All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Wunderlich <linux@fw-web.de>
To: linux-rockchip@lists.infradead.org
Cc: "Frank Wunderlich" <frank-w@public-files.de>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Johan Jonker" <jbx6244@gmail.com>,
	"Peter Geis" <pgwipeout@gmail.com>,
	"Michael Riesch" <michael.riesch@wolfvision.net>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [RFC/RFT v2 08/11] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
Date: Tue, 26 Apr 2022 15:21:36 +0200	[thread overview]
Message-ID: <20220426132139.26761-9-linux@fw-web.de> (raw)
In-Reply-To: <20220426132139.26761-1-linux@fw-web.de>

From: Frank Wunderlich <frank-w@public-files.de>

Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes in v2:
- underscores in nodenames
- rockchip,bifurcation to vendor unspecific bifurcation
- fix trailing space
---
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 2700fb18a3bc..86506d7896c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -74,6 +74,67 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&dc_12v>;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
 	vbus: vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
@@ -411,6 +472,24 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x1 {
+	bifurcation;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	bifurcation;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		blue_led_pin: blue-led-pin {
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-rockchip@lists.infradead.org
Cc: "Frank Wunderlich" <frank-w@public-files.de>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Johan Jonker" <jbx6244@gmail.com>,
	"Peter Geis" <pgwipeout@gmail.com>,
	"Michael Riesch" <michael.riesch@wolfvision.net>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [RFC/RFT v2 08/11] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
Date: Tue, 26 Apr 2022 15:21:36 +0200	[thread overview]
Message-ID: <20220426132139.26761-9-linux@fw-web.de> (raw)
In-Reply-To: <20220426132139.26761-1-linux@fw-web.de>

From: Frank Wunderlich <frank-w@public-files.de>

Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes in v2:
- underscores in nodenames
- rockchip,bifurcation to vendor unspecific bifurcation
- fix trailing space
---
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 2700fb18a3bc..86506d7896c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -74,6 +74,67 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&dc_12v>;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
 	vbus: vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
@@ -411,6 +472,24 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x1 {
+	bifurcation;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	bifurcation;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		blue_led_pin: blue-led-pin {
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-rockchip@lists.infradead.org
Cc: "Frank Wunderlich" <frank-w@public-files.de>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Johan Jonker" <jbx6244@gmail.com>,
	"Peter Geis" <pgwipeout@gmail.com>,
	"Michael Riesch" <michael.riesch@wolfvision.net>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [RFC/RFT v2 08/11] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
Date: Tue, 26 Apr 2022 15:21:36 +0200	[thread overview]
Message-ID: <20220426132139.26761-9-linux@fw-web.de> (raw)
In-Reply-To: <20220426132139.26761-1-linux@fw-web.de>

From: Frank Wunderlich <frank-w@public-files.de>

Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes in v2:
- underscores in nodenames
- rockchip,bifurcation to vendor unspecific bifurcation
- fix trailing space
---
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 2700fb18a3bc..86506d7896c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -74,6 +74,67 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&dc_12v>;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
 	vbus: vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
@@ -411,6 +472,24 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x1 {
+	bifurcation;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	bifurcation;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		blue_led_pin: blue-led-pin {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-rockchip@lists.infradead.org
Cc: "Frank Wunderlich" <frank-w@public-files.de>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Johan Jonker" <jbx6244@gmail.com>,
	"Peter Geis" <pgwipeout@gmail.com>,
	"Michael Riesch" <michael.riesch@wolfvision.net>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [RFC/RFT v2 08/11] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
Date: Tue, 26 Apr 2022 15:21:36 +0200	[thread overview]
Message-ID: <20220426132139.26761-9-linux@fw-web.de> (raw)
In-Reply-To: <20220426132139.26761-1-linux@fw-web.de>

From: Frank Wunderlich <frank-w@public-files.de>

Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes in v2:
- underscores in nodenames
- rockchip,bifurcation to vendor unspecific bifurcation
- fix trailing space
---
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 2700fb18a3bc..86506d7896c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -74,6 +74,67 @@ vcc5v0_sys: vcc5v0-sys {
 		vin-supply = <&dc_12v>;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
 	vbus: vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
@@ -411,6 +472,24 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x1 {
+	bifurcation;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	bifurcation;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		blue_led_pin: blue-led-pin {
-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2022-04-26 13:22 UTC|newest]

