (u8) (((u64) (val)) >> 32); \
+ (a)[4] = (u8) (((u64) (val)) >> 24); \
+ (a)[5] = (u8) (((u64) (val)) >> 16); \
+ (a)[6] = (u8) (((u64) (val)) >> 8); \
+ (a)[7] = (u8) (((u64) (val)) & 0xff); \
+ } while (0)
+
+#define RTW_GET_LE64(a) ((((u64) (a)[7]) << 56) | (((u64) (a)[6]) << 48) | \
+ (((u64) (a)[5]) << 40) | (((u64) (a)[4]) << 32) | \
+ (((u64) (a)[3]) << 24) | (((u64) (a)[2]) << 16) | \
+ (((u64) (a)[1]) << 8) | ((u64) (a)[0]))
+
+void rtw_buf_free(u8 **buf, u32 *buf_len);
+void rtw_buf_update(u8 **buf, u32 *buf_len, u8 *src, u32 src_len);
+
+struct rtw_cbuf {
+ u32 write;
+ u32 read;
+ u32 size;
+ void *bufs[0];
+};
+
+bool rtw_cbuf_full(struct rtw_cbuf *cbuf);
+bool rtw_cbuf_empty(struct rtw_cbuf *cbuf);
+bool rtw_cbuf_push(struct rtw_cbuf *cbuf, void *buf);
+void *rtw_cbuf_pop(struct rtw_cbuf *cbuf);
+struct rtw_cbuf *rtw_cbuf_alloc(u32 size);
+int wifirate2_ratetbl_inx(unsigned char rate);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/recv_osdep.h b/drivers/staging/r8188eu/include/recv_osdep.h
new file mode 100644
index 000000000000..b6ddf0ba2dde
--- /dev/null
+++ b/drivers/staging/r8188eu/include/recv_osdep.h
@@ -0,0 +1,54 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RECV_OSDEP_H_
+#define __RECV_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+int _rtw_init_recv_priv(struct recv_priv *precvpriv, struct adapter *padapter);
+void _rtw_free_recv_priv(struct recv_priv *precvpriv);
+
+s32 rtw_recv_entry(struct recv_frame *precv_frame);
+int rtw_recv_indicatepkt(struct adapter *adapter, struct recv_frame *recv_frame);
+void rtw_recv_returnpacket(struct net_device *cnxt, struct sk_buff *retpkt);
+
+void rtw_hostapd_mlme_rx(struct adapter *padapter, struct recv_frame *recv_fr);
+void rtw_handle_tkip_mic_err(struct adapter *padapter, u8 bgroup);
+
+int rtw_init_recv_priv(struct recv_priv *precvpriv, struct adapter *padapter);
+void rtw_free_recv_priv(struct recv_priv *precvpriv);
+
+int rtw_os_recv_resource_init(struct recv_priv *recvpr, struct adapter *adapt);
+int rtw_os_recv_resource_alloc(struct adapter *adapt, struct recv_frame *recvfr);
+void rtw_os_recv_resource_free(struct recv_priv *precvpriv);
+
+int rtw_os_recvbuf_resource_alloc(struct adapter *adapt, struct recv_buf *buf);
+int rtw_os_recvbuf_resource_free(struct adapter *adapt, struct recv_buf *buf);
+
+void rtw_os_read_port(struct adapter *padapter, struct recv_buf *precvbuf);
+
+void rtw_init_recv_timer(struct recv_reorder_ctrl *preorder_ctrl);
+int nat25_handle_frame(struct adapter *priv, struct sk_buff *skb);
+int _netdev_open(struct net_device *pnetdev);
+int netdev_open(struct net_device *pnetdev);
+int netdev_close(struct net_device *pnetdev);
+
+#endif /* */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_cmd.h b/drivers/staging/r8188eu/include/rtl8188e_cmd.h
new file mode 100644
index 000000000000..b32bc28503d0
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_cmd.h
@@ -0,0 +1,122 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_CMD_H__
+#define __RTL8188E_CMD_H__
+
+enum RTL8188E_H2C_CMD_ID {
+ /* Class Common */
+ H2C_COM_RSVD_PAGE = 0x00,
+ H2C_COM_MEDIA_STATUS_RPT = 0x01,
+ H2C_COM_SCAN = 0x02,
+ H2C_COM_KEEP_ALIVE = 0x03,
+ H2C_COM_DISCNT_DECISION = 0x04,
+ H2C_COM_INIT_OFFLOAD = 0x06,
+ H2C_COM_REMOTE_WAKE_CTL = 0x07,
+ H2C_COM_AP_OFFLOAD = 0x08,
+ H2C_COM_BCN_RSVD_PAGE = 0x09,
+ H2C_COM_PROB_RSP_RSVD_PAGE = 0x0A,
+
+ /* Class PS */
+ H2C_PS_PWR_MODE = 0x20,
+ H2C_PS_TUNE_PARA = 0x21,
+ H2C_PS_TUNE_PARA_2 = 0x22,
+ H2C_PS_LPS_PARA = 0x23,
+ H2C_PS_P2P_OFFLOAD = 0x24,
+
+ /* Class DM */
+ H2C_DM_MACID_CFG = 0x40,
+ H2C_DM_TXBF = 0x41,
+
+ /* Class BT */
+ H2C_BT_COEX_MASK = 0x60,
+ H2C_BT_COEX_GPIO_MODE = 0x61,
+ H2C_BT_DAC_SWING_VAL = 0x62,
+ H2C_BT_PSD_RST = 0x63,
+
+ /* Class */
+ H2C_RESET_TSF = 0xc0,
+};
+
+struct cmd_msg_parm {
+ u8 eid; /* element id */
+ u8 sz; /* sz */
+ u8 buf[6];
+};
+
+enum {
+ PWRS
+};
+
+struct setpwrmode_parm {
+ u8 Mode;/* 0:Active,1:LPS,2:WMMPS */
+ u8 SmartPS_RLBM;/* LPS= 0:PS_Poll,1:PS_Poll,2:NullData,WMM= 0:PS_Poll,1:NullData */
+ u8 AwakeInterval; /* unit: beacon interval */
+ u8 bAllQueueUAPSD;
+ u8 PwrState;/* AllON(0x0c),RFON(0x04),RFOFF(0x00) */
+};
+
+struct H2C_SS_RFOFF_PARAM {
+ u8 ROFOn; /* 1: on, 0:off */
+ u16 gpio_period; /* unit: 1024 us */
+} __packed;
+
+struct joinbssrpt_parm {
+ u8 OpMode; /* RT_MEDIA_STATUS */
+};
+
+struct rsvdpage_loc {
+ u8 LocProbeRsp;
+ u8 LocPsPoll;
+ u8 LocNullData;
+ u8 LocQosNull;
+ u8 LocBTQosNull;
+};
+
+struct P2P_PS_Offload_t {
+ u8 Offload_En:1;
+ u8 role:1; /* 1: Owner, 0: Client */
+ u8 CTWindow_En:1;
+ u8 NoA0_En:1;
+ u8 NoA1_En:1;
+ u8 AllStaSleep:1; /* Only valid in Owner */
+ u8 discovery:1;
+ u8 rsvd:1;
+};
+
+struct P2P_PS_CTWPeriod_t {
+ u8 CTWPeriod; /* TU */
+};
+
+/* host message to firmware cmd */
+void rtl8188e_set_FwPwrMode_cmd(struct adapter *padapter, u8 Mode);
+void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *padapter, u8 mstatus);
+u8 rtl8188e_set_rssi_cmd(struct adapter *padapter, u8 *param);
+u8 rtl8188e_set_raid_cmd(struct adapter *padapter, u32 mask);
+void rtl8188e_Add_RateATid(struct adapter *padapter, u32 bitmap, u8 arg,
+ u8 rssi_level);
+
+#ifdef CONFIG_88EU_P2P
+void rtl8188e_set_p2p_ps_offload_cmd(struct adapter *adapt, u8 p2p_ps_state);
+#endif /* CONFIG_88EU_P2P */
+
+void CheckFwRsvdPageContent(struct adapter *adapt);
+void rtl8188e_set_FwMediaStatus_cmd(struct adapter *adapt, __le16 mstatus_rpt);
+
+#endif/* __RTL8188E_CMD_H__ */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_dm.h b/drivers/staging/r8188eu/include/rtl8188e_dm.h
new file mode 100644
index 000000000000..97a3175250ef
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_dm.h
@@ -0,0 +1,62 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_DM_H__
+#define __RTL8188E_DM_H__
+enum{
+ UP_LINK,
+ DOWN_LINK,
+};
+/* duplicate code,will move to ODM ######### */
+#define IQK_MAC_REG_NUM 4
+#define IQK_ADDA_REG_NUM 16
+#define IQK_BB_REG_NUM 9
+#define HP_THERMAL_NUM 8
+/* duplicate code,will move to ODM ######### */
+struct dm_priv {
+ u8 DM_Type;
+ u8 DMFlag;
+ u8 InitDMFlag;
+ u32 InitODMFlag;
+
+ /* Upper and Lower Signal threshold for Rate Adaptive*/
+ int UndecoratedSmoothedPWDB;
+ int UndecoratedSmoothedCCK;
+ int EntryMinUndecoratedSmoothedPWDB;
+ int EntryMaxUndecoratedSmoothedPWDB;
+ int MinUndecoratedPWDBForDM;
+ int LastMinUndecoratedPWDBForDM;
+
+ /* for High Power */
+ u8 bDynamicTxPowerEnable;
+ u8 LastDTPLvl;
+ u8 DynamicTxHighPowerLvl;/* Tx Power Control for Near/Far Range */
+ u8 PowerIndex_backup[6];
+};
+
+void rtl8188e_init_dm_priv(struct adapter *adapt);
+void rtl8188e_deinit_dm_priv(struct adapter *adapt);
+void rtl8188e_InitHalDm(struct adapter *adapt);
+void rtl8188e_HalDmWatchDog(struct adapter *adapt);
+
+void AntDivCompare8188E(struct adapter *adapt, struct wlan_bssid_ex *dst,
+ struct wlan_bssid_ex *src);
+u8 AntDivBeforeLink8188E(struct adapter *adapt);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
new file mode 100644
index 000000000000..09368a5cd6e8
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -0,0 +1,471 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_HAL_H__
+#define __RTL8188E_HAL_H__
+
+/* include HAL Related header after HAL Related compiling flags */
+#include "rtl8188e_spec.h"
+#include "Hal8188EPhyReg.h"
+#include "Hal8188EPhyCfg.h"
+#include "rtl8188e_rf.h"
+#include "rtl8188e_dm.h"
+#include "rtl8188e_recv.h"
+#include "rtl8188e_xmit.h"
+#include "rtl8188e_cmd.h"
+#include "Hal8188EPwrSeq.h"
+#include "rtl8188e_sreset.h"
+#include "rtw_efuse.h"
+
+#include "odm_precomp.h"
+
+/* Fw Array */
+#define Rtl8188E_FwImageArray Rtl8188EFwImgArray
+#define Rtl8188E_FWImgArrayLength Rtl8188EFWImgArrayLength
+
+#define RTL8188E_FW_UMC_IMG "rtl8188E\\rtl8188efw.bin"
+#define RTL8188E_PHY_REG "rtl8188E\\PHY_REG_1T.txt"
+#define RTL8188E_PHY_RADIO_A "rtl8188E\\radio_a_1T.txt"
+#define RTL8188E_PHY_RADIO_B "rtl8188E\\radio_b_1T.txt"
+#define RTL8188E_AGC_TAB "rtl8188E\\AGC_TAB_1T.txt"
+#define RTL8188E_PHY_MACREG "rtl8188E\\MAC_REG.txt"
+#define RTL8188E_PHY_REG_PG "rtl8188E\\PHY_REG_PG.txt"
+#define RTL8188E_PHY_REG_MP "rtl8188E\\PHY_REG_MP.txt"
+
+/* RTL8188E Power Configuration CMDs for USB/SDIO interfaces */
+#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow
+#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow
+#define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow
+#define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow
+#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow
+#define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow
+#define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow
+#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow
+#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow
+
+#define DRVINFO_SZ 4 /* unit is 8bytes */
+#define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len) & 0x7F ? 1 : 0))
+
+/* download firmware related data structure */
+#define FW_8188E_SIZE 0x4000 /* 16384,16k */
+#define FW_8188E_START_ADDRESS 0x1000
+#define FW_8188E_END_ADDRESS 0x1FFF /* 0x5FFF */
+
+#define MAX_PAGE_SIZE 4096 /* @ page : 4k bytes */
+
+#define IS_FW_HEADER_EXIST(_pFwHdr) \
+ ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 || \
+ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 || \
+ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300 || \
+ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88E0)
+
+/* This structure must be careful with byte-ordering */
+
+struct rt_firmware_hdr {
+ /* 8-byte alinment required */
+ /* LONG WORD 0 ---- */
+ __le16 Signature; /* 92C0: test chip; 92C,
+ * 88C0: test chip; 88C1: MP A-cut;
+ * 92C1: MP A-cut */
+ u8 Category; /* AP/NIC and USB/PCI */
+ u8 Function; /* Reserved for different FW function
+ * indcation, for further use when
+ * driver needs to download different
+ * FW for different conditions */
+ __le16 Version; /* FW Version */
+ u8 Subversion; /* FW Subversion, default 0x00 */
+ u16 Rsvd1;
+
+ /* LONG WORD 1 ---- */
+ u8 Month; /* Release time Month field */
+ u8 Date; /* Release time Date field */
+ u8 Hour; /* Release time Hour field */
+ u8 Minute; /* Release time Minute field */
+ __le16 RamCodeSize; /* The size of RAM code */
+ u8 Foundry;
+ u8 Rsvd2;
+
+ /* LONG WORD 2 ---- */
+ __le32 SvnIdx; /* The SVN entry index */
+ u32 Rsvd3;
+
+ /* LONG WORD 3 ---- */
+ u32 Rsvd4;
+ u32 Rsvd5;
+};
+
+#define DRIVER_EARLY_INT_TIME 0x05
+#define BCN_DMA_ATIME_INT_TIME 0x02
+
+enum usb_rx_agg_mode {
+ USB_RX_AGG_DISABLE,
+ USB_RX_AGG_DMA,
+ USB_RX_AGG_USB,
+ USB_RX_AGG_MIX
+};
+
+#define MAX_RX_DMA_BUFFER_SIZE_88E \
+ 0x2400 /* 9k for 88E nornal chip , MaxRxBuff=10k-max(TxReportSize(64*8),
+ * WOLPattern(16*24)) */
+
+#define MAX_TX_REPORT_BUFFER_SIZE 0x0400 /* 1k */
+
+/* BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON. */
+#define MAX_TX_QUEUE 9
+
+#define TX_SELE_HQ BIT(0) /* High Queue */
+#define TX_SELE_LQ BIT(1) /* Low Queue */
+#define TX_SELE_NQ BIT(2) /* Normal Queue */
+
+/* Note: We will divide number of page equally for each queue other
+ * than public queue! */
+/* 22k = 22528 bytes = 176 pages (@page = 128 bytes) */
+/* must reserved about 7 pages for LPS => 176-7 = 169 (0xA9) */
+/* 2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS
+ * null-data */
+
+#define TX_TOTAL_PAGE_NUMBER_88E 0xA9/* 169 (21632=> 21k) */
+
+#define TX_PAGE_BOUNDARY_88E (TX_TOTAL_PAGE_NUMBER_88E + 1)
+
+/* Note: For Normal Chip Setting ,modify later */
+#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER \
+ TX_TOTAL_PAGE_NUMBER_88E /* 0xA9 , 0xb0=>176=>22k */
+#define WMM_NORMAL_TX_PAGE_BOUNDARY_88E \
+ (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER + 1) /* 0xA9 */
+
+/* Chip specific */
+#define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3)
+#define CHIP_BONDING_92C_1T2R 0x1
+#define CHIP_BONDING_88C_USB_MCARD 0x2
+#define CHIP_BONDING_88C_USB_HP 0x1
+#include "HalVerDef.h"
+#include "hal_com.h"
+
+/* Channel Plan */
+enum ChannelPlan {
+ CHPL_FCC = 0,
+ CHPL_IC = 1,
+ CHPL_ETSI = 2,
+ CHPL_SPA = 3,
+ CHPL_FRANCE = 4,
+ CHPL_MKK = 5,
+ CHPL_MKK1 = 6,
+ CHPL_ISRAEL = 7,
+ CHPL_TELEC = 8,
+ CHPL_GLOBAL = 9,
+ CHPL_WORLD = 10,
+};
+
+struct txpowerinfo24g {
+ u8 IndexCCK_Base[RF_PATH_MAX][MAX_CHNL_GROUP_24G];
+ u8 IndexBW40_Base[RF_PATH_MAX][MAX_CHNL_GROUP_24G];
+ /* If only one tx, only BW20 and OFDM are used. */
+ s8 CCK_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 OFDM_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 BW20_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 BW40_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+};
+
+#define EFUSE_REAL_CONTENT_LEN 512
+#define EFUSE_MAX_SECTION 16
+#define EFUSE_IC_ID_OFFSET 506 /* For some inferior IC purpose*/
+#define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN)
+/* To prevent out of boundary programming case, */
+/* leave 1byte and program full section */
+/* 9bytes + 1byt + 5bytes and pre 1byte. */
+/* For worst case: */
+/* | 1byte|----8bytes----|1byte|--5bytes--| */
+/* | | Reserved(14bytes) | */
+
+/* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */
+#define EFUSE_OOB_PROTECT_BYTES 15
+
+#define HWSET_MAX_SIZE_88E 512
+
+#define EFUSE_REAL_CONTENT_LEN_88E 256
+#define EFUSE_MAP_LEN_88E 512
+#define EFUSE_MAP_LEN EFUSE_MAP_LEN_88E
+#define EFUSE_MAX_SECTION_88E 64
+#define EFUSE_MAX_WORD_UNIT_88E 4
+#define EFUSE_IC_ID_OFFSET_88E 506
+#define AVAILABLE_EFUSE_ADDR_88E(addr) \
+ (addr < EFUSE_REAL_CONTENT_LEN_88E)
+/* To prevent out of boundary programming case, leave 1byte and program
+ * full section */
+/* 9bytes + 1byt + 5bytes and pre 1byte. */
+/* For worst case: */
+/* | 2byte|----8bytes----|1byte|--7bytes--| 92D */
+/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */
+#define EFUSE_OOB_PROTECT_BYTES_88E 18
+#define EFUSE_PROTECT_BYTES_BANK_88E 16
+
+/* EFUSE for BT definition */
+#define EFUSE_BT_REAL_CONTENT_LEN 1536 /* 512*3 */
+#define EFUSE_BT_MAP_LEN 1024 /* 1k bytes */
+#define EFUSE_BT_MAX_SECTION 128 /* 1024/8 */
+
+#define EFUSE_PROTECT_BYTES_BANK 16
+
+/* For RTL8723 WiFi/BT/GPS multi-function configuration. */
+enum rt_multi_func {
+ RT_MULTI_FUNC_NONE = 0x00,
+ RT_MULTI_FUNC_WIFI = 0x01,
+ RT_MULTI_FUNC_BT = 0x02,
+ RT_MULTI_FUNC_GPS = 0x04,
+};
+
+/* For RTL8723 regulator mode. */
+enum rt_regulator_mode {
+ RT_SWITCHING_REGULATOR = 0,
+ RT_LDO_REGULATOR = 1,
+};
+
+struct hal_data_8188e {
+ struct HAL_VERSION VersionID;
+ enum rt_multi_func MultiFunc; /* For multi-function consideration. */
+ enum rt_regulator_mode RegulatorMode; /* switching regulator or LDO */
+ u16 CustomerID;
+
+ u16 FirmwareVersion;
+ u16 FirmwareVersionRev;
+ u16 FirmwareSubVersion;
+ u16 FirmwareSignature;
+ u8 PGMaxGroup;
+ /* current WIFI_PHY values */
+ u32 ReceiveConfig;
+ enum wireless_mode CurrentWirelessMode;
+ enum ht_channel_width CurrentChannelBW;
+ u8 CurrentChannel;
+ u8 nCur40MhzPrimeSC;/* Control channel sub-carrier */
+
+ u16 BasicRateSet;
+
+ /* rf_ctrl */
+ u8 rf_chip;
+ u8 rf_type;
+ u8 NumTotalRFPath;
+
+ u8 BoardType;
+
+ /* EEPROM setting. */
+ u16 EEPROMVID;
+ u16 EEPROMPID;
+ u16 EEPROMSVID;
+ u16 EEPROMSDID;
+ u8 EEPROMCustomerID;
+ u8 EEPROMSubCustomerID;
+ u8 EEPROMVersion;
+ u8 EEPROMRegulatory;
+
+ u8 bTXPowerDataReadFromEEPORM;
+ u8 EEPROMThermalMeter;
+ u8 bAPKThermalMeterIgnore;
+
+ bool EepromOrEfuse;
+ /* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */
+ u8 EfuseMap[2][HWSET_MAX_SIZE_512];
+ u8 EfuseUsedPercentage;
+ struct efuse_hal EfuseHal;
+
+ u8 Index24G_CCK_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ u8 Index24G_BW40_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* If only one tx, only BW20 and OFDM are used. */
+ s8 CCK_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 OFDM_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 BW20_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 BW40_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+
+ u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* For HT 40MHZ pwr */
+ u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* For HT 40MHZ pwr */
+ u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* HT 20<->40 Pwr diff */
+ u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* For HT<->legacy pwr diff */
+ u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* For power group */
+ u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+
+ u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */
+ /* The current Tx Power Level */
+ u8 CurrentCckTxPwrIdx;
+ u8 CurrentOfdm24GTxPwrIdx;
+ u8 CurrentBW2024GTxPwrIdx;
+ u8 CurrentBW4024GTxPwrIdx;
+
+ /* Read/write are allow for following hardware information variables */
+ u8 framesync;
+ u32 framesyncC34;
+ u8 framesyncMonitor;
+ u8 DefaultInitialGain[4];
+ u8 pwrGroupCnt;
+ u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
+ u32 CCKTxPowerLevelOriginalOffset;
+
+ u8 CrystalCap;
+ u32 AntennaTxPath; /* Antenna path Tx */
+ u32 AntennaRxPath; /* Antenna path Rx */
+ u8 BluetoothCoexist;
+ u8 ExternalPA;
+
+ u8 bLedOpenDrain; /* Open-drain support for controlling the LED.*/
+
+ u8 b1x1RecvCombine; /* for 1T1R receive combining */
+
+ u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
+
+ struct bb_reg_def PHYRegDef[4]; /* Radio A/B/C/D */
+
+ u32 RfRegChnlVal[2];
+
+ /* RDG enable */
+ bool bRDGEnable;
+
+ /* for host message to fw */
+ u8 LastHMEBoxNum;
+
+ u8 fw_ractrl;
+ u8 RegTxPause;
+ /* Beacon function related global variable. */
+ u32 RegBcnCtrlVal;
+ u8 RegFwHwTxQCtrl;
+ u8 RegReg542;
+ u8 RegCR_1;
+
+ struct dm_priv dmpriv;
+ struct odm_dm_struct odmpriv;
+ struct sreset_priv srestpriv;
+
+ u8 CurAntenna;
+ u8 AntDivCfg;
+ u8 TRxAntDivType;
+
+ u8 bDumpRxPkt;/* for debug */
+ u8 bDumpTxPkt;/* for debug */
+ u8 FwRsvdPageStartOffset; /* Reserve page start offset except
+ * beacon in TxQ. */
+
+ /* 2010/08/09 MH Add CU power down mode. */
+ bool pwrdown;
+
+ /* Add for dual MAC 0--Mac0 1--Mac1 */
+ u32 interfaceIndex;
+
+ u8 OutEpQueueSel;
+ u8 OutEpNumber;
+
+ /* Add for USB aggreation mode dynamic shceme. */
+ bool UsbRxHighSpeedMode;
+
+ /* 2010/11/22 MH Add for slim combo debug mode selective. */
+ /* This is used for fix the drawback of CU TSMC-A/UMC-A cut.
+ * HW auto suspend ability. Close BT clock. */
+ bool SlimComboDbg;
+
+ u16 EfuseUsedBytes;
+
+#ifdef CONFIG_88EU_P2P
+ struct P2P_PS_Offload_t p2p_ps_offload;
+#endif
+
+ /* Auto FSM to Turn On, include clock, isolation, power control
+ * for MAC only */
+ u8 bMacPwrCtrlOn;
+
+ u32 UsbBulkOutSize;
+
+ /* Interrupt relatd register information. */
+ u32 IntArray[3];/* HISR0,HISR1,HSISR */
+ u32 IntrMask[3];
+ u8 C2hArray[16];
+ u8 UsbTxAggMode;
+ u8 UsbTxAggDescNum;
+ u16 HwRxPageSize; /* Hardware setting */
+ u32 MaxUsbRxAggBlock;
+
+ enum usb_rx_agg_mode UsbRxAggMode;
+ u8 UsbRxAggBlockCount; /* USB Block count. Block size is
+ * 512-byte in high speed and 64-byte
+ * in full speed */
+ u8 UsbRxAggBlockTimeout;
+ u8 UsbRxAggPageCount; /* 8192C DMA page count */
+ u8 UsbRxAggPageTimeout;
+};
+
+#define GET_HAL_DATA(__pAdapter) \
+ ((struct hal_data_8188e *)((__pAdapter)->HalData))
+#define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type)
+
+#define INCLUDE_MULTI_FUNC_BT(_Adapter) \
+ (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
+#define INCLUDE_MULTI_FUNC_GPS(_Adapter) \
+ (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
+
+/* rtl8188e_hal_init.c */
+s32 rtl8188e_FirmwareDownload(struct adapter *padapter);
+void _8051Reset88E(struct adapter *padapter);
+void rtl8188e_InitializeFirmwareVars(struct adapter *padapter);
+
+s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy);
+
+/* EFuse */
+u8 GetEEPROMSize8188E(struct adapter *padapter);
+void Hal_InitPGData88E(struct adapter *padapter);
+void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo);
+void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *hwinfo,
+ bool AutoLoadFail);
+
+void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter,u8 *PROMContent,
+ bool AutoLoadFail);
+void Hal_ReadThermalMeter_88E(struct adapter * dapter, u8 *PROMContent,
+ bool AutoloadFail);
+void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void Hal_ReadPowerSavingMode88E(struct adapter *pAdapter, u8 *hwinfo,
+ bool AutoLoadFail);
+
+bool HalDetectPwrDownMode88E(struct adapter *Adapter);
+
+void Hal_InitChannelPlan(struct adapter *padapter);
+void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc);
+
+/* register */
+void SetBcnCtrlReg(struct adapter *padapter, u8 SetBits, u8 ClearBits);
+
+void rtl8188e_clone_haldata(struct adapter *dst, struct adapter *src);
+void rtl8188e_start_thread(struct adapter *padapter);
+void rtl8188e_stop_thread(struct adapter *padapter);
+
+void rtw_IOL_cmd_tx_pkt_buf_dump(struct adapter *Adapter, int len);
+s32 rtl8188e_iol_efuse_patch(struct adapter *padapter);
+void rtw_cancel_all_timer(struct adapter *padapter);
+void _ps_open_RF(struct adapter *adapt);
+
+#endif /* __RTL8188E_HAL_H__ */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_led.h b/drivers/staging/r8188eu/include/rtl8188e_led.h
new file mode 100644
index 000000000000..9cb03d6565d3
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_led.h
@@ -0,0 +1,34 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_LED_H__
+#define __RTL8188E_LED_H__
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+/* */
+/* Interface to manipulate LED objects. */
+/* */
+void rtl8188eu_InitSwLeds(struct adapter *padapter);
+void rtl8188eu_DeInitSwLeds(struct adapter *padapter);
+void SwLedOn(struct adapter *padapter, struct LED_871x *pLed);
+void SwLedOff(struct adapter *padapter, struct LED_871x *pLed);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtl8188e_recv.h b/drivers/staging/r8188eu/include/rtl8188e_recv.h
new file mode 100644
index 000000000000..e2ef281c2c44
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_recv.h
@@ -0,0 +1,69 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_RECV_H__
+#define __RTL8188E_RECV_H__
+
+#define TX_RPT1_PKT_LEN 8
+
+#define RECV_BLK_SZ 512
+#define RECV_BLK_CNT 16
+#define RECV_BLK_TH RECV_BLK_CNT
+#define RECV_BULK_IN_ADDR 0x80
+#define RECV_INT_IN_ADDR 0x81
+
+#define NR_PREALLOC_RECV_SKB (8)
+
+#define NR_RECVBUFF (4)
+
+#define MAX_RECVBUF_SZ (15360) /* 15k < 16k */
+
+struct phy_stat {
+ unsigned int phydw0;
+ unsigned int phydw1;
+ unsigned int phydw2;
+ unsigned int phydw3;
+ unsigned int phydw4;
+ unsigned int phydw5;
+ unsigned int phydw6;
+ unsigned int phydw7;
+};
+
+/* Rx smooth factor */
+#define Rx_Smooth_Factor (20)
+
+enum rx_packet_type {
+ NORMAL_RX,/* Normal rx packet */
+ TX_REPORT1,/* CCX */
+ TX_REPORT2,/* TX RPT */
+ HIS_REPORT,/* USB HISR RPT */
+};
+
+#define INTERRUPT_MSG_FORMAT_LEN 60
+void rtl8188eu_init_recvbuf(struct adapter *padapter, struct recv_buf *buf);
+s32 rtl8188eu_init_recv_priv(struct adapter *padapter);
+void rtl8188eu_free_recv_priv(struct adapter * padapter);
+void rtl8188eu_recv_hdl(struct adapter * padapter, struct recv_buf *precvbuf);
+void rtl8188eu_recv_tasklet(void *priv);
+void rtl8188e_query_rx_phy_status(struct recv_frame *fr, struct phy_stat *phy);
+void rtl8188e_process_phy_info(struct adapter * padapter, void *prframe);
+void update_recvframe_phyinfo_88e(struct recv_frame *fra, struct phy_stat *phy);
+void update_recvframe_attrib_88e(struct recv_frame *fra, struct recv_stat *stat);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtl8188e_rf.h b/drivers/staging/r8188eu/include/rtl8188e_rf.h
new file mode 100644
index 000000000000..0ebdc369b542
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_rf.h
@@ -0,0 +1,35 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_RF_H__
+#define __RTL8188E_RF_H__
+
+#define RF6052_MAX_TX_PWR 0x3F
+#define RF6052_MAX_REG 0x3F
+#define RF6052_MAX_PATH 2
+
+int PHY_RF6052_Config8188E(struct adapter *Adapter);
+void rtl8188e_RF_ChangeTxPath(struct adapter *Adapter, u16 DataRate);
+void rtl8188e_PHY_RF6052SetBandwidth(struct adapter *Adapter,
+ enum ht_channel_width Bandwidth);
+void rtl8188e_PHY_RF6052SetCckTxPower(struct adapter *Adapter, u8 *level);
+void rtl8188e_PHY_RF6052SetOFDMTxPower(struct adapter *Adapter, u8 *ofdm,
+ u8 *pwrbw20, u8 *pwrbw40, u8 channel);
+
+#endif/* __RTL8188E_RF_H__ */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_spec.h b/drivers/staging/r8188eu/include/rtl8188e_spec.h
new file mode 100644
index 000000000000..3956f770a951
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_spec.h
@@ -0,0 +1,1438 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *******************************************************************************/
+#ifndef __RTL8188E_SPEC_H__
+#define __RTL8188E_SPEC_H__
+
+#ifndef BIT
+#define BIT(x) (1 << (x))
+#endif
+
+#define BIT0 0x00000001
+#define BIT1 0x00000002
+#define BIT2 0x00000004
+#define BIT3 0x00000008
+#define BIT4 0x00000010
+#define BIT5 0x00000020
+#define BIT6 0x00000040
+#define BIT7 0x00000080
+#define BIT8 0x00000100
+#define BIT9 0x00000200
+#define BIT10 0x00000400
+#define BIT11 0x00000800
+#define BIT12 0x00001000
+#define BIT13 0x00002000
+#define BIT14 0x00004000
+#define BIT15 0x00008000
+#define BIT16 0x00010000
+#define BIT17 0x00020000
+#define BIT18 0x00040000
+#define BIT19 0x00080000
+#define BIT20 0x00100000
+#define BIT21 0x00200000
+#define BIT22 0x00400000
+#define BIT23 0x00800000
+#define BIT24 0x01000000
+#define BIT25 0x02000000
+#define BIT26 0x04000000
+#define BIT27 0x08000000
+#define BIT28 0x10000000
+#define BIT29 0x20000000
+#define BIT30 0x40000000
+#define BIT31 0x80000000
+
+/* 8192C Regsiter offset definition */
+
+#define HAL_PS_TIMER_INT_DELAY 50 /* 50 microseconds */
+#define HAL_92C_NAV_UPPER_UNIT 128 /* micro-second */
+
+#define MAC_ADDR_LEN 6
+/* 8188E PKT_BUFF_ACCESS_CTRL value */
+#define TXPKT_BUF_SELECT 0x69
+#define RXPKT_BUF_SELECT 0xA5
+#define DISABLE_TRXPKT_BUF_ACCESS 0x0
+
+/* 0x0000h ~ 0x00FFh System Configuration */
+#define REG_SYS_ISO_CTRL 0x0000
+#define REG_SYS_FUNC_EN 0x0002
+#define REG_APS_FSMCO 0x0004
+#define REG_SYS_CLKR 0x0008
+#define REG_9346CR 0x000A
+#define REG_EE_VPD 0x000C
+#define REG_AFE_MISC 0x0010
+#define REG_SPS0_CTRL 0x0011
+#define REG_SPS_OCP_CFG 0x0018
+#define REG_RSV_CTRL 0x001C
+#define REG_RF_CTRL 0x001F
+#define REG_LDOA15_CTRL 0x0020
+#define REG_LDOV12D_CTRL 0x0021
+#define REG_LDOHCI12_CTRL 0x0022
+#define REG_LPLDO_CTRL 0x0023
+#define REG_AFE_XTAL_CTRL 0x0024
+#define REG_AFE_PLL_CTRL 0x0028
+#define REG_APE_PLL_CTRL_EXT 0x002c
+#define REG_EFUSE_CTRL 0x0030
+#define REG_EFUSE_TEST 0x0034
+#define REG_GPIO_MUXCFG 0x0040
+#define REG_GPIO_IO_SEL 0x0042
+#define REG_MAC_PINMUX_CFG 0x0043
+#define REG_GPIO_PIN_CTRL 0x0044
+#define REG_GPIO_INTM 0x0048
+#define REG_LEDCFG0 0x004C
+#define REG_LEDCFG1 0x004D
+#define REG_LEDCFG2 0x004E
+#define REG_LEDCFG3 0x004F
+#define REG_FSIMR 0x0050
+#define REG_FSISR 0x0054
+#define REG_HSIMR 0x0058
+#define REG_HSISR 0x005c
+#define REG_GPIO_PIN_CTRL_2 0x0060 /* RTL8723 WIFI/BT/GPS
+ * Multi-Function GPIO Pin Control. */
+#define REG_GPIO_IO_SEL_2 0x0062 /* RTL8723 WIFI/BT/GPS
+ * Multi-Function GPIO Select. */
+#define REG_BB_PAD_CTRL 0x0064
+#define REG_MULTI_FUNC_CTRL 0x0068 /* RTL8723 WIFI/BT/GPS
+ * Multi-Function control source. */
+#define REG_GPIO_OUTPUT 0x006c
+#define REG_AFE_XTAL_CTRL_EXT 0x0078 /* RTL8188E */
+#define REG_XCK_OUT_CTRL 0x007c /* RTL8188E */
+#define REG_MCUFWDL 0x0080
+#define REG_WOL_EVENT 0x0081 /* RTL8188E */
+#define REG_MCUTSTCFG 0x0084
+#define REG_HMEBOX_E0 0x0088
+#define REG_HMEBOX_E1 0x008A
+#define REG_HMEBOX_E2 0x008C
+#define REG_HMEBOX_E3 0x008E
+#define REG_HMEBOX_EXT_0 0x01F0
+#define REG_HMEBOX_EXT_1 0x01F4
+#define REG_HMEBOX_EXT_2 0x01F8
+#define REG_HMEBOX_EXT_3 0x01FC
+#define REG_HIMR_88E 0x00B0
+#define REG_HISR_88E 0x00B4
+#define REG_HIMRE_88E 0x00B8
+#define REG_HISRE_88E 0x00BC
+#define REG_EFUSE_ACCESS 0x00CF /* Efuse access protection
+ * for RTL8723 */
+#define REG_BIST_SCAN 0x00D0
+#define REG_BIST_RPT 0x00D4
+#define REG_BIST_ROM_RPT 0x00D8
+#define REG_USB_SIE_INTF 0x00E0
+#define REG_PCIE_MIO_INTF 0x00E4
+#define REG_PCIE_MIO_INTD 0x00E8
+#define REG_HPON_FSM 0x00EC
+#define REG_SYS_CFG 0x00F0
+#define REG_GPIO_OUTSTS 0x00F4 /* For RTL8723 only. */
+#define REG_TYPE_ID 0x00FC
+
+#define REG_MAC_PHY_CTRL_NORMAL 0x00f8
+
+/* 0x0100h ~ 0x01FFh MACTOP General Configuration */
+#define REG_CR 0x0100
+#define REG_PBP 0x0104
+#define REG_PKT_BUFF_ACCESS_CTRL 0x0106
+#define REG_TRXDMA_CTRL 0x010C
+#define REG_TRXFF_BNDY 0x0114
+#define REG_TRXFF_STATUS 0x0118
+#define REG_RXFF_PTR 0x011C
+/* define REG_HIMR 0x0120 */
+/* define REG_HISR 0x0124 */
+#define REG_HIMRE 0x0128
+#define REG_HISRE 0x012C
+#define REG_CPWM 0x012F
+#define REG_FWIMR 0x0130
+#define REG_FTIMR 0x0138
+#define REG_FWISR 0x0134
+#define REG_PKTBUF_DBG_CTRL 0x0140
+#define REG_PKTBUF_DBG_ADDR (REG_PKTBUF_DBG_CTRL)
+#define REG_RXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+2)
+#define REG_TXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+3)
+#define REG_RXPKTBUF_CTRL (REG_PKTBUF_DBG_CTRL+2)
+#define REG_PKTBUF_DBG_DATA_L 0x0144
+#define REG_PKTBUF_DBG_DATA_H 0x0148
+
+#define REG_TC0_CTRL 0x0150
+#define REG_TC1_CTRL 0x0154
+#define REG_TC2_CTRL 0x0158
+#define REG_TC3_CTRL 0x015C
+#define REG_TC4_CTRL 0x0160
+#define REG_TCUNIT_BASE 0x0164
+#define REG_MBIST_START 0x0174
+#define REG_MBIST_DONE 0x0178
+#define REG_MBIST_FAIL 0x017C
+#define REG_32K_CTRL 0x0194 /* RTL8188E */
+#define REG_C2HEVT_MSG_NORMAL 0x01A0
+#define REG_C2HEVT_CLEAR 0x01AF
+#define REG_MCUTST_1 0x01c0
+#define REG_FMETHR 0x01C8
+#define REG_HMETFR 0x01CC
+#define REG_HMEBOX_0 0x01D0
+#define REG_HMEBOX_1 0x01D4
+#define REG_HMEBOX_2 0x01D8
+#define REG_HMEBOX_3 0x01DC
+
+#define REG_LLT_INIT 0x01E0
+
+/* 0x0200h ~ 0x027Fh TXDMA Configuration */
+#define REG_RQPN 0x0200
+#define REG_FIFOPAGE 0x0204
+#define REG_TDECTRL 0x0208
+#define REG_TXDMA_OFFSET_CHK 0x020C
+#define REG_TXDMA_STATUS 0x0210
+#define REG_RQPN_NPQ 0x0214
+
+/* 0x0280h ~ 0x02FFh RXDMA Configuration */
+#define REG_RXDMA_AGG_PG_TH 0x0280
+#define REG_RXPKT_NUM 0x0284
+#define REG_RXDMA_STATUS 0x0288
+
+/* 0x0300h ~ 0x03FFh PCIe */
+#define REG_PCIE_CTRL_REG 0x0300
+#define REG_INT_MIG 0x0304 /* Interrupt Migration */
+#define REG_BCNQ_DESA 0x0308 /* TX Beacon Descr Address */
+#define REG_HQ_DESA 0x0310 /* TX High Queue Descr Addr */
+#define REG_MGQ_DESA 0x0318 /* TX Manage Queue Descr Addr*/
+#define REG_VOQ_DESA 0x0320 /* TX VO Queue Descr Addr */
+#define REG_VIQ_DESA 0x0328 /* TX VI Queue Descr Addr */
+#define REG_BEQ_DESA 0x0330 /* TX BE Queue Descr Addr */
+#define REG_BKQ_DESA 0x0338 /* TX BK Queue Descr Addr */
+#define REG_RX_DESA 0x0340 /* RX Queue Descr Addr */
+#define REG_MDIO 0x0354 /* MDIO for Access PCIE PHY */
+#define REG_DBG_SEL 0x0360 /* Debug Selection Register */
+#define REG_PCIE_HRPWM 0x0361 /* PCIe RPWM */
+#define REG_PCIE_HCPWM 0x0363 /* PCIe CPWM */
+#define REG_WATCH_DOG 0x0368
+
+/* RTL8723 series ------------------------------ */
+#define REG_PCIE_HISR 0x03A0
+
+/* spec version 11 */
+/* 0x0400h ~ 0x047Fh Protocol Configuration */
+#define REG_VOQ_INFORMATION 0x0400
+#define REG_VIQ_INFORMATION 0x0404
+#define REG_BEQ_INFORMATION 0x0408
+#define REG_BKQ_INFORMATION 0x040C
+#define REG_MGQ_INFORMATION 0x0410
+#define REG_HGQ_INFORMATION 0x0414
+#define REG_BCNQ_INFORMATION 0x0418
+#define REG_TXPKT_EMPTY 0x041A
+
+#define REG_CPU_MGQ_INFORMATION 0x041C
+#define REG_FWHW_TXQ_CTRL 0x0420
+#define REG_HWSEQ_CTRL 0x0423
+#define REG_TXPKTBUF_BCNQ_BDNY 0x0424
+#define REG_TXPKTBUF_MGQ_BDNY 0x0425
+#define REG_LIFETIME_EN 0x0426
+#define REG_MULTI_BCNQ_OFFSET 0x0427
+#define REG_SPEC_SIFS 0x0428
+#define REG_RL 0x042A
+#define REG_DARFRC 0x0430
+#define REG_RARFRC 0x0438
+#define REG_RRSR 0x0440
+#define REG_ARFR0 0x0444
+#define REG_ARFR1 0x0448
+#define REG_ARFR2 0x044C
+#define REG_ARFR3 0x0450
+#define REG_AGGLEN_LMT 0x0458
+#define REG_AMPDU_MIN_SPACE 0x045C
+#define REG_TXPKTBUF_WMAC_LBK_BF_HD 0x045D
+#define REG_FAST_EDCA_CTRL 0x0460
+#define REG_RD_RESP_PKT_TH 0x0463
+#define REG_INIRTS_RATE_SEL 0x0480
+/* define REG_INIDATA_RATE_SEL 0x0484 */
+#define REG_POWER_STATUS 0x04A4
+#define REG_POWER_STAGE1 0x04B4
+#define REG_POWER_STAGE2 0x04B8
+#define REG_PKT_VO_VI_LIFE_TIME 0x04C0
+#define REG_PKT_BE_BK_LIFE_TIME 0x04C2
+#define REG_STBC_SETTING 0x04C4
+#define REG_PROT_MODE_CTRL 0x04C8
+#define REG_MAX_AGGR_NUM 0x04CA
+#define REG_RTS_MAX_AGGR_NUM 0x04CB
+#define REG_BAR_MODE_CTRL 0x04CC
+#define REG_RA_TRY_RATE_AGG_LMT 0x04CF
+#define REG_EARLY_MODE_CONTROL 0x4D0
+#define REG_NQOS_SEQ 0x04DC
+#define REG_QOS_SEQ 0x04DE
+#define REG_NEED_CPU_HANDLE 0x04E0
+#define REG_PKT_LOSE_RPT 0x04E1
+#define REG_PTCL_ERR_STATUS 0x04E2
+#define REG_TX_RPT_CTRL 0x04EC
+#define REG_TX_RPT_TIME 0x04F0 /* 2 byte */
+#define REG_DUMMY 0x04FC
+
+/* 0x0500h ~ 0x05FFh EDCA Configuration */
+#define REG_EDCA_VO_PARAM 0x0500
+#define REG_EDCA_VI_PARAM 0x0504
+#define REG_EDCA_BE_PARAM 0x0508
+#define REG_EDCA_BK_PARAM 0x050C
+#define REG_BCNTCFG 0x0510
+#define REG_PIFS 0x0512
+#define REG_RDG_PIFS 0x0513
+#define REG_SIFS_CTX 0x0514
+#define REG_SIFS_TRX 0x0516
+#define REG_TSFTR_SYN_OFFSET 0x0518
+#define REG_AGGR_BREAK_TIME 0x051A
+#define REG_SLOT 0x051B
+#define REG_TX_PTCL_CTRL 0x0520
+#define REG_TXPAUSE 0x0522
+#define REG_DIS_TXREQ_CLR 0x0523
+#define REG_RD_CTRL 0x0524
+/* Format for offset 540h-542h: */
+/* [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting
+ * beacon content before TBTT. */
+/* [7:4]: Reserved. */
+/* [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding
+ * to send the beacon packet. */
+/* [23:20]: Reserved */
+/* Description: */
+/* | */
+/* |<--Setup--|--Hold------------>| */
+/* --------------|---------------------- */
+/* | */
+/* TBTT */
+/* Note: We cannot update beacon content to HW or send any AC packets during
+ * the time between Setup and Hold. */
+#define REG_TBTT_PROHIBIT 0x0540
+#define REG_RD_NAV_NXT 0x0544
+#define REG_NAV_PROT_LEN 0x0546
+#define REG_BCN_CTRL 0x0550
+#define REG_BCN_CTRL_1 0x0551
+#define REG_MBID_NUM 0x0552
+#define REG_DUAL_TSF_RST 0x0553
+#define REG_BCN_INTERVAL 0x0554
+#define REG_DRVERLYINT 0x0558
+#define REG_BCNDMATIM 0x0559
+#define REG_ATIMWND 0x055A
+#define REG_BCN_MAX_ERR 0x055D
+#define REG_RXTSF_OFFSET_CCK 0x055E
+#define REG_RXTSF_OFFSET_OFDM 0x055F
+#define REG_TSFTR 0x0560
+#define REG_TSFTR1 0x0568
+#define REG_ATIMWND_1 0x0570
+#define REG_PSTIMER 0x0580
+#define REG_TIMER0 0x0584
+#define REG_TIMER1 0x0588
+#define REG_ACMHWCTRL 0x05C0
+
+/* define REG_FW_TSF_SYNC_CNT 0x04A0 */
+#define REG_FW_RESET_TSF_CNT_1 0x05FC
+#define REG_FW_RESET_TSF_CNT_0 0x05FD
+#define REG_FW_BCN_DIS_CNT 0x05FE
+
+/* 0x0600h ~ 0x07FFh WMAC Configuration */
+#define REG_APSD_CTRL 0x0600
+#define REG_BWOPMODE 0x0603
+#define REG_TCR 0x0604
+#define REG_RCR 0x0608
+#define REG_RX_PKT_LIMIT 0x060C
+#define REG_RX_DLK_TIME 0x060D
+#define REG_RX_DRVINFO_SZ 0x060F
+
+#define REG_MACID 0x0610
+#define REG_BSSID 0x0618
+#define REG_MAR 0x0620
+#define REG_MBIDCAMCFG 0x0628
+
+#define REG_USTIME_EDCA 0x0638
+#define REG_MAC_SPEC_SIFS 0x063A
+
+/* 20100719 Joseph: Hardware register definition change. (HW datasheet v54) */
+/* [15:8]SIFS_R2T_OFDM, [7:0]SIFS_R2T_CCK */
+#define REG_R2T_SIFS 0x063C
+/* [15:8]SIFS_T2T_OFDM, [7:0]SIFS_T2T_CCK */
+#define REG_T2T_SIFS 0x063E
+#define REG_ACKTO 0x0640
+#define REG_CTS2TO 0x0641
+#define REG_EIFS 0x0642
+
+/* RXERR_RPT */
+#define RXERR_TYPE_OFDM_PPDU 0
+#define RXERR_TYPE_OFDM_false_ALARM 1
+#define RXERR_TYPE_OFDM_MPDU_OK 2
+#define RXERR_TYPE_OFDM_MPDU_FAIL 3
+#define RXERR_TYPE_CCK_PPDU 4
+#define RXERR_TYPE_CCK_false_ALARM 5
+#define RXERR_TYPE_CCK_MPDU_OK 6
+#define RXERR_TYPE_CCK_MPDU_FAIL 7
+#define RXERR_TYPE_HT_PPDU 8
+#define RXERR_TYPE_HT_false_ALARM 9
+#define RXERR_TYPE_HT_MPDU_TOTAL 10
+#define RXERR_TYPE_HT_MPDU_OK 11
+#define RXERR_TYPE_HT_MPDU_FAIL 12
+#define RXERR_TYPE_RX_FULL_DROP 15
+
+#define RXERR_COUNTER_MASK 0xFFFFF
+#define RXERR_RPT_RST BIT(27)
+#define _RXERR_RPT_SEL(type) ((type) << 28)
+
+/* Note: */
+/* The NAV upper value is very important to WiFi 11n 5.2.3 NAV test.
+ * The default value is always too small, but the WiFi TestPlan test
+ * by 25,000 microseconds of NAV through sending CTS in the air.
+ * We must update this value greater than 25,000 microseconds to pass
+ * the item. The offset of NAV_UPPER in 8192C Spec is incorrect, and
+ * the offset should be 0x0652. */
+#define REG_NAV_UPPER 0x0652 /* unit of 128 */
+
+/* WMA, BA, CCX */
+/* define REG_NAV_CTRL 0x0650 */
+#define REG_BACAMCMD 0x0654
+#define REG_BACAMCONTENT 0x0658
+#define REG_LBDLY 0x0660
+#define REG_FWDLY 0x0661
+#define REG_RXERR_RPT 0x0664
+#define REG_WMAC_TRXPTCL_CTL 0x0668
+
+/* Security */
+#define REG_CAMCMD 0x0670
+#define REG_CAMWRITE 0x0674
+#define REG_CAMREAD 0x0678
+#define REG_CAMDBG 0x067C
+#define REG_SECCFG 0x0680
+
+/* Power */
+#define REG_WOW_CTRL 0x0690
+#define REG_PS_RX_INFO 0x0692
+#define REG_UAPSD_TID 0x0693
+#define REG_WKFMCAM_CMD 0x0698
+#define REG_WKFMCAM_NUM_88E 0x698
+#define REG_RXFLTMAP0 0x06A0
+#define REG_RXFLTMAP1 0x06A2
+#define REG_RXFLTMAP2 0x06A4
+#define REG_BCN_PSR_RPT 0x06A8
+#define REG_BT_COEX_TABLE 0x06C0
+
+/* Hardware Port 2 */
+#define REG_MACID1 0x0700
+#define REG_BSSID1 0x0708
+
+/* 0xFE00h ~ 0xFE55h USB Configuration */
+#define REG_USB_INFO 0xFE17
+#define REG_USB_SPECIAL_OPTION 0xFE55
+#define REG_USB_DMA_AGG_TO 0xFE5B
+#define REG_USB_AGG_TO 0xFE5C
+#define REG_USB_AGG_TH 0xFE5D
+
+/* For normal chip */
+#define REG_NORMAL_SIE_VID 0xFE60 /* 0xFE60~0xFE61 */
+#define REG_NORMAL_SIE_PID 0xFE62 /* 0xFE62~0xFE63 */
+#define REG_NORMAL_SIE_OPTIONAL 0xFE64
+#define REG_NORMAL_SIE_EP 0xFE65 /* 0xFE65~0xFE67 */
+#define REG_NORMAL_SIE_PHY 0xFE68 /* 0xFE68~0xFE6B */
+#define REG_NORMAL_SIE_OPTIONAL2 0xFE6C
+#define REG_NORMAL_SIE_GPS_EP 0xFE6D /* 0xFE6D, for RTL8723 only. */
+#define REG_NORMAL_SIE_MAC_ADDR 0xFE70 /* 0xFE70~0xFE75 */
+#define REG_NORMAL_SIE_STRING 0xFE80 /* 0xFE80~0xFEDF */
+
+/* TODO: use these definition when using REG_xxx naming rule. */
+/* NOTE: DO NOT Remove these definition. Use later. */
+
+#define EFUSE_CTRL REG_EFUSE_CTRL /* E-Fuse Control. */
+#define EFUSE_TEST REG_EFUSE_TEST /* E-Fuse Test. */
+#define MSR (REG_CR + 2) /* Media Status reg */
+#define ISR REG_HISR_88E
+/* Timing Sync Function Timer Register. */
+#define TSFR REG_TSFTR
+
+#define PBP REG_PBP
+
+/* Redifine MACID register, to compatible prior ICs. */
+/* MAC ID Register, Offset 0x0050-0x0053 */
+#define IDR0 REG_MACID
+/* MAC ID Register, Offset 0x0054-0x0055 */
+#define IDR4 (REG_MACID + 4)
+
+/* 9. Security Control Registers (Offset: ) */
+/* IN 8190 Data Sheet is called CAMcmd */
+#define RWCAM REG_CAMCMD
+/* Software write CAM input content */
+#define WCAMI REG_CAMWRITE
+/* Software read/write CAM config */
+#define RCAMO REG_CAMREAD
+#define CAMDBG REG_CAMDBG
+/* Security Configuration Register */
+#define SECR REG_SECCFG
+
+/* Unused register */
+#define UnusedRegister 0x1BF
+#define DCAM UnusedRegister
+#define PSR UnusedRegister
+#define BBAddr UnusedRegister
+#define PhyDataR UnusedRegister
+
+/* Min Spacing related settings. */
+#define MAX_MSS_DENSITY_2T 0x13
+#define MAX_MSS_DENSITY_1T 0x0A
+
+/* EEPROM enable when set 1 */
+#define CmdEEPROM_En BIT5
+/* System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 */
+#define CmdEERPOMSEL BIT4
+#define Cmd9346CR_9356SEL BIT4
+
+/* 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) */
+#define GPIOSEL_GPIO 0
+#define GPIOSEL_ENBT BIT5
+
+/* 8192C GPIO PIN Control Register (offset 0x44, 4 byte) */
+/* GPIO pins input value */
+#define GPIO_IN REG_GPIO_PIN_CTRL
+/* GPIO pins output value */
+#define GPIO_OUT (REG_GPIO_PIN_CTRL+1)
+/* GPIO pins output enable when a bit is set to "1"; otherwise,
+ * input is configured. */
+#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2)
+#define GPIO_MOD (REG_GPIO_PIN_CTRL+3)
+
+/* 8723/8188E Host System Interrupt Mask Register (offset 0x58, 32 byte) */
+#define HSIMR_GPIO12_0_INT_EN BIT0
+#define HSIMR_SPS_OCP_INT_EN BIT5
+#define HSIMR_RON_INT_EN BIT6
+#define HSIMR_PDN_INT_EN BIT7
+#define HSIMR_GPIO9_INT_EN BIT25
+
+/* 8723/8188E Host System Interrupt Status Register (offset 0x5C, 32 byte) */
+#define HSISR_GPIO12_0_INT BIT0
+#define HSISR_SPS_OCP_INT BIT5
+#define HSISR_RON_INT_EN BIT6
+#define HSISR_PDNINT BIT7
+#define HSISR_GPIO9_INT BIT25
+
+/* 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) */
+/*
+Network Type
+00: No link
+01: Link in ad hoc network
+10: Link in infrastructure network
+11: AP mode
+Default: 00b.
+*/
+#define MSR_NOLINK 0x00
+#define MSR_ADHOC 0x01
+#define MSR_INFRA 0x02
+#define MSR_AP 0x03
+
+/* 88EU (MSR) Media Status Register (Offset 0x4C, 8 bits) */
+#define USB_INTR_CONTENT_C2H_OFFSET 0
+#define USB_INTR_CONTENT_CPWM1_OFFSET 16
+#define USB_INTR_CONTENT_CPWM2_OFFSET 20
+#define USB_INTR_CONTENT_HISR_OFFSET 48
+#define USB_INTR_CONTENT_HISRE_OFFSET 52
+
+/* 88E Driver Initialization Offload REG_FDHM0(Offset 0x88, 8 bits) */
+/* IOL config for REG_FDHM0(Reg0x88) */
+#define CMD_INIT_LLT BIT0
+#define CMD_READ_EFUSE_MAP BIT1
+#define CMD_EFUSE_PATCH BIT2
+#define CMD_IOCONFIG BIT3
+#define CMD_INIT_LLT_ERR BIT4
+#define CMD_READ_EFUSE_MAP_ERR BIT5
+#define CMD_EFUSE_PATCH_ERR BIT6
+#define CMD_IOCONFIG_ERR BIT7
+
+/* 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) */
+/* 8192C Response Rate Set Register (offset 0x181, 24bits) */
+#define RRSR_1M BIT0
+#define RRSR_2M BIT1
+#define RRSR_5_5M BIT2
+#define RRSR_11M BIT3
+#define RRSR_6M BIT4
+#define RRSR_9M BIT5
+#define RRSR_12M BIT6
+#define RRSR_18M BIT7
+#define RRSR_24M BIT8
+#define RRSR_36M BIT9
+#define RRSR_48M BIT10
+#define RRSR_54M BIT11
+#define RRSR_MCS0 BIT12
+#define RRSR_MCS1 BIT13
+#define RRSR_MCS2 BIT14
+#define RRSR_MCS3 BIT15
+#define RRSR_MCS4 BIT16
+#define RRSR_MCS5 BIT17
+#define RRSR_MCS6 BIT18
+#define RRSR_MCS7 BIT19
+
+/* 8192C Response Rate Set Register (offset 0x1BF, 8bits) */
+/* WOL bit information */
+#define HAL92C_WOL_PTK_UPDATE_EVENT BIT0
+#define HAL92C_WOL_GTK_UPDATE_EVENT BIT1
+
+/* 8192C BW_OPMODE bits (Offset 0x203, 8bit) */
+#define BW_OPMODE_20MHZ BIT2
+#define BW_OPMODE_5G BIT1
+
+/* 8192C CAM Config Setting (offset 0x250, 1 byte) */
+#define CAM_VALID BIT15
+#define CAM_NOTVALID 0x0000
+#define CAM_USEDK BIT5
+
+#define CAM_CONTENT_COUNT 8
+
+#define CAM_NONE 0x0
+#define CAM_WEP40 0x01
+#define CAM_TKIP 0x02
+#define CAM_AES 0x04
+#define CAM_WEP104 0x05
+#define CAM_SMS4 0x6
+
+#define TOTAL_CAM_ENTRY 32
+#define HALF_CAM_ENTRY 16
+
+#define CAM_CONFIG_USEDK true
+#define CAM_CONFIG_NO_USEDK false
+
+#define CAM_WRITE BIT16
+#define CAM_READ 0x00000000
+#define CAM_POLLINIG BIT31
+
+#define SCR_UseDK 0x01
+#define SCR_TxSecEnable 0x02
+#define SCR_RxSecEnable 0x04
+
+/* 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF) */
+#define WOW_PMEN BIT0 /* Power management Enable. */
+#define WOW_WOMEN BIT1 /* WoW function on or off. */
+#define WOW_MAGIC BIT2 /* Magic packet */
+#define WOW_UWF BIT3 /* Unicast Wakeup frame. */
+
+/* 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F) */
+/* 8188 IMR/ISR bits */
+#define IMR_DISABLED_88E 0x0
+/* IMR DW0(0x0060-0063) Bit 0-31 */
+#define IMR_TXCCK_88E BIT30 /* TXRPT interrupt when CCX bit of the packet is set */
+#define IMR_PSTIMEOUT_88E BIT29 /* Power Save Time Out Interrupt */
+#define IMR_GTINT4_88E BIT28 /* When GTIMER4 expires, this bit is set to 1 */
+#define IMR_GTINT3_88E BIT27 /* When GTIMER3 expires, this bit is set to 1 */
+#define IMR_TBDER_88E BIT26 /* Transmit Beacon0 Error */
+#define IMR_TBDOK_88E BIT25 /* Transmit Beacon0 OK */
+#define IMR_TSF_BIT32_TOGGLE_88E BIT24 /* TSF Timer BIT32 toggle indication interrupt */
+#define IMR_BCNDMAINT0_88E BIT20 /* Beacon DMA Interrupt 0 */
+#define IMR_BCNDERR0_88E BIT16 /* Beacon Queue DMA Error 0 */
+#define IMR_HSISR_IND_ON_INT_88E BIT15 /* HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) */
+#define IMR_BCNDMAINT_E_88E BIT14 /* Beacon DMA Interrupt Extension for Win7 */
+#define IMR_ATIMEND_88E BIT12 /* CTWidnow End or ATIM Window End */
+#define IMR_HISR1_IND_INT_88E BIT11 /* HISR1 Indicator (HISR1 & HIMR1 is true, this bit is set to 1) */
+#define IMR_C2HCMD_88E BIT10 /* CPU to Host Command INT Status, Write 1 clear */
+#define IMR_CPWM2_88E BIT9 /* CPU power Mode exchange INT Status, Write 1 clear */
+#define IMR_CPWM_88E BIT8 /* CPU power Mode exchange INT Status, Write 1 clear */
+#define IMR_HIGHDOK_88E BIT7 /* High Queue DMA OK */
+#define IMR_MGNTDOK_88E BIT6 /* Management Queue DMA OK */
+#define IMR_BKDOK_88E BIT5 /* AC_BK DMA OK */
+#define IMR_BEDOK_88E BIT4 /* AC_BE DMA OK */
+#define IMR_VIDOK_88E BIT3 /* AC_VI DMA OK */
+#define IMR_VODOK_88E BIT2 /* AC_VO DMA OK */
+#define IMR_RDU_88E BIT1 /* Rx Descriptor Unavailable */
+#define IMR_ROK_88E BIT0 /* Receive DMA OK */
+
+/* IMR DW1(0x00B4-00B7) Bit 0-31 */
+#define IMR_BCNDMAINT7_88E BIT27 /* Beacon DMA Interrupt 7 */
+#define IMR_BCNDMAINT6_88E BIT26 /* Beacon DMA Interrupt 6 */
+#define IMR_BCNDMAINT5_88E BIT25 /* Beacon DMA Interrupt 5 */
+#define IMR_BCNDMAINT4_88E BIT24 /* Beacon DMA Interrupt 4 */
+#define IMR_BCNDMAINT3_88E BIT23 /* Beacon DMA Interrupt 3 */
+#define IMR_BCNDMAINT2_88E BIT22 /* Beacon DMA Interrupt 2 */
+#define IMR_BCNDMAINT1_88E BIT21 /* Beacon DMA Interrupt 1 */
+#define IMR_BCNDERR7_88E BIT20 /* Beacon DMA Error Int 7 */
+#define IMR_BCNDERR6_88E BIT19 /* Beacon DMA Error Int 6 */
+#define IMR_BCNDERR5_88E BIT18 /* Beacon DMA Error Int 5 */
+#define IMR_BCNDERR4_88E BIT17 /* Beacon DMA Error Int 4 */
+#define IMR_BCNDERR3_88E BIT16 /* Beacon DMA Error Int 3 */
+#define IMR_BCNDERR2_88E BIT15 /* Beacon DMA Error Int 2 */
+#define IMR_BCNDERR1_88E BIT14 /* Beacon DMA Error Int 1 */
+#define IMR_ATIMEND_E_88E BIT13 /* ATIM Window End Ext for Win7 */
+#define IMR_TXERR_88E BIT11 /* Tx Err Flag Int Status, write 1 clear. */
+#define IMR_RXERR_88E BIT10 /* Rx Err Flag INT Status, Write 1 clear */
+#define IMR_TXFOVW_88E BIT9 /* Transmit FIFO Overflow */
+#define IMR_RXFOVW_88E BIT8 /* Receive FIFO Overflow */
+
+#define HAL_NIC_UNPLUG_ISR 0xFFFFFFFF /* The value when the NIC is unplugged for PCI. */
+
+/* 8192C EFUSE */
+#define HWSET_MAX_SIZE 256
+#define HWSET_MAX_SIZE_88E 512
+
+/*===================================================================
+=====================================================================
+Here the register defines are for 92C. When the define is as same with 92C,
+we will use the 92C's define for the consistency
+So the following defines for 92C is not entire!!!!!!
+=====================================================================
+=====================================================================*/
+/*
+Based on Datasheet V33---090401
+Register Summary
+Current IOREG MAP
+0x0000h ~ 0x00FFh System Configuration (256 Bytes)
+0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes)
+0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes)
+0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes)
+0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes)
+0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes)
+0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes)
+0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes)
+0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes)
+*/
+/* 8192C (TXPAUSE) transmission pause (Offset 0x522, 8 bits) */
+/* Note: */
+/* The bits of stopping AC(VO/VI/BE/BK) queue in datasheet
+ * RTL8192S/RTL8192C are wrong, */
+/* the correct arragement is VO - Bit0, VI - Bit1, BE - Bit2,
+ * and BK - Bit3. */
+/* 8723 and 88E may be not correct either in the earlier version. */
+#define StopBecon BIT6
+#define StopHigh BIT5
+#define StopMgt BIT4
+#define StopBK BIT3
+#define StopBE BIT2
+#define StopVI BIT1
+#define StopVO BIT0
+
+/* 8192C (RCR) Receive Configuration Register(Offset 0x608, 32 bits) */
+#define RCR_APPFCS BIT31 /* WMAC append FCS after payload */
+#define RCR_APP_MIC BIT30
+#define RCR_APP_PHYSTS BIT28
+#define RCR_APP_ICV BIT29
+#define RCR_APP_PHYST_RXFF BIT28
+#define RCR_APP_BA_SSN BIT27 /* Accept BA SSN */
+#define RCR_ENMBID BIT24 /* Enable Multiple BssId. */
+#define RCR_LSIGEN BIT23
+#define RCR_MFBEN BIT22
+#define RCR_HTC_LOC_CTRL BIT14 /* MFC<--HTC=1 MFC-->HTC=0 */
+#define RCR_AMF BIT13 /* Accept management type frame */
+#define RCR_ACF BIT12 /* Accept control type frame */
+#define RCR_ADF BIT11 /* Accept data type frame */
+#define RCR_AICV BIT9 /* Accept ICV error packet */
+#define RCR_ACRC32 BIT8 /* Accept CRC32 error packet */
+#define RCR_CBSSID_BCN BIT7 /* Accept BSSID match packet
+ * (Rx beacon, probe rsp) */
+#define RCR_CBSSID_DATA BIT6 /* Accept BSSID match (Data)*/
+#define RCR_CBSSID RCR_CBSSID_DATA /* Accept BSSID match */
+#define RCR_APWRMGT BIT5 /* Accept power management pkt*/
+#define RCR_ADD3 BIT4 /* Accept address 3 match pkt */
+#define RCR_AB BIT3 /* Accept broadcast packet */
+#define RCR_AM BIT2 /* Accept multicast packet */
+#define RCR_APM BIT1 /* Accept physical match pkt */
+#define RCR_AAP BIT0 /* Accept all unicast packet */
+#define RCR_MXDMA_OFFSET 8
+#define RCR_FIFO_OFFSET 13
+
+/* 0xFE00h ~ 0xFE55h USB Configuration */
+#define REG_USB_INFO 0xFE17
+#define REG_USB_SPECIAL_OPTION 0xFE55
+#define REG_USB_DMA_AGG_TO 0xFE5B
+#define REG_USB_AGG_TO 0xFE5C
+#define REG_USB_AGG_TH 0xFE5D
+
+#define REG_USB_HRPWM 0xFE58
+#define REG_USB_HCPWM 0xFE57
+/* 8192C Regsiter Bit and Content definition */
+/* 0x0000h ~ 0x00FFh System Configuration */
+
+/* 2 SYS_ISO_CTRL */
+#define ISO_MD2PP BIT(0)
+#define ISO_UA2USB BIT(1)
+#define ISO_UD2CORE BIT(2)
+#define ISO_PA2PCIE BIT(3)
+#define ISO_PD2CORE BIT(4)
+#define ISO_IP2MAC BIT(5)
+#define ISO_DIOP BIT(6)
+#define ISO_DIOE BIT(7)
+#define ISO_EB2CORE BIT(8)
+#define ISO_DIOR BIT(9)
+#define PWC_EV12V BIT(15)
+
+/* 2 SYS_FUNC_EN */
+#define FEN_BBRSTB BIT(0)
+#define FEN_BB_GLB_RSTn BIT(1)
+#define FEN_USBA BIT(2)
+#define FEN_UPLL BIT(3)
+#define FEN_USBD BIT(4)
+#define FEN_DIO_PCIE BIT(5)
+#define FEN_PCIEA BIT(6)
+#define FEN_PPLL BIT(7)
+#define FEN_PCIED BIT(8)
+#define FEN_DIOE BIT(9)
+#define FEN_CPUEN BIT(10)
+#define FEN_DCORE BIT(11)
+#define FEN_ELDR BIT(12)
+#define FEN_DIO_RF BIT(13)
+#define FEN_HWPDN BIT(14)
+#define FEN_MREGEN BIT(15)
+
+/* 2 APS_FSMCO */
+#define PFM_LDALL BIT(0)
+#define PFM_ALDN BIT(1)
+#define PFM_LDKP BIT(2)
+#define PFM_WOWL BIT(3)
+#define EnPDN BIT(4)
+#define PDN_PL BIT(5)
+#define APFM_ONMAC BIT(8)
+#define APFM_OFF BIT(9)
+#define APFM_RSM BIT(10)
+#define AFSM_HSUS BIT(11)
+#define AFSM_PCIE BIT(12)
+#define APDM_MAC BIT(13)
+#define APDM_HOST BIT(14)
+#define APDM_HPDN BIT(15)
+#define RDY_MACON BIT(16)
+#define SUS_HOST BIT(17)
+#define ROP_ALD BIT(20)
+#define ROP_PWR BIT(21)
+#define ROP_SPS BIT(22)
+#define SOP_MRST BIT(25)
+#define SOP_FUSE BIT(26)
+#define SOP_ABG BIT(27)
+#define SOP_AMB BIT(28)
+#define SOP_RCK BIT(29)
+#define SOP_A8M BIT(30)
+#define XOP_BTCK BIT(31)
+
+/* 2 SYS_CLKR */
+#define ANAD16V_EN BIT(0)
+#define ANA8M BIT(1)
+#define MACSLP BIT(4)
+#define LOADER_CLK_EN BIT(5)
+
+/* 2 9346CR */
+
+#define BOOT_FROM_EEPROM BIT(4)
+#define EEPROM_EN BIT(5)
+
+/* 2 SPS0_CTRL */
+
+/* 2 SPS_OCP_CFG */
+
+/* 2 RF_CTRL */
+#define RF_EN BIT(0)
+#define RF_RSTB BIT(1)
+#define RF_SDMRSTB BIT(2)
+
+/* 2 LDOV12D_CTRL */
+#define LDV12_EN BIT(0)
+#define LDV12_SDBY BIT(1)
+#define LPLDO_HSM BIT(2)
+#define LPLDO_LSM_DIS BIT(3)
+#define _LDV12_VADJ(x) (((x) & 0xF) << 4)
+
+/* 2EFUSE_CTRL */
+#define ALD_EN BIT(18)
+#define EF_PD BIT(19)
+#define EF_FLAG BIT(31)
+
+/* 2 EFUSE_TEST (For RTL8723 partially) */
+#define EF_TRPT BIT(7)
+/* 00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2 */
+#define EF_CELL_SEL (BIT(8)|BIT(9))
+#define LDOE25_EN BIT(31)
+#define EFUSE_SEL(x) (((x) & 0x3) << 8)
+#define EFUSE_SEL_MASK 0x300
+#define EFUSE_WIFI_SEL_0 0x0
+#define EFUSE_BT_SEL_0 0x1
+#define EFUSE_BT_SEL_1 0x2
+#define EFUSE_BT_SEL_2 0x3
+
+#define EFUSE_ACCESS_ON 0x69 /* For RTL8723 only. */
+#define EFUSE_ACCESS_OFF 0x00 /* For RTL8723 only. */
+
+/* 2 8051FWDL */
+/* 2 MCUFWDL */
+#define MCUFWDL_EN BIT(0)
+#define MCUFWDL_RDY BIT(1)
+#define FWDL_ChkSum_rpt BIT(2)
+#define MACINI_RDY BIT(3)
+#define BBINI_RDY BIT(4)
+#define RFINI_RDY BIT(5)
+#define WINTINI_RDY BIT(6)
+#define RAM_DL_SEL BIT(7) /* 1:RAM, 0:ROM */
+#define ROM_DLEN BIT(19)
+#define CPRST BIT(23)
+
+/* 2 REG_SYS_CFG */
+#define XCLK_VLD BIT(0)
+#define ACLK_VLD BIT(1)
+#define UCLK_VLD BIT(2)
+#define PCLK_VLD BIT(3)
+#define PCIRSTB BIT(4)
+#define V15_VLD BIT(5)
+#define SW_OFFLOAD_EN BIT(7)
+#define SIC_IDLE BIT(8)
+#define BD_MAC2 BIT(9)
+#define BD_MAC1 BIT(10)
+#define IC_MACPHY_MODE BIT(11)
+#define CHIP_VER (BIT(12)|BIT(13)|BIT(14)|BIT(15))
+#define BT_FUNC BIT(16)
+#define VENDOR_ID BIT(19)
+#define PAD_HWPD_IDN BIT(22)
+#define TRP_VAUX_EN BIT(23) /* RTL ID */
+#define TRP_BT_EN BIT(24)
+#define BD_PKG_SEL BIT(25)
+#define BD_HCI_SEL BIT(26)
+#define TYPE_ID BIT(27)
+
+#define CHIP_VER_RTL_MASK 0xF000 /* Bit 12 ~ 15 */
+#define CHIP_VER_RTL_SHIFT 12
+
+/* 2REG_GPIO_OUTSTS (For RTL8723 only) */
+#define EFS_HCI_SEL (BIT(0)|BIT(1))
+#define PAD_HCI_SEL (BIT(2)|BIT(3))
+#define HCI_SEL (BIT(4)|BIT(5))
+#define PKG_SEL_HCI BIT(6)
+#define FEN_GPS BIT(7)
+#define FEN_BT BIT(8)
+#define FEN_WL BIT(9)
+#define FEN_PCI BIT(10)
+#define FEN_USB BIT(11)
+#define BTRF_HWPDN_N BIT(12)
+#define WLRF_HWPDN_N BIT(13)
+#define PDN_BT_N BIT(14)
+#define PDN_GPS_N BIT(15)
+#define BT_CTL_HWPDN BIT(16)
+#define GPS_CTL_HWPDN BIT(17)
+#define PPHY_SUSB BIT(20)
+#define UPHY_SUSB BIT(21)
+#define PCI_SUSEN BIT(22)
+#define USB_SUSEN BIT(23)
+#define RF_RL_ID (BIT(31)|BIT(30)|BIT(29)|BIT(28))
+
+/* 2SYS_CFG */
+#define RTL_ID BIT(23) /* TestChip ID, 1:Test(RLE); 0:MP(RL) */
+
+/* 0x0100h ~ 0x01FFh MACTOP General Configuration */
+
+/* 2 Function Enable Registers */
+/* 2 CR */
+
+#define HCI_TXDMA_EN BIT(0)
+#define HCI_RXDMA_EN BIT(1)
+#define TXDMA_EN BIT(2)
+#define RXDMA_EN BIT(3)
+#define PROTOCOL_EN BIT(4)
+#define SCHEDULE_EN BIT(5)
+#define MACTXEN BIT(6)
+#define MACRXEN BIT(7)
+#define ENSWBCN BIT(8)
+#define ENSEC BIT(9)
+#define CALTMR_EN BIT(10) /* 32k CAL TMR enable */
+
+/* Network type */
+#define _NETTYPE(x) (((x) & 0x3) << 16)
+#define MASK_NETTYPE 0x30000
+#define NT_NO_LINK 0x0
+#define NT_LINK_AD_HOC 0x1
+#define NT_LINK_AP 0x2
+#define NT_AS_AP 0x3
+
+/* 2 PBP - Page Size Register */
+#define GET_RX_PAGE_SIZE(value) ((value) & 0xF)
+#define GET_TX_PAGE_SIZE(value) (((value) & 0xF0) >> 4)
+#define _PSRX_MASK 0xF
+#define _PSTX_MASK 0xF0
+#define _PSRX(x) (x)
+#define _PSTX(x) ((x) << 4)
+
+#define PBP_64 0x0
+#define PBP_128 0x1
+#define PBP_256 0x2
+#define PBP_512 0x3
+#define PBP_1024 0x4
+
+/* 2 TX/RXDMA */
+#define RXDMA_ARBBW_EN BIT(0)
+#define RXSHFT_EN BIT(1)
+#define RXDMA_AGG_EN BIT(2)
+#define QS_VO_QUEUE BIT(8)
+#define QS_VI_QUEUE BIT(9)
+#define QS_BE_QUEUE BIT(10)
+#define QS_BK_QUEUE BIT(11)
+#define QS_MANAGER_QUEUE BIT(12)
+#define QS_HIGH_QUEUE BIT(13)
+
+#define HQSEL_VOQ BIT(0)
+#define HQSEL_VIQ BIT(1)
+#define HQSEL_BEQ BIT(2)
+#define HQSEL_BKQ BIT(3)
+#define HQSEL_MGTQ BIT(4)
+#define HQSEL_HIQ BIT(5)
+
+/* For normal driver, 0x10C */
+#define _TXDMA_HIQ_MAP(x) (((x)&0x3) << 14)
+#define _TXDMA_MGQ_MAP(x) (((x)&0x3) << 12)
+#define _TXDMA_BKQ_MAP(x) (((x)&0x3) << 10)
+#define _TXDMA_BEQ_MAP(x) (((x)&0x3) << 8 )
+#define _TXDMA_VIQ_MAP(x) (((x)&0x3) << 6 )
+#define _TXDMA_VOQ_MAP(x) (((x)&0x3) << 4 )
+
+#define QUEUE_LOW 1
+#define QUEUE_NORMAL 2
+#define QUEUE_HIGH 3
+
+/* 2 TRXFF_BNDY */
+
+/* 2 LLT_INIT */
+#define _LLT_NO_ACTIVE 0x0
+#define _LLT_WRITE_ACCESS 0x1
+#define _LLT_READ_ACCESS 0x2
+
+#define _LLT_INIT_DATA(x) ((x) & 0xFF)
+#define _LLT_INIT_ADDR(x) (((x) & 0xFF) << 8)
+#define _LLT_OP(x) (((x) & 0x3) << 30)
+#define _LLT_OP_VALUE(x) (((x) >> 30) & 0x3)
+
+/* 0x0200h ~ 0x027Fh TXDMA Configuration */
+/* 2RQPN */
+#define _HPQ(x) ((x) & 0xFF)
+#define _LPQ(x) (((x) & 0xFF) << 8)
+#define _PUBQ(x) (((x) & 0xFF) << 16)
+/* NOTE: in RQPN_NPQ register */
+#define _NPQ(x) ((x) & 0xFF)
+
+#define HPQ_PUBLIC_DIS BIT(24)
+#define LPQ_PUBLIC_DIS BIT(25)
+#define LD_RQPN BIT(31)
+
+/* 2TDECTRL */
+#define BCN_VALID BIT(16)
+#define BCN_HEAD(x) (((x) & 0xFF) << 8)
+#define BCN_HEAD_MASK 0xFF00
+
+/* 2 TDECTL */
+#define BLK_DESC_NUM_SHIFT 4
+#define BLK_DESC_NUM_MASK 0xF
+
+/* 2 TXDMA_OFFSET_CHK */
+#define DROP_DATA_EN BIT(9)
+
+/* 0x0280h ~ 0x028Bh RX DMA Configuration */
+
+/* REG_RXDMA_CONTROL, 0x0286h */
+
+/* 2 REG_RXPKT_NUM, 0x0284 */
+#define RXPKT_RELEASE_POLL BIT(16)
+#define RXDMA_IDLE BIT(17)
+#define RW_RELEASE_EN BIT(18)
+
+/* 0x0400h ~ 0x047Fh Protocol Configuration */
+/* 2 FWHW_TXQ_CTRL */
+#define EN_AMPDU_RTY_NEW BIT(7)
+
+/* 2 SPEC SIFS */
+#define _SPEC_SIFS_CCK(x) ((x) & 0xFF)
+#define _SPEC_SIFS_OFDM(x) (((x) & 0xFF) << 8)
+
+/* 2 RL */
+#define RETRY_LIMIT_SHORT_SHIFT 8
+#define RETRY_LIMIT_LONG_SHIFT 0
+
+/* 0x0500h ~ 0x05FFh EDCA Configuration */
+
+/* 2 EDCA setting */
+#define AC_PARAM_TXOP_LIMIT_OFFSET 16
+#define AC_PARAM_ECW_MAX_OFFSET 12
+#define AC_PARAM_ECW_MIN_OFFSET 8
+#define AC_PARAM_AIFS_OFFSET 0
+
+#define _LRL(x) ((x) & 0x3F)
+#define _SRL(x) (((x) & 0x3F) << 8)
+
+/* 2 BCN_CTRL */
+#define EN_MBSSID BIT(1)
+#define EN_TXBCN_RPT BIT(2)
+#define EN_BCN_FUNCTION BIT(3)
+#define DIS_TSF_UPDATE BIT(3)
+
+/* The same function but different bit field. */
+#define DIS_TSF_UDT0_NORMAL_CHIP BIT(4)
+#define DIS_TSF_UDT0_TEST_CHIP BIT(5)
+#define STOP_BCNQ BIT(6)
+
+/* 2 ACMHWCTRL */
+#define AcmHw_HwEn BIT(0)
+#define AcmHw_BeqEn BIT(1)
+#define AcmHw_ViqEn BIT(2)
+#define AcmHw_VoqEn BIT(3)
+#define AcmHw_BeqStatus BIT(4)
+#define AcmHw_ViqStatus BIT(5)
+#define AcmHw_VoqStatus BIT(6)
+
+/* 0x0600h ~ 0x07FFh WMAC Configuration */
+/* 2APSD_CTRL */
+#define APSDOFF BIT(6)
+#define APSDOFF_STATUS BIT(7)
+
+#define RATE_BITMAP_ALL 0xFFFFF
+
+/* Only use CCK 1M rate for ACK */
+#define RATE_RRSR_CCK_ONLY_1M 0xFFFF1
+
+/* 2 TCR */
+#define TSFRST BIT(0)
+#define DIS_GCLK BIT(1)
+#define PAD_SEL BIT(2)
+#define PWR_ST BIT(6)
+#define PWRBIT_OW_EN BIT(7)
+#define ACRC BIT(8)
+#define CFENDFORM BIT(9)
+#define ICV BIT(10)
+
+/* 2 RCR */
+#define AAP BIT(0)
+#define APM BIT(1)
+#define AM BIT(2)
+#define AB BIT(3)
+#define ADD3 BIT(4)
+#define APWRMGT BIT(5)
+#define CBSSID BIT(6)
+#define CBSSID_DATA BIT(6)
+#define CBSSID_BCN BIT(7)
+#define ACRC32 BIT(8)
+#define AICV BIT(9)
+#define ADF BIT(11)
+#define ACF BIT(12)
+#define AMF BIT(13)
+#define HTC_LOC_CTRL BIT(14)
+#define UC_DATA_EN BIT(16)
+#define BM_DATA_EN BIT(17)
+#define MFBEN BIT(22)
+#define LSIGEN BIT(23)
+#define EnMBID BIT(24)
+#define APP_BASSN BIT(27)
+#define APP_PHYSTS BIT(28)
+#define APP_ICV BIT(29)
+#define APP_MIC BIT(30)
+#define APP_FCS BIT(31)
+
+/* 2 SECCFG */
+#define SCR_TxUseDK BIT(0) /* Force Tx Use Default Key */
+#define SCR_RxUseDK BIT(1) /* Force Rx Use Default Key */
+#define SCR_TxEncEnable BIT(2) /* Enable Tx Encryption */
+#define SCR_RxDecEnable BIT(3) /* Enable Rx Decryption */
+#define SCR_SKByA2 BIT(4) /* Search kEY BY A2 */
+#define SCR_NoSKMC BIT(5) /* No Key Search Multicast */
+#define SCR_TXBCUSEDK BIT(6) /* Force Tx Bcast pkt Use Default Key */
+#define SCR_RXBCUSEDK BIT(7) /* Force Rx Bcast pkt Use Default Key */
+
+/* RTL8188E SDIO Configuration */
+
+/* I/O bus domain address mapping */
+#define SDIO_LOCAL_BASE 0x10250000
+#define WLAN_IOREG_BASE 0x10260000
+#define FIRMWARE_FIFO_BASE 0x10270000
+#define TX_HIQ_BASE 0x10310000
+#define TX_MIQ_BASE 0x10320000
+#define TX_LOQ_BASE 0x10330000
+#define RX_RX0FF_BASE 0x10340000
+
+/* SDIO host local register space mapping. */
+#define SDIO_LOCAL_MSK 0x0FFF
+#define WLAN_IOREG_MSK 0x7FFF
+#define WLAN_FIFO_MSK 0x1FFF /* Aggregation Length[12:0] */
+#define WLAN_RX0FF_MSK 0x0003
+
+/* Without ref to the SDIO Device ID */
+#define SDIO_WITHOUT_REF_DEVICE_ID 0
+#define SDIO_LOCAL_DEVICE_ID 0 /* 0b[16], 000b[15:13] */
+#define WLAN_TX_HIQ_DEVICE_ID 4 /* 0b[16], 100b[15:13] */
+#define WLAN_TX_MIQ_DEVICE_ID 5 /* 0b[16], 101b[15:13] */
+#define WLAN_TX_LOQ_DEVICE_ID 6 /* 0b[16], 110b[15:13] */
+#define WLAN_RX0FF_DEVICE_ID 7 /* 0b[16], 111b[15:13] */
+#define WLAN_IOREG_DEVICE_ID 8 /* 1b[16] */
+
+/* SDIO Tx Free Page Index */
+#define HI_QUEUE_IDX 0
+#define MID_QUEUE_IDX 1
+#define LOW_QUEUE_IDX 2
+#define PUBLIC_QUEUE_IDX 3
+
+#define SDIO_MAX_TX_QUEUE 3 /* HIQ, MIQ and LOQ */
+#define SDIO_MAX_RX_QUEUE 1
+
+/* SDIO Tx Control */
+#define SDIO_REG_TX_CTRL 0x0000
+/* SDIO Host Interrupt Mask */
+#define SDIO_REG_HIMR 0x0014
+/* SDIO Host Interrupt Service Routine */
+#define SDIO_REG_HISR 0x0018
+/* HCI Current Power Mode */
+#define SDIO_REG_HCPWM 0x0019
+/* RXDMA Request Length */
+#define SDIO_REG_RX0_REQ_LEN 0x001C
+/* Free Tx Buffer Page */
+#define SDIO_REG_FREE_TXPG 0x0020
+/* HCI Current Power Mode 1 */
+#define SDIO_REG_HCPWM1 0x0024
+/* HCI Current Power Mode 2 */
+#define SDIO_REG_HCPWM2 0x0026
+/* HTSF Informaion */
+#define SDIO_REG_HTSFR_INFO 0x0030
+/* HCI Request Power Mode 1 */
+#define SDIO_REG_HRPWM1 0x0080
+/* HCI Request Power Mode 2 */
+#define SDIO_REG_HRPWM2 0x0082
+/* HCI Power Save Clock */
+#define SDIO_REG_HPS_CLKR 0x0084
+/* SDIO HCI Suspend Control */
+#define SDIO_REG_HSUS_CTRL 0x0086
+/* SDIO Host Extension Interrupt Mask Always */
+#define SDIO_REG_HIMR_ON 0x0090
+/* SDIO Host Extension Interrupt Status Always */
+#define SDIO_REG_HISR_ON 0x0091
+
+#define SDIO_HIMR_DISABLED 0
+
+/* RTL8188E SDIO Host Interrupt Mask Register */
+#define SDIO_HIMR_RX_REQUEST_MSK BIT0
+#define SDIO_HIMR_AVAL_MSK BIT1
+#define SDIO_HIMR_TXERR_MSK BIT2
+#define SDIO_HIMR_RXERR_MSK BIT3
+#define SDIO_HIMR_TXFOVW_MSK BIT4
+#define SDIO_HIMR_RXFOVW_MSK BIT5
+#define SDIO_HIMR_TXBCNOK_MSK BIT6
+#define SDIO_HIMR_TXBCNERR_MSK BIT7
+#define SDIO_HIMR_BCNERLY_INT_MSK BIT16
+#define SDIO_HIMR_C2HCMD_MSK BIT17
+#define SDIO_HIMR_CPWM1_MSK BIT18
+#define SDIO_HIMR_CPWM2_MSK BIT19
+#define SDIO_HIMR_HSISR_IND_MSK BIT20
+#define SDIO_HIMR_GTINT3_IND_MSK BIT21
+#define SDIO_HIMR_GTINT4_IND_MSK BIT22
+#define SDIO_HIMR_PSTIMEOUT_MSK BIT23
+#define SDIO_HIMR_OCPINT_MSK BIT24
+#define SDIO_HIMR_ATIMEND_MSK BIT25
+#define SDIO_HIMR_ATIMEND_E_MSK BIT26
+#define SDIO_HIMR_CTWEND_MSK BIT27
+
+/* RTL8188E SDIO Specific */
+#define SDIO_HIMR_MCU_ERR_MSK BIT28
+#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT29
+
+/* SDIO Host Interrupt Service Routine */
+#define SDIO_HISR_RX_REQUEST BIT0
+#define SDIO_HISR_AVAL BIT1
+#define SDIO_HISR_TXERR BIT2
+#define SDIO_HISR_RXERR BIT3
+#define SDIO_HISR_TXFOVW BIT4
+#define SDIO_HISR_RXFOVW BIT5
+#define SDIO_HISR_TXBCNOK BIT6
+#define SDIO_HISR_TXBCNERR BIT7
+#define SDIO_HISR_BCNERLY_INT BIT16
+#define SDIO_HISR_C2HCMD BIT17
+#define SDIO_HISR_CPWM1 BIT18
+#define SDIO_HISR_CPWM2 BIT19
+#define SDIO_HISR_HSISR_IND BIT20
+#define SDIO_HISR_GTINT3_IND BIT21
+#define SDIO_HISR_GTINT4_IND BIT22
+#define SDIO_HISR_PSTIME BIT23
+#define SDIO_HISR_OCPINT BIT24
+#define SDIO_HISR_ATIMEND BIT25
+#define SDIO_HISR_ATIMEND_E BIT26
+#define SDIO_HISR_CTWEND BIT27
+
+/* RTL8188E SDIO Specific */
+#define SDIO_HISR_MCU_ERR BIT28
+#define SDIO_HISR_TSF_BIT32_TOGGLE BIT29
+
+#define MASK_SDIO_HISR_CLEAR \
+ (SDIO_HISR_TXERR | SDIO_HISR_RXERR | SDIO_HISR_TXFOVW |\
+ SDIO_HISR_RXFOVW | SDIO_HISR_TXBCNOK | SDIO_HISR_TXBCNERR |\
+ SDIO_HISR_C2HCMD | SDIO_HISR_CPWM1 | SDIO_HISR_CPWM2 |\
+ SDIO_HISR_HSISR_IND | SDIO_HISR_GTINT3_IND | SDIO_HISR_GTINT4_IND |\
+ SDIO_HISR_PSTIMEOUT | SDIO_HISR_OCPINT)
+
+/* SDIO HCI Suspend Control Register */
+#define HCI_RESUME_PWR_RDY BIT1
+#define HCI_SUS_CTRL BIT0
+
+/* SDIO Tx FIFO related */
+/* The number of Tx FIFO free page */
+#define SDIO_TX_FREE_PG_QUEUE 4
+#define SDIO_TX_FIFO_PAGE_SZ 128
+
+/* 0xFE00h ~ 0xFE55h USB Configuration */
+
+/* 2 USB Information (0xFE17) */
+#define USB_IS_HIGH_SPEED 0
+#define USB_IS_FULL_SPEED 1
+#define USB_SPEED_MASK BIT(5)
+
+#define USB_NORMAL_SIE_EP_MASK 0xF
+#define USB_NORMAL_SIE_EP_SHIFT 4
+
+/* 2 Special Option */
+#define USB_AGG_EN BIT(3)
+
+/* 0; Use interrupt endpoint to upload interrupt pkt */
+/* 1; Use bulk endpoint to upload interrupt pkt, */
+#define INT_BULK_SEL BIT(4)
+
+/* 2REG_C2HEVT_CLEAR */
+/* Set by driver and notify FW that the driver has read
+ * the C2H command message */
+#define C2H_EVT_HOST_CLOSE 0x00
+/* Set by FW indicating that FW had set the C2H command
+ * message and it's not yet read by driver. */
+#define C2H_EVT_FW_CLOSE 0xFF
+
+/* 2REG_MULTI_FUNC_CTRL(For RTL8723 Only) */
+/* Enable GPIO[9] as WiFi HW PDn source */
+#define WL_HWPDN_EN BIT0
+/* WiFi HW PDn polarity control */
+#define WL_HWPDN_SL BIT1
+/* WiFi function enable */
+#define WL_FUNC_EN BIT2
+/* Enable GPIO[9] as WiFi RF HW PDn source */
+#define WL_HWROF_EN BIT3
+/* Enable GPIO[11] as BT HW PDn source */
+#define BT_HWPDN_EN BIT16
+/* BT HW PDn polarity control */
+#define BT_HWPDN_SL BIT17
+/* BT function enable */
+#define BT_FUNC_EN BIT18
+/* Enable GPIO[11] as BT/GPS RF HW PDn source */
+#define BT_HWROF_EN BIT19
+/* Enable GPIO[10] as GPS HW PDn source */
+#define GPS_HWPDN_EN BIT20
+/* GPS HW PDn polarity control */
+#define GPS_HWPDN_SL BIT21
+/* GPS function enable */
+#define GPS_FUNC_EN BIT22
+
+/* 3 REG_LIFECTRL_CTRL */
+#define HAL92C_EN_PKT_LIFE_TIME_BK BIT3
+#define HAL92C_EN_PKT_LIFE_TIME_BE BIT2
+#define HAL92C_EN_PKT_LIFE_TIME_VI BIT1
+#define HAL92C_EN_PKT_LIFE_TIME_VO BIT0
+
+#define HAL92C_MSDU_LIFE_TIME_UNIT 128 /* in us */
+
+/* General definitions */
+#define LAST_ENTRY_OF_TX_PKT_BUFFER 176 /* 22k 22528 bytes */
+
+#define POLLING_LLT_THRESHOLD 20
+#define POLLING_READY_TIMEOUT_COUNT 1000
+/* GPIO BIT */
+#define HAL_8192C_HW_GPIO_WPS_BIT BIT2
+
+/* 8192C EEPROM/EFUSE share register definition. */
+
+/* EEPROM/Efuse PG Offset for 88EE/88EU/88ES */
+#define EEPROM_TX_PWR_INX_88E 0x10
+
+#define EEPROM_ChannelPlan_88E 0xB8
+#define EEPROM_XTAL_88E 0xB9
+#define EEPROM_THERMAL_METER_88E 0xBA
+#define EEPROM_IQK_LCK_88E 0xBB
+
+#define EEPROM_RF_BOARD_OPTION_88E 0xC1
+#define EEPROM_RF_FEATURE_OPTION_88E 0xC2
+#define EEPROM_RF_BT_SETTING_88E 0xC3
+#define EEPROM_VERSION_88E 0xC4
+#define EEPROM_CUSTOMERID_88E 0xC5
+#define EEPROM_RF_ANTENNA_OPT_88E 0xC9
+
+/* RTL88EE */
+#define EEPROM_MAC_ADDR_88EE 0xD0
+#define EEPROM_VID_88EE 0xD6
+#define EEPROM_DID_88EE 0xD8
+#define EEPROM_SVID_88EE 0xDA
+#define EEPROM_SMID_88EE 0xDC
+
+/* RTL88EU */
+#define EEPROM_MAC_ADDR_88EU 0xD7
+#define EEPROM_VID_88EU 0xD0
+#define EEPROM_PID_88EU 0xD2
+#define EEPROM_USB_OPTIONAL_FUNCTION0 0xD4
+
+/* RTL88ES */
+#define EEPROM_MAC_ADDR_88ES 0x11A
+
+/* EEPROM/Efuse Value Type */
+#define EETYPE_TX_PWR 0x0
+
+/* Default Value for EEPROM or EFUSE!!! */
+#define EEPROM_Default_TSSI 0x0
+#define EEPROM_Default_TxPowerDiff 0x0
+#define EEPROM_Default_CrystalCap 0x5
+/* Default: 2X2, RTL8192CE(QFPN68) */
+#define EEPROM_Default_BoardType 0x02
+#define EEPROM_Default_TxPower 0x1010
+#define EEPROM_Default_HT2T_TxPwr 0x10
+
+#define EEPROM_Default_LegacyHTTxPowerDiff 0x3
+#define EEPROM_Default_ThermalMeter 0x12
+
+#define EEPROM_Default_AntTxPowerDiff 0x0
+#define EEPROM_Default_TxPwDiff_CrystalCap 0x5
+#define EEPROM_Default_TxPowerLevel 0x2A
+
+#define EEPROM_Default_HT40_2SDiff 0x0
+/* HT20<->40 default Tx Power Index Difference */
+#define EEPROM_Default_HT20_Diff 2
+#define EEPROM_Default_LegacyHTTxPowerDiff 0x3
+#define EEPROM_Default_HT40_PwrMaxOffset 0
+#define EEPROM_Default_HT20_PwrMaxOffset 0
+
+#define EEPROM_Default_CrystalCap_88E 0x20
+#define EEPROM_Default_ThermalMeter_88E 0x18
+
+/* New EFUSE deafult value */
+#define EEPROM_DEFAULT_24G_INDEX 0x2D
+#define EEPROM_DEFAULT_24G_HT20_DIFF 0X02
+#define EEPROM_DEFAULT_24G_OFDM_DIFF 0X04
+
+#define EEPROM_DEFAULT_5G_INDEX 0X2A
+#define EEPROM_DEFAULT_5G_HT20_DIFF 0X00
+#define EEPROM_DEFAULT_5G_OFDM_DIFF 0X04
+
+#define EEPROM_DEFAULT_DIFF 0XFE
+#define EEPROM_DEFAULT_CHANNEL_PLAN 0x7F
+#define EEPROM_DEFAULT_BOARD_OPTION 0x00
+#define EEPROM_DEFAULT_FEATURE_OPTION 0x00
+#define EEPROM_DEFAULT_BT_OPTION 0x10
+
+/* For debug */
+#define EEPROM_Default_PID 0x1234
+#define EEPROM_Default_VID 0x5678
+#define EEPROM_Default_CustomerID 0xAB
+#define EEPROM_Default_CustomerID_8188E 0x00
+#define EEPROM_Default_SubCustomerID 0xCD
+#define EEPROM_Default_Version 0
+
+#define EEPROM_CHANNEL_PLAN_FCC 0x0
+#define EEPROM_CHANNEL_PLAN_IC 0x1
+#define EEPROM_CHANNEL_PLAN_ETSI 0x2
+#define EEPROM_CHANNEL_PLAN_SPA 0x3
+#define EEPROM_CHANNEL_PLAN_FRANCE 0x4
+#define EEPROM_CHANNEL_PLAN_MKK 0x5
+#define EEPROM_CHANNEL_PLAN_MKK1 0x6
+#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7
+#define EEPROM_CHANNEL_PLAN_TELEC 0x8
+#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMA 0x9
+#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA
+#define EEPROM_CHANNEL_PLAN_NCC 0xB
+#define EEPROM_USB_OPTIONAL1 0xE
+#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80
+
+#define EEPROM_CID_DEFAULT 0x0
+#define EEPROM_CID_TOSHIBA 0x4
+#define EEPROM_CID_CCX 0x10 /* CCX test. */
+#define EEPROM_CID_QMI 0x0D
+#define EEPROM_CID_WHQL 0xFE
+#define RTL_EEPROM_ID 0x8129
+
+#endif /* __RTL8188E_SPEC_H__ */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_sreset.h b/drivers/staging/r8188eu/include/rtl8188e_sreset.h
new file mode 100644
index 000000000000..a29e69519794
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_sreset.h
@@ -0,0 +1,31 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTL8188E_SRESET_H_
+#define _RTL8188E_SRESET_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <rtw_sreset.h>
+
+void rtl8188e_silentreset_for_specific_platform(struct adapter *padapter);
+void rtl8188e_sreset_xmit_status_check(struct adapter *padapter);
+void rtl8188e_sreset_linked_status_check(struct adapter *padapter);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtl8188e_xmit.h b/drivers/staging/r8188eu/include/rtl8188e_xmit.h
new file mode 100644
index 000000000000..5e586058826d
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_xmit.h
@@ -0,0 +1,177 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_XMIT_H__
+#define __RTL8188E_XMIT_H__
+
+#define MAX_TX_AGG_PACKET_NUMBER 0xFF
+/* */
+/* Queue Select Value in TxDesc */
+/* */
+#define QSLT_BK 0x2/* 0x01 */
+#define QSLT_BE 0x0
+#define QSLT_VI 0x5/* 0x4 */
+#define QSLT_VO 0x7/* 0x6 */
+#define QSLT_BEACON 0x10
+#define QSLT_HIGH 0x11
+#define QSLT_MGNT 0x12
+#define QSLT_CMD 0x13
+
+/* For 88e early mode */
+#define SET_EARLYMODE_PKTNUM(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr, 0, 3, __Value)
+#define SET_EARLYMODE_LEN0(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr, 4, 12, __Value)
+#define SET_EARLYMODE_LEN1(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr, 16, 12, __Value)
+#define SET_EARLYMODE_LEN2_1(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr, 28, 4, __Value)
+#define SET_EARLYMODE_LEN2_2(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr+4, 0, 8, __Value)
+#define SET_EARLYMODE_LEN3(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr+4, 8, 12, __Value)
+#define SET_EARLYMODE_LEN4(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr+4, 20, 12, __Value)
+
+/* */
+/* defined for TX DESC Operation */
+/* */
+
+#define MAX_TID (15)
+
+/* OFFSET 0 */
+#define OFFSET_SZ 0
+#define OFFSET_SHT 16
+#define BMC BIT(24)
+#define LSG BIT(26)
+#define FSG BIT(27)
+#define OWN BIT(31)
+
+/* OFFSET 4 */
+#define PKT_OFFSET_SZ 0
+#define QSEL_SHT 8
+#define RATE_ID_SHT 16
+#define NAVUSEHDR BIT(20)
+#define SEC_TYPE_SHT 22
+#define PKT_OFFSET_SHT 26
+
+/* OFFSET 8 */
+#define AGG_EN BIT(12)
+#define AGG_BK BIT(16)
+#define AMPDU_DENSITY_SHT 20
+#define ANTSEL_A BIT(24)
+#define ANTSEL_B BIT(25)
+#define TX_ANT_CCK_SHT 26
+#define TX_ANTL_SHT 28
+#define TX_ANT_HT_SHT 30
+
+/* OFFSET 12 */
+#define SEQ_SHT 16
+#define EN_HWSEQ BIT(31)
+
+/* OFFSET 16 */
+#define QOS BIT(6)
+#define HW_SSN BIT(7)
+#define USERATE BIT(8)
+#define DISDATAFB BIT(10)
+#define CTS_2_SELF BIT(11)
+#define RTS_EN BIT(12)
+#define HW_RTS_EN BIT(13)
+#define DATA_SHORT BIT(24)
+#define PWR_STATUS_SHT 15
+#define DATA_SC_SHT 20
+#define DATA_BW BIT(25)
+
+/* OFFSET 20 */
+#define RTY_LMT_EN BIT(17)
+
+enum TXDESC_SC {
+ SC_DONT_CARE = 0x00,
+ SC_UPPER = 0x01,
+ SC_LOWER = 0x02,
+ SC_DUPLICATE = 0x03
+};
+/* OFFSET 20 */
+#define SGI BIT(6)
+#define USB_TXAGG_NUM_SHT 24
+
+#define txdesc_set_ccx_sw_88e(txdesc, value) \
+ do { \
+ ((struct txdesc_88e *)(txdesc))->sw1 = (((value)>>8) & 0x0f); \
+ ((struct txdesc_88e *)(txdesc))->sw0 = ((value) & 0xff); \
+ } while (0)
+
+struct txrpt_ccx_88e {
+ /* offset 0 */
+ u8 tag1:1;
+ u8 pkt_num:3;
+ u8 txdma_underflow:1;
+ u8 int_bt:1;
+ u8 int_tri:1;
+ u8 int_ccx:1;
+
+ /* offset 1 */
+ u8 mac_id:6;
+ u8 pkt_ok:1;
+ u8 bmc:1;
+
+ /* offset 2 */
+ u8 retry_cnt:6;
+ u8 lifetime_over:1;
+ u8 retry_over:1;
+
+ /* offset 3 */
+ u8 ccx_qtime0;
+ u8 ccx_qtime1;
+
+ /* offset 5 */
+ u8 final_data_rate;
+
+ /* offset 6 */
+ u8 sw1:4;
+ u8 qsel:4;
+
+ /* offset 7 */
+ u8 sw0;
+};
+
+#define txrpt_ccx_sw_88e(txrpt_ccx) ((txrpt_ccx)->sw0 + ((txrpt_ccx)->sw1<<8))
+#define txrpt_ccx_qtime_88e(txrpt_ccx) \
+ ((txrpt_ccx)->ccx_qtime0+((txrpt_ccx)->ccx_qtime1<<8))
+
+void rtl8188e_fill_fake_txdesc(struct adapter *padapter, u8 *pDesc,
+ u32 BufferLen, u8 IsPsPoll, u8 IsBTQosNull);
+s32 rtl8188eu_init_xmit_priv(struct adapter *padapter);
+void rtl8188eu_free_xmit_priv(struct adapter *padapter);
+s32 rtl8188eu_hal_xmit(struct adapter *padapter, struct xmit_frame *frame);
+s32 rtl8188eu_mgnt_xmit(struct adapter *padapter, struct xmit_frame *frame);
+s32 rtl8188eu_xmit_buf_handler(struct adapter *padapter);
+#define hal_xmit_handler rtl8188eu_xmit_buf_handler
+void rtl8188eu_xmit_tasklet(void *priv);
+s32 rtl8188eu_xmitframe_complete(struct adapter *padapter,
+ struct xmit_priv *pxmitpriv,
+ struct xmit_buf *pxmitbuf);
+
+void dump_txrpt_ccx_88e(void *buf);
+void handle_txrpt_ccx_88e(struct adapter *adapter, u8 *buf);
+
+void _dbg_dump_tx_info(struct adapter *padapter, int frame_tag,
+ struct tx_desc *ptxdesc);
+
+#endif /* __RTL8188E_XMIT_H__ */
diff --git a/drivers/staging/r8188eu/include/rtw_android.h b/drivers/staging/r8188eu/include/rtw_android.h
new file mode 100644
index 000000000000..e85bf1ff01f8
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_android.h
@@ -0,0 +1,64 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __RTW_ANDROID_H__
+#define __RTW_ANDROID_H__
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+
+enum ANDROID_WIFI_CMD {
+ ANDROID_WIFI_CMD_START,
+ ANDROID_WIFI_CMD_STOP,
+ ANDROID_WIFI_CMD_SCAN_ACTIVE,
+ ANDROID_WIFI_CMD_SCAN_PASSIVE,
+ ANDROID_WIFI_CMD_RSSI,
+ ANDROID_WIFI_CMD_LINKSPEED,
+ ANDROID_WIFI_CMD_RXFILTER_START,
+ ANDROID_WIFI_CMD_RXFILTER_STOP,
+ ANDROID_WIFI_CMD_RXFILTER_ADD,
+ ANDROID_WIFI_CMD_RXFILTER_REMOVE,
+ ANDROID_WIFI_CMD_BTCOEXSCAN_START,
+ ANDROID_WIFI_CMD_BTCOEXSCAN_STOP,
+ ANDROID_WIFI_CMD_BTCOEXMODE,
+ ANDROID_WIFI_CMD_SETSUSPENDOPT,
+ ANDROID_WIFI_CMD_P2P_DEV_ADDR,
+ ANDROID_WIFI_CMD_SETFWPATH,
+ ANDROID_WIFI_CMD_SETBAND,
+ ANDROID_WIFI_CMD_GETBAND,
+ ANDROID_WIFI_CMD_COUNTRY,
+ ANDROID_WIFI_CMD_P2P_SET_NOA,
+ ANDROID_WIFI_CMD_P2P_GET_NOA,
+ ANDROID_WIFI_CMD_P2P_SET_PS,
+ ANDROID_WIFI_CMD_SET_AP_WPS_P2P_IE,
+ ANDROID_WIFI_CMD_MACADDR,
+ ANDROID_WIFI_CMD_BLOCK,
+ ANDROID_WIFI_CMD_WFD_ENABLE,
+ ANDROID_WIFI_CMD_WFD_DISABLE,
+ ANDROID_WIFI_CMD_WFD_SET_TCPPORT,
+ ANDROID_WIFI_CMD_WFD_SET_MAX_TPUT,
+ ANDROID_WIFI_CMD_WFD_SET_DEVTYPE,
+ ANDROID_WIFI_CMD_MAX
+};
+
+int rtw_android_cmdstr_to_num(char *cmdstr);
+int rtw_android_priv_cmd(struct net_device *net, struct ifreq *ifr, int cmd);
+
+#endif /* __RTW_ANDROID_H__ */
diff --git a/drivers/staging/r8188eu/include/rtw_ap.h b/drivers/staging/r8188eu/include/rtw_ap.h
new file mode 100644
index 000000000000..bf3c9fb60153
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ap.h
@@ -0,0 +1,67 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_AP_H_
+#define __RTW_AP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#ifdef CONFIG_88EU_AP_MODE
+
+/* external function */
+void rtw_indicate_sta_assoc_event(struct adapter *padapter,
+ struct sta_info *psta);
+void rtw_indicate_sta_disassoc_event(struct adapter *padapter,
+ struct sta_info *psta);
+void init_mlme_ap_info(struct adapter *padapter);
+void free_mlme_ap_info(struct adapter *padapter);
+void rtw_add_bcn_ie(struct adapter *padapter, struct wlan_bssid_ex *pnetwork,
+ u8 index, u8 *data, u8 len);
+void rtw_remove_bcn_ie(struct adapter *padapter,
+ struct wlan_bssid_ex *pnetwork, u8 index);
+void update_beacon(struct adapter *padapter, u8 ie_id,
+ u8 *oui, u8 tx);
+void add_RATid(struct adapter *padapter, struct sta_info *psta,
+ u8 rssi_level);
+void expire_timeout_chk(struct adapter *padapter);
+void update_sta_info_apmode(struct adapter *padapter, struct sta_info *psta);
+int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len);
+void rtw_ap_restore_network(struct adapter *padapter);
+void rtw_set_macaddr_acl(struct adapter *padapter, int mode);
+int rtw_acl_add_sta(struct adapter *padapter, u8 *addr);
+int rtw_acl_remove_sta(struct adapter *padapter, u8 *addr);
+
+#ifdef CONFIG_88EU_AP_MODE
+void associated_clients_update(struct adapter *padapter, u8 updated);
+void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta);
+u8 bss_cap_update_on_sta_leave(struct adapter *padapter, struct sta_info *psta);
+void sta_info_update(struct adapter *padapter, struct sta_info *psta);
+void ap_sta_info_defer_update(struct adapter *padapter, struct sta_info *psta);
+u8 ap_free_sta(struct adapter *padapter, struct sta_info *psta,
+ bool active, u16 reason);
+int rtw_sta_flush(struct adapter *padapter);
+int rtw_ap_inform_ch_switch(struct adapter *padapter, u8 new_ch, u8 ch_offset);
+void start_ap_mode(struct adapter *padapter);
+void stop_ap_mode(struct adapter *padapter);
+#endif
+#endif /* end of CONFIG_88EU_AP_MODE */
+void update_bmc_sta(struct adapter *padapter);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_br_ext.h b/drivers/staging/r8188eu/include/rtw_br_ext.h
new file mode 100644
index 000000000000..f21e7a4515d0
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_br_ext.h
@@ -0,0 +1,66 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_BR_EXT_H_
+#define _RTW_BR_EXT_H_
+
+#define MACADDRLEN 6
+#define _DEBUG_ERR DBG_88E
+#define _DEBUG_INFO DBG_88E
+#define DEBUG_WARN DBG_88E
+#define DEBUG_INFO DBG_88E
+#define DEBUG_ERR DBG_88E
+#define GET_MY_HWADDR(padapter) ((padapter)->eeprompriv.mac_addr)
+
+#define NAT25_HASH_BITS 4
+#define NAT25_HASH_SIZE (1 << NAT25_HASH_BITS)
+#define NAT25_AGEING_TIME 300
+
+#define MAX_NETWORK_ADDR_LEN 17
+
+struct nat25_network_db_entry {
+ struct nat25_network_db_entry *next_hash;
+ struct nat25_network_db_entry **pprev_hash;
+ atomic_t use_count;
+ unsigned char macAddr[6];
+ unsigned long ageing_timer;
+ unsigned char networkAddr[MAX_NETWORK_ADDR_LEN];
+};
+
+enum NAT25_METHOD {
+ NAT25_MIN,
+ NAT25_CHECK,
+ NAT25_INSERT,
+ NAT25_LOOKUP,
+ NAT25_PARSE,
+ NAT25_MAX
+};
+
+struct br_ext_info {
+ unsigned int nat25_disable;
+ unsigned int macclone_enable;
+ unsigned int dhcp_bcst_disable;
+ int addPPPoETag; /* 1: Add PPPoE relay-SID, 0: disable */
+ unsigned char nat25_dmzMac[MACADDRLEN];
+ unsigned int nat25sc_disable;
+};
+
+void nat25_db_cleanup(struct adapter *priv);
+
+#endif /* _RTW_BR_EXT_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
new file mode 100644
index 000000000000..357e732ac046
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_cmd.h
@@ -0,0 +1,991 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_CMD_H_
+#define __RTW_CMD_H_
+
+#include <wlan_bssdef.h>
+#include <rtw_rf.h>
+#include <rtw_led.h>
+
+#define C2H_MEM_SZ (16*1024)
+
+#include <osdep_service.h>
+#include <ieee80211.h> /* <ieee80211/ieee80211.h> */
+
+#define FREE_CMDOBJ_SZ 128
+
+#define MAX_CMDSZ 1024
+#define MAX_RSPSZ 512
+#define MAX_EVTSZ 1024
+
+#define CMDBUFF_ALIGN_SZ 512
+
+struct cmd_obj {
+ struct adapter *padapter;
+ u16 cmdcode;
+ u8 res;
+ u8 *parmbuf;
+ u32 cmdsz;
+ u8 *rsp;
+ u32 rspsz;
+ struct list_head list;
+};
+
+struct cmd_priv {
+ struct semaphore cmd_queue_sema;
+ struct semaphore terminate_cmdthread_sema;
+ struct __queue cmd_queue;
+ u8 cmd_seq;
+ u8 *cmd_buf; /* shall be non-paged, and 4 bytes aligned */
+ u8 *cmd_allocated_buf;
+ u8 *rsp_buf; /* shall be non-paged, and 4 bytes aligned */
+ u8 *rsp_allocated_buf;
+ u32 cmd_issued_cnt;
+ u32 cmd_done_cnt;
+ u32 rsp_cnt;
+ u8 cmdthd_running;
+ struct adapter *padapter;
+};
+
+struct evt_priv {
+ struct work_struct c2h_wk;
+ bool c2h_wk_alive;
+ struct rtw_cbuf *c2h_queue;
+ #define C2H_QUEUE_MAX_LEN 10
+ ATOMIC_T event_seq;
+ u8 *evt_buf; /* shall be non-paged, and 4 bytes aligned */
+ u8 *evt_allocated_buf;
+ u32 evt_done_cnt;
+};
+
+#define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \
+do {\
+ INIT_LIST_HEAD(&pcmd->list);\
+ pcmd->cmdcode = code;\
+ pcmd->parmbuf = (u8 *)(pparm);\
+ pcmd->cmdsz = sizeof(*pparm);\
+ pcmd->rsp = NULL;\
+ pcmd->rspsz = 0;\
+} while (0)
+
+struct c2h_evt_hdr {
+ u8 id:4;
+ u8 plen:4;
+ u8 seq;
+ u8 payload[0];
+};
+
+#define c2h_evt_exist(c2h_evt) ((c2h_evt)->id || (c2h_evt)->plen)
+
+u32 rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
+struct cmd_obj *rtw_dequeue_cmd(struct cmd_priv *pcmdpriv);
+void rtw_free_cmd_obj(struct cmd_obj *pcmd);
+
+int rtw_cmd_thread(void *context);
+
+u32 rtw_init_cmd_priv(struct cmd_priv *pcmdpriv);
+void rtw_free_cmd_priv(struct cmd_priv *pcmdpriv);
+
+u32 rtw_init_evt_priv(struct evt_priv *pevtpriv);
+void rtw_free_evt_priv(struct evt_priv *pevtpriv);
+void rtw_cmd_clr_isr(struct cmd_priv *pcmdpriv);
+void rtw_evt_notify_isr(struct evt_priv *pevtpriv);
+#ifdef CONFIG_88EU_P2P
+u8 p2p_protocol_wk_cmd(struct adapter *padapter, int intCmdType);
+#endif /* CONFIG_88EU_P2P */
+
+enum rtw_drvextra_cmd_id {
+ NONE_WK_CID,
+ DYNAMIC_CHK_WK_CID,
+ DM_CTRL_WK_CID,
+ PBC_POLLING_WK_CID,
+ POWER_SAVING_CTRL_WK_CID,/* IPS,AUTOSuspend */
+ LPS_CTRL_WK_CID,
+ ANT_SELECT_WK_CID,
+ P2P_PS_WK_CID,
+ P2P_PROTO_WK_CID,
+ CHECK_HIQ_WK_CID,/* for softap mode, check hi queue if empty */
+ INTEl_WIDI_WK_CID,
+ C2H_WK_CID,
+ RTP_TIMER_CFG_WK_CID,
+ MAX_WK_CID
+};
+
+enum LPS_CTRL_TYPE {
+ LPS_CTRL_SCAN = 0,
+ LPS_CTRL_JOINBSS = 1,
+ LPS_CTRL_CONNECT = 2,
+ LPS_CTRL_DISCONNECT = 3,
+ LPS_CTRL_SPECIAL_PACKET = 4,
+ LPS_CTRL_LEAVE = 5,
+};
+
+enum RFINTFS {
+ SWSI,
+ HWSI,
+ HWPI,
+};
+
+/*
+Caller Mode: Infra, Ad-HoC(C)
+
+Notes: To enter USB suspend mode
+
+Command Mode
+
+*/
+struct usb_suspend_parm {
+ u32 action;/* 1: sleep, 0:resume */
+};
+
+/*
+Caller Mode: Infra, Ad-HoC
+
+Notes: To join a known BSS.
+
+Command-Event Mode
+
+*/
+
+/*
+Caller Mode: Infra, Ad-Hoc
+
+Notes: To join the specified bss
+
+Command Event Mode
+
+*/
+struct joinbss_parm {
+ struct wlan_bssid_ex network;
+};
+
+/*
+Caller Mode: Infra, Ad-HoC(C)
+
+Notes: To disconnect the current associated BSS
+
+Command Mode
+
+*/
+struct disconnect_parm {
+ u32 deauth_timeout_ms;
+};
+
+/*
+Caller Mode: AP, Ad-HoC(M)
+
+Notes: To create a BSS
+
+Command Mode
+*/
+struct createbss_parm {
+ struct wlan_bssid_ex network;
+};
+
+struct setopmode_parm {
+ u8 mode;
+ u8 rsvd[3];
+};
+
+/*
+Caller Mode: AP, Ad-HoC, Infra
+
+Notes: To ask RTL8711 performing site-survey
+
+Command-Event Mode
+
+*/
+
+#define RTW_SSID_SCAN_AMOUNT 9 /* for WEXT_CSCAN_AMOUNT 9 */
+#define RTW_CHANNEL_SCAN_AMOUNT (14+37)
+struct sitesurvey_parm {
+ int scan_mode; /* active: 1, passive: 0 */
+ u8 ssid_num;
+ u8 ch_num;
+ struct ndis_802_11_ssid ssid[RTW_SSID_SCAN_AMOUNT];
+ struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To set the auth type of RTL8711. open/shared/802.1x
+
+Command Mode
+
+*/
+struct setauth_parm {
+ u8 mode; /* 0: legacy open, 1: legacy shared 2: 802.1x */
+ u8 _1x; /* 0: PSK, 1: TLS */
+ u8 rsvd[2];
+};
+
+/*
+Caller Mode: Infra
+
+a. algorithm: wep40, wep104, tkip & aes
+b. keytype: grp key/unicast key
+c. key contents
+
+when shared key ==> keyid is the camid
+when 802.1x ==> keyid [0:1] ==> grp key
+when 802.1x ==> keyid > 2 ==> unicast key
+
+*/
+struct setkey_parm {
+ u8 algorithm; /* could be none, wep40, TKIP, CCMP, wep104 */
+ u8 keyid;
+ u8 grpkey; /* 1: this is the grpkey for 802.1x.
+ * 0: this is the unicast key for 802.1x */
+ u8 set_tx; /* 1: main tx key for wep. 0: other key. */
+ u8 key[16]; /* this could be 40 or 104 */
+};
+
+/*
+When in AP or Ad-Hoc mode, this is used to
+allocate an sw/hw entry for a newly associated sta.
+
+Command
+
+when shared key ==> algorithm/keyid
+
+*/
+struct set_stakey_parm {
+ u8 addr[ETH_ALEN];
+ u8 algorithm;
+ u8 id;/* currently for erasing cam entry if
+ * algorithm == _NO_PRIVACY_ */
+ u8 key[16];
+};
+
+struct set_stakey_rsp {
+ u8 addr[ETH_ALEN];
+ u8 keyid;
+ u8 rsvd;
+};
+
+/*
+Caller Ad-Hoc/AP
+
+Command -Rsp(AID == CAMID) mode
+
+This is to force fw to add an sta_data entry per driver's request.
+
+FW will write an cam entry associated with it.
+
+*/
+struct set_assocsta_parm {
+ u8 addr[ETH_ALEN];
+};
+
+struct set_assocsta_rsp {
+ u8 cam_id;
+ u8 rsvd[3];
+};
+
+/*
+ Caller Ad-Hoc/AP
+
+ Command mode
+
+ This is to force fw to del an sta_data entry per driver's request
+
+ FW will invalidate the cam entry associated with it.
+
+*/
+struct del_assocsta_parm {
+ u8 addr[ETH_ALEN];
+};
+
+/*
+Caller Mode: AP/Ad-HoC(M)
+
+Notes: To notify fw that given staid has changed its power state
+
+Command Mode
+
+*/
+struct setstapwrstate_parm {
+ u8 staid;
+ u8 status;
+ u8 hwaddr[6];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To setup the basic rate of RTL8711
+
+Command Mode
+
+*/
+struct setbasicrate_parm {
+ u8 basicrates[NumRates];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To read the current basic rate
+
+Command-Rsp Mode
+
+*/
+struct getbasicrate_parm {
+ u32 rsvd;
+};
+
+struct getbasicrate_rsp {
+ u8 basicrates[NumRates];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To setup the data rate of RTL8711
+
+Command Mode
+
+*/
+struct setdatarate_parm {
+ u8 mac_id;
+ u8 datarates[NumRates];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To read the current data rate
+
+Command-Rsp Mode
+
+*/
+struct getdatarate_parm {
+ u32 rsvd;
+
+};
+struct getdatarate_rsp {
+ u8 datarates[NumRates];
+};
+
+/*
+Caller Mode: Any
+AP: AP can use the info for the contents of beacon frame
+Infra: STA can use the info when sitesurveying
+Ad-HoC(M): Like AP
+Ad-HoC(C): Like STA
+
+Notes: To set the phy capability of the NIC
+
+Command Mode
+
+*/
+
+struct setphyinfo_parm {
+ struct regulatory_class class_sets[NUM_REGULATORYS];
+ u8 status;
+};
+
+struct getphyinfo_parm {
+ u32 rsvd;
+};
+
+struct getphyinfo_rsp {
+ struct regulatory_class class_sets[NUM_REGULATORYS];
+ u8 status;
+};
+
+/*
+Caller Mode: Any
+
+Notes: To set the channel/modem/band
+This command will be used when channel/modem/band is changed.
+
+Command Mode
+
+*/
+struct setphy_parm {
+ u8 rfchannel;
+ u8 modem;
+};
+
+/*
+Caller Mode: Any
+
+Notes: To get the current setting of channel/modem/band
+
+Command-Rsp Mode
+
+*/
+struct getphy_parm {
+ u32 rsvd;
+
+};
+struct getphy_rsp {
+ u8 rfchannel;
+ u8 modem;
+};
+
+struct readBB_parm {
+ u8 offset;
+};
+struct readBB_rsp {
+ u8 value;
+};
+
+struct readTSSI_parm {
+ u8 offset;
+};
+struct readTSSI_rsp {
+ u8 value;
+};
+
+struct writeBB_parm {
+ u8 offset;
+ u8 value;
+};
+
+struct readRF_parm {
+ u8 offset;
+};
+struct readRF_rsp {
+ u32 value;
+};
+
+struct writeRF_parm {
+ u32 offset;
+ u32 value;
+};
+
+struct getrfintfs_parm {
+ u8 rfintfs;
+};
+
+struct Tx_Beacon_param
+{
+ struct wlan_bssid_ex network;
+};
+
+/*
+ Notes: This command is used for H2C/C2H loopback testing
+
+ mac[0] == 0
+ ==> CMD mode, return H2C_SUCCESS.
