From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1423092AbbEONf5 (ORCPT ); Fri, 15 May 2015 09:35:57 -0400 Received: from mail-wi0-f181.google.com ([209.85.212.181]:38313 "EHLO mail-wi0-f181.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1422736AbbEONfw (ORCPT ); Fri, 15 May 2015 09:35:52 -0400 Message-ID: <5555F632.1050309@linaro.org> Date: Fri, 15 May 2015 15:35:46 +0200 From: Eric Auger User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.6.0 MIME-Version: 1.0 To: Alex Williamson CC: eric.auger@st.com, christoffer.dall@linaro.org, linux-arm-kernel@lists.infradead.org, kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org, b.reynal@virtualopensystems.com, linux-kernel@vger.kernel.org, patches@linaro.org, agraf@suse.de, Bharat.Bhushan@freescale.com Subject: Re: [PATCH 5/5] VFIO: platform: VFIO platform Calxeda xgmac reset module References: <1431008843-28411-1-git-send-email-eric.auger@linaro.org> <1431008843-28411-6-git-send-email-eric.auger@linaro.org> <1431542017.3625.56.camel@redhat.com> <5554659E.3010205@linaro.org> <1431616452.3625.107.camel@redhat.com> In-Reply-To: <1431616452.3625.107.camel@redhat.com> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 05/14/2015 05:14 PM, Alex Williamson wrote: > On Thu, 2015-05-14 at 11:06 +0200, Eric Auger wrote: >> Alex, >> On 05/13/2015 08:33 PM, Alex Williamson wrote: >>> On Thu, 2015-05-07 at 16:27 +0200, Eric Auger wrote: >>>> This patch introduces a module that registers and implements a basic >>>> reset function for the Calxeda xgmac device. This latter basically disables >>>> interrupts and stops DMA transfers. >>>> >>>> The reset function code is inherited from the native calxeda xgmac driver. >>>> >>>> Signed-off-by: Eric Auger >>>> --- >>>> drivers/vfio/platform/Kconfig | 2 + >>>> drivers/vfio/platform/Makefile | 2 + >>>> drivers/vfio/platform/reset/Kconfig | 7 ++ >>>> drivers/vfio/platform/reset/Makefile | 5 + >>>> .../platform/reset/vfio_platform_calxedaxgmac.c | 121 +++++++++++++++++++++ >>>> 5 files changed, 137 insertions(+) >>>> create mode 100644 drivers/vfio/platform/reset/Kconfig >>>> create mode 100644 drivers/vfio/platform/reset/Makefile >>>> create mode 100644 drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c >>>> >>>> diff --git a/drivers/vfio/platform/Kconfig b/drivers/vfio/platform/Kconfig >>>> index 9a4403e..1df7477 100644 >>>> --- a/drivers/vfio/platform/Kconfig >>>> +++ b/drivers/vfio/platform/Kconfig >>>> @@ -18,3 +18,5 @@ config VFIO_AMBA >>>> framework. >>>> >>>> If you don't know what to do here, say N. >>>> + >>>> +source "drivers/vfio/platform/reset/Kconfig" >>>> diff --git a/drivers/vfio/platform/Makefile b/drivers/vfio/platform/Makefile >>>> index 81de144..9ce8afe 100644 >>>> --- a/drivers/vfio/platform/Makefile >>>> +++ b/drivers/vfio/platform/Makefile >>>> @@ -2,7 +2,9 @@ >>>> vfio-platform-y := vfio_platform.o vfio_platform_common.o vfio_platform_irq.o >>>> >>>> obj-$(CONFIG_VFIO_PLATFORM) += vfio-platform.o >>>> +obj-$(CONFIG_VFIO_PLATFORM) += reset/ >>>> >>>> vfio-amba-y := vfio_amba.o >>>> >>>> obj-$(CONFIG_VFIO_AMBA) += vfio-amba.o >>>> +obj-$(CONFIG_VFIO_AMBA) += reset/ >>>> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig >>>> new file mode 100644 >>>> index 0000000..746b96b >>>> --- /dev/null >>>> +++ b/drivers/vfio/platform/reset/Kconfig >>>> @@ -0,0 +1,7 @@ >>>> +config VFIO_PLATFORM_CALXEDAXGMAC_RESET >>>> + tristate "VFIO support for calxeda xgmac reset" >>>> + depends on VFIO_PLATFORM >>>> + help >>>> + Enables the VFIO platform driver to handle reset for Calxeda xgmac >>>> + >>>> + If you don't know what to do here, say N. >>>> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile >>>> new file mode 100644 >>>> index 0000000..2a486af >>>> --- /dev/null >>>> +++ b/drivers/vfio/platform/reset/Makefile >>>> @@ -0,0 +1,5 @@ >>>> +vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o >>>> + >>>> +ccflags-y += -Idrivers/vfio/platform >>>> + >>>> +obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o >>>> diff --git a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c >>>> new file mode 100644 >>>> index 0000000..3c6e428 >>>> --- /dev/null >>>> +++ b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c >>>> @@ -0,0 +1,121 @@ >>>> +/* >>>> + * VFIO platform driver specialized for Calxeda xgmac reset >>>> + * reset code is inherited from calxeda xgmac native driver >>>> + * >>>> + * Copyright 2010-2011 Calxeda, Inc. >>>> + * Copyright (c) 2015 Linaro Ltd. >>>> + * www.linaro.org >>>> + * >>>> + * This program is free software; you can redistribute it and/or modify it >>>> + * under the terms and conditions of the GNU General Public License, >>>> + * version 2, as published by the Free Software Foundation. >>>> + * >>>> + * This program is distributed in the hope it will be useful, but WITHOUT >>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >>>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >>>> + * more details. >>>> + * >>>> + * You should have received a copy of the GNU General Public License along with >>>> + * this program. If not, see . >>>> + */ >>>> + >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> + >>>> +#include "vfio_platform_private.h" >>>> + >>>> +#define DRIVER_VERSION "0.1" >>>> +#define DRIVER_AUTHOR "Eric Auger " >>>> +#define DRIVER_DESC "Reset support for Calxeda xgmac vfio platform device" >>>> + >>>> +#define CALXEDAXGMAC_COMPAT "calxeda,hb-xgmac" >>>> + >>>> +/* XGMAC Register definitions */ >>>> +#define XGMAC_CONTROL 0x00000000 /* MAC Configuration */ >>>> + >>>> +/* DMA Control and Status Registers */ >>>> +#define XGMAC_DMA_CONTROL 0x00000f18 /* Ctrl (Operational Mode) */ >>>> +#define XGMAC_DMA_INTR_ENA 0x00000f1c /* Interrupt Enable */ >>>> + >>>> +/* DMA Control registe defines */ >>>> +#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */ >>>> +#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */ >>>> + >>>> +/* Common MAC defines */ >>>> +#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */ >>>> +#define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */ >>>> + >>>> +static inline void xgmac_mac_disable(void __iomem *ioaddr) >>>> +{ >>>> + u32 value = readl(ioaddr + XGMAC_DMA_CONTROL); >>>> + >>>> + value &= ~(DMA_CONTROL_ST | DMA_CONTROL_SR); >>>> + writel(value, ioaddr + XGMAC_DMA_CONTROL); >>>> + >>>> + value = readl(ioaddr + XGMAC_CONTROL); >>>> + value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX); >>>> + writel(value, ioaddr + XGMAC_CONTROL); >>>> +} >>>> + >>>> +int vfio_platform_calxedaxgmac_reset(struct vfio_platform_device *vdev) >>>> +{ >>>> + struct vfio_platform_region reg = vdev->regions[0]; >>>> + >>>> + if (!reg.ioaddr) { >>>> + reg.ioaddr = >>>> + ioremap_nocache(reg.addr, reg.size); >>>> + if (!reg.ioaddr) >>>> + return -ENOMEM; >>>> + } >>>> + >>>> + /* disable IRQ */ >>>> + writel(0, reg.ioaddr + XGMAC_DMA_INTR_ENA); >>>> + >>>> + /* Disable the MAC core */ >>>> + xgmac_mac_disable(reg.ioaddr); >>>> + >>>> + return 0; >>>> +} >>>> +EXPORT_SYMBOL_GPL(vfio_platform_calxedaxgmac_reset); >>>> + >>>> +static int __init vfio_platform_calxedaxgmac_init(void) >>>> +{ >>>> + int (*register_reset)(char *, struct module *, >>>> + vfio_platform_reset_fn_t); >>>> + int ret; >>>> + >>>> + register_reset = symbol_get(vfio_platform_register_reset); >>>> + if (!register_reset) >>>> + return -EINVAL; >>>> + >>>> + ret = register_reset(CALXEDAXGMAC_COMPAT, THIS_MODULE, >>>> + vfio_platform_calxedaxgmac_reset); >>>> + >>>> + symbol_put(vfio_platform_register_reset); >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +static