From mboxrd@z Thu Jan 1 00:00:00 1970 From: Viresh Kumar Subject: [PATCH V2 Resend 12/14] cpufreq: cpu0: Extend support beyond CPU0 Date: Wed, 2 Jul 2014 09:33:24 +0530 Message-ID: <3644ffb33bc8f4f5aac56f553c228361a9934d79.1404273178.git.viresh.kumar@linaro.org> References: Return-path: In-Reply-To: In-Reply-To: <89da404a3b8f545774f5782d901b8381caf02c07.1404231535.git.viresh.kumar@linaro.org> References: Sender: linux-kernel-owner@vger.kernel.org To: rjw@rjwysocki.net, shawn.guo@linaro.org Cc: linaro-kernel@lists.linaro.org, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, arvind.chauhan@arm.com, sboyd@codeaurora.org, linux-arm-msm@vger.kernel.org, spk.linux@gmail.com, thomas.ab@samsung.com, nm@ti.com, t.figa@samsung.com, Viresh Kumar , devicetree@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org Most of the infrastructure is in place now, with only little left. How to find siblings ? Stephen Boyd suggested to compare "clocks" properties from CPU's DT node and siblings should match. This patch adds another routine find_siblings() which calls of_property_match() to find if CPUs share clock line or not. If of_property_match() returns error, we fallback to all CPUs sharing clock line assumption as existing platforms don't have "clocks" property in all CPU nodes and would fail from of_property_match(). Cc: devicetree@vger.kernel.org Signed-off-by: Viresh Kumar --- V2 Resend: Use of_property_match() directly instead of of_clk_shared_by_cpus() which would be dropped now. .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 72 ++++++++++++++++++++-- drivers/cpufreq/cpufreq-cpu0.c | 62 ++++++++++++++++++- 2 files changed, 128 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt index 366690c..9d65799 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -1,11 +1,11 @@ -Generic CPU0 cpufreq driver +Generic cpufreq driver -It is a generic cpufreq driver for CPU0 frequency management. It +It is a generic cpufreq driver for frequency management. It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) -systems which share clock and voltage across all CPUs. +systems which may or maynot share clock and voltage across all CPUs. Both required and optional properties listed below must be defined -under node /cpus/cpu@0. +under node /cpus/cpu@x. Where x is the first cpu inside a cluster. Required properties: - None @@ -21,9 +21,16 @@ Optional properties: - cooling-min-level: - cooling-max-level: Please refer to Documentation/devicetree/bindings/thermal/thermal.txt. +- clocks: If CPU clock is populated from DT, "clocks" property must be copied to + every cpu node sharing clock with cpu@x. Generic cpufreq driver compares + "clocks" to find siblings, i.e. to see which CPUs share clock/voltages. If + only cpu@0 contains "clocks" property it is assumed that all CPUs share clock + line. Examples: +1. All CPUs share clock/voltages + cpus { #address-cells = <1>; #size-cells = <0>; @@ -38,6 +45,8 @@ cpus { 396000 950000 198000 850000 >; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; cooling-min-level = <0>; @@ -48,17 +57,72 @@ cpus { compatible = "arm,cortex-a9"; reg = <1>; next-level-cache = <&L2>; + clocks = <&clock CLK_ARM_CLK>; }; cpu@2 { compatible = "arm,cortex-a9"; reg = <2>; next-level-cache = <&L2>; + clocks = <&clock CLK_ARM_CLK>; }; cpu@3 { compatible = "arm,cortex-a9"; reg = <3>; next-level-cache = <&L2>; + clocks = <&clock CLK_ARM_CLK>; + }; +}; + + +2. All CPUs inside a cluster share clock/voltages, there are multiple clusters. + +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a15"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + clocks = <&clock CLK_ARM1_CLK>; + clock-names = "cpu"; + clock-latency = <61036>; /* two CLK32 periods */ + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clock CLK_ARM1_CLK>; + }; + + cpu@100 { + compatible = "arm,cortex-a7"; + reg = <100>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 950000 + 396000 750000 + 198000 450000 + >; + clocks = <&clock CLK_ARM2_CLK>; + clock-names = "cpu"; + clock-latency = <61036>; /* two CLK32 periods */ + }; + + cpu@101 { + compatible = "arm,cortex-a7"; + reg = <101>; + next-level-cache = <&L2>; + clocks = <&clock CLK_ARM2_CLK>; }; }; diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 44633f6..0f2fe76 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -177,6 +177,57 @@ try_again: return ret; } +/* + * Sets all CPUs as sibling if any cpu doesn't have a "clocks" property, + * Otherwise it matches "clocks" property to find siblings. + */ +static void find_siblings(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + struct device *cpu1_dev = priv->cpu_dev, *cpu2_dev; + struct device_node *np1, *np2; + int cpu, ret, set_all = 1; + + np1 = of_node_get(cpu1_dev->of_node); + + for_each_possible_cpu(cpu) { + if (cpu == policy->cpu) + continue; + + cpu2_dev = get_cpu_device(cpu); + if (!cpu2_dev) { + dev_err(cpu1_dev, "%s: failed to cpu_dev for cpu%d\n", + __func__, cpu); + goto out_set_all; + } + + np2 = of_node_get(cpu2_dev->of_node); + if (!np2) { + dev_err(cpu1_dev, "failed to find cpu%d node\n", cpu); + goto out_set_all; + } + + ret = of_property_match(np1, np2, "clocks"); + of_node_put(np2); + + /* Error while parsing nodes, fallback to set-all */ + if (ret < 0) + goto out_set_all; + else if (ret == 1) + cpumask_set_cpu(cpu, policy->cpus); + } + + /* All processors don't share clock and voltage */ + set_all = 0; + +out_set_all: + /* All processors share clock and voltage */ + if (set_all) + cpumask_setall(policy->cpus); + + of_node_put(np1); +} + static int cpu0_cpufreq_init(struct cpufreq_policy *policy) { struct cpufreq_frequency_table *freq_table; @@ -266,9 +317,16 @@ static int cpu0_cpufreq_init(struct cpufreq_policy *policy) policy->driver_data = priv; policy->clk = cpu_clk; - ret = cpufreq_generic_init(policy, freq_table, transition_latency); - if (ret) + + find_siblings(policy); + ret = cpufreq_table_validate_and_show(policy, freq_table); + if (ret) { + dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__, + ret); goto out_cooling_unregister; + } + + policy->cpuinfo.transition_latency = transition_latency; return 0; -- 2.0.0.rc2