From: Marcel Ziswiler <marcel@ziswiler.com>
To: u-boot@lists.denx.de
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Bharat Gooty <bharat.gooty@broadcom.com>,
Denys Drozdov <denys.drozdov@toradex.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>,
Rick Chen <rick@andestech.com>, Sean Anderson <seanga2@gmail.com>,
Simon Glass <sjg@chromium.org>, Stefan Roese <sr@denx.de>
Subject: [PATCH v2 08/11] board: toradex: drop colibri pxa270 support
Date: Wed, 13 Apr 2022 11:33:32 +0200 [thread overview]
Message-ID: <20220413093335.1372656-9-marcel@ziswiler.com> (raw)
In-Reply-To: <20220413093335.1372656-1-marcel@ziswiler.com>
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
The Colibri PXA270 has been end-of-life since quite a while and would
require more and more maintenance (e.g. DM conversions).
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
(no changes since v1)
arch/arm/Kconfig | 6 -
board/toradex/colibri_pxa270/Kconfig | 23 ---
board/toradex/colibri_pxa270/MAINTAINERS | 6 -
board/toradex/colibri_pxa270/Makefile | 7 -
board/toradex/colibri_pxa270/colibri_pxa270.c | 153 ------------------
board/toradex/common/tdx-cfg-block.c | 19 +--
configs/colibri_pxa270_defconfig | 57 -------
include/configs/colibri_pxa270.h | 151 -----------------
include/configs/pxa-common.h | 27 ----
9 files changed, 1 insertion(+), 448 deletions(-)
delete mode 100644 board/toradex/colibri_pxa270/Kconfig
delete mode 100644 board/toradex/colibri_pxa270/MAINTAINERS
delete mode 100644 board/toradex/colibri_pxa270/Makefile
delete mode 100644 board/toradex/colibri_pxa270/colibri_pxa270.c
delete mode 100644 configs/colibri_pxa270_defconfig
delete mode 100644 include/configs/colibri_pxa270.h
delete mode 100644 include/configs/pxa-common.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index efe33a58e1e..ed34fa59bd7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1833,11 +1833,6 @@ config TARGET_TEN64
Support for Traverse Technologies Ten64 board, based
on NXP LS1088A.
-config TARGET_COLIBRI_PXA270
- bool "Support colibri_pxa270"
- select CPU_PXA27X
- select GPIO_EXTRA_HEADER
-
config ARCH_UNIPHIER
bool "Socionext UniPhier SoCs"
select BOARD_LATE_INIT
@@ -2301,7 +2296,6 @@ source "board/seeed/npi_imx6ull/Kconfig"
source "board/socionext/developerbox/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/tcl/sl50/Kconfig"
-source "board/toradex/colibri_pxa270/Kconfig"
source "board/traverse/ten64/Kconfig"
source "board/variscite/dart_6ul/Kconfig"
source "board/vscom/baltos/Kconfig"
diff --git a/board/toradex/colibri_pxa270/Kconfig b/board/toradex/colibri_pxa270/Kconfig
deleted file mode 100644
index f646baa3f05..00000000000
--- a/board/toradex/colibri_pxa270/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-if TARGET_COLIBRI_PXA270
-
-config SYS_BOARD
- default "colibri_pxa270"
-
-config SYS_VENDOR
- default "toradex"
-
-config SYS_CONFIG_NAME
- default "colibri_pxa270"
-
-config TDX_CFG_BLOCK
- default y
-
-config TDX_HAVE_NOR
- default y
-
-config TDX_CFG_BLOCK_OFFSET
- default "262144"
-
-source "board/toradex/common/Kconfig"
-
-endif
diff --git a/board/toradex/colibri_pxa270/MAINTAINERS b/board/toradex/colibri_pxa270/MAINTAINERS
deleted file mode 100644
index b378d7be5a4..00000000000
--- a/board/toradex/colibri_pxa270/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-COLIBRI_PXA270 BOARD
-M: Marek Vasut <marek.vasut@gmail.com>
-S: Maintained
-F: board/toradex/colibri_pxa270/
-F: include/configs/colibri_pxa270.h
-F: configs/colibri_pxa270_defconfig
diff --git a/board/toradex/colibri_pxa270/Makefile b/board/toradex/colibri_pxa270/Makefile
deleted file mode 100644
index ea610cfea92..00000000000
--- a/board/toradex/colibri_pxa270/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Toradex Colibri PXA270 Support
-#
-# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
-
-obj-y := colibri_pxa270.o
diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c b/board/toradex/colibri_pxa270/colibri_pxa270.c
deleted file mode 100644
index 25fbf412095..00000000000
--- a/board/toradex/colibri_pxa270/colibri_pxa270.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Toradex Colibri PXA270 Support
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- * Copyright (C) 2016-2019 Marcel Ziswiler <marcel.ziswiler@toradex.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <dm.h>
-#include <init.h>
-#include <net.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/regs-mmc.h>
-#include <asm/arch/regs-uart.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <dm/platdata.h>
-#include <dm/platform_data/pxa_mmc_gen.h>
-#include <dm/platform_data/serial_pxa.h>
-#include <netdev.h>
-#include <serial.h>
-#include <usb.h>
-#include <asm/mach-types.h>
-#include <linux/delay.h>
-#include "../common/tdx-common.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- /* We have RAM, disable cache */
- dcache_disable();
- icache_disable();
-
- /* arch number of Toradex Colibri PXA270 */
- gd->bd->bi_arch_number = MACH_TYPE_COLIBRI;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = 0xa0000100;
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Model: Toradex Colibri PXA270\n");
-
- return 0;
-}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- return ft_common_board_setup(blob, bd);
-}
-#endif
-
-int dram_init(void)
-{
- pxa2xx_dram_init();
- gd->ram_size = PHYS_SDRAM_1_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_CMD_USB
-int board_usb_init(int index, enum usb_init_type init)
-{
- writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
- UHCHR);
-
- writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
-
- while (UHCHR & UHCHR_FSBIR)
- ;
-
- writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
- writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
-
- /* Clear any OTG Pin Hold */
- if (readl(PSSR) & PSSR_OTGPH)
- writel(readl(PSSR) | PSSR_OTGPH, PSSR);
-
- writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
- writel(readl(UHCRHDA) | 0x100, UHCRHDA);
-
- /* Set port power control mask bits, only 3 ports. */
- writel(readl(UHCRHDB) | (0x7 << 17), UHCRHDB);
-
- /* enable port 2 */
- writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
- UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
-
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
- return 0;
-}
-
-void usb_board_stop(void)
-{
- writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
- udelay(11);
- writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
-
- writel(readl(UHCCOMS) | 1, UHCCOMS);
- udelay(10);
-
- writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
-}
-#endif
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(struct bd_info *bis)
-{
- return dm9000_initialize(bis);
-}
-#endif
-
-#ifdef CONFIG_CMD_MMC
-#if !CONFIG_IS_ENABLED(DM_MMC)
-int board_mmc_init(struct bd_info *bis)
-{
- pxa_mmc_register(0);
- return 0;
-}
-#else /* !CONFIG_IS_ENABLED(DM_MMC) */
-static const struct pxa_mmc_plat mmc_plat = {
- .base = (struct pxa_mmc_regs *)MMC0_BASE,
-};
-
-U_BOOT_DRVINFO(pxa_mmcs) = {
- .name = "pxa_mmc",
- .plat = &mmc_plat,
-};
-#endif /* !CONFIG_IS_ENABLED(DM_MMC) */
-#endif
-
-static const struct pxa_serial_plat serial_plat = {
- .base = (struct pxa_uart_regs *)FFUART_BASE,
- .port = FFUART_INDEX,
- .baudrate = CONFIG_BAUDRATE,
-};
-
-U_BOOT_DRVINFO(pxa_serials) = {
- .name = "serial_pxa",
- .plat = &serial_plat,
-};
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index 0e657a2a0a9..9c87289ae93 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -22,11 +22,6 @@
#else
#define is_cpu_type(cpu) (0)
#endif
-#if defined(CONFIG_CPU_PXA27X)
-#include <asm/arch-pxa/pxa.h>
-#else
-#define cpu_is_pxa27x(cpu) (0)
-#endif
#include <cli.h>
#include <console.h>
#include <env.h>
@@ -369,10 +364,7 @@ static int get_cfgblock_interactive(void)
/* Unknown module by default */
tdx_hw_tag.prodid = 0;
- if (cpu_is_pxa27x())
- sprintf(message, "Is the module the 312 MHz version? [y/N] ");
- else
- sprintf(message, "Is the module an IT version? [y/N] ");
+ sprintf(message, "Is the module an IT version? [y/N] ");
len = cli_readline(message);
it = console_buffer[0];
@@ -500,11 +492,6 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.prodid = COLIBRI_T20_256MB;
else
tdx_hw_tag.prodid = COLIBRI_T20_512MB;
- } else if (cpu_is_pxa27x()) {
