[U-Boot] [GIT PULL] Please pull u-boot-mmc master

[Jaehoon Chung <jh80.chung@samsung.com>]

On 01/15/2018 10:53 PM, Tom Rini wrote:
> On Mon, Jan 15, 2018 at 11:35:05AM +0900, Jaehoon Chung wrote:
> 
>> Dear Tom,
>>
>> Could you pull these patches to u-boot/master?
>> Main topic is the support for HS200/UHS mode. 
>> If there are any problem, let me know. After applying to u-boot/master, will apply the other patches.
>>
>> The following changes since commit f3dd87e0b98999a78e500e8c6d2b063ebadf535a:
>>
>>   Prepare v2018.01 (2018-01-08 20:25:29 -0500)
>>
>> are available in the Git repository at:
>>
>>   git://git.denx.de/u-boot-mmc.git master
>>
>> for you to fetch changes up to db359efd5907edbeaea2e3eb3504729f60208cd8:
>>
>>   mmc: fsl_esdhc: Fix eMMC 1.8v setting issue (2018-01-13 00:08:44 +0900)
>>
> 
> Applied to u-boot/master, thanks!

Thanks!

> 
> But please note the following issues from checkpatch that need to be
> looked into and possibly followed up on:

I have also checked from checkpatch.pl..Will fix the something to check.

Best Regards,
Jaehoon Chung

> CHECK: Macro argument reuse 'mwt' - possible side-effects?
> #180: FILE: drivers/mmc/mmc.c:1245:
> +#define for_each_sd_mode_by_pref(caps, mwt) \
> +	for (mwt = sd_modes_by_pref;\
> +	     mwt < sd_modes_by_pref + ARRAY_SIZE(sd_modes_by_pref);\
> +	     mwt++) \
> +		if (caps & MMC_CAP(mwt->mode))
> 
> total: 0 errors, 0 warnings, 1 checks, 265 lines checked
> CHECK: Macro argument reuse 'mwt' - possible side-effects?
> #159: FILE: drivers/mmc/mmc.c:1382:
> +#define for_each_mmc_mode_by_pref(caps, mwt) \
> +	for (mwt = mmc_modes_by_pref;\
> +	    mwt < mmc_modes_by_pref + ARRAY_SIZE(mmc_modes_by_pref);\
> +	    mwt++) \
> +		if (caps & MMC_CAP(mwt->mode))
> 
> CHECK: Macro argument reuse 'ecbv' - possible side-effects?
> #177: FILE: drivers/mmc/mmc.c:1400:
> +#define for_each_supported_width(caps, ddr, ecbv) \
> +	for (ecbv = ext_csd_bus_width;\
> +	    ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\
> +	    ecbv++) \
> +		if ((ddr == ecbv->is_ddr) && (caps & ecbv->cap))
> 
> CHECK: Alignment should match open parenthesis
> #253: FILE: drivers/mmc/mmc.c:1437:
> +			err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
> +				    EXT_CSD_BUS_WIDTH,
> 
> WARNING: 'occured' may be misspelled - perhaps 'occurred'?
> #292: FILE: drivers/mmc/mmc.c:1469:
> +			/* if an error occured, revert to a safer bus mode */
> 
> total: 0 errors, 1 warnings, 3 checks, 320 lines checked
> WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
> #7: 
> function ignore this. Modify mmc_set_ios() and the callers of mmc_set_ios() to
> 
> total: 0 errors, 1 warnings, 0 checks, 46 lines checked
> WARNING: ENOSYS means 'invalid syscall nr' and nothing else
> #30: FILE: drivers/mmc/mmc-uclass.c:100:
> +		return -ENOSYS;
> 
> total: 0 errors, 1 warnings, 0 checks, 60 lines checked
> WARNING: 'capabilites' may be misspelled - perhaps 'capabilities'?
> #6: 
> Add UHS modes to the list of supported modes, get the UHS capabilites of
> 
> total: 0 errors, 5 warnings, 0 checks, 381 lines checked
> WARNING: line over 80 characters
> #59: FILE: drivers/mmc/mmc.c:2217:
> +		debug("Unable to do a full power cycle. Disabling the UHS modes for safety\n");
> 
> total: 0 errors, 1 warnings, 0 checks, 50 lines checked
> WARNING: 'optionnal' may be misspelled - perhaps 'optional'?
> #13: 
> To make it clear that those are optionnal workarounds, a new Kconfig
> 
> total: 0 errors, 1 warnings, 0 checks, 102 lines checked
> WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
> #6: 
> The SDcard initialization procedure does a few more things than it did earlier:
> 
> total: 0 errors, 1 warnings, 0 checks, 13 lines checked
> WARNING: please write a paragraph that describes the config symbol fully
> #50: FILE: common/spl/Kconfig:419:
> +config SPL_MMC_WRITE
> 
> WARNING: please write a paragraph that describes the config symbol fully
> #69: FILE: drivers/mmc/Kconfig:13:
> +config MMC_WRITE
> 
> total: 0 errors, 2 warnings, 0 checks, 82 lines checked
> CHECK: Unbalanced braces around else statement
> #85: FILE: drivers/mmc/mmc.c:2089:
> +	else {
> 
> total: 0 errors, 0 warnings, 1 checks, 116 lines checked
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #35: 
> new file mode 100644
> 
> total: 0 errors, 1 warnings, 0 checks, 403 lines checked
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #27: 
> new file mode 100644
>