+ The following condition must be ture under CMD mode
+ mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
+ s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
+ s2 == (b1 << 8 | b0);
+
+ mac[0] == 1
+ ==> CMD_RSP mode, return H2C_SUCCESS_RSP
+
+ The rsp layout shall be:
+ rsp: parm:
+ mac[0] = mac[5];
+ mac[1] = mac[4];
+ mac[2] = mac[3];
+ mac[3] = mac[2];
+ mac[4] = mac[1];
+ mac[5] = mac[0];
+ s0 = s1;
+ s1 = swap16(s0);
+ w0 = swap32(w1);
+ b0 = b1
+ s2 = s0 + s1
+ b1 = b0
+ w1 = w0
+
+ mac[0] == 2
+ ==> CMD_EVENT mode, return H2C_SUCCESS
+ The event layout shall be:
+ event: parm:
+ mac[0] = mac[5];
+ mac[1] = mac[4];
+ mac[2] = event's seq no, starting from 1 to parm's marc[3]
+ mac[3] = mac[2];
+ mac[4] = mac[1];
+ mac[5] = mac[0];
+ s0 = swap16(s0) - event.mac[2];
+ s1 = s1 + event.mac[2];
+ w0 = swap32(w0);
+ b0 = b1
+ s2 = s0 + event.mac[2]
+ b1 = b0
+ w1 = swap32(w1) - event.mac[2];
+
+ parm->mac[3] is the total event counts that host requested.
+ event will be the same with the cmd's param.
+*/
+
+/* CMD param Format for driver extra cmd handler */
+struct drvextra_cmd_parm {
+ int ec_id; /* extra cmd id */
+ int type_size; /* Can use this field as the type id or command size */
+ unsigned char *pbuf;
+};
+
+/*------------------- Below are used for RF/BB tunning ---------------------*/
+
+struct setantenna_parm {
+ u8 tx_antset;
+ u8 rx_antset;
+ u8 tx_antenna;
+ u8 rx_antenna;
+};
+
+struct enrateadaptive_parm {
+ u32 en;
+};
+
+struct settxagctbl_parm {
+ u32 txagc[MAX_RATES_LENGTH];
+};
+
+struct gettxagctbl_parm {
+ u32 rsvd;
+};
+struct gettxagctbl_rsp {
+ u32 txagc[MAX_RATES_LENGTH];
+};
+
+struct setagcctrl_parm {
+ u32 agcctrl; /* 0: pure hw, 1: fw */
+};
+
+struct setssup_parm {
+ u32 ss_ForceUp[MAX_RATES_LENGTH];
+};
+
+struct getssup_parm {
+ u32 rsvd;
+};
+
+struct getssup_rsp {
+ u8 ss_ForceUp[MAX_RATES_LENGTH];
+};
+
+struct setssdlevel_parm {
+ u8 ss_DLevel[MAX_RATES_LENGTH];
+};
+
+struct getssdlevel_parm {
+ u32 rsvd;
+};
+
+struct getssdlevel_rsp {
+ u8 ss_DLevel[MAX_RATES_LENGTH];
+};
+
+struct setssulevel_parm {
+ u8 ss_ULevel[MAX_RATES_LENGTH];
+};
+
+struct getssulevel_parm {
+ u32 rsvd;
+};
+
+struct getssulevel_rsp {
+ u8 ss_ULevel[MAX_RATES_LENGTH];
+};
+
+struct setcountjudge_parm {
+ u8 count_judge[MAX_RATES_LENGTH];
+};
+
+struct getcountjudge_parm {
+ u32 rsvd;
+};
+
+struct getcountjudge_rsp {
+ u8 count_judge[MAX_RATES_LENGTH];
+};
+
+struct setratable_parm {
+ u8 ss_ForceUp[NumRates];
+ u8 ss_ULevel[NumRates];
+ u8 ss_DLevel[NumRates];
+ u8 count_judge[NumRates];
+};
+
+struct getratable_parm {
+ uint rsvd;
+};
+
+struct getratable_rsp {
+ u8 ss_ForceUp[NumRates];
+ u8 ss_ULevel[NumRates];
+ u8 ss_DLevel[NumRates];
+ u8 count_judge[NumRates];
+};
+
+/* to get TX,RX retry count */
+
+struct gettxretrycnt_parm {
+ unsigned int rsvd;
+};
+
+struct gettxretrycnt_rsp {
+ unsigned long tx_retrycnt;
+};
+
+struct getrxretrycnt_parm {
+ unsigned int rsvd;
+};
+
+struct getrxretrycnt_rsp {
+ unsigned long rx_retrycnt;
+};
+
+/* to get BCNOK,BCNERR count */
+struct getbcnokcnt_parm {
+ unsigned int rsvd;
+};
+
+struct getbcnokcnt_rsp {
+ unsigned long bcnokcnt;
+};
+
+struct getbcnerrcnt_parm {
+ unsigned int rsvd;
+};
+
+struct getbcnerrcnt_rsp {
+ unsigned long bcnerrcnt;
+};
+
+/* to get current TX power level */
+struct getcurtxpwrlevel_parm {
+ unsigned int rsvd;
+};
+struct getcurtxpwrlevel_rspi {
+ unsigned short tx_power;
+};
+
+struct setprobereqextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct setassocreqextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct setproberspextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct setassocrspextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct addBaReq_parm {
+ unsigned int tid;
+ u8 addr[ETH_ALEN];
+};
+
+/*H2C Handler index: 46 */
+struct set_ch_parm {
+ u8 ch;
+ u8 bw;
+ u8 ch_offset;
+};
+
+/*H2C Handler index: 59 */
+struct SetChannelPlan_param
+{
+ u8 channel_plan;
+};
+
+/*H2C Handler index: 60 */
+struct LedBlink_param
+{
+ struct LED_871x *pLed;
+};
+
+/*H2C Handler index: 61 */
+struct SetChannelSwitch_param
+{
+ u8 new_ch_no;
+};
+
+/*H2C Handler index: 62 */
+struct TDLSoption_param
+{
+ u8 addr[ETH_ALEN];
+ u8 option;
+};
+
+#define GEN_CMD_CODE(cmd) cmd ## _CMD_
+
+/*
+
+Result:
+0x00: success
+0x01: success, and check Response.
+0x02: cmd ignored due to duplicated sequcne number
+0x03: cmd dropped due to invalid cmd code
+0x04: reserved.
+
+*/
+
+#define H2C_RSP_OFFSET 512
+
+#define H2C_SUCCESS 0x00
+#define H2C_SUCCESS_RSP 0x01
+#define H2C_DUPLICATED 0x02
+#define H2C_DROPPED 0x03
+#define H2C_PARAMETERS_ERROR 0x04
+#define H2C_REJECTED 0x05
+#define H2C_CMD_OVERFLOW 0x06
+#define H2C_RESERVED 0x07
+
+u8 rtw_setassocsta_cmd(struct adapter *padapter, u8 *mac_addr);
+u8 rtw_setstandby_cmd(struct adapter *padapter, uint action);
+u8 rtw_sitesurvey_cmd(struct adapter *padapter, struct ndis_802_11_ssid *ssid,
+ int ssid_num, struct rtw_ieee80211_channel *ch,
+ int ch_num);
+u8 rtw_createbss_cmd(struct adapter *padapter);
+u8 rtw_createbss_cmd_ex(struct adapter *padapter, unsigned char *pbss,
+ unsigned int sz);
+u8 rtw_setphy_cmd(struct adapter *padapter, u8 modem, u8 ch);
+u8 rtw_setstakey_cmd(struct adapter *padapter, u8 *psta, u8 unicast_key);
+u8 rtw_clearstakey_cmd(struct adapter *padapter, u8 *psta, u8 entry, u8 enqueue);
+u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network* pnetwork);
+u8 rtw_disassoc_cmd(struct adapter *padapter, u32 deauth_timeout_ms, bool enqueue);
+u8 rtw_setopmode_cmd(struct adapter *padapter, enum ndis_802_11_network_infra networktype);
+u8 rtw_setdatarate_cmd(struct adapter *padapter, u8 *rateset);
+u8 rtw_setbasicrate_cmd(struct adapter *padapter, u8 *rateset);
+u8 rtw_setbbreg_cmd(struct adapter * padapter, u8 offset, u8 val);
+u8 rtw_setrfreg_cmd(struct adapter * padapter, u8 offset, u32 val);
+u8 rtw_getbbreg_cmd(struct adapter * padapter, u8 offset, u8 * pval);
+u8 rtw_getrfreg_cmd(struct adapter * padapter, u8 offset, u8 * pval);
+u8 rtw_setrfintfs_cmd(struct adapter *padapter, u8 mode);
+u8 rtw_setrttbl_cmd(struct adapter *padapter, struct setratable_parm *prate_table);
+u8 rtw_getrttbl_cmd(struct adapter *padapter, struct getratable_rsp *pval);
+
+u8 rtw_gettssi_cmd(struct adapter *padapter, u8 offset,u8 *pval);
+u8 rtw_setfwdig_cmd(struct adapter*padapter, u8 type);
+u8 rtw_setfwra_cmd(struct adapter*padapter, u8 type);
+
+u8 rtw_addbareq_cmd(struct adapter*padapter, u8 tid, u8 *addr);
+
+u8 rtw_dynamic_chk_wk_cmd(struct adapter *adapter);
+
+u8 rtw_lps_ctrl_wk_cmd(struct adapter*padapter, u8 lps_ctrl_type, u8 enqueue);
+u8 rtw_rpt_timer_cfg_cmd(struct adapter*padapter, u16 minRptTime);
+
+ u8 rtw_antenna_select_cmd(struct adapter*padapter, u8 antenna,u8 enqueue);
+u8 rtw_ps_cmd(struct adapter*padapter);
+
+#ifdef CONFIG_88EU_AP_MODE
+u8 rtw_chk_hi_queue_cmd(struct adapter*padapter);
+#endif
+
+u8 rtw_set_ch_cmd(struct adapter*padapter, u8 ch, u8 bw, u8 ch_offset, u8 enqueue);
+u8 rtw_set_chplan_cmd(struct adapter*padapter, u8 chplan, u8 enqueue);
+u8 rtw_led_blink_cmd(struct adapter*padapter, struct LED_871x * pLed);
+u8 rtw_set_csa_cmd(struct adapter*padapter, u8 new_ch_no);
+u8 rtw_tdls_cmd(struct adapter *padapter, u8 *addr, u8 option);
+
+u8 rtw_c2h_wk_cmd(struct adapter *padapter, u8 *c2h_evt);
+
+u8 rtw_drvextra_cmd_hdl(struct adapter *padapter, unsigned char *pbuf);
+
+void rtw_survey_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd);
+void rtw_disassoc_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd);
+void rtw_joinbss_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd);
+void rtw_createbss_cmd_callback(struct adapter *adapt, struct cmd_obj *pcmd);
+void rtw_getbbrfreg_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd);
+void rtw_readtssi_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd);
+
+void rtw_setstaKey_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd);
+void rtw_setassocsta_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cm);
+void rtw_getrttbl_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd);
+
+struct _cmd_callback {
+ u32 cmd_code;
+ void (*callback)(struct adapter *padapter, struct cmd_obj *cmd);
+};
+
+enum rtw_h2c_cmd {
+ GEN_CMD_CODE(_Read_MACREG), /*0*/
+ GEN_CMD_CODE(_Write_MACREG),
+ GEN_CMD_CODE(_Read_BBREG),
+ GEN_CMD_CODE(_Write_BBREG),
+ GEN_CMD_CODE(_Read_RFREG),
+ GEN_CMD_CODE(_Write_RFREG), /*5*/
+ GEN_CMD_CODE(_Read_EEPROM),
+ GEN_CMD_CODE(_Write_EEPROM),
+ GEN_CMD_CODE(_Read_EFUSE),
+ GEN_CMD_CODE(_Write_EFUSE),
+
+ GEN_CMD_CODE(_Read_CAM), /*10*/
+ GEN_CMD_CODE(_Write_CAM),
+ GEN_CMD_CODE(_setBCNITV),
+ GEN_CMD_CODE(_setMBIDCFG),
+ GEN_CMD_CODE(_JoinBss), /*14*/
+ GEN_CMD_CODE(_DisConnect), /*15*/
+ GEN_CMD_CODE(_CreateBss),
+ GEN_CMD_CODE(_SetOpMode),
+ GEN_CMD_CODE(_SiteSurvey), /*18*/
+ GEN_CMD_CODE(_SetAuth),
+
+ GEN_CMD_CODE(_SetKey), /*20*/
+ GEN_CMD_CODE(_SetStaKey),
+ GEN_CMD_CODE(_SetAssocSta),
+ GEN_CMD_CODE(_DelAssocSta),
+ GEN_CMD_CODE(_SetStaPwrState),
+ GEN_CMD_CODE(_SetBasicRate), /*25*/
+ GEN_CMD_CODE(_GetBasicRate),
+ GEN_CMD_CODE(_SetDataRate),
+ GEN_CMD_CODE(_GetDataRate),
+ GEN_CMD_CODE(_SetPhyInfo),
+
+ GEN_CMD_CODE(_GetPhyInfo), /*30*/
+ GEN_CMD_CODE(_SetPhy),
+ GEN_CMD_CODE(_GetPhy),
+ GEN_CMD_CODE(_readRssi),
+ GEN_CMD_CODE(_readGain),
+ GEN_CMD_CODE(_SetAtim), /*35*/
+ GEN_CMD_CODE(_SetPwrMode),
+ GEN_CMD_CODE(_JoinbssRpt),
+ GEN_CMD_CODE(_SetRaTable),
+ GEN_CMD_CODE(_GetRaTable),
+
+ GEN_CMD_CODE(_GetCCXReport), /*40*/
+ GEN_CMD_CODE(_GetDTMReport),
+ GEN_CMD_CODE(_GetTXRateStatistics),
+ GEN_CMD_CODE(_SetUsbSuspend),
+ GEN_CMD_CODE(_SetH2cLbk),
+ GEN_CMD_CODE(_AddBAReq), /*45*/
+ GEN_CMD_CODE(_SetChannel), /*46*/
+ GEN_CMD_CODE(_SetTxPower),
+ GEN_CMD_CODE(_SwitchAntenna),
+ GEN_CMD_CODE(_SetCrystalCap),
+ GEN_CMD_CODE(_SetSingleCarrierTx), /*50*/
+
+ GEN_CMD_CODE(_SetSingleToneTx),/*51*/
+ GEN_CMD_CODE(_SetCarrierSuppressionTx),
+ GEN_CMD_CODE(_SetContinuousTx),
+ GEN_CMD_CODE(_SwitchBandwidth), /*54*/
+ GEN_CMD_CODE(_TX_Beacon), /*55*/
+
+ GEN_CMD_CODE(_Set_MLME_EVT), /*56*/
+ GEN_CMD_CODE(_Set_Drv_Extra), /*57*/
+ GEN_CMD_CODE(_Set_H2C_MSG), /*58*/
+
+ GEN_CMD_CODE(_SetChannelPlan), /*59*/
+ GEN_CMD_CODE(_LedBlink), /*60*/
+
+ GEN_CMD_CODE(_SetChannelSwitch), /*61*/
+ GEN_CMD_CODE(_TDLS), /*62*/
+
+ MAX_H2CCMD
+};
+
+#define _GetBBReg_CMD_ _Read_BBREG_CMD_
+#define _SetBBReg_CMD_ _Write_BBREG_CMD_
+#define _GetRFReg_CMD_ _Read_RFREG_CMD_
+#define _SetRFReg_CMD_ _Write_RFREG_CMD_
+
+#ifdef _RTW_CMD_C_
+static struct _cmd_callback rtw_cmd_callback[] =
+{
+ {GEN_CMD_CODE(_Read_MACREG), NULL}, /*0*/
+ {GEN_CMD_CODE(_Write_MACREG), NULL},
+ {GEN_CMD_CODE(_Read_BBREG), &rtw_getbbrfreg_cmdrsp_callback},
+ {GEN_CMD_CODE(_Write_BBREG), NULL},
+ {GEN_CMD_CODE(_Read_RFREG), &rtw_getbbrfreg_cmdrsp_callback},
+ {GEN_CMD_CODE(_Write_RFREG), NULL}, /*5*/
+ {GEN_CMD_CODE(_Read_EEPROM), NULL},
+ {GEN_CMD_CODE(_Write_EEPROM), NULL},
+ {GEN_CMD_CODE(_Read_EFUSE), NULL},
+ {GEN_CMD_CODE(_Write_EFUSE), NULL},
+
+ {GEN_CMD_CODE(_Read_CAM), NULL}, /*10*/
+ {GEN_CMD_CODE(_Write_CAM), NULL},
+ {GEN_CMD_CODE(_setBCNITV), NULL},
+ {GEN_CMD_CODE(_setMBIDCFG), NULL},
+ {GEN_CMD_CODE(_JoinBss), &rtw_joinbss_cmd_callback}, /*14*/
+ {GEN_CMD_CODE(_DisConnect), &rtw_disassoc_cmd_callback}, /*15*/
+ {GEN_CMD_CODE(_CreateBss), &rtw_createbss_cmd_callback},
+ {GEN_CMD_CODE(_SetOpMode), NULL},
+ {GEN_CMD_CODE(_SiteSurvey), &rtw_survey_cmd_callback}, /*18*/
+ {GEN_CMD_CODE(_SetAuth), NULL},
+
+ {GEN_CMD_CODE(_SetKey), NULL}, /*20*/
+ {GEN_CMD_CODE(_SetStaKey), &rtw_setstaKey_cmdrsp_callback},
+ {GEN_CMD_CODE(_SetAssocSta), &rtw_setassocsta_cmdrsp_callback},
+ {GEN_CMD_CODE(_DelAssocSta), NULL},
+ {GEN_CMD_CODE(_SetStaPwrState), NULL},
+ {GEN_CMD_CODE(_SetBasicRate), NULL}, /*25*/
+ {GEN_CMD_CODE(_GetBasicRate), NULL},
+ {GEN_CMD_CODE(_SetDataRate), NULL},
+ {GEN_CMD_CODE(_GetDataRate), NULL},
+ {GEN_CMD_CODE(_SetPhyInfo), NULL},
+
+ {GEN_CMD_CODE(_GetPhyInfo), NULL}, /*30*/
+ {GEN_CMD_CODE(_SetPhy), NULL},
+ {GEN_CMD_CODE(_GetPhy), NULL},
+ {GEN_CMD_CODE(_readRssi), NULL},
+ {GEN_CMD_CODE(_readGain), NULL},
+ {GEN_CMD_CODE(_SetAtim), NULL}, /*35*/
+ {GEN_CMD_CODE(_SetPwrMode), NULL},
+ {GEN_CMD_CODE(_JoinbssRpt), NULL},
+ {GEN_CMD_CODE(_SetRaTable), NULL},
+ {GEN_CMD_CODE(_GetRaTable), NULL},
+
+ {GEN_CMD_CODE(_GetCCXReport), NULL}, /*40*/
+ {GEN_CMD_CODE(_GetDTMReport), NULL},
+ {GEN_CMD_CODE(_GetTXRateStatistics), NULL},
+ {GEN_CMD_CODE(_SetUsbSuspend), NULL},
+ {GEN_CMD_CODE(_SetH2cLbk), NULL},
+ {GEN_CMD_CODE(_AddBAReq), NULL}, /*45*/
+ {GEN_CMD_CODE(_SetChannel), NULL}, /*46*/
+ {GEN_CMD_CODE(_SetTxPower), NULL},
+ {GEN_CMD_CODE(_SwitchAntenna), NULL},
+ {GEN_CMD_CODE(_SetCrystalCap), NULL},
+ {GEN_CMD_CODE(_SetSingleCarrierTx), NULL}, /*50*/
+
+ {GEN_CMD_CODE(_SetSingleToneTx), NULL}, /*51*/
+ {GEN_CMD_CODE(_SetCarrierSuppressionTx), NULL},
+ {GEN_CMD_CODE(_SetContinuousTx), NULL},
+ {GEN_CMD_CODE(_SwitchBandwidth), NULL}, /*54*/
+ {GEN_CMD_CODE(_TX_Beacon), NULL},/*55*/
+
+ {GEN_CMD_CODE(_Set_MLME_EVT), NULL},/*56*/
+ {GEN_CMD_CODE(_Set_Drv_Extra), NULL},/*57*/
+ {GEN_CMD_CODE(_Set_H2C_MSG), NULL},/*58*/
+ {GEN_CMD_CODE(_SetChannelPlan), NULL},/*59*/
+ {GEN_CMD_CODE(_LedBlink), NULL},/*60*/
+
+ {GEN_CMD_CODE(_SetChannelSwitch), NULL},/*61*/
+ {GEN_CMD_CODE(_TDLS), NULL},/*62*/
+};
+#endif
+
+#endif /* _CMD_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_debug.h b/drivers/staging/r8188eu/include/rtw_debug.h
new file mode 100644
index 000000000000..d94639a8dc63
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_debug.h
@@ -0,0 +1,274 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_DEBUG_H__
+#define __RTW_DEBUG_H__
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define _drv_always_ 1
+#define _drv_emerg_ 2
+#define _drv_alert_ 3
+#define _drv_crit_ 4
+#define _drv_err_ 5
+#define _drv_warning_ 6
+#define _drv_notice_ 7
+#define _drv_info_ 8
+#define _drv_debug_ 9
+
+#define _module_rtl871x_xmit_c_ BIT(0)
+#define _module_xmit_osdep_c_ BIT(1)
+#define _module_rtl871x_recv_c_ BIT(2)
+#define _module_recv_osdep_c_ BIT(3)
+#define _module_rtl871x_mlme_c_ BIT(4)
+#define _module_mlme_osdep_c_ BIT(5)
+#define _module_rtl871x_sta_mgt_c_ BIT(6)
+#define _module_rtl871x_cmd_c_ BIT(7)
+#define _module_cmd_osdep_c_ BIT(8)
+#define _module_rtl871x_io_c_ BIT(9)
+#define _module_io_osdep_c_ BIT(10)
+#define _module_os_intfs_c_ BIT(11)
+#define _module_rtl871x_security_c_ BIT(12)
+#define _module_rtl871x_eeprom_c_ BIT(13)
+#define _module_hal_init_c_ BIT(14)
+#define _module_hci_hal_init_c_ BIT(15)
+#define _module_rtl871x_ioctl_c_ BIT(16)
+#define _module_rtl871x_ioctl_set_c_ BIT(17)
+#define _module_rtl871x_ioctl_query_c_ BIT(18)
+#define _module_rtl871x_pwrctrl_c_ BIT(19)
+#define _module_hci_intfs_c_ BIT(20)
+#define _module_hci_ops_c_ BIT(21)
+#define _module_osdep_service_c_ BIT(22)
+#define _module_mp_ BIT(23)
+#define _module_hci_ops_os_c_ BIT(24)
+#define _module_rtl871x_ioctl_os_c BIT(25)
+#define _module_rtl8712_cmd_c_ BIT(26)
+#define _module_rtl8192c_xmit_c_ BIT(27)
+#define _module_hal_xmit_c_ BIT(28)
+#define _module_efuse_ BIT(29)
+#define _module_rtl8712_recv_c_ BIT(30)
+#define _module_rtl8712_led_c_ BIT(31)
+
+#define DRIVER_PREFIX "R8188EU: "
+
+extern u32 GlobalDebugLevel;
+
+#define DBG_88E_LEVEL(_level, fmt, arg...) \
+ do { \
+ if (_level <= GlobalDebugLevel) \
+ pr_info(DRIVER_PREFIX"INFO " fmt, ##arg); \
+ } while (0)
+
+#define DBG_88E(...) \
+ do { \
+ if (_drv_err_ <= GlobalDebugLevel) \
+ pr_info(DRIVER_PREFIX __VA_ARGS__); \
+ } while (0)
+
+#define MSG_88E(...) \
+ do { \
+ if (_drv_err_ <= GlobalDebugLevel) \
+ pr_info(DRIVER_PREFIX __VA_ARGS__); \
+ } while (0)
+
+#define RT_TRACE(_comp, _level, fmt) \
+ do { \
+ if (_level <= GlobalDebugLevel) { \
+ pr_info("%s [0x%08x,%d]", DRIVER_PREFIX, \
+ (unsigned int)_comp, _level); \
+ pr_info fmt; \
+ } \
+ } while (0)
+
+#define RT_PRINT_DATA(_comp, _level, _titlestring, _hexdata, _hexdatalen)\
+ do { \
+ if (_level <= GlobalDebugLevel) { \
+ int __i; \
+ u8 *ptr = (u8 *)_hexdata; \
+ pr_info("%s", DRIVER_PREFIX); \
+ pr_info(_titlestring); \
+ for (__i = 0; __i < (int)_hexdatalen; __i++ ) { \
+ pr_info("%02X%s", ptr[__i], \
+ (((__i + 1) % 4) == 0) ? \
+ " " : " "); \
+ if (((__i + 1) % 16) == 0) \
+ printk("\n"); \
+ } \
+ printk("\n"); \
+ } \
+ } while (0)
+
+int proc_get_drv_version(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_write_reg(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_write_reg(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+int proc_get_read_reg(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_read_reg(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_fwstate(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_sec_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_mlmext_state(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_qos_option(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_ht_option(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_rf_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_ap_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_adapter_state(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_trx_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_mac_reg_dump1(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_mac_reg_dump2(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_mac_reg_dump3(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_bb_reg_dump1(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_bb_reg_dump2(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_bb_reg_dump3(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rf_reg_dump1(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rf_reg_dump2(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rf_reg_dump3(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rf_reg_dump4(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+#ifdef CONFIG_88EU_AP_MODE
+
+int proc_get_all_sta_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+#endif
+
+int proc_get_best_channel(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rx_signal(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_rx_signal(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_ht_enable(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_ht_enable(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_cbw40_enable(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_cbw40_enable(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_ampdu_enable(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_ampdu_enable(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_rx_stbc(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_rx_stbc(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_two_path_rssi(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rssi_disp(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_rssi_disp(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+#ifdef CONFIG_BT_COEXIST
+int proc_get_btcoex_dbg(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_btcoex_dbg(struct file *file, const char *buffer,
+ signed long count, void *data);
+
+#endif /* CONFIG_BT_COEXIST */
+
+#endif /* __RTW_DEBUG_H__ */
diff --git a/drivers/staging/r8188eu/include/rtw_eeprom.h b/drivers/staging/r8188eu/include/rtw_eeprom.h
new file mode 100644
index 000000000000..0b27eb7325c5
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_eeprom.h
@@ -0,0 +1,130 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_EEPROM_H__
+#define __RTW_EEPROM_H__
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define RTL8712_EEPROM_ID 0x8712
+
+#define HWSET_MAX_SIZE_512 512
+#define EEPROM_MAX_SIZE HWSET_MAX_SIZE_512
+
+#define CLOCK_RATE 50 /* 100us */
+
+/* EEPROM opcodes */
+#define EEPROM_READ_OPCODE 06
+#define EEPROM_WRITE_OPCODE 05
+#define EEPROM_ERASE_OPCODE 07
+#define EEPROM_EWEN_OPCODE 19 /* Erase/write enable */
+#define EEPROM_EWDS_OPCODE 16 /* Erase/write disable */
+
+/* Country codes */
+#define USA 0x555320
+#define EUROPE 0x1 /* temp, should be provided later */
+#define JAPAN 0x2 /* temp, should be provided later */
+
+#define EEPROM_CID_DEFAULT 0x0
+#define EEPROM_CID_ALPHA 0x1
+#define EEPROM_CID_Senao 0x3
+#define EEPROM_CID_NetCore 0x5
+#define EEPROM_CID_CAMEO 0X8
+#define EEPROM_CID_SITECOM 0x9
+#define EEPROM_CID_COREGA 0xB
+#define EEPROM_CID_EDIMAX_BELK 0xC
+#define EEPROM_CID_SERCOMM_BELK 0xE
+#define EEPROM_CID_CAMEO1 0xF
+#define EEPROM_CID_WNC_COREGA 0x12
+#define EEPROM_CID_CLEVO 0x13
+#define EEPROM_CID_WHQL 0xFE
+
+/* Customer ID, note that: */
+/* This variable is initiailzed through EEPROM or registry, */
+/* however, its definition may be different with that in EEPROM for */
+/* EEPROM size consideration. So, we have to perform proper translation
+ * between them. */
+/* Besides, CustomerID of registry has precedence of that of EEPROM. */
+/* defined below. 060703, by rcnjko. */
+enum RT_CUSTOMER_ID {
+ RT_CID_DEFAULT = 0,
+ RT_CID_8187_ALPHA0 = 1,
+ RT_CID_8187_SERCOMM_PS = 2,
+ RT_CID_8187_HW_LED = 3,
+ RT_CID_8187_NETGEAR = 4,
+ RT_CID_WHQL = 5,
+ RT_CID_819x_CAMEO = 6,
+ RT_CID_819x_RUNTOP = 7,
+ RT_CID_819x_Senao = 8,
+ RT_CID_TOSHIBA = 9, /* Merge by Jacken, 2008/01/31. */
+ RT_CID_819x_Netcore = 10,
+ RT_CID_Nettronix = 11,
+ RT_CID_DLINK = 12,
+ RT_CID_PRONET = 13,
+ RT_CID_COREGA = 14,
+ RT_CID_CHINA_MOBILE = 15,
+ RT_CID_819x_ALPHA = 16,
+ RT_CID_819x_Sitecom = 17,
+ RT_CID_CCX = 18, /* It's set under CCX logo test and isn't demanded
+ * for CCX functions, but for test behavior like retry
+ * limit and tx report. By Bruce, 2009-02-17. */
+ RT_CID_819x_Lenovo = 19,
+ RT_CID_819x_QMI = 20,
+ RT_CID_819x_Edimax_Belkin = 21,
+ RT_CID_819x_Sercomm_Belkin = 22,
+ RT_CID_819x_CAMEO1 = 23,
+ RT_CID_819x_MSI = 24,
+ RT_CID_819x_Acer = 25,
+ RT_CID_819x_AzWave_ASUS = 26,
+ RT_CID_819x_AzWave = 27, /* For AzWave in PCIe,i
+ * The ID is AzWave use and not only Asus */
+ RT_CID_819x_HP = 28,
+ RT_CID_819x_WNC_COREGA = 29,
+ RT_CID_819x_Arcadyan_Belkin = 30,
+ RT_CID_819x_SAMSUNG = 31,
+ RT_CID_819x_CLEVO = 32,
+ RT_CID_819x_DELL = 33,
+ RT_CID_819x_PRONETS = 34,
+ RT_CID_819x_Edimax_ASUS = 35,
+ RT_CID_819x_CAMEO_NETGEAR = 36,
+ RT_CID_PLANEX = 37,
+ RT_CID_CC_C = 38,
+ RT_CID_819x_Xavi = 39,
+ RT_CID_819x_FUNAI_TV = 40,
+ RT_CID_819x_ALPHA_WD=41,
+};
+
+struct eeprom_priv {
+ u8 bautoload_fail_flag;
+ u8 bloadfile_fail_flag;
+ u8 bloadmac_fail_flag;
+ u8 mac_addr[6]; /* PermanentAddress */
+ u16 channel_plan;
+ u8 EepromOrEfuse;
+ u8 efuse_eeprom_data[HWSET_MAX_SIZE_512] __aligned(4);
+};
+
+void eeprom_write16(struct adapter *padapter, u16 reg, u16 data);
+u16 eeprom_read16(struct adapter *padapter, u16 reg);
+void read_eeprom_content(struct adapter *padapter);
+void eeprom_read_sz(struct adapter *adapt, u16 reg, u8 *data, u32 sz);
+void read_eeprom_content_by_attrib(struct adapter *padapter);
+
+#endif /* __RTL871X_EEPROM_H__ */
diff --git a/drivers/staging/r8188eu/include/rtw_efuse.h b/drivers/staging/r8188eu/include/rtw_efuse.h
new file mode 100644
index 000000000000..cee6b5e8b070
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_efuse.h
@@ -0,0 +1,150 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_EFUSE_H__
+#define __RTW_EFUSE_H__
+
+#include <osdep_service.h>
+
+#define EFUSE_ERROE_HANDLE 1
+
+#define PG_STATE_HEADER 0x01
+#define PG_STATE_WORD_0 0x02
+#define PG_STATE_WORD_1 0x04
+#define PG_STATE_WORD_2 0x08
+#define PG_STATE_WORD_3 0x10
+#define PG_STATE_DATA 0x20
+
+#define PG_SWBYTE_H 0x01
+#define PG_SWBYTE_L 0x02
+
+#define PGPKT_DATA_SIZE 8
+
+#define EFUSE_WIFI 0
+#define EFUSE_BT 1
+
+enum _EFUSE_DEF_TYPE {
+ TYPE_EFUSE_MAX_SECTION = 0,
+ TYPE_EFUSE_REAL_CONTENT_LEN = 1,
+ TYPE_AVAILABLE_EFUSE_BYTES_BANK = 2,
+ TYPE_AVAILABLE_EFUSE_BYTES_TOTAL = 3,
+ TYPE_EFUSE_MAP_LEN = 4,
+ TYPE_EFUSE_PROTECT_BYTES_BANK = 5,
+ TYPE_EFUSE_CONTENT_LEN_BANK = 6,
+};
+
+/* E-Fuse */
+#define EFUSE_MAP_SIZE 512
+#define EFUSE_MAX_SIZE 256
+/* end of E-Fuse */
+
+#define EFUSE_MAX_MAP_LEN 512
+#define EFUSE_MAX_HW_SIZE 512
+#define EFUSE_MAX_SECTION_BASE 16
+
+#define EXT_HEADER(header) ((header & 0x1F) == 0x0F)
+#define ALL_WORDS_DISABLED(wde) ((wde & 0x0F) == 0x0F)
+#define GET_HDR_OFFSET_2_0(header) ((header & 0xE0) >> 5)
+
+#define EFUSE_REPEAT_THRESHOLD_ 3
+
+/* The following is for BT Efuse definition */
+#define EFUSE_BT_MAX_MAP_LEN 1024
+#define EFUSE_MAX_BANK 4
+#define EFUSE_MAX_BT_BANK (EFUSE_MAX_BANK-1)
+/*--------------------------Define Parameters-------------------------------*/
+#define EFUSE_MAX_WORD_UNIT 4
+
+/*------------------------------Define structure----------------------------*/
+struct pgpkt {
+ u8 offset;
+ u8 word_en;
+ u8 data[8];
+ u8 word_cnts;
+};
+
+/*------------------------------Define structure----------------------------*/
+struct efuse_hal {
+ u8 fakeEfuseBank;
+ u32 fakeEfuseUsedBytes;
+ u8 fakeEfuseContent[EFUSE_MAX_HW_SIZE];
+ u8 fakeEfuseInitMap[EFUSE_MAX_MAP_LEN];
+ u8 fakeEfuseModifiedMap[EFUSE_MAX_MAP_LEN];
+
+ u16 BTEfuseUsedBytes;
+ u8 BTEfuseUsedPercentage;
+ u8 BTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
+ u8 BTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN];
+ u8 BTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN];
+
+ u16 fakeBTEfuseUsedBytes;
+ u8 fakeBTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
+ u8 fakeBTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN];
+ u8 fakeBTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN];
+};
+
+/*------------------------Export global variable----------------------------*/
+extern u8 fakeEfuseBank;
+extern u32 fakeEfuseUsedBytes;
+extern u8 fakeEfuseContent[];
+extern u8 fakeEfuseInitMap[];
+extern u8 fakeEfuseModifiedMap[];
+
+extern u32 BTEfuseUsedBytes;
+extern u8 BTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
+extern u8 BTEfuseInitMap[];
+extern u8 BTEfuseModifiedMap[];
+
+extern u32 fakeBTEfuseUsedBytes;
+extern u8 fakeBTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
+extern u8 fakeBTEfuseInitMap[];
+extern u8 fakeBTEfuseModifiedMap[];
+/*------------------------Export global variable----------------------------*/
+
+u8 efuse_GetCurrentSize(struct adapter *adapter, u16 *size);
+u16 efuse_GetMaxSize(struct adapter *adapter);
+u8 rtw_efuse_access(struct adapter *adapter, u8 read, u16 start_addr,
+ u16 cnts, u8 *data);
+u8 rtw_efuse_map_read(struct adapter *adapter, u16 addr, u16 cnts, u8 *data);
+u8 rtw_efuse_map_write(struct adapter *adapter, u16 addr, u16 cnts, u8 *data);
+u8 rtw_BT_efuse_map_read(struct adapter *adapter, u16 addr,
+ u16 cnts, u8 *data);
+u8 rtw_BT_efuse_map_write(struct adapter *adapter, u16 addr,
+ u16 cnts, u8 *data);
+u16 Efuse_GetCurrentSize(struct adapter *adapter, u8 efusetype, bool test);
+u8 Efuse_CalculateWordCnts(u8 word_en);
+void ReadEFuseByte(struct adapter *adapter, u16 _offset, u8 *pbuf, bool test);
+void EFUSE_GetEfuseDefinition(struct adapter *adapt, u8 type, u8 type1,
+ void *out, bool bPseudoTest);
+u8 efuse_OneByteRead(struct adapter *adapter, u16 addr, u8 *data, bool test);
+u8 efuse_OneByteWrite(struct adapter *adapter, u16 addr, u8 data, bool test);
+
+void Efuse_PowerSwitch(struct adapter *adapt,u8 bWrite,u8 PwrState);
+int Efuse_PgPacketRead(struct adapter *adapt, u8 offset, u8 *data, bool test);
+int Efuse_PgPacketWrite(struct adapter *adapter, u8 offset, u8 word, u8 *data,
+ bool test);
+void efuse_WordEnableDataRead(u8 word_en, u8 *sourdata, u8 *targetdata);
+u8 Efuse_WordEnableDataWrite(struct adapter *adapter, u16 efuse_addr,
+ u8 word_en, u8 *data, bool test);
+
+u8 EFUSE_Read1Byte(struct adapter *adapter, u16 address);
+void EFUSE_ShadowMapUpdate(struct adapter *adapter, u8 efusetype, bool test);
+void EFUSE_ShadowRead(struct adapter *adapt, u8 type, u16 offset, u32 *val);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_event.h b/drivers/staging/r8188eu/include/rtw_event.h
new file mode 100644
index 000000000000..f7004d6a3bbb
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_event.h
@@ -0,0 +1,113 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_EVENT_H_
+#define _RTW_EVENT_H_
+
+#include <osdep_service.h>
+
+#include <wlan_bssdef.h>
+#include <linux/semaphore.h>
+#include <linux/sem.h>
+
+/*
+Used to report a bss has been scanned
+*/
+struct survey_event {
+ struct wlan_bssid_ex bss;
+};
+
+/*
+Used to report that the requested site survey has been done.
+
+bss_cnt indicates the number of bss that has been reported.
+
+*/
+struct surveydone_event {
+ unsigned int bss_cnt;
+
+};
+
+/*
+Used to report the link result of joinning the given bss
+
+join_res:
+-1: authentication fail
+-2: association fail
+> 0: TID
+
+*/
+struct joinbss_event {
+ struct wlan_network network;
+};
+
+/*
+Used to report a given STA has joinned the created BSS.
+It is used in AP/Ad-HoC(M) mode.
+*/
+
+struct stassoc_event {
+ unsigned char macaddr[6];
+ unsigned char rsvd[2];
+ int cam_id;
+};
+
+struct stadel_event {
+ unsigned char macaddr[6];
+ unsigned char rsvd[2]; /* for reason */
+ int mac_id;
+};
+
+struct addba_event {
+ unsigned int tid;
+};
+
+#define GEN_EVT_CODE(event) event ## _EVT_
+
+struct fwevent {
+ u32 parmsize;
+ void (*event_callback)(struct adapter *dev, u8 *pbuf);
+};
+
+#define C2HEVENT_SZ 32
+
+struct event_node {
+ unsigned char *node;
+ unsigned char evt_code;
+ unsigned short evt_sz;
+ int *caller_ff_tail;
+ int caller_ff_sz;
+};
+
+struct c2hevent_queue {
+ int head;
+ int tail;
+ struct event_node nodes[C2HEVENT_SZ];
+ unsigned char seq;
+};
+
+#define NETWORK_QUEUE_SZ 4
+
+struct network_queue {
+ int head;
+ int tail;
+ struct wlan_bssid_ex networks[NETWORK_QUEUE_SZ];
+};
+
+#endif /* _WLANEVENT_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_ht.h b/drivers/staging/r8188eu/include/rtw_ht.h
new file mode 100644
index 000000000000..80154224af92
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ht.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_HT_H_
+#define _RTW_HT_H_
+
+#include <osdep_service.h>
+#include "wifi.h"
+
+struct ht_priv {
+ u32 ht_option;
+ u32 ampdu_enable;/* for enable Tx A-MPDU */
+ u32 tx_amsdu_enable;/* for enable Tx A-MSDU */
+ u32 tx_amdsu_maxlen; /* 1: 8k, 0:4k ; default:8k, for tx */
+ u32 rx_ampdu_maxlen; /* for rx reordering ctrl win_sz,
+ * updated when join_callback. */
+ u8 bwmode;/* */
+ u8 ch_offset;/* PRIME_CHNL_OFFSET */
+ u8 sgi;/* short GI */
+
+ /* for processing Tx A-MPDU */
+ u8 agg_enable_bitmap;
+ u8 candidate_tid_bitmap;
+
+ struct ieee80211_ht_cap ht_cap;
+};
+
+#endif /* _RTL871X_HT_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
new file mode 100644
index 000000000000..d7dee537c252
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_io.h
@@ -0,0 +1,387 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _RTW_IO_H_
+#define _RTW_IO_H_
+
+#include <osdep_service.h>
+#include <osdep_intf.h>
+
+#include <asm/byteorder.h>
+#include <linux/semaphore.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+
+#define rtw_usb_buffer_alloc(dev, size, dma) \
+ usb_alloc_coherent((dev), (size), (in_interrupt() ? \
+ GFP_ATOMIC : GFP_KERNEL), (dma))
+#define rtw_usb_buffer_free(dev, size, addr, dma) \
+ usb_free_coherent((dev), (size), (addr), (dma))
+
+#define NUM_IOREQ 8
+
+#define MAX_PROT_SZ (64-16)
+
+#define _IOREADY 0
+#define _IO_WAIT_COMPLETE 1
+#define _IO_WAIT_RSP 2
+
+/* IO COMMAND TYPE */
+#define _IOSZ_MASK_ (0x7F)
+#define _IO_WRITE_ BIT(7)
+#define _IO_FIXED_ BIT(8)
+#define _IO_BURST_ BIT(9)
+#define _IO_BYTE_ BIT(10)
+#define _IO_HW_ BIT(11)
+#define _IO_WORD_ BIT(12)
+#define _IO_SYNC_ BIT(13)
+#define _IO_CMDMASK_ (0x1F80)
+
+/*
+ For prompt mode accessing, caller shall free io_req
+ Otherwise, io_handler will free io_req
+*/
+
+/* IO STATUS TYPE */
+#define _IO_ERR_ BIT(2)
+#define _IO_SUCCESS_ BIT(1)
+#define _IO_DONE_ BIT(0)
+
+#define IO_RD32 (_IO_SYNC_ | _IO_WORD_)
+#define IO_RD16 (_IO_SYNC_ | _IO_HW_)
+#define IO_RD8 (_IO_SYNC_ | _IO_BYTE_)
+
+#define IO_RD32_ASYNC (_IO_WORD_)
+#define IO_RD16_ASYNC (_IO_HW_)
+#define IO_RD8_ASYNC (_IO_BYTE_)
+
+#define IO_WR32 (_IO_WRITE_ | _IO_SYNC_ | _IO_WORD_)
+#define IO_WR16 (_IO_WRITE_ | _IO_SYNC_ | _IO_HW_)
+#define IO_WR8 (_IO_WRITE_ | _IO_SYNC_ | _IO_BYTE_)
+
+#define IO_WR32_ASYNC (_IO_WRITE_ | _IO_WORD_)
+#define IO_WR16_ASYNC (_IO_WRITE_ | _IO_HW_)
+#define IO_WR8_ASYNC (_IO_WRITE_ | _IO_BYTE_)
+
+/*
+ Only Sync. burst accessing is provided.
+*/
+
+#define IO_WR_BURST(x) \
+ (_IO_WRITE_ | _IO_SYNC_ | _IO_BURST_ | ((x) & _IOSZ_MASK_))
+#define IO_RD_BURST(x) \
+ (_IO_SYNC_ | _IO_BURST_ | ((x) & _IOSZ_MASK_))
+
+/* below is for the intf_option bit defition... */
+
+#define _INTF_ASYNC_ BIT(0) /* support async io */
+
+struct intf_priv;
+struct intf_hdl;
+struct io_queue;
+
+struct _io_ops {
+ u8 (*_read8)(struct intf_hdl *pintfhdl, u32 addr);
+ u16 (*_read16)(struct intf_hdl *pintfhdl, u32 addr);
+ u32 (*_read32)(struct intf_hdl *pintfhdl, u32 addr);
+ int (*_write8)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
+ int (*_write16)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
+ int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
+ int (*_writeN)(struct intf_hdl *pintfhdl, u32 addr, u32 length,
+ u8 *pdata);
+ int (*_write8_async)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
+ int (*_write16_async)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
+ int (*_write32_async)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
+ void (*_read_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
+ u8 *pmem);
+ void (*_write_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
+ u8 *pmem);
+ void (*_sync_irp_protocol_rw)(struct io_queue *pio_q);
+ u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr);
+ u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
+ u8 *pmem);
+ u32 (*_write_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
+ u8 *pmem);
+ u32 (*_write_scsi)(struct intf_hdl *pintfhdl,u32 cnt, u8 *pmem);
+ void (*_read_port_cancel)(struct intf_hdl *pintfhdl);
+ void (*_write_port_cancel)(struct intf_hdl *pintfhdl);
+};
+
+struct io_req {
+ struct list_head list;
+ u32 addr;
+ u32 val;
+ u32 command;
+ u32 status;
+ u8 *pbuf;
+ struct semaphore sema;
+
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req, u8 *cnxt);
+ u8 *cnxt;
+};
+
+struct intf_hdl {
+ struct adapter *padapter;
+ struct dvobj_priv *pintf_dev;
+ struct _io_ops io_ops;
+};
+
+struct reg_protocol_rd {
+#ifdef __LITTLE_ENDIAN
+ /* DW1 */
+ u32 NumOfTrans:4;
+ u32 Reserved1:4;
+ u32 Reserved2:24;
+ /* DW2 */
+ u32 ByteCount:7;
+ u32 WriteEnable:1; /* 0:read, 1:write */
+ u32 FixOrContinuous:1; /* 0:continuous, 1: Fix */
+ u32 BurstMode:1;
+ u32 Byte1Access:1;
+ u32 Byte2Access:1;
+ u32 Byte4Access:1;
+ u32 Reserved3:3;
+ u32 Reserved4:16;
+ /* DW3 */
+ u32 BusAddress;
+ /* DW4 */
+ /* u32 Value; */
+#else
+/* DW1 */
+ u32 Reserved1:4;
+ u32 NumOfTrans:4;
+ u32 Reserved2:24;
+ /* DW2 */
+ u32 WriteEnable:1;
+ u32 ByteCount:7;
+ u32 Reserved3:3;
+ u32 Byte4Access:1;
+
+ u32 Byte2Access:1;
+ u32 Byte1Access:1;
+ u32 BurstMode:1;
+ u32 FixOrContinuous:1;
+ u32 Reserved4:16;
+ /* DW3 */
+ u32 BusAddress;
+
+ /* DW4 */
+#endif
+};
+
+struct reg_protocol_wt {
+#ifdef __LITTLE_ENDIAN
+ /* DW1 */
+ u32 NumOfTrans:4;
+ u32 Reserved1:4;
+ u32 Reserved2:24;
+ /* DW2 */
+ u32 ByteCount:7;
+ u32 WriteEnable:1; /* 0:read, 1:write */
+ u32 FixOrContinuous:1; /* 0:continuous, 1: Fix */
+ u32 BurstMode:1;
+ u32 Byte1Access:1;
+ u32 Byte2Access:1;
+ u32 Byte4Access:1;
+ u32 Reserved3:3;
+ u32 Reserved4:16;
+ /* DW3 */
+ u32 BusAddress;
+ /* DW4 */
+ u32 Value;
+#else
+ /* DW1 */
+ u32 Reserved1 :4;
+ u32 NumOfTrans:4;
+ u32 Reserved2:24;
+ /* DW2 */
+ u32 WriteEnable:1;
+ u32 ByteCount:7;
+ u32 Reserved3:3;
+ u32 Byte4Access:1;
+ u32 Byte2Access:1;
+ u32 Byte1Access:1;
+ u32 BurstMode:1;
+ u32 FixOrContinuous:1;
+ u32 Reserved4:16;
+ /* DW3 */
+ u32 BusAddress;
+ /* DW4 */
+ u32 Value;
+#endif
+};
+
+/*
+Below is the data structure used by _io_handler
+*/
+
+struct io_queue {
+ spinlock_t lock;
+ struct list_head free_ioreqs;
+ struct list_head pending; /* The io_req list that will be served
+ * in the single protocol read/write.*/
+ struct list_head processing;
+ u8 *free_ioreqs_buf; /* 4-byte aligned */
+ u8 *pallocated_free_ioreqs_buf;
+ struct intf_hdl intf;
+};
+
+struct io_priv {
+ struct adapter *padapter;
+ struct intf_hdl intf;
+};
+
+uint ioreq_flush(struct adapter *adapter, struct io_queue *ioqueue);
+void sync_ioreq_enqueue(struct io_req *preq,struct io_queue *ioqueue);
+uint sync_ioreq_flush(struct adapter *adapter, struct io_queue *ioqueue);
+uint free_ioreq(struct io_req *preq, struct io_queue *pio_queue);
+struct io_req *alloc_ioreq(struct io_queue *pio_q);
+
+uint register_intf_hdl(u8 *dev, struct intf_hdl *pintfhdl);
+void unregister_intf_hdl(struct intf_hdl *pintfhdl);
+
+void _rtw_attrib_read(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void _rtw_attrib_write(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+
+u8 _rtw_read8(struct adapter *adapter, u32 addr);
+u16 _rtw_read16(struct adapter *adapter, u32 addr);
+u32 _rtw_read32(struct adapter *adapter, u32 addr);
+void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void _rtw_read_port_cancel(struct adapter *adapter);
+
+int _rtw_write8(struct adapter *adapter, u32 addr, u8 val);
+int _rtw_write16(struct adapter *adapter, u32 addr, u16 val);
+int _rtw_write32(struct adapter *adapter, u32 addr, u32 val);
+int _rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
+
+int _rtw_write8_async(struct adapter *adapter, u32 addr, u8 val);
+int _rtw_write16_async(struct adapter *adapter, u32 addr, u16 val);
+int _rtw_write32_async(struct adapter *adapter, u32 addr, u32 val);
+
+void _rtw_write_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+u32 _rtw_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
+ u8 *pmem, int timeout_ms);
+void _rtw_write_port_cancel(struct adapter *adapter);
+
+#define rtw_read8(adapter, addr) _rtw_read8((adapter), (addr))
+#define rtw_read16(adapter, addr) _rtw_read16((adapter), (addr))
+#define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr))
+#define rtw_read_mem(adapter, addr, cnt, mem) \
+ _rtw_read_mem((adapter), (addr), (cnt), (mem))
+#define rtw_read_port(adapter, addr, cnt, mem) \
+ _rtw_read_port((adapter), (addr), (cnt), (mem))
+#define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
+
+#define rtw_write8(adapter, addr, val) \
+ _rtw_write8((adapter), (addr), (val))
+#define rtw_write16(adapter, addr, val) \
+ _rtw_write16((adapter), (addr), (val))
+#define rtw_write32(adapter, addr, val) \
+ _rtw_write32((adapter), (addr), (val))
+#define rtw_writeN(adapter, addr, length, data) \
+ _rtw_writeN((adapter), (addr), (length), (data))
+#define rtw_write8_async(adapter, addr, val) \
+ _rtw_write8_async((adapter), (addr), (val))
+#define rtw_write16_async(adapter, addr, val) \
+ _rtw_write16_async((adapter), (addr), (val))
+#define rtw_write32_async(adapter, addr, val) \
+ _rtw_write32_async((adapter), (addr), (val))
+#define rtw_write_mem(adapter, addr, cnt, mem) \
+ _rtw_write_mem((adapter), (addr), (cnt), (mem))
+#define rtw_write_port(adapter, addr, cnt, mem) \
+ _rtw_write_port((adapter), (addr), (cnt), (mem))
+#define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms) \
+ _rtw_write_port_and_wait((adapter), (addr), (cnt), (mem), (timeout_ms))
+#define rtw_write_port_cancel(adapter) _rtw_write_port_cancel((adapter))
+
+void rtw_write_scsi(struct adapter *adapter, u32 cnt, u8 *pmem);
+
+/* ioreq */
+void ioreq_read8(struct adapter *adapter, u32 addr, u8 *pval);
+void ioreq_read16(struct adapter *adapter, u32 addr, u16 *pval);
+void ioreq_read32(struct adapter *adapter, u32 addr, u32 *pval);
+void ioreq_write8(struct adapter *adapter, u32 addr, u8 val);
+void ioreq_write16(struct adapter *adapter, u32 addr, u16 val);
+void ioreq_write32(struct adapter *adapter, u32 addr, u32 val);
+
+uint async_read8(struct adapter *adapter, u32 addr, u8 *pbuff,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+uint async_read16(struct adapter *adapter, u32 addr, u8 *pbuff,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+uint async_read32(struct adapter *adapter, u32 addr, u8 *pbuff,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+
+void async_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void async_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+
+void async_write8(struct adapter *adapter, u32 addr, u8 val,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+void async_write16(struct adapter *adapter, u32 addr, u16 val,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+void async_write32(struct adapter *adapter, u32 addr, u32 val,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+
+void async_write_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void async_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+
+int rtw_init_io_priv(struct adapter *padapter,
+ void (*set_intf_ops)(struct _io_ops *pops));
+
+uint alloc_io_queue(struct adapter *adapter);
+void free_io_queue(struct adapter *adapter);
+void async_bus_io(struct io_queue *pio_q);
+void bus_sync_io(struct io_queue *pio_q);
+u32 _ioreq2rwmem(struct io_queue *pio_q);
+void dev_power_down(struct adapter * Adapter, u8 bpwrup);
+
+#define PlatformEFIOWrite1Byte(_a,_b,_c) \
+ rtw_write8(_a,_b,_c)
+#define PlatformEFIOWrite2Byte(_a,_b,_c) \
+ rtw_write16(_a,_b,_c)
+#define PlatformEFIOWrite4Byte(_a,_b,_c) \
+ rtw_write32(_a,_b,_c)
+
+#define PlatformEFIORead1Byte(_a,_b) \
+ rtw_read8(_a,_b)
+#define PlatformEFIORead2Byte(_a,_b) \
+ rtw_read16(_a,_b)
+#define PlatformEFIORead4Byte(_a,_b) \
+ rtw_read32(_a,_b)
+
+#endif /* _RTL8711_IO_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_ioctl.h b/drivers/staging/r8188eu/include/rtw_ioctl.h
new file mode 100644
index 000000000000..8ffa73239819
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ioctl.h
@@ -0,0 +1,120 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_IOCTL_H_
+#define _RTW_IOCTL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#ifndef OID_802_11_CAPABILITY
+ #define OID_802_11_CAPABILITY 0x0d010122
+#endif
+
+#ifndef OID_802_11_PMKID
+ #define OID_802_11_PMKID 0x0d010123
+#endif
+
+/* For DDK-defined OIDs */
+#define OID_NDIS_SEG1 0x00010100
+#define OID_NDIS_SEG2 0x00010200
+#define OID_NDIS_SEG3 0x00020100
+#define OID_NDIS_SEG4 0x01010100
+#define OID_NDIS_SEG5 0x01020100
+#define OID_NDIS_SEG6 0x01020200
+#define OID_NDIS_SEG7 0xFD010100
+#define OID_NDIS_SEG8 0x0D010100
+#define OID_NDIS_SEG9 0x0D010200
+#define OID_NDIS_SEG10 0x0D020200
+
+#define SZ_OID_NDIS_SEG1 23
+#define SZ_OID_NDIS_SEG2 3
+#define SZ_OID_NDIS_SEG3 6
+#define SZ_OID_NDIS_SEG4 6
+#define SZ_OID_NDIS_SEG5 4
+#define SZ_OID_NDIS_SEG6 8
+#define SZ_OID_NDIS_SEG7 7
+#define SZ_OID_NDIS_SEG8 36
+#define SZ_OID_NDIS_SEG9 24
+#define SZ_OID_NDIS_SEG10 19
+
+/* For Realtek-defined OIDs */
+#define OID_MP_SEG1 0xFF871100
+#define OID_MP_SEG2 0xFF818000
+
+#define OID_MP_SEG3 0xFF818700
+#define OID_MP_SEG4 0xFF011100
+
+#define DEBUG_OID(dbg, str) \
+ if ((!dbg)) { \
+ RT_TRACE(_module_rtl871x_ioctl_c_, _drv_info_, \
+ ("%s(%d): %s", __func__, __line__, str)); \
+ }
+
+enum oid_type {
+ QUERY_OID,
+ SET_OID
+};
+
+struct oid_funs_node {
+ unsigned int oid_start; /* the starting number for OID */
+ unsigned int oid_end; /* the ending number for OID */
+ struct oid_obj_priv *node_array;
+ unsigned int array_sz; /* the size of node_array */
+ int query_counter; /* count the number of query hits for this segment */
+ int set_counter; /* count the number of set hits for this segment */
+};
+
+struct oid_par_priv {
+ void *adapter_context;
+ NDIS_OID oid;
+ void *information_buf;
+ u32 information_buf_len;
+ u32 *bytes_rw;
+ u32 *bytes_needed;
+ enum oid_type type_of_oid;
+ u32 dbg;
+};
+
+struct oid_obj_priv {
+ unsigned char dbg; /* 0: without OID debug message
+ * 1: with OID debug message */
+ int (*oidfuns)(struct oid_par_priv *poid_par_priv);
+};
+
+#if defined(_RTW_MP_IOCTL_C_)
+static int oid_null_function(struct oid_par_priv *poid_par_priv) {
+ return NDIS_STATUS_SUCCESS;
+}
+#endif
+
+extern struct iw_handler_def rtw_handlers_def;
+
+int drv_query_info(struct net_device *miniportadaptercontext, NDIS_OID oid,
+ void *informationbuffer, u32 informationbufferlength,
+ u32 *byteswritten, u32 *bytesneeded);
+
+int drv_set_info(struct net_device *MiniportAdapterContext,
+ NDIS_OID oid, void *informationbuffer,
+ u32 informationbufferlength, u32 *bytesread,
+ u32 *bytesneeded);
+
+extern int ui_pid[3];
+
+#endif /* #ifndef __INC_CEINFO_ */
diff --git a/drivers/staging/r8188eu/include/rtw_ioctl_rtl.h b/drivers/staging/r8188eu/include/rtw_ioctl_rtl.h
new file mode 100644
index 000000000000..8fa3858cb776
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ioctl_rtl.h
@@ -0,0 +1,79 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_IOCTL_RTL_H_
+#define _RTW_IOCTL_RTL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+/* oid_rtl_seg_01_01 ************** */
+int oid_rt_get_signal_quality_hdl(struct oid_par_priv *poid_par_priv);/* 84 */
+int oid_rt_get_small_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_middle_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_large_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_tx_retry_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_rx_retry_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_rx_total_packet_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_tx_beacon_ok_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_tx_beacon_err_hdl(struct oid_par_priv *poid_par_priv);
+
+int oid_rt_pro_set_fw_dig_state_hdl(struct oid_par_priv *poid_par_priv);/* 8a */
+int oid_rt_pro_set_fw_ra_state_hdl(struct oid_par_priv *poid_par_priv); /* 8b */
+
+int oid_rt_get_rx_icv_err_hdl(struct oid_par_priv *poid_par_priv);/* 93 */
+int oid_rt_set_encryption_algorithm_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_preamble_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_ap_ip_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_channelplan_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_channelplan_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_preamble_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_bcn_intvl_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_dedicate_probe_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_total_tx_bytes_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_total_rx_bytes_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_current_tx_power_level_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_enc_key_mismatch_count_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_enc_key_match_count_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_channel_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_hardware_radio_off_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_key_mismatch_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_supported_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_channel_list_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_scan_in_progress_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_forced_data_rate_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_wireless_mode_for_scan_list_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_bss_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_scan_with_magic_packet_hdl(struct oid_par_priv *poid_par_priv);
+
+/* oid_rtl_seg_01_03 section start ************** */
+int oid_rt_ap_get_associated_station_list_hdl(struct oid_par_priv *priv);
+int oid_rt_ap_switch_into_ap_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_ap_supported_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_ap_set_passphrase_hdl(struct oid_par_priv *poid_par_priv);
+
+/* oid_rtl_seg_01_11 */
+int oid_rt_pro_rf_write_registry_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_pro_rf_read_registry_hdl(struct oid_par_priv *poid_par_priv);
+
+/* oid_rtl_seg_03_00 section start ************** */
+int oid_rt_get_connect_state_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_default_key_id_hdl(struct oid_par_priv *poid_par_priv);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_ioctl_set.h b/drivers/staging/r8188eu/include/rtw_ioctl_set.h
new file mode 100644
index 000000000000..794f98167c3c
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ioctl_set.h
@@ -0,0 +1,49 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_IOCTL_SET_H_
+#define __RTW_IOCTL_SET_H_
+
+#include <drv_types.h>
+
+typedef u8 NDIS_802_11_PMKID_VALUE[16];
+
+u8 rtw_set_802_11_add_key(struct adapter *adapt, struct ndis_802_11_key *key);
+u8 rtw_set_802_11_authentication_mode(struct adapter *adapt,
+ enum ndis_802_11_auth_mode authmode);
+u8 rtw_set_802_11_bssid(struct adapter*adapter, u8 *bssid);
+u8 rtw_set_802_11_add_wep(struct adapter *adapter, struct ndis_802_11_wep *wep);
+u8 rtw_set_802_11_disassociate(struct adapter *adapter);
+u8 rtw_set_802_11_bssid_list_scan(struct adapter*adapter,
+ struct ndis_802_11_ssid *pssid,
+ int ssid_max_num);
+u8 rtw_set_802_11_infrastructure_mode(struct adapter *adapter,
+ enum ndis_802_11_network_infra type);
+u8 rtw_set_802_11_remove_wep(struct adapter *adapter, u32 keyindex);
+u8 rtw_set_802_11_ssid(struct adapter *adapt, struct ndis_802_11_ssid *ssid);
+u8 rtw_set_802_11_remove_key(struct adapter *adapt,
+ struct ndis_802_11_remove_key *key);
+u8 rtw_validate_ssid(struct ndis_802_11_ssid *ssid);
+u16 rtw_get_cur_max_rate(struct adapter *adapter);
+int rtw_set_scan_mode(struct adapter *adapter, enum rt_scan_type scan_mode);
+int rtw_set_channel_plan(struct adapter *adapter, u8 channel_plan);
+int rtw_set_country(struct adapter *adapter, const char *country_code);
+int rtw_change_ifname(struct adapter *padapter, const char *ifname);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_iol.h b/drivers/staging/r8188eu/include/rtw_iol.h
new file mode 100644
index 000000000000..6949922baa65
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_iol.h
@@ -0,0 +1,84 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_IOL_H_
+#define __RTW_IOL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define IOREG_CMD_END_LEN 4
+
+struct ioreg_cfg {
+ u8 length;
+ u8 cmd_id;
+ __le16 address;
+ __le32 data;
+ __le32 mask;
+};
+
+enum ioreg_cmd {
+ IOREG_CMD_LLT = 0x01,
+ IOREG_CMD_REFUSE = 0x02,
+ IOREG_CMD_EFUSE_PATH = 0x03,
+ IOREG_CMD_WB_REG = 0x04,
+ IOREG_CMD_WW_REG = 0x05,
+ IOREG_CMD_WD_REG = 0x06,
+ IOREG_CMD_W_RF = 0x07,
+ IOREG_CMD_DELAY_US = 0x10,
+ IOREG_CMD_DELAY_MS = 0x11,
+ IOREG_CMD_END = 0xFF,
+};
+
+struct xmit_frame *rtw_IOL_accquire_xmit_frame(struct adapter *adapter);
+int rtw_IOL_append_cmds(struct xmit_frame *xmit_frame, u8 *IOL_cmds,
+ u32 cmd_len);
+int rtw_IOL_append_LLT_cmd(struct xmit_frame *xmit_frame, u8 page_boundary);
+int rtw_IOL_exec_cmds_sync(struct adapter *adapter,
+ struct xmit_frame *xmit_frame, u32 max_wating_ms,
+ u32 bndy_cnt);
+bool rtw_IOL_applied(struct adapter *adapter);
+int rtw_IOL_append_DELAY_US_cmd(struct xmit_frame *xmit_frame, u16 us);
+int rtw_IOL_append_DELAY_MS_cmd(struct xmit_frame *xmit_frame, u16 ms);
+int rtw_IOL_append_END_cmd(struct xmit_frame *xmit_frame);
+
+void read_efuse_from_txpktbuf(struct adapter *adapter, int bcnhead,
+ u8 *content, u16 *size);
+
+int _rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr,
+ u8 value, u8 mask);
+int _rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr,
+ u16 value, u16 mask);
+int _rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr,
+ u32 value, u32 mask);
+int _rtw_IOL_append_WRF_cmd(struct xmit_frame *xmit_frame, u8 rf_path,
+ u16 addr, u32 value, u32 mask);
+#define rtw_IOL_append_WB_cmd(xmit_frame, addr, value, mask) \
+ _rtw_IOL_append_WB_cmd((xmit_frame), (addr), (value) ,(mask))
+#define rtw_IOL_append_WW_cmd(xmit_frame, addr, value, mask) \
+ _rtw_IOL_append_WW_cmd((xmit_frame), (addr), (value),(mask))
+#define rtw_IOL_append_WD_cmd(xmit_frame, addr, value, mask) \
+ _rtw_IOL_append_WD_cmd((xmit_frame), (addr), (value), (mask))
+#define rtw_IOL_append_WRF_cmd(xmit_frame, rf_path, addr, value, mask) \
+ _rtw_IOL_append_WRF_cmd((xmit_frame),(rf_path), (addr), (value), (mask))
+
+u8 rtw_IOL_cmd_boundary_handle(struct xmit_frame *pxmit_frame);
+void rtw_IOL_cmd_buf_dump(struct adapter *Adapter,int buf_len,u8 *pbuf);
+
+#endif /* __RTW_IOL_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_led.h b/drivers/staging/r8188eu/include/rtw_led.h
new file mode 100644
index 000000000000..1e6a8090a753
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_led.h
@@ -0,0 +1,201 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_LED_H_
+#define __RTW_LED_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
+
+#define LED_BLINK_NORMAL_INTERVAL 100
+#define LED_BLINK_SLOWLY_INTERVAL 200
+#define LED_BLINK_LONG_INTERVAL 400
+
+#define LED_BLINK_NO_LINK_INTERVAL_ALPHA 1000
+#define LED_BLINK_LINK_INTERVAL_ALPHA 500 /* 500 */
+#define LED_BLINK_SCAN_INTERVAL_ALPHA 180 /* 150 */
+#define LED_BLINK_FASTER_INTERVAL_ALPHA 50
+#define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA 5000
+
+#define LED_BLINK_NORMAL_INTERVAL_NETTRONIX 100
+#define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX 2000
+
+#define LED_BLINK_SLOWLY_INTERVAL_PORNET 1000
+#define LED_BLINK_NORMAL_INTERVAL_PORNET 100
+
+#define LED_BLINK_FAST_INTERVAL_BITLAND 30
+
+/* 060403, rcnjko: Customized for AzWave. */
+#define LED_CM2_BLINK_ON_INTERVAL 250
+#define LED_CM2_BLINK_OFF_INTERVAL 4750
+
+#define LED_CM8_BLINK_INTERVAL 500 /* for QMI */
+#define LED_CM8_BLINK_OFF_INTERVAL 3750 /* for QMI */
+
+/* 080124, lanhsin: Customized for RunTop */
+#define LED_RunTop_BLINK_INTERVAL 300
+
+/* 060421, rcnjko: Customized for Sercomm Printer Server case. */
+#define LED_CM3_BLINK_INTERVAL 1500
+
+enum LED_CTL_MODE {
+ LED_CTL_POWER_ON = 1,
+ LED_CTL_LINK = 2,
+ LED_CTL_NO_LINK = 3,
+ LED_CTL_TX = 4,
+ LED_CTL_RX = 5,
+ LED_CTL_SITE_SURVEY = 6,
+ LED_CTL_POWER_OFF = 7,
+ LED_CTL_START_TO_LINK = 8,
+ LED_CTL_START_WPS = 9,
+ LED_CTL_STOP_WPS = 10,
+ LED_CTL_START_WPS_BOTTON = 11, /* added for runtop */
+ LED_CTL_STOP_WPS_FAIL = 12, /* added for ALPHA */
+ LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, /* added for BELKIN */
+ LED_CTL_CONNECTION_NO_TRANSFER = 14,
+};
+
+enum LED_STATE_871x {
+ LED_UNKNOWN = 0,
+ RTW_LED_ON = 1,
+ RTW_LED_OFF = 2,
+ LED_BLINK_NORMAL = 3,
+ LED_BLINK_SLOWLY = 4,
+ LED_BLINK_POWER_ON = 5,
+ LED_BLINK_SCAN = 6, /* LED is blinking during scanning period,
+ * the # of times to blink is depend on time
+ * for scanning. */
+ LED_BLINK_NO_LINK = 7, /* LED is blinking during no link state. */
+ LED_BLINK_StartToBlink = 8,/* Customzied for Sercomm Printer
+ * Server case */
+ LED_BLINK_TXRX = 9,
+ LED_BLINK_WPS = 10, /* LED is blinkg during WPS communication */
+ LED_BLINK_WPS_STOP = 11, /* for ALPHA */
+ LED_BLINK_WPS_STOP_OVERLAP = 12, /* for BELKIN */
+ LED_BLINK_RUNTOP = 13, /* Customized for RunTop */
+ LED_BLINK_CAMEO = 14,
+ LED_BLINK_XAVI = 15,
+ LED_BLINK_ALWAYS_ON = 16,
+};
+
+enum LED_PIN_871x {
+ LED_PIN_NULL = 0,
+ LED_PIN_LED0 = 1,
+ LED_PIN_LED1 = 2,
+ LED_PIN_LED2 = 3,
+ LED_PIN_GPIO0 = 4,
+};
+
+struct LED_871x {
+ struct adapter *padapter;
+
+ enum LED_PIN_871x LedPin; /* Identify how to implement this
+ * SW led. */
+ enum LED_STATE_871x CurrLedState; /* Current LED state. */
+ enum LED_STATE_871x BlinkingLedState; /* Next state for blinking,
+ * either RTW_LED_ON or RTW_LED_OFF are. */
+
+ u8 bLedOn; /* true if LED is ON, false if LED is OFF. */
+
+ u8 bLedBlinkInProgress; /* true if it is blinking, false o.w.. */
+
+ u8 bLedWPSBlinkInProgress;
+
+ u32 BlinkTimes; /* Number of times to toggle led state for blinking. */
+
+ struct timer_list BlinkTimer; /* Timer object for led blinking. */
+
+ u8 bSWLedCtrl;
+
+ /* ALPHA, added by chiyoko, 20090106 */
+ u8 bLedNoLinkBlinkInProgress;
+ u8 bLedLinkBlinkInProgress;
+ u8 bLedStartToLinkBlinkInProgress;
+ u8 bLedScanBlinkInProgress;
+ struct work_struct BlinkWorkItem; /* Workitem used by BlinkTimer to
+ * manipulate H/W to blink LED. */
+};
+
+#define IS_LED_WPS_BLINKING(_LED_871x) \
+ (((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS || \
+ ((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS_STOP || \
+ ((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress)
+
+#define IS_LED_BLINKING(_LED_871x) \
+ (((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress || \
+ ((struct LED_871x *)_LED_871x)->bLedScanBlinkInProgress)
+
+/* LED customization. */
+
+enum LED_STRATEGY_871x {
+ SW_LED_MODE0 = 0, /* SW control 1 LED via GPIO0. It is default option.*/
+ SW_LED_MODE1= 1, /* 2 LEDs, through LED0 and LED1. For ALPHA. */
+ SW_LED_MODE2 = 2, /* SW control 1 LED via GPIO0, customized for AzWave
+ * 8187 minicard. */
+ SW_LED_MODE3 = 3, /* SW control 1 LED via GPIO0, customized for Sercomm
+ * Printer Server case. */
+ SW_LED_MODE4 = 4, /* for Edimax / Belkin */
+ SW_LED_MODE5 = 5, /* for Sercomm / Belkin */
+ SW_LED_MODE6 = 6, /* for 88CU minicard, porting from ce SW_LED_MODE7 */
+ HW_LED = 50, /* HW control 2 LEDs, LED0 and LED1 (there are 4
+ * different control modes, see MAC.CONFIG1 for details.)*/
+ LED_ST_NONE = 99,
+};
+
+void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE LedAction);
+
+struct led_priv{
+ /* add for led control */
+ struct LED_871x SwLed0;
+ struct LED_871x SwLed1;
+ enum LED_STRATEGY_871x LedStrategy;
+ u8 bRegUseLed;
+ void (*LedControlHandler)(struct adapter *padapter,
+ enum LED_CTL_MODE LedAction);
+ /* add for led control */
+};
+
+#define rtw_led_control(adapt, action) \
+ do { \
+ if ((adapt)->ledpriv.LedControlHandler) \
+ (adapt)->ledpriv.LedControlHandler((adapt), (action)); \
+ } while (0)
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 15, 0)
+void BlinkTimerCallback(struct timer_list *t);
+#else
+void BlinkTimerCallback(void *data);
+#endif
+void BlinkWorkItemCallback(struct work_struct *work);
+
+void ResetLedStatus(struct LED_871x * pLed);
+
+void InitLed871x(struct adapter *padapter, struct LED_871x *pLed,
+ enum LED_PIN_871x LedPin);
+
+void DeInitLed871x(struct LED_871x *pLed);
+
+/* hal... */
+void BlinkHandler(struct LED_871x * pLed);
+void SwLedOn(struct adapter *padapter, struct LED_871x *pLed);
+void SwLedOff(struct adapter *padapter, struct LED_871x *pLed);
+
+#endif /* __RTW_LED_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_mlme.h b/drivers/staging/r8188eu/include/rtw_mlme.h
new file mode 100644
index 000000000000..a53a567b2960
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mlme.h
@@ -0,0 +1,649 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_MLME_H_
+#define __RTW_MLME_H_
+
+#include <osdep_service.h>
+#include <mlme_osdep.h>
+#include <drv_types.h>
+#include <wlan_bssdef.h>
+
+#define MAX_BSS_CNT 128
+#define MAX_JOIN_TIMEOUT 6500
+
+/* Increase the scanning timeout because of increasing the SURVEY_TO value. */
+
+#define SCANNING_TIMEOUT 8000
+
+#define SCAN_INTERVAL (30) /* unit:2sec, 30*2=60sec */
+
+#define SCANQUEUE_LIFETIME 20 /* unit:sec */
+
+#define WIFI_NULL_STATE 0x00000000
+
+#define WIFI_ASOC_STATE 0x00000001 /* Under Linked state */
+#define WIFI_REASOC_STATE 0x00000002
+#define WIFI_SLEEP_STATE 0x00000004
+#define WIFI_STATION_STATE 0x00000008
+
+#define WIFI_AP_STATE 0x00000010
+#define WIFI_ADHOC_STATE 0x00000020
+#define WIFI_ADHOC_MASTER_STATE 0x00000040
+#define WIFI_UNDER_LINKING 0x00000080
+
+#define WIFI_UNDER_WPS 0x00000100
+#define WIFI_STA_ALIVE_CHK_STATE 0x00000400
+#define WIFI_SITE_MONITOR 0x00000800 /* to indicate the station is under site surveying */
+
+#define WIFI_MP_STATE 0x00010000
+#define WIFI_MP_CTX_BACKGROUND 0x00020000 /* in continuous tx background */
+#define WIFI_MP_CTX_ST 0x00040000 /* in continuous tx with single-tone */
+#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 /* pending in continuous tx background due to out of skb */
+#define WIFI_MP_CTX_CCK_HW 0x00100000 /* in continuous tx */
+#define WIFI_MP_CTX_CCK_CS 0x00200000 /* in continuous tx with carrier suppression */
+#define WIFI_MP_LPBK_STATE 0x00400000
+
+#define _FW_UNDER_LINKING WIFI_UNDER_LINKING
+#define _FW_LINKED WIFI_ASOC_STATE
+#define _FW_UNDER_SURVEY WIFI_SITE_MONITOR
+
+enum dot11AuthAlgrthmNum {
+ dot11AuthAlgrthm_Open = 0,
+ dot11AuthAlgrthm_Shared,
+ dot11AuthAlgrthm_8021X,
+ dot11AuthAlgrthm_Auto,
+ dot11AuthAlgrthm_WAPI,
+ dot11AuthAlgrthm_MaxNum
+};
+
+/* Scan type including active and passive scan. */
+enum rt_scan_type {
+ SCAN_PASSIVE,
+ SCAN_ACTIVE,
+ SCAN_MIX,
+};
+
+enum SCAN_RESULT_TYPE {
+ SCAN_RESULT_P2P_ONLY = 0, /* Will return all the P2P devices. */
+ SCAN_RESULT_ALL = 1, /* Will return all the scanned device,
+ * include AP. */
+ SCAN_RESULT_WFD_TYPE = 2 /* Will just return the correct WFD
+ * device. */
+ /* If this device is Miracast sink
+ * device, it will just return all the
+ * Miracast source devices. */
+};
+
+/*
+there are several "locks" in mlme_priv,
+since mlme_priv is a shared resource between many threads,
+like ISR/Call-Back functions, the OID handlers, and even timer functions.
