All of lore.kernel.org
 help / color / mirror / Atom feed
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
To: <linux-kernel@vger.kernel.org>, <kvm@vger.kernel.org>
Cc: <pbonzini@redhat.com>, <mlevitsk@redhat.com>, <seanjc@google.com>,
	<joro@8bytes.org>, <jon.grimm@amd.com>, <wei.huang2@amd.com>,
	<terry.bowman@amd.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Pankaj Gupta <pankaj.gupta@amd.com>
Subject: [PATCH v5 03/17] KVM: SVM: Detect X2APIC virtualization (x2AVIC) support
Date: Wed, 18 May 2022 11:26:38 -0500	[thread overview]
Message-ID: <20220518162652.100493-4-suravee.suthikulpanit@amd.com> (raw)
In-Reply-To: <20220518162652.100493-1-suravee.suthikulpanit@amd.com>

Add CPUID check for the x2APIC virtualization (x2AVIC) feature.
If available, the SVM driver can support both AVIC and x2AVIC modes
when load the kvm_amd driver with avic=1. The operating mode will be
determined at runtime depending on the guest APIC mode.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/include/asm/svm.h |  3 +++
 arch/x86/kvm/svm/avic.c    | 45 ++++++++++++++++++++++++++++++++++++++
 arch/x86/kvm/svm/svm.c     | 15 ++-----------
 arch/x86/kvm/svm/svm.h     |  9 ++++++++
 4 files changed, 59 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index f70a5108d464..2c2a104b777e 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -195,6 +195,9 @@ struct __attribute__ ((__packed__)) vmcb_control_area {
 #define AVIC_ENABLE_SHIFT 31
 #define AVIC_ENABLE_MASK (1 << AVIC_ENABLE_SHIFT)
 
+#define X2APIC_MODE_SHIFT 30
+#define X2APIC_MODE_MASK (1 << X2APIC_MODE_SHIFT)
+
 #define LBR_CTL_ENABLE_MASK BIT_ULL(0)
 #define VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK BIT_ULL(1)
 
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index a8f514212b87..7d4e73e95acd 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -40,6 +40,9 @@
 #define AVIC_GATAG_TO_VMID(x)		((x >> AVIC_VCPU_ID_BITS) & AVIC_VM_ID_MASK)
 #define AVIC_GATAG_TO_VCPUID(x)		(x & AVIC_VCPU_ID_MASK)
 
+static bool force_avic;
+module_param_unsafe(force_avic, bool, 0444);
+
 /* Note:
  * This hash table is used to map VM_ID to a struct kvm_svm,
  * when handling AMD IOMMU GALOG notification to schedule in
@@ -50,6 +53,7 @@ static DEFINE_HASHTABLE(svm_vm_data_hash, SVM_VM_DATA_HASH_BITS);
 static u32 next_vm_id = 0;
 static bool next_vm_id_wrapped = 0;
 static DEFINE_SPINLOCK(svm_vm_data_hash_lock);
+enum avic_modes avic_mode;
 
 /*
  * This is a wrapper of struct amd_iommu_ir_data.
@@ -1077,3 +1081,44 @@ void avic_vcpu_unblocking(struct kvm_vcpu *vcpu)
 
 	avic_vcpu_load(vcpu);
 }
+
+/*
+ * Note:
+ * - The module param avic enable both xAPIC and x2APIC mode.
+ * - Hypervisor can support both xAVIC and x2AVIC in the same guest.
+ * - The mode can be switched at run-time.
+ */
+bool avic_hardware_setup(struct kvm_x86_ops *x86_ops)
+{
+	if (!npt_enabled)
+		return false;
+
+	if (boot_cpu_has(X86_FEATURE_AVIC)) {
+		avic_mode = AVIC_MODE_X1;
+		pr_info("AVIC enabled\n");
+	} else if (force_avic) {
+		/*
+		 * Some older systems does not advertise AVIC support.
+		 * See Revision Guide for specific AMD processor for more detail.
+		 */
+		avic_mode = AVIC_MODE_X1;
+		pr_warn("AVIC is not supported in CPUID but force enabled");
+		pr_warn("Your system might crash and burn");
+	}
+
+	/* AVIC is a prerequisite for x2AVIC. */
+	if (boot_cpu_has(X86_FEATURE_X2AVIC)) {
+		if (avic_mode == AVIC_MODE_X1) {
+			avic_mode = AVIC_MODE_X2;
+			pr_info("x2AVIC enabled\n");
+		} else {
+			pr_warn(FW_BUG "Cannot support x2AVIC due to AVIC is disabled");
+			pr_warn(FW_BUG "Try enable AVIC using force_avic option");
+		}
+	}
+
+	if (avic_mode != AVIC_MODE_NONE)
+		amd_iommu_register_ga_log_notifier(&avic_ga_log_notifier);
+
+	return !!avic_mode;
+}
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index aa7b387e0b7c..196bca5751a1 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -188,9 +188,6 @@ module_param(tsc_scaling, int, 0444);
 static bool avic;
 module_param(avic, bool, 0444);
 
