From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8E113C433EF for ; Sat, 25 Sep 2021 13:52:59 +0000 (UTC) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 7F18461251 for ; Sat, 25 Sep 2021 13:52:58 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 7F18461251 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=xs4all.nl Authentication-Results: mail.kernel.org; spf=pass smtp.mailfrom=lists.denx.de Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 95BF683509; Sat, 25 Sep 2021 15:52:56 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=fail (p=none dis=none) header.from=xs4all.nl Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 1205D83509; Sat, 25 Sep 2021 15:52:55 +0200 (CEST) Received: from sibelius.xs4all.nl (sibelius.xs4all.nl [83.163.83.176]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id A01ED834D0 for ; Sat, 25 Sep 2021 15:52:50 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=fail (p=none dis=none) header.from=xs4all.nl Authentication-Results: phobos.denx.de; spf=fail smtp.mailfrom=mark.kettenis@xs4all.nl Received: from localhost (bloch.sibelius.xs4all.nl [local]) by bloch.sibelius.xs4all.nl (OpenSMTPD) with ESMTPA id 376192bd; Sat, 25 Sep 2021 15:52:39 +0200 (CEST) Date: Sat, 25 Sep 2021 15:52:39 +0200 (CEST) From: Mark Kettenis To: Simon Glass Cc: kettenis@openbsd.org, u-boot@lists.denx.de, oliver.graute@kococonnector.com, michael@walle.cc, anup.patel@wdc.com, jbalkind@ucsb.edu, tianrui-wei@outlook.com, padmarao.begari@microchip.com, kishon@ti.com, stephan@gerhold.net, xypron.glpk@gmx.de, bin.meng@windriver.com, ashe@kivikakk.ee, michal.simek@xilinx.com, wasim.khan@nxp.com, ye.li@nxp.com, igor.opaniuk@foundries.io, sr@denx.de, mk7.kang@samsung.com, takahiro.akashi@linaro.org, weijie.gao@mediatek.com, vabhav.sharma@nxp.com, andriy.shevchenko@linux.intel.com, p.yadav@ti.com In-Reply-To: (message from Simon Glass on Sat, 25 Sep 2021 07:27:41 -0600) Subject: Re: [PATCH 0/5] Apple M1 Support References: <20210918135437.36667-1-kettenis@openbsd.org> <5614837a43225d79@bloch.sibelius.xs4all.nl> Message-ID: <561484633aa0ee25@bloch.sibelius.xs4all.nl> X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.34 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.2 at phobos.denx.de X-Virus-Status: Clean > From: Simon Glass > Date: Sat, 25 Sep 2021 07:27:41 -0600 > > Hi Mark, > > On Sat, 25 Sept 2021 at 02:11, Mark Kettenis wrote: > > > > > From: Simon Glass > > > Date: Fri, 24 Sep 2021 19:20:32 -0600 > > > > > > Hi Mark, > > > > > > On Sat, 18 Sept 2021 at 07:54, Mark Kettenis wrote: > > > > > > > > This series adds basic support for Apple's M1 SoC to U-Boot. > > > > This builds a basic U-Boot that can be used as a payload > > > > for the m1n1 boot loader being developed by the Asahi Linux > > > > project. > > > > > > > > The goal here is to privide an UEFI interface on these machines that > > > > > > provide > > > > > > > allows booting various open source OSes. This initial series provides > > > > support for the serial port, framebuffer and the USB 3.1 Type-C ports. > > > > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk. > > > > > > > > Mark Kettenis (5): > > > > arm: apple: Add initial support for Apple's M1 SoC > > > > serial: s5p: Add Apple M1 support > > > > misc: Add Apple DART driver > > > > arm: dts: apple: Add preliminary device trees > > > > doc: board: apple: Add Apple M1 documentation > > > > > > > > arch/arm/Kconfig | 22 + > > > > arch/arm/Makefile | 1 + > > > > arch/arm/dts/t8103-j274.dts | 135 +++++ > > > > arch/arm/dts/t8103-j293.dts | 97 ++++ > > > > arch/arm/dts/t8103.dtsi | 506 ++++++++++++++++++ > > > > arch/arm/include/asm/arch-m1/clk.h | 11 + > > > > arch/arm/include/asm/arch-m1/uart.h | 41 ++ > > > > arch/arm/mach-apple/Kconfig | 18 + > > > > arch/arm/mach-apple/Makefile | 4 + > > > > arch/arm/mach-apple/board.c | 163 ++++++ > > > > arch/arm/mach-apple/lowlevel_init.S | 16 + > > > > configs/apple_m1_defconfig | 14 + > > > > doc/board/apple/index.rst | 9 + > > > > doc/board/apple/m1.rst | 54 ++ > > > > doc/board/index.rst | 1 + > > > > drivers/misc/Kconfig | 7 + > > > > drivers/misc/Makefile | 1 + > > > > drivers/misc/apple_dart.c | 171 ++++++ > > > > drivers/serial/Kconfig | 2 +- > > > > drivers/serial/serial_s5p.c | 22 + > > > > include/configs/apple.h | 38 ++ > > > > .../interrupt-controller/apple-aic.h | 15 + > > > > include/dt-bindings/pinctrl/apple.h | 13 + > > > > include/dt-bindings/spmi/spmi.h | 10 + > > > > 24 files changed, 1370 insertions(+), 1 deletion(-) > > > > create mode 100644 arch/arm/dts/t8103-j274.dts > > > > create mode 100644 arch/arm/dts/t8103-j293.dts > > > > create mode 100644 arch/arm/dts/t8103.dtsi > > > > create mode 100644 arch/arm/include/asm/arch-m1/clk.h > > > > create mode 100644 arch/arm/include/asm/arch-m1/uart.h > > > > create mode 100644 arch/arm/mach-apple/Kconfig > > > > create mode 100644 arch/arm/mach-apple/Makefile > > > > create mode 100644 arch/arm/mach-apple/board.c > > > > create