From: Harman Kalra <hkalra@marvell.com>
To: <dev@dpdk.org>, Jerin Jacob <jerinj@marvell.com>
Cc: Harman Kalra <hkalra@marvell.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>
Subject: [PATCH v3 01/11] event/octeontx: fix SSO fastpath
Date: Tue, 24 May 2022 14:12:25 +0530 [thread overview]
Message-ID: <20220524084235.17796-1-hkalra@marvell.com> (raw)
In-Reply-To: <20220517173941.189330-2-hkalra@marvell.com>
Segmentation fault is observed as soon as any dpdk application
with ethdev event is launched. Handling the event types
appropriately.
Also fixing sub event type violation as in OCTEONTX event device we
use sub_event_type to store the ethernet port identifier when we receive
work from OCTEONTX ethernet device. This violates the event device spec
as sub_event_type should be 0 in the initial receive stage.
Set sub_event_type to 0 after copying the port id in single workslot
mode.
Fixes: 8dc6c2f12ecf ("crypto/octeontx: add crypto adapter data path")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
V3:
* fixing sub event type violation
V2:
* Seperated out a generic patch from the series
drivers/event/octeontx/ssovf_worker.h | 24 +++++++++++++++---------
1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/event/octeontx/ssovf_worker.h b/drivers/event/octeontx/ssovf_worker.h
index e6ee292688..57be476394 100644
--- a/drivers/event/octeontx/ssovf_worker.h
+++ b/drivers/event/octeontx/ssovf_worker.h
@@ -179,16 +179,22 @@ ssows_get_work(struct ssows *ws, struct rte_event *ev, const uint16_t flag)
ev->event = sched_type_queue | (get_work0 & 0xffffffff);
if (get_work1) {
- if (ev->event_type == RTE_EVENT_TYPE_ETHDEV)
- get_work1 = (uintptr_t)ssovf_octeontx_wqe_to_pkt(
- get_work1, (ev->event >> 20) & 0x7F, flag,
- ws->lookup_mem);
- else if (ev->event_type == RTE_EVENT_TYPE_CRYPTODEV)
+ if (ev->event_type == RTE_EVENT_TYPE_ETHDEV) {
+ uint16_t port = (ev->event >> 20) & 0x7F;
+
+ ev->sub_event_type = 0;
+ ev->mbuf = ssovf_octeontx_wqe_to_pkt(
+ get_work1, port, flag, ws->lookup_mem);
+ } else if (ev->event_type == RTE_EVENT_TYPE_CRYPTODEV) {
get_work1 = otx_crypto_adapter_dequeue(get_work1);
- ev->u64 = get_work1;
- } else if (unlikely((get_work0 & 0xFFFFFFFF) == 0xFFFFFFFF)) {
- ssovf_octeontx_wqe_free(get_work1);
- return 0;
+ ev->u64 = get_work1;
+ } else {
+ if (unlikely((get_work0 & 0xFFFFFFFF) == 0xFFFFFFFF)) {
+ ssovf_octeontx_wqe_free(get_work1);
+ return 0;
+ }
+ ev->u64 = get_work1;
+ }
}
return !!get_work1;
--
2.18.0
next prev parent reply other threads:[~2022-05-24 8:42 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-17 17:39 [PATCH 01/12] config: add thundert83 config Harman Kalra
2022-05-17 17:39 ` [PATCH 02/12] event/octeontx: fix SSO fastpath Harman Kalra
2022-05-23 16:10 ` [PATCH v2 01/11] " Harman Kalra
2022-05-23 16:10 ` [PATCH v2 02/11] net/octeontx: fix port close Harman Kalra
2022-05-23 16:10 ` [PATCH v2 03/11] net/octeontx: setting link attributes Harman Kalra
2022-05-23 16:10 ` [PATCH v2 04/11] net/octeontx: handle port reconfiguration Harman Kalra
2022-05-23 16:10 ` [PATCH v2 05/11] net/thunderx: implement polling of link state change Harman Kalra
2022-05-23 16:10 ` [PATCH v2 06/11] net/thunderx: reset Rx DMAC control register Harman Kalra
2022-05-23 16:10 ` [PATCH v2 07/11] net/thunderx: setting link attributes Harman Kalra
2022-05-23 16:10 ` [PATCH v2 08/11] net/octeontx: implement xstats Harman Kalra
2022-05-23 16:10 ` [PATCH v2 09/11] net/octeontx: support allmulticast Harman Kalra
2022-05-23 16:10 ` [PATCH v2 10/11] net/thunderx: device attach from secondary Harman Kalra
2022-05-23 16:11 ` [PATCH v2 11/11] net/thunderx: populate max and min MTU values Harman Kalra
2022-05-24 8:42 ` Harman Kalra [this message]
2022-05-24 8:42 ` [PATCH v3 02/11] net/octeontx: fix port close Harman Kalra
2022-05-24 8:42 ` [PATCH v3 03/11] net/octeontx: setting link attributes Harman Kalra
2022-05-24 8:42 ` [PATCH v3 04/11] net/octeontx: handle port reconfiguration Harman Kalra
2022-05-24 8:42 ` [PATCH v3 05/11] net/thunderx: implement polling of link state change Harman Kalra
2022-05-24 8:42 ` [PATCH v3 06/11] net/thunderx: reset Rx DMAC control register Harman Kalra
2022-05-24 8:42 ` [PATCH v3 07/11] net/thunderx: setting link attributes Harman Kalra
2022-05-24 8:42 ` [PATCH v3 08/11] net/octeontx: implement xstats Harman Kalra
2022-06-09 16:13 ` Jerin Jacob
2022-05-24 8:42 ` [PATCH v3 09/11] net/octeontx: support allmulticast Harman Kalra
2022-05-24 8:42 ` [PATCH v3 10/11] net/thunderx: device attach from secondary Harman Kalra
2022-05-24 8:42 ` [PATCH v3 11/11] net/thunderx: populate max and min MTU values Harman Kalra
2022-06-09 15:55 ` Jerin Jacob
2022-06-09 15:53 ` [PATCH v3 01/11] event/octeontx: fix SSO fastpath Jerin Jacob
2022-05-17 17:39 ` [PATCH 03/12] net/octeontx: fix port close Harman Kalra
2022-05-17 17:39 ` [PATCH 04/12] net/octeontx: setting link attributes Harman Kalra
2022-05-17 17:39 ` [PATCH 05/12] net/octeontx: handle port reconfiguration Harman Kalra
2022-05-17 17:39 ` [PATCH 06/12] net/thunderx: implement polling of link state change Harman Kalra
2022-05-17 17:39 ` [PATCH 07/12] net/thunderx: reset Rx DMAC control register Harman Kalra
2022-05-17 17:39 ` [PATCH 08/12] net/thunderx: setting link attributes Harman Kalra
2022-05-17 17:39 ` [PATCH 09/12] net/octeontx: implement xstats Harman Kalra
2022-05-17 17:39 ` [PATCH 10/12] net/octeontx: support allmulticast Harman Kalra
2022-05-17 17:39 ` [PATCH 11/12] net/thunderx: device attach from secondary Harman Kalra
2022-05-17 17:39 ` [PATCH 12/12] net/thunderx: populate max and min MTU values Harman Kalra
2022-05-18 6:10 ` [PATCH 01/12] config: add thundert83 config Ruifeng Wang
2022-05-23 13:34 ` [PATCH v2] config: add thunderX t83 config Harman Kalra
2022-06-01 22:02 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220524084235.17796-1-hkalra@marvell.com \
--to=hkalra@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=pbhagavatula@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.