All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aloka Dixit <quic_alokad@quicinc.com>
To: <johannes@sipsolutions.net>, <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 04/10] ath11k: MBSSID configuration during vdev create/start
Date: Mon, 14 Nov 2022 12:19:06 -0800	[thread overview]
Message-ID: <20221114201912.22893-5-quic_alokad@quicinc.com> (raw)
In-Reply-To: <20221114201912.22893-1-quic_alokad@quicinc.com>

Configure multiple BSSID flags and index of the transmitting interface
in vdev create/start commands depending on the service bit
WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT.

Tested-on : IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
---
v2: Rebase only

drivers/net/wireless/ath/ath11k/mac.c | 70 +++++++++++++++++++++++++--
 drivers/net/wireless/ath/ath11k/wmi.c |  5 ++
 drivers/net/wireless/ath/ath11k/wmi.h | 22 +++++++++
 3 files changed, 93 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 26616a7fc7e6..2b96205e996e 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5977,17 +5977,62 @@ static void ath11k_mac_op_stop(struct ieee80211_hw *hw)
 	atomic_set(&ar->num_pending_mgmt_tx, 0);
 }
 
-static void
-ath11k_mac_setup_vdev_create_params(struct ath11k_vif *arvif,
-				    struct vdev_create_params *params)
+static int ath11k_mac_setup_vdev_params_mbssid(struct ath11k_vif *arvif,
+					       u32 *flags, u32 *tx_vdev_id)
+{
+	struct ath11k *ar = arvif->ar;
+	struct ath11k_vif *tx_arvif;
+	struct ieee80211_vif *tx_vif;
+
+	*tx_vdev_id = 0;
+	tx_vif = arvif->vif->mbssid_tx_vif;
+	if (!tx_vif) {
+		*flags = WMI_HOST_VDEV_FLAGS_NON_MBSSID_AP;
+		return 0;
+	}
+
+	tx_arvif = (void *)tx_vif->drv_priv;
+
+	if (arvif->vif->bss_conf.nontransmitted) {
+		if (ar->hw->wiphy != ieee80211_vif_to_wdev(tx_vif)->wiphy)
+			return -EINVAL;
+
+		*flags = WMI_HOST_VDEV_FLAGS_NON_TRANSMIT_AP;
+		*tx_vdev_id = ath11k_vif_to_arvif(tx_vif)->vdev_id;
+	} else if (tx_arvif == arvif) {
+		*flags = WMI_HOST_VDEV_FLAGS_TRANSMIT_AP;
+	} else {
+		return -EINVAL;
+	}
+
+	if (arvif->vif->bss_conf.ema_ap)
+		*flags |= WMI_HOST_VDEV_FLAGS_EMA_MODE;
+
+	return 0;
+}
+
+static int ath11k_mac_setup_vdev_create_params(struct ath11k_vif *arvif,
+					       struct vdev_create_params *params)
 {
 	struct ath11k *ar = arvif->ar;
 	struct ath11k_pdev *pdev = ar->pdev;
+	int ret;
 
 	params->if_id = arvif->vdev_id;
 	params->type = arvif->vdev_type;
 	params->subtype = arvif->vdev_subtype;
 	params->pdev_id = pdev->pdev_id;
+	params->mbssid_flags = 0;
+	params->mbssid_tx_vdev_id = 0;
+
+	if (!test_bit(WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT,
+		      ar->ab->wmi_ab.svc_map)) {
+		ret = ath11k_mac_setup_vdev_params_mbssid(arvif,
+							  &params->mbssid_flags,
+							  &params->mbssid_tx_vdev_id);
+		if (ret)
+			return ret;
+	}
 
 	if (pdev->cap.supported_bands & WMI_HOST_WLAN_2G_CAP) {
 		params->chains[NL80211_BAND_2GHZ].tx = ar->num_tx_chains;
@@ -6002,6 +6047,7 @@ ath11k_mac_setup_vdev_create_params(struct ath11k_vif *arvif,
 		params->chains[NL80211_BAND_6GHZ].tx = ar->num_tx_chains;
 		params->chains[NL80211_BAND_6GHZ].rx = ar->num_rx_chains;
 	}
+	return 0;
 }
 
 static u32
@@ -6359,7 +6405,12 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
 	for (i = 0; i < ARRAY_SIZE(vif->hw_queue); i++)
 		vif->hw_queue[i] = i % (ATH11K_HW_MAX_QUEUES - 1);
 
