All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
	Finn Thain <fthain@telegraphics.com.au>,
	Hannes Reinecke <hare@suse.com>,
	Ondrej Zary <linux@rainbow-software.org>,
	Michael Schmitz <schmitzmic@gmail.com>,
	Finn Thain <fthain@linux-m68k.org>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH 05/44] NCR5380: Move the SCSI pointer to private command data
Date: Fri, 28 Jan 2022 14:18:30 -0800	[thread overview]
Message-ID: <20220128221909.8141-6-bvanassche@acm.org> (raw)
In-Reply-To: <20220128221909.8141-1-bvanassche@acm.org>

Move the SCSI pointer into the NCR5380 private command data instead of
using the SCSI pointer from struct scsi_cmnd. This patch prepares for
removal of the SCSI pointer from struct scsi_cmnd.

Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/NCR5380.c    | 83 +++++++++++++++++++++++----------------
 drivers/scsi/NCR5380.h    |  8 ++++
 drivers/scsi/atari_scsi.c |  6 ++-
 drivers/scsi/g_NCR5380.c  |  5 ++-
 drivers/scsi/mac_scsi.c   |  6 ++-
 drivers/scsi/sun3_scsi.c  |  3 +-
 6 files changed, 70 insertions(+), 41 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 55af3e245a92..73c1b2ec6214 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -145,40 +145,44 @@ static void bus_reset_cleanup(struct Scsi_Host *);
 
 static inline void initialize_SCp(struct scsi_cmnd *cmd)
 {
+	struct scsi_pointer *scsi_pointer = NCR5380_scsi_pointer(cmd);
+
 	/*
 	 * Initialize the Scsi Pointer field so that all of the commands in the
 	 * various queues are valid.
 	 */
 
 	if (scsi_bufflen(cmd)) {
-		cmd->SCp.buffer = scsi_sglist(cmd);
-		cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
-		cmd->SCp.this_residual = cmd->SCp.buffer->length;
+		scsi_pointer->buffer = scsi_sglist(cmd);
+		scsi_pointer->ptr = sg_virt(scsi_pointer->buffer);
+		scsi_pointer->this_residual = scsi_pointer->buffer->length;
 	} else {
-		cmd->SCp.buffer = NULL;
-		cmd->SCp.ptr = NULL;
-		cmd->SCp.this_residual = 0;
+		scsi_pointer->buffer = NULL;
+		scsi_pointer->ptr = NULL;
+		scsi_pointer->this_residual = 0;
 	}
 
-	cmd->SCp.Status = 0;
-	cmd->SCp.Message = 0;
+	scsi_pointer->Status = 0;
+	scsi_pointer->Message = 0;
 }
 
 static inline void advance_sg_buffer(struct scsi_cmnd *cmd)
 {
-	struct scatterlist *s = cmd->SCp.buffer;
+	struct scsi_pointer *scsi_pointer = NCR5380_scsi_pointer(cmd);
+	struct scatterlist *s = scsi_pointer->buffer;
 
-	if (!cmd->SCp.this_residual && s && !sg_is_last(s)) {
-		cmd->SCp.buffer = sg_next(s);
-		cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
-		cmd->SCp.this_residual = cmd->SCp.buffer->length;
+	if (!scsi_pointer->this_residual && s && !sg_is_last(s)) {
+		scsi_pointer->buffer = sg_next(s);
+		scsi_pointer->ptr = sg_virt(scsi_pointer->buffer);
+		scsi_pointer->this_residual = scsi_pointer->buffer->length;
 	}
 }
 
 static inline void set_resid_from_SCp(struct scsi_cmnd *cmd)
 {
-	int resid = cmd->SCp.this_residual;
-	struct scatterlist *s = cmd->SCp.buffer;
+	struct scsi_pointer *scsi_pointer = NCR5380_scsi_pointer(cmd);
+	int resid = scsi_pointer->this_residual;
+	struct scatterlist *s = scsi_pointer->buffer;
 
