From mboxrd@z Thu Jan 1 00:00:00 1970 From: Green Wan Date: Fri, 16 Apr 2021 16:20:27 +0800 Subject: [PATCH v6 1/7] riscv: dts: add fu740 support In-Reply-To: References: <20210408134020.238658-1-green.wan@sifive.com> <20210408134020.238658-2-green.wan@sifive.com> <752D002CFF5D0F4FA35C0100F1D73F3FE5E96768@ATCPCS12.andestech.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Apr 16, 2021 at 3:11 PM Rick Chen wrote: > > Hi Green > > > On Thu, Apr 15, 2021 at 1:25 PM Rick Chen wrote: > > > > > > Hi Green, > > > > > > > From: Green Wan [mailto:green.wan at sifive.com] > > > > Sent: Thursday, April 08, 2021 9:40 PM > > > > Cc: bmeng.cn at gmail.com; Green Wan; Greentime Hu; Rick Jian-Zhi Chen(???); Paul Walmsley; Palmer Dabbelt; Anup Patel; Atish Patra; Pragnesh Patel; Lukasz Majewski; Joe Hershberger; Ramon Fried; u-boot at lists.denx.de > > > > Subject: [PATCH v6 1/7] riscv: dts: add fu740 support > > > > > > > > Add dts support for fu740. The HiFive Unmatched support is based on > > > > fu740 cpu and drivers in following patch set. > > > > > > > > Signed-off-by: Green Wan > > > > [greentime.hu: set fu740 speed to 1.2GHz] > > > > Signed-off-by: Greentime Hu > > > > Reviewed-by: Bin Meng > > > > --- > > > > arch/riscv/dts/Makefile | 1 + > > > > arch/riscv/dts/fu740-c000-u-boot.dtsi | 105 ++++++ > > > > arch/riscv/dts/fu740-c000.dtsi | 329 ++++++++++++++++++ > > > > include/dt-bindings/clock/sifive-fu740-prci.h | 25 ++ > > > > include/dt-bindings/reset/sifive-fu740-prci.h | 19 + > > > > 5 files changed, 479 insertions(+) > > > > create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi > > > > create mode 100644 arch/riscv/dts/fu740-c000.dtsi > > > > create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h > > > > create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h > > > > > > > > diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile > > > > index 8138d89d84..ed32f56c9e 100644 > > > > --- a/arch/riscv/dts/Makefile > > > > +++ b/arch/riscv/dts/Makefile > > > > @@ -2,6 +2,7 @@ > > > > > > > > dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb > > > > dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb > > > > +dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb > > > > > > Makefile need the dts file, but it is not exist in this patch. It > > > doesn't make sense. > > > > > > Maybe you can combine with the dts relative files in [PATCH v6 6/7] > > > into one patch and name as : > > > riscv: dts: ... > > > > Hi Rick, > > > > Thanks for review. > > > > How about move change of arch/riscv/dts/Makefile to [PATCH v6 6/7] > > since it's more like a board dependent change. This patch [1/7] is > > pure for fu740 dts review. I'd like to keep one for fu740 dts and the > > rest dts for unmatched board. > > > > What do you think of it? > > It is OK. > > You may arrange them nearby as below: > 6/x riscv: dts: support fu740 > 7/x riscv: dst: support HiFive Unmatched board Thanks for confirmation. I can do it. Originally, I want to keep fu740 dts in front of CPU and drivers patch. That means they will be in front of fu740 dts in v7 patch. Hope it's fine for upstream. -- Green > > Thanks, > Rick > > > > > Thanks, > > - > > Green > > > > > > > > LGTM. > > > Other than that, > > > > > > Reviewed-by: Rick Chen > > > > > > > dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb > > > > dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb > > > > > > > > diff --git a/arch/riscv/dts/fu740-c000-u-boot.dtsi b/arch/riscv/dts/fu740-c000-u-boot.dtsi > > > > new file mode 100644 > > > > index 0000000000..a5d0688b06 > > > > --- /dev/null > > > > +++ b/arch/riscv/dts/fu740-c000-u-boot.dtsi > > > > @@ -0,0 +1,105 @@ > > > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > > > +/* > > > > + * (C) Copyright 2020-2021 SiFive, Inc > > > > + */ > > > > + > > > > +#include > > > > + > > > > +/ { > > > > + cpus { > > > > + assigned-clocks = <&prci PRCI_CLK_COREPLL>; > > > > + assigned-clock-rates = <1200000000>; > > > > + u-boot,dm-spl; > > > > + cpu0: cpu at 0 { > > > > + clocks = <&prci PRCI_CLK_COREPLL>; > > > > + u-boot,dm-spl; > > > > + status = "okay"; > > > > + cpu0_intc: interrupt-controller { > > > > + u-boot,dm-spl; > > > > + }; > > > > + }; > > > > + cpu1: cpu at 1 { > > > > + clocks = <&prci PRCI_CLK_COREPLL>; > > > > + u-boot,dm-spl; > > > > + cpu1_intc: interrupt-controller { > > > > + u-boot,dm-spl; > > > > + }; > > > > + }; > > > > + cpu2: cpu at 2 { > > > > + clocks = <&prci PRCI_CLK_COREPLL>; > > > > + u-boot,dm-spl; > > > > + cpu2_intc: interrupt-controller { > > > > + u-boot,dm-spl; > > > > + }; > > > > + }; > > > > + cpu3: cpu at 3 { > > > > + clocks = <&prci PRCI_CLK_COREPLL>; > > > > + u-boot,dm-spl; > > > > + cpu3_intc: interrupt-controller { > > > > + u-boot,dm-spl; > > > > + }; > > > > + }; > > > > + cpu4: cpu at 4 { > > > > + clocks = <&prci PRCI_CLK_COREPLL>; > > > > + u-boot,dm-spl; > > > > + cpu4_intc: interrupt-controller { > > > > + u-boot,dm-spl; > > > > + }; > > > > + }; > > > > + }; > > > > + > > > > + soc { > > > > + u-boot,dm-spl; > > > > + clint: clint at 2000000 { > > > > + compatible = "riscv,clint0"; > > > > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > > > > + &cpu1_intc 3 &cpu1_intc 7 > > > > + &cpu2_intc 3 &cpu2_intc 7 > > > > + &cpu3_intc 3 &cpu3_intc 7 > > > > + &cpu4_intc 3 &cpu4_intc 7>; > > > > + reg = <0x0 0x2000000 0x0 0x10000>; > > > > + u-boot,dm-spl; > > > > + }; > > > > + prci: clock-controller at 10000000 { > > > > + #reset-cells = <1>; > > > > + resets = <&prci PRCI_RST_DDR_CTRL_N>, > > > > + <&prci PRCI_RST_DDR_AXI_N>, > > > > + <&prci PRCI_RST_DDR_AHB_N>, > > > > + <&prci PRCI_RST_DDR_PHY_N>, > > > > + <&prci PRCI_RST_GEMGXL_N>, > > > > + <&prci PRCI_RST_CLTX_N>; > > > > + reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb", > > > > + "ddr_phy", "gemgxl_reset", "cltx_reset"; > > > > + }; > > > > + dmc: dmc at 100b0000 { > > > > + compatible = "sifive,fu740-c000-ddr"; > > > > + reg = <0x0 0x100b0000 0x0 0x0800 > > > > + 0x0 0x100b2000 0x0 0x2000 > > > > + 0x0 0x100b8000 0x0 0x1000>; > > > > + clocks = <&prci PRCI_CLK_DDRPLL>; > > > > + clock-frequency = <933333324>; > > > > + u-boot,dm-spl; > > > > + }; > > > > + }; > > > > +}; > > > > + > > > > +&prci { > > > > + u-boot,dm-spl; > > > > +}; > > > > + > > > > +&uart0 { > > > > + u-boot,dm-spl; > > > > +}; > > > > + > > > > +&spi0 { > > > > + u-boot,dm-spl; > > > > +}; > > > > + > > > > +ð0 { > > > > + assigned-clocks = <&prci PRCI_CLK_GEMGXLPLL>; > > > > + assigned-clock-rates = <125125000>; > > > > +}; > > > > + > > > > +&ccache { > > > > + status = "okay"; > > > > +}; > > > > diff --git a/arch/riscv/dts/fu740-c000.dtsi b/arch/riscv/dts/fu740-c000.dtsi > > > > new file mode 100644 > > > > index 0000000000..0325e51e39 > > > > --- /dev/null > > > > +++ b/arch/riscv/dts/fu740-c000.dtsi > > > > @@ -0,0 +1,329 @@ > > > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > > > +/* Copyright (c) 2020-2021 SiFive, Inc */ > > > > + > > > > +/dts-v1/; > > > > + > > > > +#include > > > > +#include > > > > + > > > > +/ { > > > > + #address-cells = <2>; > > > > + #size-cells = <2>; > > > > + compatible = "sifive,fu740-c000", "sifive,fu740"; > > > > + > > > > + aliases { > > > > + serial0 = &uart0; > > > > + serial1 = &uart1; > > > > + ethernet0 = ð0; > > > > + }; > > > > + > > > > + chosen { > > > > + }; > > > > + > > > > + cpus { > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + cpu0: cpu at 0 { > > > > + compatible = "sifive,bullet0", "riscv"; > > > > + device_type = "cpu"; > > > > + i-cache-block-size = <64>; > > > > + i-cache-sets = <128>; > > > > + i-cache-size = <16384>; > > > > + next-level-cache = <&ccache>; > > > > + reg = <0x0>; > > > > + riscv,isa = "rv64imac"; > > > > + status = "disabled"; > > > > + cpu0_intc: interrupt-controller { > > > > + #interrupt-cells = <1>; > > > > + compatible = "riscv,cpu-intc"; > > > > + interrupt-controller; > > > > + }; > > > > + }; > > > > + cpu1: cpu at 1 { > > > > + compatible = "sifive,bullet0", "riscv"; > > > > + d-cache-block-size = <64>; > > > > + d-cache-sets = <64>; > > > > + d-cache-size = <32768>; > > > > + d-tlb-sets = <1>; > > > > + d-tlb-size = <40>; > > > > + device_type = "cpu"; > > > > + i-cache-block-size = <64>; > > > > + i-cache-sets = <128>; > > > > + i-cache-size = <32768>; > > > > + i-tlb-sets = <1>; > > > > + i-tlb-size = <40>; > > > > + mmu-type = "riscv,sv39"; > > > > + next-level-cache = <&ccache>; > > > > + reg = <0x1>; > > > > + riscv,isa = "rv64imafdc"; > > > > + tlb-split; > > > > + cpu1_intc: interrupt-controller { > > > > + #interrupt-cells = <1>; > > > > + compatible = "riscv,cpu-intc"; > > > > + interrupt-controller; > > > > + }; > > > > + }; > > > > + cpu2: cpu at 2 { > > > > + compatible = "sifive,bullet0", "riscv"; > > > > + d-cache-block-size = <64>; > > > > + d-cache-sets = <64>; > > > > + d-cache-size = <32768>; > > > > + d-tlb-sets = <1>; > > > > + d-tlb-size = <40>; > > > > + device_type = "cpu"; > > > > + i-cache-block-size = <64>; > > > > + i-cache-sets = <128>; > > > > + i-cache-size = <32768>; > > > > + i-tlb-sets = <1>; > > > > + i-tlb-size = <40>; > > > > + mmu-type = "riscv,sv39"; > > > > + next-level-cache = <&ccache>; > > > > + reg = <0x2>; > > > > + riscv,isa = "rv64imafdc"; > > > > + tlb-split; > > > > + cpu2_intc: interrupt-controller { > > > > + #interrupt-cells = <1>; > > > > + compatible = "riscv,cpu-intc"; > > > > + interrupt-controller; > > > > + }; > > > > + }; > > > > + cpu3: cpu at 3 { > > > > + compatible = "sifive,bullet0", "riscv"; > > > > + d-cache-block-size = <64>; > > > > + d-cache-sets = <64>; > > > > + d-cache-size = <32768>; > > > > + d-tlb-sets = <1>; > > > > + d-tlb-size = <40>; > > > > + device_type = "cpu"; > > > > + i-cache-block-size = <64>; > > > > + i-cache-sets = <128>; > > > > + i-cache-size = <32768>; > > > > + i-tlb-sets = <1>; > > > > + i-tlb-size = <40>; > > > > + mmu-type = "riscv,sv39"; > > > > + next-level-cache = <&ccache>; > > > > + reg = <0x3>; > > > > + riscv,isa = "rv64imafdc"; > > > > + tlb-split; > > > > + cpu3_intc: interrupt-controller { > > > > + #interrupt-cells = <1>; > > > > + compatible = "riscv,cpu-intc"; > > > > + interrupt-controller; > > > > + }; > > > > + }; > > > > + cpu4: cpu at 4 { > > > > + compatible = "sifive,bullet0", "riscv"; > > > > + d-cache-block-size = <64>; > > > > + d-cache-sets = <64>; > > > > + d-cache-size = <32768>; > > > > + d-tlb-sets = <1>; > > > > + d-tlb-size = <40>; > > > > + device_type = "cpu"; > > > > + i-cache-block-size = <64>; > > > > + i-cache-sets = <128>; > > > > + i-cache-size = <32768>; > > > > + i-tlb-sets = <1>; > > > > + i-tlb-size = <40>; > > > > + mmu-type = "riscv,sv39"; > > > > + next-level-cache = <&ccache>; > > > > + reg = <0x4>; > > > > + riscv,isa = "rv64imafdc"; > > > > + tlb-split; > > > > + cpu4_intc: interrupt-controller { > > > > + #interrupt-cells = <1>; > > > > + compatible = "riscv,cpu-intc"; > > > > + interrupt-controller; > > > > + }; > > > > + }; > > > > + }; > > > > + soc { > > > > + #address-cells = <2>; > > > > + #size-cells = <2>; > > > > + compatible = "sifive,fu740-c000", "sifive,fu740", "simple-bus"; > > > > + ranges; > > > > + plic0: interrupt-controller at c000000 { > > > > + #interrupt-cells = <1>; > > > > + compatible = "sifive,plic-1.0.0"; > > > > + reg = <0x0 0xc000000 0x0 0x4000000>; > > > > + riscv,ndev = <69>; > > > > + interrupt-controller; > > > > + interrupts-extended = < > > > > + &cpu0_intc 0xffffffff > > > > + &cpu1_intc 0xffffffff &cpu1_intc 9 > > > > + &cpu2_intc 0xffffffff &cpu2_intc 9 > > > > + &cpu3_intc 0xffffffff &cpu3_intc 9 > > > > + &cpu4_intc 0xffffffff &cpu4_intc 9>; > > > > + }; > > > > + prci: clock-controller at 10000000 { > > > > + compatible = "sifive,fu740-c000-prci"; > > > > + reg = <0x0 0x10000000 0x0 0x1000>; > > > > + clocks = <&hfclk>, <&rtcclk>; > > > > + #clock-cells = <1>; > > > > + #reset-cells = <1>; > > > > + }; > > > > + uart0: serial at 10010000 { > > > > + compatible = "sifive,fu740-c000-uart", "sifive,uart0"; > > > > + reg = <0x0 0x10010000 0x0 0x1000>; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <39>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + status = "disabled"; > > > > + }; > > > > + uart1: serial at 10011000 { > > > > + compatible = "sifive,fu740-c000-uart", "sifive,uart0"; > > > > + reg = <0x0 0x10011000 0x0 0x1000>; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <40>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + status = "disabled"; > > > > + }; > > > > + i2c0: i2c at 10030000 { > > > > + compatible = "sifive,fu740-c000-i2c", "sifive,i2c0"; > > > > + reg = <0x0 0x10030000 0x0 0x1000>; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <52>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + reg-shift = <2>; > > > > + reg-io-width = <1>; > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + status = "disabled"; > > > > + }; > > > > + i2c1: i2c at 10031000 { > > > > + compatible = "sifive,fu740-c000-i2c", "sifive,i2c0"; > > > > + reg = <0x0 0x10031000 0x0 0x1000>; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <53>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + reg-shift = <2>; > > > > + reg-io-width = <1>; > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + status = "disabled"; > > > > + }; > > > > + qspi0: spi at 10040000 { > > > > + compatible = "sifive,fu740-c000-spi", "sifive,spi0"; > > > > + reg = <0x0 0x10040000 0x0 0x1000 > > > > + 0x0 0x20000000 0x0 0x10000000>; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <41>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + status = "disabled"; > > > > + }; > > > > + qspi1: spi at 10041000 { > > > > + compatible = "sifive,fu740-c000-spi", "sifive,spi0"; > > > > + reg = <0x0 0x10041000 0x0 0x1000 > > > > + 0x0 0x30000000 0x0 0x10000000>; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <42>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + status = "disabled"; > > > > + }; > > > > + spi0: spi at 10050000 { > > > > + compatible = "sifive,fu740-c000-spi", "sifive,spi0"; > > > > + reg = <0x0 0x10050000 0x0 0x1000>; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <43>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + status = "disabled"; > > > > + }; > > > > + eth0: ethernet at 10090000 { > > > > + compatible = "sifive,fu740-c000-gem"; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <55>; > > > > + reg = <0x0 0x10090000 0x0 0x2000 > > > > + 0x0 0x100a0000 0x0 0x1000>; > > > > + local-mac-address = [00 00 00 00 00 00]; > > > > + clock-names = "pclk", "hclk"; > > > > + clocks = <&prci PRCI_CLK_GEMGXLPLL>, > > > > + <&prci PRCI_CLK_GEMGXLPLL>; > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + status = "disabled"; > > > > + }; > > > > + pwm0: pwm at 10020000 { > > > > + compatible = "sifive,fu740-c000-pwm", "sifive,pwm0"; > > > > + reg = <0x0 0x10020000 0x0 0x1000>; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <44 45 46 47>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + #pwm-cells = <3>; > > > > + status = "disabled"; > > > > + }; > > > > + pwm1: pwm at 10021000 { > > > > + compatible = "sifive,fu740-c000-pwm", "sifive,pwm0"; > > > > + reg = <0x0 0x10021000 0x0 0x1000>; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <48 49 50 51>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + #pwm-cells = <3>; > > > > + status = "disabled"; > > > > + }; > > > > + ccache: cache-controller at 2010000 { > > > > + compatible = "sifive,fu740-c000-ccache", "cache"; > > > > + cache-block-size = <64>; > > > > + cache-level = <2>; > > > > + cache-sets = <2048>; > > > > + cache-size = <2097152>; > > > > + cache-unified; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <19 21 22 20>; > > > > + reg = <0x0 0x2010000 0x0 0x1000>; > > > > + }; > > > > + gpio: gpio at 10060000 { > > > > + compatible = "sifive,fu740-c000-gpio", "sifive,gpio0"; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, > > > > + <30>, <31>, <32>, <33>, <34>, <35>, <36>, > > > > + <37>, <38>; > > > > + reg = <0x0 0x10060000 0x0 0x1000>; > > > > + gpio-controller; > > > > + #gpio-cells = <2>; > > > > + interrupt-controller; > > > > + #interrupt-cells = <2>; > > > > + clocks = <&prci PRCI_CLK_PCLK>; > > > > + status = "disabled"; > > > > + }; > > > > + pcie at e00000000 { > > > > + #address-cells = <3>; > > > > + #interrupt-cells = <1>; > > > > + #num-lanes = <8>; > > > > + #size-cells = <2>; > > > > + compatible = "sifive,fu740-pcie"; > > > > + reg = <0xe 0x00000000 0x1 0x0 > > > > + 0xd 0xf0000000 0x0 0x10000000 > > > > + 0x0 0x100d0000 0x0 0x1000>; > > > > + reg-names = "dbi", "config", "mgmt"; > > > > + device_type = "pci"; > > > > + dma-coherent; > > > > + bus-range = <0x0 0xff>; > > > > + ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000 > > > > + 0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000 > > > > + 0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000 > > > > + 0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; > > > > + num-lanes = <0x8>; > > > > + interrupts = <56 57 58 59 60 61 62 63 64>; > > > > + interrupt-names = "msi", "inta", "intb", "intc", "intd"; > > > > + interrupt-parent = <&plic0>; > > > > + interrupt-map-mask = <0x0 0x0 0x0 0x7>; > > > > + interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>, > > > > + <0x0 0x0 0x0 0x2 &plic0 58>, > > > > + <0x0 0x0 0x0 0x3 &plic0 59>, > > > > + <0x0 0x0 0x0 0x4 &plic0 60>; > > > > + pwren-gpios = <&gpio 5 0>; > > > > + perstn-gpios = <&gpio 8 0>; > > > > + clocks = <&prci PRCI_CLK_PCIEAUX>; > > > > + clock-names = "pcieaux"; > > > > + resets = <&prci PRCI_RST_PCIE_POWER_UP_N>; > > > > + reset-names = "rst_n"; > > > > + > > > > + status = "okay"; > > > > + }; > > > > + }; > > > > +}; > > > > diff --git a/include/dt-bindings/clock/sifive-fu740-prci.h b/include/dt-bindings/clock/sifive-fu740-prci.h > > > > new file mode 100644 > > > > index 0000000000..c1224783c0 > > > > --- /dev/null > > > > +++ b/include/dt-bindings/clock/sifive-fu740-prci.h > > > > @@ -0,0 +1,25 @@ > > > > +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ > > > > +/* > > > > + * Copyright (C) 2020-2021 SiFive, Inc. > > > > + * Wesley Terpstra > > > > + * Paul Walmsley > > > > + * Zong Li > > > > + * Pragnesh Patel > > > > + */ > > > > + > > > > +#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H > > > > +#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H > > > > + > > > > +/* Clock indexes for use by Device Tree data and the PRCI driver */ > > > > + > > > > +#define PRCI_CLK_COREPLL 0 > > > > +#define PRCI_CLK_DDRPLL 1 > > > > +#define PRCI_CLK_GEMGXLPLL 2 > > > > +#define PRCI_CLK_DVFSCOREPLL 3 > > > > +#define PRCI_CLK_HFPCLKPLL 4 > > > > +#define PRCI_CLK_CLTXPLL 5 > > > > +#define PRCI_CLK_TLCLK 6 > > > > +#define PRCI_CLK_PCLK 7 > > > > +#define PRCI_CLK_PCIEAUX 8 > > > > + > > > > +#endif > > > > diff --git a/include/dt-bindings/reset/sifive-fu740-prci.h b/include/dt-bindings/reset/sifive-fu740-prci.h > > > > new file mode 100644 > > > > index 0000000000..02210f4105 > > > > --- /dev/null > > > > +++ b/include/dt-bindings/reset/sifive-fu740-prci.h > > > > @@ -0,0 +1,19 @@ > > > > +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ > > > > +/* > > > > + * Copyright (C) 2020-2021 Sifive, Inc. > > > > + * Author: Pragnesh Patel > > > > + */ > > > > + > > > > +#ifndef __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H > > > > +#define __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H > > > > + > > > > +/* Reset indexes for use by device tree data and the PRCI driver */ > > > > +#define PRCI_RST_DDR_CTRL_N 0 > > > > +#define PRCI_RST_DDR_AXI_N 1 > > > > +#define PRCI_RST_DDR_AHB_N 2 > > > > +#define PRCI_RST_DDR_PHY_N 3 > > > > +#define PRCI_RST_PCIE_POWER_UP_N 4 > > > > +#define PRCI_RST_GEMGXL_N 5 > > > > +#define PRCI_RST_CLTX_N 6 > > > > + > > > > +#endif > > > > -- > > > > 2.31.0