-static bool force_avic;
-module_param_unsafe(force_avic, bool, 0444);
-
 bool __read_mostly dump_invalid_vmcb;
 module_param(dump_invalid_vmcb, bool, 0644);
 
@@ -4913,17 +4910,9 @@ static __init int svm_hardware_setup(void)
 			nrips = false;
 	}
 
-	enable_apicv = avic = avic && npt_enabled && (boot_cpu_has(X86_FEATURE_AVIC) || force_avic);
+	enable_apicv = avic = avic && avic_hardware_setup(&svm_x86_ops);
 
-	if (enable_apicv) {
-		if (!boot_cpu_has(X86_FEATURE_AVIC)) {
-			pr_warn("AVIC is not supported in CPUID but force enabled");
-			pr_warn("Your system might crash and burn");
-		} else
-			pr_info("AVIC enabled\n");
-
-		amd_iommu_register_ga_log_notifier(&avic_ga_log_notifier);
-	} else {
+	if (!enable_apicv) {
 		svm_x86_ops.vcpu_blocking = NULL;
 		svm_x86_ops.vcpu_unblocking = NULL;
 		svm_x86_ops.vcpu_get_apicv_inhibit_reasons = NULL;
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 32220a1b0ea2..1731c1f3884b 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -36,6 +36,14 @@ extern bool npt_enabled;
 extern int vgif;
 extern bool intercept_smi;
 
+enum avic_modes {
+	AVIC_MODE_NONE = 0,
+	AVIC_MODE_X1,
+	AVIC_MODE_X2,
+};
+
+extern enum avic_modes avic_mode;
+
 /*
  * Clean bits in VMCB.
  * VMCB_ALL_CLEAN_MASK might also need to
@@ -603,6 +611,7 @@ extern struct kvm_x86_nested_ops svm_nested_ops;
 
 /* avic.c */
 
+bool avic_hardware_setup(struct kvm_x86_ops *ops);
 int avic_ga_log_notifier(u32 ga_tag);
 void avic_vm_destroy(struct kvm *kvm);
 int avic_vm_init(struct kvm *kvm);
-- 
2.25.1


  parent reply	other threads:[~2022-05-18 16:27 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-18 16:26 [PATCH v5 00/17] Introducing AMD x2AVIC and hybrid-AVIC modes Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 01/17] x86/cpufeatures: Introduce x2AVIC CPUID bit Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 02/17] KVM: x86: lapic: Rename [GET/SET]_APIC_DEST_FIELD to [GET/SET]_XAPIC_DEST_FIELD Suravee Suthikulpanit
2022-05-18 16:26 ` Suravee Suthikulpanit [this message]
2022-05-18 16:26 ` [PATCH v5 04/17] KVM: SVM: Update max number of vCPUs supported for x2AVIC mode Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 05/17] KVM: SVM: Update avic_kick_target_vcpus to support 32-bit APIC ID Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 06/17] KVM: SVM: Do not support updating APIC ID when in x2APIC mode Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 07/17] KVM: SVM: Adding support for configuring x2APIC MSRs interception Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 08/17] KVM: x86: Deactivate APICv on vCPU with APIC disabled Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 09/17] KVM: SVM: Refresh AVIC configuration when changing APIC mode Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 10/17] KVM: SVM: Introduce helper functions to (de)activate AVIC and x2AVIC Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 11/17] KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 12/17] KVM: SVM: Introduce hybrid-AVIC mode Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 13/17] KVM: x86: Warning APICv inconsistency only when vcpu APIC mode is valid Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 14/17] KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 15/17] KVM: SVM: Add AVIC doorbell tracepoint Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 16/17] KVM: x86: nSVM: always intercept x2apic msrs Suravee Suthikulpanit
2022-05-18 17:18   ` Maxim Levitsky
2022-05-18 17:25     ` Maxim Levitsky
2022-05-19 10:29     ` Suravee Suthikulpanit
2022-05-18 16:26 ` [PATCH v5 17/17] KVM: x86: nSVM: optimize svm_set_x2apic_msr_interception Suravee Suthikulpanit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220518162652.100493-4-suravee.suthikulpanit@amd.com \
    --to=suravee.suthikulpanit@amd.com \
    --cc=jon.grimm@amd.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pankaj.gupta@amd.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=terry.bowman@amd.com \
    --cc=wei.huang2@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.