From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 14/14] net: gem: Move gem to Kconfig
Date: Thu, 3 Dec 2015 21:49:30 +0530 [thread overview]
Message-ID: <CAD6G_RTtXjUiRgJpTKksM7E001ZGHEoGqv80Nn0H7QT+HjecHw@mail.gmail.com> (raw)
In-Reply-To: <47ed74cbc571897a8d60dfa7faefa9e6a1d3d572.1449154075.git.michal.simek@xilinx.com>
On 3 December 2015 at 20:18, Michal Simek <michal.simek@xilinx.com> wrote:
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
Reviewed-by: Jagan Teki <jteki@openedev.com>
>
> Changes in v3: None
> Changes in v2: None
>
> configs/xilinx_zynqmp_ep_defconfig | 1 +
> configs/zynq_microzed_defconfig | 1 +
> configs/zynq_picozed_defconfig | 1 +
> configs/zynq_zc702_defconfig | 1 +
> configs/zynq_zc706_defconfig | 1 +
> configs/zynq_zc770_xm010_defconfig | 1 +
> configs/zynq_zc770_xm011_defconfig | 1 +
> configs/zynq_zc770_xm012_defconfig | 1 +
> configs/zynq_zc770_xm013_defconfig | 1 +
> configs/zynq_zed_defconfig | 1 +
> configs/zynq_zybo_defconfig | 1 +
> drivers/net/Kconfig | 6 ++++++
> include/configs/xilinx_zynqmp.h | 4 +---
> include/configs/xilinx_zynqmp_ep.h | 3 ---
> include/configs/zynq-common.h | 3 +--
> include/configs/zynq_microzed.h | 3 ---
> include/configs/zynq_picozed.h | 3 ---
> include/configs/zynq_zc70x.h | 3 ---
> include/configs/zynq_zc770.h | 4 ----
> include/configs/zynq_zed.h | 3 ---
> include/configs/zynq_zybo.h | 3 ---
> 21 files changed, 19 insertions(+), 27 deletions(-)
>
> diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig
> index 79304c1fb121..22915f19bfbb 100644
> --- a/configs/xilinx_zynqmp_ep_defconfig
> +++ b/configs/xilinx_zynqmp_ep_defconfig
> @@ -22,4 +22,5 @@ CONFIG_CMD_TIME=y
> CONFIG_CMD_TIMER=y
> CONFIG_OF_EMBED=y
> CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_ZYNQ_GEM=y
> # CONFIG_REGEX is not set
> diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
> index 0608d8a733cf..c68efc8f41af 100644
> --- a/configs/zynq_microzed_defconfig
> +++ b/configs/zynq_microzed_defconfig
> @@ -16,4 +16,5 @@ CONFIG_SPI_FLASH_SPANSION=y
> CONFIG_SPI_FLASH_STMICRO=y
> CONFIG_SPI_FLASH_WINBOND=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> CONFIG_ZYNQ_QSPI=y
> diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig
> index d6f0ce388832..62eb79f630e3 100644
> --- a/configs/zynq_picozed_defconfig
> +++ b/configs/zynq_picozed_defconfig
> @@ -9,3 +9,4 @@ CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
> index 8318b94ecbb2..dd588aff72db 100644
> --- a/configs/zynq_zc702_defconfig
> +++ b/configs/zynq_zc702_defconfig
> @@ -15,4 +15,5 @@ CONFIG_SPI_FLASH_SPANSION=y
> CONFIG_SPI_FLASH_STMICRO=y
> CONFIG_SPI_FLASH_WINBOND=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> CONFIG_ZYNQ_QSPI=y
> diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
> index 533aff9a7531..2e525b42d42a 100644
> --- a/configs/zynq_zc706_defconfig
> +++ b/configs/zynq_zc706_defconfig
> @@ -16,4 +16,5 @@ CONFIG_SPI_FLASH_SPANSION=y
> CONFIG_SPI_FLASH_STMICRO=y
> CONFIG_SPI_FLASH_WINBOND=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> CONFIG_ZYNQ_QSPI=y
> diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
> index 689d19e992da..6f2ad17985e1 100644
> --- a/configs/zynq_zc770_xm010_defconfig
> +++ b/configs/zynq_zc770_xm010_defconfig
> @@ -18,5 +18,6 @@ CONFIG_SPI_FLASH_STMICRO=y
> CONFIG_SPI_FLASH_SST=y
> CONFIG_SPI_FLASH_WINBOND=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> CONFIG_ZYNQ_SPI=y
> CONFIG_ZYNQ_QSPI=y
> diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
> index c7125c304ab8..d20b3edf5cb3 100644
> --- a/configs/zynq_zc770_xm011_defconfig
> +++ b/configs/zynq_zc770_xm011_defconfig
> @@ -13,3 +13,4 @@ CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig
> index a8f28da11767..4e963a45e2cf 100644
> --- a/configs/zynq_zc770_xm012_defconfig
