All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Gardon <bgardon@google.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>, Peter Xu <peterx@redhat.com>,
	Sean Christopherson <seanjc@google.com>,
	Peter Shier <pshier@google.com>,
	David Matlack <dmatlack@google.com>,
	Mingwei Zhang <mizhang@google.com>,
	Yulei Zhang <yulei.kernel@gmail.com>,
	Wanpeng Li <kernellwp@gmail.com>,
	Xiao Guangrong <xiaoguangrong.eric@gmail.com>,
	Kai Huang <kai.huang@intel.com>,
	Keqian Zhu <zhukeqian1@huawei.com>,
	David Hildenbrand <david@redhat.com>,
	Ben Gardon <bgardon@google.com>
Subject: [PATCH 11/15] KVM: x86/MMU: Refactor vmx_get_mt_mask
Date: Mon, 15 Nov 2021 15:45:59 -0800	[thread overview]
Message-ID: <20211115234603.2908381-12-bgardon@google.com> (raw)
In-Reply-To: <20211115234603.2908381-1-bgardon@google.com>

Remove the gotos from vmx_get_mt_mask to make it easier to separate out
the parts which do not depend on vcpu state.

No functional change intended.


Signed-off-by: Ben Gardon <bgardon@google.com>
---
 arch/x86/kvm/vmx/vmx.c | 23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 71f54d85f104..77f45c005f28 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -6987,7 +6987,6 @@ static int __init vmx_check_processor_compat(void)
 static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 {
 	u8 cache;
-	u64 ipat = 0;
 
 	/* We wanted to honor guest CD/MTRR/PAT, but doing so could result in
 	 * memory aliases with conflicting memory types and sometimes MCEs.
@@ -7007,30 +7006,22 @@ static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 	 * EPT memory type is used to emulate guest CD/MTRR.
 	 */
 
-	if (is_mmio) {
-		cache = MTRR_TYPE_UNCACHABLE;
-		goto exit;
-	}
+	if (is_mmio)
+		return MTRR_TYPE_UNCACHABLE << VMX_EPT_MT_EPTE_SHIFT;
 
-	if (!kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
-		ipat = VMX_EPT_IPAT_BIT;
-		cache = MTRR_TYPE_WRBACK;
-		goto exit;
-	}
+	if (!kvm_arch_has_noncoherent_dma(vcpu->kvm))
+		return (MTRR_TYPE_WRBACK << VMX_EPT_MT_EPTE_SHIFT) | VMX_EPT_IPAT_BIT;
 
 	if (kvm_read_cr0(vcpu) & X86_CR0_CD) {
-		ipat = VMX_EPT_IPAT_BIT;
 		if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED))
 			cache = MTRR_TYPE_WRBACK;
 		else
 			cache = MTRR_TYPE_UNCACHABLE;
-		goto exit;
-	}
 
-	cache = kvm_mtrr_get_guest_memory_type(vcpu, gfn);
+		return (cache << VMX_EPT_MT_EPTE_SHIFT) | VMX_EPT_IPAT_BIT;
+	}
 
-exit:
-	return (cache << VMX_EPT_MT_EPTE_SHIFT) | ipat;
+	return kvm_mtrr_get_guest_memory_type(vcpu, gfn) << VMX_EPT_MT_EPTE_SHIFT;
 }
 
 static void vmcs_set_secondary_exec_control(struct vcpu_vmx *vmx, u32 new_ctl)
-- 
2.34.0.rc1.387.gb447b232ab-goog