+
+Each _queue has its own locks, already.
+Other items are protected by mlme_priv.lock.
+
+To avoid possible dead lock, any thread trying to modifiying mlme_priv
+SHALL not lock up more than one lock at a time!
+*/
+
+#define traffic_threshold 10
+#define traffic_scan_period 500
+
+struct sitesurvey_ctrl {
+ u64 last_tx_pkts;
+ uint last_rx_pkts;
+ int traffic_busy;
+ struct timer_list sitesurvey_ctrl_timer;
+};
+
+struct rt_link_detect {
+ u32 NumTxOkInPeriod;
+ u32 NumRxOkInPeriod;
+ u32 NumRxUnicastOkInPeriod;
+ bool bBusyTraffic;
+ bool bTxBusyTraffic;
+ bool bRxBusyTraffic;
+ bool bHigherBusyTraffic; /* For interrupt migration purpose. */
+ bool bHigherBusyRxTraffic; /* We may disable Tx interrupt according
+ * to Rx traffic. */
+ bool bHigherBusyTxTraffic; /* We may disable Tx interrupt according
+ * to Tx traffic. */
+};
+
+struct profile_info {
+ u8 ssidlen;
+ u8 ssid[ WLAN_SSID_MAXLEN ];
+ u8 peermac[ ETH_ALEN ];
+};
+
+struct tx_invite_req_info {
+ u8 token;
+ u8 benable;
+ u8 go_ssid[ WLAN_SSID_MAXLEN ];
+ u8 ssidlen;
+ u8 go_bssid[ ETH_ALEN ];
+ u8 peer_macaddr[ ETH_ALEN ];
+ u8 operating_ch; /* This information will be set by using the
+ * p2p_set op_ch=x */
+ u8 peer_ch; /* The listen channel for peer P2P device */
+};
+
+struct tx_invite_resp_info {
+ u8 token; /* Used to record the dialog token of p2p invitation
+ * request frame. */
+};
+
+struct tx_provdisc_req_info {
+ u16 wps_config_method_request; /* Used when sending the
+ * provisioning request frame*/
+ u16 peer_channel_num[2]; /* The channel number which the
+ * receiver stands. */
+ struct ndis_802_11_ssid ssid;
+ u8 peerDevAddr[ETH_ALEN]; /* Peer device address */
+ u8 peerIFAddr[ETH_ALEN]; /* Peer interface address */
+ u8 benable; /* This provision discovery
+ * request frame is trigger
+ * to send or not */
+};
+
+/* When peer device issue prov_disc_req first, we should store the following
+ * information */
+/* The UI must know this information to know which config method the
+ * remote p2p device needs. */
+struct rx_provdisc_req_info {
+ u8 peerDevAddr[ETH_ALEN]; /* Peer device address */
+ u8 strconfig_method_desc_of_prov_disc_req[4]; /* description
+ * for the config method located in the provisioning
+ * discovery request frame. */
+};
+
+struct tx_nego_req_info {
+ u16 peer_channel_num[2]; /* The channel number. */
+ u8 peerDevAddr[ETH_ALEN]; /* Peer device address */
+ u8 benable; /* This negotiation request frame is
+ * trigger to send or not */
+};
+
+struct group_id_info {
+ u8 go_device_addr[ ETH_ALEN ]; /* The GO's device address of
+ * this P2P group */
+ u8 ssid[ WLAN_SSID_MAXLEN ]; /* The SSID of this P2P group */
+};
+
+struct scan_limit_info {
+ u8 scan_op_ch_only; /* When this flag is set, the driver
+ * should only scan the op. channel */
+ u8 operation_ch[2]; /* Store the op. chan of invitation */
+};
+
+struct wifidirect_info {
+ struct adapter *padapter;
+ struct timer_list find_phase_timer;
+ struct timer_list restore_p2p_state_timer;
+
+ /* Used to do the scanning. After confirming the peer is availalble,
+ * the driver transmits the P2P frame to peer. */
+ struct timer_list pre_tx_scan_timer;
+ struct timer_list reset_ch_sitesurvey;
+ struct timer_list reset_ch_sitesurvey2; /* Just for resetting the scan
+ * limit function by using p2p nego */
+ struct tx_provdisc_req_info tx_prov_disc_info;
+ struct rx_provdisc_req_info rx_prov_disc_info;
+ struct tx_invite_req_info invitereq_info;
+ /* Store the profile information of persistent group */
+ struct profile_info profileinfo[P2P_MAX_PERSISTENT_GROUP_NUM];
+ struct tx_invite_resp_info inviteresp_info;
+ struct tx_nego_req_info nego_req_info;
+ /* Store the group id info when doing the group negot handshake. */
+ struct group_id_info groupid_info;
+ /* Used for get the limit scan channel from the Invitation procedure */
+ struct scan_limit_info rx_invitereq_info;
+ /* Used for get the limit scan chan from the P2P negotiation handshake*/
+ struct scan_limit_info p2p_info;
+ enum P2P_ROLE role;
+ enum P2P_STATE pre_p2p_state;
+ enum P2P_STATE p2p_state;
+ /* The device address should be the mac address of this device. */
+ u8 device_addr[ETH_ALEN];
+ u8 interface_addr[ETH_ALEN];
+ u8 social_chan[4];
+ u8 listen_channel;
+ u8 operating_channel;
+ u8 listen_dwell; /* This value should be between 1 and 3 */
+ u8 support_rate[8];
+ u8 p2p_wildcard_ssid[P2P_WILDCARD_SSID_LEN];
+ u8 intent; /* should only include the intent value. */
+ u8 p2p_peer_interface_addr[ETH_ALEN];
+ u8 p2p_peer_device_addr[ETH_ALEN];
+ u8 peer_intent; /* Included the intent value and tie breaker value. */
+ /* Device name for displaying on searching device screen */
+ u8 device_name[WPS_MAX_DEVICE_NAME_LEN];
+ u8 device_name_len;
+ u8 profileindex; /* Used to point to the index of profileinfo array */
+ u8 peer_operating_ch;
+ u8 find_phase_state_exchange_cnt;
+ /* The device password ID for group negotiation */
+ u16 device_password_id_for_nego;
+ u8 negotiation_dialog_token;
+ /* SSID information for group negotitation */
+ u8 nego_ssid[WLAN_SSID_MAXLEN];
+ u8 nego_ssidlen;
+ u8 p2p_group_ssid[WLAN_SSID_MAXLEN];
+ u8 p2p_group_ssid_len;
+ /* Flag to know if the persistent function should be supported or not.*/
+ u8 persistent_supported;
+ /* In the Sigma test, the Sigma will provide this enable from the
+ * sta_set_p2p CAPI. */
+ /* 0: disable */
+ /* 1: enable */
+ u8 session_available; /* Flag to set the WFD session available to
+ * enable or disable "by Sigma" */
+ /* In the Sigma test, the Sigma will disable the session available
+ * by using the sta_preset CAPI. */
+ /* 0: disable */
+ /* 1: enable */
+ u8 wfd_tdls_enable; /* Flag to enable or disable the TDLS by WFD Sigma*/
+ /* 0: disable */
+ /* 1: enable */
+ u8 wfd_tdls_weaksec; /* Flag to enable or disable the weak security
+ * function for TDLS by WFD Sigma */
+ /* 0: disable */
+ /* In this case, the driver can't issue the tdsl
+ * setup request frame. */
+ /* 1: enable */
+ /* In this case, the driver can issue the tdls
+ * setup request frame */
+ /* even the current security is weak security. */
+
+ /* This field will store the WPS value (PIN value or PBC) that UI had
+ * got from the user. */
+ enum P2P_WPSINFO ui_got_wps_info;
+ u16 supported_wps_cm; /* This field describes the WPS config method
+ * which this driver supported. */
+ /* The value should be the combination of config
+ * method defined in page104 of WPS v2.0 spec.*/
+ /* This field will contain the length of body of P2P Channel List
+ * attribute of group negotiation response frame. */
+ uint channel_list_attr_len;
+ /* This field will contain the body of P2P Channel List attribute of
+ * group negotitation response frame. */
+ /* We will use the channel_cnt and channel_list fields when constructing
+ * the group negotiation confirm frame. */
+ u8 channel_list_attr[100];
+ enum P2P_PS_MODE p2p_ps_mode; /* indicate p2p ps mode */
+ enum P2P_PS_STATE p2p_ps_state; /* indicate p2p ps state */
+ u8 noa_index; /* Identifies and instance of Notice of Absence timing. */
+ u8 ctwindow; /* Client traffic window. A period of time in TU after TBTT. */
+ u8 opp_ps; /* opportunistic power save. */
+ u8 noa_num; /* number of NoA descriptor in P2P IE. */
+ u8 noa_count[P2P_MAX_NOA_NUM]; /* Count for owner, Type of client. */
+ /* Max duration for owner, preferred or min acceptable duration for
+ * client. */
+ u32 noa_duration[P2P_MAX_NOA_NUM];
+ /* Length of interval for owner, preferred or max acceptable interval
+ * of client. */
+ u32 noa_interval[P2P_MAX_NOA_NUM];
+ /* schedule expressed in terms of the lower 4 bytes of the TSF timer. */
+ u32 noa_start_time[P2P_MAX_NOA_NUM];
+};
+
+struct tdls_ss_record { /* signal strength record */
+ u8 macaddr[ETH_ALEN];
+ u8 RxPWDBAll;
+ u8 is_tdls_sta; /* true: direct link sta, false: else */
+};
+
+struct tdls_info {
+ u8 ap_prohibited;
+ uint setup_state;
+ u8 sta_cnt;
+ u8 sta_maximum; /* 1:tdls sta is equal (NUM_STA-1), reach max direct link number; 0: else; */
+ struct tdls_ss_record ss_record;
+ u8 macid_index; /* macid entry that is ready to write */
+ u8 clear_cam; /* cam entry that is trying to clear, using it in direct link teardown */
+ u8 ch_sensing;
+ u8 cur_channel;
+ u8 candidate_ch;
+ u8 collect_pkt_num[MAX_CHANNEL_NUM];
+ spinlock_t cmd_lock;
+ spinlock_t hdl_lock;
+ u8 watchdog_count;
+ u8 dev_discovered; /* WFD_TDLS: for sigma test */
+ u8 enable;
+};
+
+struct mlme_priv {
+ spinlock_t lock;
+ int fw_state; /* shall we protect this variable? maybe not necessarily... */
+ u8 bScanInProcess;
+ u8 to_join; /* flag */
+ u8 to_roaming; /* roaming trying times */
+
+ u8 *nic_hdl;
+
+ u8 not_indic_disco;
+ struct list_head *pscanned;
+ struct __queue free_bss_pool;
+ struct __queue scanned_queue;
+ u8 *free_bss_buf;
+ u8 key_mask; /* use to restore wep key after hal_init */
+ u32 num_of_scanned;
+
+ struct ndis_802_11_ssid assoc_ssid;
+ u8 assoc_bssid[6];
+
+ struct wlan_network cur_network;
+ struct wlan_network *cur_network_scanned;
+
+ u32 scan_interval;
+
+ struct timer_list assoc_timer;
+
+ uint assoc_by_bssid;
+ uint assoc_by_rssi;
+
+ struct timer_list scan_to_timer; /* driver itself handles scan_timeout status. */
+ u32 scan_start_time; /* used to evaluate the time spent in scanning */
+
+ struct qos_priv qospriv;
+
+ /* Number of non-HT AP/stations */
+ int num_sta_no_ht;
+
+ /* Number of HT AP/stations 20 MHz */
+ /* int num_sta_ht_20mhz; */
+
+ int num_FortyMHzIntolerant;
+ struct ht_priv htpriv;
+ struct rt_link_detect LinkDetectInfo;
+ struct timer_list dynamic_chk_timer; /* dynamic/periodic check timer */
+
+ u8 acm_mask; /* for wmm acm mask */
+ u8 ChannelPlan;
+ enum rt_scan_type scan_mode; /* active: 1, passive: 0 */
+
+ /* u8 probereq_wpsie[MAX_WPS_IE_LEN];added in probe req */
+ /* int probereq_wpsie_len; */
+ u8 *wps_probe_req_ie;
+ u32 wps_probe_req_ie_len;
+
+ u8 *assoc_req;
+ u32 assoc_req_len;
+ u8 *assoc_rsp;
+ u32 assoc_rsp_len;
+
+#if defined (CONFIG_88EU_AP_MODE)
+ /* Number of associated Non-ERP stations (i.e., stations using 802.11b
+ * in 802.11g BSS) */
+ int num_sta_non_erp;
+
+ /* Number of associated stations that do not support Short Slot Time */
+ int num_sta_no_short_slot_time;
+
+ /* Number of associated stations that do not support Short Preamble */
+ int num_sta_no_short_preamble;
+
+ int olbc; /* Overlapping Legacy BSS Condition */
+
+ /* Number of HT assoc sta that do not support greenfield */
+ int num_sta_ht_no_gf;
+
+ /* Number of associated non-HT stations */
+ /* int num_sta_no_ht; */
+
+ /* Number of HT associated stations 20 MHz */
+ int num_sta_ht_20mhz;
+
+ /* Overlapping BSS information */
+ int olbc_ht;
+
+ u16 ht_op_mode;
+
+ u8 *wps_beacon_ie;
+ /* u8 *wps_probe_req_ie; */
+ u8 *wps_probe_resp_ie;
+ u8 *wps_assoc_resp_ie;
+
+ u32 wps_beacon_ie_len;
+ u32 wps_probe_resp_ie_len;
+ u32 wps_assoc_resp_ie_len;
+
+ u8 *p2p_beacon_ie;
+ u8 *p2p_probe_req_ie;
+ u8 *p2p_probe_resp_ie;
+ u8 *p2p_go_probe_resp_ie; /* for GO */
+ u8 *p2p_assoc_req_ie;
+
+ u32 p2p_beacon_ie_len;
+ u32 p2p_probe_req_ie_len;
+ u32 p2p_probe_resp_ie_len;
+ u32 p2p_go_probe_resp_ie_len; /* for GO */
+ u32 p2p_assoc_req_ie_len;
+ spinlock_t bcn_update_lock;
+ u8 update_bcn;
+#endif /* if defined (CONFIG_88EU_AP_MODE) */
+};
+
+#ifdef CONFIG_88EU_AP_MODE
+
+struct hostapd_priv {
+ struct adapter *padapter;
+};
+
+int hostapd_mode_init(struct adapter *padapter);
+void hostapd_mode_unload(struct adapter *padapter);
+#endif
+
+extern unsigned char WPA_TKIP_CIPHER[4];
+extern unsigned char RSN_TKIP_CIPHER[4];
+extern unsigned char REALTEK_96B_IE[];
+extern unsigned char MCS_rate_2R[16];
+extern unsigned char MCS_rate_1R[16];
+
+void rtw_joinbss_event_prehandle(struct adapter *adapter, u8 *pbuf);
+void rtw_survey_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_surveydone_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_joinbss_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_stassoc_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_stadel_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_atimdone_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_cpwm_event_callback(struct adapter *adapter, u8 *pbuf);
+void indicate_wx_scan_complete_event(struct adapter *padapter);
+void rtw_indicate_wx_assoc_event(struct adapter *padapter);
+void rtw_indicate_wx_disassoc_event(struct adapter *padapter);
+int event_thread(void *context);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
+void rtw_join_timeout_handler (void *FunctionContext);
+void _rtw_scan_timeout_handler(void *FunctionContext);
+#else
+void rtw_join_timeout_handler (struct timer_list *t);
+void _rtw_scan_timeout_handler (struct timer_list *t);
+#endif
+void rtw_free_network_queue(struct adapter *adapter, u8 isfreeall);
+int rtw_init_mlme_priv(struct adapter *adapter);
+void rtw_free_mlme_priv (struct mlme_priv *pmlmepriv);
+int rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv);
+int rtw_set_key(struct adapter *adapter, struct security_priv *psecuritypriv,
+ int keyid, u8 set_tx);
+int rtw_set_auth(struct adapter *adapter, struct security_priv *psecuritypriv);
+
+static inline u8 *get_bssid(struct mlme_priv *pmlmepriv)
+{ /* if sta_mode:pmlmepriv->cur_network.network.MacAddress=> bssid */
+ /* if adhoc_mode:pmlmepriv->cur_network.network.MacAddress=> ibss mac address */
+ return pmlmepriv->cur_network.network.MacAddress;
+}
+
+static inline int check_fwstate(struct mlme_priv *pmlmepriv, int state)
+{
+ if (pmlmepriv->fw_state & state)
+ return true;
+
+ return false;
+}
+
+static inline int get_fwstate(struct mlme_priv *pmlmepriv)
+{
+ return pmlmepriv->fw_state;
+}
+
+/*
+ * No Limit on the calling context,
+ * therefore set it to be the critical section...
+ *
+ * ### NOTE:#### (!!!!)
+ * MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock
+ */
+static inline void set_fwstate(struct mlme_priv *pmlmepriv, int state)
+{
+ pmlmepriv->fw_state |= state;
+ /* FOR HW integration */
+ if (_FW_UNDER_SURVEY==state)
+ pmlmepriv->bScanInProcess = true;
+}
+
+static inline void _clr_fwstate_(struct mlme_priv *pmlmepriv, int state)
+{
+ pmlmepriv->fw_state &= ~state;
+ /* FOR HW integration */
+ if (_FW_UNDER_SURVEY==state)
+ pmlmepriv->bScanInProcess = false;
+}
+
+/*
+ * No Limit on the calling context,
+ * therefore set it to be the critical section...
+ */
+static inline void clr_fwstate(struct mlme_priv *pmlmepriv, int state)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ if (check_fwstate(pmlmepriv, state) == true)
+ pmlmepriv->fw_state ^= state;
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+static inline void clr_fwstate_ex(struct mlme_priv *pmlmepriv, int state)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ _clr_fwstate_(pmlmepriv, state);
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+static inline void up_scanned_network(struct mlme_priv *pmlmepriv)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ pmlmepriv->num_of_scanned++;
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+static inline void down_scanned_network(struct mlme_priv *pmlmepriv)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ pmlmepriv->num_of_scanned--;
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+static inline void set_scanned_network_val(struct mlme_priv *pmlmepriv, int val)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ pmlmepriv->num_of_scanned = val;
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+u16 rtw_get_capability(struct wlan_bssid_ex *bss);
+void rtw_update_scanned_network(struct adapter *adapter,
+ struct wlan_bssid_ex *target);
+void rtw_disconnect_hdl_under_linked(struct adapter *adapter,
+ struct sta_info *psta, u8 free_assoc);
+void rtw_generate_random_ibss(u8 *pibss);
+struct wlan_network *rtw_find_network(struct __queue *scanned_queue, u8 *addr);
+struct wlan_network *rtw_get_oldest_wlan_network(struct __queue *scanned_queue);
+
+void rtw_free_assoc_resources(struct adapter *adapter, int lock_scanned_queue);
+void rtw_indicate_disconnect(struct adapter *adapter);
+void rtw_indicate_connect(struct adapter *adapter);
+void rtw_indicate_scan_done( struct adapter *padapter, bool aborted);
+void rtw_scan_abort(struct adapter *adapter);
+
+int rtw_restruct_sec_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
+ uint in_len);
+int rtw_restruct_wmm_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
+ uint in_len, uint initial_out_len);
+void rtw_init_registrypriv_dev_network(struct adapter *adapter);
+
+void rtw_update_registrypriv_dev_network(struct adapter *adapter);
+
+void rtw_get_encrypt_decrypt_from_registrypriv(struct adapter *adapter);
+
+void _rtw_join_timeout_handler(struct adapter *adapter);
+void rtw_scan_timeout_handler(struct adapter *adapter);
+
+ void rtw_dynamic_check_timer_handlder(struct adapter *adapter);
+#define rtw_is_scan_deny(adapter) false
+#define rtw_clear_scan_deny(adapter) do {} while (0)
+#define rtw_set_scan_deny_timer_hdl(adapter) do {} while (0)
+#define rtw_set_scan_deny(adapter, ms) do {} while (0)
+
+int _rtw_init_mlme_priv(struct adapter *padapter);
+
+void rtw_free_mlme_priv_ie_data(struct mlme_priv *pmlmepriv);
+
+void _rtw_free_mlme_priv(struct mlme_priv *pmlmepriv);
+
+int _rtw_enqueue_network(struct __queue *queue, struct wlan_network *pnetwork);
+
+struct wlan_network *_rtw_dequeue_network(struct __queue *queue);
+
+ struct wlan_network *_rtw_alloc_network(struct mlme_priv *pmlmepriv);
+
+void _rtw_free_network(struct mlme_priv *pmlmepriv,
+ struct wlan_network *pnetwork, u8 isfreeall);
+void _rtw_free_network_nolock(struct mlme_priv *pmlmepriv,
+ struct wlan_network *pnetwork);
+
+struct wlan_network* _rtw_find_network(struct __queue *scanned_queue, u8 *addr);
+
+void _rtw_free_network_queue(struct adapter *padapter, u8 isfreeall);
+
+int rtw_if_up(struct adapter *padapter);
+
+u8 *rtw_get_capability_from_ie(u8 *ie);
+u8 *rtw_get_timestampe_from_ie(u8 *ie);
+u8 *rtw_get_beacon_interval_from_ie(u8 *ie);
+
+void rtw_joinbss_reset(struct adapter *padapter);
+
+unsigned int rtw_restructure_ht_ie(struct adapter *padapter, u8 *in_ie,
+ u8 *out_ie, uint in_len, uint *pout_len);
+void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len);
+void rtw_issue_addbareq_cmd(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+
+int rtw_is_same_ibss(struct adapter *adapter, struct wlan_network *pnetwork);
+int is_same_network(struct wlan_bssid_ex *src, struct wlan_bssid_ex *dst);
+
+void rtw_roaming(struct adapter *padapter, struct wlan_network *tgt_network);
+void _rtw_roaming(struct adapter *padapter, struct wlan_network *tgt_network);
+void rtw_set_roaming(struct adapter *adapter, u8 to_roaming);
+u8 rtw_to_roaming(struct adapter *adapter);
+
+void rtw_sta_media_status_rpt(struct adapter *adapter, struct sta_info *psta,
+ u32 mstatus);
+
+#endif /* __RTL871X_MLME_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_mlme_ext.h b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
new file mode 100644
index 000000000000..fdb79587762e
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
@@ -0,0 +1,874 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_MLME_EXT_H_
+#define __RTW_MLME_EXT_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <wlan_bssdef.h>
+
+/* Commented by Albert 20101105 */
+/* Increase the SURVEY_TO value from 100 to 150 ( 100ms to 150ms ) */
+/* The Realtek 8188CE SoftAP will spend around 100ms to send the probe response after receiving the probe request. */
+/* So, this driver tried to extend the dwell time for each scanning channel. */
+/* This will increase the chance to receive the probe response from SoftAP. */
+
+#define SURVEY_TO (100)
+#define REAUTH_TO (300) /* 50) */
+#define REASSOC_TO (300) /* 50) */
+/* define DISCONNECT_TO (3000) */
+#define ADDBA_TO (2000)
+
+#define LINKED_TO (1) /* unit:2 sec, 1x2=2 sec */
+
+#define REAUTH_LIMIT (4)
+#define REASSOC_LIMIT (4)
+#define READDBA_LIMIT (2)
+
+#define ROAMING_LIMIT 8
+
+#define DYNAMIC_FUNC_DISABLE (0x0)
+
+/* ====== ODM_ABILITY_E ======== */
+/* BB ODM section BIT 0-15 */
+#define DYNAMIC_BB_DIG BIT(0)
+#define DYNAMIC_BB_RA_MASK BIT(1)
+#define DYNAMIC_BB_DYNAMIC_TXPWR BIT(2)
+#define DYNAMIC_BB_BB_FA_CNT BIT(3)
+
+#define DYNAMIC_BB_RSSI_MONITOR BIT(4)
+#define DYNAMIC_BB_CCK_PD BIT(5)
+#define DYNAMIC_BB_ANT_DIV BIT(6)
+#define DYNAMIC_BB_PWR_SAVE BIT(7)
+#define DYNAMIC_BB_PWR_TRA BIT(8)
+#define DYNAMIC_BB_RATE_ADAPTIVE BIT(9)
+#define DYNAMIC_BB_PATH_DIV BIT(10)
+#define DYNAMIC_BB_PSD BIT(11)
+
+/* MAC DM section BIT 16-23 */
+#define DYNAMIC_MAC_EDCA_TURBO BIT(16)
+#define DYNAMIC_MAC_EARLY_MODE BIT(17)
+
+/* RF ODM section BIT 24-31 */
+#define DYNAMIC_RF_TX_PWR_TRACK BIT(24)
+#define DYNAMIC_RF_RX_GAIN_TRACK BIT(25)
+#define DYNAMIC_RF_CALIBRATION BIT(26)
+
+#define DYNAMIC_ALL_FUNC_ENABLE 0xFFFFFFF
+
+#define _HW_STATE_NOLINK_ 0x00
+#define _HW_STATE_ADHOC_ 0x01
+#define _HW_STATE_STATION_ 0x02
+#define _HW_STATE_AP_ 0x03
+
+#define _1M_RATE_ 0
+#define _2M_RATE_ 1
+#define _5M_RATE_ 2
+#define _11M_RATE_ 3
+#define _6M_RATE_ 4
+#define _9M_RATE_ 5
+#define _12M_RATE_ 6
+#define _18M_RATE_ 7
+#define _24M_RATE_ 8
+#define _36M_RATE_ 9
+#define _48M_RATE_ 10
+#define _54M_RATE_ 11
+
+extern unsigned char RTW_WPA_OUI[];
+extern unsigned char WMM_OUI[];
+extern unsigned char WPS_OUI[];
+extern unsigned char WFD_OUI[];
+extern unsigned char P2P_OUI[];
+
+extern unsigned char WMM_INFO_OUI[];
+extern unsigned char WMM_PARA_OUI[];
+
+/* Channel Plan Type. */
+/* Note: */
+/* We just add new channel plan when the new channel plan is different
+ * from any of the following channel plan. */
+/* If you just want to customize the actions(scan period or join actions)
+ * about one of the channel plan, */
+/* customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */
+enum RT_CHANNEL_DOMAIN {
+ /* old channel plan mapping ===== */
+ RT_CHANNEL_DOMAIN_FCC = 0x00,
+ RT_CHANNEL_DOMAIN_IC = 0x01,
+ RT_CHANNEL_DOMAIN_ETSI = 0x02,
+ RT_CHANNEL_DOMAIN_SPAIN = 0x03,
+ RT_CHANNEL_DOMAIN_FRANCE = 0x04,
+ RT_CHANNEL_DOMAIN_MKK = 0x05,
+ RT_CHANNEL_DOMAIN_MKK1 = 0x06,
+ RT_CHANNEL_DOMAIN_ISRAEL = 0x07,
+ RT_CHANNEL_DOMAIN_TELEC = 0x08,
+ RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 0x09,
+ RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 0x0A,
+ RT_CHANNEL_DOMAIN_TAIWAN = 0x0B,
+ RT_CHANNEL_DOMAIN_CHINA = 0x0C,
+ RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO = 0x0D,
+ RT_CHANNEL_DOMAIN_KOREA = 0x0E,
+ RT_CHANNEL_DOMAIN_TURKEY = 0x0F,
+ RT_CHANNEL_DOMAIN_JAPAN = 0x10,
+ RT_CHANNEL_DOMAIN_FCC_NO_DFS = 0x11,
+ RT_CHANNEL_DOMAIN_JAPAN_NO_DFS = 0x12,
+ RT_CHANNEL_DOMAIN_WORLD_WIDE_5G = 0x13,
+ RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS = 0x14,
+
+ /* new channel plan mapping, (2GDOMAIN_5GDOMAIN) ===== */
+ RT_CHANNEL_DOMAIN_WORLD_NULL = 0x20,
+ RT_CHANNEL_DOMAIN_ETSI1_NULL = 0x21,
+ RT_CHANNEL_DOMAIN_FCC1_NULL = 0x22,
+ RT_CHANNEL_DOMAIN_MKK1_NULL = 0x23,
+ RT_CHANNEL_DOMAIN_ETSI2_NULL = 0x24,
+ RT_CHANNEL_DOMAIN_FCC1_FCC1 = 0x25,
+ RT_CHANNEL_DOMAIN_WORLD_ETSI1 = 0x26,
+ RT_CHANNEL_DOMAIN_MKK1_MKK1 = 0x27,
+ RT_CHANNEL_DOMAIN_WORLD_KCC1 = 0x28,
+ RT_CHANNEL_DOMAIN_WORLD_FCC2 = 0x29,
+ RT_CHANNEL_DOMAIN_WORLD_FCC3 = 0x30,
+ RT_CHANNEL_DOMAIN_WORLD_FCC4 = 0x31,
+ RT_CHANNEL_DOMAIN_WORLD_FCC5 = 0x32,
+ RT_CHANNEL_DOMAIN_WORLD_FCC6 = 0x33,
+ RT_CHANNEL_DOMAIN_FCC1_FCC7 = 0x34,
+ RT_CHANNEL_DOMAIN_WORLD_ETSI2 = 0x35,
+ RT_CHANNEL_DOMAIN_WORLD_ETSI3 = 0x36,
+ RT_CHANNEL_DOMAIN_MKK1_MKK2 = 0x37,
+ RT_CHANNEL_DOMAIN_MKK1_MKK3 = 0x38,
+ RT_CHANNEL_DOMAIN_FCC1_NCC1 = 0x39,
+ RT_CHANNEL_DOMAIN_FCC1_NCC2 = 0x40,
+ RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G = 0x41,
+ /* Add new channel plan above this line=============== */
+ RT_CHANNEL_DOMAIN_MAX,
+ RT_CHANNEL_DOMAIN_REALTEK_DEFINE = 0x7F,
+};
+
+enum RT_CHANNEL_DOMAIN_2G {
+ RT_CHANNEL_DOMAIN_2G_WORLD = 0x00, /* Worldwide 13 */
+ RT_CHANNEL_DOMAIN_2G_ETSI1 = 0x01, /* Europe */
+ RT_CHANNEL_DOMAIN_2G_FCC1 = 0x02, /* US */
+ RT_CHANNEL_DOMAIN_2G_MKK1 = 0x03, /* Japan */
+ RT_CHANNEL_DOMAIN_2G_ETSI2 = 0x04, /* France */
+ RT_CHANNEL_DOMAIN_2G_NULL = 0x05,
+ /* Add new channel plan above this line=============== */
+ RT_CHANNEL_DOMAIN_2G_MAX,
+};
+
+#define rtw_is_channel_plan_valid(chplan) \
+ (chplan < RT_CHANNEL_DOMAIN_MAX || \
+ chplan == RT_CHANNEL_DOMAIN_REALTEK_DEFINE)
+
+struct rt_channel_plan {
+ unsigned char Channel[MAX_CHANNEL_NUM];
+ unsigned char Len;
+};
+
+struct rt_channel_plan_2g {
+ unsigned char Channel[MAX_CHANNEL_NUM_2G];
+ unsigned char Len;
+};
+
+struct rt_channel_plan_map {
+ unsigned char Index2G;
+};
+
+enum Associated_AP {
+ atherosAP = 0,
+ broadcomAP = 1,
+ ciscoAP = 2,
+ marvellAP = 3,
+ ralinkAP = 4,
+ realtekAP = 5,
+ airgocapAP = 6,
+ unknownAP = 7,
+ maxAP,
+};
+
+enum HT_IOT_PEER {
+ HT_IOT_PEER_UNKNOWN = 0,
+ HT_IOT_PEER_REALTEK = 1,
+ HT_IOT_PEER_REALTEK_92SE = 2,
+ HT_IOT_PEER_BROADCOM = 3,
+ HT_IOT_PEER_RALINK = 4,
+ HT_IOT_PEER_ATHEROS = 5,
+ HT_IOT_PEER_CISCO = 6,
+ HT_IOT_PEER_MERU = 7,
+ HT_IOT_PEER_MARVELL = 8,
+ HT_IOT_PEER_REALTEK_SOFTAP = 9,/* peer is RealTek SOFT_AP */
+ HT_IOT_PEER_SELF_SOFTAP = 10, /* Self is SoftAP */
+ HT_IOT_PEER_AIRGO = 11,
+ HT_IOT_PEER_INTEL = 12,
+ HT_IOT_PEER_RTK_APCLIENT = 13,
+ HT_IOT_PEER_REALTEK_81XX = 14,
+ HT_IOT_PEER_REALTEK_WOW = 15,
+ HT_IOT_PEER_TENDA = 16,
+ HT_IOT_PEER_MAX = 17
+};
+
+enum SCAN_STATE {
+ SCAN_DISABLE = 0,
+ SCAN_START = 1,
+ SCAN_TXNULL = 2,
+ SCAN_PROCESS = 3,
+ SCAN_COMPLETE = 4,
+ SCAN_STATE_MAX,
+};
+
+struct mlme_handler {
+ unsigned int num;
+ char *str;
+ unsigned int (*func)(struct adapter *adapt, struct recv_frame *frame);
+};
+
+struct action_handler {
+ unsigned int num;
+ char* str;
+ unsigned int (*func)(struct adapter *adapt, struct recv_frame *frame);
+};
+
+struct ss_res {
+ int state;
+ int bss_cnt;
+ int channel_idx;
+ int scan_mode;
+ u8 ssid_num;
+ u8 ch_num;
+ struct ndis_802_11_ssid ssid[RTW_SSID_SCAN_AMOUNT];
+ struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
+};
+
+/* define AP_MODE 0x0C */
+/* define STATION_MODE 0x08 */
+/* define AD_HOC_MODE 0x04 */
+/* define NO_LINK_MODE 0x00 */
+
+#define WIFI_FW_NULL_STATE _HW_STATE_NOLINK_
+#define WIFI_FW_STATION_STATE _HW_STATE_STATION_
+#define WIFI_FW_AP_STATE _HW_STATE_AP_
+#define WIFI_FW_ADHOC_STATE _HW_STATE_ADHOC_
+
+#define WIFI_FW_AUTH_NULL 0x00000100
+#define WIFI_FW_AUTH_STATE 0x00000200
+#define WIFI_FW_AUTH_SUCCESS 0x00000400
+
+#define WIFI_FW_ASSOC_STATE 0x00002000
+#define WIFI_FW_ASSOC_SUCCESS 0x00004000
+
+#define WIFI_FW_LINKING_STATE (WIFI_FW_AUTH_NULL | \
+ WIFI_FW_AUTH_STATE | \
+ WIFI_FW_AUTH_SUCCESS | \
+ WIFI_FW_ASSOC_STATE)
+
+struct FW_Sta_Info {
+ struct sta_info *psta;
+ u32 status;
+ u32 rx_pkt;
+ u32 retry;
+ unsigned char SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
+};
+
+/*
+ * Usage:
+ * When one iface acted as AP mode and the other iface is STA mode and scanning,
+ * it should switch back to AP's operating channel periodically.
+ * Parameters info:
+ * When the driver scanned RTW_SCAN_NUM_OF_CH channels, it would switch back to
+ * AP's operating channel for
+ * RTW_STAY_AP_CH_MILLISECOND * SURVEY_TO milliseconds.
+ * Example:
+ * For chip supports 2.4G + 5GHz and AP mode is operating in channel 1,
+ * RTW_SCAN_NUM_OF_CH is 8, RTW_STAY_AP_CH_MS is 3 and SURVEY_TO is 100.
+ * When it's STA mode gets set_scan command,
+ * it would
+ * 1. Doing the scan on channel 1.2.3.4.5.6.7.8
+ * 2. Back to channel 1 for 300 milliseconds
+ * 3. Go through doing site survey on channel 9.10.11.36.40.44.48.52
+ * 4. Back to channel 1 for 300 milliseconds
+ * 5. ... and so on, till survey done.
