From: Sanchayan Maity <maitysanchayan@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 6/6] board: toradex: colibri_vf: Add DCU support for Colibri Vybrid
Date: Thu, 30 Mar 2017 12:44:06 +0530 [thread overview]
Message-ID: <94e5a0e5313acd147457f7a81aa53ad761d7b985.1490856350.git.maitysanchayan@gmail.com> (raw)
In-Reply-To: <cover.1490856350.git.maitysanchayan@gmail.com>
From: Stefan Agner <stefan.agner@toradex.com>
The Vybrid SoC family has the same display controller unit (DCU)
like the LS1021A SoC. This patch adds platform data, pinmux defines
and clock control to enable the driver for Toradex Colibri Vybrid
module.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
arch/arm/include/asm/arch-vf610/crm_regs.h | 14 +++++
arch/arm/include/asm/arch-vf610/imx-regs.h | 2 +
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 31 +++++++++++
arch/arm/include/asm/imx-common/iomux-v3.h | 3 ++
board/toradex/colibri_vf/Makefile | 1 +
board/toradex/colibri_vf/colibri_vf.c | 76 +++++++++++++++++++++------
board/toradex/colibri_vf/dcu.c | 38 ++++++++++++++
configs/colibri_vf_defconfig | 4 ++
include/configs/colibri_vf.h | 18 ++++++-
9 files changed, 169 insertions(+), 18 deletions(-)
create mode 100644 board/toradex/colibri_vf/dcu.c
diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index a46e396f1d..73b1dd2f14 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -9,6 +9,8 @@
#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
/* Clock Controller Module (CCM) */
struct ccm_reg {
u32 ccr;
@@ -150,6 +152,9 @@ struct anadig_reg {
#define CCM_CACRR_ARM_CLK_DIV_MASK 0x7
#define CCM_CACRR_ARM_CLK_DIV(v) ((v) & 0x7)
+#define CCM_CSCMR1_DCU1_CLK_SEL (1 << 29)
+#define CCM_CSCMR1_DCU0_CLK_SEL (1 << 28)
+
#define CCM_CSCMR1_QSPI0_CLK_SEL_OFFSET 22
#define CCM_CSCMR1_QSPI0_CLK_SEL_MASK (0x3 << 22)
#define CCM_CSCMR1_QSPI0_CLK_SEL(v) (((v) & 0x3) << 22)
@@ -174,6 +179,13 @@ struct anadig_reg {
#define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK (0xf << 20)
#define CCM_CSCDR2_ESDHC1_CLK_DIV(v) (((v) & 0xf) << 20)
+#define CCM_CSCDR3_DCU1_EN (1 << 23)
+#define CCM_CSCDR3_DCU1_DIV_MASK (0x7 << 20)
+#define CCM_CSCDR3_DCU1_DIV(v) (((v) & 0x7) << 20)
+#define CCM_CSCDR3_DCU0_EN (1 << 19)
+#define CCM_CSCDR3_DCU0_DIV_MASK (0x7 << 16)
+#define CCM_CSCDR3_DCU0_DIV(v) (((v) & 0x7) << 16)
+
#define CCM_CSCDR3_NFC_PRE_DIV_OFFSET 13
#define CCM_CSCDR3_NFC_PRE_DIV_MASK (0x7 << 13)
#define CCM_CSCDR3_NFC_PRE_DIV(v) (((v) & 0x7) << 13)
@@ -193,6 +205,7 @@ struct anadig_reg {
#define CCM_CCGR0_DSPI1_CTRL_MASK (0x3 << 26)
#define CCM_CCGR1_USBC0_CTRL_MASK (0x3 << 8)
#define CCM_CCGR1_PIT_CTRL_MASK (0x3 << 14)
+#define CCM_CCGR1_TCON0_CTRL_MASK (0x3 << 26)
#define CCM_CCGR1_WDOGA5_CTRL_MASK (0x3 << 28)
#define CCM_CCGR2_QSPI0_CTRL_MASK (0x3 << 8)
#define CCM_CCGR2_IOMUXC_CTRL_MASK (0x3 << 16)
@@ -203,6 +216,7 @@ struct anadig_reg {
#define CCM_CCGR2_PORTE_CTRL_MASK (0x3 << 26)
#define CCM_CCGR3_ANADIG_CTRL_MASK 0x3
#define CCM_CCGR3_SCSC_CTRL_MASK (0x3 << 4)
+#define CCM_CCGR3_DCU0_CTRL_MASK (0x3 << 16)
#define CCM_CCGR4_WKUP_CTRL_MASK (0x3 << 20)
#define CCM_CCGR4_CCM_CTRL_MASK (0x3 << 22)
#define CCM_CCGR4_GPC_CTRL_MASK (0x3 << 24)
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index cac68efde2..ca97462c35 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -69,6 +69,7 @@
#define USB_PHY0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00050800)
#define USB_PHY1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00050C00)
#define SCSC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00052000)
+#define DCU0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00058000)
#define ASRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00060000)
#define SPDIF_BASE_ADDR (AIPS0_BASE_ADDR + 0x00061000)
#define ESAI_BASE_ADDR (AIPS0_BASE_ADDR + 0x00062000)
@@ -98,6 +99,7 @@
#define USBC1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00034000)
#define ENET_BASE_ADDR (AIPS1_BASE_ADDR + 0x00050000)
#define ENET1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00051000)
+#define DCU1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00058000)
#define NFC_BASE_ADDR (AIPS1_BASE_ADDR + 0x00060000)
#define QSPI0_AMBA_BASE 0x20000000
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index a140be05f1..5af071a4db 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -40,6 +40,8 @@
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
#define VF610_DSPI_SIN_PAD_CTRL (PAD_CTL_IBE_ENABLE | PAD_CTL_DSE_20ohm | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+#define VF610_DCU_PAD_CTRL (PAD_CTL_SPEED_MED | PAD_CTL_SRE | \
+ PAD_CTL_DSE_37ohm | PAD_CTL_OBE_ENABLE)
enum {
VF610_PAD_PTA6__RMII0_CLKIN = IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -166,6 +168,35 @@ enum {
VF610_PAD_PTC28__NF_CLE = IOMUX_PAD(0x0194, 0x0194, 6, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
+ VF610_PAD_PTE0__DCU0_HSYNC = IOMUX_PAD(0x01a4, 0x01a4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE1__DCU0_VSYNC = IOMUX_PAD(0x01a8, 0x01a8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE2__DCU0_PCLK = IOMUX_PAD(0x01ac, 0x01ac, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE4__DCU0_DE = IOMUX_PAD(0x01b4, 0x01b4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE5__DCU0_R0 = IOMUX_PAD(0x01b8, 0x01b8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE6__DCU0_R1 = IOMUX_PAD(0x01bc, 0x01bc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE7__DCU0_R2 = IOMUX_PAD(0x01c0, 0x01c0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE8__DCU0_R3 = IOMUX_PAD(0x01c4, 0x01c4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE9__DCU0_R4 = IOMUX_PAD(0x01c8, 0x01c8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE10__DCU0_R5 = IOMUX_PAD(0x01cc, 0x01cc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE11__DCU0_R6 = IOMUX_PAD(0x01d0, 0x01d0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE12__DCU0_R7 = IOMUX_PAD(0x01d4, 0x01d4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE13__DCU0_G0 = IOMUX_PAD(0x01d8, 0x01d8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE14__DCU0_G1 = IOMUX_PAD(0x01dc, 0x01dc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE15__DCU0_G2 = IOMUX_PAD(0x01e0, 0x01e0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE16__DCU0_G3 = IOMUX_PAD(0x01e4, 0x01e4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE17__DCU0_G4 = IOMUX_PAD(0x01e8, 0x01e8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE18__DCU0_G5 = IOMUX_PAD(0x01ec, 0x01ec, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE19__DCU0_G6 = IOMUX_PAD(0x01f0, 0x01f0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE20__DCU0_G7 = IOMUX_PAD(0x01f4, 0x01f4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE21__DCU0_B0 = IOMUX_PAD(0x01f8, 0x01f8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE22__DCU0_B1 = IOMUX_PAD(0x01fc, 0x01fc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE23__DCU0_B2 = IOMUX_PAD(0x0200, 0x0200, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE24__DCU0_B3 = IOMUX_PAD(0x0204, 0x0204, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE25__DCU0_B4 = IOMUX_PAD(0x0208, 0x0208, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE26__DCU0_B5 = IOMUX_PAD(0x020c, 0x020c, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE27__DCU0_B6 = IOMUX_PAD(0x0210, 0x0210, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+ VF610_PAD_PTE28__DCU0_B7 = IOMUX_PAD(0x0214, 0x0214, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+