 	if (s)
 		while (!sg_is_last(s)) {
@@ -757,6 +761,7 @@ static void NCR5380_main(struct work_struct *work)
 static void NCR5380_dma_complete(struct Scsi_Host *instance)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
+	struct scsi_pointer *scsi_pointer;
 	int transferred;
 	unsigned char **data;
 	int *count;
@@ -764,7 +769,10 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
 	unsigned char p;
 
 	if (hostdata->read_overruns) {
-		p = hostdata->connected->SCp.phase;
+		struct scsi_pointer *scsi_pointer =
+			NCR5380_scsi_pointer(hostdata->connected);
+
+		p = scsi_pointer->phase;
 		if (p & SR_IO) {
 			udelay(10);
 			if ((NCR5380_read(BUS_AND_STATUS_REG) &
@@ -801,8 +809,9 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
 	transferred = hostdata->dma_len - NCR5380_dma_residual(hostdata);
 	hostdata->dma_len = 0;
 
-	data = (unsigned char **)&hostdata->connected->SCp.ptr;
-	count = &hostdata->connected->SCp.this_residual;
+	scsi_pointer = NCR5380_scsi_pointer(hostdata->connected);
+	data = (unsigned char **)&scsi_pointer->ptr;
+	count = &scsi_pointer->this_residual;
 	*data += transferred;
 	*count -= transferred;
 
@@ -1487,6 +1496,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 				unsigned char **data)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
+	struct scsi_pointer *scsi_pointer =
+		NCR5380_scsi_pointer(hostdata->connected);
 	int c = *count;
 	unsigned char p = *phase;
 	unsigned char *d = *data;
@@ -1498,7 +1509,7 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 		return -1;
 	}
 
-	hostdata->connected->SCp.phase = p;
+	scsi_pointer->phase = p;
 
 	if (p & SR_IO) {
 		if (hostdata->read_overruns)
@@ -1691,6 +1702,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 
 	while ((cmd = hostdata->connected)) {
 		struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+		struct scsi_pointer *scsi_pointer = &ncmd->scsi_pointer;
 
 		tmp = NCR5380_read(STATUS_REG);
 		/* We only have a valid SCSI phase when REQ is asserted */
@@ -1712,10 +1724,10 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				if (count > 0) {
 					if (cmd->sc_data_direction == DMA_TO_DEVICE)
 						sun3scsi_dma_send_setup(hostdata,
-						                        cmd->SCp.ptr, count);
+						                        scsi_pointer->ptr, count);
 					else
 						sun3scsi_dma_recv_setup(hostdata,
-						                        cmd->SCp.ptr, count);
+						                        scsi_pointer->ptr, count);
 					sun3_dma_setup_done = cmd;
 				}
 #ifdef SUN3_SCSI_VME
@@ -1758,8 +1770,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				advance_sg_buffer(cmd);
 				dsprintk(NDEBUG_INFORMATION, instance,
 					"this residual %d, sg ents %d\n",
-					cmd->SCp.this_residual,
-					sg_nents(cmd->SCp.buffer));
+					scsi_pointer->this_residual,
+					sg_nents(scsi_pointer->buffer));
 
 				/*
 				 * The preferred transfer method is going to be
@@ -1778,7 +1790,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				if (transfersize > 0) {
 					len = transfersize;
 					if (NCR5380_transfer_dma(instance, &phase,
-					    &len, (unsigned char **)&cmd->SCp.ptr)) {
+					    &len, (unsigned char **)&scsi_pointer->ptr)) {
 						/*
 						 * If the watchdog timer fires, all future
 						 * accesses to this device will use the
@@ -1794,13 +1806,13 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					/* Transfer a small chunk so that the
 					 * irq mode lock is not held too long.
 					 */
-					transfersize = min(cmd->SCp.this_residual,
+					transfersize = min(scsi_pointer->this_residual,
 							   NCR5380_PIO_CHUNK_SIZE);
 					len = transfersize;
 					NCR5380_transfer_pio(instance, &phase, &len,
-					                     (unsigned char **)&cmd->SCp.ptr,
+					                     (unsigned char **)&scsi_pointer->ptr,
 							     0);
-					cmd->SCp.this_residual -= transfersize - len;
+					scsi_pointer->this_residual -= transfersize - len;
 				}
 #ifdef CONFIG_SUN3
 				if (sun3_dma_setup_done == cmd)
@@ -1811,7 +1823,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				len = 1;
 				data = &tmp;
 				NCR5380_transfer_pio(instance, &phase, &len, &data, 0);
-				cmd->SCp.Message = tmp;
+				scsi_pointer->Message = tmp;
 