+ */
+
+struct mlme_ext_info {
+ u32 state;
+ u32 reauth_count;
+ u32 reassoc_count;
+ u32 link_count;
+ u32 auth_seq;
+ u32 auth_algo; /* 802.11 auth, could be open, shared, auto */
+ u32 authModeToggle;
+ u32 enc_algo;/* encrypt algorithm; */
+ u32 key_index; /* this is only valid for legacy wep,
+ * 0~3 for key id. */
+ u32 iv;
+ u8 chg_txt[128];
+ u16 aid;
+ u16 bcn_interval;
+ u16 capability;
+ u8 assoc_AP_vendor;
+ u8 slotTime;
+ u8 preamble_mode;
+ u8 WMM_enable;
+ u8 ERP_enable;
+ u8 ERP_IE;
+ u8 HT_enable;
+ u8 HT_caps_enable;
+ u8 HT_info_enable;
+ u8 HT_protection;
+ u8 turboMode_cts2self;
+ u8 turboMode_rtsen;
+ u8 SM_PS;
+ u8 agg_enable_bitmap;
+ u8 ADDBA_retry_count;
+ u8 candidate_tid_bitmap;
+ u8 dialogToken;
+ /* Accept ADDBA Request */
+ bool bAcceptAddbaReq;
+ u8 bwmode_updated;
+ u8 hidden_ssid_mode;
+
+ struct ADDBA_request ADDBA_req;
+ struct WMM_para_element WMM_param;
+ struct HT_caps_element HT_caps;
+ struct HT_info_element HT_info;
+ struct wlan_bssid_ex network;/* join network or bss_network,
+ * if in ap mode, it is the same
+ * as cur_network.network */
+ struct FW_Sta_Info FW_sta_info[NUM_STA];
+};
+
+/* The channel information about this channel including joining,
+ * scanning, and power constraints. */
+struct rt_channel_info {
+ u8 ChannelNum; /* The channel number. */
+ enum rt_scan_type ScanType; /* Scan type such as passive
+ * or active scan. */
+ u32 rx_count;
+};
+
+int rtw_ch_set_search_ch(struct rt_channel_info *ch_set, const u32 ch);
+
+/* P2P_MAX_REG_CLASSES - Maximum number of regulatory classes */
+#define P2P_MAX_REG_CLASSES 10
+
+/* P2P_MAX_REG_CLASS_CHANNELS - Maximum number of chan per regulatory class */
+#define P2P_MAX_REG_CLASS_CHANNELS 20
+
+/* struct p2p_channels - List of supported channels */
+struct p2p_channels {
+ /* struct p2p_reg_class - Supported regulatory class */
+ struct p2p_reg_class {
+ /* reg_class - Regulatory class (IEEE 802.11-2007, Annex J) */
+ u8 reg_class;
+
+ /* channel - Supported channels */
+ u8 channel[P2P_MAX_REG_CLASS_CHANNELS];
+
+ /* channels - Number of channel entries in use */
+ size_t channels;
+ } reg_class[P2P_MAX_REG_CLASSES];
+
+ /* reg_classes - Number of reg_class entries in use */
+ size_t reg_classes;
+};
+
+struct p2p_oper_class_map {
+ enum hw_mode {IEEE80211G} mode;
+ u8 op_class;
+ u8 min_chan;
+ u8 max_chan;
+ u8 inc;
+ enum {BW20, BW40PLUS, BW40MINUS} bw;
+};
+
+struct mlme_ext_priv {
+ struct adapter *padapter;
+ u8 mlmeext_init;
+ ATOMIC_T event_seq;
+ u16 mgnt_seq;
+
+ unsigned char cur_channel;
+ unsigned char cur_bwmode;
+ unsigned char cur_ch_offset;/* PRIME_CHNL_OFFSET */
+ unsigned char cur_wireless_mode; /* NETWORK_TYPE */
+
+ unsigned char oper_channel; /* saved chan info when call
+ * set_channel_bw */
+ unsigned char oper_bwmode;
+ unsigned char oper_ch_offset;/* PRIME_CHNL_OFFSET */
+
+ unsigned char max_chan_nums;
+ struct rt_channel_info channel_set[MAX_CHANNEL_NUM];
+ struct p2p_channels channel_list;
+ unsigned char basicrate[NumRates];
+ unsigned char datarate[NumRates];
+
+ struct ss_res sitesurvey_res;
+ struct mlme_ext_info mlmext_info;/* for sta/adhoc mode, including
+ * current scan/connecting/connected
+ * related info. For ap mode,
+ * network includes ap's cap_info*/
+ struct timer_list survey_timer;
+ struct timer_list link_timer;
+ u16 chan_scan_time;
+
+ u8 scan_abort;
+ u8 tx_rate; /* TXRATE when USERATE is set. */
+
+ u32 retry; /* retry for issue probereq */
+
+ u64 TSFValue;
+
+#ifdef CONFIG_88EU_AP_MODE
+ unsigned char bstart_bss;
+#endif
+ u8 update_channel_plan_by_ap_done;
+ /* recv_decache check for Action_public frame */
+ u8 action_public_dialog_token;
+ u16 action_public_rxseq;
+ u8 active_keep_alive_check;
+};
+
+int init_mlme_ext_priv(struct adapter *adapter);
+int init_hw_mlme_ext(struct adapter *padapter);
+void free_mlme_ext_priv (struct mlme_ext_priv *pmlmeext);
+extern void init_mlme_ext_timer(struct adapter *padapter);
+extern void init_addba_retry_timer(struct adapter *adapt, struct sta_info *sta);
+extern struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv);
+
+unsigned char networktype_to_raid(unsigned char network_type);
+u8 judge_network_type(struct adapter *padapter, unsigned char *rate, int len);
+void get_rate_set(struct adapter *padapter, unsigned char *pbssrate, int *len);
+void UpdateBrateTbl(struct adapter *padapter, u8 *mBratesOS);
+void UpdateBrateTblForSoftAP(u8 *bssrateset, u32 bssratelen);
+
+void Save_DM_Func_Flag(struct adapter *padapter);
+void Restore_DM_Func_Flag(struct adapter *padapter);
+void Switch_DM_Func(struct adapter *padapter, u32 mode, u8 enable);
+
+void Set_MSR(struct adapter *padapter, u8 type);
+
+u8 rtw_get_oper_ch(struct adapter *adapter);
+void rtw_set_oper_ch(struct adapter *adapter, u8 ch);
+u8 rtw_get_oper_bw(struct adapter *adapter);
+void rtw_set_oper_bw(struct adapter *adapter, u8 bw);
+u8 rtw_get_oper_choffset(struct adapter *adapter);
+void rtw_set_oper_choffset(struct adapter *adapter, u8 offset);
+
+void set_channel_bwmode(struct adapter *padapter, unsigned char channel,
+ unsigned char channel_offset, unsigned short bwmode);
+void SelectChannel(struct adapter *padapter, unsigned char channel);
+void SetBWMode(struct adapter *padapter, unsigned short bwmode,
+ unsigned char channel_offset);
+
+unsigned int decide_wait_for_beacon_timeout(unsigned int bcn_interval);
+
+void write_cam(struct adapter *padapter, u8 entry, u16 ctrl, u8 *mac, u8 *key);
+void clear_cam_entry(struct adapter *padapter, u8 entry);
+
+void invalidate_cam_all(struct adapter *padapter);
+void CAM_empty_entry(struct adapter * Adapter, u8 ucIndex);
+
+int allocate_fw_sta_entry(struct adapter *padapter);
+void flush_all_cam_entry(struct adapter *padapter);
+
+void site_survey(struct adapter *padapter);
+u8 collect_bss_info(struct adapter *padapter, struct recv_frame *precv_frame,
+ struct wlan_bssid_ex *bssid);
+void update_network(struct wlan_bssid_ex *dst, struct wlan_bssid_ex *src,
+ struct adapter *adapter, bool update_ie);
+
+int get_bsstype(unsigned short capability);
+u8 *get_my_bssid(struct wlan_bssid_ex *pnetwork);
+u16 get_beacon_interval(struct wlan_bssid_ex *bss);
+
+int is_client_associated_to_ap(struct adapter *padapter);
+int is_client_associated_to_ibss(struct adapter *padapter);
+int is_IBSS_empty(struct adapter *padapter);
+
+unsigned char check_assoc_AP(u8 *pframe, uint len);
+
+int WMM_param_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
+void WMMOnAssocRsp(struct adapter *padapter);
+
+void HT_caps_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
+void HT_info_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
+void HTOnAssocRsp(struct adapter *padapter);
+
+void ERP_IE_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
+void VCS_update(struct adapter *padapter, struct sta_info *psta);
+
+void update_beacon_info(struct adapter *padapter, u8 *pframe, uint len,
+ struct sta_info *psta);
+int rtw_check_bcn_info(struct adapter *Adapter, u8 *pframe, u32 packet_len);
+void update_IOT_info(struct adapter *padapter);
+void update_capinfo(struct adapter *adapter, u16 updatecap);
+void update_wireless_mode(struct adapter *padapter);
+void update_tx_basic_rate(struct adapter *padapter, u8 modulation);
+void update_bmc_sta_support_rate(struct adapter *padapter, u32 mac_id);
+int update_sta_support_rate(struct adapter *padapter, u8 *pvar_ie,
+ uint var_ie_len, int cam_idx);
+
+/* for sta/adhoc mode */
+void update_sta_info(struct adapter *padapter, struct sta_info *psta);
+unsigned int update_basic_rate(unsigned char *ptn, unsigned int ptn_sz);
+unsigned int update_supported_rate(unsigned char *ptn, unsigned int ptn_sz);
+unsigned int update_MSC_rate(struct HT_caps_element *pHT_caps);
+void Update_RA_Entry(struct adapter *padapter, u32 mac_id);
+void set_sta_rate(struct adapter *padapter, struct sta_info *psta);
+
+unsigned int receive_disconnect(struct adapter *padapter,
+ unsigned char *macaddr, unsigned short reason);
+
+unsigned char get_highest_rate_idx(u32 mask);
+int support_short_GI(struct adapter *padapter, struct HT_caps_element *caps);
+unsigned int is_ap_in_tkip(struct adapter *padapter);
+unsigned int is_ap_in_wep(struct adapter *padapter);
+unsigned int should_forbid_n_rate(struct adapter *padapter);
+
+void report_join_res(struct adapter *padapter, int res);
+void report_survey_event(struct adapter *padapter, struct recv_frame *precv_frame);
+void report_surveydone_event(struct adapter *padapter);
+void report_del_sta_event(struct adapter *padapter,
+ unsigned char *addr, unsigned short reason);
+void report_add_sta_event(struct adapter *padapter, unsigned char* addr,
+ int cam_idx);
+
+void beacon_timing_control(struct adapter *padapter);
+extern u8 set_tx_beacon_cmd(struct adapter*padapter);
+unsigned int setup_beacon_frame(struct adapter *padapter,
+ unsigned char *beacon_frame);
+void update_mgnt_tx_rate(struct adapter *padapter, u8 rate);
+void update_mgntframe_attrib(struct adapter *padapter,
+ struct pkt_attrib *pattrib);
+void dump_mgntframe(struct adapter *padapter, struct xmit_frame *pmgntframe);
+s32 dump_mgntframe_and_wait(struct adapter *padapter,
+ struct xmit_frame *pmgntframe, int timeout_ms);
+s32 dump_mgntframe_and_wait_ack(struct adapter *padapter,
+ struct xmit_frame *pmgntframe);
+
+#ifdef CONFIG_88EU_P2P
+void issue_probersp_p2p(struct adapter *padapter, unsigned char *da);
+void issue_p2p_provision_request(struct adapter *padapter, u8 *pssid,
+ u8 ussidlen, u8 *pdev_raddr);
+void issue_p2p_GO_request(struct adapter *padapter, u8 *raddr);
+void issue_probereq_p2p(struct adapter *padapter, u8 *da);
+int issue_probereq_p2p_ex(struct adapter *adapter, u8 *da, int try_cnt,
+ int wait_ms);
+void issue_p2p_invitation_response(struct adapter *padapter, u8 *raddr,
+ u8 dialogToken, u8 success);
+void issue_p2p_invitation_request(struct adapter *padapter, u8* raddr);
+#endif /* CONFIG_88EU_P2P */
+void issue_beacon(struct adapter *padapter, int timeout_ms);
+void issue_probersp(struct adapter *padapter, unsigned char *da,
+ u8 is_valid_p2p_probereq);
+void issue_assocreq(struct adapter *padapter);
+void issue_asocrsp(struct adapter *padapter, unsigned short status,
+ struct sta_info *pstat, int pkt_type);
+void issue_auth(struct adapter *padapter, struct sta_info *psta,
+ unsigned short status);
+void issue_probereq(struct adapter *padapter, struct ndis_802_11_ssid *pssid,
+ u8 *da);
+s32 issue_probereq_ex(struct adapter *adapter, struct ndis_802_11_ssid *pssid,
+ u8* da, int try_cnt, int wait_ms);
+int issue_nulldata(struct adapter *padapter, unsigned char *da,
+ unsigned int power_mode, int try_cnt, int wait_ms);
+int issue_qos_nulldata(struct adapter *padapter, unsigned char *da,
+ u16 tid, int try_cnt, int wait_ms);
+int issue_deauth(struct adapter *padapter, unsigned char *da,
+ unsigned short reason);
+int issue_deauth_ex(struct adapter *padapter, u8 *da, unsigned short reason,
+ int try_cnt, int wait_ms);
+void issue_action_spct_ch_switch(struct adapter *padapter, u8 *ra, u8 new_ch,
+ u8 ch_offset);
+void issue_action_BA(struct adapter *padapter, unsigned char *raddr,
+ unsigned char action, unsigned short status);
+unsigned int send_delba(struct adapter *padapter, u8 initiator, u8 *addr);
+unsigned int send_beacon(struct adapter *padapter);
+
+void start_clnt_assoc(struct adapter *padapter);
+void start_clnt_auth(struct adapter *padapter);
+void start_clnt_join(struct adapter *padapter);
+void start_create_ibss(struct adapter *padapter);
+
+unsigned int OnAssocReq(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAssocRsp(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnProbeReq(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnProbeRsp(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int DoReserved(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnBeacon(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAtim(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnDisassoc(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAuth(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAuthClient(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnDeAuth(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+
+unsigned int on_action_spct(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_qos(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_dls(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_back(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int on_action_public(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_ht(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_wmm(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_p2p(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+
+void mlmeext_joinbss_event_callback(struct adapter *padapter, int join_res);
+void mlmeext_sta_del_event_callback(struct adapter *padapter);
+void mlmeext_sta_add_event_callback(struct adapter *padapter,
+ struct sta_info *psta);
+
+void linked_status_chk(struct adapter *padapter);
+
+void survey_timer_hdl (struct adapter *padapter);
+void link_timer_hdl (struct adapter *padapter);
+void addba_timer_hdl(struct sta_info *psta);
+
+#define set_survey_timer(mlmeext, ms) \
+ do { \
+ _set_timer(&(mlmeext)->survey_timer, (ms)); \
+ } while (0)
+
+#define set_link_timer(mlmeext, ms) \
+ do { \
+ _set_timer(&(mlmeext)->link_timer, (ms)); \
+ } while (0)
+
+int cckrates_included(unsigned char *rate, int ratelen);
+int cckratesonly_included(unsigned char *rate, int ratelen);
+
+void process_addba_req(struct adapter *padapter, u8 *paddba_req, u8 *addr);
+
+void update_TSF(struct mlme_ext_priv *pmlmeext, u8 *pframe, uint len);
+void correct_TSF(struct adapter *padapter, struct mlme_ext_priv *pmlmeext);
+
+struct cmd_hdl {
+ uint parmsize;
+ u8 (*h2cfuns)(struct adapter *padapter, u8 *pbuf);
+};
+
+u8 read_macreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 write_macreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 read_bbreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 write_bbreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 read_rfreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 write_rfreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 NULL_hdl(struct adapter *padapter, u8 *pbuf);
+u8 join_cmd_hdl(struct adapter *padapter, u8 *pbuf);
+u8 disconnect_hdl(struct adapter *padapter, u8 *pbuf);
+u8 createbss_hdl(struct adapter *padapter, u8 *pbuf);
+u8 setopmode_hdl(struct adapter *padapter, u8 *pbuf);
+u8 sitesurvey_cmd_hdl(struct adapter *padapter, u8 *pbuf);
+u8 setauth_hdl(struct adapter *padapter, u8 *pbuf);
+u8 setkey_hdl(struct adapter *padapter, u8 *pbuf);
+u8 set_stakey_hdl(struct adapter *padapter, u8 *pbuf);
+u8 set_assocsta_hdl(struct adapter *padapter, u8 *pbuf);
+u8 del_assocsta_hdl(struct adapter *padapter, u8 *pbuf);
+u8 add_ba_hdl(struct adapter *padapter, unsigned char *pbuf);
+
+u8 mlme_evt_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 h2c_msg_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 tx_beacon_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 set_ch_hdl(struct adapter *padapter, u8 *pbuf);
+u8 set_chplan_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 led_blink_hdl(struct adapter *padapter, unsigned char *pbuf);
+/* Handling DFS channel switch announcement ie. */
+u8 set_csa_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 tdls_hdl(struct adapter *padapter, unsigned char *pbuf);
+
+#define GEN_DRV_CMD_HANDLER(size, cmd) {size, &cmd ## _hdl},
+#define GEN_MLME_EXT_HANDLER(size, cmd) {size, cmd},
+
+#ifdef _RTW_CMD_C_
+
+static struct cmd_hdl wlancmds[] = {
+ GEN_DRV_CMD_HANDLER(0, NULL) /*0*/
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL) /*10*/
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct joinbss_parm), join_cmd_hdl) /*14*/
+ GEN_MLME_EXT_HANDLER(sizeof (struct disconnect_parm), disconnect_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct createbss_parm), createbss_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setopmode_parm), setopmode_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct sitesurvey_parm),
+ sitesurvey_cmd_hdl) /*18*/
+ GEN_MLME_EXT_HANDLER(sizeof (struct setauth_parm), setauth_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setkey_parm), setkey_hdl) /*20*/
+ GEN_MLME_EXT_HANDLER(sizeof (struct set_stakey_parm), set_stakey_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct set_assocsta_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct del_assocsta_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setstapwrstate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setbasicrate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct getbasicrate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setdatarate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct getdatarate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setphyinfo_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct getphyinfo_parm), NULL) /*30*/
+ GEN_MLME_EXT_HANDLER(sizeof (struct setphy_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct getphy_parm), NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL) /*40*/
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(sizeof(struct addBaReq_parm), add_ba_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct set_ch_parm), set_ch_hdl) /* 46 */
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL) /*50*/
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(sizeof(struct Tx_Beacon_param),
+ tx_beacon_hdl) /*55*/
+
+ GEN_MLME_EXT_HANDLER(0, mlme_evt_hdl) /*56*/
+ GEN_MLME_EXT_HANDLER(0, rtw_drvextra_cmd_hdl) /*57*/
+
+ GEN_MLME_EXT_HANDLER(0, h2c_msg_hdl) /*58*/
+ GEN_MLME_EXT_HANDLER(sizeof(struct SetChannelPlan_param),
+ set_chplan_hdl) /*59*/
+ GEN_MLME_EXT_HANDLER(sizeof(struct LedBlink_param),
+ led_blink_hdl) /*60*/
+
+ GEN_MLME_EXT_HANDLER(sizeof(struct SetChannelSwitch_param),
+ set_csa_hdl) /*61*/
+ GEN_MLME_EXT_HANDLER(sizeof(struct TDLSoption_param),
+ tdls_hdl) /*62*/
+};
+
+#endif
+
+struct C2HEvent_Header {
+#ifdef __LITTLE_ENDIAN
+ unsigned int len:16;
+ unsigned int ID:8;
+ unsigned int seq:8;
+#elif defined(__BIG_ENDIAN)
+ unsigned int seq:8;
+ unsigned int ID:8;
+ unsigned int len:16;
+#endif
+ unsigned int rsvd;
+};
+
+void rtw_dummy_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_fwdbg_event_callback(struct adapter *adapter, u8 *pbuf);
+
+enum rtw_c2h_event {
+ GEN_EVT_CODE(_Read_MACREG) = 0, /*0*/
+ GEN_EVT_CODE(_Read_BBREG),
+ GEN_EVT_CODE(_Read_RFREG),
+ GEN_EVT_CODE(_Read_EEPROM),
+ GEN_EVT_CODE(_Read_EFUSE),
+ GEN_EVT_CODE(_Read_CAM), /*5*/
+ GEN_EVT_CODE(_Get_BasicRate),
+ GEN_EVT_CODE(_Get_DataRate),
+ GEN_EVT_CODE(_Survey), /*8*/
+ GEN_EVT_CODE(_SurveyDone), /*9*/
+
+ GEN_EVT_CODE(_JoinBss) , /*10*/
+ GEN_EVT_CODE(_AddSTA),
+ GEN_EVT_CODE(_DelSTA),
+ GEN_EVT_CODE(_AtimDone),
+ GEN_EVT_CODE(_TX_Report),
+ GEN_EVT_CODE(_CCX_Report), /*15*/
+ GEN_EVT_CODE(_DTM_Report),
+ GEN_EVT_CODE(_TX_Rate_Statistics),
+ GEN_EVT_CODE(_C2HLBK),
+ GEN_EVT_CODE(_FWDBG),
+ GEN_EVT_CODE(_C2HFEEDBACK), /*20*/
+ GEN_EVT_CODE(_ADDBA),
+ GEN_EVT_CODE(_C2HBCN),
+ GEN_EVT_CODE(_ReportPwrState), /* filen: only for PCIE, USB */
+ GEN_EVT_CODE(_CloseRF), /* filen: only for PCIE,
+ * work around ASPM */
+ MAX_C2HEVT
+};
+
+#ifdef _RTW_MLME_EXT_C_
+
+static struct fwevent wlanevents[] = {
+ {0, rtw_dummy_event_callback}, /*0*/
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, &rtw_survey_event_callback}, /*8*/
+ {sizeof (struct surveydone_event), &rtw_surveydone_event_callback},/*9*/
+ {0, &rtw_joinbss_event_callback}, /*10*/
+ {sizeof(struct stassoc_event), &rtw_stassoc_event_callback},
+ {sizeof(struct stadel_event), &rtw_stadel_event_callback},
+ {0, &rtw_atimdone_event_callback},
+ {0, rtw_dummy_event_callback},
+ {0, NULL}, /*15*/
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, rtw_fwdbg_event_callback},
+ {0, NULL}, /*20*/
+ {0, NULL},
+ {0, NULL},
+ {0, &rtw_cpwm_event_callback},
+ {0, NULL},
+};
+
+#endif/* _RTL_MLME_EXT_C_ */
+
+#endif /* __RTW_MLME_EXT_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_mp.h b/drivers/staging/r8188eu/include/rtw_mp.h
new file mode 100644
index 000000000000..9111e58e0598
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mp.h
@@ -0,0 +1,492 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_MP_H_
+#define _RTW_MP_H_
+
+/* 00 - Success */
+/* 11 - Error */
+#define STATUS_SUCCESS (0x00000000L)
+#define STATUS_PENDING (0x00000103L)
+
+#define STATUS_UNSUCCESSFUL (0xC0000001L)
+#define STATUS_INSUFFICIENT_RESOURCES (0xC000009AL)
+#define STATUS_NOT_SUPPORTED (0xC00000BBL)
+
+#define NDIS_STATUS_SUCCESS ((int)STATUS_SUCCESS)
+#define NDIS_STATUS_PENDING ((int)STATUS_PENDING)
+#define NDIS_STATUS_NOT_RECOGNIZED ((int)0x00010001L)
+#define NDIS_STATUS_NOT_COPIED ((int)0x00010002L)
+#define NDIS_STATUS_NOT_ACCEPTED ((int)0x00010003L)
+#define NDIS_STATUS_CALL_ACTIVE ((int)0x00010007L)
+
+#define NDIS_STATUS_FAILURE ((int)STATUS_UNSUCCESSFUL)
+#define NDIS_STATUS_RESOURCES ((int)STATUS_INSUFFICIENT_RESOURCES)
+#define NDIS_STATUS_CLOSING ((int)0xC0010002L)
+#define NDIS_STATUS_BAD_VERSION ((int)0xC0010004L)
+#define NDIS_STATUS_BAD_CHARACTERISTICS ((int)0xC0010005L)
+#define NDIS_STATUS_ADAPTER_NOT_FOUND ((int)0xC0010006L)
+#define NDIS_STATUS_OPEN_FAILED ((int)0xC0010007L)
+#define NDIS_STATUS_DEVICE_FAILED ((int)0xC0010008L)
+#define NDIS_STATUS_MULTICAST_FULL ((int)0xC0010009L)
+#define NDIS_STATUS_MULTICAST_EXISTS ((int)0xC001000AL)
+#define NDIS_STATUS_MULTICAST_NOT_FOUND ((int)0xC001000BL)
+#define NDIS_STATUS_REQUEST_ABORTED ((int)0xC001000CL)
+#define NDIS_STATUS_RESET_IN_PROGRESS ((int)0xC001000DL)
+#define NDIS_STATUS_CLOSING_INDICATING ((int)0xC001000EL)
+#define NDIS_STATUS_NOT_SUPPORTED ((int)STATUS_NOT_SUPPORTED)
+#define NDIS_STATUS_INVALID_PACKET ((int)0xC001000FL)
+#define NDIS_STATUS_OPEN_LIST_FULL ((int)0xC0010010L)
+#define NDIS_STATUS_ADAPTER_NOT_READY ((int)0xC0010011L)
+#define NDIS_STATUS_ADAPTER_NOT_OPEN ((int)0xC0010012L)
+#define NDIS_STATUS_NOT_INDICATING ((int)0xC0010013L)
+#define NDIS_STATUS_INVALID_LENGTH ((int)0xC0010014L)
+#define NDIS_STATUS_INVALID_DATA ((int)0xC0010015L)
+#define NDIS_STATUS_BUFFER_TOO_SHORT ((int)0xC0010016L)
+#define NDIS_STATUS_INVALID_OID ((int)0xC0010017L)
+#define NDIS_STATUS_ADAPTER_REMOVED ((int)0xC0010018L)
+#define NDIS_STATUS_UNSUPPORTED_MEDIA ((int)0xC0010019L)
+#define NDIS_STATUS_GROUP_ADDRESS_IN_USE ((int)0xC001001AL)
+#define NDIS_STATUS_FILE_NOT_FOUND ((int)0xC001001BL)
+#define NDIS_STATUS_ERROR_READING_FILE ((int)0xC001001CL)
+#define NDIS_STATUS_ALREADY_MAPPED ((int)0xC001001DL)
+#define NDIS_STATUS_RESOURCE_CONFLICT ((int)0xC001001EL)
+#define NDIS_STATUS_NO_CABLE ((int)0xC001001FL)
+
+#define NDIS_STATUS_INVALID_SAP ((int)0xC0010020L)
+#define NDIS_STATUS_SAP_IN_USE ((int)0xC0010021L)
+#define NDIS_STATUS_INVALID_ADDRESS ((int)0xC0010022L)
+#define NDIS_STATUS_VC_NOT_ACTIVATED ((int)0xC0010023L)
+#define NDIS_STATUS_DEST_OUT_OF_ORDER ((int)0xC0010024L) /*cause 27*/
+#define NDIS_STATUS_VC_NOT_AVAILABLE ((int)0xC0010025L) /*cause 35,45 */
+#define NDIS_STATUS_CELLRATE_NOT_AVAILABLE ((int)0xC0010026L) /*cause 37*/
+#define NDIS_STATUS_INCOMPATABLE_QOS ((int)0xC0010027L) /*cause 49*/
+#define NDIS_STATUS_AAL_PARAMS_UNSUPPORTED ((int)0xC0010028L) /*cause 93*/
+#define NDIS_STATUS_NO_ROUTE_TO_DESTINATION ((int)0xC0010029L) /*cause 3 */
+
+enum antenna_path {
+ ANTENNA_NONE = 0x00,
+ ANTENNA_D,
+ ANTENNA_C,
+ ANTENNA_CD,
+ ANTENNA_B,
+ ANTENNA_BD,
+ ANTENNA_BC,
+ ANTENNA_BCD,
+ ANTENNA_A,
+ ANTENNA_AD,
+ ANTENNA_AC,
+ ANTENNA_ACD,
+ ANTENNA_AB,
+ ANTENNA_ABD,
+ ANTENNA_ABC,
+ ANTENNA_ABCD
+};
+
+#define MAX_MP_XMITBUF_SZ 2048
+#define NR_MP_XMITFRAME 8
+
+struct mp_xmit_frame {
+ struct list_head list;
+ struct pkt_attrib attrib;
+ struct sk_buff *pkt;
+ int frame_tag;
+ struct adapter *padapter;
+ struct urb *pxmit_urb[8];
+ /* insert urb, irp, and irpcnt info below... */
+ u8 *mem_addr;
+ u32 sz[8];
+ u8 bpending[8];
+ int ac_tag[8];
+ int last[8];
+ uint irpcnt;
+ uint fragcnt;
+ uint mem[(MAX_MP_XMITBUF_SZ >> 2)];
+};
+
+struct mp_wiparam {
+ u32 bcompleted;
+ u32 act_type;
+ u32 io_offset;
+ u32 io_value;
+};
+
+typedef void(*wi_act_func)(void *padapter);
+
+struct mp_tx {
+ u8 stop;
+ u32 count, sended;
+ u8 payload;
+ struct pkt_attrib attrib;
+ struct tx_desc desc;
+ u8 *pallocated_buf;
+ u8 *buf;
+ u32 buf_size, write_size;
+ void *PktTxThread;
+};
+
+#include <Hal8188EPhyCfg.h>
+
+#define MP_MAX_LINES 1000
+#define MP_MAX_LINES_BYTES 256
+
+typedef void (*MPT_WORK_ITEM_HANDLER)(void *Adapter);
+
+struct mpt_context {
+ /* Indicate if we have started Mass Production Test. */
+ bool bMassProdTest;
+
+ /* Indicate if the driver is unloading or unloaded. */
+ bool bMptDrvUnload;
+
+ struct semaphore MPh2c_Sema;
+ struct timer_list MPh2c_timeout_timer;
+/* Event used to sync H2c for BT control */
+
+ bool MptH2cRspEvent;
+ bool MptBtC2hEvent;
+ bool bMPh2c_timeout;
+
+ /* 8190 PCI does not support NDIS_WORK_ITEM. */
+ /* Work Item for Mass Production Test. */
+ /* Event used to sync the case unloading driver and MptWorkItem
+ * is still in progress. */
+ /* Indicate a MptWorkItem is scheduled and not yet finished. */
+ bool bMptWorkItemInProgress;
+ /* An instance which implements function and context of MptWorkItem. */
+ MPT_WORK_ITEM_HANDLER CurrMptAct;
+
+ /* 1=Start, 0=Stop from UI. */
+ u32 MptTestStart;
+ /* _TEST_MODE, defined in MPT_Req2.h */
+ u32 MptTestItem;
+ /* Variable needed in each implementation of CurrMptAct. */
+ u32 MptActType; /* Type of action performed in CurrMptAct. */
+ /* The Offset of IO operation is depend of MptActType. */
+ u32 MptIoOffset;
+ /* The Value of IO operation is depend of MptActType. */
+ u32 MptIoValue;
+ /* The RfPath of IO operation is depend of MptActType. */
+ u32 MptRfPath;
+
+ enum wireless_mode MptWirelessModeToSw; /* Wireless mode to switch. */
+ u8 MptChannelToSw; /* Channel to switch. */
+ u8 MptInitGainToSet; /* Initial gain to set. */
+ u32 MptBandWidth; /* bandwidth to switch. */
+ u32 MptRateIndex; /* rate index. */
+ /* Register value kept for Single Carrier Tx test. */
+ u8 btMpCckTxPower;
+ /* Register value kept for Single Carrier Tx test. */
+ u8 btMpOfdmTxPower;
+ /* For MP Tx Power index */
+ u8 TxPwrLevel[2]; /* rf-A, rf-B */
+
+ /* Content of RCR Regsiter for Mass Production Test. */
+ u32 MptRCR;
+ /* true if we only receive packets with specific pattern. */
+ bool bMptFilterPattern;
+ /* Rx OK count, statistics used in Mass Production Test. */
+ u32 MptRxOkCnt;
+ /* Rx CRC32 error count, statistics used in Mass Production Test. */
+ u32 MptRxCrcErrCnt;
+
+ bool bCckContTx; /* true if we are in CCK Continuous Tx test. */
+ bool bOfdmContTx; /* true if we are in OFDM Continuous Tx test. */
+ bool bStartContTx; /* true if we have start Continuous Tx test. */
+ /* true if we are in Single Carrier Tx test. */
+ bool bSingleCarrier;
+ /* true if we are in Carrier Suppression Tx Test. */
+ bool bCarrierSuppression;
+ /* true if we are in Single Tone Tx test. */
+ bool bSingleTone;
+
+ /* ACK counter asked by K.Y.. */
+ bool bMptEnableAckCounter;
+ u32 MptAckCounter;
+
+ u8 APK_bound[2]; /* for APK path A/path B */
+ bool bMptIndexEven;
+
+ u8 backup0xc50;
+ u8 backup0xc58;
+ u8 backup0xc30;
+ u8 backup0x52_RF_A;
+ u8 backup0x52_RF_B;
+
+ u8 h2cReqNum;
+ u8 c2hBuf[20];
+
+ u8 btInBuf[100];
+ u32 mptOutLen;
+ u8 mptOutBuf[100];
+};
+
+enum {
+ WRITE_REG = 1,
+ READ_REG,
+ WRITE_RF,
+ READ_RF,
+ MP_START,
+ MP_STOP,
+ MP_RATE,
+ MP_CHANNEL,
+ MP_BANDWIDTH,
+ MP_TXPOWER,
+ MP_ANT_TX,
+ MP_ANT_RX,
+ MP_CTX,
+ MP_QUERY,
+ MP_ARX,
+ MP_PSD,
+ MP_PWRTRK,
+ MP_THER,
+ MP_IOCTL,
+ EFUSE_GET,
+ EFUSE_SET,
+ MP_RESET_STATS,
+ MP_DUMP,
+ MP_PHYPARA,
+ MP_SetRFPathSwh,
+ MP_QueryDrvStats,
+ MP_SetBT,
+ CTA_TEST,
+ MP_NULL,
+};
+
+struct mp_priv {
+ struct adapter *papdater;
+
+ /* Testing Flag */
+ /* 0 for normal type packet, 1 for loopback packet (16bytes TXCMD) */
+ u32 mode;
+
+ u32 prev_fw_state;
+
+ /* OID cmd handler */
+ struct mp_wiparam workparam;
+
+ /* Tx Section */
+ u8 TID;
+ u32 tx_pktcount;
+ struct mp_tx tx;
+
+ /* Rx Section */
+ u32 rx_pktcount;
+ u32 rx_crcerrpktcount;
+ u32 rx_pktloss;
+
+ struct recv_stat rxstat;
+
+ /* RF/BB relative */
+ u8 channel;
+ u8 bandwidth;
+ u8 prime_channel_offset;
+ u8 txpoweridx;
+ u8 txpoweridx_b;
+ u8 rateidx;
+ u32 preamble;
+ u32 CrystalCap;
+
+ u16 antenna_tx;
+ u16 antenna_rx;
+
+ u8 check_mp_pkt;
+
+ u8 bSetTxPower;
+
+ struct wlan_network mp_network;
+ unsigned char network_macaddr[ETH_ALEN];
+
+ u8 *pallocated_mp_xmitframe_buf;
+ u8 *pmp_xmtframe_buf;
+ struct __queue free_mp_xmitqueue;
+ u32 free_mp_xmitframe_cnt;
+
+ struct mpt_context MptCtx;
+};
+
+struct iocmd_struct {
+ u8 cmdclass;
+ u16 value;
+ u8 index;
+};
+
+struct rf_reg_param {
+ u32 path;
+ u32 offset;
+ u32 value;
+};
+
+struct bb_reg_param {
+ u32 offset;
+ u32 value;
+};
+/* */
+
+#define LOWER true
+#define RAISE false
+
+/* Hardware Registers */
+#define BB_REG_BASE_ADDR 0x800
+
+/* MP variables */
+enum mp_mode_{
+ MP_OFF,
+ MP_ON,
+ MP_ERR,
+ MP_CONTINUOUS_TX,
+ MP_SINGLE_CARRIER_TX,
+ MP_CARRIER_SUPPRISSION_TX,
+ MP_SINGLE_TONE_TX,
+ MP_PACKET_TX,
+ MP_PACKET_RX
+};
+
+extern u8 mpdatarate[NumRates];
+
+/* MP set force data rate base on the definition. */
+enum mpt_rate_index {
+ /* CCK rate. */
+ MPT_RATE_1M, /* 0 */
+ MPT_RATE_2M,
+ MPT_RATE_55M,
+ MPT_RATE_11M, /* 3 */
+
+ /* OFDM rate. */
+ MPT_RATE_6M, /* 4 */
+ MPT_RATE_9M,
+ MPT_RATE_12M,
+ MPT_RATE_18M,
+ MPT_RATE_24M,
+ MPT_RATE_36M,
+ MPT_RATE_48M,
+ MPT_RATE_54M, /* 11 */
+
+ /* HT rate. */
+ MPT_RATE_MCS0, /* 12 */
+ MPT_RATE_MCS1,
+ MPT_RATE_MCS2,
+ MPT_RATE_MCS3,
+ MPT_RATE_MCS4,
+ MPT_RATE_MCS5,
+ MPT_RATE_MCS6,
+ MPT_RATE_MCS7, /* 19 */
+ MPT_RATE_MCS8,
+ MPT_RATE_MCS9,
+ MPT_RATE_MCS10,
+ MPT_RATE_MCS11,
+ MPT_RATE_MCS12,
+ MPT_RATE_MCS13,
+ MPT_RATE_MCS14,
+ MPT_RATE_MCS15, /* 27 */
+ MPT_RATE_LAST
+};
+
+#define MAX_TX_PWR_INDEX_N_MODE 64 /* 0x3F */
+
+enum power_mode {
+ POWER_LOW = 0,
+ POWER_NORMAL
+};
+
+#define RX_PKT_BROADCAST 1
+#define RX_PKT_DEST_ADDR 2
+#define RX_PKT_PHY_MATCH 3
+
+enum encry_ctrl_state {
+ HW_CONTROL, /* hw encryption& decryption */
+ SW_CONTROL, /* sw encryption& decryption */
+ HW_ENCRY_SW_DECRY, /* hw encryption & sw decryption */
+ SW_ENCRY_HW_DECRY /* sw encryption & hw decryption */
+};
+
+s32 init_mp_priv(struct adapter *padapter);
+void free_mp_priv(struct mp_priv *pmp_priv);
+s32 MPT_InitializeAdapter(struct adapter *padapter, u8 Channel);
+void MPT_DeInitAdapter(struct adapter *padapter);
+s32 mp_start_test(struct adapter *padapter);
+void mp_stop_test(struct adapter *padapter);
+
+u32 _read_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 bitmask);
+void _write_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val);
+
+u32 read_macreg(struct adapter *padapter, u32 addr, u32 sz);
+void write_macreg(struct adapter *padapter, u32 addr, u32 val, u32 sz);
+u32 read_bbreg(struct adapter *padapter, u32 addr, u32 bitmask);
+void write_bbreg(struct adapter *padapter, u32 addr, u32 bitmask, u32 val);
+u32 read_rfreg(struct adapter *padapter, u8 rfpath, u32 addr);
+void write_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 val);
+
+void SetChannel(struct adapter *pAdapter);
+void SetBandwidth(struct adapter *pAdapter);
+void SetTxPower(struct adapter *pAdapter);
+void SetAntennaPathPower(struct adapter *pAdapter);
+void SetDataRate(struct adapter *pAdapter);
+
+void SetAntenna(struct adapter *pAdapter);
+
+s32 SetThermalMeter(struct adapter *pAdapter, u8 target_ther);
+void GetThermalMeter(struct adapter *pAdapter, u8 *value);
+
+void SetContinuousTx(struct adapter *pAdapter, u8 bStart);
+void SetSingleCarrierTx(struct adapter *pAdapter, u8 bStart);
+void SetSingleToneTx(struct adapter *pAdapter, u8 bStart);
+void SetCarrierSuppressionTx(struct adapter *pAdapter, u8 bStart);
+void PhySetTxPowerLevel(struct adapter *pAdapter);
+
+void fill_txdesc_for_mp(struct adapter *padapter, struct tx_desc *ptxdesc);
+void SetPacketTx(struct adapter *padapter);
+void SetPacketRx(struct adapter *pAdapter, u8 bStartRx);
+
+void ResetPhyRxPktCount(struct adapter *pAdapter);
+u32 GetPhyRxPktReceived(struct adapter *pAdapter);
+u32 GetPhyRxPktCRC32Error(struct adapter *pAdapter);
+
+s32 SetPowerTracking(struct adapter *padapter, u8 enable);
+void GetPowerTracking(struct adapter *padapter, u8 *enable);
+u32 mp_query_psd(struct adapter *pAdapter, u8 *data);
+void Hal_SetAntenna(struct adapter *pAdapter);
+void Hal_SetBandwidth(struct adapter *pAdapter);
+void Hal_SetTxPower(struct adapter *pAdapter);
+void Hal_SetCarrierSuppressionTx(struct adapter *pAdapter, u8 bStart);
+void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart);
+void Hal_SetSingleCarrierTx (struct adapter *pAdapter, u8 bStart);
+void Hal_SetContinuousTx (struct adapter *pAdapter, u8 bStart);
+void Hal_SetBandwidth(struct adapter *pAdapter);
+void Hal_SetDataRate(struct adapter *pAdapter);
+void Hal_SetChannel(struct adapter *pAdapter);
+void Hal_SetAntennaPathPower(struct adapter *pAdapter);
+s32 Hal_SetThermalMeter(struct adapter *pAdapter, u8 target_ther);
+s32 Hal_SetPowerTracking(struct adapter *padapter, u8 enable);
+void Hal_GetPowerTracking(struct adapter *padapter, u8 * enable);
+void Hal_GetThermalMeter(struct adapter *pAdapter, u8 *value);
+void Hal_mpt_SwitchRfSetting(struct adapter *pAdapter);
+void Hal_MPT_CCKTxPowerAdjust(struct adapter * Adapter, bool bInCH14);
+void Hal_MPT_CCKTxPowerAdjustbyIndex(struct adapter *pAdapter, bool beven);
+void Hal_SetCCKTxPower(struct adapter *pAdapter, u8 * TxPower);
+void Hal_SetOFDMTxPower(struct adapter *pAdapter, u8 * TxPower);
+void Hal_TriggerRFThermalMeter(struct adapter *pAdapter);
+u8 Hal_ReadRFThermalMeter(struct adapter *pAdapter);
+void Hal_SetCCKContinuousTx(struct adapter *pAdapter, u8 bStart);
+void Hal_SetOFDMContinuousTx(struct adapter *pAdapter, u8 bStart);
+void Hal_ProSetCrystalCap (struct adapter *pAdapter , u32 CrystalCapVal);
+void _rtw_mp_xmit_priv(struct xmit_priv *pxmitpriv);
+void MP_PHY_SetRFPathSwitch(struct adapter *pAdapter ,bool bMain);
+
+#endif /* _RTW_MP_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_mp_ioctl.h b/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
new file mode 100644
index 000000000000..12835e448d80
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
@@ -0,0 +1,339 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_MP_IOCTL_H_
+#define _RTW_MP_IOCTL_H_
+
+#include <drv_types.h>
+#include <mp_custom_oid.h>
+#include <rtw_ioctl.h>
+#include <rtw_ioctl_rtl.h>
+#include <rtw_efuse.h>
+#include <rtw_mp.h>
+
+/* */
+struct cfg_dbg_msg_struct {
+ u32 DebugLevel;
+ u32 DebugComponent_H32;
+ u32 DebugComponent_L32;
+};
+
+struct mp_rw_reg {
+ u32 offset;
+ u32 width;
+ u32 value;
+};
+
+struct efuse_access_struct {
+ u16 start_addr;
+ u16 cnts;
+ u8 data[0];
+};
+
+struct burst_rw_reg {
+ u32 offset;
+ u32 len;
+ u8 Data[256];
+};
+
+struct usb_vendor_req {
+ u8 bRequest;
+ u16 wValue;
+ u16 wIndex;
+ u16 wLength;
+ u8 u8Dir;/* 0:OUT, 1:IN */
+ u8 u8InData;
+};
+
+struct dr_variable_struct {
+ u8 offset;
+ u32 variable;
+};
+
+#define _irqlevel_changed_(a, b)
+
+/* rtl8188eu_oid_rtl_seg_81_80_00 */
+int rtl8188eu_oid_rt_pro_set_data_rate_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_start_test_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_stop_test_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_channel_direct_call_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_antenna_bb_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_tx_power_control_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_81_80_20 */
+int rtl8188eu_oid_rt_pro_query_tx_packet_sent_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_query_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_query_rx_packet_crc32_error_hdl(struct oid_par_priv *par_priv);
+int rtl8188eu_oid_rt_pro_reset_tx_packet_sent_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_reset_rx_packet_received_hdl(struct oid_par_priv *par_priv);
+int rtl8188eu_oid_rt_pro_set_modulation_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_continuous_tx_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_single_carrier_tx_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_carrier_suppression_tx_hdl(struct oid_par_priv *par_priv);
+int rtl8188eu_oid_rt_pro_set_single_tone_tx_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_81_87 */
+int rtl8188eu_oid_rt_pro_write_bb_reg_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_bb_reg_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write_rf_reg_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_rf_reg_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_81_85 */
+int rtl8188eu_oid_rt_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_87_11_00 */
+int rtl8188eu_oid_rt_pro8711_join_bss_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_register_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write_register_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_burst_read_register_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_burst_write_register_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write_txcmd_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read16_eeprom_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write16_eeprom_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro8711_wi_poll_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro8711_pkt_loss_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_rd_attrib_mem_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_wr_attrib_mem_hdl (struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_rf_intfs_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_poll_rx_status_hdl(struct oid_par_priv *poid_par_priv);
+/* rtl8188eu_oid_rtl_seg_87_11_20 */
+int rtl8188eu_oid_rt_pro_cfg_debug_message_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_data_rate_ex_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_basic_rate_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_tssi_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_power_tracking_hdl(struct oid_par_priv *poid_par_priv);
+/* rtl8188eu_oid_rtl_seg_87_11_50 */
+int rtl8188eu_oid_rt_pro_qry_pwrstate_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_pwrstate_hdl(struct oid_par_priv *poid_par_priv);
+/* rtl8188eu_oid_rtl_seg_87_11_F0 */
+int rtl8188eu_oid_rt_pro_h2c_set_rate_table_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_h2c_get_rate_table_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_87_12_00 */
+int rtl8188eu_oid_rt_pro_encryption_ctrl_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_add_sta_info_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_dele_sta_info_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_query_dr_variable_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_rx_packet_type_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_efuse_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write_efuse_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_rw_efuse_pgpkt_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_efuse_current_size_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_efuse_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_efuse_map_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_set_bandwidth_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_set_crystal_cap_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_set_rx_packet_type_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_efuse_max_size_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_tx_agc_offset_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_pkt_test_mode_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_thermal_meter_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_reset_phy_rx_packet_count_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_phy_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_phy_rx_packet_crc32_error_hdl(struct oid_par_priv *par_priv);
+int rtl8188eu_oid_rt_set_power_down_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_power_mode_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_trigger_gpio_hdl(struct oid_par_priv *poid_par_priv);
+
+#ifdef _RTW_MP_IOCTL_C_
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_00[] = {
+ {1, &oid_null_function}, /* 0x00 OID_RT_PRO_RESET_DUT */
+ {1, &rtl8188eu_oid_rt_pro_set_data_rate_hdl}, /* 0x01 */
+ {1, &rtl8188eu_oid_rt_pro_start_test_hdl}, /* 0x02 */
+ {1, &rtl8188eu_oid_rt_pro_stop_test_hdl}, /* 0x03 */
+ {1, &oid_null_function}, /* 0x04 OID_RT_PRO_SET_PREAMBLE */
+ {1, &oid_null_function}, /* 0x05 OID_RT_PRO_SET_SCRAMBLER */
+ {1, &oid_null_function}, /* 0x06 OID_RT_PRO_SET_FILTER_BB */
+ {1, &oid_null_function},/* 0x07 OID_RT_PRO_SET_MANUAL_DIVERSITY_BB */
+ {1, &rtl8188eu_oid_rt_pro_set_channel_direct_call_hdl}, /* 0x08 */
+ {1, &oid_null_function},/* 0x09 OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL */
+ {1, &oid_null_function},/* 0x0A OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL */
+ {1, &rtl8188eu_oid_rt_pro_set_continuous_tx_hdl}, /* 0x0B OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL */
+ {1, &rtl8188eu_oid_rt_pro_set_single_carrier_tx_hdl},/* 0x0C OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS */
+ {1, &oid_null_function}, /* 0x0D OID_RT_PRO_SET_TX_ANTENNA_BB */
+ {1, &rtl8188eu_oid_rt_pro_set_antenna_bb_hdl}, /* 0x0E */
+ {1, &oid_null_function}, /* 0x0F OID_RT_PRO_SET_CR_SCRAMBLER */
+ {1, &oid_null_function}, /* 0x10 OID_RT_PRO_SET_CR_NEW_FILTER */
+ {1, &rtl8188eu_oid_rt_pro_set_tx_power_control_hdl},/* 0x11 OID_RT_PRO_SET_TX_POWER_CONTROL */
+ {1, &oid_null_function}, /* 0x12 OID_RT_PRO_SET_CR_TX_CONFIG */
+ {1, &oid_null_function}, /* 0x13 OID_RT_PRO_GET_TX_POWER_CONTROL */
+ {1, &oid_null_function}, /* 0x14 OID_RT_PRO_GET_CR_SIGNAL_QUALITY */
+ {1, &oid_null_function}, /* 0x15 OID_RT_PRO_SET_CR_SETPOINT */
+ {1, &oid_null_function}, /* 0x16 OID_RT_PRO_SET_INTEGRATOR */
+ {1, &oid_null_function}, /* 0x17 OID_RT_PRO_SET_SIGNAL_QUALITY */
+ {1, &oid_null_function}, /* 0x18 OID_RT_PRO_GET_INTEGRATOR */
+ {1, &oid_null_function}, /* 0x19 OID_RT_PRO_GET_SIGNAL_QUALITY */
+ {1, &oid_null_function}, /* 0x1A OID_RT_PRO_QUERY_EEPROM_TYPE */
+ {1, &oid_null_function}, /* 0x1B OID_RT_PRO_WRITE_MAC_ADDRESS */
+ {1, &oid_null_function}, /* 0x1C OID_RT_PRO_READ_MAC_ADDRESS */
+ {1, &oid_null_function}, /* 0x1D OID_RT_PRO_WRITE_CIS_DATA */
+ {1, &oid_null_function}, /* 0x1E OID_RT_PRO_READ_CIS_DATA */
+ {1, &oid_null_function} /* 0x1F OID_RT_PRO_WRITE_POWER_CONTROL */
+};
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_20[] = {
+ {1, &oid_null_function}, /* 0x20 OID_RT_PRO_READ_POWER_CONTROL */
+ {1, &oid_null_function}, /* 0x21 OID_RT_PRO_WRITE_EEPROM */
+ {1, &oid_null_function}, /* 0x22 OID_RT_PRO_READ_EEPROM */
+ {1, &rtl8188eu_oid_rt_pro_reset_tx_packet_sent_hdl}, /* 0x23 */
+ {1, &rtl8188eu_oid_rt_pro_query_tx_packet_sent_hdl}, /* 0x24 */
+ {1, &rtl8188eu_oid_rt_pro_reset_rx_packet_received_hdl}, /* 0x25 */
+ {1, &rtl8188eu_oid_rt_pro_query_rx_packet_received_hdl}, /* 0x26 */
+ {1, &rtl8188eu_oid_rt_pro_query_rx_packet_crc32_error_hdl}, /* 0x27 */
+ {1, &oid_null_function}, /* 0x28 OID_RT_PRO_QUERY_CURRENT_ADDRESS */
+ {1, &oid_null_function}, /* 0x29 OID_RT_PRO_QUERY_PERMANENT_ADDRESS */
+ {1, &oid_null_function}, /* 0x2A OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS */
+ {1, &rtl8188eu_oid_rt_pro_set_carrier_suppression_tx_hdl},/* 0x2B OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX */
+ {1, &oid_null_function}, /* 0x2C OID_RT_PRO_RECEIVE_PACKET */
+ {1, &oid_null_function}, /* 0x2D OID_RT_PRO_WRITE_EEPROM_BYTE */
+ {1, &oid_null_function}, /* 0x2E OID_RT_PRO_READ_EEPROM_BYTE */
+ {1, &rtl8188eu_oid_rt_pro_set_modulation_hdl} /* 0x2F */
+};
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_40[] = {
+ {1, &oid_null_function}, /* 0x40 */
+ {1, &oid_null_function}, /* 0x41 */
+ {1, &oid_null_function}, /* 0x42 */
+ {1, &rtl8188eu_oid_rt_pro_set_single_tone_tx_hdl}, /* 0x43 */
+ {1, &oid_null_function}, /* 0x44 */
+ {1, &oid_null_function} /* 0x45 */
+};
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_80[] = {
+ {1, &oid_null_function}, /* 0x80 OID_RT_DRIVER_OPTION */
+ {1, &oid_null_function}, /* 0x81 OID_RT_RF_OFF */
+ {1, &oid_null_function} /* 0x82 OID_RT_AUTH_STATUS */
+};
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_85[] = {
+ {1, &rtl8188eu_oid_rt_wireless_mode_hdl} /* 0x00 OID_RT_WIRELESS_MODE */
+};
+
+#endif /* _RTL871X_MP_IOCTL_C_ */
+
+struct rwreg_param {
+ u32 offset;
+ u32 width;
+ u32 value;
+};
+
+struct bbreg_param {
+ u32 offset;
+ u32 phymask;
+ u32 value;
+};
+
+struct txpower_param {
+ u32 pwr_index;
+};
+
+struct datarate_param {
+ u32 rate_index;
+};
+
+struct rfintfs_parm {
+ u32 rfintfs;
+};
+
+struct mp_xmit_parm {
+ u8 enable;
+ u32 count;
+ u16 length;
+ u8 payload_type;
+ u8 da[ETH_ALEN];
+};
+
+struct mp_xmit_packet {
+ u32 len;
+ u32 mem[MAX_MP_XMITBUF_SZ >> 2];
+};
+
+struct psmode_param {
+ u32 ps_mode;
+ u32 smart_ps;
+};
+
+/* for OID_RT_PRO_READ16_EEPROM & OID_RT_PRO_WRITE16_EEPROM */
+struct eeprom_rw_param {
+ u32 offset;
+ u16 value;
+};
+
+struct mp_ioctl_handler {
+ u32 paramsize;
+ s32 (*handler)(struct oid_par_priv* poid_par_priv);
+ u32 oid;
+};
+
+struct mp_ioctl_param{
+ u32 subcode;
+ u32 len;
+ u8 data[0];
+};
+
+#define GEN_MP_IOCTL_SUBCODE(code) _MP_IOCTL_ ## code ## _CMD_
+
+enum RTL871X_MP_IOCTL_SUBCODE {
+ GEN_MP_IOCTL_SUBCODE(MP_START), /*0*/
+ GEN_MP_IOCTL_SUBCODE(MP_STOP),
+ GEN_MP_IOCTL_SUBCODE(READ_REG),
+ GEN_MP_IOCTL_SUBCODE(WRITE_REG),
+ GEN_MP_IOCTL_SUBCODE(READ_BB_REG),
+ GEN_MP_IOCTL_SUBCODE(WRITE_BB_REG), /*5*/
+ GEN_MP_IOCTL_SUBCODE(READ_RF_REG),
+ GEN_MP_IOCTL_SUBCODE(WRITE_RF_REG),
+ GEN_MP_IOCTL_SUBCODE(SET_CHANNEL),
+ GEN_MP_IOCTL_SUBCODE(SET_TXPOWER),
+ GEN_MP_IOCTL_SUBCODE(SET_DATARATE), /*10*/
+ GEN_MP_IOCTL_SUBCODE(SET_BANDWIDTH),
+ GEN_MP_IOCTL_SUBCODE(SET_ANTENNA),
+ GEN_MP_IOCTL_SUBCODE(CNTU_TX),
+ GEN_MP_IOCTL_SUBCODE(SC_TX),
+ GEN_MP_IOCTL_SUBCODE(CS_TX), /*15*/
+ GEN_MP_IOCTL_SUBCODE(ST_TX),
+ GEN_MP_IOCTL_SUBCODE(IOCTL_XMIT_PACKET),
+ GEN_MP_IOCTL_SUBCODE(SET_RX_PKT_TYPE),
+ GEN_MP_IOCTL_SUBCODE(RESET_PHY_RX_PKT_CNT),
+ GEN_MP_IOCTL_SUBCODE(GET_PHY_RX_PKT_RECV), /*20*/
+ GEN_MP_IOCTL_SUBCODE(GET_PHY_RX_PKT_ERROR),
+ GEN_MP_IOCTL_SUBCODE(READ16_EEPROM),
+ GEN_MP_IOCTL_SUBCODE(WRITE16_EEPROM),
+ GEN_MP_IOCTL_SUBCODE(EFUSE),
+ GEN_MP_IOCTL_SUBCODE(EFUSE_MAP), /*25*/
+ GEN_MP_IOCTL_SUBCODE(GET_EFUSE_MAX_SIZE),
+ GEN_MP_IOCTL_SUBCODE(GET_EFUSE_CURRENT_SIZE),
+ GEN_MP_IOCTL_SUBCODE(GET_THERMAL_METER),
+ GEN_MP_IOCTL_SUBCODE(SET_PTM),
+ GEN_MP_IOCTL_SUBCODE(SET_POWER_DOWN), /*30*/
+ GEN_MP_IOCTL_SUBCODE(TRIGGER_GPIO),
+ GEN_MP_IOCTL_SUBCODE(SET_DM_BT), /*35*/
+ GEN_MP_IOCTL_SUBCODE(DEL_BA), /*36*/
+ GEN_MP_IOCTL_SUBCODE(GET_WIFI_STATUS), /*37*/
+ MAX_MP_IOCTL_SUBCODE,
+};
+
+s32 rtl8188eu_mp_ioctl_xmit_packet_hdl(struct oid_par_priv *poid_par_priv);
+
+#define GEN_HANDLER(sz, hdl, oid) {sz, hdl, oid},
+
+#define EXT_MP_IOCTL_HANDLER(sz, subcode, oid) \
+ {sz, rtl8188eu_mp_ioctl_##subcode##_hdl, oid},
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_mp_phy_regdef.h b/drivers/staging/r8188eu/include/rtw_mp_phy_regdef.h
new file mode 100644
index 000000000000..ae4c9df7f42a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mp_phy_regdef.h
@@ -0,0 +1,1079 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/*****************************************************************************
+ *
+ * Module: __RTW_MP_PHY_REGDEF_H_
+ *
+ *
+ * Note: 1. Define PMAC/BB register map
+ * 2. Define RF register map
+ * 3. PMAC/BB register bit mask.
+ * 4. RF reg bit mask.
+ * 5. Other BB/RF relative definition.
+ *
+ *
+ * Export: Constants, macro, functions(API), global variables(None).
+ *
+ * Abbrev:
+ *
+ * History:
+ * Data Who Remark
+ * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h.
+ * 2. Reorganize code architecture.
