All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH 9/9] Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to Kconfig
Date: Sat, 21 Aug 2021 13:50:19 -0400	[thread overview]
Message-ID: <20210821175019.24180-9-trini@konsulko.com> (raw)
In-Reply-To: <20210821175019.24180-1-trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT

Signed-off-by: Tom Rini <trini@konsulko.com>
---
 configs/ls1021aiot_sdcard_defconfig | 1 +
 configs/ls1046aqds_nand_defconfig   | 1 +
 include/configs/ls1021aiot.h        | 1 -
 include/configs/ls1046a_common.h    | 1 -
 4 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig
index 7c198988b889..e8fdd2a37992 100644
--- a/configs/ls1021aiot_sdcard_defconfig
+++ b/configs/ls1021aiot_sdcard_defconfig
@@ -16,6 +16,7 @@ CONFIG_MISC_INIT_R=y
 CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMINFO=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index b099b8452a4d..7483308ba756 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -28,6 +28,7 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 6c1d1beb7278..7c29bedb8360 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -63,7 +63,6 @@
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_I2C
 #define CONFIG_SPL_WATCHDOG
 #define CONFIG_SPL_MMC_SUPPORT
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 289acc02d380..aa222e026931 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -108,7 +108,6 @@
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_WATCHDOG
 #define CONFIG_SPL_I2C
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC
-- 
2.17.1


  parent reply	other threads:[~2021-08-21 17:51 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-21 17:50 [PATCH 1/9] Kconfig: Use spaces not tabs in Kconfig entires Tom Rini
2021-08-21 17:50 ` [PATCH 2/9] global: Remove unused or unnecessary CONFIG symbols related to DDR Tom Rini
2021-08-21 17:50 ` [PATCH 3/9] mvebu: Migrate CONFIG_DDR_32BIT/64BIT to Kconfig Tom Rini
2021-08-24 10:53   ` Marek Behún
2021-08-31  5:45   ` Stefan Roese
2021-08-21 17:50 ` [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE Tom Rini
2021-08-22 11:35   ` Marek Behún
2021-08-22 11:40     ` Pali Rohár
2021-08-24 10:52   ` Marek Behún
2021-08-31  5:51   ` Stefan Roese
2021-08-31 12:43     ` Tom Rini
2021-09-01  5:27       ` Stefan Roese
2021-09-01 11:29         ` Tom Rini
2021-09-01 14:32           ` Stefan Roese
2021-08-21 17:50 ` [PATCH 5/9] mvebe: Migrate CONFIG_DDR_LOG_LEVEL to Kconfig Tom Rini
2021-08-21 17:50 ` [PATCH 6/9] ddr: Migrate DDR_SPD " Tom Rini
2021-08-21 17:50 ` [PATCH 7/9] nxp: Migrate CONFIG_DDR_CLK_FREQ " Tom Rini
2021-08-21 17:50 ` [PATCH 8/9] nxp: Migrate a number of DDR related symbols " Tom Rini
2021-08-21 17:50 ` Tom Rini [this message]
2021-08-31 22:09 ` [PATCH 1/9] Kconfig: Use spaces not tabs in Kconfig entires Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210821175019.24180-9-trini@konsulko.com \
    --to=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.