void __exit vfio_platform_calxedaxgmac_exit(void) >>>> +{ >>>> + int (*unregister_reset)(char *); >>>> + int ret; >>>> + >>>> + unregister_reset = symbol_get(vfio_platform_unregister_reset); >>> >>> Shouldn't we have gotten the symbol during the module init so that this >>> cannot fail? >> yes makes sense >>> >>>> + if (!unregister_reset) >>>> + return; >>>> + >>>> + ret = unregister_reset(CALXEDAXGMAC_COMPAT); >>> >>> unregister_reset() should just return void >> ok >>> >>>> + >>>> + symbol_put(vfio_platform_unregister_reset); >>>> +} >>>> + >>>> +module_init(vfio_platform_calxedaxgmac_init); >>>> +module_exit(vfio_platform_calxedaxgmac_exit); >>>> + >>>> +MODULE_VERSION(DRIVER_VERSION); >>>> +MODULE_LICENSE("GPL v2"); >>>> +MODULE_AUTHOR(DRIVER_AUTHOR); >>>> +MODULE_DESCRIPTION(DRIVER_DESC); >>> >>> >>> So a user needs to manually load this module to get a working reset for >>> this device? That's never going to happen. >> The reset module is devised to be in-kernel or external. There is always >> the choice to include all reset modules as soon as vfio-platform /amba >> is chosen. What would be your preferred approach then? Do you consider >> this approach using separate reset modules is not sensible? Do you think >> we should put everything in the vfio-platform driver? > > I respect your attempt to keep the code slim and modular by making the > reset functionality loadable, but we can't expect users to figure out > what module they need to load to make their device work. It needs to be > automatic. One way we could achieve that and still keep your premise of > loadable reset modules would be a lookup table in vfio-platform to > translate a device compatibility ID to a reset module name. We could > then do a request_module() to auto-load the reset module if one exists. > Maybe the ID table could even live in the reset driver, much like PCI > IDs live in those drivers. We also have the complication that there's > no direct module dependency for the reset module(s), so they would need > to be explicitly listed to install them into an initramfs. > > If we take that approach, we're quickly building infrastructure that > gets more bloated than a few reset functions buried directly into > vfio-platform. Then we may wonder how many reset functions are we > reasonably going to get. If you don't have more than a couple in mind, > maybe we should just embed them into vfio-platform and worry about > creating something more dynamic when the need presents itself. Thanks, Hi Alex, I will explore the approach you described above, based on request_module(). Logically the number of reset functions should grow rapidly as vfio-platform drivers get used. Thanks for exchanging on this! Best Regards Eric > > Alex > From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Auger Subject: Re: [PATCH 5/5] VFIO: platform: VFIO platform Calxeda xgmac reset module Date: Fri, 15 May 2015 15:35:46 +0200 Message-ID: <5555F632.1050309@linaro.org> References: <1431008843-28411-1-git-send-email-eric.auger@linaro.org> <1431008843-28411-6-git-send-email-eric.auger@linaro.org> <1431542017.3625.56.camel@redhat.com> <5554659E.3010205@linaro.org> <1431616452.3625.107.camel@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: kvm@vger.kernel.org, patches@linaro.org, linux-kernel@vger.kernel.org, eric.auger@st.com, kvmarm@lists.cs.columbia.edu, linux-arm-kernel@lists.infradead.org To: Alex Williamson Return-path: In-Reply-To: <1431616452.3625.107.camel@redhat.