VF610_PAD_DDR_RESETB = IOMUX_PAD(0x021c, 0x021c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
VF610_PAD_DDR_A15__DDR_A_15 = IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
VF610_PAD_DDR_A14__DDR_A_14 = IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index 7587cbbf95..ba0ed43811 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -165,7 +165,10 @@ typedef u64 iomux_v3_cfg_t;
#define PAD_CTL_ODE (1 << 10)
#define PAD_CTL_DSE_150ohm (1 << 6)
+#define PAD_CTL_DSE_75ohm (2 << 6)
#define PAD_CTL_DSE_50ohm (3 << 6)
+#define PAD_CTL_DSE_37ohm (4 << 6)
+#define PAD_CTL_DSE_30ohm (5 << 6)
#define PAD_CTL_DSE_25ohm (6 << 6)
#define PAD_CTL_DSE_20ohm (7 << 6)
diff --git a/board/toradex/colibri_vf/Makefile b/board/toradex/colibri_vf/Makefile
index c7e5134ba1..4d6287f14a 100644
--- a/board/toradex/colibri_vf/Makefile
+++ b/board/toradex/colibri_vf/Makefile
@@ -5,3 +5,4 @@
#
obj-y := colibri_vf.o
+obj-$(CONFIG_VIDEO_FSL_DCU_FB) += dcu.o
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 7b74eb7e9d..46dd15bac8 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -17,6 +17,7 @@
#include <mmc.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
+#include <fsl_dcu_fb.h>
#include <jffs2/load_kernel.h>
#include <miiphy.h>
#include <mtd_node.h>
@@ -295,6 +296,49 @@ static void setup_iomux_gpio(void)
}
#endif
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+static void setup_iomux_fsl_dcu(void)
+{
+ static const iomux_v3_cfg_t dcu0_pads[] = {
+ VF610_PAD_PTE0__DCU0_HSYNC,
+ VF610_PAD_PTE1__DCU0_VSYNC,
+ VF610_PAD_PTE2__DCU0_PCLK,
+ VF610_PAD_PTE4__DCU0_DE,
+ VF610_PAD_PTE5__DCU0_R0,
+ VF610_PAD_PTE6__DCU0_R1,
+ VF610_PAD_PTE7__DCU0_R2,
+ VF610_PAD_PTE8__DCU0_R3,
+ VF610_PAD_PTE9__DCU0_R4,
+ VF610_PAD_PTE10__DCU0_R5,
+ VF610_PAD_PTE11__DCU0_R6,
+ VF610_PAD_PTE12__DCU0_R7,
+ VF610_PAD_PTE13__DCU0_G0,
+ VF610_PAD_PTE14__DCU0_G1,
+ VF610_PAD_PTE15__DCU0_G2,
+ VF610_PAD_PTE16__DCU0_G3,
+ VF610_PAD_PTE17__DCU0_G4,
+ VF610_PAD_PTE18__DCU0_G5,
+ VF610_PAD_PTE19__DCU0_G6,
+ VF610_PAD_PTE20__DCU0_G7,
+ VF610_PAD_PTE21__DCU0_B0,
+ VF610_PAD_PTE22__DCU0_B1,
+ VF610_PAD_PTE23__DCU0_B2,
+ VF610_PAD_PTE24__DCU0_B3,
+ VF610_PAD_PTE25__DCU0_B4,
+ VF610_PAD_PTE26__DCU0_B5,
+ VF610_PAD_PTE27__DCU0_B6,
+ VF610_PAD_PTE28__DCU0_B7,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(dcu0_pads, ARRAY_SIZE(dcu0_pads));
+}
+
+static void setup_tcon(void)
+{
+ setbits_le32(TCON0_BASE_ADDR, (1 << 29));
+}
+#endif
+
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{ESDHC1_BASE_ADDR},
@@ -431,6 +475,11 @@ static void clock_init(void)
CCM_CSCDR3_NFC_PRE_DIV(3));
clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
CCM_CSCMR2_RMII_CLK_SEL(2));
+
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+ setbits_le32(&ccm->ccgr1, CCM_CCGR1_TCON0_CTRL_MASK);
+ setbits_le32(&ccm->ccgr3, CCM_CCGR3_DCU0_CTRL_MASK);
+#endif
}
static void mscm_init(void)
@@ -470,6 +519,11 @@ int board_early_init_f(void)
setup_iomux_dspi();
#endif
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+ setup_tcon();
+ setup_iomux_fsl_dcu();
+#endif
+
return 0;
}
@@ -478,22 +532,6 @@ int board_late_init(void)
{
struct src *src = (struct src *)SRC_BASE_ADDR;
- /* Default memory arguments */
- if (!getenv("memargs")) {
- switch (gd->ram_size) {
- case 0x08000000:
- /* 128 MB */
- setenv("memargs", "mem=128M");
- break;
- case 0x10000000:
- /* 256 MB */
- setenv("memargs", "mem=256M");
- break;
- default:
- printf("Failed detecting RAM size.\n");
- }
- }
-
if (((src->sbmr2 & SRC_SBMR2_BMOD_MASK) >> SRC_SBMR2_BMOD_SHIFT)
== SRC_SBMR2_BMOD_SERIAL) {
printf("Serial Downloader recovery mode, disable autoboot\n");
@@ -541,6 +579,7 @@ int checkboard(void)
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
+ int ret = 0;
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
static struct node_info nodes[] = {
{ "fsl,vf610-nfc", MTD_DEV_TYPE_NAND, }, /* NAND flash */
@@ -550,6 +589,11 @@ int ft_board_setup(void *blob, bd_t *bd)
puts(" Updating MTD partitions...\n");
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+ ret = fsl_dcu_fixedfb_setup(blob);
+ if (ret)
+ return ret;
+#endif
return ft_common_board_setup(blob, bd);
}
diff --git a/board/toradex/colibri_vf/dcu.c b/board/toradex/colibri_vf/dcu.c
new file mode 100644
index 0000000000..3fa6a763d8
--- /dev/null
+++ b/board/toradex/colibri_vf/dcu.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2017 Toradex AG
+ *
+ * FSL DCU platform driver
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/crm_regs.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_dcu_fb.h>
+#include "div64.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int dcu_set_pixel_clock(unsigned int pixclock)
+{
+ struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+ unsigned long long div;
+
+ clrbits_le32(&ccm->cscmr1, CCM_CSCMR1_DCU0_CLK_SEL);
+ clrsetbits_le32(&ccm->cscdr3,
+ CCM_CSCDR3_DCU0_DIV_MASK | CCM_CSCDR3_DCU0_EN,
+ CCM_CSCDR3_DCU0_DIV(0) | CCM_CSCDR3_DCU0_EN);
+ div = (unsigned long long)(PLL1_PFD2_FREQ / 1000);
+ do_div(div, pixclock);
+
+ return div;
+}
+
+int platform_dcu_init(unsigned int xres, unsigned int yres,
+ const char *port,
+ struct fb_videomode *dcu_fb_videomode)
+{
+ fsl_dcu_init(xres, yres, 32);
+
+ return 0;
+}
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 0474abc3c5..1f0f929ce5 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -52,3 +52,7 @@ CONFIG_G_DNL_MANUFACTURER="Toradex"
CONFIG_G_DNL_VENDOR_NUM=0x1b67
CONFIG_G_DNL_PRODUCT_NUM=0x4000
CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_FSL_DCU_FB=y
+CONFIG_SYS_CONSOLE_FG_COL=0x00
+CONFIG_SYS_CONSOLE_BG_COL=0x00
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 888899eacb..db9fec1eff 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -25,8 +25,20 @@
#define CONFIG_MXC_OCOTP
#endif
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+#define CONFIG_CMD_BMP
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_SYS_FSL_DCU_LE
+
+#define CONFIG_SYS_DCU_ADDR DCU0_BASE_ADDR
+#define DCU_TOTAL_LAYER_NUM 64
+#define DCU_LAYER_MAX_NUM 6
+#endif
+
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 4 * 1024 * 1024)
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
@@ -130,6 +142,8 @@
"setupdate=run setsdupdate || run setusbupdate\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
+ "video-mode=dcufb:640x480-16 at 60,monitor=lcd\0" \
+ "splashpos=m,m\0" \
SD_BOOTCMD \
NFS_BOOTCMD \
UBI_BOOTCMD
@@ -154,7 +168,7 @@
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+#define CONFIG_STACKSIZE SZ_256K
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
--
2.12.1
prev parent reply other threads:[~2017-03-30 7:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-30 7:14 [U-Boot] [PATCH v2 0/6] Introduce DCU support for Vybrid Sanchayan Maity
2017-03-30 7:14 ` [U-Boot] [PATCH v2 1/6] Convert CONFIG_FSL_DCU_FB to Kconfig Sanchayan Maity
2017-03-30 7:14 ` [U-Boot] [PATCH v2 2/6] video: fsl_dcu_fb: fix framebuffer to the end of memory Sanchayan Maity
2017-03-30 7:14 ` [U-Boot] [PATCH v2 3/6] video: fsl_dcu_fb: Enable pixel clock after initialization Sanchayan Maity
2017-03-30 7:14 ` [U-Boot] [PATCH v2 4/6] video: fsl_dcu_fb: Update DCU layers for Vybrid Sanchayan Maity
2017-03-30 15:34 ` Stefan Agner
2017-03-30 7:14 ` [U-Boot] [PATCH v2 5/6] video: fsl_dcu_fb: add additional modes for DCU Sanchayan Maity
2017-03-30 7:14 ` Sanchayan Maity [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=94e5a0e5313acd147457f7a81aa53ad761d7b985.1490856350.git.maitysanchayan@gmail.com \
--to=maitysanchayan@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.