 				switch (tmp) {
 				case ABORT:
@@ -1828,15 +1840,15 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					hostdata->connected = NULL;
 					hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 
-					set_status_byte(cmd, cmd->SCp.Status);
+					set_status_byte(cmd, scsi_pointer->Status);
 
 					set_resid_from_SCp(cmd);
 
 					if (cmd->cmnd[0] == REQUEST_SENSE)
 						complete_cmd(instance, cmd);
 					else {
-						if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION ||
-						    cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) {
+						if (scsi_pointer->Status == SAM_STAT_CHECK_CONDITION ||
+						    scsi_pointer->Status == SAM_STAT_COMMAND_TERMINATED) {
 							dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n",
 							         cmd);
 							list_add_tail(&ncmd->list,
@@ -2000,7 +2012,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				len = 1;
 				data = &tmp;
 				NCR5380_transfer_pio(instance, &phase, &len, &data, 0);
-				cmd->SCp.Status = tmp;
+				scsi_pointer->Status = tmp;
 				break;
 			default:
 				shost_printk(KERN_ERR, instance, "unknown phase\n");
@@ -2151,6 +2163,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 
 #ifdef CONFIG_SUN3
 	if (sun3_dma_setup_done != tmp) {
+		struct scsi_pointer *scsi_pointer = NCR5380_scsi_pointer(tmp);
 		int count;
 
 		advance_sg_buffer(tmp);
@@ -2160,10 +2173,12 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		if (count > 0) {
 			if (tmp->sc_data_direction == DMA_TO_DEVICE)
 				sun3scsi_dma_send_setup(hostdata,
-				                        tmp->SCp.ptr, count);
+				                        scsi_pointer->ptr,
+							count);
 			else
 				sun3scsi_dma_recv_setup(hostdata,
-				                        tmp->SCp.ptr, count);
+				                        scsi_pointer->ptr,
+							count);
 			sun3_dma_setup_done = tmp;
 		}
 	}
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 845bd2423e66..adaf131aea4d 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -227,9 +227,17 @@ struct NCR5380_hostdata {
 };
 
 struct NCR5380_cmd {
+	struct scsi_pointer scsi_pointer;
 	struct list_head list;
 };
 
+static inline struct scsi_pointer *NCR5380_scsi_pointer(struct scsi_cmnd *cmd)
+{
+	struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
+	return &ncmd->scsi_pointer;
+}
+
 #define NCR5380_PIO_CHUNK_SIZE		256
 
 /* Time limit (ms) to poll registers when IRQs are disabled, e.g. during PDMA */
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index e9d0d99abc86..61fd3244a4ce 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -538,7 +538,8 @@ static int falcon_classify_cmd(struct scsi_cmnd *cmd)
 static int atari_scsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
                                    struct scsi_cmnd *cmd)
 {
-	int wanted_len = cmd->SCp.this_residual;
+	struct scsi_pointer *scsi_pointer = NCR5380_scsi_pointer(cmd);
+	int wanted_len = scsi_pointer->this_residual;
 	int possible_len, limit;
 
 	if (wanted_len < DMA_MIN_SIZE)
@@ -610,7 +611,8 @@ static int atari_scsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
 	}
 