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: kvmarm-bounces@lists.cs.columbia.edu Sender: kvmarm-bounces@lists.cs.columbia.edu List-Id: kvm.vger.kernel.org On 05/14/2015 05:14 PM, Alex Williamson wrote: > On Thu, 2015-05-14 at 11:06 +0200, Eric Auger wrote: >> Alex, >> On 05/13/2015 08:33 PM, Alex Williamson wrote: >>> On Thu, 2015-05-07 at 16:27 +0200, Eric Auger wrote: >>>> This patch introduces a module that registers and implements a basic >>>> reset function for the Calxeda xgmac device. This latter basically disables >>>> interrupts and stops DMA transfers. >>>> >>>> The reset function code is inherited from the native calxeda xgmac driver. >>>> >>>> Signed-off-by: Eric Auger >>>> --- >>>> drivers/vfio/platform/Kconfig | 2 + >>>> drivers/vfio/platform/Makefile | 2 + >>>> drivers/vfio/platform/reset/Kconfig | 7 ++ >>>> drivers/vfio/platform/reset/Makefile | 5 + >>>> .../platform/reset/vfio_platform_calxedaxgmac.c | 121 +++++++++++++++++++++ >>>> 5 files changed, 137 insertions(+) >>>> create mode 100644 drivers/vfio/platform/reset/Kconfig >>>> create mode 100644 drivers/vfio/platform/reset/Makefile >>>> create mode 100644 drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c >>>> >>>> diff --git a/drivers/vfio/platform/Kconfig b/drivers/vfio/platform/Kconfig >>>> index 9a4403e..1df7477 100644 >>>> --- a/drivers/vfio/platform/Kconfig >>>> +++ b/drivers/vfio/platform/Kconfig >>>> @@ -18,3 +18,5 @@ config VFIO_AMBA >>>> framework. >>>> >>>> If you don't know what to do here, say N. >>>> + >>>> +source "drivers/vfio/platform/reset/Kconfig" >>>> diff --git a/drivers/vfio/platform/Makefile b/drivers/vfio/platform/Makefile >>>> index 81de144..9ce8afe 100644 >>>> --- a/drivers/vfio/platform/Makefile >>>> +++ b/drivers/vfio/platform/Makefile >>>> @@ -2,7 +2,9 @@ >>>> vfio-platform-y := vfio_platform.o vfio_platform_common.o vfio_platform_irq.o >>>> >>>> obj-$(CONFIG_VFIO_PLATFORM) += vfio-platform.o >>>> +obj-$(CONFIG_VFIO_PLATFORM) += reset/ >>>> >>>> vfio-amba-y := vfio_amba.o >>>> >>>> obj-$(CONFIG_VFIO_AMBA) += vfio-amba.o >>>> +obj-$(CONFIG_VFIO_AMBA) += reset/ >>>> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig >>>> new file mode 100644 >>>> index 0000000..746b96b >>>> --- /dev/null >>>> +++ b/drivers/vfio/platform/reset/Kconfig >>>> @@ -0,0 +1,7 @@ >>>> +config VFIO_PLATFORM_CALXEDAXGMAC_RESET >>>> + tristate "VFIO support for calxeda xgmac reset" >>>> + depends on VFIO_PLATFORM >>>> + help >>>> + Enables the VFIO platform driver to handle reset for Calxeda xgmac >>>> + >>>> + If you don't know what to do here, say N. >>>> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile >>>> new file mode 100644 >>>> index 0000000..2a486af >>>> --- /dev/null >>>> +++ b/drivers/vfio/platform/reset/Makefile >>>> @@ -0,0 +1,5 @@ >>>> +vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o >>>> + >>>> +ccflags-y += -Idrivers/vfio/platform >>>> + >>>> +obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o >>>> diff --git a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c >>>> new file mode 100644 >>>> index 0000000..3c6e428 >>>> --- /dev/null >>>> +++ b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c >>>> @@ -0,0 +1,121 @@ >>>> +/* >>>> + * VFIO platform driver specialized for Calxeda xgmac reset >>>> + * reset code is inherited from calxeda xgmac native driver >>>> + * >>>> + * Copyright 2010-2011 Calxeda, Inc. >>>> + * Copyright (c) 2015 Linaro Ltd. >>>> + * www.linaro.org >>>> + * >>>> + * This program is free software; you can redistribute it and/or modify it >>>> + * under the terms and conditions of the GNU General Public License, >>>> + * version 2, as published by the Free Software Foundation. >>>> + * >>>> + * This program is distributed in the hope it will be useful, but WITHOUT >>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >>>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >>>> + * more details. >>>> + * >>>> + * You should have received