  parent reply	other threads:[~2021-11-16  3:17 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-15 23:45 [PATCH 00/15] Currently disabling dirty logging with the TDP MMU is extremely slow. On a 96 vCPU / 96G VM it takes ~45 seconds to disable dirty logging with the TDP MMU, as opposed to ~3.5 seconds with the legacy MMU. This series optimizes TLB flushes and introduces in-place large page promotion, to bring the disable dirty log time down to ~2 seconds Ben Gardon
2021-11-15 23:45 ` [PATCH 01/15] KVM: x86/mmu: Remove redundant flushes when disabling dirty logging Ben Gardon
2021-11-18  8:26   ` Paolo Bonzini
2021-11-15 23:45 ` [PATCH 02/15] KVM: x86/mmu: Introduce vcpu_make_spte Ben Gardon
2021-11-15 23:45 ` [PATCH 03/15] KVM: x86/mmu: Factor wrprot for nested PML out of make_spte Ben Gardon
2021-11-15 23:45 ` [PATCH 04/15] KVM: x86/mmu: Factor mt_mask " Ben Gardon
2021-11-15 23:45 ` [PATCH 05/15] KVM: x86/mmu: Remove need for a vcpu from kvm_slot_page_track_is_active Ben Gardon
2021-11-18  8:25   ` Paolo Bonzini
2021-11-15 23:45 ` [PATCH 06/15] KVM: x86/mmu: Remove need for a vcpu from mmu_try_to_unsync_pages Ben Gardon
2021-11-18  8:25   ` Paolo Bonzini
2021-11-15 23:45 ` [PATCH 07/15] KVM: x86/mmu: Factor shadow_zero_check out of make_spte Ben Gardon
2021-11-15 23:45 ` [PATCH 08/15] KVM: x86/mmu: Replace vcpu argument with kvm pointer in make_spte Ben Gardon
2021-11-15 23:45 ` [PATCH 09/15] KVM: x86/mmu: Factor out the meat of reset_tdp_shadow_zero_bits_mask Ben Gardon
2021-11-15 23:45 ` [PATCH 10/15] KVM: x86/mmu: Propagate memslot const qualifier Ben Gardon
2021-11-18  8:27   ` Paolo Bonzini
2021-11-15 23:45 ` Ben Gardon [this message]
2021-11-18  8:30   ` [PATCH 11/15] KVM: x86/MMU: Refactor vmx_get_mt_mask Paolo Bonzini
2021-11-18 15:30     ` Sean Christopherson
2021-11-19  9:02       ` Paolo Bonzini
2021-11-22 18:11         ` Ben Gardon
2021-11-22 18:46           ` Sean Christopherson
2021-11-15 23:46 ` [PATCH 12/15] KVM: x86/mmu: Factor out part of vmx_get_mt_mask which does not depend on vcpu Ben Gardon
2021-11-15 23:46 ` [PATCH 13/15] KVM: x86/mmu: Add try_get_mt_mask to x86_ops Ben Gardon
2021-11-15 23:46 ` [PATCH 14/15] KVM: x86/mmu: Make kvm_is_mmio_pfn usable outside of spte.c Ben Gardon
2021-11-15 23:46 ` [PATCH 15/15] KVM: x86/mmu: Promote pages in-place when disabling dirty logging Ben Gardon
2021-11-25  4:18   ` Peter Xu
2021-11-29 18:31     ` Ben Gardon
2021-11-30  0:13       ` Sean Christopherson
2021-11-30  7:28       ` Peter Xu
2021-11-30 16:01         ` Sean Christopherson
2021-12-01  1:59           ` Peter Xu
2021-11-15 23:58 ` [PATCH 00/15] Currently disabling dirty logging with the TDP MMU is extremely slow. On a 96 vCPU / 96G VM it takes ~45 seconds to disable dirty logging with the TDP MMU, as opposed to ~3.5 seconds with the legacy MMU. This series optimizes TLB flushes and introduces in-place large page promotion, to bring the disable dirty log time down to ~2 seconds Ben Gardon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211115234603.2908381-12-bgardon@google.com \
    --to=bgardon@google.com \
    --cc=david@redhat.com \
    --cc=dmatlack@google.com \
    --cc=kai.huang@intel.com \
    --cc=kernellwp@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mizhang@google.com \
    --cc=pbonzini@redhat.com \
    --cc=peterx@redhat.com \
    --cc=pshier@google.com \
    --cc=seanjc@google.com \
    --cc=xiaoguangrong.eric@gmail.com \
    --cc=yulei.kernel@gmail.com \
    --cc=zhukeqian1@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.