From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Oliver Hartkopp <socketcan@hartkopp.net>,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
linux-can@vger.kernel.org
Cc: kernel@pengutronix.de
Subject: Re: [net-rfc 04/16] can: dev: can_get_len(): add a helper function to get the correct length of Classical frames
Date: Tue, 20 Oct 2020 17:02:00 +0200 [thread overview]
Message-ID: <24c434cf-95c2-8936-387b-cb651c029781@pengutronix.de> (raw)
In-Reply-To: <6f869e47-9a76-3398-0b64-2d573d412f4c@hartkopp.net>
[-- Attachment #1.1: Type: text/plain, Size: 1263 bytes --]
On 10/20/20 2:38 PM, Oliver Hartkopp wrote:
[...]
> You can create a DLC of 13 for Classical CAN. And your CAN controller
> gets 8 bytes from it and says to the network layer: Here is a CAN frame
> with 8 bytes payload.
>
> Have you ever read out a CAN controller register and found a value
> greater than 8 on the register of the DLC value?
>
> I believe you didn't. The CAN controller sees the DLC but provides 8
> bytes as DLC=8.
I just checked on the flexcan (mx6) and the mcp2518fd. I hardcoded a TX-dlc of
12 in both drivers and printed the raw dlc value in the RX-path:
> Oct 20 16:46:08 riot kernel: flexcan_mailbox_read: dlc=12
> Oct 20 16:46:10 riot kernel: mcp251xfd_hw_rx_obj_to_skb: dlc=12
The userspace shows a consistent len=8.
If we want to support CAN-2.0 with DLC > 8, we have to audit the TX-path every
driver and remove the can_dropped_invalid_skb() check.
I'm not sure what to do about the RX, with breaking user space ABI.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2020-10-20 15:02 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-19 19:05 [RFC]: can 2020-10-19 Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 01/16] can: proc: can_remove_proc(): silence remove_proc_entry warning Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 02/16] can: rx-offload: don't call kfree_skb() from IRQ context Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 03/16] can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard " Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 04/16] can: dev: can_get_len(): add a helper function to get the correct length of Classical frames Marc Kleine-Budde
2020-10-19 20:35 ` Oliver Hartkopp
2020-10-20 6:35 ` Marc Kleine-Budde
2020-10-20 11:30 ` Vincent Mailhol
2020-10-20 11:48 ` Marc Kleine-Budde
2020-10-20 12:38 ` Oliver Hartkopp
2020-10-20 15:02 ` Marc Kleine-Budde [this message]
2020-10-20 16:07 ` Vincent Mailhol
2020-10-20 17:04 ` Oliver Hartkopp
2020-10-20 18:50 ` Marc Kleine-Budde
2020-10-21 0:52 ` Vincent Mailhol
2020-10-21 6:23 ` Vincent MAILHOL
2020-10-21 7:11 ` Joakim Zhang
2020-10-21 7:21 ` Marc Kleine-Budde
2020-10-21 7:48 ` Joakim Zhang
2020-10-21 9:21 ` Oliver Hartkopp
2020-10-21 9:48 ` Oliver Hartkopp
2020-10-21 11:55 ` Vincent MAILHOL
2020-10-21 17:52 ` Oliver Hartkopp
2020-10-22 3:30 ` Vincent MAILHOL
2020-10-22 7:15 ` Oliver Hartkopp
2020-10-22 12:23 ` Vincent MAILHOL
2020-10-22 13:28 ` Oliver Hartkopp
2020-10-22 15:46 ` Vincent MAILHOL
2020-10-22 17:06 ` Oliver Hartkopp
2020-10-23 10:36 ` Vincent MAILHOL
2020-10-23 16:47 ` Oliver Hartkopp
2020-10-24 5:25 ` Vincent MAILHOL
2020-10-24 11:31 ` Oliver Hartkopp
2020-10-19 19:05 ` [net-rfc 05/16] can: dev: __can_get_echo_skb(): fix the returned length of CAN frame Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 06/16] can: can_create_echo_skb(): fix echo skb generation: always use skb_clone() Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 07/16] can: j1939: j1939_sk_bind(): return failure if netdev is down Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 08/16] can: isotp: Explain PDU in CAN_ISOTP help text Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 09/16] can: isotp: enable RX timeout handling in listen-only mode Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 10/16] can: ti_hecc: add missed clk_disable_unprepare() in error path Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 11/16] can: xilinx_can: handle failure cases of pm_runtime_get_sync Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 12/16] can: peak_usb: fix timestamp wrapping Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 13/16] can: peak_canfd: fix echo management when loopback is on Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 14/16] can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 15/16] can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings Marc Kleine-Budde
2020-10-19 19:05 ` [net-rfc 16/16] can: mcp251xfd: remove unneeded break Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=24c434cf-95c2-8936-387b-cb651c029781@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=kernel@pengutronix.de \
--cc=linux-can@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.