Thread overview: 100+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-26 13:21 [RFC/RFT v2 00/11] RK3568 PCIe V3 support Frank Wunderlich
2022-04-26 13:21 ` Frank Wunderlich
2022-04-26 13:21 ` Frank Wunderlich
2022-04-26 13:21 ` Frank Wunderlich
2022-04-26 13:21 ` [RFC/RFT v2 01/11] dt-bindings: phy: rockchip: add PCIe v3 phy Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-28  6:33   ` Krzysztof Kozlowski
2022-04-28  6:33     ` Krzysztof Kozlowski
2022-04-28  6:33     ` Krzysztof Kozlowski
2022-04-28  6:33     ` Krzysztof Kozlowski
2022-04-26 13:21 ` [RFC/RFT v2 02/11] dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-28  6:33   ` Krzysztof Kozlowski
2022-04-28  6:33     ` Krzysztof Kozlowski
2022-04-28  6:33     ` Krzysztof Kozlowski
2022-04-28  6:33     ` Krzysztof Kozlowski
2022-04-26 13:21 ` [RFC/RFT v2 03/11] dt-bindings: phy: rockchip: add PCIe v3 constants Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-28  6:34   ` Krzysztof Kozlowski
2022-04-28  6:34     ` Krzysztof Kozlowski
2022-04-28  6:34     ` Krzysztof Kozlowski
2022-04-28  6:34     ` Krzysztof Kozlowski
2022-04-28  9:27     ` Aw: " Frank Wunderlich
2022-04-28  9:27       ` Frank Wunderlich
2022-04-28  9:27       ` Frank Wunderlich
2022-04-28  9:27       ` Frank Wunderlich
2022-04-28  9:28       ` Krzysztof Kozlowski
2022-04-28  9:28         ` Krzysztof Kozlowski
2022-04-28  9:28         ` Krzysztof Kozlowski
2022-04-28  9:28         ` Krzysztof Kozlowski
2022-04-26 13:21 ` [RFC/RFT v2 04/11] phy: rockchip: Support PCIe v3 Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-28  7:38   ` Philipp Zabel
2022-04-28  7:38     ` Philipp Zabel
2022-04-28  7:38     ` Philipp Zabel
2022-04-28  7:38     ` Philipp Zabel
2022-04-26 13:21 ` [RFC/RFT v2 05/11] dt-bindings: pci: add bifurcation option to Rockchip DesignWare binding Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-28  6:37   ` Krzysztof Kozlowski
2022-04-28  6:37     ` Krzysztof Kozlowski
2022-04-28  6:37     ` Krzysztof Kozlowski
2022-04-28  6:37     ` Krzysztof Kozlowski
2022-04-28  7:25     ` Aw: " Frank Wunderlich
2022-04-28  7:25       ` Frank Wunderlich
2022-04-28  7:25       ` Frank Wunderlich
2022-04-28  7:25       ` Frank Wunderlich
2022-04-28  7:28       ` Krzysztof Kozlowski
2022-04-28  7:28         ` Krzysztof Kozlowski
2022-04-28  7:28         ` Krzysztof Kozlowski
2022-04-28  7:28         ` Krzysztof Kozlowski
2022-04-26 13:21 ` [RFC/RFT v2 06/11] PCI: rockchip-dwc: add PCIe bifurcation Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21 ` [RFC/RFT v2 07/11] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21 ` Frank Wunderlich [this message]
2022-04-26 13:21   ` [RFC/RFT v2 08/11] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21 ` [RFC/RFT v2 09/11] dt-bindings: pci: add lane-map to rockchip PCIe binding Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 16:04   ` Bjorn Helgaas
2022-04-26 16:04     ` Bjorn Helgaas
2022-04-26 16:04     ` Bjorn Helgaas
2022-04-26 16:04     ` Bjorn Helgaas
2022-04-26 17:27     ` Aw: " Frank Wunderlich
2022-04-26 17:27       ` Frank Wunderlich
2022-04-26 17:27       ` Frank Wunderlich
2022-04-26 17:27       ` Frank Wunderlich
2022-04-26 13:21 ` [RFC/RFT v2 10/11] PCI: rockchip: add a lane-map to rockchip pcie driver Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 16:07   ` Bjorn Helgaas
2022-04-26 16:07     ` Bjorn Helgaas
2022-04-26 16:07     ` Bjorn Helgaas
2022-04-26 16:07     ` Bjorn Helgaas
2022-04-26 13:21 ` [RFC/RFT v2 11/11] arm64: dts: rockchip: add basic lane-map and drop bifurcation from r2pro Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 13:21   ` Frank Wunderlich
2022-04-26 16:01 ` [RFC/RFT v2 00/11] RK3568 PCIe V3 support Bjorn Helgaas
2022-04-26 16:01   ` Bjorn Helgaas
2022-04-26 16:01   ` Bjorn Helgaas
2022-04-26 16:01   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220426132139.26761-9-linux@fw-web.de \
    --to=linux@fw-web.de \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=frank-w@public-files.de \
    --cc=heiko@sntech.de \
    --cc=jbx6244@gmail.com \
    --cc=kishon@ti.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=michael.riesch@wolfvision.net \
    --cc=p.zabel@pengutronix.de \
    --cc=pgwipeout@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.