Re: rk3399: Graphical artifacts when running for-next

["Michael Röding" <michael.roeding-Dmr80ijK6QUttERQvd4Cp4QuADTiUCJX@public.gmane.org>]

Hi Robert and Heiko,

On 21.02.19 14:26, Heiko Stuebner wrote:
> Hi Robert,
> 
> Am Donnerstag, 21. Februar 2019, 11:27:15 CET schrieb Robert Foss:
>> Hey Heiko,
>>
>> I've just started booting the RK3399 based Radxa Rock Pi 4 on the mainline 
>> kernel. Specifically on linux-rockchip/for-next, with an additional patch
>> adding the GPU DT node[1].
>>
>> Unfortunately I'm seeing an artifact on all display output[2].
>> It, from the VT to 3D content.
>>
>> Is this an issue that has been encountered before?
> 
> I haven't seen something like this before. I do test graphics
> on most Rockchip socs regularly (right now dw-hdmi only
> on non-rk3399 socs though).

for the record: I've seen exactly the same as Heiko on my Rock Pi 4 A
(2GB) using stock Arch Linux ARM Kernel (4.20.11) using dts from "arm64:
dts: rockchip: add ROCK Pi 4 DTS support" (v1 though).

As the dts is for 5.1, i was expecting some minor problems. But since
Heiko had the exact same artifacts i though i let you know that not him
alone.

Michael

> 
> Did you try full linux-next as well? My for-next branch obviously
> only carries dt/soc-driver stuff but not things like drm-misc.
> 
> One possible issue might be the generated clocks. You could check
> $debug/clk/clk_summary for the dclk_vopX to see if that matches
> the suggested clock for the mode. (For example check the requested
> rate in rockchip_vop.c against what it actually gets).
> 
> Heiko
> 
> 
>> [1] https://patchwork.kernel.org/patch/10817637/mbox/
>> [2] https://photos.app.goo.gl/ArffJ3785JSeQatW7
>>
>>
>> Rob.
>>
> 
> 
> 
> 
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>