All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Zimmermann <tzimmermann@suse.de>
To: airlied@redhat.com, daniel@ffwll.ch, sam@ravnborg.org,
	kraxel@redhat.com,  emil.l.velikov@gmail.com
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v1 0/4] drm/ast: Disable HW cursor when switching modes
Date: Wed, 5 Aug 2020 12:55:47 +0200	[thread overview]
Message-ID: <64579013-da9a-f1b2-9c72-9e4a3e055948@suse.de> (raw)
In-Reply-To: <20200805105428.2590-1-tzimmermann@suse.de>


[-- Attachment #1.1.1: Type: text/plain, Size: 2158 bytes --]

Should say [PATCH v2 0/4] instead

Am 05.08.20 um 12:54 schrieb Thomas Zimmermann:
> Since converting the ast driver to atomic modesettting, modesetting
> occationally locks up the graphics hardware and turns the display
> permanently dark. This happens once or twice per 10 mode switches.
> Investigation shows that the ast hardware presumably requires the HW
> cursor to be disabled while the modeswitch takes place.
> 
> This patchset fixes the problem by disabling planes before programming
> the CRTC mode or format. After the switch, the planes gets re-enabled if
> they were enabled before. For mere pageflip operations, nothing changes.
> 
> Patches #1 makes format changes work as intended: format registers are
> only updated if necessary. They used to be changed on each pageflip.
> Patch #2 puts the modesetting code before the plane-update code. This
> way, mode setting runs while planes are disabled. Patches #3 and #4
> add a commit-tail function that disables planes if the display's mode
> or format is going to change. The active planes will later get re-enabled
> by the plane-update handler.
> 
> Tested on AST2100 HW. The issue is not 100% reproducible, but does not
> show up after applying the patchset. I think the problem has been fixed.
> 
> v2:
> 	* rewrote the whole patchset
> 	* dropped the cursor patches
> 	* moved modesetting into atomic_begin()
> 	* disable planes in commit-tail function
> 	* don't require full modeset for format changes
> 
> Thomas Zimmermann (4):
>   drm/ast: Only set format registers if primary plane's format changes
>   drm/ast: Set display mode in atomic_begin()
>   drm/ast: Add commit-tail function
>   drm/ast: Disable planes while switching display modes
> 
>  drivers/gpu/drm/ast/ast_drv.h  |   2 +
>  drivers/gpu/drm/ast/ast_mode.c | 148 +++++++++++++++++++++++++--------
>  2 files changed, 114 insertions(+), 36 deletions(-)
> 
> --
> 2.28.0
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 516 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

      parent reply	other threads:[~2020-08-05 10:55 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-05 10:54 [PATCH v1 0/4] drm/ast: Disable HW cursor when switching modes Thomas Zimmermann
2020-08-05 10:54 ` [PATCH v1 1/4] drm/ast: Only set format registers if primary plane's format changes Thomas Zimmermann
2020-08-05 10:54   ` Thomas Zimmermann
2020-08-09 15:53   ` Sasha Levin
2020-08-09 15:53     ` Sasha Levin
2020-08-13 16:25   ` Sasha Levin
2020-08-13 16:25     ` Sasha Levin
2020-08-19 23:57   ` Sasha Levin
2020-08-19 23:57     ` Sasha Levin
2020-08-26 13:54   ` Sasha Levin
2020-08-26 13:54     ` Sasha Levin
2020-08-27  9:10     ` Thomas Zimmermann
2020-08-27  9:10       ` Thomas Zimmermann
2020-08-05 10:54 ` [PATCH v1 2/4] drm/ast: Set display mode in atomic_begin() Thomas Zimmermann
2020-08-05 10:54   ` Thomas Zimmermann
2020-08-09 15:53   ` Sasha Levin
2020-08-09 15:53     ` Sasha Levin
2020-08-13 16:25   ` Sasha Levin
2020-08-13 16:25     ` Sasha Levin
2020-08-19 23:56   ` Sasha Levin
2020-08-19 23:56     ` Sasha Levin
2020-08-26 13:53   ` Sasha Levin
2020-08-26 13:53     ` Sasha Levin
2020-08-05 10:54 ` [PATCH v1 3/4] drm/ast: Add commit-tail function Thomas Zimmermann
2020-08-05 10:54   ` Thomas Zimmermann
2020-08-09 15:53   ` Sasha Levin
2020-08-09 15:53     ` Sasha Levin
2020-08-13 16:25   ` Sasha Levin
2020-08-13 16:25     ` Sasha Levin
2020-08-19 23:56   ` Sasha Levin
2020-08-19 23:56     ` Sasha Levin
2020-08-26 13:53   ` Sasha Levin
2020-08-26 13:53     ` Sasha Levin
2020-08-05 10:54 ` [PATCH v1 4/4] drm/ast: Disable planes while switching display modes Thomas Zimmermann
2020-08-05 10:54   ` Thomas Zimmermann
2020-08-07  8:50   ` daniel
2020-08-07  8:50     ` daniel
2020-08-12  8:25     ` Thomas Zimmermann
2020-08-12  8:25       ` Thomas Zimmermann
2020-08-12 14:04       ` Daniel Vetter
2020-08-12 14:04         ` Daniel Vetter
2020-08-09 15:53   ` Sasha Levin
2020-08-09 15:53     ` Sasha Levin
2020-08-13 16:25   ` Sasha Levin
2020-08-13 16:25     ` Sasha Levin
2020-08-19 23:56   ` Sasha Levin
2020-08-19 23:56     ` Sasha Levin
2020-08-26 13:53   ` Sasha Levin
2020-08-26 13:53     ` Sasha Levin
2020-08-05 10:55 ` Thomas Zimmermann [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=64579013-da9a-f1b2-9c72-9e4a3e055948@suse.de \
    --to=tzimmermann@suse.de \
    --cc=airlied@redhat.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emil.l.velikov@gmail.com \
    --cc=kraxel@redhat.com \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.