[RFC v2 35/39] usb: handle HAS_IOPORT dependencies

[Niklas Schnelle <schnelle@linux.ibm.com>]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to guard sections of code calling them
as alternative access methods with CONFIG_HAS_IOPORT checks. Similarly
drivers requiring these functions need to depend on HAS_IOPORT.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/usb/core/hcd-pci.c    |   2 +
 drivers/usb/host/Kconfig      |   4 +-
 drivers/usb/host/pci-quirks.c | 128 ++++++++++++++++++----------------
 drivers/usb/host/pci-quirks.h |  31 +++++---
 drivers/usb/host/uhci-hcd.c   |   2 +-
 drivers/usb/host/uhci-hcd.h   |  33 +++++----
 6 files changed, 117 insertions(+), 83 deletions(-)

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 8176bc81a635..4d119154acd0 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -212,8 +212,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id,
 		goto free_irq_vectors;
 	}
 
+#ifdef CONFIG_USB_PCI_AMD
 	hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
 			driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+#endif
 
 	if (driver->flags & HCD_MEMORY) {
 		/* EHCI, OHCI */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 57ca5f97a3dc..cd1faa3174e3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -369,7 +369,7 @@ config USB_ISP116X_HCD
 
 config USB_ISP1362_HCD
 	tristate "ISP1362 HCD support"
-	depends on HAS_IOMEM
+	depends on HAS_IOPORT
 	depends on COMPILE_TEST # nothing uses this
 	help
 	  Supports the Philips ISP1362 chip as a host controller
@@ -605,7 +605,7 @@ endif # USB_OHCI_HCD
 
 config USB_UHCI_HCD
 	tristate "UHCI HCD (most Intel and VIA) support"
-	depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
+	depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC
 	help
 	  The Universal Host Controller Interface is a standard by Intel for
 	  accessing the USB hardware in the PC (which is also called the USB
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index ef08d68b9714..4fd06b48149d 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,23 @@
 #define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
 #define EHCI_USBLEGCTLSTS_SOOE	(1 << 13)	/* SMI on ownership change */
 
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG	0xF8
+#define ASMT_DATA_WRITE1_REG	0xFC
+#define ASMT_CONTROL_REG	0xE0
+#define ASMT_CONTROL_WRITE_BIT	0x02
+#define ASMT_WRITEREG_CMD	0x10423
+#define ASMT_FLOWCTL_ADDR	0xFA30
+#define ASMT_FLOWCTL_DATA	0xBA
+#define ASMT_PSEUDO_DATA	0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
+#define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
+
+#ifdef CONFIG_USB_PCI_AMD
 /* AMD quirk use */
 #define	AB_REG_BAR_LOW		0xe0
 #define	AB_REG_BAR_HIGH		0xe1
@@ -93,21 +110,6 @@
 #define	NB_PIF0_PWRDOWN_0	0x01100012
 #define	NB_PIF0_PWRDOWN_1	0x01100013
 
-#define USB_INTEL_XUSB2PR      0xD0
-#define USB_INTEL_USB2PRM      0xD4
-#define USB_INTEL_USB3_PSSEN   0xD8
-#define USB_INTEL_USB3PRM      0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG	0xF8
-#define ASMT_DATA_WRITE1_REG	0xFC
-#define ASMT_CONTROL_REG	0xE0
-#define ASMT_CONTROL_WRITE_BIT	0x02
-#define ASMT_WRITEREG_CMD	0x10423
-#define ASMT_FLOWCTL_ADDR	0xFA30
-#define ASMT_FLOWCTL_DATA	0xBA
-#define ASMT_PSEUDO_DATA	0
-
 /*
  * amd_chipset_gen values represent AMD different chipset generations
  */
@@ -460,50 +462,6 @@ void usb_amd_quirk_pll_disable(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
 
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
-	unsigned long retry_count;
-	unsigned char value;
-
-	for (retry_count = 1000; retry_count > 0; --retry_count) {
-
-		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
-		if (value == 0xff) {
-			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
-			return -EIO;
-		}
-
-		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
-			return 0;
-
-		udelay(50);
-	}
-
-	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
-	return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send command and address to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send data to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
 void usb_amd_quirk_pll_enable(void)
 {
 	usb_amd_quirk_pll(0);
@@ -632,7 +590,53 @@ bool usb_amd_pt_check_port(struct device *device, int port)
 	return !(value & BIT(port_shift));
 }
 EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif
+
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+	unsigned long retry_count;
+	unsigned char value;
+
+	for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+		if (value == 0xff) {
+			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+			return -EIO;
+		}
+
+		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+			return 0;
+
+		udelay(50);
+	}
+
+	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+	return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send command and address to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
 
+	/* send data to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
+#ifdef CONFIG_HAS_IOPORT
 /*
  * Make sure the controller is completely inactive, unable to
  * generate interrupts or do DMA.
@@ -713,6 +717,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
 	return 1;
 }
 EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+#endif
 
 static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
 {
@@ -725,6 +730,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
 
 static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
 {
+#ifdef HAS_IOPORT
 	unsigned long base = 0;
 	int i;
 
@@ -739,6 +745,7 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
 
 	if (base)
 		uhci_check_and_reset_hc(pdev, base);
+#endif
 }
 
 static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
@@ -1273,7 +1280,8 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev)
 			 "Can't enable PCI device, BIOS handoff failed.\n");
 		return;
 	}
-	if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
+	if (IS_ENABLED(CONFIG_USB_UHCI_HCD) &&
+	    pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
 		quirk_usb_handoff_uhci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
 		quirk_usb_handoff_ohci(pdev);
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7..5642318fd1d1 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,33 +2,48 @@
 #ifndef __LINUX_USB_PCI_QUIRKS_H
 #define __LINUX_USB_PCI_QUIRKS_H
 