- if (it == 'y' || it == 'Y')
- tdx_hw_tag.prodid = COLIBRI_PXA270_312MHZ;
- else
- tdx_hw_tag.prodid = COLIBRI_PXA270_520MHZ;
}
#if defined(CONFIG_TARGET_APALIS_T30) || defined(CONFIG_TARGET_COLIBRI_T30)
else if (!strcmp("tegra30", soc)) {
@@ -552,10 +539,6 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.ver_minor = console_buffer[2] - '0';
tdx_hw_tag.ver_assembly = console_buffer[3] - 'A';
- if (cpu_is_pxa27x() && tdx_hw_tag.ver_major == 1)
- tdx_hw_tag.prodid -= (COLIBRI_PXA270_312MHZ -
- COLIBRI_PXA270_V1_312MHZ);
-
while (len < 8) {
sprintf(message, "Enter module serial number: ");
len = cli_readline(message);
diff --git a/configs/colibri_pxa270_defconfig b/configs/colibri_pxa270_defconfig
deleted file mode 100644
index 9ce65861046..00000000000
--- a/configs/colibri_pxa270_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_COLIBRI_PXA270=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_SYS_MALLOC_LEN=0x20000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_SYS_LOAD_ADDR=0xa0000000
-CONFIG_ENV_ADDR=0x80000
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_HAS_BOARD_SIZE_LIMIT=y
-CONFIG_BOARD_SIZE_LIMIT=262144
-CONFIG_TIMESTAMP=y
-CONFIG_SYS_MONITOR_BASE=0x00000000
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200"
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="if fatload mmc 0 0xa0000000 uImage; then bootm 0xa0000000; fi; if usb reset && fatload usb 0 0xa0000000 uImage; then bootm 0xa0000000; fi; bootm 0xc0000;"
-CONFIG_SYS_DEVICE_NULLDEV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_DISPLAY_BOARDINFO_LATE=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-# CONFIG_SYS_LONGHELP is not set
-CONFIG_SYS_PROMPT="$ "
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-CONFIG_CMD_DM=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_BOOTP_BOOTFILESIZE=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_NET_RETRY_COUNT=10
-CONFIG_DM=y
-CONFIG_PXA_MMC_GENERIC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SERIAL=y
-CONFIG_PXA_SERIAL=y
-CONFIG_USB=y
-# CONFIG_REGEX is not set
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
deleted file mode 100644
index a5ba916279a..00000000000
--- a/include/configs/colibri_pxa270.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Toradex Colibri PXA270 configuration file
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- * Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-
-/*
- * Environment settings
- */
-
-/*
- * Serial Console Configuration
- */
-
-/*
- * Bootloader Components Configuration
- */
-
-/* I2C support */
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
-#define CONFIG_SYS_I2C_PXA
-#define CONFIG_PXA_STD_I2C
-#define CONFIG_PXA_PWR_I2C
-#endif
-
-/* LCD support */
-#ifdef CONFIG_LCD
-#define CONFIG_PXA_LCD
-#define CONFIG_PXA_VGA
-#endif
-
-/*
- * Networking Configuration
- */
-#ifdef CONFIG_CMD_NET
-
-#define CONFIG_DRIVER_DM9000 1
-#define CONFIG_DM9000_BASE 0x08000000
-#define DM9000_IO (CONFIG_DM9000_BASE)
-#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
-#endif
-
-/*
- * Clock Configuration
- */
-#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
-
-/*
- * DRAM Map
- */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
-#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
-
-/*
- * NOR FLASH
- */
-#ifdef CONFIG_CMD_FLASH
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-
-#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT (25 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (25 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_LOCK_TOUT (25 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (25 * CONFIG_SYS_HZ)
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN 0x40000
-
-/* Skip factory configuration block */
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPSR0_VAL 0x00000000
-#define CONFIG_SYS_GPSR1_VAL 0x00020000
-#define CONFIG_SYS_GPSR2_VAL 0x0002c000
-#define CONFIG_SYS_GPSR3_VAL 0x00000000
-
-#define CONFIG_SYS_GPCR0_VAL 0x00000000
-#define CONFIG_SYS_GPCR1_VAL 0x00000000
-#define CONFIG_SYS_GPCR2_VAL 0x00000000
-#define CONFIG_SYS_GPCR3_VAL 0x00000000
-
