From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Zhengjun Zhang <zhangzhengjun@aicrobo.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 5.4 10/48] USB: serial: option: add new VID/PID to support Fibocom FG150
Date: Wed, 1 Sep 2021 14:28:00 +0200 [thread overview]
Message-ID: <20210901122253.747809165@linuxfoundation.org> (raw)
In-Reply-To: <20210901122253.388326997@linuxfoundation.org>
From: Zhengjun Zhang <zhangzhengjun@aicrobo.com>
commit 2829a4e3cf3a6ac2fa3cdb681b37574630fb9c1a upstream.
Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform,
support Sub-6G band.
Here are the outputs of lsusb -v and usb-devices:
> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
> D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
> P: Vendor=2cb7 ProdID=010b Rev=04.14
> S: Manufacturer=Fibocom
> S: Product=Fibocom Modem_SN:XXXXXXXX
> S: SerialNumber=XXXXXXXX
> C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
> I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.20
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 9
> idVendor 0x2cb7 Fibocom
> idProduct 0x010b
> bcdDevice 4.14
> iManufacturer 1 Fibocom
> iProduct 2 Fibocom Modem_SN:XXXXXXXX
> iSerial 3 XXXXXXXX
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 0x00e6
> bNumInterfaces 5
> bConfigurationValue 1
> iConfiguration 4 RNDIS_DUN_DIAG_ADB
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 896mA
> Interface Association:
> bLength 8
> bDescriptorType 11
> bFirstInterface 0
> bInterfaceCount 2
> bFunctionClass 239 Miscellaneous Device
> bFunctionSubClass 4
> bFunctionProtocol 1
> iFunction 7 RNDIS
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 239 Miscellaneous Device
> bInterfaceSubClass 4
> bInterfaceProtocol 1
> iInterface 0
> ** UNRECOGNIZED: 05 24 00 10 01
> ** UNRECOGNIZED: 05 24 01 00 01
> ** UNRECOGNIZED: 04 24 02 00
> ** UNRECOGNIZED: 05 24 06 00 01
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 9
> bMaxBurst 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 10 CDC Data
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x8e EP 14 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 6
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x0f EP 15 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 6
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> ** UNRECOGNIZED: 05 24 00 10 01
> ** UNRECOGNIZED: 05 24 01 00 00
> ** UNRECOGNIZED: 04 24 02 02
> ** UNRECOGNIZED: 05 24 06 00 00
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x000a 1x 10 bytes
> bInterval 9
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 48
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 4
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 66
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 0x0016
> bNumDeviceCaps 2
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000006
> BESL Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000f
> Device can operate at Low Speed (1Mbps)
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 1 micro seconds
> bU2DevExitLat 500 micro seconds
> Device Status: 0x0000
> (Bus Powered)
Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2074,6 +2074,8 @@ static const struct usb_device_id option
.driver_info = RSVD(4) | RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
.driver_info = RSVD(6) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
next prev parent reply other threads:[~2021-09-01 12:32 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-01 12:27 [PATCH 5.4 00/48] 5.4.144-rc1 review Greg Kroah-Hartman
2021-09-01 12:27 ` [PATCH 5.4 01/48] net: qrtr: fix another OOB Read in qrtr_endpoint_post Greg Kroah-Hartman
2021-09-01 12:27 ` [PATCH 5.4 02/48] ARC: Fix CONFIG_STACKDEPOT Greg Kroah-Hartman
2021-09-01 12:27 ` [PATCH 5.4 03/48] netfilter: conntrack: collect all entries in one cycle Greg Kroah-Hartman
2021-09-01 12:27 ` [PATCH 5.4 04/48] once: Fix panic when module unload Greg Kroah-Hartman
2021-09-01 12:27 ` [PATCH 5.4 05/48] ovl: fix uninitialized pointer read in ovl_lookup_real_one() Greg Kroah-Hartman
2021-09-01 12:27 ` [PATCH 5.4 06/48] mmc: sdhci-msm: Update the software timeout value for sdhc Greg Kroah-Hartman
2021-09-01 12:27 ` [PATCH 5.4 07/48] mm, oom: make the calculation of oom badness more accurate Greg Kroah-Hartman
2021-09-01 12:27 ` [PATCH 5.4 08/48] can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters Greg Kroah-Hartman
2021-09-01 12:27 ` [PATCH 5.4 09/48] Revert "USB: serial: ch341: fix character loss at high transfer rates" Greg Kroah-Hartman
2021-09-01 12:28 ` Greg Kroah-Hartman [this message]