a copy of the GNU General Public License along with >>>> + * this program. If not, see . >>>> + */ >>>> + >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> + >>>> +#include "vfio_platform_private.h" >>>> + >>>> +#define DRIVER_VERSION "0.1" >>>> +#define DRIVER_AUTHOR "Eric Auger " >>>> +#define DRIVER_DESC "Reset support for Calxeda xgmac vfio platform device" >>>> + >>>> +#define CALXEDAXGMAC_COMPAT "calxeda,hb-xgmac" >>>> + >>>> +/* XGMAC Register definitions */ >>>> +#define XGMAC_CONTROL 0x00000000 /* MAC Configuration */ >>>> + >>>> +/* DMA Control and Status Registers */ >>>> +#define XGMAC_DMA_CONTROL 0x00000f18 /* Ctrl (Operational Mode) */ >>>> +#define XGMAC_DMA_INTR_ENA 0x00000f1c /* Interrupt Enable */ >>>> + >>>> +/* DMA Control registe defines */ >>>> +#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */ >>>> +#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */ >>>> + >>>> +/* Common MAC defines */ >>>> +#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */ >>>> +#define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */ >>>> + >>>> +static inline void xgmac_mac_disable(void __iomem *ioaddr) >>>> +{ >>>> + u32 value = readl(ioaddr + XGMAC_DMA_CONTROL); >>>> + >>>> + value &= ~(DMA_CONTROL_ST | DMA_CONTROL_SR); >>>> + writel(value, ioaddr + XGMAC_DMA_CONTROL); >>>> + >>>> + value = readl(ioaddr + XGMAC_CONTROL); >>>> + value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX); >>>> + writel(value, ioaddr + XGMAC_CONTROL); >>>> +} >>>> + >>>> +int vfio_platform_calxedaxgmac_reset(struct vfio_platform_device *vdev) >>>> +{ >>>> + struct vfio_platform_region reg = vdev->regions[0]; >>>> + >>>> + if (!reg.ioaddr) { >>>> + reg.ioaddr = >>>> + ioremap_nocache(reg.addr, reg.size); >>>> + if (!reg.ioaddr) >>>> + return -ENOMEM; >>>> + } >>>> + >>>> + /* disable IRQ */ >>>> + writel(0, reg.ioaddr + XGMAC_DMA_INTR_ENA); >>>> + >>>> + /* Disable the MAC core */ >>>> + xgmac_mac_disable(reg.ioaddr); >>>> + >>>> + return 0; >>>> +} >>>> +EXPORT_SYMBOL_GPL(vfio_platform_calxedaxgmac_reset); >>>> + >>>> +static int __init vfio_platform_calxedaxgmac_init(void) >>>> +{ >>>> + int (*register_reset)(char *, struct module *, >>>> + vfio_platform_reset_fn_t); >>>> + int ret; >>>> + >>>> + register_reset = symbol_get(vfio_platform_register_reset); >>>> + if (!register_reset) >>>> + return -EINVAL; >>>> + >>>> + ret = register_reset(CALXEDAXGMAC_COMPAT, THIS_MODULE, >>>> + vfio_platform_calxedaxgmac_reset); >>>> + >>>> + symbol_put(vfio_platform_register_reset); >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +static void __exit vfio_platform_calxedaxgmac_exit(void) >>>> +{ >>>> + int (*unregister_reset)(char *); >>>> + int ret; >>>> + >>>> + unregister_reset = symbol_get(vfio_platform_unregister_reset); >>> >>> Shouldn't we have gotten the symbol during the module init so that this >>> cannot fail? >> yes makes sense >>> >>>> + if (!unregister_reset) >>>> + return; >>>> + >>>> + ret = unregister_reset(CALXEDAXGMAC_COMPAT); >>> >>> unregister_reset() should just return void >> ok >>> >>>> + >>>> + symbol_put(vfio_platform_unregister_reset); >>>> +} >>>> + >>>> +module_init(vfio_platform_calxedaxgmac_init); >>>> +module_exit(vfio_platform_calxedaxgmac_exit); >>>> + >>>> +MODULE_VERSION(DRIVER_VERSION); >>>> +MODULE_LICENSE("GPL v2"); >>>> +MODULE_AUTHOR(DRIVER_AUTHOR); >>>> +MODULE_DESCRIPTION(DRIVER_DESC); >>> >>> >>> So a user needs to manually load this module to get a working reset for >>> this device? That's never going to happen. >> The reset module is devised to be in-kernel or external. There is always >> the choice to include all reset modules as soon as vfio-platform /amba >> is chosen. What would be your preferred approach then? Do you consider >> this approach using separate reset modules is not sensible? Do you think >> we should put everything in the vfio-platform driver? > > I respect your attempt to keep the code slim and modular by making the > reset functionality loadable, but we can't expect users to figure out > what module they need to load to make their device work. It needs to be > automatic. One way we could achieve that and still keep your premise of > loadable reset modules would be a lookup table in vfio-platform to > translate a device compatibility ID to a reset module name. We could > then do a request_module() to auto-load the reset module if one exists. > Maybe the ID table could even live in the reset driver, much like PCI > IDs live in those drivers. We also have the complication that there's > no direct module dependency for the reset module(s), so they would need > to be explicitly listed to install them into an initramfs. > > If we take that approach, we're quickly building infrastructure that > gets more bloated than a few reset functions buried directly into > vfio-platform. Then we may wonder how many reset functions are we > reasonably going to get. If you don't have more than a couple in mind, > maybe we should just embed them into vfio-platform and worry about > creating something more dynamic when the need presents itself. Thanks, Hi Alex, I will explore the approach you described above, based on request_module(). Logically the number of reset functions should grow rapidly as vfio-platform drivers get used. Thanks for exchanging on this! Best Regards Eric > > Alex > From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric.auger@linaro.org (Eric Auger) Date: Fri, 15 May 2015 15:35:46 +0200 Subject: [PATCH 5/5] VFIO: platform: VFIO platform Calxeda xgmac reset module In-Reply-To: <1431616452.3625.107.camel@redhat.com> References: <1431008843-28411-1-git-send-email-eric.auger@linaro.org> <1431008843-28411-6-git-send-email-eric.auger@linaro.org> <1431542017.3625.56.camel@redhat.com> <5554659E.3010205@linaro.org> <1431616452.3625.107.camel@redhat.com> Message-ID: <5555F632.1050309@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 05/14/2015 05:14 PM, Alex Williamson wrote: > On Thu, 2015-05-14 at 11:06 +0200, Eric Auger wrote: >> Alex, >> On 05/13/2015 08:33 PM, Alex Williamson wrote: >>> On Thu, 2015-05-07 at 16:27 +0200, Eric Auger wrote: >>>> This patch introduces a module that registers and implements a basic >>>> reset function for the Calxeda xgmac device. This latter basically disables >>>> interrupts and stops DMA transfers. >>>> >>>> The reset function code is inherited from the native calxeda xgmac driver. >>>> >>>> Signed-off-by: Eric Auger >>>> --- >>>> drivers/vfio/platform/Kconfig | 2 + >>>> drivers/vfio/platform/Makefile | 2 + >>>> drivers/vfio/platform/reset/Kconfig | 7 ++ >>>> drivers/vfio/platform/reset/Makefile | 5 + >>>> .../platform/reset/vfio_platform_calxedaxgmac.c | 121 +++++++++++++++++++++ >>>> 5 files changed, 137 insertions(+) >>>> create mode 100644 drivers/vfio/platform/reset/Kconfig >>>> create mode 100644 drivers/vfio/platform/reset/Makefile >>>> create mode 100644 drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c >>>> >>>> diff --git a/drivers/vfio/platform/Kconfig b/drivers/vfio/platform/Kconfig >>>> index 9a4403e..1df7477 100644 >>>> --- a/drivers/vfio/platform/Kconfig >>>> +++ b/drivers/vfio/platform/Kconfig >>>> @@ -18,3 +18,5 @@ config VFIO_AMBA >>>> framework. >>>> >>>> If you don't know what to do here, say N. >>>> + >>>> +source "drivers/vfio/platform/reset/Kconfig" >>>> diff --git a/drivers/vfio/platform/Makefile b/drivers/vfio/platform/Makefile >>>> index 81de144..9ce8afe 100644 >>>> --- a/drivers/vfio/platform/Makefile >>>> +++ b/drivers/vfio/platform/Makefile >>>> @@ -2,7 +2,9 @@ >>>> vfio-platform-y := vfio_platform.o vfio_platform_common.o vfio_platform_irq.o >>>> >>>> obj-$(CONFIG_VFIO_PLATFORM) += vfio-platform.o >>>> +obj-$(CONFIG_VFIO_PLATFORM) += reset/ >>>> >>>> vfio-amba-y := vfio_amba.o >>>> >>>> obj-$(CONFIG_VFIO_AMBA) += vfio-amba.o >>>> +obj-$(CONFIG_VFIO_AMBA) += reset/ >>>> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig >>>> new file mode 100644 >>>> index 0000000..746b96b >>>> --- /dev/null >>>> +++ b/drivers/vfio/platform/reset/Kconfig >>>> @@ -0,0 +1,7 @@ >>>> +config VFIO_PLATFORM_CALXEDAXGMAC_RESET >>>> + tristate "VFIO support for calxeda xgmac reset" >>>> + depends on VFIO_PLATFORM >>>> + help >>>> + Enables the VFIO platform driver to handle reset for Calxeda xgmac >>>> + >>>> + If you don't know what to do here, say N. >>>> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile >>>> new file mode 100644 >>>> index 0000000..2a486af >>>> --- /dev/null >>>> +++ b/drivers/vfio/platform/reset/Makefile >>>> @@ -0,0 +1,5 @@ >>>> +vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o >>>> + >>>> +ccflags-y += -Idrivers/vfio/platform >>>> + >>>> +obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o >>>> diff --git a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c >>>> new file mode 100644 >>>> index 0000000..3c6e428 >>>> --- /dev/null >>>> +++ b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c >>>> @@ -0,0 +1,121 @@ >>>> +/* >>>> + * VFIO platform driver specialized for Calxeda xgmac reset >>>> + * reset code is inherited from calxeda xgmac native driver >>>> + * >>>> + * Copyright 2010-2011 Calxeda, Inc. >>>> + * Copyright (c) 2015 Linaro Ltd. >>>> + * www.linaro.org >>>> + * >>>> + * This program is free software; you can redistribute it and/or modify it >>>> + * under the terms and conditions of the GNU General Public License, >>>> + * version 2, as published by the Free Software Foundation. >>>> + * >>>> + * This program is distributed in the hope it will be useful, but WITHOUT >>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >>>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >>>> + * more details. >>>> + * >>>> + * You should have received a copy of the GNU General Public License along with >>>> + * this program. If not, see . >>>> + */ >>>> + >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> + >>>> +#include "vfio_platform_private.h" >>>> + >>>> +#define DRIVER_VERSION "0.1" >>>> +#define DRIVER_AUTHOR "Eric Auger " >>>> +#define DRIVER_DESC "Reset support for Calxeda xgmac vfio platform device" >>>> + >>>> +#define CALXEDAXGMAC_COMPAT "calxeda,hb-xgmac" >>>> + >>>> +/* XGMAC Register definitions */ >>>> +#define XGMAC_CONTROL 0x00000000 /* MAC Configuration */ >>>> + >>>> +/* DMA Control and Status Registers */ >>>> +#define XGMAC_DMA_CONTROL 0x00000f18 /* Ctrl (Operational Mode) */ >>>> +#define XGMAC_DMA_INTR_ENA 0x00000f1c /* Interrupt Enable */ >>>> + >>>> +/* DMA Control registe defines */ >>>> +#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */ >>>> +#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */ >>>> + >>>> +/* Common MAC defines */ >>>> +#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */ >>>> +#define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */ >>>> + >>>> +static inline void xgmac_mac_disable(void __iomem *ioaddr) >>>> +{ >>>> + u32 value = readl(ioaddr + XGMAC_DMA_CONTROL); >>>> + >>>> + value &= ~(DMA_CONTROL_ST | DMA_CONTROL_SR); >>>> + writel(value, ioaddr + XGMAC_DMA_CONTROL); >>>> + >>>> + value = readl(ioaddr + XGMAC_CONTROL); >>>> + value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX); >>>> + writel(value, ioaddr + XGMAC_CONTROL); >>>> +} >>>> + >>>> +int vfio_platform_calxedaxgmac_reset(struct vfio_platform_device *vdev) >>>> +{ >>>> + struct vfio_platform_region reg = vdev->regions[0]; >>>> + >>>> + if (!reg.ioaddr) { >>>> + reg.ioaddr = >>>> + ioremap_nocache(reg.addr, reg.size); >>>> + if (!reg.ioaddr) >>>> + return -ENOMEM; >>>> + } >>>> + >>>> + /* disable IRQ */ >>>> + writel(0, reg.ioaddr + XGMAC_DMA_INTR_ENA); >>>> + >>>> + /* Disable the MAC core */ >>>> + xgmac_mac_disable(reg.ioaddr); >>>> + >>>> + return 0; >>>> +} >>>> +EXPORT_SYMBOL_GPL(vfio_platform_calxedaxgmac_reset); >>>> + >>>> +static int __init vfio_platform_calxedaxgmac_init(void) >>>> +{ >>>> + int (*register_reset)(char *, struct module *, >>>> + vfio_platform_reset_fn_t); >>>> + int ret; >>>> + >>>> + register_reset = symbol_get(vfio_platform_register_reset); >>>> + if (!register_reset) >>>> + return -EINVAL; >>>> + >>>> + ret = register_reset(CALXEDAXGMAC_COMPAT, THIS_MODULE, >>>> + vfio_platform_calxedaxgmac_reset); >>>> + >>>> + symbol_put(vfio_platform_register_reset); >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +static void __exit vfio_platform_calxedaxgmac_exit(void) >>>> +{ >>>> + int (*unregister_reset)(char *); >>>> + int ret; >>>> + >>>> + unregister_reset = symbol_get(vfio_platform_unregister_reset); >>> >>> Shouldn't we have gotten the symbol during the module init so that this >>> cannot fail? >> yes makes sense >>> >>>> + if (!unregister_reset) >>>> + return; >>>> + >>>> + ret = unregister_reset(CALXEDAXGMAC_COMPAT); >>> >>> unregister_reset() should just return void >> ok >>> >>>> + >>>> + symbol_put(vfio_platform_unregister_reset); >>>> +} >>>> + >>>> +module_init(vfio_platform_calxedaxgmac_init); >>>> +module_exit(vfio_platform_calxedaxgmac_exit); >>>> + >>>> +MODULE_VERSION(DRIVER_VERSION); >>>> +MODULE_LICENSE("GPL v2"); >>>> +MODULE_AUTHOR(DRIVER_AUTHOR); >>>> +MODULE_DESCRIPTION(DRIVER_DESC); >>> >>> >>> So a user needs to manually load this module to get a working reset for >>> this device? That's never going to happen. >> The reset module is devised to be in-kernel or external. There is always >> the choice to include all reset modules as soon as vfio-platform /amba >> is chosen. What would be your preferred approach then? Do you consider >> this approach using separate reset modules is not sensible? Do you think >> we should put everything in the vfio-platform driver? > > I respect your attempt to keep the code slim and modular by making the > reset functionality loadable, but we can't expect users to figure out > what module they need to load to make their device work. It needs to be > automatic. One way we could achieve that and still keep your premise of > loadable reset modules would be a lookup table in vfio-platform to > translate a device compatibility ID to a reset module name. We could > then do a request_module() to auto-load the reset module if one exists. > Maybe the ID table could even live in the reset driver, much like PCI > IDs live in those drivers. We also have the complication that there's > no direct module dependency for the reset module(s), so they would need > to be explicitly listed to install them into an initramfs. > > If we take that approach, we're quickly building infrastructure that > gets more bloated than a few reset functions buried directly into > vfio-platform. Then we may wonder how many reset functions are we > reasonably going to get. If you don't have more than a couple in mind, > maybe we should just embed them into vfio-platform and worry about > creating something more dynamic when the need presents itself. Thanks, Hi Alex, I will explore the approach you described above, based on request_module(). Logically the number of reset functions should grow rapidly as vfio-platform drivers get used. Thanks for exchanging on this! Best Regards Eric > > Alex >