All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>,
	"Marek Behún" <kabel@kernel.org>, "Marc Zyngier" <maz@kernel.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] PCI: aardvark: Fix reading MSI interrupt number
Date: Sun, 15 Aug 2021 12:36:22 +0200	[thread overview]
Message-ID: <20210815103624.19528-2-pali@kernel.org> (raw)
In-Reply-To: <20210815103624.19528-1-pali@kernel.org>

Experiments showed that in register PCIE_MSI_PAYLOAD_REG is stored number
of the last received MSI interrupt and not number of MSI interrupt which
belongs to msi_idx bit. Therefore this implies that aardvark HW can cache
only bits [4:0] of received MSI interrupts with effectively means that it
supports only MSI interrupts with numbers 0-31.

Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt
number. Instead ensure that pci-aardvark.c configures only MSI numbers in
range 0-31 and then msi_idx contains correct received MSI number.

Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
---
 drivers/pci/controller/pci-aardvark.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 5e4febdbdd33..bacfccee44fe 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1199,7 +1199,6 @@ static void advk_pcie_remove_irq_domain(struct advk_pcie *pcie)
 static void advk_pcie_handle_msi(struct advk_pcie *pcie)
 {
 	u32 msi_val, msi_mask, msi_status, msi_idx;
-	u16 msi_data;
 	int virq;
 
 	msi_mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
@@ -1210,17 +1209,13 @@ static void advk_pcie_handle_msi(struct advk_pcie *pcie)
 		if (!(BIT(msi_idx) & msi_status))
 			continue;
 
-		/*
-		 * msi_idx contains bits [4:0] of the msi_data and msi_data
-		 * contains 16bit MSI interrupt number from MSI inner domain
-		 */
 		advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG);
-		msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & PCIE_MSI_DATA_MASK;
-		virq = irq_find_mapping(pcie->msi_inner_domain, msi_data);
+
+		virq = irq_find_mapping(pcie->msi_inner_domain, msi_idx);
 		if (virq)
 			generic_handle_irq(virq);
 		else
-			dev_err_ratelimited(&pcie->pdev->dev, "unexpected MSI 0x%04hx\n", msi_data);
+			dev_err_ratelimited(&pcie->pdev->dev, "unexpected MSI 0x%02x\n", msi_idx);
 	}
 
 	advk_writel(pcie, PCIE_ISR0_MSI_INT_PENDING,
-- 
2.20.1


  reply	other threads:[~2021-08-15 10:37 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-15 10:36 [PATCH 0/3] PCI: aardvark: MSI interrupt fixes Pali Rohár
2021-08-15 10:36 ` Pali Rohár [this message]
2021-08-15 10:36 ` [PATCH 2/3] PCI: aardvark: Fix masking MSI interrupts Pali Rohár
2021-08-15 16:56   ` Marc Zyngier
2021-08-15 17:36     ` Pali Rohár
2021-08-15 21:55       ` Marc Zyngier
2021-08-15 23:10         ` Pali Rohár
2021-08-15 10:36 ` [PATCH 3/3] PCI: aardvark: Enable MSI-X support Pali Rohár
2021-08-23 16:40 ` [PATCH v2 0/3] PCI: aardvark: MSI interrupt fixes Pali Rohár
2021-08-23 16:40   ` [PATCH v2 1/3] PCI: aardvark: Fix reading MSI interrupt number Pali Rohár
2021-08-23 16:52     ` Marc Zyngier
2021-08-23 16:40   ` [PATCH v2 2/3] PCI: aardvark: Fix masking MSI interrupts Pali Rohár
2021-08-23 16:40   ` [PATCH v2 3/3] PCI: aardvark: Enable MSI-X support Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210815103624.19528-2-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=kabel@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=robh@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.