From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Marijn Suijten <marijn.suijten@somainline.org>
Subject: [PATCH v2 2/4] arm64: dts: qcom: sdm660: add device node for the compute PAS
Date: Sat, 21 May 2022 23:35:18 +0300 [thread overview]
Message-ID: <20220521203520.1513565-3-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220521203520.1513565-1-dmitry.baryshkov@linaro.org>
Add device tree node describing CDSP device found on the SDM660 (but not
on SDM630) platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm660.dtsi | 68 ++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index f51f5b27819f..1869eeaff066 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -16,6 +16,74 @@
* enabled upstream.
*/
+/ {
+ reserved-memory {
+ /delete-node/ tzbuffer@94a00000;
+
+ cdsp_region: cdsp@94a00000 {
+ reg = <0x0 0x94a00000 0x0 0x600000>;
+ no-map;
+ };
+
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts = <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 30>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ soc {
+ cdsp_pil: remoteproc@1a300000 {
+ compatible = "qcom,sdm660-cdsp-pas";
+ reg = <0x1a300000 0x4040>;
+
+ interrupts-extended =
+ <&intc GIC_SPI 518 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ memory-region = <&cdsp_region>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
+ power-domain-names = "cx";
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts = <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>;
+
+ label = "turing";
+ mboxes = <&apcs_glb 29>;
+ qcom,remote-pid = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+};
+
&adreno_gpu {
compatible = "qcom,adreno-512.0", "qcom,adreno";
/* Adreno 512 shares the frequency table with 509 */
--
2.35.1
next prev parent reply other threads:[~2022-05-21 20:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-21 20:35 [PATCH v2 0/4] arm64: dts: qcom: enable CDSP and MSS on ifc6560 board Dmitry Baryshkov
2022-05-21 20:35 ` [PATCH v2 1/4] arm64: dts: qcom: sdm660: move device nodes to sdm636 Dmitry Baryshkov
2022-06-29 18:48 ` Konrad Dybcio
2022-05-21 20:35 ` Dmitry Baryshkov [this message]
2022-06-29 18:50 ` [PATCH v2 2/4] arm64: dts: qcom: sdm660: add device node for the compute PAS Konrad Dybcio
2022-05-21 20:35 ` [PATCH v2 3/4] arm64: dts: qcom: sdm630: add device node for the modem PAS Dmitry Baryshkov
2022-06-29 18:56 ` Konrad Dybcio
2022-05-21 20:35 ` [PATCH v2 4/4] arm64: dts: qcom: sda660-inforce-ifc6560: enable cdsp and modem Dmitry Baryshkov
2022-06-29 18:56 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220521203520.1513565-3-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.