+ * 09/25/2008 MH 1. Add RL6052 register definition
+ *
+ *****************************************************************************/
+#ifndef __RTW_MP_PHY_REGDEF_H_
+#define __RTW_MP_PHY_REGDEF_H_
+
+/*--------------------------Define Parameters-------------------------------*/
+
+/* */
+/* 8192S Regsiter offset definition */
+/* */
+
+/* */
+/* BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
+/* 3. RF register 0x00-2E */
+/* 4. Bit Mask for BB/RF register */
+/* 5. Other definition for BB/RF R/W */
+/* */
+
+/* */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 1. Page1(0x100) */
+/* */
+#define rPMAC_Reset 0x100
+#define rPMAC_TxStart 0x104
+#define rPMAC_TxLegacySIG 0x108
+#define rPMAC_TxHTSIG1 0x10c
+#define rPMAC_TxHTSIG2 0x110
+#define rPMAC_PHYDebug 0x114
+#define rPMAC_TxPacketNum 0x118
+#define rPMAC_TxIdle 0x11c
+#define rPMAC_TxMACHeader0 0x120
+#define rPMAC_TxMACHeader1 0x124
+#define rPMAC_TxMACHeader2 0x128
+#define rPMAC_TxMACHeader3 0x12c
+#define rPMAC_TxMACHeader4 0x130
+#define rPMAC_TxMACHeader5 0x134
+#define rPMAC_TxDataType 0x138
+#define rPMAC_TxRandomSeed 0x13c
+#define rPMAC_CCKPLCPPreamble 0x140
+#define rPMAC_CCKPLCPHeader 0x144
+#define rPMAC_CCKCRC16 0x148
+#define rPMAC_OFDMRxCRC32OK 0x170
+#define rPMAC_OFDMRxCRC32Er 0x174
+#define rPMAC_OFDMRxParityEr 0x178
+#define rPMAC_OFDMRxCRC8Er 0x17c
+#define rPMAC_CCKCRxRC16Er 0x180
+#define rPMAC_CCKCRxRC32Er 0x184
+#define rPMAC_CCKCRxRC32OK 0x188
+#define rPMAC_TxStatus 0x18c
+
+/* */
+/* 2. Page2(0x200) */
+/* */
+/* The following two definition are only used for USB interface. */
+/* define RF_BB_CMD_ADDR 0x02c0 RF/BB read/write command address. */
+/* define RF_BB_CMD_DATA 0x02c4 RF/BB read/write command data. */
+
+/* */
+/* 3. Page8(0x800) */
+/* */
+#define rFPGA0_RFMOD 0x800 /* RF mode & CCK TxSC RF BW Setting?? */
+
+#define rFPGA0_TxInfo 0x804 /* Status report?? */
+#define rFPGA0_PSDFunction 0x808
+
+#define rFPGA0_TxGainStage 0x80c /* Set TX PWR init gain? */
+
+#define rFPGA0_RFTiming1 0x810 /* Useless now */
+#define rFPGA0_RFTiming2 0x814
+/* define rFPGA0_XC_RFTiming 0x818 */
+/* define rFPGA0_XD_RFTiming 0x81c */
+
+#define rFPGA0_XA_HSSIParameter1 0x820 /* RF 3 wire register */
+#define rFPGA0_XA_HSSIParameter2 0x824
+#define rFPGA0_XB_HSSIParameter1 0x828
+#define rFPGA0_XB_HSSIParameter2 0x82c
+#define rFPGA0_XC_HSSIParameter1 0x830
+#define rFPGA0_XC_HSSIParameter2 0x834
+#define rFPGA0_XD_HSSIParameter1 0x838
+#define rFPGA0_XD_HSSIParameter2 0x83c
+#define rFPGA0_XA_LSSIParameter 0x840
+#define rFPGA0_XB_LSSIParameter 0x844
+#define rFPGA0_XC_LSSIParameter 0x848
+#define rFPGA0_XD_LSSIParameter 0x84c
+
+#define rFPGA0_RFWakeUpParameter 0x850 /* Useless now */
+#define rFPGA0_RFSleepUpParameter 0x854
+
+#define rFPGA0_XAB_SwitchControl 0x858 /* RF Channel switch */
+#define rFPGA0_XCD_SwitchControl 0x85c
+
+#define rFPGA0_XA_RFInterfaceOE 0x860 /* RF Channel switch */
+#define rFPGA0_XB_RFInterfaceOE 0x864
+#define rFPGA0_XC_RFInterfaceOE 0x868
+#define rFPGA0_XD_RFInterfaceOE 0x86c
+
+#define rFPGA0_XAB_RFInterfaceSW 0x870 /* RF Interface Software Control */
+#define rFPGA0_XCD_RFInterfaceSW 0x874
+
+#define rFPGA0_XAB_RFParameter 0x878 /* RF Parameter */
+#define rFPGA0_XCD_RFParameter 0x87c
+
+#define rFPGA0_AnalogParameter1 0x880 /* Crystal cap setting RF-R/W protection for parameter4?? */
+#define rFPGA0_AnalogParameter2 0x884
+#define rFPGA0_AnalogParameter3 0x888 /* Useless now */
+#define rFPGA0_AnalogParameter4 0x88c
+
+#define rFPGA0_XA_LSSIReadBack 0x8a0 /* Tranceiver LSSI Readback */
+#define rFPGA0_XB_LSSIReadBack 0x8a4
+#define rFPGA0_XC_LSSIReadBack 0x8a8
+#define rFPGA0_XD_LSSIReadBack 0x8ac
+
+#define rFPGA0_PSDReport 0x8b4 /* Useless now */
+#define rFPGA0_XAB_RFInterfaceRB 0x8e0 /* Useless now RF Interface Readback Value */
+#define rFPGA0_XCD_RFInterfaceRB 0x8e4 /* Useless now */
+
+/* */
+/* 4. Page9(0x900) */
+/* */
+#define rFPGA1_RFMOD 0x900 /* RF mode & OFDM TxSC RF BW Setting?? */
+
+#define rFPGA1_TxBlock 0x904 /* Useless now */
+#define rFPGA1_DebugSelect 0x908 /* Useless now */
+#define rFPGA1_TxInfo 0x90c /* Useless now Status report?? */
+
+/* */
+/* 5. PageA(0xA00) */
+/* */
+/* Set Control channel to upper or lower. These settings are required only for 40MHz */
+#define rCCK0_System 0xa00
+
+#define rCCK0_AFESetting 0xa04 /* Disable init gain now Select RX path by RSSI */
+#define rCCK0_CCA 0xa08 /* Disable init gain now Init gain */
+
+#define rCCK0_RxAGC1 0xa0c /* AGC default value, saturation level Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series */
+#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */
+
+#define rCCK0_RxHP 0xa14
+
+#define rCCK0_DSPParameter1 0xa18 /* Timing recovery & Channel estimation threshold */
+#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */
+
+#define rCCK0_TxFilter1 0xa20
+#define rCCK0_TxFilter2 0xa24
+#define rCCK0_DebugPort 0xa28 /* debug port and Tx filter3 */
+#define rCCK0_FalseAlarmReport 0xa2c /* 0xa2d useless now 0xa30-a4f channel report */
+#define rCCK0_TRSSIReport 0xa50
+#define rCCK0_RxReport 0xa54 /* 0xa57 */
+#define rCCK0_FACounterLower 0xa5c /* 0xa5b */
+#define rCCK0_FACounterUpper 0xa58 /* 0xa5c */
+
+/* */
+/* 6. PageC(0xC00) */
+/* */
+#define rOFDM0_LSTF 0xc00
+
+#define rOFDM0_TRxPathEnable 0xc04
+#define rOFDM0_TRMuxPar 0xc08
+#define rOFDM0_TRSWIsolation 0xc0c
+
+#define rOFDM0_XARxAFE 0xc10 /* RxIQ DC offset, Rx digital filter, DC notch filter */
+#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */
+#define rOFDM0_XBRxAFE 0xc18
+#define rOFDM0_XBRxIQImbalance 0xc1c
+#define rOFDM0_XCRxAFE 0xc20
+#define rOFDM0_XCRxIQImbalance 0xc24
+#define rOFDM0_XDRxAFE 0xc28
+#define rOFDM0_XDRxIQImbalance 0xc2c
+
+#define rOFDM0_RxDetector1 0xc30 /* PD,BW & SBD DM tune init gain */
+#define rOFDM0_RxDetector2 0xc34 /* SBD & Fame Sync. */
+#define rOFDM0_RxDetector3 0xc38 /* Frame Sync. */
+#define rOFDM0_RxDetector4 0xc3c /* PD, SBD, Frame Sync & Short-GI */
+
+#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */
+#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */
+#define rOFDM0_CCADropThreshold 0xc48 /* CCA Drop threshold */
+#define rOFDM0_ECCAThreshold 0xc4c /* energy CCA */
+
+#define rOFDM0_XAAGCCore1 0xc50 /* DIG */
+#define rOFDM0_XAAGCCore2 0xc54
+#define rOFDM0_XBAGCCore1 0xc58
+#define rOFDM0_XBAGCCore2 0xc5c
+#define rOFDM0_XCAGCCore1 0xc60
+#define rOFDM0_XCAGCCore2 0xc64
+#define rOFDM0_XDAGCCore1 0xc68
+#define rOFDM0_XDAGCCore2 0xc6c
+
+#define rOFDM0_AGCParameter1 0xc70
+#define rOFDM0_AGCParameter2 0xc74
+#define rOFDM0_AGCRSSITable 0xc78
+#define rOFDM0_HTSTFAGC 0xc7c
+
+#define rOFDM0_XATxIQImbalance 0xc80 /* TX PWR TRACK and DIG */
+#define rOFDM0_XATxAFE 0xc84
+#define rOFDM0_XBTxIQImbalance 0xc88
+#define rOFDM0_XBTxAFE 0xc8c
+#define rOFDM0_XCTxIQImbalance 0xc90
+#define rOFDM0_XCTxAFE 0xc94
+#define rOFDM0_XDTxIQImbalance 0xc98
+#define rOFDM0_XDTxAFE 0xc9c
+#define rOFDM0_RxIQExtAnta 0xca0
+
+#define rOFDM0_RxHPParameter 0xce0
+#define rOFDM0_TxPseudoNoiseWgt 0xce4
+#define rOFDM0_FrameSync 0xcf0
+#define rOFDM0_DFSReport 0xcf4
+#define rOFDM0_TxCoeff1 0xca4
+#define rOFDM0_TxCoeff2 0xca8
+#define rOFDM0_TxCoeff3 0xcac
+#define rOFDM0_TxCoeff4 0xcb0
+#define rOFDM0_TxCoeff5 0xcb4
+#define rOFDM0_TxCoeff6 0xcb8
+
+/* 7. PageD(0xD00) */
+#define rOFDM1_LSTF 0xd00
+#define rOFDM1_TRxPathEnable 0xd04
+
+#define rOFDM1_CFO 0xd08 /* No setting now */
+#define rOFDM1_CSI1 0xd10
+#define rOFDM1_SBD 0xd14
+#define rOFDM1_CSI2 0xd18
+#define rOFDM1_CFOTracking 0xd2c
+#define rOFDM1_TRxMesaure1 0xd34
+#define rOFDM1_IntfDet 0xd3c
+#define rOFDM1_PseudoNoiseStateAB 0xd50
+#define rOFDM1_PseudoNoiseStateCD 0xd54
+#define rOFDM1_RxPseudoNoiseWgt 0xd58
+
+#define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */
+#define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */
+#define rOFDM_PHYCounter3 0xda8 /* MCS not support */
+
+#define rOFDM_ShortCFOAB 0xdac /* No setting now */
+#define rOFDM_ShortCFOCD 0xdb0
+#define rOFDM_LongCFOAB 0xdb4
+#define rOFDM_LongCFOCD 0xdb8
+#define rOFDM_TailCFOAB 0xdbc
+#define rOFDM_TailCFOCD 0xdc0
+#define rOFDM_PWMeasure1 0xdc4
+#define rOFDM_PWMeasure2 0xdc8
+#define rOFDM_BWReport 0xdcc
+#define rOFDM_AGCReport 0xdd0
+#define rOFDM_RxSNR 0xdd4
+#define rOFDM_RxEVMCSI 0xdd8
+#define rOFDM_SIGReport 0xddc
+
+/* */
+/* 8. PageE(0xE00) */
+/* */
+#define rTxAGC_Rate18_06 0xe00
+#define rTxAGC_Rate54_24 0xe04
+#define rTxAGC_CCK_Mcs32 0xe08
+#define rTxAGC_Mcs03_Mcs00 0xe10
+#define rTxAGC_Mcs07_Mcs04 0xe14
+#define rTxAGC_Mcs11_Mcs08 0xe18
+#define rTxAGC_Mcs15_Mcs12 0xe1c
+
+/* Analog- control in RX_WAIT_CCA : REG: EE0 [Analog- Power & Control Register] */
+#define rRx_Wait_CCCA 0xe70
+#define rAnapar_Ctrl_BB 0xee0
+
+/* */
+/* 7. RF Register 0x00-0x2E (RF 8256) */
+/* RF-0222D 0x00-3F */
+/* */
+/* Zebra1 */
+#define RTL92SE_FPGA_VERIFY 0
+#define rZebra1_HSSIEnable 0x0 /* Useless now */
+#define rZebra1_TRxEnable1 0x1
+#define rZebra1_TRxEnable2 0x2
+#define rZebra1_AGC 0x4
+#define rZebra1_ChargePump 0x5
+/* if (RTL92SE_FPGA_VERIFY == 1) */
+#define rZebra1_Channel 0x7 /* RF channel switch */
+/* else */
+
+/* endif */
+#define rZebra1_TxGain 0x8 /* Useless now */
+#define rZebra1_TxLPF 0x9
+#define rZebra1_RxLPF 0xb
+#define rZebra1_RxHPFCorner 0xc
+
+/* Zebra4 */
+#define rGlobalCtrl 0 /* Useless now */
+#define rRTL8256_TxLPF 19
+#define rRTL8256_RxLPF 11
+
+/* RTL8258 */
+#define rRTL8258_TxLPF 0x11 /* Useless now */
+#define rRTL8258_RxLPF 0x13
+#define rRTL8258_RSSILPF 0xa
+
+/* */
+/* RL6052 Register definition */
+#define RF_AC 0x00 /* */
+
+#define RF_IQADJ_G1 0x01 /* */
+#define RF_IQADJ_G2 0x02 /* */
+#define RF_POW_TRSW 0x05 /* */
+
+#define RF_GAIN_RX 0x06 /* */
+#define RF_GAIN_TX 0x07 /* */
+
+#define RF_TXM_IDAC 0x08 /* */
+#define RF_BS_IQGEN 0x0F /* */
+
+#define RF_MODE1 0x10 /* */
+#define RF_MODE2 0x11 /* */
+
+#define RF_RX_AGC_HP 0x12 /* */
+#define RF_TX_AGC 0x13 /* */
+#define RF_BIAS 0x14 /* */
+#define RF_IPA 0x15 /* */
+#define RF_TXBIAS 0x16 /* */
+#define RF_POW_ABILITY 0x17 /* */
+#define RF_MODE_AG 0x18 /* */
+#define rRfChannel 0x18 /* RF channel and BW switch */
+#define RF_CHNLBW 0x18 /* RF channel and BW switch */
+#define RF_TOP 0x19 /* */
+
+#define RF_RX_G1 0x1A /* */
+#define RF_RX_G2 0x1B /* */
+
+#define RF_RX_BB2 0x1C /* */
+#define RF_RX_BB1 0x1D /* */
+
+#define RF_RCK1 0x1E /* */
+#define RF_RCK2 0x1F /* */
+
+#define RF_TX_G1 0x20 /* */
+#define RF_TX_G2 0x21 /* */
+#define RF_TX_G3 0x22 /* */
+
+#define RF_TX_BB1 0x23 /* */
+
+#define RF_T_METER 0x24 /* */
+
+#define RF_SYN_G1 0x25 /* RF TX Power control */
+#define RF_SYN_G2 0x26 /* RF TX Power control */
+#define RF_SYN_G3 0x27 /* RF TX Power control */
+#define RF_SYN_G4 0x28 /* RF TX Power control */
+#define RF_SYN_G5 0x29 /* RF TX Power control */
+#define RF_SYN_G6 0x2A /* RF TX Power control */
+#define RF_SYN_G7 0x2B /* RF TX Power control */
+#define RF_SYN_G8 0x2C /* RF TX Power control */
+
+#define RF_RCK_OS 0x30 /* RF TX PA control */
+#define RF_TXPA_G1 0x31 /* RF TX PA control */
+#define RF_TXPA_G2 0x32 /* RF TX PA control */
+#define RF_TXPA_G3 0x33 /* RF TX PA control */
+
+/* */
+/* Bit Mask */
+/* */
+/* 1. Page1(0x100) */
+#define bBBResetB 0x100 /* Useless now? */
+#define bGlobalResetB 0x200
+#define bOFDMTxStart 0x4
+#define bCCKTxStart 0x8
+#define bCRC32Debug 0x100
+#define bPMACLoopback 0x10
+#define bTxLSIG 0xffffff
+#define bOFDMTxRate 0xf
+#define bOFDMTxReserved 0x10
+#define bOFDMTxLength 0x1ffe0
+#define bOFDMTxParity 0x20000
+#define bTxHTSIG1 0xffffff
+#define bTxHTMCSRate 0x7f
+#define bTxHTBW 0x80
+#define bTxHTLength 0xffff00
+#define bTxHTSIG2 0xffffff
+#define bTxHTSmoothing 0x1
+#define bTxHTSounding 0x2
+#define bTxHTReserved 0x4
+#define bTxHTAggreation 0x8
+#define bTxHTSTBC 0x30
+#define bTxHTAdvanceCoding 0x40
+#define bTxHTShortGI 0x80
+#define bTxHTNumberHT_LTF 0x300
+#define bTxHTCRC8 0x3fc00
+#define bCounterReset 0x10000
+#define bNumOfOFDMTx 0xffff
+#define bNumOfCCKTx 0xffff0000
+#define bTxIdleInterval 0xffff
+#define bOFDMService 0xffff0000
+#define bTxMACHeader 0xffffffff
+#define bTxDataInit 0xff
+#define bTxHTMode 0x100
+#define bTxDataType 0x30000
+#define bTxRandomSeed 0xffffffff
+#define bCCKTxPreamble 0x1
+#define bCCKTxSFD 0xffff0000
+#define bCCKTxSIG 0xff
+#define bCCKTxService 0xff00
+#define bCCKLengthExt 0x8000
+#define bCCKTxLength 0xffff0000
+#define bCCKTxCRC16 0xffff
+#define bCCKTxStatus 0x1
+#define bOFDMTxStatus 0x2
+
+#define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && (_Offset <= 0xfff))
+
+/* 2. Page8(0x800) */
+#define bRFMOD 0x1 /* Reg 0x800 rFPGA0_RFMOD */
+#define bJapanMode 0x2
+#define bCCKTxSC 0x30
+#define bCCKEn 0x1000000
+#define bOFDMEn 0x2000000
+
+#define bOFDMRxADCPhase 0x10000 /* Useless now */
+#define bOFDMTxDACPhase 0x40000
+#define bXATxAGC 0x3f
+
+#define bXBTxAGC 0xf00 /* Reg 80c rFPGA0_TxGainStage */
+#define bXCTxAGC 0xf000
+#define bXDTxAGC 0xf0000
+
+#define bPAStart 0xf0000000 /* Useless now */
+#define bTRStart 0x00f00000
+#define bRFStart 0x0000f000
+#define bBBStart 0x000000f0
+#define bBBCCKStart 0x0000000f
+#define bPAEnd 0xf /* Reg0x814 */
+#define bTREnd 0x0f000000
+#define bRFEnd 0x000f0000
+#define bCCAMask 0x000000f0 /* T2R */
+#define bR2RCCAMask 0x00000f00
+#define bHSSI_R2TDelay 0xf8000000
+#define bHSSI_T2RDelay 0xf80000
+#define bContTxHSSI 0x400 /* chane gain at continue Tx */
+#define bIGFromCCK 0x200
+#define bAGCAddress 0x3f
+#define bRxHPTx 0x7000
+#define bRxHPT2R 0x38000
+#define bRxHPCCKIni 0xc0000
+#define bAGCTxCode 0xc00000
+#define bAGCRxCode 0x300000
+
+#define b3WireDataLength 0x800 /* Reg 0x820~84f rFPGA0_XA_HSSIParameter1 */
+#define b3WireAddressLength 0x400
+
+#define b3WireRFPowerDown 0x1 /* Useless now */
+/* define bHWSISelect 0x8 */
+#define b5GPAPEPolarity 0x40000000
+#define b2GPAPEPolarity 0x80000000
+#define bRFSW_TxDefaultAnt 0x3
+#define bRFSW_TxOptionAnt 0x30
+#define bRFSW_RxDefaultAnt 0x300
+#define bRFSW_RxOptionAnt 0x3000
+#define bRFSI_3WireData 0x1
+#define bRFSI_3WireClock 0x2
+#define bRFSI_3WireLoad 0x4
+#define bRFSI_3WireRW 0x8
+#define bRFSI_3Wire 0xf
+
+#define bRFSI_RFENV 0x10 /* Reg 0x870 rFPGA0_XAB_RFInterfaceSW */
+
+#define bRFSI_TRSW 0x20 /* Useless now */
+#define bRFSI_TRSWB 0x40
+#define bRFSI_ANTSW 0x100
+#define bRFSI_ANTSWB 0x200
+#define bRFSI_PAPE 0x400
+#define bRFSI_PAPE5G 0x800
+#define bBandSelect 0x1
+#define bHTSIG2_GI 0x80
+#define bHTSIG2_Smoothing 0x01
+#define bHTSIG2_Sounding 0x02
+#define bHTSIG2_Aggreaton 0x08
+#define bHTSIG2_STBC 0x30
+#define bHTSIG2_AdvCoding 0x40
+#define bHTSIG2_NumOfHTLTF 0x300
+#define bHTSIG2_CRC8 0x3fc
+#define bHTSIG1_MCS 0x7f
+#define bHTSIG1_BandWidth 0x80
+#define bHTSIG1_HTLength 0xffff
+#define bLSIG_Rate 0xf
+#define bLSIG_Reserved 0x10
+#define bLSIG_Length 0x1fffe
+#define bLSIG_Parity 0x20
+#define bCCKRxPhase 0x4
+#if (RTL92SE_FPGA_VERIFY == 1)
+#define bLSSIReadAddress 0x3f000000 /* LSSI "Read" Address
+ Reg 0x824 rFPGA0_XA_HSSIParameter2 */
+#else
+#define bLSSIReadAddress 0x7f800000 /* T65 RF */
+#endif
+#define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */
+#if (RTL92SE_FPGA_VERIFY == 1)
+#define bLSSIReadBackData 0xfff /* Reg 0x8a0
+ rFPGA0_XA_LSSIReadBack */
+#else
+#define bLSSIReadBackData 0xfffff /* T65 RF */
+#endif
+#define bLSSIReadOKFlag 0x1000 /* Useless now */
+#define bCCKSampleRate 0x8 /* 0: 44MHz, 1:88MHz */
+#define bRegulator0Standby 0x1
+#define bRegulatorPLLStandby 0x2
+#define bRegulator1Standby 0x4
+#define bPLLPowerUp 0x8
+#define bDPLLPowerUp 0x10
+#define bDA10PowerUp 0x20
+#define bAD7PowerUp 0x200
+#define bDA6PowerUp 0x2000
+#define bXtalPowerUp 0x4000
+#define b40MDClkPowerUP 0x8000
+#define bDA6DebugMode 0x20000
+#define bDA6Swing 0x380000
+
+#define bADClkPhase 0x4000000 /* Reg 0x880
+ rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */
+
+#define b80MClkDelay 0x18000000 /* Useless */
+#define bAFEWatchDogEnable 0x20000000
+
+#define bXtalCap01 0xc0000000 /* Reg 0x884
+ rFPGA0_AnalogParameter2 Crystal cap */
+#define bXtalCap23 0x3
+#define bXtalCap92x 0x0f000000
+#define bXtalCap 0x0f000000
+
+#define bIntDifClkEnable 0x400 /* Useless */
+#define bExtSigClkEnable 0x800
+#define bBandgapMbiasPowerUp 0x10000
+#define bAD11SHGain 0xc0000
+#define bAD11InputRange 0x700000
+#define bAD11OPCurrent 0x3800000
+#define bIPathLoopback 0x4000000
+#define bQPathLoopback 0x8000000
+#define bAFELoopback 0x10000000
+#define bDA10Swing 0x7e0
+#define bDA10Reverse 0x800
+#define bDAClkSource 0x1000
+#define bAD7InputRange 0x6000
+#define bAD7Gain 0x38000
+#define bAD7OutputCMMode 0x40000
+#define bAD7InputCMMode 0x380000
+#define bAD7Current 0xc00000
+#define bRegulatorAdjust 0x7000000
+#define bAD11PowerUpAtTx 0x1
+#define bDA10PSAtTx 0x10
+#define bAD11PowerUpAtRx 0x100
+#define bDA10PSAtRx 0x1000
+#define bCCKRxAGCFormat 0x200
+#define bPSDFFTSamplepPoint 0xc000
+#define bPSDAverageNum 0x3000
+#define bIQPathControl 0xc00
+#define bPSDFreq 0x3ff
+#define bPSDAntennaPath 0x30
+#define bPSDIQSwitch 0x40
+#define bPSDRxTrigger 0x400000
+#define bPSDTxTrigger 0x80000000
+#define bPSDSineToneScale 0x7f000000
+#define bPSDReport 0xffff
+
+/* 3. Page9(0x900) */
+#define bOFDMTxSC 0x30000000 /* Useless */
+#define bCCKTxOn 0x1
+#define bOFDMTxOn 0x2
+#define bDebugPage 0xfff /* reset debug page and HWord,
+ * LWord */
+#define bDebugItem 0xff /* reset debug page and LWord */
+#define bAntL 0x10
+#define bAntNonHT 0x100
+#define bAntHT1 0x1000
+#define bAntHT2 0x10000
+#define bAntHT1S1 0x100000
+#define bAntNonHTS1 0x1000000
+
+/* 4. PageA(0xA00) */
+#define bCCKBBMode 0x3 /* Useless */
+#define bCCKTxPowerSaving 0x80
+#define bCCKRxPowerSaving 0x40
+
+#define bCCKSideBand 0x10 /* Reg 0xa00 rCCK0 20/40 sw */
+
+#define bCCKScramble 0x8 /* Useless */
+#define bCCKAntDiversity 0x8000
+#define bCCKCarrierRecovery 0x4000
+#define bCCKTxRate 0x3000
+#define bCCKDCCancel 0x0800
+#define bCCKISICancel 0x0400
+#define bCCKMatchFilter 0x0200
+#define bCCKEqualizer 0x0100
+#define bCCKPreambleDetect 0x800000
+#define bCCKFastFalseCCA 0x400000
+#define bCCKChEstStart 0x300000
+#define bCCKCCACount 0x080000
+#define bCCKcs_lim 0x070000
+#define bCCKBistMode 0x80000000
+#define bCCKCCAMask 0x40000000
+#define bCCKTxDACPhase 0x4
+#define bCCKRxADCPhase 0x20000000 /* r_rx_clk */
+#define bCCKr_cp_mode0 0x0100
+#define bCCKTxDCOffset 0xf0
+#define bCCKRxDCOffset 0xf
+#define bCCKCCAMode 0xc000
+#define bCCKFalseCS_lim 0x3f00
+#define bCCKCS_ratio 0xc00000
+#define bCCKCorgBit_sel 0x300000
+#define bCCKPD_lim 0x0f0000
+#define bCCKNewCCA 0x80000000
+#define bCCKRxHPofIG 0x8000
+#define bCCKRxIG 0x7f00
+#define bCCKLNAPolarity 0x800000
+#define bCCKRx1stGain 0x7f0000
+#define bCCKRFExtend 0x20000000 /* CCK Rx init gain polar */
+#define bCCKRxAGCSatLevel 0x1f000000
+#define bCCKRxAGCSatCount 0xe0
+#define bCCKRxRFSettle 0x1f /* AGCsamp_dly */
+#define bCCKFixedRxAGC 0x8000
+#define bCCKAntennaPolarity 0x2000
+#define bCCKTxFilterType 0x0c00
+#define bCCKRxAGCReportType 0x0300
+#define bCCKRxDAGCEn 0x80000000
+#define bCCKRxDAGCPeriod 0x20000000
+#define bCCKRxDAGCSatLevel 0x1f000000
+#define bCCKTimingRecovery 0x800000
+#define bCCKTxC0 0x3f0000
+#define bCCKTxC1 0x3f000000
+#define bCCKTxC2 0x3f
+#define bCCKTxC3 0x3f00
+#define bCCKTxC4 0x3f0000
+#define bCCKTxC5 0x3f000000
+#define bCCKTxC6 0x3f
+#define bCCKTxC7 0x3f00
+#define bCCKDebugPort 0xff0000
+#define bCCKDACDebug 0x0f000000
+#define bCCKFalseAlarmEnable 0x8000
+#define bCCKFalseAlarmRead 0x4000
+#define bCCKTRSSI 0x7f
+#define bCCKRxAGCReport 0xfe
+#define bCCKRxReport_AntSel 0x80000000
+#define bCCKRxReport_MFOff 0x40000000
+#define bCCKRxRxReport_SQLoss 0x20000000
+#define bCCKRxReport_Pktloss 0x10000000
+#define bCCKRxReport_Lockedbit 0x08000000
+#define bCCKRxReport_RateError 0x04000000
+#define bCCKRxReport_RxRate 0x03000000
+#define bCCKRxFACounterLower 0xff
+#define bCCKRxFACounterUpper 0xff000000
+#define bCCKRxHPAGCStart 0xe000
+#define bCCKRxHPAGCFinal 0x1c00
+#define bCCKRxFalseAlarmEnable 0x8000
+#define bCCKFACounterFreeze 0x4000
+#define bCCKTxPathSel 0x10000000
+#define bCCKDefaultRxPath 0xc000000
+#define bCCKOptionRxPath 0x3000000
+
+/* 5. PageC(0xC00) */
+#define bNumOfSTF 0x3 /* Useless */
+#define bShift_L 0xc0
+#define bGI_TH 0xc
+#define bRxPathA 0x1
+#define bRxPathB 0x2
+#define bRxPathC 0x4
+#define bRxPathD 0x8
+#define bTxPathA 0x1
+#define bTxPathB 0x2
+#define bTxPathC 0x4
+#define bTxPathD 0x8
+#define bTRSSIFreq 0x200
+#define bADCBackoff 0x3000
+#define bDFIRBackoff 0xc000
+#define bTRSSILatchPhase 0x10000
+#define bRxIDCOffset 0xff
+#define bRxQDCOffset 0xff00
+#define bRxDFIRMode 0x1800000
+#define bRxDCNFType 0xe000000
+#define bRXIQImb_A 0x3ff
+#define bRXIQImb_B 0xfc00
+#define bRXIQImb_C 0x3f0000
+#define bRXIQImb_D 0xffc00000
+#define bDC_dc_Notch 0x60000
+#define bRxNBINotch 0x1f000000
+#define bPD_TH 0xf
+#define bPD_TH_Opt2 0xc000
+#define bPWED_TH 0x700
+#define bIfMF_Win_L 0x800
+#define bPD_Option 0x1000
+#define bMF_Win_L 0xe000
+#define bBW_Search_L 0x30000
+#define bwin_enh_L 0xc0000
+#define bBW_TH 0x700000
+#define bED_TH2 0x3800000
+#define bBW_option 0x4000000
+#define bRatio_TH 0x18000000
+#define bWindow_L 0xe0000000
+#define bSBD_Option 0x1
+#define bFrame_TH 0x1c
+#define bFS_Option 0x60
+#define bDC_Slope_check 0x80
+#define bFGuard_Counter_DC_L 0xe00
+#define bFrame_Weight_Short 0x7000
+#define bSub_Tune 0xe00000
+#define bFrame_DC_Length 0xe000000
+#define bSBD_start_offset 0x30000000
+#define bFrame_TH_2 0x7
+#define bFrame_GI2_TH 0x38
+#define bGI2_Sync_en 0x40
+#define bSarch_Short_Early 0x300
+#define bSarch_Short_Late 0xc00
+#define bSarch_GI2_Late 0x70000
+#define bCFOAntSum 0x1
+#define bCFOAcc 0x2
+#define bCFOStartOffset 0xc
+#define bCFOLookBack 0x70
+#define bCFOSumWeight 0x80
+#define bDAGCEnable 0x10000
+#define bTXIQImb_A 0x3ff
+#define bTXIQImb_B 0xfc00
+#define bTXIQImb_C 0x3f0000
+#define bTXIQImb_D 0xffc00000
+#define bTxIDCOffset 0xff
+#define bTxQDCOffset 0xff00
+#define bTxDFIRMode 0x10000
+#define bTxPesudoNoiseOn 0x4000000
+#define bTxPesudoNoise_A 0xff
+#define bTxPesudoNoise_B 0xff00
+#define bTxPesudoNoise_C 0xff0000
+#define bTxPesudoNoise_D 0xff000000
+#define bCCADropOption 0x20000
+#define bCCADropThres 0xfff00000
+#define bEDCCA_H 0xf
+#define bEDCCA_L 0xf0
+#define bLambda_ED 0x300
+#define bRxInitialGain 0x7f
+#define bRxAntDivEn 0x80
+#define bRxAGCAddressForLNA 0x7f00
+#define bRxHighPowerFlow 0x8000
+#define bRxAGCFreezeThres 0xc0000
+#define bRxFreezeStep_AGC1 0x300000
+#define bRxFreezeStep_AGC2 0xc00000
+#define bRxFreezeStep_AGC3 0x3000000
+#define bRxFreezeStep_AGC0 0xc000000
+#define bRxRssi_Cmp_En 0x10000000
+#define bRxQuickAGCEn 0x20000000
+#define bRxAGCFreezeThresMode 0x40000000
+#define bRxOverFlowCheckType 0x80000000
+#define bRxAGCShift 0x7f
+#define bTRSW_Tri_Only 0x80
+#define bPowerThres 0x300
+#define bRxAGCEn 0x1
+#define bRxAGCTogetherEn 0x2
+#define bRxAGCMin 0x4
+#define bRxHP_Ini 0x7
+#define bRxHP_TRLNA 0x70
+#define bRxHP_RSSI 0x700
+#define bRxHP_BBP1 0x7000
+#define bRxHP_BBP2 0x70000
+#define bRxHP_BBP3 0x700000
+#define bRSSI_H 0x7f0000 /* thresh for hi power */
+#define bRSSI_Gen 0x7f000000 /* thresh for ant div */
+#define bRxSettle_TRSW 0x7
+#define bRxSettle_LNA 0x38
+#define bRxSettle_RSSI 0x1c0
+#define bRxSettle_BBP 0xe00
+#define bRxSettle_RxHP 0x7000
+#define bRxSettle_AntSW_RSSI 0x38000
+#define bRxSettle_AntSW 0xc0000
+#define bRxProcessTime_DAGC 0x300000
+#define bRxSettle_HSSI 0x400000
+#define bRxProcessTime_BBPPW 0x800000
+#define bRxAntennaPowerShift 0x3000000
+#define bRSSITableSelect 0xc000000
+#define bRxHP_Final 0x7000000
+#define bRxHTSettle_BBP 0x7
+#define bRxHTSettle_HSSI 0x8
+#define bRxHTSettle_RxHP 0x70
+#define bRxHTSettle_BBPPW 0x80
+#define bRxHTSettle_Idle 0x300
+#define bRxHTSettle_Reserved 0x1c00
+#define bRxHTRxHPEn 0x8000
+#define bRxHTAGCFreezeThres 0x30000
+#define bRxHTAGCTogetherEn 0x40000
+#define bRxHTAGCMin 0x80000
+#define bRxHTAGCEn 0x100000
+#define bRxHTDAGCEn 0x200000
+#define bRxHTRxHP_BBP 0x1c00000
+#define bRxHTRxHP_Final 0xe0000000
+#define bRxPWRatioTH 0x3
+#define bRxPWRatioEn 0x4
+#define bRxMFHold 0x3800
+#define bRxPD_Delay_TH1 0x38
+#define bRxPD_Delay_TH2 0x1c0
+#define bRxPD_DC_COUNT_MAX 0x600
+/* define bRxMF_Hold 0x3800 */
+#define bRxPD_Delay_TH 0x8000
+#define bRxProcess_Delay 0xf0000
+#define bRxSearchrange_GI2_Early 0x700000
+#define bRxFrame_Guard_Counter_L 0x3800000
+#define bRxSGI_Guard_L 0xc000000
+#define bRxSGI_Search_L 0x30000000
+#define bRxSGI_TH 0xc0000000
+#define bDFSCnt0 0xff
+#define bDFSCnt1 0xff00
+#define bDFSFlag 0xf0000
+#define bMFWeightSum 0x300000
+#define bMinIdxTH 0x7f000000
+#define bDAFormat 0x40000
+#define bTxChEmuEnable 0x01000000
+#define bTRSWIsolation_A 0x7f
+#define bTRSWIsolation_B 0x7f00
+#define bTRSWIsolation_C 0x7f0000
+#define bTRSWIsolation_D 0x7f000000
+#define bExtLNAGain 0x7c00
+
+/* 6. PageE(0xE00) */
+#define bSTBCEn 0x4 /* Useless */
+#define bAntennaMapping 0x10
+#define bNss 0x20
+#define bCFOAntSumD 0x200
+#define bPHYCounterReset 0x8000000
+#define bCFOReportGet 0x4000000
+#define bOFDMContinueTx 0x10000000
+#define bOFDMSingleCarrier 0x20000000
+#define bOFDMSingleTone 0x40000000
+/* define bRxPath1 0x01 */
+/* define bRxPath2 0x02 */
+/* define bRxPath3 0x04 */
+/* define bRxPath4 0x08 */
+/* define bTxPath1 0x10 */
+/* define bTxPath2 0x20 */
+#define bHTDetect 0x100
+#define bCFOEn 0x10000
+#define bCFOValue 0xfff00000
+#define bSigTone_Re 0x3f
+#define bSigTone_Im 0x7f00
+#define bCounter_CCA 0xffff
+#define bCounter_ParityFail 0xffff0000
+#define bCounter_RateIllegal 0xffff
+#define bCounter_CRC8Fail 0xffff0000
+#define bCounter_MCSNoSupport 0xffff
+#define bCounter_FastSync 0xffff
+#define bShortCFO 0xfff
+#define bShortCFOTLength 12 /* total */
+#define bShortCFOFLength 11 /* fraction */
+#define bLongCFO 0x7ff
+#define bLongCFOTLength 11
+#define bLongCFOFLength 11
+#define bTailCFO 0x1fff
+#define bTailCFOTLength 13
+#define bTailCFOFLength 12
+#define bmax_en_pwdB 0xffff
+#define bCC_power_dB 0xffff0000
+#define bnoise_pwdB 0xffff
+#define bPowerMeasTLength 10
+#define bPowerMeasFLength 3
+#define bRx_HT_BW 0x1
+#define bRxSC 0x6
+#define bRx_HT 0x8
+#define bNB_intf_det_on 0x1
+#define bIntf_win_len_cfg 0x30
+#define bNB_Intf_TH_cfg 0x1c0
+#define bRFGain 0x3f
+#define bTableSel 0x40
+#define bTRSW 0x80
+#define bRxSNR_A 0xff
+#define bRxSNR_B 0xff00
+#define bRxSNR_C 0xff0000
+#define bRxSNR_D 0xff000000
+#define bSNREVMTLength 8
+#define bSNREVMFLength 1
+#define bCSI1st 0xff
+#define bCSI2nd 0xff00
+#define bRxEVM1st 0xff0000
+#define bRxEVM2nd 0xff000000
+#define bSIGEVM 0xff
+#define bPWDB 0xff00
+#define bSGIEN 0x10000
+
+#define bSFactorQAM1 0xf /* Useless */
+#define bSFactorQAM2 0xf0
+#define bSFactorQAM3 0xf00
+#define bSFactorQAM4 0xf000
+#define bSFactorQAM5 0xf0000
+#define bSFactorQAM6 0xf0000
+#define bSFactorQAM7 0xf00000
+#define bSFactorQAM8 0xf000000
+#define bSFactorQAM9 0xf0000000
+#define bCSIScheme 0x100000
+
+#define bNoiseLvlTopSet 0x3 /* Useless */
+#define bChSmooth 0x4
+#define bChSmoothCfg1 0x38
+#define bChSmoothCfg2 0x1c0
+#define bChSmoothCfg3 0xe00
+#define bChSmoothCfg4 0x7000
+#define bMRCMode 0x800000
+#define bTHEVMCfg 0x7000000
+
+#define bLoopFitType 0x1 /* Useless */
+#define bUpdCFO 0x40
+#define bUpdCFOOffData 0x80
+#define bAdvUpdCFO 0x100
+#define bAdvTimeCtrl 0x800
+#define bUpdClko 0x1000
+#define bFC 0x6000
+#define bTrackingMode 0x8000
+#define bPhCmpEnable 0x10000
+#define bUpdClkoLTF 0x20000
+#define bComChCFO 0x40000
+#define bCSIEstiMode 0x80000
+#define bAdvUpdEqz 0x100000
+#define bUChCfg 0x7000000
+#define bUpdEqz 0x8000000
+
+#define bTxAGCRate18_06 0x7f7f7f7f /* Useless */
+#define bTxAGCRate54_24 0x7f7f7f7f
+#define bTxAGCRateMCS32 0x7f
+#define bTxAGCRateCCK 0x7f00
+#define bTxAGCRateMCS3_MCS0 0x7f7f7f7f
+#define bTxAGCRateMCS7_MCS4 0x7f7f7f7f
+#define bTxAGCRateMCS11_MCS8 0x7f7f7f7f
+#define bTxAGCRateMCS15_MCS12 0x7f7f7f7f
+
+/* Rx Pseduo noise */
+#define bRxPesudoNoiseOn 0x20000000 /* Useless */
+#define bRxPesudoNoise_A 0xff
+#define bRxPesudoNoise_B 0xff00
+#define bRxPesudoNoise_C 0xff0000
+#define bRxPesudoNoise_D 0xff000000
+#define bPesudoNoiseState_A 0xffff
+#define bPesudoNoiseState_B 0xffff0000
+#define bPesudoNoiseState_C 0xffff
+#define bPesudoNoiseState_D 0xffff0000
+
+/* 7. RF Register */
+/* Zebra1 */
+#define bZebra1_HSSIEnable 0x8 /* Useless */
+#define bZebra1_TRxControl 0xc00
+#define bZebra1_TRxGainSetting 0x07f
+#define bZebra1_RxCorner 0xc00
+#define bZebra1_TxChargePump 0x38
+#define bZebra1_RxChargePump 0x7
+#define bZebra1_ChannelNum 0xf80
+#define bZebra1_TxLPFBW 0x400
+#define bZebra1_RxLPFBW 0x600
+
+/* Zebra4 */
+#define bRTL8256RegModeCtrl1 0x100 /* Useless */
+#define bRTL8256RegModeCtrl0 0x40
+#define bRTL8256_TxLPFBW 0x18
+#define bRTL8256_RxLPFBW 0x600
+
+/* RTL8258 */
+#define bRTL8258_TxLPFBW 0xc /* Useless */
+#define bRTL8258_RxLPFBW 0xc00
+#define bRTL8258_RSSILPFBW 0xc0
+
+/* */
+/* Other Definition */
+/* */
+
+/* byte endable for sb_write */
+#define bByte0 0x1 /* Useless */
+#define bByte1 0x2
+#define bByte2 0x4
+#define bByte3 0x8
+#define bWord0 0x3
+#define bWord1 0xc
+#define bDWord 0xf
+
+/* for PutRegsetting & GetRegSetting BitMask */
+#define bMaskByte0 0xff /* Reg 0xc50 rOFDM0_XAAGCCore~0xC6f */
+#define bMaskByte1 0xff00
+#define bMaskByte2 0xff0000
+#define bMaskByte3 0xff000000
+#define bMaskHWord 0xffff0000
+#define bMaskLWord 0x0000ffff
+#define bMaskDWord 0xffffffff
+#define bMaskH4Bits 0xf0000000
+#define bMaskOFDM_D 0xffc00000
+#define bMaskCCK 0x3f3f3f3f
+#define bMask12Bits 0xfff
+
+/* for PutRFRegsetting & GetRFRegSetting BitMask */
+#if (RTL92SE_FPGA_VERIFY == 1)
+#define bRFRegOffsetMask 0xfff
+#else
+#define bRFRegOffsetMask 0xfffff
+#endif
+#define bEnable 0x1 /* Useless */
+#define bDisabl 0x0
+
+#define LeftAntenna 0x0 /* Useless */
+#define RightAntenna 0x1
+
+#define tCheckTxStatus 500 /* 500ms Useless */
+#define tUpdateRxCounter 100 /* 100ms */
+
+#define rateCCK 0 /* Useless */
+#define rateOFDM 1
+#define rateHT 2
+
+/* define Register-End */
+#define bPMAC_End 0x1ff /* Useless */
+#define bFPGAPHY0_End 0x8ff
+#define bFPGAPHY1_End 0x9ff
+#define bCCKPHY0_End 0xaff
+#define bOFDMPHY0_End 0xcff
+#define bOFDMPHY1_End 0xdff
+
+/* define max debug item in each debug page */
+/* define bMaxItem_FPGA_PHY0 0x9 */
+/* define bMaxItem_FPGA_PHY1 0x3 */
+/* define bMaxItem_PHY_11B 0x16 */
+/* define bMaxItem_OFDM_PHY0 0x29 */
+/* define bMaxItem_OFDM_PHY1 0x0 */
+
+#define bPMACControl 0x0 /* Useless */
+#define bWMACControl 0x1
+#define bWNICControl 0x2
+
+#define RCR_AAP BIT(0) /* accept all physical address */
+#define RCR_APM BIT(1) /* accept physical match */
+#define RCR_AM BIT(2) /* accept multicast */
+#define RCR_AB BIT(3) /* accept broadcast */
+#define RCR_ACRC32 BIT(5) /* accept error packet */
+#define RCR_9356SEL BIT(6)
+#define RCR_AICV BIT(12) /* Accept ICV error packet */
+#define RCR_RXFTH0 (BIT(13)|BIT(14)|BIT(15)) /* Rx FIFO threshold */
+#define RCR_ADF BIT(18) /* Accept Data(frame type) frame */
+#define RCR_ACF BIT(19) /* Accept control frame */
+#define RCR_AMF BIT(20) /* Accept management frame */
+#define RCR_ADD3 BIT(21)
+#define RCR_APWRMGT BIT(22) /* Accept power management packet */
+#define RCR_CBSSID BIT(23) /* Accept BSSID match packet */
+#define RCR_ENMARP BIT(28) /* enable mac auto reset phy */
+#define RCR_EnCS1 BIT(29) /* enable carrier sense method 1 */
+#define RCR_EnCS2 BIT(30) /* enable carrier sense method 2 */
+#define RCR_OnlyErlPkt BIT(31) /* Rx Early mode is performed for
+ * packet size greater than 1536 */
+
+/*--------------------------Define Parameters-------------------------------*/
+
+#endif /* __INC_HAL8192SPHYREG_H */
diff --git a/drivers/staging/r8188eu/include/rtw_p2p.h b/drivers/staging/r8188eu/include/rtw_p2p.h
new file mode 100644
index 000000000000..a3e3adc92b99
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_p2p.h
@@ -0,0 +1,135 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_P2P_H_
+#define __RTW_P2P_H_
+
+#include <drv_types.h>
+
+u32 build_beacon_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
+u32 build_probe_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
+u32 build_prov_disc_request_p2p_ie(struct wifidirect_info *pwdinfo,
+ u8 *pbuf, u8 *pssid, u8 ussidlen,
+ u8 *pdev_raddr);
+u32 build_assoc_resp_p2p_ie(struct wifidirect_info *pwdinfo,
+ u8 *pbuf, u8 status_code);
+u32 build_deauth_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
+u32 process_probe_req_p2p_ie(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u32 process_assoc_req_p2p_ie(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len, struct sta_info *psta);
+u32 process_p2p_devdisc_req(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u32 process_p2p_devdisc_resp(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_provdisc_req(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_provdisc_resp(struct wifidirect_info *pwdinfo, u8 *pframe);
+u8 process_p2p_group_negotation_req(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_group_negotation_resp(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_group_negotation_confirm(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_presence_req(struct wifidirect_info *pwdinfo, u8 *pframe,
+ uint len);
+void p2p_protocol_wk_hdl(struct adapter *padapter, int intcmdtype);
+void process_p2p_ps_ie(struct adapter *padapter, u8 *ies, u32 ielength);
+void p2p_ps_wk_hdl(struct adapter *padapter, u8 p2p_ps_state);
+u8 p2p_ps_wk_cmd(struct adapter *padapter, u8 p2p_ps_state, u8 enqueue);
+void reset_global_wifidirect_info(struct adapter *padapter);
+int rtw_init_wifi_display_info(struct adapter *padapter);
+void rtw_init_wifidirect_timers(struct adapter *padapter);
+void rtw_init_wifidirect_addrs(struct adapter *padapter, u8 *dev_addr,
+ u8 *iface_addr);
+void init_wifidirect_info(struct adapter *padapter, enum P2P_ROLE role);
+int rtw_p2p_enable(struct adapter *padapter, enum P2P_ROLE role);
+
+static inline void _rtw_p2p_set_state(struct wifidirect_info *wdinfo,
+ enum P2P_STATE state)
+{
+ if (wdinfo->p2p_state != state)
+ wdinfo->p2p_state = state;
+}
+
+static inline void _rtw_p2p_set_pre_state(struct wifidirect_info *wdinfo,
+ enum P2P_STATE state)
+{
+ if (wdinfo->pre_p2p_state != state)
+ wdinfo->pre_p2p_state = state;
+}
+
+static inline void _rtw_p2p_set_role(struct wifidirect_info *wdinfo,
+ enum P2P_ROLE role)
+{
+ if (wdinfo->role != role)
+ wdinfo->role = role;
+}
+
+static inline int _rtw_p2p_state(struct wifidirect_info *wdinfo)
+{
+ return wdinfo->p2p_state;
+}
+
+static inline int _rtw_p2p_pre_state(struct wifidirect_info *wdinfo)
+{
+ return wdinfo->pre_p2p_state;
+}
+
+static inline int _rtw_p2p_role(struct wifidirect_info *wdinfo)
+{
+ return wdinfo->role;
+}
+
+static inline bool _rtw_p2p_chk_state(struct wifidirect_info *wdinfo,
+ enum P2P_STATE state)
+{
+ return wdinfo->p2p_state == state;
+}
+
+static inline bool _rtw_p2p_chk_role(struct wifidirect_info *wdinfo,
+ enum P2P_ROLE role)
+{
+ return wdinfo->role == role;
+}
+
+#define rtw_p2p_set_state(wdinfo, state) _rtw_p2p_set_state(wdinfo, state)
+#define rtw_p2p_set_pre_state(wdinfo, state) \
+ _rtw_p2p_set_pre_state(wdinfo, state)
+#define rtw_p2p_set_role(wdinfo, role) _rtw_p2p_set_role(wdinfo, role)
+
+#define rtw_p2p_state(wdinfo) _rtw_p2p_state(wdinfo)
+#define rtw_p2p_pre_state(wdinfo) _rtw_p2p_pre_state(wdinfo)
+#define rtw_p2p_role(wdinfo) _rtw_p2p_role(wdinfo)
+#define rtw_p2p_chk_state(wdinfo, state) _rtw_p2p_chk_state(wdinfo, state)
+#define rtw_p2p_chk_role(wdinfo, role) _rtw_p2p_chk_role(wdinfo, role)
+
+#define rtw_p2p_findphase_ex_set(wdinfo, value) \
+ ((wdinfo)->find_phase_state_exchange_cnt = (value))
+
+/* is this find phase exchange for social channel scan? */
+#define rtw_p2p_findphase_ex_is_social(wdinfo) \
+((wdinfo)->find_phase_state_exchange_cnt >= P2P_FINDPHASE_EX_SOCIAL_FIRST)
+
+/* should we need find phase exchange anymore? */
+#define rtw_p2p_findphase_ex_is_needed(wdinfo) \
+ ((wdinfo)->find_phase_state_exchange_cnt < P2P_FINDPHASE_EX_MAX && \
+ (wdinfo)->find_phase_state_exchange_cnt != P2P_FINDPHASE_EX_NONE)
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_pwrctrl.h b/drivers/staging/r8188eu/include/rtw_pwrctrl.h
new file mode 100644
index 000000000000..3db33cd9fee7
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_pwrctrl.h
@@ -0,0 +1,282 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_PWRCTRL_H_
+#define __RTW_PWRCTRL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define FW_PWR0 0
+#define FW_PWR1 1
+#define FW_PWR2 2
+#define FW_PWR3 3
+#define HW_PWR0 7
+#define HW_PWR1 6
+#define HW_PWR2 2
+#define HW_PWR3 0
+#define HW_PWR4 8
+
+#define FW_PWRMSK 0x7
+
+#define XMIT_ALIVE BIT(0)
+#define RECV_ALIVE BIT(1)
+#define CMD_ALIVE BIT(2)
+#define EVT_ALIVE BIT(3)
+
+enum power_mgnt {
+ PS_MODE_ACTIVE = 0,
+ PS_MODE_MIN,
+ PS_MODE_MAX,
+ PS_MODE_DTIM,
+ PS_MODE_VOIP,
+ PS_MODE_UAPSD_WMM,
+ PS_MODE_UAPSD,
+ PS_MODE_IBSS,
+ PS_MODE_WWLAN,
+ PM_Radio_Off,
+ PM_Card_Disable,
+ PS_MODE_NUM
+};
+
+/*
+ BIT[2:0] = HW state
+ BIT[3] = Protocol PS state, 0: register active state,
+ 1: register sleep state
+ BIT[4] = sub-state
+*/
+
+#define PS_DPS BIT(0)
+#define PS_LCLK (PS_DPS)
+#define PS_RF_OFF BIT(1)
+#define PS_ALL_ON BIT(2)
+#define PS_ST_ACTIVE BIT(3)
+
+#define PS_ISR_ENABLE BIT(4)
+#define PS_IMR_ENABLE BIT(5)
+#define PS_ACK BIT(6)
+#define PS_TOGGLE BIT(7)
+
+#define PS_STATE_MASK (0x0F)
+#define PS_STATE_HW_MASK (0x07)
+#define PS_SEQ_MASK (0xc0)
+
+#define PS_STATE(x) (PS_STATE_MASK & (x))
+#define PS_STATE_HW(x) (PS_STATE_HW_MASK & (x))
+#define PS_SEQ(x) (PS_SEQ_MASK & (x))
+
+#define PS_STATE_S0 (PS_DPS)
+#define PS_STATE_S1 (PS_LCLK)
+#define PS_STATE_S2 (PS_RF_OFF)
+#define PS_STATE_S3 (PS_ALL_ON)
+#define PS_STATE_S4 ((PS_ST_ACTIVE) | (PS_ALL_ON))
+
+#define PS_IS_RF_ON(x) ((x) & (PS_ALL_ON))
+#define PS_IS_ACTIVE(x) ((x) & (PS_ST_ACTIVE))
+#define CLR_PS_STATE(x) ((x) = ((x) & (0xF0)))
+
+struct reportpwrstate_parm {
+ unsigned char mode;
+ unsigned char state; /* the CPWM value */
+ unsigned short rsvd;
+};
+
+static inline void _init_pwrlock(struct semaphore *plock)
+{
+ sema_init(plock, 1);
+}
+
+static inline void _free_pwrlock(struct semaphore *plock)
+{
+}
+
+static inline void _enter_pwrlock(struct semaphore *plock)
+{
+ _rtw_down_sema(plock);
+}
+
+static inline void _exit_pwrlock(struct semaphore *plock)
+{
+ up(plock);
+}
+
+#define LPS_DELAY_TIME 1*HZ /* 1 sec */
+
+#define EXE_PWR_NONE 0x01
+#define EXE_PWR_IPS 0x02
+#define EXE_PWR_LPS 0x04
+
+/* RF state. */
+enum rt_rf_power_state {
+ rf_on, /* RF is on after RFSleep or RFOff */
+ rf_sleep, /* 802.11 Power Save mode */
+ rf_off, /* HW/SW Radio OFF or Inactive Power Save */
+ /* Add the new RF state above this line===== */
+ rf_max
+};
+
+/* RF Off Level for IPS or HW/SW radio off */
+#define RT_RF_OFF_LEVL_ASPM BIT(0) /* PCI ASPM */
+#define RT_RF_OFF_LEVL_CLK_REQ BIT(1) /* PCI clock request */
+#define RT_RF_OFF_LEVL_PCI_D3 BIT(2) /* PCI D3 mode */
+#define RT_RF_OFF_LEVL_HALT_NIC BIT(3) /* NIC halt, re-init hw param*/
+#define RT_RF_OFF_LEVL_FREE_FW BIT(4) /* FW free, re-download the FW*/
+#define RT_RF_OFF_LEVL_FW_32K BIT(5) /* FW in 32k */
+#define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT(6) /* Always enable ASPM and Clock
+ * Req in initialization. */
+#define RT_RF_LPS_DISALBE_2R BIT(30) /* When LPS is on, disable 2R
+ * if no packet is RX or TX. */
+#define RT_RF_LPS_LEVEL_ASPM BIT(31) /* LPS with ASPM */
+
+#define RT_IN_PS_LEVEL(ppsc, _PS_FLAG) \
+ ((ppsc->cur_ps_level & _PS_FLAG) ? true : false)
+#define RT_CLEAR_PS_LEVEL(ppsc, _PS_FLAG) \
+ (ppsc->cur_ps_level &= (~(_PS_FLAG)))
+#define RT_SET_PS_LEVEL(ppsc, _PS_FLAG) \
+ (ppsc->cur_ps_level |= _PS_FLAG)
+
+enum _PS_BBRegBackup_ {
+ PSBBREG_RF0 = 0,
+ PSBBREG_RF1,
+ PSBBREG_RF2,
+ PSBBREG_AFE0,
+ PSBBREG_TOTALCNT
+};
+
+enum { /* for ips_mode */
+ IPS_NONE = 0,
+ IPS_NORMAL,
+ IPS_LEVEL_2,
+};
+
+struct pwrctrl_priv {
+ struct semaphore lock;
+ volatile u8 rpwm; /* requested power state for fw */
+ volatile u8 cpwm; /* fw current power state. updated when
+ * 1. read from HCPWM 2. driver lowers power level */
+ volatile u8 tog; /* toggling */
+ volatile u8 cpwm_tog; /* toggling */
+
+ u8 pwr_mode;
+ u8 smart_ps;
+ u8 bcn_ant_mode;
+
+ u32 alives;
+ struct work_struct cpwm_event;
+ u8 bpower_saving;
+
+ u8 b_hw_radio_off;
+ u8 reg_rfoff;
+ u8 reg_pdnmode; /* powerdown mode */
+ u32 rfoff_reason;
+
+ /* RF OFF Level */
+ u32 cur_ps_level;
+ u32 reg_rfps_level;
+ uint ips_enter_cnts;
+ uint ips_leave_cnts;
+
+ u8 ips_mode;
+ u8 ips_mode_req; /* used to accept the mode setting request,
+ * will update to ipsmode later */
+ uint bips_processing;
+ u32 ips_deny_time; /* will deny IPS when system time less than this */
+ u8 ps_processing; /* temp used to mark whether in rtw_ps_processor */
+
+ u8 bLeisurePs;
+ u8 LpsIdleCount;
+ u8 power_mgnt;
+ u8 bFwCurrentInPSMode;
+ u32 DelayLPSLastTimeStamp;
+ u8 btcoex_rfon;
+ s32 pnp_current_pwr_state;
+ u8 pnp_bstop_trx;
+
+ u8 bInternalAutoSuspend;
+ u8 bInSuspend;
+#ifdef CONFIG_BT_COEXIST
+ u8 bAutoResume;
+ u8 autopm_cnt;
+#endif
+ u8 bSupportRemoteWakeup;
+ struct timer_list pwr_state_check_timer;
+ int pwr_state_check_interval;
+ u8 pwr_state_check_cnts;
+
+ int ps_flag;
+
+ enum rt_rf_power_state rf_pwrstate;/* cur power state */
+ enum rt_rf_power_state change_rfpwrstate;
+
+ u8 wepkeymask;
+ u8 bHWPowerdown;/* if support hw power down */
+ u8 bHWPwrPindetect;
+ u8 bkeepfwalive;
+ u8 brfoffbyhw;
+ unsigned long PS_BBRegBackup[PSBBREG_TOTALCNT];
+};
+
+#define rtw_get_ips_mode_req(pwrctrlpriv) \
+ (pwrctrlpriv)->ips_mode_req
+
+#define rtw_ips_mode_req(pwrctrlpriv, ips_mode) \
+ ((pwrctrlpriv)->ips_mode_req = (ips_mode))
+
+#define RTW_PWR_STATE_CHK_INTERVAL 2000
+
+#define _rtw_set_pwr_state_check_timer(pwrctrlpriv, ms) \
+ do { \
+ _set_timer(&(pwrctrlpriv)->pwr_state_check_timer, (ms)); \
+ } while (0)
+
+#define rtw_set_pwr_state_check_timer(pwrctrl) \
+ _rtw_set_pwr_state_check_timer((pwrctrl), \
+ (pwrctrl)->pwr_state_check_interval)
+
+void rtw_init_pwrctrl_priv(struct adapter *adapter);
+void rtw_free_pwrctrl_priv(struct adapter *adapter);
+
+void rtw_set_ps_mode(struct adapter *adapter, u8 ps_mode, u8 smart_ps,
+ u8 bcn_ant_mode);
+void rtw_set_rpwm(struct adapter *adapter, u8 val8);
+void LeaveAllPowerSaveMode(struct adapter *adapter);
+void ips_enter(struct adapter *padapter);
+int ips_leave(struct adapter *padapter);
+
+void rtw_ps_processor(struct adapter *padapter);
+
+enum rt_rf_power_state RfOnOffDetect(struct adapter *iadapter);
+
+s32 LPS_RF_ON_check(struct adapter *adapter, u32 delay_ms);
+void LPS_Enter(struct adapter *adapter);
+void LPS_Leave(struct adapter *adapter);
+
+u8 rtw_interface_ps_func(struct adapter *adapter,
+ enum hal_intf_ps_func efunc_id, u8 *val);
+void rtw_set_ips_deny(struct adapter *adapter, u32 ms);
+int _rtw_pwr_wakeup(struct adapter *adapter, u32 ips_defer_ms,
+ const char *caller);
+#define rtw_pwr_wakeup(adapter) \
+ _rtw_pwr_wakeup(adapter, RTW_PWR_STATE_CHK_INTERVAL, __func__)
+#define rtw_pwr_wakeup_ex(adapter, ips_deffer_ms) \
+ _rtw_pwr_wakeup(adapter, ips_deffer_ms, __func__)
+int rtw_pm_set_ips(struct adapter *adapter, u8 mode);
+int rtw_pm_set_lps(struct adapter *adapter, u8 mode);
+
+#endif /* __RTL871X_PWRCTRL_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_qos.h b/drivers/staging/r8188eu/include/rtw_qos.h
new file mode 100644
index 000000000000..bbee1ddc00bb
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_qos.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_QOS_H_
+#define _RTW_QOS_H_
+
+#include <osdep_service.h>
+
+struct qos_priv {
+ unsigned int qos_option; /* bit mask option: u-apsd,
+ * s-apsd, ts, block ack... */
+};
+
+#endif /* _RTL871X_QOS_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_recv.h b/drivers/staging/r8188eu/include/rtw_recv.h
new file mode 100644
index 000000000000..bc097ed7f966
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_recv.h
@@ -0,0 +1,473 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_RECV_H_
+#define _RTW_RECV_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define NR_RECVFRAME 256
+
+#define RXFRAME_ALIGN 8
+#define RXFRAME_ALIGN_SZ (1<<RXFRAME_ALIGN)
+
+#define MAX_RXFRAME_CNT 512
+#define MAX_RX_NUMBLKS (32)
+#define RECVFRAME_HDR_ALIGN 128
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define MAX_SUBFRAME_COUNT 64
+
+/* for Rx reordering buffer control */
+struct recv_reorder_ctrl {
+ struct adapter *padapter;
+ u8 enable;
+ u16 indicate_seq;/* wstart_b, init_value=0xffff */
+ u16 wend_b;
+ u8 wsize_b;
+ struct __queue pending_recvframe_queue;
+ struct timer_list reordering_ctrl_timer;
+};
+
+struct stainfo_rxcache {
+ u16 tid_rxseq[16];
+/*
+ unsigned short tid0_rxseq;
+ unsigned short tid1_rxseq;
+ unsigned short tid2_rxseq;
+ unsigned short tid3_rxseq;
+ unsigned short tid4_rxseq;
+ unsigned short tid5_rxseq;
+ unsigned short tid6_rxseq;
+ unsigned short tid7_rxseq;
+ unsigned short tid8_rxseq;
+ unsigned short tid9_rxseq;
+ unsigned short tid10_rxseq;
+ unsigned short tid11_rxseq;
+ unsigned short tid12_rxseq;
+ unsigned short tid13_rxseq;
+ unsigned short tid14_rxseq;
+ unsigned short tid15_rxseq;
+*/
+};
+
+struct smooth_rssi_data {
+ u32 elements[100]; /* array to store values */
+ u32 index; /* index to current array to store */
+ u32 total_num; /* num of valid elements */
+ u32 total_val; /* sum of valid elements */
+};
+
+struct signal_stat {
+ u8 update_req; /* used to indicate */
+ u8 avg_val; /* avg of valid elements */
+ u32 total_num; /* num of valid elements */
+ u32 total_val; /* sum of valid elements */
+};
+#define MAX_PATH_NUM_92CS 3
+struct phy_info {
+ u8 RxPWDBAll;
+ u8 SignalQuality; /* in 0-100 index. */
+ u8 RxMIMOSignalQuality[MAX_PATH_NUM_92CS]; /* EVM */
+ u8 RxMIMOSignalStrength[MAX_PATH_NUM_92CS];/* in 0~100 index */
+ s8 RxPower; /* in dBm Translate from PWdB */
+/* Real power in dBm for this packet, no beautification and aggregation.
+ * Keep this raw info to be used for the other procedures. */
+ s8 recvpower;
+ u8 BTRxRSSIPercentage;
+ u8 SignalStrength; /* in 0-100 index. */
+ u8 RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */
+ u8 RxSNR[MAX_PATH_NUM_92CS];/* per-path's SNR */
+};
+
+struct rx_pkt_attrib {
+ u16 pkt_len;
+ u8 physt;
+ u8 drvinfo_sz;
+ u8 shift_sz;
+ u8 hdrlen; /* the WLAN Header Len */
+ u8 to_fr_ds;
+ u8 amsdu;
+ u8 qos;
+ u8 priority;
+ u8 pw_save;
+ u8 mdata;
+ u16 seq_num;
+ u8 frag_num;
+ u8 mfrag;
+ u8 order;
+ u8 privacy; /* in frame_ctrl field */
+ u8 bdecrypted;
+ u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
+ * indicate the encrypt algorith */
+ u8 iv_len;
+ u8 icv_len;
+ u8 crc_err;
+ u8 icv_err;
+
+ u16 eth_type;
+
+ u8 dst[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ u8 ta[ETH_ALEN];
+ u8 ra[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+
+ u8 ack_policy;
+
+ u8 key_index;
+
+ u8 mcs_rate;
+ u8 rxht;
+ u8 sgi;
+ u8 pkt_rpt_type;
+ u32 MacIDValidEntry[2]; /* 64 bits present 64 entry. */
+
+ struct phy_info phy_info;
+};
+
+/* These definition is used for Rx packet reordering. */
+#define SN_LESS(a, b) (((a - b) & 0x800) != 0)
+#define SN_EQUAL(a, b) (a == b)
+#define REORDER_WAIT_TIME (50) /* (ms) */
+
+#define RECVBUFF_ALIGN_SZ 8
+
+#define RXDESC_SIZE 24
+#define RXDESC_OFFSET RXDESC_SIZE
+
+struct recv_stat {
+ __le32 rxdw0;
+ __le32 rxdw1;
+ __le32 rxdw2;
+ __le32 rxdw3;
+ __le32 rxdw4;
+ __le32 rxdw5;
+};
+
+#define EOR BIT(30)
+
+/*
+accesser of recv_priv: rtw_recv_entry(dispatch / passive level);
+recv_thread(passive) ; returnpkt(dispatch)
+; halt(passive) ;
+
+using enter_critical section to protect
+*/
+struct recv_priv {
+ spinlock_t lock;
+ struct __queue free_recv_queue;
+ struct __queue recv_pending_queue;
+ struct __queue uc_swdec_pending_queue;
+ u8 *pallocated_frame_buf;
+ u8 *precv_frame_buf;
+ uint free_recvframe_cnt;
+ struct adapter *adapter;
+ u32 bIsAnyNonBEPkts;
+ u64 rx_bytes;
+ u64 rx_pkts;
+ u64 rx_drop;
+ u64 last_rx_bytes;
+
+ uint rx_icv_err;
+ uint rx_largepacket_crcerr;
+ uint rx_smallpacket_crcerr;
+ uint rx_middlepacket_crcerr;
+ struct semaphore allrxreturnevt;
+ uint ff_hwaddr;
+ u8 rx_pending_cnt;
+
+ struct tasklet_struct irq_prepare_beacon_tasklet;
+ struct tasklet_struct recv_tasklet;
+ struct sk_buff_head free_recv_skb_queue;
+ struct sk_buff_head rx_skb_queue;
+ u8 *pallocated_recv_buf;
+ u8 *precv_buf; /* 4 alignment */
+ struct __queue free_recv_buf_queue;
+ u32 free_recv_buf_queue_cnt;
+ /* For display the phy informatiom */
+ u8 is_signal_dbg; /* for debug */
+ u8 signal_strength_dbg; /* for debug */
+ s8 rssi;
+ s8 rxpwdb;
+ u8 signal_strength;
+ u8 signal_qual;
+ u8 noise;
+ int RxSNRdB[2];
+ s8 RxRssi[2];
+ int FalseAlmCnt_all;
+
+ struct timer_list signal_stat_timer;
+ u32 signal_stat_sampling_interval;
+ struct signal_stat signal_qual_data;
+ struct signal_stat signal_strength_data;
+};
+
+#define rtw_set_signal_stat_timer(recvpriv) \
+ _set_timer(&(recvpriv)->signal_stat_timer, \
+ (recvpriv)->signal_stat_sampling_interval)
+
+struct sta_recv_priv {
+ spinlock_t lock;
+ int option;
+ struct __queue defrag_q; /* keeping the fragment frame until defrag */
+ struct stainfo_rxcache rxcache;
+};
+
+struct recv_buf {
+ struct list_head list;
+ spinlock_t recvbuf_lock;
+ u32 ref_cnt;
+ struct adapter *adapter;
+ u8 *pbuf;
+ u8 *pallocated_buf;
+ u32 len;
+ u8 *phead;
+ u8 *pdata;
+ u8 *ptail;
+ u8 *pend;
+ struct urb *purb;
+ dma_addr_t dma_transfer_addr; /* (in) dma addr for transfer_buffer */
+ u32 alloc_sz;
+ u8 irp_pending;
+ int transfer_len;
+ struct sk_buff *pskb;
+ u8 reuse;
+};
+
+/*
+ head ----->
+
+ data ----->
+
+ payload
+
+ tail ----->
+
+ end ----->
+
+ len = (unsigned int )(tail - data);
+
+*/
+struct recv_frame {
+ struct list_head list;
+ struct sk_buff *pkt;
+ struct sk_buff *pkt_newalloc;
+ struct adapter *adapter;
+ u8 fragcnt;
+ int frame_tag;
+ struct rx_pkt_attrib attrib;
+ uint len;
+ u8 *rx_head;
+ u8 *rx_data;
+ u8 *rx_tail;
+ u8 *rx_end;
+ void *precvbuf;
+ struct sta_info *psta;
+ /* for A-MPDU Rx reordering buffer control */
+ struct recv_reorder_ctrl *preorder_ctrl;
+};
+
+struct recv_frame *_rtw_alloc_recvframe(struct __queue *pfree_recv_queue);
+struct recv_frame *rtw_alloc_recvframe(struct __queue *pfree_recv_queue);
+void rtw_init_recvframe(struct recv_frame *precvframe,
+ struct recv_priv *precvpriv);
+int rtw_free_recvframe(struct recv_frame *precvframe,
+ struct __queue *pfree_recv_queue);
+#define rtw_dequeue_recvframe(queue) rtw_alloc_recvframe(queue)
+int _rtw_enqueue_recvframe(struct recv_frame *precvframe, struct __queue *queue);
+int rtw_enqueue_recvframe(struct recv_frame *precvframe, struct __queue *queue);
+void rtw_free_recvframe_queue(struct __queue *pframequeue,
+ struct __queue *pfree_recv_queue);
+u32 rtw_free_uc_swdec_pending_queue(struct adapter *adapter);
+int rtw_enqueue_recvbuf_to_head(struct recv_buf *buf, struct __queue *queue);
+int rtw_enqueue_recvbuf(struct recv_buf *precvbuf, struct __queue *queue);
+struct recv_buf *rtw_dequeue_recvbuf(struct __queue *queue);
+
+void rtw_reordering_ctrl_timeout_handler(void *pcontext);
+
+static inline u8 *get_rxmem(struct recv_frame *precvframe)
+{
+ /* always return rx_head... */
+ if (precvframe == NULL)
+ return NULL;
+ return precvframe->rx_head;
+}
+
+static inline u8 *get_rx_status(struct recv_frame *precvframe)
+{
+ return get_rxmem(precvframe);
+}
+
+static inline u8 *get_recvframe_data(struct recv_frame *precvframe)
+{
+ /* always return rx_data */
+ if (precvframe == NULL)
+ return NULL;
+
+ return precvframe->rx_data;
+}
+
+static inline u8 *recvframe_push(struct recv_frame *precvframe, int sz)
+{
+ /* append data before rx_data */
+
+ /* add data to the start of recv_frame
+ *
+ * This function extends the used data area of the recv_frame at the buffer
+ * start. rx_data must be still larger than rx_head, after pushing.
