On 10/26/20 2:59 AM, Drew Fustini wrote:
>>> The
>>> https://github.com/marckleinebudde/linux/commits/v5.4-rpi/mcp251xfd-20201022-54
>>> branch already contains overlays:
>>>
>>> https://github.com/marckleinebudde/linux/commit/9e02abd4fe591b2d7f369cdaaaf8f1269b7c8693

> Are there any additional parameters that you are specifying for
> "dtoverlay" in config.txt, such as spimaxfrequency?

Usually I only specify the IRQ.

E.g.: For the

    https://wiki.seeedstudio.com/2-Channel-CAN-BUS-FD-Shield-for-Raspberry-Pi/

board I'm using:

dtoverlay=mcp251xfd-spi0-0,interrupt=25
dtoverlay=mcp251xfd-spi1-0,interrupt=24

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |