Just when I thought it worked here are more problems:
The steps I followed were:
2. yum install iproute-4.6.0-1.fc25.x86_64.rpm
I installed from fc25 since rhel7 does not have an upgraded iproute package.
3. After installing the iproute 4.6 I do NOT get the error message:
"Error: argument "suppress_prefixlength" is wrong: Failed to parse rule type"
4. ifconfig shows the wg0 interface.
5. After approx 2 minutes my ssh connection to the machine over the LAN (eth0) gets disconnected.
6. When I ssh back in to the machine, ifconfig does not show the wg0 interface.
Please help :(
--
VK
On Wed, Apr 18, 2018 at 2:33 PM, Vikas <kedia.vikas@gmail.com> wrote:
>
> Thank you Jason. Your response is very appreciated along with your work on the wireguard project.
>
> 1. Is there a minimum version of iproute2 that is needed?
>
> 2. Can that be mention in the dependency.
>
> 3. I installed from source and from the suggested rpm method at https://www.wireguard.com/install/ would it be possible to check for version for iproute2 and fail with a error message,
>
> Regards,
>
> Vikas
>
>
>
> --
> VK
>
> On Wed, Apr 18, 2018 at 2:10 PM, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
>>
>> You need a newer version of iproute2.
>
>
_______________________________________________ WireGuard mailing list WireGuard@lists.zx2c4.com https://lists.zx2c4.com/mailman/listinfo/wireguard
get the src.rpm and build it on rhel, the rpm binary from fedora should not work and probably is not working
Regards