mode 100644 arch/arm/mach-apple/lowlevel_init.S > > > > create mode 100644 configs/apple_m1_defconfig > > > > create mode 100644 doc/board/apple/index.rst > > > > create mode 100644 doc/board/apple/m1.rst > > > > create mode 100644 drivers/misc/apple_dart.c > > > > create mode 100644 include/configs/apple.h > > > > create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h > > > > create mode 100644 include/dt-bindings/pinctrl/apple.h > > > > create mode 100644 include/dt-bindings/spmi/spmi.h > > > > > > > > -- > > > > 2.33.0 > > > > > > > > > > I gave this a whirl on a Macbook Air A2337 and needed the patch below > > > to build the devicetree files. Sorry the formatting is broken. > > > > > > Also when booting I get this: > > > > > > ... > > > Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000 > > > Valid payload found > > > Preparing to run next stage at 0x808200000... > > > MMU: shutting down... > > > MMU: shutdown successful, clearing caches > > > > > > > > > Then the display clears and it hangs. If I try the J274 devicetree it > > > just reboots at that point. > > > > > > What should I expect? I was hoping for console output as I don't have > > > serial connected. I don't have a suitable serial cable, and the USB > > > gadget mode did not result in a ttyACM0 device appearing. > > > > For framebuffer support you also need the "30bpp framebuffer support" > > series I posted earlier: > > > > https://patchwork.ozlabs.org/project/uboot/list/?series=262617 > > > > With that your should get the usual U-Boot output on the screen. I've > > not tested the Air, but it should work there. > > Ah OK, yes that fixes it, thanks! > > So how do I get the keyboard to work in U-Boot? Or are you using > serial somehow? The laptop keyboard doesn't work yet, so I'm using a USB keyboard when I'm not using a serial console. You need the xhci-dwc3 diff I sent earlier for that: https://patchwork.ozlabs.org/project/uboot/patch/20210916140009.59009-1-kettenis@openbsd.org/ > Also it takes for ever to put a test version on the device...how are > you doing that for development? If you install m1n1.macho without a payload, you can then use the python scripts that come with m1n1 to upload kernels over serial. There is a USB gadget implementation in m1n1, so you don't need a real serial connection. Just connect a Linux machine to the M1 Mac using a USB cable and a USB serial device should show up on the Linux machine once m1n1 is running on the Mac. Set the M1N1DEVICE environment variable to the right device name and run: $ python3 linux.py --compression=none u-boot-nodtb.bin t8103-j274.dtb > > I'll probably post a v2 of that series this weekend as I fixed the EFI > > GOP support with the help of Heinrich. But that shouldn't matter for > > U-Boot itself. > > OK > > > > > Regarding the device tree, I was afraid that setting > > CONFIG_DEFAULT_DEVICE_TREE would make the distroboot commands try to > > load a device tree from disk before loading the EFI bootloader, but it > > looks I was mistaken there. It still is a little bit pointless to > > build the device tree and a u-boot.bin that includes it, but if that > > makes you happier, I'll add it to the series. > > Well I get a build error without it, so yes please. It's just a default. > > Regards, > Simon > > > > > > Cheers, > > > > Mark > > > > > Subject: [PATCH] Fix up devicetree > > > > > > Get these building. > > > > > > Signed-off-by: Simon Glass > > > --- > > > > > > arch/arm/dts/Makefile | 2 ++ > > > configs/apple_m1_defconfig | 11 +++++------ > > > 2 files changed, 7 insertions(+), 6 deletions(-) > > > > > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > > > index fc16a57e60b..0c40947cc33 100644 > > > --- a/arch/arm/dts/Makefile > > > +++ b/arch/arm/dts/Makefile > > > @@ -1130,6 +1130,8 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) += > > > imx8mm-cl-iot-gate.dtb > > > > > > dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb > > > > > > +dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb t8103-j293.dtb > > > + > > > targets += $(dtb-y) > > > > > > # Add any required device tree compiler flags here > > > diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig > > > index a7ae15576bf..7712a0bac52 100644 > > > --- a/configs/apple_m1_defconfig > > > +++ b/configs/apple_m1_defconfig > > > @@ -1,14 +1,13 @@ > > > CONFIG_ARM=y > > > CONFIG_ARCH_APPLE=y > > > +CONFIG_DEFAULT_DEVICE_TREE="t8103-j293" > > > +CONFIG_USE_PREBOOT=y > > > # CONFIG_DISPLAY_CPUINFO is not set > > > -# CONFIG_MMC is not set > > > -# CONFIG_NET is not set > > > -CONFIG_VIDEO_SIMPLE=y > > > CONFIG_DISPLAY_BOARDINFO_LATE=y > > > +# CONFIG_NET is not set > > > +# CONFIG_MMC is not set > > > CONFIG_USB_XHCI_HCD=y > > > CONFIG_USB_XHCI_DWC3=y > > > CONFIG_USB_KEYBOARD=y > > > -CONFIG_USB_STORAGE=y > > > -CONFIG_USE_PREBOOT=y > > > -CONFIG_PREBOOT="usb start" > > > +CONFIG_VIDEO_SIMPLE=y > > > # CONFIG_GENERATE_SMBIOS_TABLE is not set > > > -- > > > 2.25.1 > > > >