All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: mjr@cs.wisc.edu
Cc: fbl@redhat.com, davem@davemloft.net, ben@simtec.co.uk,
	netdev@vger.kernel.org
Subject: Re: [PATCH] ks8851: Fix missing mutex_lock/unlock
Date: Thu, 12 Apr 2012 13:34:32 -0700	[thread overview]
Message-ID: <4F873C58.3000104@codeaurora.org> (raw)
In-Reply-To: <1334261204-8554-1-git-send-email-mjr@cs.wisc.edu>

On 04/12/12 13:06, mjr@cs.wisc.edu wrote:
> From: Matt Renzelmann <mjr@cs.wisc.edu>
>
> All calls to ks8851_rdreg* and ks8851_wrreg* should be protected with
> the driver's lock mutex.  A spurious interrupt may otherwise cause a
> crash.
>
> Signed-off-by: Matt Renzelmann <mjr@cs.wisc.edu>
> ---
>
> Thank you, Mr. Leitner, for providing feedback.  I agree with your
> changes and have updated the patch to reflect them.  I apologize for
> missing the driver name in the title -- I've updated the patch with
> that information as well.  Please let me know if there is anything
> else I should fix/change.
>
>  drivers/net/ethernet/micrel/ks8851.c |    8 ++++++--
>  1 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
> index c722aa6..20237dc 100644
> --- a/drivers/net/ethernet/micrel/ks8851.c
> +++ b/drivers/net/ethernet/micrel/ks8851.c
> @@ -1417,6 +1417,7 @@ static int __devinit ks8851_probe(struct spi_device *spi)
>  {
>  	struct net_device *ndev;
>  	struct ks8851_net *ks;
> +	int result;
>  	int ret;
>  
>  	ndev = alloc_etherdev(sizeof(struct ks8851_net));
> @@ -1515,9 +1516,12 @@ static int __devinit ks8851_probe(struct spi_device *spi)
>  		goto err_netdev;
>  	}
>  
> +	mutex_lock(&ks->lock);
> +	result = CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER));
> +	mutex_unlock(&ks->lock);
> +
>  	netdev_info(ndev, "revision %d, MAC %pM, IRQ %d, %s EEPROM\n",
> -		    CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)),
> -		    ndev->dev_addr, ndev->irq,
> +		    result, ndev->dev_addr, ndev->irq,
>  		    ks->rc_ccr & CCR_EEPROM ? "has" : "no");
>  
>  	return 0;

This register is already read in the probe function and the lock is not
held there so you seem to have missed a couple. I would guess it doesn't
really matter tha we don't grab the lock though because the device isn't
actively sending/receiving packets. How about this instead?

diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index c722aa60..6f21fcd 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -1418,6 +1418,7 @@ static int __devinit ks8851_probe(struct spi_device *spi)
        struct net_device *ndev;
        struct ks8851_net *ks;
        int ret;
+       unsigned cider;
 
        ndev = alloc_etherdev(sizeof(struct ks8851_net));
        if (!ndev)
@@ -1484,8 +1485,9 @@ static int __devinit ks8851_probe(struct spi_device *spi)
        ks8851_soft_reset(ks, GRR_GSR);
 
        /* simple check for a valid chip being connected to the bus */
-
-       if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+       mutex_lock(&ks->lock);
+       cider = ks8851_rdreg16(ks, KS_CIDER);
+       if ((cider & ~CIDER_REV_MASK) != CIDER_ID) {
                dev_err(&spi->dev, "failed to read device ID\n");
                ret = -ENODEV;
                goto err_id;
@@ -1493,6 +1495,7 @@ static int __devinit ks8851_probe(struct spi_device *spi)
 
        /* cache the contents of the CCR register for EEPROM, etc. */
        ks->rc_ccr = ks8851_rdreg16(ks, KS_CCR);
+       mutex_unlock(&ks->lock);
 
        if (ks->rc_ccr & CCR_EEPROM)
                ks->eeprom_size = 128;
@@ -1516,8 +1519,7 @@ static int __devinit ks8851_probe(struct spi_device *spi)
        }
 
        netdev_info(ndev, "revision %d, MAC %pM, IRQ %d, %s EEPROM\n",
-                   CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)),
-                   ndev->dev_addr, ndev->irq,
+                   CIDER_REV_GET(cider), ndev->dev_addr, ndev->irq,
                    ks->rc_ccr & CCR_EEPROM ? "has" : "no");
 
        return 0;


-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

  reply	other threads:[~2012-04-12 20:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-12 20:06 [PATCH] ks8851: Fix missing mutex_lock/unlock mjr
2012-04-12 20:34 ` Stephen Boyd [this message]
2012-04-12 20:56   ` Matt Renzelmann
2012-04-12 20:59   ` Flavio Leitner
2012-04-12 21:19     ` Flavio Leitner
2012-04-12 20:40 ` Flavio Leitner
2012-04-12 21:28 mjr
2012-04-12 22:03 ` Ben Hutchings
2012-04-12 23:15 mjr
2012-04-13  0:22 ` Flavio Leitner
2012-04-13 17:46 ` Stephen Boyd
2012-04-13 17:59 mjr
2012-04-13 18:05 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F873C58.3000104@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=ben@simtec.co.uk \
    --cc=davem@davemloft.net \
    --cc=fbl@redhat.com \
    --cc=mjr@cs.wisc.edu \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.