Is this what you are looking for?
http://arago-project.org/git/?p=meta-arago.git;a=blob;f= meta-arago-distro/recipes- graphics/wayland/weston/0001- udev-seat-restrict-udev- enumeration-to-card0.patch;hb= HEAD
BTW, you don't need mesa at all, just libgbm, but it requires some massaging
with PREFERRED_PROVIDERs and bbappends to get it going for now, although
there's been some discussion to get it fixed upstream in the future...
--
Denys
On Mon, Oct 10, 2016 at 04:26:59PM -0400, Simon Pelletier-Thibault wrote:
> Hi Eric, Denys
>
> Thank you for answering.
>
> I tried the following:
> root@beaglebone:~# gles1test1
> PVR:(Error): WSEGL_CreateWindowDrawable: Couldn't set CRTC: Invalid
> argument [0, ]
> 'eglCreateWindowSurface' returned egl error 'EGL_BAD_ALLOC' (0x3003)
> root@beaglebone:~# gles2test1
> --------------------- started ---------------------
> PVR:(Error): WSEGL_CreateWindowDrawable: Couldn't set CRTC: Invalid
> argument [0, ]
> 'eglCreateWindowSurface' returned egl error 'EGL_BAD_ALLOC' (0x3003)
>
> I also try other configurations, like core-image-weston. After "adjusting"
> mesa so it won't install gbm, weston won't boot and I still errors.
>
> here the weston output:
> starting with no config
> Loding module/usr/lib/weston/drm-backend.so
> output repaint windows is 7 ms maximun
> initilizing drm backend
> using /dev/dri/card0
> Loading module /usr/lib/weston/gl-rendered.so
> ...
> loaded module: found gbm_pvr.so
> found valid GBM backend : gbm_pvr.so
> warning no EGL_EXT_platform_base support of specific platform; failling
> back to eglGetDisplay
> failed to choose EGL config
> failed to initialize egl
> fatal: failed to create compositor backend
>
>
> I think the problem is around the drm thing. I'm not an expert but:
> when I look at /dev/dri/*, I see 2 card ( as if there is 2 drm driver)
> root@beaglebone:~# ls -lsa /dev/dri/
> 0 drwxr-xr-x 2 root root 120 Jan 1 1970 .
> 0 drwxr-xr-x 11 root root 13160 Oct 6 04:22 ..
> 0 crw-rw---- 1 root video 226, 0 Jan 1 1970 card0
> 0 crw-rw---- 1 root video 226, 1 Jan 1 1970 card1
> 0 crw-rw---- 1 root video 226, 64 Jan 1 1970 controlD64
> 0 crw-rw---- 1 root video 226, 128 Jan 1 1970 renderD128
>
>
> also
> root@beaglebone:~# ls -lsa /sys/class/drm/card0/device/driver
> 0 lrwxrwxrwx 1 root root 0 Oct 6 04:31
> /sys/class/drm/card0/device/driver ->
> ../../../../bus/platform/drivers/tilcdc
> root@beaglebone:~# ls -lsa /sys/class/drm/card1/device/driver
> 0 lrwxrwxrwx 1 root root 0 Oct 6 04:35
> /sys/class/drm/card1/device/driver ->
> ../../../../bus/platform/drivers/pvrsrvkm
>
> 1. So it sound that there is 2 drm drivers is it normal?
> 2. Should I change the device three to remove tilcdc, so the only drm
> driver will be pvrsrvkm?
> 3. Is there something to do to ensure libdrm use the SGX driver?
>
>
> On Mon, Oct 10, 2016 at 10:27 AM, Denys Dmytriyenko <denys@ti.com> wrote:
>
> > FYI, that is not part of meta-ti - both kmscube and SGX demos are part of
> > meta-arago application layer, not meta-ti BSP layer.
> >
> > --
> > Denys
> >
> >
> > On Mon, Oct 10, 2016 at 02:19:22PM +0000, Ruei, Eric wrote:
> > > Hi, Simon:
> > >
> > > Most of the SGX test programs including sgx_init_test will not work
> > anymore because we have switched to DRM-based EGL Window Systems.