 	/* Last step: apply the hard limit on DMA transfers */
-	limit = (atari_dma_buffer && !STRAM_ADDR(virt_to_phys(cmd->SCp.ptr))) ?
+	limit = (atari_dma_buffer &&
+		 !STRAM_ADDR(virt_to_phys(scsi_pointer->ptr))) ?
 		    STRAM_BUFFER_SIZE : 255*512;
 	if (possible_len > limit)
 		possible_len = limit;
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 5923f86a384e..fb39a656fd15 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -663,7 +663,8 @@ static inline int generic_NCR5380_psend(struct NCR5380_hostdata *hostdata,
 static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata,
                                         struct scsi_cmnd *cmd)
 {
-	int transfersize = cmd->SCp.this_residual;
+	struct scsi_pointer *scsi_pointer = NCR5380_scsi_pointer(cmd);
+	int transfersize = scsi_pointer->this_residual;
 
 	if (hostdata->flags & FLAG_NO_PSEUDO_DMA)
 		return 0;
@@ -675,7 +676,7 @@ static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata,
 	/* Limit PDMA send to 512 B to avoid random corruption on DTC3181E */
 	if (hostdata->board == BOARD_DTC3181E &&
 	    cmd->sc_data_direction == DMA_TO_DEVICE)
-		transfersize = min(cmd->SCp.this_residual, 512);
+		transfersize = min(scsi_pointer->this_residual, 512);
 
 	return min(transfersize, DMA_MAX_SIZE);
 }
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index 71d493a0bb43..f31da6106b72 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -404,11 +404,13 @@ static inline int macscsi_pwrite(struct NCR5380_hostdata *hostdata,
 static int macscsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
                                 struct scsi_cmnd *cmd)
 {
+	struct scsi_pointer *scsi_pointer = NCR5380_scsi_pointer(cmd);
+
 	if (hostdata->flags & FLAG_NO_PSEUDO_DMA ||
-	    cmd->SCp.this_residual < setup_use_pdma)
+	    scsi_pointer->this_residual < setup_use_pdma)
 		return 0;
 
-	return cmd->SCp.this_residual;
+	return scsi_pointer->this_residual;
 }
 
 static int macscsi_dma_residual(struct NCR5380_hostdata *hostdata)
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index 82a253270c3b..50cbffbf2dd1 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -334,7 +334,8 @@ static int sun3scsi_dma_residual(struct NCR5380_hostdata *hostdata)
 static int sun3scsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
                                  struct scsi_cmnd *cmd)
 {
-	int wanted_len = cmd->SCp.this_residual;
+	struct scsi_pointer *scsi_pointer = NCR5380_scsi_pointer(cmd);
+	int wanted_len = scsi_pointer->this_residual;
 
 	if (wanted_len < DMA_MIN_SIZE || blk_rq_is_passthrough(scsi_cmd_to_rq(cmd)))
 		return 0;

