[U-Boot] [PATCH 4/4] arm: vf610: add NAND support for vf610twr

[Stefan Agner <stefan@agner.ch>]

This adds NAND Flash Controller (NFC) support for the Vybrid tower
system (TWR-VF65GS10). Full 16-Bit bus width is supported. Also an
aditional config vf610twr_nand is introduced which gets the
environment from NAND. However, booting U-Boot from NAND is not
yet possible due to missing boot configuration block (BCB).

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 board/freescale/vf610twr/vf610twr.c | 47 ++++++++++++++++++++++++++++++++++---
 configs/vf610twr_defconfig          |  2 +-
 configs/vf610twr_nand_defconfig     |  3 +++
 include/configs/vf610twr.h          | 43 +++++++++++++++++++++++++++++++++
 4 files changed, 91 insertions(+), 4 deletions(-)
 create mode 100644 configs/vf610twr_nand_defconfig

diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c
index 54a9f2c..63ebbf8 100644
--- a/board/freescale/vf610twr/vf610twr.c
+++ b/board/freescale/vf610twr/vf610twr.c
@@ -278,6 +278,39 @@ static void setup_iomux_i2c(void)
 	imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
 }
 
+#ifdef CONFIG_NAND_FSL_NFC
+static void setup_iomux_nfc(void)
+{
+	static const iomux_v3_cfg_t nfc_pads[] = {
+		VF610_PAD_PTD31__NF_IO15,
+		VF610_PAD_PTD30__NF_IO14,
+		VF610_PAD_PTD29__NF_IO13,
+		VF610_PAD_PTD28__NF_IO12,
+		VF610_PAD_PTD27__NF_IO11,
+		VF610_PAD_PTD26__NF_IO10,
+		VF610_PAD_PTD25__NF_IO9,
+		VF610_PAD_PTD24__NF_IO8,
+		VF610_PAD_PTD23__NF_IO7,
+		VF610_PAD_PTD22__NF_IO6,
+		VF610_PAD_PTD21__NF_IO5,
+		VF610_PAD_PTD20__NF_IO4,
+		VF610_PAD_PTD19__NF_IO3,
+		VF610_PAD_PTD18__NF_IO2,
+		VF610_PAD_PTD17__NF_IO1,
+		VF610_PAD_PTD16__NF_IO0,
+		VF610_PAD_PTB24__NF_WE_B,
+		VF610_PAD_PTB25__NF_CE0_B,
+		VF610_PAD_PTB27__NF_RE_B,
+		VF610_PAD_PTC26__NF_RB_B,
+		VF610_PAD_PTC27__NF_ALE,
+		VF610_PAD_PTC28__NF_CLE
+	};
+
+	imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
+}
+#endif
+
+
 static void setup_iomux_qspi(void)
 {
 	static const iomux_v3_cfg_t qspi0_pads[] = {
@@ -354,6 +387,8 @@ static void clock_init(void)
 		CCM_CCGR7_SDHC1_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
 		CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
+	clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
+		CCM_CCGR10_NFC_CTRL_MASK);
 
 	clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN,
 		ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT);
@@ -373,14 +408,17 @@ static void clock_init(void)
 		CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
 		CCM_CACRR_ARM_CLK_DIV(0));
 	clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
-		CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3));
+		CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3) |
+		CCM_CSCMR1_NFC_CLK_SEL(0));
 	clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
 		CCM_CSCDR1_RMII_CLK_EN);
 	clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
-		CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0));
+		CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) |
+		CCM_CSCDR2_NFC_EN);
 	clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
 		CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) |
-		CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3));
+		CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3) |
+		CCM_CSCDR3_NFC_PRE_DIV(5));
 	clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
 		CCM_CSCMR2_RMII_CLK_SEL(0));
 }
@@ -411,6 +449,9 @@ int board_early_init_f(void)
 	setup_iomux_enet();
 	setup_iomux_i2c();
 	setup_iomux_qspi();
+#ifdef CONFIG_NAND_FSL_NFC
+	setup_iomux_nfc();
+#endif
 
 	return 0;
 }
diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
index 10e6432..7de374a 100644
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@@ -1,3 +1,3 @@
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
 CONFIG_ARM=y
 CONFIG_TARGET_VF610TWR=y
diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
new file mode 100644
index 0000000..e78db26
--- /dev/null
+++ b/configs/vf610twr_nand_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_NAND"
+CONFIG_ARM=y
+CONFIG_TARGET_VF610TWR=y
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 0342550..543f241 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -14,6 +14,7 @@
 
 #define CONFIG_VF610
 
+#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
@@ -44,6 +45,39 @@
 
 #undef CONFIG_CMD_IMLS
 
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_FSL_NFC
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
+
+/* UBI */
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Dynamic MTD partition support */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define MTDIDS_DEFAULT			"nand0=fsl_nfc"
+#define MTDPARTS_DEFAULT		"mtdparts=fsl_nfc:"		\
+					"128k(vf-bcb)ro,"		\
+					"1408k(u-boot)ro,"		\
+					"512k(u-boot-env),"		\
+					"4m(kernel),"			\
+					"512k(fdt),"		\
+					"-(rootfs)"
+#endif
+
 #define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
@@ -218,11 +252,20 @@
 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH
 
+#ifdef CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_SIZE			(8 * 1024)
 #define CONFIG_ENV_IS_IN_MMC
 
 #define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE			(64 * 2048)
+#define CONFIG_ENV_SECT_SIZE		(64 * 2048)
+#define CONFIG_ENV_RANGE		(512 * 1024)
+#define CONFIG_ENV_OFFSET		0x180000
+#endif
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
-- 
2.0.4