All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Iremonger, Bernard" <bernard.iremonger@intel.com>
To: Eric Kinzie <ehkinzie@gmail.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [PATCH v2 4/6] bond mode 4: allow external state machine
Date: Thu, 25 Feb 2016 15:22:35 +0000	[thread overview]
Message-ID: <8CEF83825BEC744B83065625E567D7C219FB4852@IRSMSX108.ger.corp.intel.com> (raw)
In-Reply-To: <56CB0709.6010407@redhat.com>

Hi Eric,
<snip>

> > @@ -157,6 +159,7 @@ struct rte_eth_bond_8023ad_conf {
> >   	uint32_t tx_period_ms;
> >   	uint32_t rx_marker_period_ms;
> >   	uint32_t update_timeout_ms;
> > +	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
> >   };
> 
> This still is a likely an ABI break, previously discussed around here:
> http://dpdk.org/ml/archives/dev/2015-November/027321.html
> 
> It might not be embedded anywhere in DPDK codebase, but there's no
> telling what others might have done with it (have an array of them, embed in
> other structs etc).
> 
> Also ultimately ABI compatibility goes both ways: when the library soname
> does not change then an application is free to assume both downgrading and
> upgrading are safe. In this case, upgrading *might* be okay, downgrading
> certainly is not. So by that measure it definitely is an ABI break.
> 
> [...]
> > diff --git a/drivers/net/bonding/rte_eth_bond_version.map
> > b/drivers/net/bonding/rte_eth_bond_version.map
> > index 22bd920..33d73ff 100644
> > --- a/drivers/net/bonding/rte_eth_bond_version.map
> > +++ b/drivers/net/bonding/rte_eth_bond_version.map
> > @@ -27,3 +27,9 @@ DPDK_2.1 {
> >   	rte_eth_bond_free;
> >
> >   } DPDK_2.0;
> > +
> > +DPDK_2.2 {
> > +	rte_eth_bond_8023ad_ext_collect;
> > +	rte_eth_bond_8023ad_ext_distrib;
> > +	rte_eth_bond_8023ad_ext_slowtx;
> > +} DPDK_2.1;
> >
> 
> These symbols are not part of DPDK 2.2, the version here is wrong.
> Technically it would not actually matter much but better not to confuse
> things unnecessarily.
> 
> 	- Panu -

It looks like Panu's points are valid, a V3 of this patch set which takes care of these issues will be needed.

Patches 1/6, 5/6 and 6/6 of the patch set are bug fixes, so each patch should contain a fixes line.
Patches 2/6, 3/6 and 4/6 are a new feature, the release notes should be updated for this feature.

Could I suggest splitting the patch set into two patch sets, a bug fix patch set and a new feature patch set.

Regards,

Bernard.

  reply	other threads:[~2016-02-25 15:22 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-04 17:14 [PATCH 0/8] bonding: fixes and enhancements Stephen Hemminger
2015-12-04 17:14 ` [PATCH 1/8] bond: use existing enslaved device queues Stephen Hemminger
2016-01-05 13:32   ` Declan Doherty
2015-12-04 17:14 ` [PATCH 2/8] bond mode 4: copy entire config structure Stephen Hemminger
2016-01-05 13:32   ` Declan Doherty
2015-12-04 17:14 ` [PATCH 3/8] bond mode 4: do not ignore multicast Stephen Hemminger
2016-01-05 13:32   ` Declan Doherty
2015-12-04 17:14 ` [PATCH 4/8] bond mode 4: allow external state machine Stephen Hemminger
2016-01-05 13:33   ` Declan Doherty
2015-12-04 17:14 ` [PATCH 5/8] bond: active slaves with no primary Stephen Hemminger
2016-01-05 13:34   ` Declan Doherty
2015-12-04 17:14 ` [PATCH 6/8] bond: handle slaves with fewer queues than bonding device Stephen Hemminger
2015-12-04 18:36   ` Andriy Berestovskyy
2015-12-04 19:18     ` Eric Kinzie
2016-01-05 13:46       ` Declan Doherty
2016-01-05 15:31         ` Stephen Hemminger
2016-02-03 11:28       ` Bruce Richardson
2016-02-03 15:17         ` Declan Doherty
2016-02-03 15:21           ` Thomas Monjalon
2016-02-18 10:26             ` Iremonger, Bernard
2016-02-19 19:17               ` [PATCH v2 0/6] bonding: fixes and enhancements Eric Kinzie
2016-02-19 19:17                 ` [PATCH v2 1/6] bond: use existing enslaved device queues Eric Kinzie
2016-02-19 19:17                 ` [PATCH v2 2/6] bond mode 4: copy entire config structure Eric Kinzie
2016-02-19 19:17                 ` [PATCH v2 3/6] bond mode 4: do not ignore multicast Eric Kinzie
2016-02-19 19:17                 ` [PATCH v2 4/6] bond mode 4: allow external state machine Eric Kinzie
2016-02-22 13:03                   ` Panu Matilainen
2016-02-25 15:22                     ` Iremonger, Bernard [this message]
2016-03-01 17:31                       ` [PATCH V3 0/4] bonding: fixes and enhancements Eric Kinzie
2016-03-01 17:31                         ` [PATCH V3 1/4] bond mode 4: copy entire config structure Eric Kinzie
2016-03-01 17:32                         ` [PATCH V3 2/4] bond mode 4: do not ignore multicast Eric Kinzie
2016-03-01 17:32                         ` [PATCH V3 3/4] bond: active slaves with no primary Eric Kinzie
2016-03-01 17:32                         ` [PATCH V3 4/4] bond: do not activate slave twice Eric Kinzie
2016-03-10 15:41                         ` [PATCH V3 0/4] bonding: fixes and enhancements Bruce Richardson
2016-03-01 17:40                       ` [PATCH v2 4/6] bond mode 4: allow external state machine Eric Kinzie
2016-03-02  9:49                         ` Iremonger, Bernard
2016-02-19 19:17                 ` [PATCH v2 5/6] bond: active slaves with no primary Eric Kinzie
2016-02-19 19:17                 ` [PATCH v2 6/6] bond: do not activate slave twice Eric Kinzie
2015-12-04 17:14 ` [PATCH 7/8] bond: per-slave intermediate rx ring Stephen Hemminger
2015-12-04 17:14 ` [PATCH 8/8] bond: do not activate slave twice Stephen Hemminger
2016-01-05 13:47   ` Declan Doherty
2015-12-23 10:51 ` [PATCH 0/8] bonding: fixes and enhancements Iremonger, Bernard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8CEF83825BEC744B83065625E567D7C219FB4852@IRSMSX108.ger.corp.intel.com \
    --to=bernard.iremonger@intel.com \
    --cc=dev@dpdk.org \
    --cc=ehkinzie@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.