+ */
+ if (precvframe == NULL)
+ return NULL;
+ precvframe->rx_data -= sz ;
+ if (precvframe->rx_data < precvframe->rx_head) {
+ precvframe->rx_data += sz;
+ return NULL;
+ }
+ precvframe->len += sz;
+ return precvframe->rx_data;
+}
+
+static inline u8 *recvframe_pull(struct recv_frame *precvframe, int sz)
+{
+ /* rx_data += sz; move rx_data sz bytes hereafter */
+
+ /* used for extract sz bytes from rx_data, update rx_data and return
+ * the updated rx_data to the caller */
+
+ if (precvframe == NULL)
+ return NULL;
+ precvframe->rx_data += sz;
+ if (precvframe->rx_data > precvframe->rx_tail) {
+ precvframe->rx_data -= sz;
+ return NULL;
+ }
+ precvframe->len -= sz;
+ return precvframe->rx_data;
+}
+
+static inline u8 *recvframe_put(struct recv_frame *precvframe, int sz)
+{
+ /* used for append sz bytes from ptr to rx_tail, update rx_tail
+ * and return the updated rx_tail to the caller */
+ /* after putting, rx_tail must be still larger than rx_end. */
+
+ if (precvframe == NULL)
+ return NULL;
+
+ precvframe->rx_tail += sz;
+
+ if (precvframe->rx_tail > precvframe->rx_end) {
+ precvframe->rx_tail -= sz;
+ return NULL;
+ }
+ precvframe->len += sz;
+ return precvframe->rx_tail;
+}
+
+static inline u8 *recvframe_pull_tail(struct recv_frame *precvframe, int sz)
+{
+ /* rmv data from rx_tail (by yitsen) */
+
+ /* used for extract sz bytes from rx_end, update rx_end and return
+ * the updated rx_end to the caller */
+ /* after pulling, rx_end must be still larger than rx_data. */
+
+ if (precvframe == NULL)
+ return NULL;
+ precvframe->rx_tail -= sz;
+ if (precvframe->rx_tail < precvframe->rx_data) {
+ precvframe->rx_tail += sz;
+ return NULL;
+ }
+ precvframe->len -= sz;
+ return precvframe->rx_tail;
+}
+
+static inline unsigned char *get_rxbuf_desc(struct recv_frame *precvframe)
+{
+ unsigned char *buf_desc;
+
+ if (precvframe == NULL)
+ return NULL;
+ return buf_desc;
+}
+
+static inline struct recv_frame *rxmem_to_recvframe(u8 *rxmem)
+{
+ /* due to the design of 2048 bytes alignment of recv_frame,
+ * we can reference the struct recv_frame */
+ /* from any given member of recv_frame. */
+ /* rxmem indicates the any member/address in recv_frame */
+
+ return (struct recv_frame *)(((size_t)rxmem >> RXFRAME_ALIGN) << RXFRAME_ALIGN);
+}
+
+static inline struct recv_frame *pkt_to_recvframe(struct sk_buff *pkt)
+{
+ u8 *buf_star;
+ struct recv_frame *precv_frame;
+ precv_frame = rxmem_to_recvframe((unsigned char *)buf_star);
+
+ return precv_frame;
+}
+
+static inline u8 *pkt_to_recvmem(struct sk_buff *pkt)
+{
+ /* return the rx_head */
+
+ struct recv_frame *precv_frame = pkt_to_recvframe(pkt);
+
+ return precv_frame->rx_head;
+}
+
+static inline u8 *pkt_to_recvdata(struct sk_buff *pkt)
+{
+ /* return the rx_data */
+
+ struct recv_frame *precv_frame = pkt_to_recvframe(pkt);
+
+ return precv_frame->rx_data;
+}
+
+static inline int get_recvframe_len(struct recv_frame *precvframe)
+{
+ return precvframe->len;
+}
+
+static inline s32 translate_percentage_to_dbm(u32 sig_stren_index)
+{
+ s32 power; /* in dBm. */
+
+ /* Translate to dBm (x=0.5y-95). */
+ power = (s32)((sig_stren_index + 1) >> 1);
+ power -= 95;
+
+ return power;
+}
+
+struct sta_info;
+
+void _rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv);
+
+void mgt_dispatcher(struct adapter *padapter, struct recv_frame *precv_frame);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_rf.h b/drivers/staging/r8188eu/include/rtw_rf.h
new file mode 100644
index 000000000000..d4415e8115b2
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_rf.h
@@ -0,0 +1,145 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_RF_H_
+#define __RTW_RF_H_
+
+#include <rtw_cmd.h>
+
+#define OFDM_PHY 1
+#define MIXED_PHY 2
+#define CCK_PHY 3
+
+#define NumRates (13)
+
+/* slot time for 11g */
+#define SHORT_SLOT_TIME 9
+#define NON_SHORT_SLOT_TIME 20
+
+#define RTL8711_RF_MAX_SENS 6
+#define RTL8711_RF_DEF_SENS 4
+
+/* We now define the following channels as the max channels in each
+ * channel plan. */
+/* 2G, total 14 chnls */
+/* {1,2,3,4,5,6,7,8,9,10,11,12,13,14} */
+#define MAX_CHANNEL_NUM_2G 14
+#define MAX_CHANNEL_NUM 14 /* 2.4 GHz only */
+
+#define NUM_REGULATORYS 1
+
+/* Country codes */
+#define USA 0x555320
+#define EUROPE 0x1 /* temp, should be provided later */
+#define JAPAN 0x2 /* temp, should be provided later */
+
+struct regulatory_class {
+ u32 starting_freq; /* MHz, */
+ u8 channel_set[MAX_CHANNEL_NUM];
+ u8 channel_cck_power[MAX_CHANNEL_NUM]; /* dbm */
+ u8 channel_ofdm_power[MAX_CHANNEL_NUM]; /* dbm */
+ u8 txpower_limit; /* dbm */
+ u8 channel_spacing; /* MHz */
+ u8 modem;
+};
+
+enum capability {
+ cESS = 0x0001,
+ cIBSS = 0x0002,
+ cPollable = 0x0004,
+ cPollReq = 0x0008,
+ cPrivacy = 0x0010,
+ cShortPreamble = 0x0020,
+ cPBCC = 0x0040,
+ cChannelAgility = 0x0080,
+ cSpectrumMgnt = 0x0100,
+ cQos = 0x0200, /* For HCCA, use with CF-Pollable
+ * and CF-PollReq */
+ cShortSlotTime = 0x0400,
+ cAPSD = 0x0800,
+ cRM = 0x1000, /* RRM (Radio Request Measurement) */
+ cDSSS_OFDM = 0x2000,
+ cDelayedBA = 0x4000,
+ cImmediateBA = 0x8000,
+};
+
+enum _REG_PREAMBLE_MODE {
+ PREAMBLE_LONG = 1,
+ PREAMBLE_AUTO = 2,
+ PREAMBLE_SHORT = 3,
+};
+
+enum _RTL8712_RF_MIMO_CONFIG_ {
+ RTL8712_RFCONFIG_1T = 0x10,
+ RTL8712_RFCONFIG_2T = 0x20,
+ RTL8712_RFCONFIG_1R = 0x01,
+ RTL8712_RFCONFIG_2R = 0x02,
+ RTL8712_RFCONFIG_1T1R = 0x11,
+ RTL8712_RFCONFIG_1T2R = 0x12,
+ RTL8712_RFCONFIG_TURBO = 0x92,
+ RTL8712_RFCONFIG_2T2R = 0x22
+};
+
+enum rf90_radio_path {
+ RF90_PATH_A = 0, /* Radio Path A */
+ RF90_PATH_B = 1, /* Radio Path B */
+ RF90_PATH_C = 2, /* Radio Path C */
+ RF90_PATH_D = 3 /* Radio Path D */
+};
+
+/* Bandwidth Offset */
+#define HAL_PRIME_CHNL_OFFSET_DONT_CARE 0
+#define HAL_PRIME_CHNL_OFFSET_LOWER 1
+#define HAL_PRIME_CHNL_OFFSET_UPPER 2
+
+/* Represent Channel Width in HT Capabilities */
+/* */
+enum ht_channel_width {
+ HT_CHANNEL_WIDTH_20 = 0,
+ HT_CHANNEL_WIDTH_40 = 1,
+ HT_CHANNEL_WIDTH_80 = 2,
+ HT_CHANNEL_WIDTH_160 = 3,
+ HT_CHANNEL_WIDTH_10 = 4,
+};
+
+/* */
+/* Represent Extension Channel Offset in HT Capabilities */
+/* This is available only in 40Mhz mode. */
+/* */
+enum ht_extchnl_offset {
+ HT_EXTCHNL_OFFSET_NO_EXT = 0,
+ HT_EXTCHNL_OFFSET_UPPER = 1,
+ HT_EXTCHNL_OFFSET_NO_DEF = 2,
+ HT_EXTCHNL_OFFSET_LOWER = 3,
+};
+
+/* 2007/11/15 MH Define different RF type. */
+enum rt_rf_type_def {
+ RF_1T2R = 0,
+ RF_2T4R = 1,
+ RF_2T2R = 2,
+ RF_1T1R = 3,
+ RF_2T2R_GREEN = 4,
+ RF_819X_MAX_TYPE = 5,
+};
+
+u32 rtw_ch2freq(u32 ch);
+u32 rtw_freq2ch(u32 freq);
+
+#endif /* _RTL8711_RF_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_security.h b/drivers/staging/r8188eu/include/rtw_security.h
new file mode 100644
index 000000000000..c720ed1117db
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_security.h
@@ -0,0 +1,382 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_SECURITY_H_
+#define __RTW_SECURITY_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define _NO_PRIVACY_ 0x0
+#define _WEP40_ 0x1
+#define _TKIP_ 0x2
+#define _TKIP_WTMIC_ 0x3
+#define _AES_ 0x4
+#define _WEP104_ 0x5
+#define _WEP_WPA_MIXED_ 0x07 /* WEP + WPA */
+#define _SMS4_ 0x06
+
+#define is_wep_enc(alg) (((alg) == _WEP40_) || ((alg) == _WEP104_))
+
+#define _WPA_IE_ID_ 0xdd
+#define _WPA2_IE_ID_ 0x30
+
+#define SHA256_MAC_LEN 32
+#define AES_BLOCK_SIZE 16
+#define AES_PRIV_SIZE (4 * 44)
+
+enum {
+ ENCRYP_PROTOCOL_OPENSYS, /* open system */
+ ENCRYP_PROTOCOL_WEP, /* WEP */
+ ENCRYP_PROTOCOL_WPA, /* WPA */
+ ENCRYP_PROTOCOL_WPA2, /* WPA2 */
+ ENCRYP_PROTOCOL_WAPI, /* WAPI: Not support in this version */
+ ENCRYP_PROTOCOL_MAX
+};
+
+#ifndef Ndis802_11AuthModeWPA2
+#define Ndis802_11AuthModeWPA2 (Ndis802_11AuthModeWPANone + 1)
+#endif
+
+#ifndef Ndis802_11AuthModeWPA2PSK
+#define Ndis802_11AuthModeWPA2PSK (Ndis802_11AuthModeWPANone + 2)
+#endif
+
+union pn48 {
+ u64 val;
+
+#ifdef __LITTLE_ENDIAN
+ struct {
+ u8 TSC0;
+ u8 TSC1;
+ u8 TSC2;
+ u8 TSC3;
+ u8 TSC4;
+ u8 TSC5;
+ u8 TSC6;
+ u8 TSC7;
+ } _byte_;
+
+#elif defined(__BIG_ENDIAN)
+
+ struct {
+ u8 TSC7;
+ u8 TSC6;
+ u8 TSC5;
+ u8 TSC4;
+ u8 TSC3;
+ u8 TSC2;
+ u8 TSC1;
+ u8 TSC0;
+ } _byte_;
+#endif
+};
+
+union Keytype {
+ u8 skey[16];
+ u32 lkey[4];
+};
+
+struct rt_pmkid_list {
+ u8 bUsed;
+ u8 Bssid[6];
+ u8 PMKID[16];
+ u8 SsidBuf[33];
+ u8 *ssid_octet;
+ u16 ssid_length;
+};
+
+struct security_priv {
+ u32 dot11AuthAlgrthm; /* 802.11 auth, could be open,
+ * shared, 8021x and authswitch */
+ u32 dot11PrivacyAlgrthm; /* This specify the privacy for
+ * shared auth. algorithm. */
+ /* WEP */
+ u32 dot11PrivacyKeyIndex; /* this is only valid for legendary
+ * wep, 0~3 for key id.(tx key index) */
+ union Keytype dot11DefKey[4]; /* this is only valid for def. key */
+ u32 dot11DefKeylen[4];
+ u32 dot118021XGrpPrivacy; /* This specify the privacy algthm.
+ * used for Grp key */
+ u32 dot118021XGrpKeyid; /* key id used for Grp Key
+ * ( tx key index) */
+ union Keytype dot118021XGrpKey[4]; /* 802.1x Group Key,
+ * for inx0 and inx1 */
+ union Keytype dot118021XGrptxmickey[4];
+ union Keytype dot118021XGrprxmickey[4];
+ union pn48 dot11Grptxpn; /* PN48 used for Grp Key xmit.*/
+ union pn48 dot11Grprxpn; /* PN48 used for Grp Key recv.*/
+#ifdef CONFIG_88EU_AP_MODE
+ /* extend security capabilities for AP_MODE */
+ unsigned int dot8021xalg;/* 0:disable, 1:psk, 2:802.1x */
+ unsigned int wpa_psk;/* 0:disable, bit(0): WPA, bit(1):WPA2 */
+ unsigned int wpa_group_cipher;
+ unsigned int wpa2_group_cipher;
+ unsigned int wpa_pairwise_cipher;
+ unsigned int wpa2_pairwise_cipher;
+#endif
+ u8 wps_ie[MAX_WPS_IE_LEN];/* added in assoc req */
+ int wps_ie_len;
+ u8 binstallGrpkey;
+ u8 busetkipkey;
+ u8 bcheck_grpkey;
+ u8 bgrpkey_handshake;
+ s32 sw_encrypt;/* from registry_priv */
+ s32 sw_decrypt;/* from registry_priv */
+ s32 hw_decrypted;/* if the rx packets is hw_decrypted==false,i
+ * it means the hw has not been ready. */
+
+ /* keeps the auth_type & enc_status from upper layer
+ * ioctl(wpa_supplicant or wzc) */
+ u32 ndisauthtype; /* NDIS_802_11_AUTHENTICATION_MODE */
+ u32 ndisencryptstatus; /* NDIS_802_11_ENCRYPTION_STATUS */
+ struct wlan_bssid_ex sec_bss; /* for joinbss (h2c buffer) usage */
+ struct ndis_802_11_wep ndiswep;
+ u8 assoc_info[600];
+ u8 szofcapability[256]; /* for wpa2 usage */
+ u8 oidassociation[512]; /* for wpa/wpa2 usage */
+ u8 authenticator_ie[256]; /* store ap security information element */
+ u8 supplicant_ie[256]; /* store sta security information element */
+
+ /* for tkip countermeasure */
+ u32 last_mic_err_time;
+ u8 btkip_countermeasure;
+ u8 btkip_wait_report;
+ u32 btkip_countermeasure_time;
+
+ /* */
+ /* For WPA2 Pre-Authentication. */
+ /* */
+ struct rt_pmkid_list PMKIDList[NUM_PMKID_CACHE];
+ u8 PMKIDIndex;
+ u8 bWepDefaultKeyIdxSet;
+};
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(5, 8, 0)
+struct sha256_state {
+ u64 length;
+ u32 state[8], curlen;
+ u8 buf[64];
+};
+#endif
+
+#define GET_ENCRY_ALGO(psecuritypriv, psta, encry_algo, bmcst) \
+do { \
+ switch (psecuritypriv->dot11AuthAlgrthm) { \
+ case dot11AuthAlgrthm_Open: \
+ case dot11AuthAlgrthm_Shared: \
+ case dot11AuthAlgrthm_Auto: \
+ encry_algo = (u8)psecuritypriv->dot11PrivacyAlgrthm; \
+ break; \
+ case dot11AuthAlgrthm_8021X: \
+ if (bmcst) \
+ encry_algo = (u8)psecuritypriv->dot118021XGrpPrivacy;\
+ else \
+ encry_algo = (u8)psta->dot118021XPrivacy; \
+ break; \
+ case dot11AuthAlgrthm_WAPI: \
+ encry_algo = (u8)psecuritypriv->dot11PrivacyAlgrthm; \
+ break; \
+ } \
+} while (0)
+
+#define SET_ICE_IV_LEN(iv_len, icv_len, encrypt) \
+do { \
+ switch (encrypt) { \
+ case _WEP40_: \
+ case _WEP104_: \
+ iv_len = 4; \
+ icv_len = 4; \
+ break; \
+ case _TKIP_: \
+ iv_len = 8; \
+ icv_len = 4; \
+ break; \
+ case _AES_: \
+ iv_len = 8; \
+ icv_len = 8; \
+ break; \
+ case _SMS4_: \
+ iv_len = 18; \
+ icv_len = 16; \
+ break; \
+ default: \
+ iv_len = 0; \
+ icv_len = 0; \
+ break; \
+ } \
+} while (0)
+
+#define GET_TKIP_PN(iv, dot11txpn) \
+do { \
+ dot11txpn._byte_.TSC0 = iv[2]; \
+ dot11txpn._byte_.TSC1 = iv[0]; \
+ dot11txpn._byte_.TSC2 = iv[4]; \
+ dot11txpn._byte_.TSC3 = iv[5]; \
+ dot11txpn._byte_.TSC4 = iv[6]; \
+ dot11txpn._byte_.TSC5 = iv[7]; \
+} while (0)
+
+#define ROL32(A, n) (((A) << (n)) | (((A)>>(32-(n))) & ((1UL << (n)) - 1)))
+#define ROR32(A, n) ROL32((A), 32-(n))
+
+struct mic_data {
+ u32 K0, K1; /* Key */
+ u32 L, R; /* Current state */
+ u32 M; /* Message accumulator (single word) */
+ u32 nBytesInM; /* # bytes in M */
+};
+
+extern const u32 Te0[256];
+extern const u32 Te1[256];
+extern const u32 Te2[256];
+extern const u32 Te3[256];
+extern const u32 Te4[256];
+extern const u32 Td0[256];
+extern const u32 Td1[256];
+extern const u32 Td2[256];
+extern const u32 Td3[256];
+extern const u32 Td4[256];
+extern const u32 rcon[10];
+extern const u8 Td4s[256];
+extern const u8 rcons[10];
+
+#define RCON(i) (rcons[(i)] << 24)
+
+static inline u32 rotr(u32 val, int bits)
+{
+ return (val >> bits) | (val << (32 - bits));
+}
+
+#define TE0(i) Te0[((i) >> 24) & 0xff]
+#define TE1(i) rotr(Te0[((i) >> 16) & 0xff], 8)
+#define TE2(i) rotr(Te0[((i) >> 8) & 0xff], 16)
+#define TE3(i) rotr(Te0[(i) & 0xff], 24)
+#define TE41(i) ((Te0[((i) >> 24) & 0xff] << 8) & 0xff000000)
+#define TE42(i) (Te0[((i) >> 16) & 0xff] & 0x00ff0000)
+#define TE43(i) (Te0[((i) >> 8) & 0xff] & 0x0000ff00)
+#define TE44(i) ((Te0[(i) & 0xff] >> 8) & 0x000000ff)
+#define TE421(i) ((Te0[((i) >> 16) & 0xff] << 8) & 0xff000000)
+#define TE432(i) (Te0[((i) >> 8) & 0xff] & 0x00ff0000)
+#define TE443(i) (Te0[(i) & 0xff] & 0x0000ff00)
+#define TE414(i) ((Te0[((i) >> 24) & 0xff] >> 8) & 0x000000ff)
+#define TE4(i) ((Te0[(i)] >> 8) & 0x000000ff)
+
+#define TD0(i) Td0[((i) >> 24) & 0xff]
+#define TD1(i) rotr(Td0[((i) >> 16) & 0xff], 8)
+#define TD2(i) rotr(Td0[((i) >> 8) & 0xff], 16)
+#define TD3(i) rotr(Td0[(i) & 0xff], 24)
+#define TD41(i) (Td4s[((i) >> 24) & 0xff] << 24)
+#define TD42(i) (Td4s[((i) >> 16) & 0xff] << 16)
+#define TD43(i) (Td4s[((i) >> 8) & 0xff] << 8)
+#define TD44(i) (Td4s[(i) & 0xff])
+#define TD0_(i) Td0[(i) & 0xff]
+#define TD1_(i) rotr(Td0[(i) & 0xff], 8)
+#define TD2_(i) rotr(Td0[(i) & 0xff], 16)
+#define TD3_(i) rotr(Td0[(i) & 0xff], 24)
+
+#define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ \
+ ((u32)(pt)[2] << 8) ^ ((u32)(pt)[3]))
+
+#define PUTU32(ct, st) { \
+(ct)[0] = (u8)((st) >> 24); (ct)[1] = (u8)((st) >> 16); \
+(ct)[2] = (u8)((st) >> 8); (ct)[3] = (u8)(st); }
+
+#define WPA_GET_BE32(a) ((((u32)(a)[0]) << 24) | (((u32)(a)[1]) << 16) | \
+ (((u32)(a)[2]) << 8) | ((u32)(a)[3]))
+
+#define WPA_PUT_LE16(a, val) \
+ do { \
+ (a)[1] = ((u16)(val)) >> 8; \
+ (a)[0] = ((u16)(val)) & 0xff; \
+ } while (0)
+
+#define WPA_PUT_BE32(a, val) \
+ do { \
+ (a)[0] = (u8)((((u32)(val)) >> 24) & 0xff); \
+ (a)[1] = (u8)((((u32)(val)) >> 16) & 0xff); \
+ (a)[2] = (u8)((((u32)(val)) >> 8) & 0xff); \
+ (a)[3] = (u8)(((u32)(val)) & 0xff); \
+ } while (0)
+
+#define WPA_PUT_BE64(a, val) \
+ do { \
+ (a)[0] = (u8)(((u64)(val)) >> 56); \
+ (a)[1] = (u8)(((u64)(val)) >> 48); \
+ (a)[2] = (u8)(((u64)(val)) >> 40); \
+ (a)[3] = (u8)(((u64)(val)) >> 32); \
+ (a)[4] = (u8)(((u64)(val)) >> 24); \
+ (a)[5] = (u8)(((u64)(val)) >> 16); \
+ (a)[6] = (u8)(((u64)(val)) >> 8); \
+ (a)[7] = (u8)(((u64)(val)) & 0xff); \
+ } while (0)
+
+/* ===== start - public domain SHA256 implementation ===== */
+
+/* This is based on SHA256 implementation in LibTomCrypt that was released into
+ * public domain by Tom St Denis. */
+
+/* the K array */
+static const unsigned long K[64] = {
+ 0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL, 0x3956c25bUL,
+ 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL, 0xd807aa98UL, 0x12835b01UL,
+ 0x243185beUL, 0x550c7dc3UL, 0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL,
+ 0xc19bf174UL, 0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL,
+ 0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL, 0x983e5152UL,
+ 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL, 0xc6e00bf3UL, 0xd5a79147UL,
+ 0x06ca6351UL, 0x14292967UL, 0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL,
+ 0x53380d13UL, 0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL,
+ 0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL, 0xd192e819UL,
+ 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL, 0x19a4c116UL, 0x1e376c08UL,
+ 0x2748774cUL, 0x34b0bcb5UL, 0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL,
+ 0x682e6ff3UL, 0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL,
+ 0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL
+};
+
+/* Various logical functions */
+#define RORc(x, y) \
+ (((((unsigned long)(x) & 0xFFFFFFFFUL) >> (unsigned long)((y)&31)) | \
+ ((unsigned long)(x) << (unsigned long)(32-((y)&31)))) & 0xFFFFFFFFUL)
+#define Ch(x, y ,z) (z ^ (x & (y ^ z)))
+#define Maj(x, y, z) (((x | y) & z) | (x & y))
+#define S(x, n) RORc((x), (n))
+#define R(x, n) (((x)&0xFFFFFFFFUL)>>(n))
+#define Sigma0(x) (S(x, 2) ^ S(x, 13) ^ S(x, 22))
+#define Sigma1(x) (S(x, 6) ^ S(x, 11) ^ S(x, 25))
+#define Gamma0(x) (S(x, 7) ^ S(x, 18) ^ R(x, 3))
+#define Gamma1(x) (S(x, 17) ^ S(x, 19) ^ R(x, 10))
+#ifndef MIN
+#define MIN(x, y) (((x) < (y)) ? (x) : (y))
+#endif
+
+void rtw_secmicsetkey(struct mic_data *pmicdata, u8 *key);
+void rtw_secmicappendbyte(struct mic_data *pmicdata, u8 b);
+void rtw_secmicappend(struct mic_data *pmicdata, u8 *src, u32 nBytes);
+void rtw_secgetmic(struct mic_data *pmicdata, u8 *dst);
+void rtw_seccalctkipmic(u8 *key, u8 *header, u8 *data, u32 data_len,
+ u8 *Miccode, u8 priority);
+u32 rtw_aes_encrypt(struct adapter *padapter, u8 *pxmitframe);
+u32 rtw_tkip_encrypt(struct adapter *padapter, u8 *pxmitframe);
+void rtw_wep_encrypt(struct adapter *padapter, u8 *pxmitframe);
+u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe);
+u32 rtw_tkip_decrypt(struct adapter *padapter, u8 *precvframe);
+void rtw_wep_decrypt(struct adapter *padapter, u8 *precvframe);
+void rtw_use_tkipkey_handler(void *FunctionContext);
+
+#endif /* __RTL871X_SECURITY_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_sreset.h b/drivers/staging/r8188eu/include/rtw_sreset.h
new file mode 100644
index 000000000000..2a1244f75790
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_sreset.h
@@ -0,0 +1,50 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_SRESET_C_
+#define _RTW_SRESET_C_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+struct sreset_priv {
+ struct mutex silentreset_mutex;
+ u8 silent_reset_inprogress;
+ u8 Wifi_Error_Status;
+ unsigned long last_tx_time;
+ unsigned long last_tx_complete_time;
+};
+
+#include <rtl8188e_hal.h>
+
+#define WIFI_STATUS_SUCCESS 0
+#define USB_VEN_REQ_CMD_FAIL BIT0
+#define USB_READ_PORT_FAIL BIT1
+#define USB_WRITE_PORT_FAIL BIT2
+#define WIFI_MAC_TXDMA_ERROR BIT3
+#define WIFI_TX_HANG BIT4
+#define WIFI_RX_HANG BIT5
+#define WIFI_IF_NOT_EXIST BIT6
+
+void sreset_init_value(struct adapter *padapter);
+void sreset_reset_value(struct adapter *padapter);
+u8 sreset_get_wifi_status(struct adapter *padapter);
+void sreset_set_wifi_error_status(struct adapter *padapter, u32 status);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_version.h b/drivers/staging/r8188eu/include/rtw_version.h
new file mode 100644
index 000000000000..6d2d52cbb3d3
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_version.h
@@ -0,0 +1 @@
+#define DRIVERVERSION "v4.1.4_6773.20130222"
diff --git a/drivers/staging/r8188eu/include/rtw_xmit.h b/drivers/staging/r8188eu/include/rtw_xmit.h
new file mode 100644
index 000000000000..5253dd0affd7
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_xmit.h
@@ -0,0 +1,383 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_XMIT_H_
+#define _RTW_XMIT_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define MAX_XMITBUF_SZ (20480) /* 20k */
+#define NR_XMITBUFF (4)
+
+#define XMITBUF_ALIGN_SZ 4
+
+/* xmit extension buff defination */
+#define MAX_XMIT_EXTBUF_SZ (1536)
+#define NR_XMIT_EXTBUFF (32)
+
+#define MAX_NUMBLKS (1)
+
+#define XMIT_VO_QUEUE (0)
+#define XMIT_VI_QUEUE (1)
+#define XMIT_BE_QUEUE (2)
+#define XMIT_BK_QUEUE (3)
+
+#define VO_QUEUE_INX 0
+#define VI_QUEUE_INX 1
+#define BE_QUEUE_INX 2
+#define BK_QUEUE_INX 3
+#define BCN_QUEUE_INX 4
+#define MGT_QUEUE_INX 5
+#define HIGH_QUEUE_INX 6
+#define TXCMD_QUEUE_INX 7
+
+#define HW_QUEUE_ENTRY 8
+
+#define WEP_IV(pattrib_iv, dot11txpn, keyidx)\
+do {\
+ pattrib_iv[0] = dot11txpn._byte_.TSC0;\
+ pattrib_iv[1] = dot11txpn._byte_.TSC1;\
+ pattrib_iv[2] = dot11txpn._byte_.TSC2;\
+ pattrib_iv[3] = ((keyidx & 0x3)<<6);\
+ dot11txpn.val = (dot11txpn.val == 0xffffff) ? 0 : (dot11txpn.val+1);\
+} while (0)
+
+#define TKIP_IV(pattrib_iv, dot11txpn, keyidx)\
+do {\
+ pattrib_iv[0] = dot11txpn._byte_.TSC1;\
+ pattrib_iv[1] = (dot11txpn._byte_.TSC1 | 0x20) & 0x7f;\
+ pattrib_iv[2] = dot11txpn._byte_.TSC0;\
+ pattrib_iv[3] = BIT(5) | ((keyidx & 0x3)<<6);\
+ pattrib_iv[4] = dot11txpn._byte_.TSC2;\
+ pattrib_iv[5] = dot11txpn._byte_.TSC3;\
+ pattrib_iv[6] = dot11txpn._byte_.TSC4;\
+ pattrib_iv[7] = dot11txpn._byte_.TSC5;\
+ dot11txpn.val = dot11txpn.val == 0xffffffffffffULL ? 0 : (dot11txpn.val+1);\
+} while (0)
+
+#define AES_IV(pattrib_iv, dot11txpn, keyidx)\
+do { \
+ pattrib_iv[0] = dot11txpn._byte_.TSC0; \
+ pattrib_iv[1] = dot11txpn._byte_.TSC1; \
+ pattrib_iv[2] = 0; \
+ pattrib_iv[3] = BIT(5) | ((keyidx & 0x3)<<6); \
+ pattrib_iv[4] = dot11txpn._byte_.TSC2; \
+ pattrib_iv[5] = dot11txpn._byte_.TSC3; \
+ pattrib_iv[6] = dot11txpn._byte_.TSC4; \
+ pattrib_iv[7] = dot11txpn._byte_.TSC5; \
+ dot11txpn.val = dot11txpn.val == 0xffffffffffffULL ? 0 : (dot11txpn.val+1);\
+} while (0)
+
+#define HWXMIT_ENTRY 4
+
+#define TXDESC_SIZE 32
+
+#define PACKET_OFFSET_SZ (8)
+#define TXDESC_OFFSET (TXDESC_SIZE + PACKET_OFFSET_SZ)
+
+struct tx_desc {
+ /* DWORD 0 */
+ __le32 txdw0;
+ __le32 txdw1;
+ __le32 txdw2;
+ __le32 txdw3;
+ __le32 txdw4;
+ __le32 txdw5;
+ __le32 txdw6;
+ __le32 txdw7;
+};
+
+union txdesc {
+ struct tx_desc txdesc;
+ unsigned int value[TXDESC_SIZE>>2];
+};
+
+struct hw_xmit {
+ struct __queue *sta_queue;
+ int accnt;
+};
+
+/* reduce size */
+struct pkt_attrib {
+ u8 type;
+ u8 subtype;
+ u8 bswenc;
+ u8 dhcp_pkt;
+ u16 ether_type;
+ u16 seqnum;
+ u16 pkt_hdrlen; /* the original 802.3 pkt header len */
+ u16 hdrlen; /* the WLAN Header Len */
+ u32 pktlen; /* the original 802.3 pkt raw_data len (not include
+ * ether_hdr data) */
+ u32 last_txcmdsz;
+ u8 nr_frags;
+ u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
+ * indicate the encrypt algorith */
+ u8 iv_len;
+ u8 icv_len;
+ u8 iv[18];
+ u8 icv[16];
+ u8 priority;
+ u8 ack_policy;
+ u8 mac_id;
+ u8 vcs_mode; /* virtual carrier sense method */
+ u8 dst[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ u8 ta[ETH_ALEN];
+ u8 ra[ETH_ALEN];
+ u8 key_idx;
+ u8 qos_en;
+ u8 ht_en;
+ u8 raid;/* rate adpative id */
+ u8 bwmode;
+ u8 ch_offset;/* PRIME_CHNL_OFFSET */
+ u8 sgi;/* short GI */
+ u8 ampdu_en;/* tx ampdu enable */
+ u8 mdata;/* more data bit */
+ u8 pctrl;/* per packet txdesc control enable */
+ u8 triggered;/* for ap mode handling Power Saving sta */
+ u8 qsel;
+ u8 eosp;
+ u8 rate;
+ u8 intel_proxim;
+ u8 retry_ctrl;
+ struct sta_info *psta;
+};
+
+#define WLANHDR_OFFSET 64
+
+#define NULL_FRAMETAG (0x0)
+#define DATA_FRAMETAG 0x01
+#define L2_FRAMETAG 0x02
+#define MGNT_FRAMETAG 0x03
+#define AMSDU_FRAMETAG 0x04
+
+#define EII_FRAMETAG 0x05
+#define IEEE8023_FRAMETAG 0x06
+
+#define MP_FRAMETAG 0x07
+
+#define TXAGG_FRAMETAG 0x08
+
+struct submit_ctx {
+ u32 submit_time; /* */
+ u32 timeout_ms; /* <0: not synchronous, 0: wait forever, >0: up to ms waiting */
+ int status; /* status for operation */
+ struct completion done;
+};
+
+enum {
+ RTW_SCTX_SUBMITTED = -1,
+ RTW_SCTX_DONE_SUCCESS = 0,
+ RTW_SCTX_DONE_UNKNOWN,
+ RTW_SCTX_DONE_TIMEOUT,
+ RTW_SCTX_DONE_BUF_ALLOC,
+ RTW_SCTX_DONE_BUF_FREE,
+ RTW_SCTX_DONE_WRITE_PORT_ERR,
+ RTW_SCTX_DONE_TX_DESC_NA,
+ RTW_SCTX_DONE_TX_DENY,
+ RTW_SCTX_DONE_CCX_PKT_FAIL,
+ RTW_SCTX_DONE_DRV_STOP,
+ RTW_SCTX_DONE_DEV_REMOVE,
+};
+
+void rtw_sctx_init(struct submit_ctx *sctx, int timeout_ms);
+int rtw_sctx_wait(struct submit_ctx *sctx);
+void rtw_sctx_done_err(struct submit_ctx **sctx, int status);
+void rtw_sctx_done(struct submit_ctx **sctx);
+
+struct xmit_buf {
+ struct list_head list;
+ struct adapter *padapter;
+ u8 *pallocated_buf;
+ u8 *pbuf;
+ void *priv_data;
+ u16 ext_tag; /* 0: Normal xmitbuf, 1: extension xmitbuf. */
+ u16 flags;
+ u32 alloc_sz;
+ u32 len;
+ struct submit_ctx *sctx;
+ u32 ff_hwaddr;
+ struct urb *pxmit_urb[8];
+ dma_addr_t dma_transfer_addr; /* (in) dma addr for transfer_buffer */
+ u8 bpending[8];
+ int last[8];
+};
+
+struct xmit_frame {
+ struct list_head list;
+ struct pkt_attrib attrib;
+ struct sk_buff *pkt;
+ int frame_tag;
+ struct adapter *padapter;
+ u8 *buf_addr;
+ struct xmit_buf *pxmitbuf;
+
+ u8 agg_num;
+ s8 pkt_offset;
+ u8 ack_report;
+};
+
+struct tx_servq {
+ struct list_head tx_pending;
+ struct __queue sta_pending;
+ int qcnt;
+};
+
+struct sta_xmit_priv {
+ spinlock_t lock;
+ int option;
+ int apsd_setting; /* When bit mask is on, the associated edca
+ * queue supports APSD. */
+ struct tx_servq be_q; /* priority == 0,3 */
+ struct tx_servq bk_q; /* priority == 1,2 */
+ struct tx_servq vi_q; /* priority == 4,5 */
+ struct tx_servq vo_q; /* priority == 6,7 */
+ struct list_head legacy_dz;
+ struct list_head apsd;
+ u16 txseq_tid[16];
+};
+
+struct hw_txqueue {
+ volatile int head;
+ volatile int tail;
+ volatile int free_sz; /* in units of 64 bytes */
+ volatile int free_cmdsz;
+ volatile int txsz[8];
+ uint ff_hwaddr;
+ uint cmd_hwaddr;
+ int ac_tag;
+};
+
+struct agg_pkt_info {
+ u16 offset;
+ u16 pkt_len;
+};
+
+struct xmit_priv {
+ spinlock_t lock;
+ struct semaphore xmit_sema;
+ struct semaphore terminate_xmitthread_sema;
+ struct __queue be_pending;
+ struct __queue bk_pending;
+ struct __queue vi_pending;
+ struct __queue vo_pending;
+ struct __queue bm_pending;
+ u8 *pallocated_frame_buf;
+ u8 *pxmit_frame_buf;
+ uint free_xmitframe_cnt;
+ struct __queue free_xmit_queue;
+ uint frag_len;
+ struct adapter *adapter;
+ u8 vcs_setting;
+ u8 vcs;
+ u8 vcs_type;
+ u64 tx_bytes;
+ u64 tx_pkts;
+ u64 tx_drop;
+ u64 last_tx_bytes;
+ u64 last_tx_pkts;
+ struct hw_xmit *hwxmits;
+ u8 hwxmit_entry;
+ u8 wmm_para_seq[4];/* sequence for wmm ac parameter strength
+ * from large to small. it's value is 0->vo,
+ * 1->vi, 2->be, 3->bk. */
+ struct semaphore tx_retevt;/* all tx return event; */
+ u8 txirp_cnt;/* */
+ struct tasklet_struct xmit_tasklet;
+ /* per AC pending irp */
+ int beq_cnt;
+ int bkq_cnt;
+ int viq_cnt;
+ int voq_cnt;
+ struct __queue free_xmitbuf_queue;
+ struct __queue pending_xmitbuf_queue;
+ u8 *pallocated_xmitbuf;
+ u8 *pxmitbuf;
+ uint free_xmitbuf_cnt;
+ struct __queue free_xmit_extbuf_queue;
+ u8 *pallocated_xmit_extbuf;
+ u8 *pxmit_extbuf;
+ uint free_xmit_extbuf_cnt;
+ u16 nqos_ssn;
+ int ack_tx;
+ struct mutex ack_tx_mutex;
+ struct submit_ctx ack_tx_ops;
+};
+
+struct xmit_buf *rtw_alloc_xmitbuf_ext(struct xmit_priv *pxmitpriv);
+s32 rtw_free_xmitbuf_ext(struct xmit_priv *pxmitpriv,
+ struct xmit_buf *pxmitbuf);
+struct xmit_buf *rtw_alloc_xmitbuf(struct xmit_priv *pxmitpriv);
+s32 rtw_free_xmitbuf(struct xmit_priv *pxmitpriv,
+ struct xmit_buf *pxmitbuf);
+void rtw_count_tx_stats(struct adapter *padapter,
+ struct xmit_frame *pxmitframe, int sz);
+void rtw_update_protection(struct adapter *padapter, u8 *ie, uint ie_len);
+s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr,
+ struct pkt_attrib *pattrib);
+s32 rtw_put_snap(u8 *data, u16 h_proto);
+
+struct xmit_frame *rtw_alloc_xmitframe(struct xmit_priv *pxmitpriv);
+s32 rtw_free_xmitframe(struct xmit_priv *pxmitpriv,
+ struct xmit_frame *pxmitframe);
+void rtw_free_xmitframe_queue(struct xmit_priv *pxmitpriv,
+ struct __queue *pframequeue);
+struct tx_servq *rtw_get_sta_pending(struct adapter *padapter,
+ struct sta_info *psta, int up, u8 *ac);
+s32 rtw_xmitframe_enqueue(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+struct xmit_frame *rtw_dequeue_xframe(struct xmit_priv *pxmitpriv,
+ struct hw_xmit *phwxmit_i, int entry);
+
+s32 rtw_xmit_classifier(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+u32 rtw_calculate_wlan_pkt_size_by_attribue(struct pkt_attrib *pattrib);
+#define rtw_wlan_pkt_size(f) rtw_calculate_wlan_pkt_size_by_attribue(&f->attrib)
+s32 rtw_xmitframe_coalesce(struct adapter *padapter, struct sk_buff *pkt,
+ struct xmit_frame *pxmitframe);
+s32 _rtw_init_hw_txqueue(struct hw_txqueue *phw_txqueue, u8 ac_tag);
+void _rtw_init_sta_xmit_priv(struct sta_xmit_priv *psta_xmitpriv);
+s32 rtw_txframes_pending(struct adapter *padapter);
+s32 rtw_txframes_sta_ac_pending(struct adapter *padapter,
+ struct pkt_attrib *pattrib);
+void rtw_init_hwxmits(struct hw_xmit *phwxmit, int entry);
+s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, struct adapter *padapter);
+void _rtw_free_xmit_priv(struct xmit_priv *pxmitpriv);
+void rtw_alloc_hwxmits(struct adapter *padapter);
+void rtw_free_hwxmits(struct adapter *padapter);
+s32 rtw_xmit(struct adapter *padapter, struct sk_buff **pkt);
+
+#if defined(CONFIG_88EU_AP_MODE)
+int xmitframe_enqueue_for_sleeping_sta(struct adapter *padapter, struct xmit_frame *pxmitframe);
+void stop_sta_xmit(struct adapter *padapter, struct sta_info *psta);
+void wakeup_sta_to_xmit(struct adapter *padapter, struct sta_info *psta);
+void xmit_delivery_enabled_frames(struct adapter *padapter, struct sta_info *psta);
+#endif
+
+u8 qos_acm(u8 acm_mask, u8 priority);
+u32 rtw_get_ff_hwaddr(struct xmit_frame *pxmitframe);
+int rtw_ack_tx_wait(struct xmit_priv *pxmitpriv, u32 timeout_ms);
+void rtw_ack_tx_done(struct xmit_priv *pxmitpriv, int status);
+
+/* include after declaring struct xmit_buf, in order to avoid warning */
+#include <xmit_osdep.h>
+
+#endif /* _RTL871X_XMIT_H_ */
diff --git a/drivers/staging/r8188eu/include/sta_info.h b/drivers/staging/r8188eu/include/sta_info.h
new file mode 100644
index 000000000000..3e909db1d41a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/sta_info.h
@@ -0,0 +1,384 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __STA_INFO_H_
+#define __STA_INFO_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <wifi.h>
+
+#define IBSS_START_MAC_ID 2
+#define NUM_STA 32
+#define NUM_ACL 16
+
+/* if mode ==0, then the sta is allowed once the addr is hit. */
+/* if mode ==1, then the sta is rejected once the addr is non-hit. */
+struct rtw_wlan_acl_node {
+ struct list_head list;
+ u8 addr[ETH_ALEN];
+ u8 valid;
+};
+
+/* mode=0, disable */
+/* mode=1, accept unless in deny list */
+/* mode=2, deny unless in accept list */
+struct wlan_acl_pool {
+ int mode;
+ int num;
+ struct rtw_wlan_acl_node aclnode[NUM_ACL];
+ struct __queue acl_node_q;
+};
+
+struct rssi_sta {
+ s32 UndecoratedSmoothedPWDB;
+ s32 UndecoratedSmoothedCCK;
+ s32 UndecoratedSmoothedOFDM;
+ u64 PacketMap;
+ u8 ValidBit;
+};
+
+struct stainfo_stats {
+ u64 rx_mgnt_pkts;
+ u64 rx_beacon_pkts;
+ u64 rx_probereq_pkts;
+ u64 rx_probersp_pkts;
+ u64 rx_probersp_bm_pkts;
+ u64 rx_probersp_uo_pkts;
+ u64 rx_ctrl_pkts;
+ u64 rx_data_pkts;
+
+ u64 last_rx_mgnt_pkts;
+ u64 last_rx_beacon_pkts;
+ u64 last_rx_probereq_pkts;
+ u64 last_rx_probersp_pkts;
+ u64 last_rx_probersp_bm_pkts;
+ u64 last_rx_probersp_uo_pkts;
+ u64 last_rx_ctrl_pkts;
+ u64 last_rx_data_pkts;
+ u64 rx_bytes;
+ u64 rx_drops;
+ u64 tx_pkts;
+ u64 tx_bytes;
+ u64 tx_drops;
+};
+
+struct sta_info {
+ spinlock_t lock;
+ struct list_head list; /* free_sta_queue */
+ struct list_head hash_list; /* sta_hash */
+
+ struct sta_xmit_priv sta_xmitpriv;
+ struct sta_recv_priv sta_recvpriv;
+
+ struct __queue sleep_q;
+ unsigned int sleepq_len;
+
+ uint state;
+ uint aid;
+ uint mac_id;
+ uint qos_option;
+ u8 hwaddr[ETH_ALEN];
+
+ uint ieee8021x_blocked; /* 0: allowed, 1:blocked */
+ uint dot118021XPrivacy; /* aes, tkip... */
+ union Keytype dot11tkiptxmickey;
+ union Keytype dot11tkiprxmickey;
+ union Keytype dot118021x_UncstKey;
+ union pn48 dot11txpn; /* PN48 used for Unicast xmit. */
+ union pn48 dot11rxpn; /* PN48 used for Unicast recv. */
+ u8 bssrateset[16];
+ u32 bssratelen;
+ s32 rssi;
+ s32 signal_quality;
+
+ u8 cts2self;
+ u8 rtsen;
+
+ u8 raid;
+ u8 init_rate;
+ u32 ra_mask;
+ u8 wireless_mode; /* NETWORK_TYPE */
+ struct stainfo_stats sta_stats;
+
+ /* for A-MPDU TX, ADDBA timeout check */
+ struct timer_list addba_retry_timer;
+
+ /* for A-MPDU Rx reordering buffer control */
+ struct recv_reorder_ctrl recvreorder_ctrl[16];
+
+ /* for A-MPDU Tx */
+ /* unsigned char ampdu_txen_bitmap; */
+ u16 BA_starting_seqctrl[16];
+
+ struct ht_priv htpriv;
+
+ /* Notes: */
+ /* STA_Mode: */
+ /* curr_network(mlme_priv/security_priv/qos/ht) +
+ * sta_info: (STA & AP) CAP/INFO */
+ /* scan_q: AP CAP/INFO */
+
+ /* AP_Mode: */
+ /* curr_network(mlme_priv/security_priv/qos/ht) : AP CAP/INFO */
+ /* sta_info: (AP & STA) CAP/INFO */
+
+ struct list_head asoc_list;
+#ifdef CONFIG_88EU_AP_MODE
+ struct list_head auth_list;
+
+ unsigned int expire_to;
+ unsigned int auth_seq;
+ unsigned int authalg;
+ unsigned char chg_txt[128];
+
+ u16 capability;
+ int flags;
+
+ int dot8021xalg;/* 0:disable, 1:psk, 2:802.1x */
+ int wpa_psk;/* 0:disable, bit(0): WPA, bit(1):WPA2 */
+ int wpa_group_cipher;
+ int wpa2_group_cipher;
+ int wpa_pairwise_cipher;
+ int wpa2_pairwise_cipher;
+
+ u8 bpairwise_key_installed;
+
+ u8 wpa_ie[32];
+
+ u8 nonerp_set;
+ u8 no_short_slot_time_set;
+ u8 no_short_preamble_set;
+ u8 no_ht_gf_set;
+ u8 no_ht_set;
+ u8 ht_20mhz_set;
+
+ unsigned int tx_ra_bitmap;
+ u8 qos_info;
+
+ u8 max_sp_len;
+ u8 uapsd_bk;/* BIT(0): Delivery enabled, BIT(1): Trigger enabled */
+ u8 uapsd_be;
+ u8 uapsd_vi;
+ u8 uapsd_vo;
+
+ u8 has_legacy_ac;
+ unsigned int sleepq_ac_len;
+#endif /* CONFIG_88EU_AP_MODE */
+
+#ifdef CONFIG_88EU_P2P
+ /* p2p priv data */
+ u8 is_p2p_device;
+ u8 p2p_status_code;
+
+ /* p2p client info */
+ u8 dev_addr[ETH_ALEN];
+ u8 dev_cap;
+ u16 config_methods;
+ u8 primary_dev_type[8];
+ u8 num_of_secdev_type;
+ u8 secdev_types_list[32];/* 32/8 == 4; */
+ u16 dev_name_len;
+ u8 dev_name[32];
+#endif /* CONFIG_88EU_P2P */
+ u8 under_exist_checking;
+ u8 keep_alive_trycnt;
+
+ /* for DM */
+ struct rssi_sta rssi_stat;
+
+ /* ================ODM Relative Info======================= */
+ /* Please be careful, don't declare too much structure here.
+ * It will cost memory * STA support num. */
+ /* 2011/10/20 MH Add for ODM STA info. */
+ /* Driver Write */
+ u8 bValid; /* record the sta status link or not? */
+ u8 IOTPeer; /* Enum value. HT_IOT_PEER_E */
+ u8 rssi_level; /* for Refresh RA mask */
+ /* ODM Write */
+ /* 1 PHY_STATUS_INFO */
+ u8 RSSI_Path[4]; /* */
+ u8 RSSI_Ave;
+ u8 RXEVM[4];
+ u8 RXSNR[4];
+
+ /* ================ODM Relative Info======================= */
+ /* */
+
+ /* To store the sequence number of received management frame */
+ u16 RxMgmtFrameSeqNum;
+};
+
+#define sta_rx_pkts(sta) \
+ (sta->sta_stats.rx_mgnt_pkts \
+ + sta->sta_stats.rx_ctrl_pkts \
+ + sta->sta_stats.rx_data_pkts)
+
+#define sta_last_rx_pkts(sta) \
+ (sta->sta_stats.last_rx_mgnt_pkts \
+ + sta->sta_stats.last_rx_ctrl_pkts \
+ + sta->sta_stats.last_rx_data_pkts)
+
+#define sta_rx_data_pkts(sta) \
+ (sta->sta_stats.rx_data_pkts)
+
+#define sta_last_rx_data_pkts(sta) \
+ (sta->sta_stats.last_rx_data_pkts)
+
+#define sta_rx_mgnt_pkts(sta) \
+ (sta->sta_stats.rx_mgnt_pkts)
+
+#define sta_last_rx_mgnt_pkts(sta) \
+ (sta->sta_stats.last_rx_mgnt_pkts)
+
+#define sta_rx_beacon_pkts(sta) \
+ (sta->sta_stats.rx_beacon_pkts)
+
+#define sta_last_rx_beacon_pkts(sta) \
+ (sta->sta_stats.last_rx_beacon_pkts)
+
+#define sta_rx_probereq_pkts(sta) \
+ (sta->sta_stats.rx_probereq_pkts)
+
+#define sta_last_rx_probereq_pkts(sta) \
+ (sta->sta_stats.last_rx_probereq_pkts)
+
+#define sta_rx_probersp_pkts(sta) \
+ (sta->sta_stats.rx_probersp_pkts)
+
+#define sta_last_rx_probersp_pkts(sta) \
+ (sta->sta_stats.last_rx_probersp_pkts)
+
+#define sta_rx_probersp_bm_pkts(sta) \
+ (sta->sta_stats.rx_probersp_bm_pkts)
+
+#define sta_last_rx_probersp_bm_pkts(sta) \
+ (sta->sta_stats.last_rx_probersp_bm_pkts)
+
+#define sta_rx_probersp_uo_pkts(sta) \
+ (sta->sta_stats.rx_probersp_uo_pkts)
+
+#define sta_last_rx_probersp_uo_pkts(sta) \
+ (sta->sta_stats.last_rx_probersp_uo_pkts)
+
+#define sta_update_last_rx_pkts(sta) \
+do { \
+ sta->sta_stats.last_rx_mgnt_pkts = sta->sta_stats.rx_mgnt_pkts; \
+ sta->sta_stats.last_rx_beacon_pkts = sta->sta_stats.rx_beacon_pkts; \
+ sta->sta_stats.last_rx_probereq_pkts = sta->sta_stats.rx_probereq_pkts; \
+ sta->sta_stats.last_rx_probersp_pkts = sta->sta_stats.rx_probersp_pkts; \
+ sta->sta_stats.last_rx_probersp_bm_pkts = sta->sta_stats.rx_probersp_bm_pkts; \
+ sta->sta_stats.last_rx_probersp_uo_pkts = sta->sta_stats.rx_probersp_uo_pkts; \
+ sta->sta_stats.last_rx_ctrl_pkts = sta->sta_stats.rx_ctrl_pkts; \
+ sta->sta_stats.last_rx_data_pkts = sta->sta_stats.rx_data_pkts; \
+} while (0)
+
+#define STA_RX_PKTS_ARG(sta) \
+ sta->sta_stats.rx_mgnt_pkts \
+ , sta->sta_stats.rx_ctrl_pkts \
+ , sta->sta_stats.rx_data_pkts
+
+#define STA_LAST_RX_PKTS_ARG(sta) \
+ sta->sta_stats.last_rx_mgnt_pkts \
+ , sta->sta_stats.last_rx_ctrl_pkts \
+ , sta->sta_stats.last_rx_data_pkts
+
+#define STA_RX_PKTS_DIFF_ARG(sta) \
+ sta->sta_stats.rx_mgnt_pkts - sta->sta_stats.last_rx_mgnt_pkts \
+ , sta->sta_stats.rx_ctrl_pkts - sta->sta_stats.last_rx_ctrl_pkts \
+ , sta->sta_stats.rx_data_pkts - sta->sta_stats.last_rx_data_pkts
+
+#define STA_PKTS_FMT "(m:%llu, c:%llu, d:%llu)"
+
+struct sta_priv {
+ u8 *pallocated_stainfo_buf;
+ u8 *pstainfo_buf;
+ struct __queue free_sta_queue;
+
+ spinlock_t sta_hash_lock;
+ struct list_head sta_hash[NUM_STA];
+ int asoc_sta_count;
+ struct __queue sleep_q;
+ struct __queue wakeup_q;
+
+ struct adapter *padapter;
+
+ spinlock_t asoc_list_lock;
+ struct list_head asoc_list;
+
+#ifdef CONFIG_88EU_AP_MODE
+ struct list_head auth_list;
+ spinlock_t auth_list_lock;
+ u8 asoc_list_cnt;
+ u8 auth_list_cnt;
+
+ unsigned int auth_to; /* sec, time to expire in authenticating. */
+ unsigned int assoc_to; /* sec, time to expire before associating. */
+ unsigned int expire_to; /* sec , time to expire after associated. */
+
+ /* pointers to STA info; based on allocated AID or NULL if AID free
+ * AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1
+ * and so on
+ */
+ struct sta_info *sta_aid[NUM_STA];
+
+ u16 sta_dz_bitmap;/* only support 15 stations, station aid bitmap
+ * for sleeping sta. */
+ u16 tim_bitmap; /* only support 15 stations, aid=0~15 mapping
+ * bit0~bit15 */
+
+ u16 max_num_sta;
+
+ struct wlan_acl_pool acl_list;
+#endif
+
+};
+
+static inline u32 wifi_mac_hash(u8 *mac)
+{
+ u32 x;
+
+ x = mac[0];
+ x = (x << 2) ^ mac[1];
+ x = (x << 2) ^ mac[2];
+ x = (x << 2) ^ mac[3];
+ x = (x << 2) ^ mac[4];
+ x = (x << 2) ^ mac[5];
+
+ x ^= x >> 8;
+ x = x & (NUM_STA - 1);
+ return x;
+}
+
+extern u32 _rtw_init_sta_priv(struct sta_priv *pstapriv);
+extern u32 _rtw_free_sta_priv(struct sta_priv *pstapriv);
+
+#define stainfo_offset_valid(offset) (offset < NUM_STA && offset >= 0)
+int rtw_stainfo_offset(struct sta_priv *stapriv, struct sta_info *sta);
+struct sta_info *rtw_get_stainfo_by_offset(struct sta_priv *stapriv, int off);
+
+extern struct sta_info *rtw_alloc_stainfo(struct sta_priv *stapriv, u8 *hwaddr);
+extern u32 rtw_free_stainfo(struct adapter *adapt, struct sta_info *psta);
+extern void rtw_free_all_stainfo(struct adapter *adapt);
+extern struct sta_info *rtw_get_stainfo(struct sta_priv *stapriv, u8 *hwaddr);
+extern u32 rtw_init_bcmc_stainfo(struct adapter *adapt);
+extern struct sta_info *rtw_get_bcmc_stainfo(struct adapter *padapter);
+extern u8 rtw_access_ctrl(struct adapter *padapter, u8 *mac_addr);
+
+#endif /* _STA_INFO_H_ */
diff --git a/drivers/staging/r8188eu/include/usb_hal.h b/drivers/staging/r8188eu/include/usb_hal.h
new file mode 100644
index 000000000000..8a65995d5e48
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_hal.h
@@ -0,0 +1,26 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __USB_HAL_H__
+#define __USB_HAL_H__
+
+void rtl8188eu_set_hal_ops(struct adapter *padapter);
+#define hal_set_hal_ops rtl8188eu_set_hal_ops
+
+#endif /* __USB_HAL_H__ */
diff --git a/drivers/staging/r8188eu/include/usb_ops.h b/drivers/staging/r8188eu/include/usb_ops.h
new file mode 100644
index 000000000000..6562082beb7a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_ops.h
@@ -0,0 +1,115 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __USB_OPS_H_
+#define __USB_OPS_H_
+
+#include <linux/version.h>
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <osdep_intf.h>
+
+#define REALTEK_USB_VENQT_READ 0xC0
+#define REALTEK_USB_VENQT_WRITE 0x40
+#define REALTEK_USB_VENQT_CMD_REQ 0x05
+#define REALTEK_USB_VENQT_CMD_IDX 0x00
+
+enum {
+ VENDOR_WRITE = 0x00,
+ VENDOR_READ = 0x01,
+};
+#define ALIGNMENT_UNIT 16
+#define MAX_VENDOR_REQ_CMD_SIZE 254 /* 8188cu SIE Support */
+#define MAX_USB_IO_CTL_SIZE (MAX_VENDOR_REQ_CMD_SIZE + ALIGNMENT_UNIT)
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 12))
+#define rtw_usb_control_msg(dev, pipe, request, requesttype, \
+ value, index, data, size, timeout_ms) \
+ usb_control_msg((dev), (pipe), (request), (requesttype), (value),\
+ (index), (data), (size), (timeout_ms))
+#define rtw_usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout_ms) \
+ usb_bulk_msg((usb_dev), (pipe), (data), (len), \
+ (actual_length), (timeout_ms))
+#else
+#define rtw_usb_control_msg(dev, pipe, request, requesttype, \
+ value, index, data, size, timeout_ms) \
+ usb_control_msg((dev), (pipe), (request), (requesttype), \
+ (value), (index), (data), (size), \
+ ((timeout_ms) == 0) || \
+ ((timeout_ms)*HZ/1000 > 0) ? \
+ ((timeout_ms)*HZ/1000) : 1)
+#define rtw_usb_bulk_msg(usb_dev, pipe, data, len, \
+ actual_length, timeout_ms) \
+ usb_bulk_msg((usb_dev), (pipe), (data), (len), (actual_length), \
+ ((timeout_ms) == 0) || ((timeout_ms)*HZ/1000 > 0) ?\
+ ((timeout_ms)*HZ/1000) : 1)
+#endif
+#include <usb_ops_linux.h>
+
+void rtl8188eu_set_hw_type(struct adapter *padapter);
+#define hal_set_hw_type rtl8188eu_set_hw_type
+void rtl8188eu_set_intf_ops(struct _io_ops *pops);
+#define usb_set_intf_ops rtl8188eu_set_intf_ops
+
+/*
+ * Increase and check if the continual_urb_error of this @param dvobjprivei
+ * is larger than MAX_CONTINUAL_URB_ERR
+ * @return true:
+ * @return false:
+ */
+static inline int rtw_inc_and_chk_continual_urb_error(struct dvobj_priv *dvobj)
+{
+ int ret = false;
+ int value;
+ value = ATOMIC_INC_RETURN(&dvobj->continual_urb_error);
+ if (value > MAX_CONTINUAL_URB_ERR) {
+ DBG_88E("[dvobj:%p][ERROR] continual_urb_error:%d > %d\n",
+ dvobj, value, MAX_CONTINUAL_URB_ERR);
+ ret = true;
+ }
+ return ret;
+}
+
+/*
+* Set the continual_urb_error of this @param dvobjprive to 0
+*/
+static inline void rtw_reset_continual_urb_error(struct dvobj_priv *dvobj)
+{
+ ATOMIC_SET(&dvobj->continual_urb_error, 0);
+}
+
+#define USB_HIGH_SPEED_BULK_SIZE 512
+#define USB_FULL_SPEED_BULK_SIZE 64
+
+static inline u8 rtw_usb_bulk_size_boundary(struct adapter *padapter,
+ int buf_len)
+{
+ u8 rst = true;
+ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
+
+ if (pdvobjpriv->ishighspeed)
+ rst = (0 == (buf_len) % USB_HIGH_SPEED_BULK_SIZE) ?
+ true : false;
+ else
+ rst = (0 == (buf_len) % USB_FULL_SPEED_BULK_SIZE) ?