-#define CONFIG_SYS_GPDR0_VAL 0xc8008000
-#define CONFIG_SYS_GPDR1_VAL 0xfc02a981
-#define CONFIG_SYS_GPDR2_VAL 0x92c3ffff
-#define CONFIG_SYS_GPDR3_VAL 0x0061e804
-
-#define CONFIG_SYS_GAFR0_L_VAL 0x80100000
-#define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010
-#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
-#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008
-#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
-#define CONFIG_SYS_GAFR2_U_VAL 0x4109a002
-#define CONFIG_SYS_GAFR3_L_VAL 0x54000310
-#define CONFIG_SYS_GAFR3_U_VAL 0x00005401
-
-#define CONFIG_SYS_PSSR_VAL 0x30
-
-/*
- * Clock settings
- */
-#define CONFIG_SYS_CKEN 0x00500240
-#define CONFIG_SYS_CCCR 0x02000290
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2
-#define CONFIG_SYS_MSC1_VAL 0x9ee1f994
-#define CONFIG_SYS_MSC2_VAL 0x9ee19ee1
-#define CONFIG_SYS_MDCNFG_VAL 0x090009c9
-#define CONFIG_SYS_MDREFR_VAL 0x2003a031
-#define CONFIG_SYS_MDMRS_VAL 0x00220022
-#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
-#define CONFIG_SYS_SXCNFG_VAL 0x40044004
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00028307
-#define CONFIG_SYS_MCMEM1_VAL 0x00014307
-#define CONFIG_SYS_MCATT0_VAL 0x00038787
-#define CONFIG_SYS_MCATT1_VAL 0x0001c787
-#define CONFIG_SYS_MCIO0_VAL 0x0002830f
-#define CONFIG_SYS_MCIO1_VAL 0x0001430f
-
-#include "pxa-common.h"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h
deleted file mode 100644
index 7a78f98eb15..00000000000
--- a/include/configs/pxa-common.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Toradex Colibri PXA270 configuration file
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef __CONFIG_PXA_COMMON_H__
-#define __CONFIG_PXA_COMMON_H__
-
-/*
- * OHCI USB
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_BOARD_INIT
-#ifdef CONFIG_CPU_PXA27X
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
-#else
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#endif
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4c000000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "pxa-ohci"
-#endif
-
-#endif /* __CONFIG_PXA_COMMON_H__ */
--
2.34.1
next prev parent reply other threads:[~2022-04-13 9:35 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-13 9:33 [PATCH v2 00/11] toradex updates: assortment of fixes and improvements Marcel Ziswiler
2022-04-13 9:33 ` [PATCH v2 01/11] toradex: apalis-imx8x: drop support for apalis imx8x Marcel Ziswiler
2022-04-21 12:25 ` sbabic
2022-04-13 9:33 ` [PATCH v2 02/11] toradex: globally disable video support Marcel Ziswiler
2022-04-21 12:26 ` sbabic
2022-04-13 9:33 ` [PATCH v2 03/11] toradex: set default dhcp distroboot scriptname Marcel Ziswiler
2022-04-21 12:26 ` sbabic
2022-04-13 9:33 ` [PATCH v2 04/11] toradex: drop legacy nfsboot script Marcel Ziswiler
2022-04-21 12:26 ` sbabic
2022-04-13 9:33 ` [PATCH v2 05/11] configs: toradex: enable missing fit options Marcel Ziswiler
2022-04-21 12:26 ` sbabic
2022-04-13 9:33 ` [PATCH v2 06/11] configs: colibri-imx7/-emmc: enable booting from usb sdp Marcel Ziswiler
2022-04-21 12:26 ` sbabic
2022-04-13 9:33 ` [PATCH v2 07/11] configs: tdx: Do not overwrite fdtfile if it got set manually Marcel Ziswiler
2022-04-21 12:27 ` sbabic
2022-04-13 9:33 ` Marcel Ziswiler [this message]
2022-04-21 12:27 ` [PATCH v2 08/11] board: toradex: drop colibri pxa270 support sbabic
2022-04-13 9:33 ` [PATCH v2 09/11] board: colibri_imx7: fix usb start on solo Marcel Ziswiler
2022-04-21 12:26 ` sbabic
2022-04-13 9:33 ` [PATCH v2 10/11] configs: tdx: apalis_imx6: drop hw v1.0 support Marcel Ziswiler
2022-04-21 12:25 ` sbabic
2022-04-13 9:33 ` [PATCH v2 11/11] configs: tdx: apalis/colibri_imx6: use preboot as well Marcel Ziswiler
2022-04-21 12:27 ` sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220413093335.1372656-9-marcel@ziswiler.com \
--to=marcel@ziswiler.com \
--cc=bharat.gooty@broadcom.com \
--cc=denys.drozdov@toradex.com \
--cc=marcel.ziswiler@toradex.com \
--cc=patrick.delaunay@foss.st.com \
--cc=rayagonda.kokatanur@broadcom.com \
--cc=rick@andestech.com \
--cc=seanga2@gmail.com \
--cc=sjg@chromium.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.