-	ath11k_mac_setup_vdev_create_params(arvif, &vdev_param);
+	ret = ath11k_mac_setup_vdev_create_params(arvif, &vdev_param);
+	if (ret) {
+		ath11k_warn(ab, "failed to create vdev parameters %d: %d\n",
+			    arvif->vdev_id, ret);
+		goto err;
+	}
 
 	ret = ath11k_wmi_vdev_create(ar, vif->addr, &vdev_param);
 	if (ret) {
@@ -6760,6 +6811,17 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
 	arg.pref_tx_streams = ar->num_tx_chains;
 	arg.pref_rx_streams = ar->num_rx_chains;
 
+	arg.mbssid_flags = 0;
+	arg.mbssid_tx_vdev_id = 0;
+	if (test_bit(WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT,
+		     ar->ab->wmi_ab.svc_map)) {
+		ret = ath11k_mac_setup_vdev_params_mbssid(arvif,
+							  &arg.mbssid_flags,
+							  &arg.mbssid_tx_vdev_id);
+		if (ret)
+			return ret;
+	}
+
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
 		arg.ssid = arvif->u.ap.ssid;
 		arg.ssid_len = arvif->u.ap.ssid_len;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 97f6914354fd..6a1d9ad699e2 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -716,6 +716,9 @@ int ath11k_wmi_vdev_create(struct ath11k *ar, u8 *macaddr,
 	cmd->vdev_subtype = param->subtype;
 	cmd->num_cfg_txrx_streams = WMI_NUM_SUPPORTED_BAND_MAX;
 	cmd->pdev_id = param->pdev_id;
+	cmd->mbssid_flags = param->mbssid_flags;
+	cmd->mbssid_tx_vdev_id = param->mbssid_tx_vdev_id;
+
 	ether_addr_copy(cmd->vdev_macaddr.addr, macaddr);
 
 	ptr = skb->data + sizeof(*cmd);
@@ -932,6 +935,8 @@ int ath11k_wmi_vdev_start(struct ath11k *ar, struct wmi_vdev_start_req_arg *arg,
 	cmd->cac_duration_ms = arg->cac_duration_ms;
 	cmd->regdomain = arg->regdomain;
 	cmd->he_ops = arg->he_ops;
+	cmd->mbssid_flags = arg->mbssid_flags;
+	cmd->mbssid_tx_vdev_id = arg->mbssid_tx_vdev_id;
 
 	if (!restart) {
 		if (arg->ssid) {
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 39e301b2cf8f..5d915adfe90c 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -137,6 +137,14 @@ enum {
 	WMI_AUTORATE_3200NS_GI = BIT(11),
 };
 
+enum {
+	WMI_HOST_VDEV_FLAGS_NON_MBSSID_AP       = 0x00000001,
+	WMI_HOST_VDEV_FLAGS_TRANSMIT_AP         = 0x00000002,
+	WMI_HOST_VDEV_FLAGS_NON_TRANSMIT_AP     = 0x00000004,
+	WMI_HOST_VDEV_FLAGS_EMA_MODE            = 0x00000008,
+	WMI_HOST_VDEV_FLAGS_SCAN_MODE_VAP       = 0x00000010,
+};
+
 /*
  * wmi command groups.
  */
@@ -2092,6 +2100,10 @@ enum wmi_tlv_service {
 	WMI_TLV_SERVICE_EXT2_MSG = 220,
 	WMI_TLV_SERVICE_PEER_POWER_SAVE_DURATION_SUPPORT = 246,
 	WMI_TLV_SERVICE_SRG_SRP_SPATIAL_REUSE_SUPPORT = 249,
+	WMI_TLV_REQUEST_CTRL_PATH_STATS_REQUEST = 250,
+	WMI_TLV_SERVICE_TPC_STATS_EVENT = 251,
+	WMI_TLV_SERVICE_NO_INTERBAND_MCC_SUPPORT = 252,
+	WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT = 253,
 
