RE: [PATCH v11 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC

[Khalil Blaiech <kblaiech@nvidia.com>]

> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: Tuesday, September 22, 2020 7:05 PM
> To: Khalil Blaiech <kblaiech@nvidia.com>
> Cc: Linux I2C <linux-i2c@vger.kernel.org>; Khalil Blaiech
> <kblaiech@mellanox.com>; Vadim Pasternak <vadimp@mellanox.com>
> Subject: Re: [PATCH v11 2/2] dt-bindings: i2c: I2C binding for Mellanox
> BlueField SoC
> 
> On Tue, Sep 22, 2020 at 4:49 PM Khalil Blaiech <kblaiech@nvidia.com> wrote:
> >
> > From: Khalil Blaiech <kblaiech@mellanox.com>
> 
> Use scripts/get_maintainers.pl and send to the right lists/people.
> Specifically, this needs to go to the DT list to get in my queue.

Understood!
Sorry about that.

> 
> >
> > Add device tree bindings documentation for Mellanox BlueField
> > I2C SMBus controller.
> >
> > Signed-off-by: Khalil Blaiech <kblaiech@mellanox.com>
> > ---
> > v5->v6:
> >         - Adding description of an extra resource to be
> >         consistent with new BlueField-2 SoCs.
> >         - Adding an additional example of device instance.
> > v3->v4:
> >         - Re-ordering of the property descriptions.
> >         - Removing useless register addresses from the
> >         resource description.
> >         - Definition of default clock-frequency value.
> >         - Fixing format issues; removing spaces.
> >         - Removing "aliases" from Example section.
> >         - Renaming device instance node in Example section.
> > v2->v3:
> >         - Removing shared resources from the controller
> >         instance.
> >         - Updating the 'compatible' property and support the
> >         second generation of the Mellanox BlueField SoC.
> >         - Fixing file format; replacing spaces with tabs.
> > v1->v2:
> >         - Enumeration of the device resources.
> >         - Updating the 'compatible' property to make it less
> >         generic.
> >         - Removing the 'bus' index property and replace it with
> >         standard approach to read the bus identifier.
> >         - Getting rid of the 'profile' property.
> >         - Using 'clock-frequency' property instead of 'bus-freq'.
> >         - Convertion of the clock frequency from KHz to Hz.
> >         - Removing useless examples.
> > ---
> >  .../devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt | 42
> ++++++++++++++++++++++
> >  1 file changed, 42 insertions(+)
> >  create mode 100644
> Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
> 
> Sorry, but DT bindings are now in DT schema format.

Got it.

> 
> Rob

Thanks,
-Khalil