2021-09-01 12:28 ` [PATCH 5.4 11/48] usb: dwc3: gadget: Fix dwc3_calc_trbs_left() Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 12/48] usb: dwc3: gadget: Stop EP0 transfers during pullup disable Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 13/48] scsi: core: Fix hang of freezing queue between blocking and running device Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 14/48] RDMA/bnxt_re: Add missing spin lock initialization Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 15/48] IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs() Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 16/48] e1000e: Fix the max snoop/no-snoop latency for 10M Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 17/48] RDMA/efa: Free IRQ vectors on error flow Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 18/48] ip_gre: add validation for csum_start Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 19/48] xgene-v2: Fix a resource leak in the error handling path of xge_probe() Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 20/48] net: marvell: fix MVNETA_TX_IN_PRGRS bit number Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 21/48] rtnetlink: Return correct error on changing device netns Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 22/48] net: hns3: clear hardware resource when loading driver Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 23/48] net: hns3: fix duplicate node in VLAN list Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 24/48] net: hns3: fix get wrong pfc_en when query PFC configuration Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 25/48] drm/i915: Fix syncmap memory leak Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 26/48] usb: gadget: u_audio: fix race condition on endpoint stop Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 27/48] perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32 Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 28/48] opp: remove WARN when no valid OPPs remain Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 29/48] virtio: Improve vq->broken access to avoid any compiler optimization Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 30/48] virtio_pci: Support surprise removal of virtio pci device Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 31/48] vringh: Use wiov->used to check for read/write desc order Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 32/48] qed: qed ll2 race condition fixes Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 33/48] qed: Fix null-pointer dereference in qed_rdma_create_qp() Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 34/48] drm: Copy drm_wait_vblank to user before returning Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 35/48] drm/nouveau/disp: power down unused DP links during init Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 36/48] net/rds: dma_map_sg is entitled to merge entries Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 37/48] btrfs: fix race between marking inode needs to be logged and log syncing Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 38/48] vt_kdsetmode: extend console locking Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 39/48] bpf: Track contents of read-only maps as scalars Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 40/48] bpf: Fix cast to pointer from integer of different size warning Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 41/48] net: dsa: mt7530: fix VLAN traffic leaks again Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 42/48] KVM: x86/mmu: Treat NX as used (not reserved) for all !TDP shadow MMUs Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 43/48] arm64: dts: qcom: msm8994-angler: Fix gpio-reserved-ranges 85-88 Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 44/48] btrfs: fix NULL pointer dereference when deleting device by invalid id Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 45/48] Revert "floppy: reintroduce O_NDELAY fix" Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 46/48] Revert "parisc: Add assembly implementations for memset, strlen, strcpy, strncpy and strcat" Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 47/48] net: dont unconditionally copy_from_user a struct ifreq for socket ioctls Greg Kroah-Hartman
2021-09-01 12:28 ` [PATCH 5.4 48/48] audit: move put_tree() to avoid trim_trees refcount underflow and UAF Greg Kroah-Hartman
2021-09-01 15:58 ` [PATCH 5.4 00/48] 5.4.144-rc1 review Florian Fainelli
2021-09-01 19:21 ` Jon Hunter
2021-09-01 21:22 ` Shuah Khan
2021-09-02 1:07 ` Samuel Zou
2021-09-02 8:19 ` Naresh Kamboju
2021-09-02 11:50 ` Sudip Mukherjee
2021-09-02 21:50 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210901122253.747809165@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=zhangzhengjun@aicrobo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.