+ true : false;
+ return rst;
+}
+
+#endif /* __USB_OPS_H_ */
diff --git a/drivers/staging/r8188eu/include/usb_ops_linux.h b/drivers/staging/r8188eu/include/usb_ops_linux.h
new file mode 100644
index 000000000000..e5b758a81a5c
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_ops_linux.h
@@ -0,0 +1,55 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __USB_OPS_LINUX_H__
+#define __USB_OPS_LINUX_H__
+
+#define VENDOR_CMD_MAX_DATA_LEN 254
+
+#define RTW_USB_CONTROL_MSG_TIMEOUT_TEST 10/* ms */
+#define RTW_USB_CONTROL_MSG_TIMEOUT 500/* ms */
+
+#define MAX_USBCTRL_VENDORREQ_TIMES 10
+
+#define RTW_USB_BULKOUT_TIME 5000/* ms */
+
+#define _usbctrl_vendorreq_async_callback(urb, regs) \
+ _usbctrl_vendorreq_async_callback(urb)
+#define usb_bulkout_zero_complete(purb, regs) \
+ usb_bulkout_zero_complete(purb)
+#define usb_write_mem_complete(purb, regs) \
+ usb_write_mem_complete(purb)
+#define usb_write_port_complete(purb, regs) \
+ usb_write_port_complete(purb)
+#define usb_read_port_complete(purb, regs) \
+ usb_read_port_complete(purb)
+#define usb_read_interrupt_complete(purb, regs) \
+ usb_read_interrupt_complete(purb)
+
+unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr);
+
+void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem);
+void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem);
+
+void usb_read_port_cancel(struct intf_hdl *pintfhdl);
+
+u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem);
+void usb_write_port_cancel(struct intf_hdl *pintfhdl);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/usb_osintf.h b/drivers/staging/r8188eu/include/usb_osintf.h
new file mode 100644
index 000000000000..9de99ca9799a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_osintf.h
@@ -0,0 +1,45 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __USB_OSINTF_H
+#define __USB_OSINTF_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <usb_vendor_req.h>
+
+extern char *rtw_initmac;
+extern int rtw_mc2u_disable;
+
+#define USBD_HALTED(Status) ((u32)(Status) >> 30 == 3)
+
+u8 usbvendorrequest(struct dvobj_priv *pdvobjpriv, enum bt_usb_request brequest,
+ enum rt_usb_wvalue wvalue, u8 windex, void *data,
+ u8 datalen, u8 isdirectionin);
+int pm_netdev_open(struct net_device *pnetdev, u8 bnormal);
+void netdev_br_init(struct net_device *netdev);
+void dhcp_flag_bcast(struct adapter *priv, struct sk_buff *skb);
+void *scdb_findEntry(struct adapter *priv, unsigned char *macAddr,
+ unsigned char *ipAddr);
+void nat25_db_expire(struct adapter *priv);
+int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method);
+
+int rtw_resume_process(struct adapter *padapter);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/usb_vendor_req.h b/drivers/staging/r8188eu/include/usb_vendor_req.h
new file mode 100644
index 000000000000..04f1b9e267e1
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_vendor_req.h
@@ -0,0 +1,51 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _USB_VENDOR_REQUEST_H_
+#define _USB_VENDOR_REQUEST_H_
+
+/* 4 Set/Get Register related wIndex/Data */
+#define RT_USB_RESET_MASK_OFF 0
+#define RT_USB_RESET_MASK_ON 1
+#define RT_USB_SLEEP_MASK_OFF 0
+#define RT_USB_SLEEP_MASK_ON 1
+#define RT_USB_LDO_ON 1
+#define RT_USB_LDO_OFF 0
+
+/* 4 Set/Get SYSCLK related wValue or Data */
+#define RT_USB_SYSCLK_32KHZ 0
+#define RT_USB_SYSCLK_40MHZ 1
+#define RT_USB_SYSCLK_60MHZ 2
+
+enum bt_usb_request {
+ RT_USB_SET_REGISTER = 1,
+ RT_USB_SET_SYSCLK = 2,
+ RT_USB_GET_SYSCLK = 3,
+ RT_USB_GET_REGISTER = 4
+};
+
+enum rt_usb_wvalue {
+ RT_USB_RESET_MASK = 1,
+ RT_USB_SLEEP_MASK = 2,
+ RT_USB_USB_HRCPWM = 3,
+ RT_USB_LDO = 4,
+ RT_USB_BOOT_TYPE = 5
+};
+
+#endif
diff --git a/drivers/staging/r8188eu/include/wifi.h b/drivers/staging/r8188eu/include/wifi.h
new file mode 100644
index 000000000000..33a7e6c19d04
--- /dev/null
+++ b/drivers/staging/r8188eu/include/wifi.h
@@ -0,0 +1,1105 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _WIFI_H_
+#define _WIFI_H_
+
+#include <linux/ieee80211.h>
+
+#ifdef BIT
+/* error "BIT define occurred earlier elsewhere!\n" */
+#undef BIT
+#endif
+#define BIT(x) (1 << (x))
+
+#define WLAN_ETHHDR_LEN 14
+#define WLAN_ETHADDR_LEN 6
+#define WLAN_IEEE_OUI_LEN 3
+#define WLAN_ADDR_LEN 6
+#define WLAN_CRC_LEN 4
+#define WLAN_BSSID_LEN 6
+#define WLAN_BSS_TS_LEN 8
+#define WLAN_HDR_A3_LEN 24
+#define WLAN_HDR_A4_LEN 30
+#define WLAN_HDR_A3_QOS_LEN 26
+#define WLAN_HDR_A4_QOS_LEN 32
+#define WLAN_SSID_MAXLEN 32
+#define WLAN_DATA_MAXLEN 2312
+
+#define WLAN_A3_PN_OFFSET 24
+#define WLAN_A4_PN_OFFSET 30
+
+#define WLAN_MIN_ETHFRM_LEN 60
+#define WLAN_MAX_ETHFRM_LEN 1514
+#define WLAN_ETHHDR_LEN 14
+
+#define P80211CAPTURE_VERSION 0x80211001
+
+/* This value is tested by WiFi 11n Test Plan 5.2.3. */
+/* This test verifies the WLAN NIC can update the NAV through sending
+ * the CTS with large duration. */
+#define WiFiNavUpperUs 30000 /* 30 ms */
+
+enum WIFI_FRAME_TYPE {
+ WIFI_MGT_TYPE = (0),
+ WIFI_CTRL_TYPE = (BIT(2)),
+ WIFI_DATA_TYPE = (BIT(3)),
+ WIFI_QOS_DATA_TYPE = (BIT(7)|BIT(3)), /* QoS Data */
+};
+
+enum WIFI_FRAME_SUBTYPE {
+ /* below is for mgt frame */
+ WIFI_ASSOCREQ = (0 | WIFI_MGT_TYPE),
+ WIFI_ASSOCRSP = (BIT(4) | WIFI_MGT_TYPE),
+ WIFI_REASSOCREQ = (BIT(5) | WIFI_MGT_TYPE),
+ WIFI_REASSOCRSP = (BIT(5) | BIT(4) | WIFI_MGT_TYPE),
+ WIFI_PROBEREQ = (BIT(6) | WIFI_MGT_TYPE),
+ WIFI_PROBERSP = (BIT(6) | BIT(4) | WIFI_MGT_TYPE),
+ WIFI_BEACON = (BIT(7) | WIFI_MGT_TYPE),
+ WIFI_ATIM = (BIT(7) | BIT(4) | WIFI_MGT_TYPE),
+ WIFI_DISASSOC = (BIT(7) | BIT(5) | WIFI_MGT_TYPE),
+ WIFI_AUTH = (BIT(7) | BIT(5) | BIT(4) | WIFI_MGT_TYPE),
+ WIFI_DEAUTH = (BIT(7) | BIT(6) | WIFI_MGT_TYPE),
+ WIFI_ACTION = (BIT(7) | BIT(6) | BIT(4) | WIFI_MGT_TYPE),
+
+ /* below is for control frame */
+ WIFI_PSPOLL = (BIT(7) | BIT(5) | WIFI_CTRL_TYPE),
+ WIFI_RTS = (BIT(7) | BIT(5) | BIT(4) | WIFI_CTRL_TYPE),
+ WIFI_CTS = (BIT(7) | BIT(6) | WIFI_CTRL_TYPE),
+ WIFI_ACK = (BIT(7) | BIT(6) | BIT(4) | WIFI_CTRL_TYPE),
+ WIFI_CFEND = (BIT(7) | BIT(6) | BIT(5) | WIFI_CTRL_TYPE),
+ WIFI_CFEND_CFACK = (BIT(7) | BIT(6) | BIT(5) | BIT(4) |
+ WIFI_CTRL_TYPE),
+
+ /* below is for data frame */
+ WIFI_DATA = (0 | WIFI_DATA_TYPE),
+ WIFI_DATA_CFACK = (BIT(4) | WIFI_DATA_TYPE),
+ WIFI_DATA_CFPOLL = (BIT(5) | WIFI_DATA_TYPE),
+ WIFI_DATA_CFACKPOLL = (BIT(5) | BIT(4) | WIFI_DATA_TYPE),
+ WIFI_DATA_NULL = (BIT(6) | WIFI_DATA_TYPE),
+ WIFI_CF_ACK = (BIT(6) | BIT(4) | WIFI_DATA_TYPE),
+ WIFI_CF_POLL = (BIT(6) | BIT(5) | WIFI_DATA_TYPE),
+ WIFI_CF_ACKPOLL = (BIT(6) | BIT(5) | BIT(4) | WIFI_DATA_TYPE),
+ WIFI_QOS_DATA_NULL = (BIT(6) | WIFI_QOS_DATA_TYPE),
+};
+
+enum WIFI_REASON_CODE {
+ _RSON_RESERVED_ = 0,
+ _RSON_UNSPECIFIED_ = 1,
+ _RSON_AUTH_NO_LONGER_VALID_ = 2,
+ _RSON_DEAUTH_STA_LEAVING_ = 3,
+ _RSON_INACTIVITY_ = 4,
+ _RSON_UNABLE_HANDLE_ = 5,
+ _RSON_CLS2_ = 6,
+ _RSON_CLS3_ = 7,
+ _RSON_DISAOC_STA_LEAVING_ = 8,
+ _RSON_ASOC_NOT_AUTH_ = 9,
+
+ /* WPA reason */
+ _RSON_INVALID_IE_ = 13,
+ _RSON_MIC_FAILURE_ = 14,
+ _RSON_4WAY_HNDSHK_TIMEOUT_ = 15,
+ _RSON_GROUP_KEY_UPDATE_TIMEOUT_ = 16,
+ _RSON_DIFF_IE_ = 17,
+ _RSON_MLTCST_CIPHER_NOT_VALID_ = 18,
+ _RSON_UNICST_CIPHER_NOT_VALID_ = 19,
+ _RSON_AKMP_NOT_VALID_ = 20,
+ _RSON_UNSUPPORT_RSNE_VER_ = 21,
+ _RSON_INVALID_RSNE_CAP_ = 22,
+ _RSON_IEEE_802DOT1X_AUTH_FAIL_ = 23,
+
+ /* belowing are Realtek definition */
+ _RSON_PMK_NOT_AVAILABLE_ = 24,
+ _RSON_TDLS_TEAR_TOOFAR_ = 25,
+ _RSON_TDLS_TEAR_UN_RSN_ = 26,
+};
+
+/* Reason codes (IEEE 802.11-2007, 7.3.1.7, Table 7-22)
+
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 */
+/* IEEE 802.11h */
+#define WLAN_REASON_PWR_CAPABILITY_NOT_VALID 10
+#define WLAN_REASON_SUPPORTED_CHANNEL_NOT_VALID 11
+
+/* IEEE 802.11i
+#define WLAN_REASON_INVALID_IE 13
+#define WLAN_REASON_MICHAEL_MIC_FAILURE 14
+#define WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT 15
+#define WLAN_REASON_GROUP_KEY_UPDATE_TIMEOUT 16
+#define WLAN_REASON_IE_IN_4WAY_DIFFERS 17
+#define WLAN_REASON_GROUP_CIPHER_NOT_VALID 18
+#define WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID 19
+#define WLAN_REASON_AKMP_NOT_VALID 20
+#define WLAN_REASON_UNSUPPORTED_RSN_IE_VERSION 21
+#define WLAN_REASON_INVALID_RSN_IE_CAPAB 22
+#define WLAN_REASON_IEEE_802_1X_AUTH_FAILED 23
+#define WLAN_REASON_CIPHER_SUITE_REJECTED 24 */
+
+enum WIFI_STATUS_CODE {
+ _STATS_SUCCESSFUL_ = 0,
+ _STATS_FAILURE_ = 1,
+ _STATS_CAP_FAIL_ = 10,
+ _STATS_NO_ASOC_ = 11,
+ _STATS_OTHER_ = 12,
+ _STATS_NO_SUPP_ALG_ = 13,
+ _STATS_OUT_OF_AUTH_SEQ_ = 14,
+ _STATS_CHALLENGE_FAIL_ = 15,
+ _STATS_AUTH_TIMEOUT_ = 16,
+ _STATS_UNABLE_HANDLE_STA_ = 17,
+ _STATS_RATE_FAIL_ = 18,
+};
+
+/* Status codes (IEEE 802.11-2007, 7.3.1.9, Table 7-23)
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18 */
+
+/* entended */
+/* IEEE 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+/* IEEE 802.11h */
+#define WLAN_STATUS_SPEC_MGMT_REQUIRED 22
+#define WLAN_STATUS_PWR_CAPABILITY_NOT_VALID 23
+#define WLAN_STATUS_SUPPORTED_CHANNEL_NOT_VALID 24
+/* IEEE 802.11g */
+#define WLAN_STATUS_ASSOC_DENIED_NO_SHORT_SLOT_TIME 25
+#define WLAN_STATUS_ASSOC_DENIED_NO_ER_PBCC 26
+#define WLAN_STATUS_ASSOC_DENIED_NO_DSSS_OFDM 27
+/* IEEE 802.11w */
+#define WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY 30
+#define WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION 31
+/* IEEE 802.11i */
+#define WLAN_STATUS_INVALID_IE 40
+#define WLAN_STATUS_GROUP_CIPHER_NOT_VALID 41
+#define WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID 42
+#define WLAN_STATUS_AKMP_NOT_VALID 43
+#define WLAN_STATUS_UNSUPPORTED_RSN_IE_VERSION 44
+#define WLAN_STATUS_INVALID_RSN_IE_CAPAB 45
+#define WLAN_STATUS_CIPHER_REJECTED_PER_POLICY 46
+#define WLAN_STATUS_TS_NOT_CREATED 47
+#define WLAN_STATUS_DIRECT_LINK_NOT_ALLOWED 48
+#define WLAN_STATUS_DEST_STA_NOT_PRESENT 49
+#define WLAN_STATUS_DEST_STA_NOT_QOS_STA 50
+#define WLAN_STATUS_ASSOC_DENIED_LISTEN_INT_TOO_LARGE 51
+/* IEEE 802.11r */
+#define WLAN_STATUS_INVALID_FT_ACTION_FRAME_COUNT 52
+#define WLAN_STATUS_INVALID_PMKID 53
+#define WLAN_STATUS_INVALID_MDIE 54
+#define WLAN_STATUS_INVALID_FTIE 55
+
+enum WIFI_REG_DOMAIN {
+ DOMAIN_FCC = 1,
+ DOMAIN_IC = 2,
+ DOMAIN_ETSI = 3,
+ DOMAIN_SPA = 4,
+ DOMAIN_FRANCE = 5,
+ DOMAIN_MKK = 6,
+ DOMAIN_ISRAEL = 7,
+ DOMAIN_MKK1 = 8,
+ DOMAIN_MKK2 = 9,
+ DOMAIN_MKK3 = 10,
+ DOMAIN_MAX
+};
+
+#define _TO_DS_ BIT(8)
+#define _FROM_DS_ BIT(9)
+#define _MORE_FRAG_ BIT(10)
+#define _RETRY_ BIT(11)
+#define _PWRMGT_ BIT(12)
+#define _MORE_DATA_ BIT(13)
+#define _PRIVACY_ BIT(14)
+#define _ORDER_ BIT(15)
+
+#define SetToDs(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_TO_DS_)
+
+#define GetToDs(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_TO_DS_)) != 0)
+
+#define ClearToDs(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_TO_DS_))
+
+#define SetFrDs(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_FROM_DS_)
+
+#define GetFrDs(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_FROM_DS_)) != 0)
+
+#define ClearFrDs(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_FROM_DS_))
+
+#define get_tofr_ds(pframe) ((GetToDs(pframe) << 1) | GetFrDs(pframe))
+
+#define SetMFrag(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_MORE_FRAG_)
+
+#define GetMFrag(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_MORE_FRAG_)) != 0)
+
+#define ClearMFrag(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_MORE_FRAG_))
+
+#define SetRetry(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_RETRY_)
+
+#define GetRetry(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_RETRY_)) != 0)
+
+#define ClearRetry(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_RETRY_))
+
+#define SetPwrMgt(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_PWRMGT_)
+
+#define GetPwrMgt(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_PWRMGT_)) != 0)
+
+#define ClearPwrMgt(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_PWRMGT_))
+
+#define SetMData(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_MORE_DATA_)
+
+#define GetMData(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_MORE_DATA_)) != 0)
+
+#define ClearMData(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_MORE_DATA_))
+
+#define SetPrivacy(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_PRIVACY_)
+
+#define GetPrivacy(pbuf) \
+ (((*(__le16 *)(pbuf)) & cpu_to_le16(_PRIVACY_)) != 0)
+
+#define ClearPrivacy(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_PRIVACY_))
+
+#define GetOrder(pbuf) \
+ (((*(__le16 *)(pbuf)) & cpu_to_le16(_ORDER_)) != 0)
+
+#define GetFrameType(pbuf) \
+ (le16_to_cpu(*(__le16 *)(pbuf)) & (BIT(3) | BIT(2)))
+
+#define SetFrameType(pbuf, type) \
+ do { \
+ *(unsigned short *)(pbuf) &= __constant_cpu_to_le16(~(BIT(3) | BIT(2))); \
+ *(unsigned short *)(pbuf) |= __constant_cpu_to_le16(type); \
+ } while (0)
+
+#define GetFrameSubType(pbuf) (le16_to_cpu(*(__le16 *)(pbuf)) & (BIT(7) |\
+ BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2)))
+
+#define SetFrameSubType(pbuf, type) \
+ do { \
+ *(__le16 *)(pbuf) &= cpu_to_le16(~(BIT(7) | BIT(6) | \
+ BIT(5) | BIT(4) | BIT(3) | BIT(2))); \
+ *(__le16 *)(pbuf) |= cpu_to_le16(type); \
+ } while (0)
+
+#define GetSequence(pbuf) \
+ (le16_to_cpu(*(__le16 *)((size_t)(pbuf) + 22)) >> 4)
+
+#define GetFragNum(pbuf) \
+ (le16_to_cpu(*(__le16 *)((size_t)(pbuf) + 22)) & 0x0f)
+
+#define GetTupleCache(pbuf) \
+ (cpu_to_le16(*(unsigned short *)((size_t)(pbuf) + 22)))
+
+#define SetFragNum(pbuf, num) \
+ do { \
+ *(unsigned short *)((size_t)(pbuf) + 22) = \
+ ((*(unsigned short *)((size_t)(pbuf) + 22)) & \
+ le16_to_cpu(~(0x000f))) | \
+ cpu_to_le16(0x0f & (num)); \
+ } while (0)
+
+#define SetSeqNum(pbuf, num) \
+ do { \
+ *(__le16 *)((size_t)(pbuf) + 22) = \
+ ((*(__le16 *)((size_t)(pbuf) + 22)) & cpu_to_le16((unsigned short)0x000f)) | \
+ cpu_to_le16((unsigned short)(0xfff0 & (num << 4))); \
+ } while (0)
+
+#define SetDuration(pbuf, dur) \
+ *(__le16 *)((size_t)(pbuf) + 2) = cpu_to_le16(0xffff & (dur))
+
+#define SetPriority(pbuf, tid) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(tid & 0xf)
+
+#define GetPriority(pbuf) ((le16_to_cpu(*(__le16 *)(pbuf))) & 0xf)
+
+#define SetEOSP(pbuf, eosp) \
+ *(__le16 *)(pbuf) |= cpu_to_le16((eosp & 1) << 4)
+
+#define SetAckpolicy(pbuf, ack) \
+ *(__le16 *)(pbuf) |= cpu_to_le16((ack & 3) << 5)
+
+#define GetAckpolicy(pbuf) (((le16_to_cpu(*(__le16 *)pbuf)) >> 5) & 0x3)
+
+#define GetAMsdu(pbuf) (((le16_to_cpu(*(__le16 *)pbuf)) >> 7) & 0x1)
+
+#define SetAMsdu(pbuf, amsdu) \
+ *(__le16 *)(pbuf) |= cpu_to_le16((amsdu & 1) << 7)
+
+#define GetAid(pbuf) (le16_to_cpu(*(__le16 *)((size_t)(pbuf) + 2)) & 0x3fff)
+
+#define GetTid(pbuf) (le16_to_cpu(*(__le16 *)((size_t)(pbuf) + \
+ (((GetToDs(pbuf)<<1) | GetFrDs(pbuf)) == 3 ? \
+ 30 : 24))) & 0x000f)
+
+#define GetAddr1Ptr(pbuf) ((unsigned char *)((size_t)(pbuf) + 4))
+
+#define GetAddr2Ptr(pbuf) ((unsigned char *)((size_t)(pbuf) + 10))
+
+#define GetAddr3Ptr(pbuf) ((unsigned char *)((size_t)(pbuf) + 16))
+
+#define GetAddr4Ptr(pbuf) ((unsigned char *)((size_t)(pbuf) + 24))
+
+#define MacAddr_isBcst(addr) \
+ ( \
+ ((addr[0] == 0xff) && (addr[1] == 0xff) && \
+ (addr[2] == 0xff) && (addr[3] == 0xff) && \
+ (addr[4] == 0xff) && (addr[5] == 0xff)) ? true : false \
+)
+
+static inline int IS_MCAST(unsigned char *da)
+{
+ if ((*da) & 0x01)
+ return true;
+ else
+ return false;
+}
+
+static inline unsigned char *get_da(unsigned char *pframe)
+{
+ unsigned char *da;
+ unsigned int to_fr_ds = (GetToDs(pframe) << 1) | GetFrDs(pframe);
+
+ switch (to_fr_ds) {
+ case 0x00: /* ToDs=0, FromDs=0 */
+ da = GetAddr1Ptr(pframe);
+ break;
+ case 0x01: /* ToDs=0, FromDs=1 */
+ da = GetAddr1Ptr(pframe);
+ break;
+ case 0x02: /* ToDs=1, FromDs=0 */
+ da = GetAddr3Ptr(pframe);
+ break;
+ default: /* ToDs=1, FromDs=1 */
+ da = GetAddr3Ptr(pframe);
+ break;
+ }
+ return da;
+}
+
+static inline unsigned char *get_sa(unsigned char *pframe)
+{
+ unsigned char *sa;
+ unsigned int to_fr_ds = (GetToDs(pframe) << 1) | GetFrDs(pframe);
+
+ switch (to_fr_ds) {
+ case 0x00: /* ToDs=0, FromDs=0 */
+ sa = GetAddr2Ptr(pframe);
+ break;
+ case 0x01: /* ToDs=0, FromDs=1 */
+ sa = GetAddr3Ptr(pframe);
+ break;
+ case 0x02: /* ToDs=1, FromDs=0 */
+ sa = GetAddr2Ptr(pframe);
+ break;
+ default: /* ToDs=1, FromDs=1 */
+ sa = GetAddr4Ptr(pframe);
+ break;
+ }
+ return sa;
+}
+
+static inline unsigned char *get_hdr_bssid(unsigned char *pframe)
+{
+ unsigned char *sa;
+ unsigned int to_fr_ds = (GetToDs(pframe) << 1) | GetFrDs(pframe);
+
+ switch (to_fr_ds) {
+ case 0x00: /* ToDs=0, FromDs=0 */
+ sa = GetAddr3Ptr(pframe);
+ break;
+ case 0x01: /* ToDs=0, FromDs=1 */
+ sa = GetAddr2Ptr(pframe);
+ break;
+ case 0x02: /* ToDs=1, FromDs=0 */
+ sa = GetAddr1Ptr(pframe);
+ break;
+ case 0x03: /* ToDs=1, FromDs=1 */
+ sa = GetAddr1Ptr(pframe);
+ break;
+ default:
+ sa = NULL; /* */
+ break;
+ }
+ return sa;
+}
+
+static inline int IsFrameTypeCtrl(unsigned char *pframe)
+{
+ if (WIFI_CTRL_TYPE == GetFrameType(pframe))
+ return true;
+ else
+ return false;
+}
+/*-----------------------------------------------------------------------------
+ Below is for the security related definition
+------------------------------------------------------------------------------*/
+#define _RESERVED_FRAME_TYPE_ 0
+#define _SKB_FRAME_TYPE_ 2
+#define _PRE_ALLOCMEM_ 1
+#define _PRE_ALLOCHDR_ 3
+#define _PRE_ALLOCLLCHDR_ 4
+#define _PRE_ALLOCICVHDR_ 5
+#define _PRE_ALLOCMICHDR_ 6
+
+#define _SIFSTIME_ \
+ ((priv->pmib->dot11BssType.net_work_type & WIRELESS_11A) ? 16 : 10)
+#define _ACKCTSLNG_ 14 /* 14 bytes long, including crclng */
+#define _CRCLNG_ 4
+
+#define _ASOCREQ_IE_OFFSET_ 4 /* excluding wlan_hdr */
+#define _ASOCRSP_IE_OFFSET_ 6
+#define _REASOCREQ_IE_OFFSET_ 10
+#define _REASOCRSP_IE_OFFSET_ 6
+#define _PROBEREQ_IE_OFFSET_ 0
+#define _PROBERSP_IE_OFFSET_ 12
+#define _AUTH_IE_OFFSET_ 6
+#define _DEAUTH_IE_OFFSET_ 0
+#define _BEACON_IE_OFFSET_ 12
+#define _PUBLIC_ACTION_IE_OFFSET_ 8
+
+#define _FIXED_IE_LENGTH_ _BEACON_IE_OFFSET_
+
+#define _SSID_IE_ 0
+#define _SUPPORTEDRATES_IE_ 1
+#define _DSSET_IE_ 3
+#define _TIM_IE_ 5
+#define _IBSS_PARA_IE_ 6
+#define _COUNTRY_IE_ 7
+#define _CHLGETXT_IE_ 16
+#define _SUPPORTED_CH_IE_ 36
+#define _CH_SWTICH_ANNOUNCE_ 37 /* Secondary Channel Offset */
+#define _RSN_IE_2_ 48
+#define _SSN_IE_1_ 221
+#define _ERPINFO_IE_ 42
+#define _EXT_SUPPORTEDRATES_IE_ 50
+
+#define _HT_CAPABILITY_IE_ 45
+#define _FTIE_ 55
+#define _TIMEOUT_ITVL_IE_ 56
+#define _SRC_IE_ 59
+#define _HT_EXTRA_INFO_IE_ 61
+#define _HT_ADD_INFO_IE_ 61 /* _HT_EXTRA_INFO_IE_ */
+#define _WAPI_IE_ 68
+
+#define EID_BSSCoexistence 72 /* 20/40 BSS Coexistence */
+#define EID_BSSIntolerantChlReport 73
+#define _RIC_Descriptor_IE_ 75
+
+#define _LINK_ID_IE_ 101
+#define _CH_SWITCH_TIMING_ 104
+#define _PTI_BUFFER_STATUS_ 106
+#define _EXT_CAP_IE_ 127
+#define _VENDOR_SPECIFIC_IE_ 221
+
+#define _RESERVED47_ 47
+
+/* ---------------------------------------------------------------------------
+ Below is the fixed elements...
+-----------------------------------------------------------------------------*/
+#define _AUTH_ALGM_NUM_ 2
+#define _AUTH_SEQ_NUM_ 2
+#define _BEACON_ITERVAL_ 2
+#define _CAPABILITY_ 2
+#define _CURRENT_APADDR_ 6
+#define _LISTEN_INTERVAL_ 2
+#define _RSON_CODE_ 2
+#define _ASOC_ID_ 2
+#define _STATUS_CODE_ 2
+#define _TIMESTAMP_ 8
+
+#define AUTH_ODD_TO 0
+#define AUTH_EVEN_TO 1
+
+#define WLAN_ETHCONV_ENCAP 1
+#define WLAN_ETHCONV_RFC1042 2
+#define WLAN_ETHCONV_8021h 3
+
+#define cap_ESS BIT(0)
+#define cap_IBSS BIT(1)
+#define cap_CFPollable BIT(2)
+#define cap_CFRequest BIT(3)
+#define cap_Privacy BIT(4)
+#define cap_ShortPremble BIT(5)
+#define cap_PBCC BIT(6)
+#define cap_ChAgility BIT(7)
+#define cap_SpecMgmt BIT(8)
+#define cap_QoSi BIT(9)
+#define cap_ShortSlot BIT(10)
+
+/*-----------------------------------------------------------------------------
+ Below is the definition for 802.11i / 802.1x
+------------------------------------------------------------------------------*/
+#define _IEEE8021X_MGT_ 1 /* WPA */
+#define _IEEE8021X_PSK_ 2 /* WPA with pre-shared key */
+
+/*
+#define _NO_PRIVACY_ 0
+#define _WEP_40_PRIVACY_ 1
+#define _TKIP_PRIVACY_ 2
+#define _WRAP_PRIVACY_ 3
+#define _CCMP_PRIVACY_ 4
+#define _WEP_104_PRIVACY_ 5
+#define _WEP_WPA_MIXED_PRIVACY_ 6 WEP + WPA
+*/
+
+/*-----------------------------------------------------------------------------
+ Below is the definition for WMM
+------------------------------------------------------------------------------*/
+#define _WMM_IE_Length_ 7 /* for WMM STA */
+#define _WMM_Para_Element_Length_ 24
+
+/*-----------------------------------------------------------------------------
+ Below is the definition for 802.11n
+------------------------------------------------------------------------------*/
+
+#define SetOrderBit(pbuf) \
+ do { \
+ *(unsigned short *)(pbuf) |= cpu_to_le16(_ORDER_); \
+ } while (0)
+
+#define GetOrderBit(pbuf) \
+ (((*(unsigned short *)(pbuf)) & le16_to_cpu(_ORDER_)) != 0)
+
+/**
+ * struct rtw_ieee80211_bar - HT Block Ack Request
+ *
+ * This structure refers to "HT BlockAckReq" as
+ * described in 802.11n draft section 7.2.1.7.1
+ */
+struct rtw_ieee80211_bar {
+ __le16 frame_control;
+ __le16 duration;
+ unsigned char ra[ETH_ALEN];
+ unsigned char ta[ETH_ALEN];
+ __le16 control;
+ __le16 start_seq_num;
+} __packed;
+
+/* 802.11 BAR control masks */
+#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
+#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004
+
+/**
+ * struct ieee80211_ht_cap - HT additional information
+ *
+ * This structure refers to "HT information element" as
+ * described in 802.11n draft section 7.3.2.53
+ */
+struct ieee80211_ht_addt_info {
+ unsigned char control_chan;
+ unsigned char ht_param;
+ __le16 operation_mode;
+ __le16 stbc_param;
+ unsigned char basic_set[16];
+} __packed;
+
+struct HT_caps_element {
+ union {
+ struct {
+ __le16 HT_caps_info;
+ unsigned char AMPDU_para;
+ unsigned char MCS_rate[16];
+ __le16 HT_ext_caps;
+ __le16 Beamforming_caps;
+ unsigned char ASEL_caps;
+ } HT_cap_element;
+ unsigned char HT_cap[26];
+ } u;
+} __packed;
+
+struct HT_info_element {
+ unsigned char primary_channel;
+ unsigned char infos[5];
+ unsigned char MCS_rate[16];
+} __packed;
+
+struct AC_param {
+ unsigned char ACI_AIFSN;
+ unsigned char CW;
+ __le16 TXOP_limit;
+} __packed;
+
+struct WMM_para_element {
+ unsigned char QoS_info;
+ unsigned char reserved;
+ struct AC_param ac_param[4];
+} __packed;
+
+struct ADDBA_request {
+ unsigned char action_code;
+ unsigned char dialog_token;
+ __le16 BA_para_set;
+ __le16 BA_timeout_value;
+ __le16 BA_starting_seqctrl;
+} __packed;
+
+enum ht_cap_ampdu_factor {
+ MAX_AMPDU_FACTOR_8K = 0,
+ MAX_AMPDU_FACTOR_16K = 1,
+ MAX_AMPDU_FACTOR_32K = 2,
+ MAX_AMPDU_FACTOR_64K = 3,
+};
+
+/* 802.11n HT capabilities masks */
+#define IEEE80211_HT_CAP_SUP_WIDTH 0x0002
+#define IEEE80211_HT_CAP_SM_PS 0x000C
+#define IEEE80211_HT_CAP_GRN_FLD 0x0010
+#define IEEE80211_HT_CAP_SGI_20 0x0020
+#define IEEE80211_HT_CAP_SGI_40 0x0040
+#define IEEE80211_HT_CAP_TX_STBC 0x0080
+#define IEEE80211_HT_CAP_RX_STBC 0x0300
+#define IEEE80211_HT_CAP_DELAY_BA 0x0400
+#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
+#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
+/* 802.11n HT capability AMPDU settings */
+#define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03
+#define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C
+/* 802.11n HT capability MSC set */
+#define IEEE80211_SUPP_MCS_SET_UEQM 4
+#define IEEE80211_HT_CAP_MAX_STREAMS 4
+#define IEEE80211_SUPP_MCS_SET_LEN 10
+/* maximum streams the spec allows */
+#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01
+#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02
+#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C
+#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10
+/* 802.11n HT IE masks */
+#define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03
+#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00
+#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01
+#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03
+#define IEEE80211_HT_IE_CHA_WIDTH 0x04
+#define IEEE80211_HT_IE_HT_PROTECTION 0x0003
+#define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004
+#define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010
+
+/* block-ack parameters */
+#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
+#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
+#define RTW_IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
+#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
+#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
+
+/*
+ * A-PMDU buffer sizes
+ * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
+ */
+#define IEEE80211_MIN_AMPDU_BUF 0x8
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(4,19,0))
+#define IEEE80211_MAX_AMPDU_BUF 0x40
+#endif
+
+/* Spatial Multiplexing Power Save Modes */
+#define WLAN_HT_CAP_SM_PS_STATIC 0
+#define WLAN_HT_CAP_SM_PS_DYNAMIC 1
+#define WLAN_HT_CAP_SM_PS_INVALID 2
+#define WLAN_HT_CAP_SM_PS_DISABLED 3
+
+#define OP_MODE_PURE 0
+#define OP_MODE_MAY_BE_LEGACY_STAS 1
+#define OP_MODE_20MHZ_HT_STA_ASSOCED 2
+#define OP_MODE_MIXED 3
+
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK ((u8) BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE ((u8) BIT(0))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW ((u8) BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH ((u8) BIT(2))
+#define HT_INFO_HT_PARAM_RIFS_MODE ((u8) BIT(3))
+#define HT_INFO_HT_PARAM_CTRL_ACCESS_ONLY ((u8) BIT(4))
+#define HT_INFO_HT_PARAM_SRV_INTERVAL_GRANULARITY ((u8) BIT(5))
+
+#define HT_INFO_OPERATION_MODE_OP_MODE_MASK \
+ ((u16) (0x0001 | 0x0002))
+#define HT_INFO_OPERATION_MODE_OP_MODE_OFFSET 0
+#define HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT ((u8) BIT(2))
+#define HT_INFO_OPERATION_MODE_TRANSMIT_BURST_LIMIT ((u8) BIT(3))
+#define HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT ((u8) BIT(4))
+
+#define HT_INFO_STBC_PARAM_DUAL_BEACON ((u16) BIT(6))
+#define HT_INFO_STBC_PARAM_DUAL_STBC_PROTECT ((u16) BIT(7))
+#define HT_INFO_STBC_PARAM_SECONDARY_BC ((u16) BIT(8))
+#define HT_INFO_STBC_PARAM_LSIG_TXOP_PROTECT_ALLOWED ((u16) BIT(9))
+#define HT_INFO_STBC_PARAM_PCO_ACTIVE ((u16) BIT(10))
+#define HT_INFO_STBC_PARAM_PCO_PHASE ((u16) BIT(11))
+
+/* ===============WPS Section=============== */
+/* For WPSv1.0 */
+#define WPSOUI 0x0050f204
+/* WPS attribute ID */
+#define WPS_ATTR_VER1 0x104A
+#define WPS_ATTR_SIMPLE_CONF_STATE 0x1044
+#define WPS_ATTR_RESP_TYPE 0x103B
+#define WPS_ATTR_UUID_E 0x1047
+#define WPS_ATTR_MANUFACTURER 0x1021
+#define WPS_ATTR_MODEL_NAME 0x1023
+#define WPS_ATTR_MODEL_NUMBER 0x1024
+#define WPS_ATTR_SERIAL_NUMBER 0x1042
+#define WPS_ATTR_PRIMARY_DEV_TYPE 0x1054
+#define WPS_ATTR_SEC_DEV_TYPE_LIST 0x1055
+#define WPS_ATTR_DEVICE_NAME 0x1011
+#define WPS_ATTR_CONF_METHOD 0x1008
+#define WPS_ATTR_RF_BANDS 0x103C
+#define WPS_ATTR_DEVICE_PWID 0x1012
+#define WPS_ATTR_REQUEST_TYPE 0x103A
+#define WPS_ATTR_ASSOCIATION_STATE 0x1002
+#define WPS_ATTR_CONFIG_ERROR 0x1009
+#define WPS_ATTR_VENDOR_EXT 0x1049
+#define WPS_ATTR_SELECTED_REGISTRAR 0x1041
+
+/* Value of WPS attribute "WPS_ATTR_DEVICE_NAME */
+#define WPS_MAX_DEVICE_NAME_LEN 32
+
+/* Value of WPS Request Type Attribute */
+#define WPS_REQ_TYPE_ENROLLEE_INFO_ONLY 0x00
+#define WPS_REQ_TYPE_ENROLLEE_OPEN_8021X 0x01
+#define WPS_REQ_TYPE_REGISTRAR 0x02
+#define WPS_REQ_TYPE_WLAN_MANAGER_REGISTRAR 0x03
+
+/* Value of WPS Response Type Attribute */
+#define WPS_RESPONSE_TYPE_INFO_ONLY 0x00
+#define WPS_RESPONSE_TYPE_8021X 0x01
+#define WPS_RESPONSE_TYPE_REGISTRAR 0x02
+#define WPS_RESPONSE_TYPE_AP 0x03
+
+/* Value of WPS WiFi Simple Configuration State Attribute */
+#define WPS_WSC_STATE_NOT_CONFIG 0x01
+#define WPS_WSC_STATE_CONFIG 0x02
+
+/* Value of WPS Version Attribute */
+#define WPS_VERSION_1 0x10
+
+/* Value of WPS Configuration Method Attribute */
+#define WPS_CONFIG_METHOD_FLASH 0x0001
+#define WPS_CONFIG_METHOD_ETHERNET 0x0002
+#define WPS_CONFIG_METHOD_LABEL 0x0004
+#define WPS_CONFIG_METHOD_DISPLAY 0x0008
+#define WPS_CONFIG_METHOD_E_NFC 0x0010
+#define WPS_CONFIG_METHOD_I_NFC 0x0020
+#define WPS_CONFIG_METHOD_NFC 0x0040
+#define WPS_CONFIG_METHOD_PBC 0x0080
+#define WPS_CONFIG_METHOD_KEYPAD 0x0100
+#define WPS_CONFIG_METHOD_VPBC 0x0280
+#define WPS_CONFIG_METHOD_PPBC 0x0480
+#define WPS_CONFIG_METHOD_VDISPLAY 0x2008
+#define WPS_CONFIG_METHOD_PDISPLAY 0x4008
+
+/* Value of Category ID of WPS Primary Device Type Attribute */
+#define WPS_PDT_CID_DISPLAYS 0x0007
+#define WPS_PDT_CID_MULIT_MEDIA 0x0008
+#define WPS_PDT_CID_RTK_WIDI WPS_PDT_CID_MULIT_MEDIA
+
+/* Value of Sub Category ID of WPS Primary Device Type Attribute */
+#define WPS_PDT_SCID_MEDIA_SERVER 0x0005
+#define WPS_PDT_SCID_RTK_DMP WPS_PDT_SCID_MEDIA_SERVER
+
+/* Value of Device Password ID */
+#define WPS_DPID_P 0x0000
+#define WPS_DPID_USER_SPEC 0x0001
+#define WPS_DPID_MACHINE_SPEC 0x0002
+#define WPS_DPID_REKEY 0x0003
+#define WPS_DPID_PBC 0x0004
+#define WPS_DPID_REGISTRAR_SPEC 0x0005
+
+/* Value of WPS RF Bands Attribute */
+#define WPS_RF_BANDS_2_4_GHZ 0x01
+#define WPS_RF_BANDS_5_GHZ 0x02
+
+/* Value of WPS Association State Attribute */
+#define WPS_ASSOC_STATE_NOT_ASSOCIATED 0x00
+#define WPS_ASSOC_STATE_CONNECTION_SUCCESS 0x01
+#define WPS_ASSOC_STATE_CONFIGURATION_FAILURE 0x02
+#define WPS_ASSOC_STATE_ASSOCIATION_FAILURE 0x03
+#define WPS_ASSOC_STATE_IP_FAILURE 0x04
+
+/* =====================P2P Section===================== */
+/* For P2P */
+#define P2POUI 0x506F9A09
+
+/* P2P Attribute ID */
+#define P2P_ATTR_STATUS 0x00
+#define P2P_ATTR_MINOR_REASON_CODE 0x01
+#define P2P_ATTR_CAPABILITY 0x02
+#define P2P_ATTR_DEVICE_ID 0x03
+#define P2P_ATTR_GO_INTENT 0x04
+#define P2P_ATTR_CONF_TIMEOUT 0x05
+#define P2P_ATTR_LISTEN_CH 0x06
+#define P2P_ATTR_GROUP_BSSID 0x07
+#define P2P_ATTR_EX_LISTEN_TIMING 0x08
+#define P2P_ATTR_INTENTED_IF_ADDR 0x09
+#define P2P_ATTR_MANAGEABILITY 0x0A
+#define P2P_ATTR_CH_LIST 0x0B
+#define P2P_ATTR_NOA 0x0C
+#define P2P_ATTR_DEVICE_INFO 0x0D
+#define P2P_ATTR_GROUP_INFO 0x0E
+#define P2P_ATTR_GROUP_ID 0x0F
+#define P2P_ATTR_INTERFACE 0x10
+#define P2P_ATTR_OPERATING_CH 0x11
+#define P2P_ATTR_INVITATION_FLAGS 0x12
+
+/* Value of Status Attribute */
+#define P2P_STATUS_SUCCESS 0x00
+#define P2P_STATUS_FAIL_INFO_UNAVAILABLE 0x01
+#define P2P_STATUS_FAIL_INCOMPATIBLE_PARAM 0x02
+#define P2P_STATUS_FAIL_LIMIT_REACHED 0x03
+#define P2P_STATUS_FAIL_INVALID_PARAM 0x04
+#define P2P_STATUS_FAIL_REQUEST_UNABLE 0x05
+#define P2P_STATUS_FAIL_PREVOUS_PROTO_ERR 0x06
+#define P2P_STATUS_FAIL_NO_COMMON_CH 0x07
+#define P2P_STATUS_FAIL_UNKNOWN_P2PGROUP 0x08
+#define P2P_STATUS_FAIL_BOTH_GOINTENT_15 0x09
+#define P2P_STATUS_FAIL_INCOMPATIBLE_PROVSION 0x0A
+#define P2P_STATUS_FAIL_USER_REJECT 0x0B
+
+/* Value of Inviation Flags Attribute */
+#define P2P_INVITATION_FLAGS_PERSISTENT BIT(0)
+
+#define DMP_P2P_DEVCAP_SUPPORT (P2P_DEVCAP_SERVICE_DISCOVERY | \
+ P2P_DEVCAP_CLIENT_DISCOVERABILITY | \
+ P2P_DEVCAP_CONCURRENT_OPERATION | \
+ P2P_DEVCAP_INVITATION_PROC)
+
+#define DMP_P2P_GRPCAP_SUPPORT (P2P_GRPCAP_INTRABSS)
+
+/* Value of Device Capability Bitmap */
+#define P2P_DEVCAP_SERVICE_DISCOVERY BIT(0)
+#define P2P_DEVCAP_CLIENT_DISCOVERABILITY BIT(1)
+#define P2P_DEVCAP_CONCURRENT_OPERATION BIT(2)
+#define P2P_DEVCAP_INFRA_MANAGED BIT(3)
+#define P2P_DEVCAP_DEVICE_LIMIT BIT(4)
+#define P2P_DEVCAP_INVITATION_PROC BIT(5)
+
+/* Value of Group Capability Bitmap */
+#define P2P_GRPCAP_GO BIT(0)
+#define P2P_GRPCAP_PERSISTENT_GROUP BIT(1)
+#define P2P_GRPCAP_GROUP_LIMIT BIT(2)
+#define P2P_GRPCAP_INTRABSS BIT(3)
+#define P2P_GRPCAP_CROSS_CONN BIT(4)
+#define P2P_GRPCAP_PERSISTENT_RECONN BIT(5)
+#define P2P_GRPCAP_GROUP_FORMATION BIT(6)
+
+/* P2P Public Action Frame (Management Frame) */
+#define P2P_PUB_ACTION_ACTION 0x09
+
+/* P2P Public Action Frame Type */
+#define P2P_GO_NEGO_REQ 0
+#define P2P_GO_NEGO_RESP 1
+#define P2P_GO_NEGO_CONF 2
+#define P2P_INVIT_REQ 3
+#define P2P_INVIT_RESP 4
+#define P2P_DEVDISC_REQ 5
+#define P2P_DEVDISC_RESP 6
+#define P2P_PROVISION_DISC_REQ 7
+#define P2P_PROVISION_DISC_RESP 8
+
+/* P2P Action Frame Type */
+#define P2P_NOTICE_OF_ABSENCE 0
+#define P2P_PRESENCE_REQUEST 1
+#define P2P_PRESENCE_RESPONSE 2
+#define P2P_GO_DISC_REQUEST 3
+
+#define P2P_MAX_PERSISTENT_GROUP_NUM 10
+
+#define P2P_PROVISIONING_SCAN_CNT 3
+
+#define P2P_WILDCARD_SSID_LEN 7
+
+/* default value, used when: (1)p2p disabed or (2)p2p enabled
+ * but only do 1 scan phase */
+#define P2P_FINDPHASE_EX_NONE 0
+/* used when p2p enabled and want to do 1 scan phase and
+ * P2P_FINDPHASE_EX_MAX-1 find phase */
+#define P2P_FINDPHASE_EX_FULL 1
+#define P2P_FINDPHASE_EX_SOCIAL_FIRST (P2P_FINDPHASE_EX_FULL+1)
+#define P2P_FINDPHASE_EX_MAX 4
+#define P2P_FINDPHASE_EX_SOCIAL_LAST P2P_FINDPHASE_EX_MAX
+
+/* 5 seconds timeout for sending the provision discovery request */
+#define P2P_PROVISION_TIMEOUT 5000
+/* 3 seconds timeout for sending the prov disc request concurrent mode */
+#define P2P_CONCURRENT_PROVISION_TIME 3000
+/* 5 seconds timeout for receiving the group negotiation response */
+#define P2P_GO_NEGO_TIMEOUT 5000
+/* 3 seconds timeout for sending the negotiation request under concurrent mode */
+#define P2P_CONCURRENT_GO_NEGO_TIME 3000
+/* 100ms */
+#define P2P_TX_PRESCAN_TIMEOUT 100
+/* 5 seconds timeout for sending the invitation request */
+#define P2P_INVITE_TIMEOUT 5000
+/* 3 seconds timeout for sending the invitation request under concurrent mode */
+#define P2P_CONCURRENT_INVITE_TIME 3000
+/* 25 seconds timeout to reset the scan channel (based on channel plan) */
+#define P2P_RESET_SCAN_CH 25000
+#define P2P_MAX_INTENT 15
+
+#define P2P_MAX_NOA_NUM 2
+
+/* WPS Configuration Method */
+#define WPS_CM_NONE 0x0000
+#define WPS_CM_LABEL 0x0004
+#define WPS_CM_DISPLYA 0x0008
+#define WPS_CM_EXTERNAL_NFC_TOKEN 0x0010
+#define WPS_CM_INTEGRATED_NFC_TOKEN 0x0020
+#define WPS_CM_NFC_INTERFACE 0x0040
+#define WPS_CM_PUSH_BUTTON 0x0080
+#define WPS_CM_KEYPAD 0x0100
+#define WPS_CM_SW_PUHS_BUTTON 0x0280
+#define WPS_CM_HW_PUHS_BUTTON 0x0480
+#define WPS_CM_SW_DISPLAY_P 0x2008
+#define WPS_CM_LCD_DISPLAY_P 0x4008
+
+enum P2P_ROLE {
+ P2P_ROLE_DISABLE = 0,
+ P2P_ROLE_DEVICE = 1,
+ P2P_ROLE_CLIENT = 2,
+ P2P_ROLE_GO = 3
+};
+
+enum P2P_STATE {
+ P2P_STATE_NONE = 0, /* P2P disable */
+ /* P2P had enabled and do nothing */
+ P2P_STATE_IDLE = 1,
+ P2P_STATE_LISTEN = 2, /* In pure listen state */
+ P2P_STATE_SCAN = 3, /* In scan phase */
+ /* In the listen state of find phase */
+ P2P_STATE_FIND_PHASE_LISTEN = 4,
+ /* In the search state of find phase */
+ P2P_STATE_FIND_PHASE_SEARCH = 5,
+ /* In P2P provisioning discovery */
+ P2P_STATE_TX_PROVISION_DIS_REQ = 6,
+ P2P_STATE_RX_PROVISION_DIS_RSP = 7,
+ P2P_STATE_RX_PROVISION_DIS_REQ = 8,
+ /* Doing the group owner negoitation handshake */
+ P2P_STATE_GONEGO_ING = 9,
+ /* finish the group negoitation handshake with success */
+ P2P_STATE_GONEGO_OK = 10,
+ /* finish the group negoitation handshake with failure */
+ P2P_STATE_GONEGO_FAIL = 11,
+ /* receiving the P2P Inviation request and match with the profile. */
+ P2P_STATE_RECV_INVITE_REQ_MATCH = 12,
+ /* Doing the P2P WPS */
+ P2P_STATE_PROVISIONING_ING = 13,
+ /* Finish the P2P WPS */
+ P2P_STATE_PROVISIONING_DONE = 14,
+ /* Transmit the P2P Invitation request */
+ P2P_STATE_TX_INVITE_REQ = 15,
+ /* Receiving the P2P Invitation response */
+ P2P_STATE_RX_INVITE_RESP_OK = 16,
+ /* receiving the P2P Inviation request and dismatch with the profile. */
+ P2P_STATE_RECV_INVITE_REQ_DISMATCH = 17,
+ /* receiving the P2P Inviation request and this wifi is GO. */
+ P2P_STATE_RECV_INVITE_REQ_GO = 18,
+ /* receiving the P2P Inviation request to join an existing P2P Group. */
+ P2P_STATE_RECV_INVITE_REQ_JOIN = 19,
+ /* recveing the P2P Inviation response with failure */
+ P2P_STATE_RX_INVITE_RESP_FAIL = 20,
+ /* receiving p2p negoitation response with information is not available */
+ P2P_STATE_RX_INFOR_NOREADY = 21,
+ /* sending p2p negoitation response with information is not available */
+ P2P_STATE_TX_INFOR_NOREADY = 22,
+};
+
+enum P2P_WPSINFO {
+ P2P_NO_WPSINFO = 0,
+ P2P_GOT_WPSINFO_PEER_DISPLAY_PIN = 1,
+ P2P_GOT_WPSINFO_SELF_DISPLAY_PIN = 2,
+ P2P_GOT_WPSINFO_PBC = 3,
+};
+
+#define P2P_PRIVATE_IOCTL_SET_LEN 64
+
+enum P2P_PROTO_WK_ID {
+ P2P_FIND_PHASE_WK = 0,
+ P2P_RESTORE_STATE_WK = 1,
+ P2P_PRE_TX_PROVDISC_PROCESS_WK = 2,
+ P2P_PRE_TX_NEGOREQ_PROCESS_WK = 3,
+ P2P_PRE_TX_INVITEREQ_PROCESS_WK = 4,
+ P2P_AP_P2P_CH_SWITCH_PROCESS_WK =5,
+ P2P_RO_CH_WK = 6,
+};
+
+enum P2P_PS_STATE {
+ P2P_PS_DISABLE = 0,
+ P2P_PS_ENABLE = 1,
+ P2P_PS_SCAN = 2,
+ P2P_PS_SCAN_DONE = 3,
+ P2P_PS_ALLSTASLEEP = 4, /* for P2P GO */
+};
+
+enum P2P_PS_MODE {
+ P2P_PS_NONE = 0,
+ P2P_PS_CTWINDOW = 1,
+ P2P_PS_NOA = 2,
+ P2P_PS_MIX = 3, /* CTWindow and NoA */
+};
+
+/* =====================WFD Section===================== */
+/* For Wi-Fi Display */
+#define WFD_ATTR_DEVICE_INFO 0x00
+#define WFD_ATTR_ASSOC_BSSID 0x01
+#define WFD_ATTR_COUPLED_SINK_INFO 0x06
+#define WFD_ATTR_LOCAL_IP_ADDR 0x08
+#define WFD_ATTR_SESSION_INFO 0x09
+#define WFD_ATTR_ALTER_MAC 0x0a
+
+/* For WFD Device Information Attribute */
+#define WFD_DEVINFO_SOURCE 0x0000
+#define WFD_DEVINFO_PSINK 0x0001
+#define WFD_DEVINFO_SSINK 0x0002
+#define WFD_DEVINFO_DUAL 0x0003
+
+#define WFD_DEVINFO_SESSION_AVAIL 0x0010
+#define WFD_DEVINFO_WSD 0x0040
+#define WFD_DEVINFO_PC_TDLS 0x0080
+#define WFD_DEVINFO_HDCP_SUPPORT 0x0100
+
+#define IP_MCAST_MAC(mac) \
+ ((mac[0] == 0x01) && (mac[1] == 0x00) && (mac[2] == 0x5e))
+#define ICMPV6_MCAST_MAC(mac) \
+ ((mac[0] == 0x33) && (mac[1] == 0x33) && (mac[2] != 0xff))
+
+#endif /* _WIFI_H_ */
diff --git a/drivers/staging/r8188eu/include/wlan_bssdef.h b/drivers/staging/r8188eu/include/wlan_bssdef.h
new file mode 100644
index 000000000000..eae8bac175b2
--- /dev/null
+++ b/drivers/staging/r8188eu/include/wlan_bssdef.h
@@ -0,0 +1,343 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __WLAN_BSSDEF_H__
+#define __WLAN_BSSDEF_H__
+
+#define MAX_IE_SZ 768
+
+#define NDIS_802_11_LENGTH_SSID 32
+#define NDIS_802_11_LENGTH_RATES 8
+#define NDIS_802_11_LENGTH_RATES_EX 16
+
+#define NDIS_802_11_RSSI long /* in dBm */
+
+struct ndis_802_11_ssid {
+ u32 SsidLength;
+ u8 Ssid[32];
+};
+
+enum NDIS_802_11_NETWORK_TYPE {
+ Ndis802_11FH,
+ Ndis802_11DS,
+ Ndis802_11OFDM5,
+ Ndis802_11OFDM24,
+ Ndis802_11NetworkTypeMax /* dummy upper bound */
+};
+
+struct ndis_802_11_config_fh {
+ u32 Length; /* Length of structure */
+ u32 HopPattern; /* As defined by 802.11, MSB set */
+ u32 HopSet; /* to one if non-802.11 */
+ u32 DwellTime; /* units are Kusec */
+};
+
+/*
+ * FW will only save the channel number in DSConfig.
+ * ODI Handler will convert the channel number to freq. number.
+ */
+struct ndis_802_11_config {
+ u32 Length; /* Length of structure */
+ u32 BeaconPeriod; /* units are Kusec */
+ u32 ATIMWindow; /* units are Kusec */
+ u32 DSConfig; /* Frequency, units are kHz */
+ struct ndis_802_11_config_fh FHConfig;
+};
+
+enum ndis_802_11_network_infra {
+ Ndis802_11IBSS,
+ Ndis802_11Infrastructure,
+ Ndis802_11AutoUnknown,
+ Ndis802_11InfrastructureMax, /* dummy upper bound */
+ Ndis802_11APMode
+};
+
+struct ndis_802_11_fixed_ie {
+ u8 Timestamp[8];
+ u16 BeaconInterval;
+ u16 Capabilities;
+};
+
+struct ndis_802_11_var_ie {
+ u8 ElementID;
+ u8 Length;
+ u8 data[1];
+};
+
+/*
+ * Length is the 4 bytes multiples of the sume of
+ * [ETH_ALEN] + 2 + sizeof (struct ndis_802_11_ssid) + sizeof (u32)
+ * + sizeof (NDIS_802_11_RSSI) + sizeof (enum NDIS_802_11_NETWORK_TYPE)
+ * + sizeof (struct ndis_802_11_config)
+ * + NDIS_802_11_LENGTH_RATES_EX + IELength
+ *
+ * Except the IELength, all other fields are fixed length.
+ * Therefore, we can define a macro to represent the partial sum. */
+
+enum ndis_802_11_auth_mode {
+ Ndis802_11AuthModeOpen,
+ Ndis802_11AuthModeShared,
+ Ndis802_11AuthModeAutoSwitch,
+ Ndis802_11AuthModeWPA,
+ Ndis802_11AuthModeWPAPSK,
+ Ndis802_11AuthModeWPANone,
+ Ndis802_11AuthModeWAPI,
+ Ndis802_11AuthModeMax /* Not a real mode, upper bound */
+};
+
+enum ndis_802_11_wep_status {
+ Ndis802_11WEPEnabled,
+ Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
+ Ndis802_11WEPDisabled,
+ Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
+ Ndis802_11WEPKeyAbsent,
+ Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
+ Ndis802_11WEPNotSupported,
+ Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
+ Ndis802_11Encryption2Enabled,
+ Ndis802_11Encryption2KeyAbsent,
+ Ndis802_11Encryption3Enabled,
+ Ndis802_11Encryption3KeyAbsent,
+ Ndis802_11_EncryptionWAPI
+};
+
+#define NDIS_802_11_AI_REQFI_CAPABILITIES 1
+#define NDIS_802_11_AI_REQFI_LISTENINTERVAL 2
+#define NDIS_802_11_AI_REQFI_CURRENTAPADDRESS 4
+
+#define NDIS_802_11_AI_RESFI_CAPABILITIES 1
+#define NDIS_802_11_AI_RESFI_STATUSCODE 2
+#define NDIS_802_11_AI_RESFI_ASSOCIATIONID 4
+
+struct ndis_802_11_ai_reqfi {
+ u16 Capabilities;
+ u16 ListenInterval;
+ unsigned char CurrentAPAddress[ETH_ALEN];
+};
+
+struct ndis_802_11_ai_resfi {
+ u16 Capabilities;
+ u16 StatusCode;
+ u16 AssociationId;
+};
+
+struct ndis_802_11_assoc_info {
+ u32 Length;
+ u16 AvailableRequestFixedIEs;
+ struct ndis_802_11_ai_reqfi RequestFixedIEs;
+ u32 RequestIELength;
+ u32 OffsetRequestIEs;
+ u16 AvailableResponseFixedIEs;
+ struct ndis_802_11_ai_resfi ResponseFixedIEs;
+ u32 ResponseIELength;
+ u32 OffsetResponseIEs;
+};
+
+enum ndis_802_11_reload_def {
+ Ndis802_11ReloadWEPKeys
+};
+
+/* Key mapping keys require a BSSID */
+struct ndis_802_11_key {
+ u32 Length; /* Length of this structure */
+ u32 KeyIndex;
+ u32 KeyLength; /* length of key in bytes */
+ unsigned char BSSID[ETH_ALEN];
+ unsigned long long KeyRSC;
+ u8 KeyMaterial[32]; /* var len depending on above field */
+};
+
+struct ndis_802_11_remove_key {
+ u32 Length; /* Length */
+ u32 KeyIndex;
+ unsigned char BSSID[ETH_ALEN];
+};
+
+struct ndis_802_11_wep {
+ u32 Length; /* Length of this structure */
+ u32 KeyIndex; /* 0 is the per-client key,
+ * 1-N are the global keys */
+ u32 KeyLength; /* length of key in bytes */
+ u8 KeyMaterial[16];/* variable len depending on above field */
+};
+
+struct ndis_802_11_auth_req {
+ u32 Length; /* Length of structure */
+ unsigned char Bssid[ETH_ALEN];
+ u32 Flags;
+};
+
+enum ndis_802_11_status_type {
+ Ndis802_11StatusType_Authentication,
+ Ndis802_11StatusType_MediaStreamMode,
+ Ndis802_11StatusType_PMKID_CandidateList,
+ Ndis802_11StatusTypeMax /* not a real type, defined as
+ * an upper bound */
+};
+
+struct ndis_802_11_status_ind {
+ enum ndis_802_11_status_type StatusType;
+};
+
+/* mask for authentication/integrity fields */
+#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS 0x0f
+#define NDIS_802_11_AUTH_REQUEST_REAUTH 0x01
+#define NDIS_802_11_AUTH_REQUEST_KEYUPDATE 0x02
+#define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR 0x06
+#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR 0x0E
+
+/* MIC check time, 60 seconds. */
+#define MIC_CHECK_TIME 60000000
+
+struct ndis_802_11_auth_evt {
+ struct ndis_802_11_status_ind Status;
+ struct ndis_802_11_auth_req Request[1];
+};
+
+struct ndis_802_11_test {
+ u32 Length;
+ u32 Type;
+ union {
+ struct ndis_802_11_auth_evt AuthenticationEvent;
+ NDIS_802_11_RSSI RssiTrigger;
+ } tt;
+};
+
+#ifndef Ndis802_11APMode
+#define Ndis802_11APMode (Ndis802_11InfrastructureMax+1)
+#endif
+
+struct wlan_phy_info {
+ u8 SignalStrength;/* in percentage) */
+ u8 SignalQuality;/* in percentage) */
+ u8 Optimum_antenna; /* for Antenna diversity */
+ u8 Reserved_0;
+};
+
+struct wlan_bcn_info {
+ /* these infor get from rtw_get_encrypt_info when
+ * * translate scan to UI */
+ u8 encryp_protocol;/* ENCRYP_PROTOCOL_E: OPEN/WEP/WPA/WPA2/WAPI */
+ int group_cipher; /* WPA/WPA2 group cipher */
+ int pairwise_cipher;/* WPA/WPA2/WEP pairwise cipher */
+ int is_8021x;
+
+ /* bwmode 20/40 and ch_offset UP/LOW */
+ unsigned short ht_cap_info;
+ unsigned char ht_info_infos_0;
+};
+
+/* temporally add #pragma pack for structure alignment issue of
+* struct wlan_bssid_ex and get_struct wlan_bssid_ex_sz()
+*/
+struct wlan_bssid_ex {
+ u32 Length;
+ unsigned char MacAddress[ETH_ALEN];
+ u8 Reserved[2];/* 0]: IS beacon frame */
+ struct ndis_802_11_ssid Ssid;
+ u32 Privacy;
+ NDIS_802_11_RSSI Rssi;/* in dBM,raw data ,get from PHY) */
+ enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
+ struct ndis_802_11_config Configuration;
+ enum ndis_802_11_network_infra InfrastructureMode;
+ unsigned char SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
+ struct wlan_phy_info PhyInfo;
+ u32 IELength;
+ u8 IEs[MAX_IE_SZ]; /* timestamp, beacon interval, and
+ * capability information) */
+} __packed;
+
+static inline uint get_wlan_bssid_ex_sz(struct wlan_bssid_ex *bss)
+{
+ return sizeof(struct wlan_bssid_ex) - MAX_IE_SZ + bss->IELength;
+}
+
+struct wlan_network {
+ struct list_head list;
+ int network_type; /* refer to ieee80211.h for WIRELESS_11A/B/G */
+ int fixed; /* set fixed when not to be removed
+ * in site-surveying */
+ unsigned long last_scanned; /* timestamp for the network */
+ int aid; /* will only be valid when a BSS is joinned. */
+ int join_res;
+ struct wlan_bssid_ex network; /* must be the last item */
+ struct wlan_bcn_info BcnInfo;
+};
+
+enum VRTL_CARRIER_SENSE {
+ DISABLE_VCS,
+ ENABLE_VCS,
+ AUTO_VCS
+};
+
+enum VCS_TYPE {
+ NONE_VCS,
+ RTS_CTS,
+ CTS_TO_SELF
+};
+
+#define PWR_CAM 0
+#define PWR_MINPS 1
+#define PWR_MAXPS 2
+#define PWR_UAPSD 3
+#define PWR_VOIP 4
+
+enum UAPSD_MAX_SP {
+ NO_LIMIT,
+ TWO_MSDU,
+ FOUR_MSDU,
+ SIX_MSDU
+};
+
+#define NUM_PRE_AUTH_KEY 16
+#define NUM_PMKID_CACHE NUM_PRE_AUTH_KEY
+
+/*
+* WPA2
+*/
+
+struct pmkid_candidate {
+ unsigned char BSSID[ETH_ALEN];
+ u32 Flags;
+};
+
+struct ndis_802_11_pmkid_list {
+ u32 Version; /* Version of the structure */
+ u32 NumCandidates; /* No. of pmkid candidates */
+ struct pmkid_candidate CandidateList[1];
+};
+
+struct ndis_802_11_auth_encrypt {
+ enum ndis_802_11_auth_mode AuthModeSupported;
+ enum ndis_802_11_wep_status EncryptStatusSupported;
+};
+
+struct ndis_802_11_cap {
+ u32 Length;
+ u32 Version;
+ u32 NoOfPMKIDs;
+ u32 NoOfAuthEncryptPairsSupported;
+ struct ndis_802_11_auth_encrypt AuthenticationEncryptionSupported[1];
+};
+
+u8 key_2char2num(u8 hch, u8 lch);
+u8 key_char2num(u8 ch);
+u8 str_2char2num(u8 hch, u8 lch);
+
+#endif /* ifndef WLAN_BSSDEF_H_ */
diff --git a/drivers/staging/r8188eu/include/xmit_osdep.h b/drivers/staging/r8188eu/include/xmit_osdep.h
new file mode 100644
index 000000000000..2ff622ba24f0
--- /dev/null
+++ b/drivers/staging/r8188eu/include/xmit_osdep.h
@@ -0,0 +1,67 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __XMIT_OSDEP_H_
+#define __XMIT_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+struct pkt_file {
+ struct sk_buff *pkt;
+ size_t pkt_len; /* the remainder length of the open_file */
+ unsigned char *cur_buffer;
+ u8 *buf_start;
+ u8 *cur_addr;
+ size_t buf_len;
+};
+
+extern int rtw_ht_enable;
+extern int rtw_cbw40_enable;
+extern int rtw_ampdu_enable;/* for enable tx_ampdu */
+
+#define NR_XMITFRAME 256
+
+struct xmit_priv;
+struct pkt_attrib;
+struct sta_xmit_priv;
+struct xmit_frame;
+struct xmit_buf;
+
+int rtw_xmit_entry(struct sk_buff *pkt, struct net_device *pnetdev);
+
+void rtw_os_xmit_schedule(struct adapter *padapter);
+
+int rtw_os_xmit_resource_alloc(struct adapter *padapter,
+ struct xmit_buf *pxmitbuf, u32 alloc_sz);
+void rtw_os_xmit_resource_free(struct adapter *padapter,
+ struct xmit_buf *pxmitbuf, u32 free_sz);
+
+void rtw_set_tx_chksum_offload(struct sk_buff *pkt, struct pkt_attrib *pattrib);
+
+uint rtw_remainder_len(struct pkt_file *pfile);
+void _rtw_open_pktfile(struct sk_buff *pkt, struct pkt_file *pfile);
+uint _rtw_pktfile_read(struct pkt_file *pfile, u8 *rmem, uint rlen);
+int rtw_endofpktfile(struct pkt_file *pfile);
+
+void rtw_os_pkt_complete(struct adapter *padapter, struct sk_buff *pkt);
+void rtw_os_xmit_complete(struct adapter *padapter,
+ struct xmit_frame *pxframe);
+
+#endif /* __XMIT_OSDEP_H_ */
--
2.31.1
next prev parent reply other threads:[~2021-07-27 23:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-27 23:22 [PATCH v4 0/6] staging: r8188eu: add newer/better RTL8188eu driver Phillip Potter
2021-07-27 23:22 ` [PATCH v4 1/6] staging: r8188eu: introduce new core dir for " Phillip Potter
2021-07-27 23:22 ` [PATCH v4 2/6] staging: r8188eu: introduce new hal " Phillip Potter
2021-07-27 23:22 ` [PATCH v4 3/6] staging: r8188eu: introduce new os_dep " Phillip Potter
2021-07-27 23:22 ` Phillip Potter [this message]
2021-07-27 23:22 ` [PATCH v4 5/6] staging: r8188eu: introduce new supporting files " Phillip Potter
2021-07-27 23:22 ` [PATCH v4 6/6] staging: r8188eu: attach newly imported driver to build system Phillip Potter
2021-07-28 7:46 ` [PATCH v4 0/6] staging: r8188eu: add newer/better RTL8188eu driver Martin Kaiser
2021-07-28 16:00 ` Phillip Potter
2021-07-28 16:00 ` Phillip Potter
2021-07-29 13:37 ` Martin Kaiser
2021-07-29 14:00 ` Greg KH
2021-07-29 16:47 ` Larry Finger
2021-08-01 17:50 ` Martin Kaiser
2021-07-28 18:14 ` Greg KH
2021-07-28 18:41 ` Larry Finger
2021-07-28 18:55 ` Greg KH
2021-07-28 22:17 ` Phillip Potter
2021-07-28 22:17 ` Phillip Potter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210727232219.2948-5-phil@philpotter.co.uk \
--to=phil@philpotter.co.uk \
--cc=Larry.Finger@lwfinger.net \
--cc=dan.carpenter@oracle.com \
--cc=fabioaiuto83@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=martin@kaiser.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.