-#ifdef CONFIG_USB_PCI
 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
+
+#ifdef CONFIG_USB_PCI_AMD
 bool usb_amd_hang_symptom_quirk(void);
 bool usb_amd_prefetch_quirk(void);
 void usb_amd_dev_put(void);
 bool usb_amd_quirk_pll_check(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
-void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
-void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 void sb800_prefetch(struct device *dev, int on);
 bool usb_amd_pt_check_port(struct device *device, int port);
 #else
-struct pci_dev;
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+	return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+	return false;
+}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+	return false;
+}
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
 static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 static inline void sb800_prefetch(struct device *dev, int on) {}
 static inline bool usb_amd_pt_check_port(struct device *device, int port)
 {
 	return false;
 }
+#endif /* CONFIG_USB_PCI_AMD */
+
+#ifdef CONFIG_USB_PCI
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+#else
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_USB_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index d90b869f5f40..a3b0d3d3b395 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -841,7 +841,7 @@ static int uhci_count_ports(struct usb_hcd *hcd)
 
 static const char hcd_name[] = "uhci_hcd";
 
-#ifdef CONFIG_USB_PCI
+#if defined(CONFIG_USB_PCI) && defined(CONFIG_HAS_IOPORT)
 #include "uhci-pci.c"
 #define	PCI_DRIVER		uhci_pci_driver
 #endif
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 8ae5ccd26753..be4aee1f0ca5 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -505,36 +505,43 @@ static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
  * we use memory mapped registers.
  */
 
+#ifdef CONFIG_HAS_IOPORT
+#define UHCI_IN(x)	x
+#define UHCI_OUT(x)	x
+#else
+#define UHCI_IN(x)	0
+#define UHCI_OUT(x)
+#endif
 #ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
 /* Support PCI only */
 static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
 {
-	return inl(uhci->io_addr + reg);
+	return UHCI_IN(inl(uhci->io_addr + reg));
 }
 
 static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
 {
-	outl(val, uhci->io_addr + reg);
+	UHCI_OUT(outl(val, uhci->io_addr + reg));
 }
 
 static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
 {
-	return inw(uhci->io_addr + reg);
+	return UHCI_IN(inw(uhci->io_addr + reg));
 }
 
 static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
 {
-	outw(val, uhci->io_addr + reg);
+	UHCI_OUT(outw(val, uhci->io_addr + reg));
 }
 
 static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
 {
-	return inb(uhci->io_addr + reg);
+	return UHCI_IN(inb(uhci->io_addr + reg));
 }
 
 static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
 {
-	outb(val, uhci->io_addr + reg);
+	UHCI_OUT(outb(val, uhci->io_addr + reg));
 }
 
 #else
@@ -587,7 +594,7 @@ static inline int uhci_aspeed_reg(unsigned int reg)
 static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
 {
 	if (uhci_has_pci_registers(uhci))
-		return inl(uhci->io_addr + reg);
+		return UHCI_IN(inl(uhci->io_addr + reg));
 	else if (uhci_is_aspeed(uhci))
 		return readl(uhci->regs + uhci_aspeed_reg(reg));
 #ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -601,7 +608,7 @@ static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
 static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
 {
 	if (uhci_has_pci_registers(uhci))
-		outl(val, uhci->io_addr + reg);
+		UHCI_OUT(outl(val, uhci->io_addr + reg));
 	else if (uhci_is_aspeed(uhci))
 		writel(val, uhci->regs + uhci_aspeed_reg(reg));
 #ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -615,7 +622,7 @@ static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
 static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
 {
 	if (uhci_has_pci_registers(uhci))
-		return inw(uhci->io_addr + reg);
+		return UHCI_IN(inw(uhci->io_addr + reg));
 	else if (uhci_is_aspeed(uhci))
 		return readl(uhci->regs + uhci_aspeed_reg(reg));
 #ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -629,7 +636,7 @@ static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
 static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
 {
 	if (uhci_has_pci_registers(uhci))
-		outw(val, uhci->io_addr + reg);
+		UHCI_OUT(outw(val, uhci->io_addr + reg));
 	else if (uhci_is_aspeed(uhci))
 		writel(val, uhci->regs + uhci_aspeed_reg(reg));
 #ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -643,7 +650,7 @@ static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
 static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
 {
 	if (uhci_has_pci_registers(uhci))
-		return inb(uhci->io_addr + reg);
+		return UHCI_IN(inb(uhci->io_addr + reg));
 	else if (uhci_is_aspeed(uhci))
 		return readl(uhci->regs + uhci_aspeed_reg(reg));
 #ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -657,7 +664,7 @@ static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
 static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
 {
 	if (uhci_has_pci_registers(uhci))
-		outb(val, uhci->io_addr + reg);
+		UHCI_OUT(outb(val, uhci->io_addr + reg));
 	else if (uhci_is_aspeed(uhci))
 		writel(val, uhci->regs + uhci_aspeed_reg(reg));
 #ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -668,6 +675,8 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
 		writeb(val, uhci->regs + reg);
 }
 #endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
+#undef UHCI_IN
+#undef UHCI_OUT
 
 /*
  * The GRLIB GRUSBHC controller can use big endian format for its descriptors.
-- 
2.32.0