[PATCH v4 0/3] add initial support for exynosautov9

[Chanho Park <chanho61.park@samsung.com>]

This patchset supports minimal set for ExynosAuto v9 SoC and SADK board.
This contains serial_0 as uart console and ufs_0 for rootfs storage.
Regarding UFS, it depends on UFS patchset[1].

[1]: https://lore.kernel.org/linux-samsung-soc/20211007080934.108804-1-chanho61.park@samsung.com/T/#t

Changes since v3:
- Correct pinctrl label naming
- Fix dtbs_check warnings / cpu, gic, and uart address
- Correct ufs-core-clock node name

Changes since v2:
- pinctrl patch has been merged. So, remove it from v3 patchset.
- Separate mfd/syscon.yaml dt-binding patch
- Use "-pins" suffix for all pinctrl node name but do not follow this for labels.

Changes since v1:
- add static and  __initconst of patch1
- Use pin and pins suffix for pinctrl nodes
- Remove non-SoC pins
- Move fixed rate clock nodes out of soc@0
- Add cortex-a76 compatibles to cpu and pmu node.
- Use lowercase of address representations
- Add pmu / syscon compatible.

Chanho Park (3):
  dt-bindings: mfd: add samsung,exynosautov9-sysreg compatible
  arm64: dts: exynos: add initial support for exynosautov9 SoC
  arm64: dts: exynos: add minimal support for exynosautov9 sadk board

 .../bindings/arm/samsung/samsung-boards.yaml  |    6 +
 .../devicetree/bindings/mfd/syscon.yaml       |    1 +
 arch/arm64/boot/dts/exynos/Makefile           |    3 +-
 .../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 1189 +++++++++++++++++
 .../boot/dts/exynos/exynosautov9-sadk.dts     |   56 +
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi  |  301 +++++
 6 files changed, 1555 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9.dtsi

-- 
2.33.0