  parent reply	other threads:[~2022-01-28 22:20 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-28 22:18 [PATCH 00/44] Remove the SCSI pointer from struct scsi_cmnd Bart Van Assche
2022-01-28 22:18 ` [PATCH 01/44] ips: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-01-31  9:53   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 02/44] nsp_cs: " Bart Van Assche
2022-01-31  9:55   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 03/44] scsi: Remove drivers/scsi/scsi.h Bart Van Assche
2022-01-31 12:53   ` Greg Kroah-Hartman
2022-01-28 22:18 ` [PATCH 04/44] NCR5380: Remove the NCR5380_CMD_SIZE macro Bart Van Assche
2022-01-31  9:58   ` Johannes Thumshirn
2022-01-28 22:18 ` Bart Van Assche [this message]
2022-01-31 10:04   ` [PATCH 05/44] NCR5380: Move the SCSI pointer to private command data Johannes Thumshirn
2022-01-31 22:39   ` Finn Thain
2022-01-31 23:36     ` Bart Van Assche
2022-02-01  0:11       ` Finn Thain
2022-01-28 22:18 ` [PATCH 06/44] scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h Bart Van Assche
2022-01-31 10:09   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 07/44] scsi: arm: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:18 ` [PATCH 08/44] 53c700: Stop clearing SCSI pointer fields Bart Van Assche
2022-01-31 10:15   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 09/44] aacraid: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:18 ` [PATCH 10/44] advansys: " Bart Van Assche
2022-01-31 10:23   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 11/44] aha1542: Remove a set-but-not-used array Bart Van Assche
2022-01-31 10:25   ` Johannes Thumshirn
2022-01-31 17:13     ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 12/44] aha152x: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 10:32   ` Johannes Thumshirn
2022-01-31 17:16     ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 13/44] bfa: Stop using the SCSI pointer Bart Van Assche
2022-01-31 10:39   ` Johannes Thumshirn
2022-01-31 17:19     ` Bart Van Assche
2022-02-01  9:16       ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 14/44] csio: " Bart Van Assche
2022-01-31 10:41   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 15/44] dc395x: " Bart Van Assche
2022-01-31 10:42   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 16/44] esp_scsi: " Bart Van Assche
2022-01-31 10:43   ` Johannes Thumshirn
2022-01-31 22:46   ` Finn Thain
2022-02-01 21:20     ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 17/44] fdomain: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 10:44   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 18/44] fnic: Fix a tracing statement Bart Van Assche
2022-01-28 22:18 ` [PATCH 19/44] fnic: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:01   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 20/44] hptiop: " Bart Van Assche
2022-01-31 11:03   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 21/44] imm: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:17   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 22/44] iscsi: Stop using the SCSI pointer Bart Van Assche
2022-01-28 22:18 ` [PATCH 23/44] initio: " Bart Van Assche
2022-01-31 11:19   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 24/44] libfc: " Bart Van Assche
2022-01-28 22:18 ` [PATCH 25/44] mac53c94: Fix a set-but-not-used compiler warning Bart Van Assche
2022-01-31 11:21   ` Johannes Thumshirn
2022-01-31 17:22     ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 26/44] mac53c94: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:22   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 27/44] megaraid: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:27   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 28/44] megasas: " Bart Van Assche
2022-01-31 11:28   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 29/44] mesh: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:31   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 30/44] mvsas: Fix a set-but-not-used warning Bart Van Assche
2022-01-31 11:33   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 31/44] mvumi: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:34   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 32/44] nsp32: " Bart Van Assche
2022-01-31  2:53   ` Masanori Goto
2022-01-31 17:28     ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 33/44] nsp_cs: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:18 ` [PATCH 34/44] sym53c500_cs: " Bart Van Assche
2022-01-31 11:37   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 35/44] ppa: " Bart Van Assche
2022-01-31 11:38   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 36/44] qla1280: " Bart Van Assche
2022-01-31 11:39   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 37/44] qla2xxx: Stop using the SCSI pointer Bart Van Assche
2022-01-28 22:19 ` [PATCH 38/44] smartpqi: " Bart Van Assche
2022-01-31 11:41   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 39/44] sym53c8xx_2: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:42   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 40/44] scsi: usb: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:43   ` Johannes Thumshirn
2022-01-31 12:53   ` Greg Kroah-Hartman
2022-02-02  8:14   ` Oliver Neukum
2022-01-28 22:19 ` [PATCH 41/44] wd719x: " Bart Van Assche
2022-01-31 11:44   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 42/44] wdc33c93: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:19 ` [PATCH 43/44] zalon: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:46   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 44/44] scsi: core: Remove struct scsi_pointer from struct scsi_cmnd Bart Van Assche
2022-01-31 11:47   ` Johannes Thumshirn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220128221909.8141-6-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=fthain@linux-m68k.org \
    --cc=fthain@telegraphics.com.au \
    --cc=hare@suse.com \
    --cc=jejb@linux.ibm.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linux@rainbow-software.org \
    --cc=martin.petersen@oracle.com \
    --cc=schmitzmic@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.