 	/* The second 128 bits */
 	WMI_MAX_EXT_SERVICE = 256,
@@ -2572,6 +2584,8 @@ struct vdev_create_params {
 		u8 rx;
 	} chains[NUM_NL80211_BANDS];
 	u32 pdev_id;
+	u32 mbssid_flags;
+	u32 mbssid_tx_vdev_id;
 };
 
 struct wmi_vdev_create_cmd {
@@ -2582,6 +2596,8 @@ struct wmi_vdev_create_cmd {
 	struct wmi_mac_addr vdev_macaddr;
 	u32 num_cfg_txrx_streams;
 	u32 pdev_id;
+	u32 mbssid_flags;
+	u32 mbssid_tx_vdev_id;
 } __packed;
 
 struct wmi_vdev_txrx_streams {
@@ -2645,6 +2661,9 @@ struct wmi_vdev_start_request_cmd {
 	u32 he_ops;
 	u32 cac_duration_ms;
 	u32 regdomain;
+	u32 min_data_rate;
+	u32 mbssid_flags;
+	u32 mbssid_tx_vdev_id;
 } __packed;
 
 #define MGMT_TX_DL_FRM_LEN		     64
@@ -2814,6 +2833,9 @@ struct wmi_vdev_start_req_arg {
 	u32 pref_rx_streams;
 	u32 pref_tx_streams;
 	u32 num_noa_descriptors;
+	u32 min_data_rate;
+	u32 mbssid_flags;
+	u32 mbssid_tx_vdev_id;
 };
 
 struct peer_create_params {
-- 
2.17.1


  parent reply	other threads:[~2022-11-14 20:19 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-14 20:19 [PATCH v2 00/10] MBSSID and EMA support in AP mode Aloka Dixit
2022-11-14 20:19 ` [PATCH v2 01/10] mac80211: generate EMA beacons " Aloka Dixit
2022-12-02 16:44   ` Jouni Malinen
2022-12-05 19:40     ` Aloka Dixit
2022-12-05 23:00       ` Aloka Dixit
2022-11-14 20:19 ` [PATCH v2 02/10] ath11k: add WMI resource config for EMA Aloka Dixit
2022-11-16  9:47   ` Kalle Valo
2022-11-14 20:19 ` [PATCH v2 03/10] ath11k: set MBSSID and EMA driver capabilities Aloka Dixit
2022-11-14 20:19 ` Aloka Dixit [this message]
2022-11-14 20:19 ` [PATCH v2 05/10] ath11k: create a structure for WMI vdev up parameters Aloka Dixit
2022-11-14 20:19 ` [PATCH v2 06/10] ath11k: rename struct wmi_vdev_up_cmd members Aloka Dixit
2022-11-14 20:19 ` [PATCH v2 07/10] ath11k: configure MBSSID device parameters Aloka Dixit
2022-11-14 20:19 ` [PATCH v2 08/10] ath11k: move vif parameter setting in a different function Aloka Dixit
2022-11-14 20:19 ` [PATCH v2 09/10] ath11k: EMA beacon support Aloka Dixit
2022-11-14 20:19 ` [PATCH v2 10/10] ath11k: configure WPA and RSN parameters for nontransmitting interface Aloka Dixit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221114201912.22893-5-quic_alokad@quicinc.com \
    --to=quic_alokad@quicinc.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.