> > > Have you tried other SGX test programs at the file system?
> > >
> > > - Weston?
> > >
> > > - QT programs ion top of Weston?
> > >
> > > - Without Weston
> > >
> > > o Kmscube
> > >
> > > o /usr/bin/SGX/demos/Raw/ OGLES2ChameleonMan
> > >
> > > o …
> > >
> > > Best regards,
> > >
> > > Eric
> > > From: meta-ti-bounces@yoctoproject.org [mailto:meta-ti-bounces@
> > yoctoproject.org] On Behalf Of Simon Pelletier-Thibault
> > > Sent: Friday, October 07, 2016 9:49 PM
> > > To: meta-ti@yoctoproject.org
> > > Subject: [meta-ti] BeagleBone Black - ti-sgx-ddk not working on yocto
> > Krogoth, what is missing
> > >
> > > Hi,
> > > I'm trying to use sgx driver for EGL application on BeagleBone Black. I
> > build a minimal image to test it and it is not working.
> > > I got this:
> > > root@beaglebone:~# sgx_init_test
> > > ----------------------- Start -----------------------
> > > Try calling PVRSRVConnect with an invalid argument:
> > > PVR:(Error): PVRSRVConnect: Invalid connection. [0, ]
> > > PVR:(Error): PVRSRVConnect: Unable to open connection. [0, ]
> > > OK
> > > Call PVRSRVConnect with a valid argument:
> > > OK
> > > Try calling PVRSRVEnumerateDevices with invalid puiNumDevices:
> > > PVR:(Error): PVRSRVEnumerateDevices: Invalid params [0, ]
> > > OK
> > > Get number of devices from PVRSRVEnumerateDevices:
> > > OK
> > > .... Reported 1 devices
> > > .... Device Number | Device Type
> > > 0000 | PVRSRV_DEVICE_ID_SGX
> > > Attempt to acquire device 0:
> > > OK
> > > Getting SGX Client info
> > > OK
> > > .... ui32ProcessID:266
> > > Display Class API: enumerate devices
> > > OK
> > > PVRSRVEnumerateDeviceClass() returns 0 display device(s)
> > > FAIL - PVRSRV_ERROR_NO_DC_DEVICES_FOUND
> > > -----
> > > Here my configuration:
> > > bblayes.conf:
> > > POKY_BBLAYERS_CONF_VERSION = "2"
> > >
> > > BBPATH = "${TOPDIR}"
> > > BBFILES ?= ""
> > >
> > > BBLAYERS ?= " \
> > > /path/poky2.1/meta \
> > > /path/poky2.1/meta-poky \
> > > /path/meta-ti2 \
> > > "
> > > -----
> > >
> > > local.conf:
> > > PACKAGECONFIG_append_pn-qemu-native = " sdl"
> > > PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
> > > CONF_VERSION = "1"
> > >
> > > PREFERRED_PROVIDER_virtual/egl = "ti-sgx-ddk-um"
> > > PREFERRED_PROVIDER_virtual/libgles1 = "ti-sgx-ddk-um"
> > > PREFERRED_PROVIDER_virtual/libgles2 = "ti-sgx-ddk-um"
> > >
> > > IMAGE_INSTALL_append_pn-core-image-minimal = " packagegroup-base-vfat
> > packagegroup-base-usbhost dropbear linux-firmware ti-sgx-ddk-km
> > ti-sgx-ddk-um libdrm"
> > >
> > > -----
> > > What am I missing?
> > >
> > > I try other configurations, like core-image-weston. After "adjusting"
> > mesa so it won't install gbm, weston won't boot and I still get the
> > previous error.
> > > Thank you.
> > > Simon
> > >
> >
> > > --
> > > _______________________________________________
> > > meta-ti mailing list
> > > meta-ti@yoctoproject.org
> > > https://lists.yoctoproject.org/listinfo/meta-ti
> >
> >