> +++ b/configs/zynq_zc770_xm012_defconfig
> @@ -11,3 +11,4 @@ CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig
> index 6b2fd8ca4ebb..f2d8f14f8784 100644
> --- a/configs/zynq_zc770_xm013_defconfig
> +++ b/configs/zynq_zc770_xm013_defconfig
> @@ -13,3 +13,4 @@ CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
> index 4076c30707b1..2e7c68d6a49e 100644
> --- a/configs/zynq_zed_defconfig
> +++ b/configs/zynq_zed_defconfig
> @@ -16,4 +16,5 @@ CONFIG_SPI_FLASH_SPANSION=y
> CONFIG_SPI_FLASH_STMICRO=y
> CONFIG_SPI_FLASH_WINBOND=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> CONFIG_ZYNQ_QSPI=y
> diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
> index c51049e664b1..6f0bd0b79c5e 100644
> --- a/configs/zynq_zybo_defconfig
> +++ b/configs/zynq_zybo_defconfig
> @@ -12,6 +12,7 @@ CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_PHYLIB=y
> +CONFIG_ZYNQ_GEM=y
> CONFIG_DEBUG_UART=y
> CONFIG_DEBUG_UART_ZYNQ=y
> CONFIG_DEBUG_UART_BASE=0xe0001000
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index a03a95d0fbff..6905cc02e392 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -101,4 +101,10 @@ config PCH_GBE
> This MAC is present in Intel Platform Controller Hub EG20T. It
> supports 10/100/1000 Mbps operation.
>
> +config ZYNQ_GEM
> + depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
> + bool "Xilinx Ethernet GEM"
> + help
> + This MAC is presetn in Xilinx Zynq and ZynqMP SoCs.
%s/presetn/present/g
And better to add few more lines of help text, least of 3 lines.
thanks!
--
Jagan.
next prev parent reply other threads:[~2015-12-03 16:19 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-03 14:47 [U-Boot] [PATCH v3 01/14] ARM: zynq: Remove PHYLIB from config to defconfig Michal Simek
2015-12-03 14:47 ` [U-Boot] [PATCH v3 02/14] ARM: zynq: Remove CONFIG_API Michal Simek
2015-12-03 16:09 ` Jagan Teki
2015-12-03 17:57 ` Jeroen Hofstee
2015-12-04 8:20 ` Michal Simek
2015-12-04 8:33 ` Jagan Teki
2015-12-04 7:47 ` Michal Simek
2015-12-03 14:47 ` [U-Boot] [PATCH v3 03/14] net: gem: Do not continue if phy is not found Michal Simek
2015-12-03 16:23 ` Jagan Teki
2015-12-03 14:47 ` [U-Boot] [PATCH v3 04/14] net: gem: Change mdio_wait prototype to pass regs Michal Simek
2015-12-03 14:47 ` [U-Boot] [PATCH v3 05/14] net: gem: Change mii function not to use eth_device structure Michal Simek
2015-12-03 14:47 ` [U-Boot] [PATCH v3 06/14] net: gem: Remove phydev variable Michal Simek
2015-12-03 14:47 ` [U-Boot] [PATCH v3 07/14] net: gem: Extract phy init code Michal Simek
2015-12-03 14:47 ` [U-Boot] [PATCH v3 08/14] net: gem: Check if priv->phydev is valid Michal Simek
2015-12-03 16:24 ` Jagan Teki
2015-12-03 14:47 ` [U-Boot] [PATCH v3 09/14] net: gem: Enable MDIO bus earlier Michal Simek
2015-12-03 14:47 ` [U-Boot] [PATCH v3 10/14] net: gem: Remove zynq_gem_of_init() Michal Simek
2015-12-03 16:24 ` Jagan Teki
2015-12-03 14:47 ` [U-Boot] [PATCH v3 11/14] net: gem: Fix miiphy_read name Michal Simek
2015-12-03 16:25 ` Jagan Teki
2015-12-03 14:48 ` [U-Boot] [PATCH v3 12/14] net: gem: Move driver to DM Michal Simek
2015-12-03 16:16 ` Jagan Teki
2015-12-03 18:57 ` Simon Glass
2015-12-03 19:00 ` Joe Hershberger
2015-12-03 19:04 ` Simon Glass
2015-12-04 6:24 ` Bin Meng
2015-12-03 14:48 ` [U-Boot] [PATCH v3 13/14] net: gem: Read information about interface from DT Michal Simek
2015-12-03 16:21 ` Jagan Teki
2015-12-03 14:48 ` [U-Boot] [PATCH v3 14/14] net: gem: Move gem to Kconfig Michal Simek
2015-12-03 16:19 ` Jagan Teki [this message]
2015-12-03 16:11 ` [U-Boot] [PATCH v3 01/14] ARM: zynq: Remove PHYLIB from config to defconfig Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAD6G_RTtXjUiRgJpTKksM7E001ZGHEoGqv80Nn0H7QT+HjecHw@mail.gmail.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.