From mboxrd@z Thu Jan 1 00:00:00 1970 From: Baruch Siach Date: Sat, 19 Dec 2020 20:08:28 +0200 Subject: [Buildroot] [PATCH v3 11/11] configs/solidrun_macchiatobin_efi_defconfig: EFI config for MacchiatoBin In-Reply-To: <20201218202646.1060123-12-hi@senzilla.io> References: <20201218202646.1060123-1-hi@senzilla.io> <20201218202646.1060123-12-hi@senzilla.io> Message-ID: <87bleppt2b.fsf@tarshish> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi Dick, On Fri, Dec 18 2020, Dick Olsson via buildroot wrote: > This introduces an alternative board build for the MacchiatoBin based on > EDK2 (UEFI) firmware loaded as BL33 by ARM Trusted Firmware. > > Signed-off-by: Dick Olsson > --- [...] > diff --git a/board/solidrun/macchiatobin-efi/readme.txt b/board/solidrun/macchiatobin-efi/readme.txt > new file mode 100644 > index 0000000000..42205f3d4e > --- /dev/null > +++ b/board/solidrun/macchiatobin-efi/readme.txt > @@ -0,0 +1,14 @@ > +Intro > +===== > + > +This is the board support for MacchiatoBin with UEFI. Refer to > +board/solidrun/macchiatobin/readme.txt for more information. Please add a "How to build" section here. The details on the "generic" readme.txt "How to build" section are not correct for this defconfig. baruch > + > +More info > +========= > + > +For more information about the UEFI support for this board see: > + > +- https://developer.solid-run.com/knowledge-base/armada-8040-uefi/ > +- http://wiki.macchiatobin.net/tiki-index.php?page=Build+from+source+-+UEFI+EDK+II > +- http://wiki.macchiatobin.net/tiki-index.php?page=Update+the+Bootloader -- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -