From: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] configs: Unset CONFIG_SPI_BAR for all LS1046A defconfigs
Date: Wed, 22 May 2019 12:33:07 +0000 [thread overview]
Message-ID: <VI1PR0402MB3854EE5F6007BA8AF43D839B97000@VI1PR0402MB3854.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20190424124512.25138-2-rajat.srivastava@nxp.com>
> -----Original Message-----
> From: Rajat Srivastava <rajat.srivastava@nxp.com>
> Sent: Wednesday, April 24, 2019 6:15 PM
> To: u-boot at lists.denx.de; Prabhakar Kushwaha
> <prabhakar.kushwaha@nxp.com>
> Cc: Rajat Srivastava <rajat.srivastava@nxp.com>
> Subject: [PATCH 2/3] configs: Unset CONFIG_SPI_BAR for all LS1046A defconfigs
>
> Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
> ---
> configs/ls1046aqds_qspi_defconfig | 1 +
> configs/ls1046aqds_sdcard_qspi_defconfig | 1 +
> configs/ls1046aqds_tfa_defconfig | 1 +
> configs/ls1046ardb_emmc_defconfig | 1 +
> configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 1 +
> configs/ls1046ardb_qspi_defconfig | 1 +
> configs/ls1046ardb_qspi_spl_defconfig | 1 +
> configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 1 +
> configs/ls1046ardb_sdcard_defconfig | 1 +
> configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 1 +
> configs/ls1046ardb_tfa_defconfig | 1 +
> 11 files changed, 11 insertions(+)
>
> diff --git a/configs/ls1046aqds_qspi_defconfig
> b/configs/ls1046aqds_qspi_defconfig
> index 4cc19fe7ac..1e9a6c7480 100644
> --- a/configs/ls1046aqds_qspi_defconfig
> +++ b/configs/ls1046aqds_qspi_defconfig
> @@ -12,6 +12,7 @@ CONFIG_BOOTDELAY=10
> CONFIG_USE_BOOTARGS=y
> CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0
> earlycon=uart8250,mmio,0x21c0500
> mtdparts=1550000.quadspi:2m(uboot),14m(free)"
> # CONFIG_USE_BOOTCOMMAND is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_MISC_INIT_R=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GREPENV=y
> diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig
> b/configs/ls1046aqds_sdcard_qspi_defconfig
> index a7620d23ad..180a36c952 100644
> --- a/configs/ls1046aqds_sdcard_qspi_defconfig
> +++ b/configs/ls1046aqds_sdcard_qspi_defconfig
> @@ -19,6 +19,7 @@ CONFIG_BOOTDELAY=10
> CONFIG_USE_BOOTARGS=y
> CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0
> earlycon=uart8250,mmio,0x21c0500
> mtdparts=1550000.quadspi:2m(uboot),14m(free)"
> # CONFIG_USE_BOOTCOMMAND is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_MISC_INIT_R=y
> CONFIG_SPL_BOARD_INIT=y
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> diff --git a/configs/ls1046aqds_tfa_defconfig
> b/configs/ls1046aqds_tfa_defconfig
> index ede5df6224..60a7b13205 100644
> --- a/configs/ls1046aqds_tfa_defconfig
> +++ b/configs/ls1046aqds_tfa_defconfig
> @@ -13,6 +13,7 @@ CONFIG_BOOTDELAY=10
> CONFIG_USE_BOOTARGS=y
> CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0
> earlycon=uart8250,mmio,0x21c0500
> mtdparts=60000000.nor:2m at 0x100000(nor_bank0_uboot),40m at 0x1100000(n
> or_bank0_fit),7m(nor_bank0_user),2m at 0x4100000(nor_bank4_uboot),40m at 0
> x5100000(nor_bank4_fit),-
> (nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nan
> d_free);spi0.0:2m(uboot),14m(free)"
> # CONFIG_USE_BOOTCOMMAND is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_MISC_INIT_R=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_IMLS=y
> diff --git a/configs/ls1046ardb_emmc_defconfig
> b/configs/ls1046ardb_emmc_defconfig
> index 4b45289869..cdad734fc9 100644
> --- a/configs/ls1046ardb_emmc_defconfig
> +++ b/configs/ls1046ardb_emmc_defconfig
> @@ -19,6 +19,7 @@ CONFIG_BOOTDELAY=10
> CONFIG_USE_BOOTARGS=y
> CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0
> earlycon=uart8250,mmio,0x21c0500
> mtdparts=1550000.quadspi:1m(rcw),15m(u-
> boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448
> m(nand_free)"
> # CONFIG_USE_BOOTCOMMAND is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_MISC_INIT_R=y
> CONFIG_SPL_BOARD_INIT=y
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
> b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
> index 27309bfa33..882170c9f7 100644
> --- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
> +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
> @@ -32,6 +32,7 @@ CONFIG_DM_MMC=y
> CONFIG_FSL_ESDHC=y
> CONFIG_SPI_FLASH=y
> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_PHYLIB=y
> CONFIG_PHY_AQUANTIA=y
> CONFIG_E1000=y
> diff --git a/configs/ls1046ardb_qspi_defconfig
> b/configs/ls1046ardb_qspi_defconfig
> index d2850480d6..48b44a87a1 100644
> --- a/configs/ls1046ardb_qspi_defconfig
> +++ b/configs/ls1046ardb_qspi_defconfig
> @@ -33,6 +33,7 @@ CONFIG_DM_MMC=y
> CONFIG_FSL_ESDHC=y
> CONFIG_SPI_FLASH=y
> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_PHYLIB=y
> CONFIG_PHY_AQUANTIA=y
> CONFIG_E1000=y
> diff --git a/configs/ls1046ardb_qspi_spl_defconfig
> b/configs/ls1046ardb_qspi_spl_defconfig
> index 975cc580bd..c10a007fcc 100644
> --- a/configs/ls1046ardb_qspi_spl_defconfig
> +++ b/configs/ls1046ardb_qspi_spl_defconfig
> @@ -40,6 +40,7 @@ CONFIG_CMD_CACHE=y
> CONFIG_MP=y
> CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-
> boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448
> m(nand_free)"
> # CONFIG_SPL_EFI_PARTITION is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
> b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
> index 643a52039a..eb50146b33 100644
> --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
> +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
> @@ -38,6 +38,7 @@ CONFIG_CMD_CACHE=y
> CONFIG_MP=y
> CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-
> boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448
> m(nand_free)"
> # CONFIG_SPL_EFI_PARTITION is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
> CONFIG_DM=y
> diff --git a/configs/ls1046ardb_sdcard_defconfig
> b/configs/ls1046ardb_sdcard_defconfig
> index a7624967cf..f6b8253c51 100644
> --- a/configs/ls1046ardb_sdcard_defconfig
> +++ b/configs/ls1046ardb_sdcard_defconfig
> @@ -37,6 +37,7 @@ CONFIG_CMD_CACHE=y
> CONFIG_MP=y
> CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-
> boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448
> m(nand_free)"
> # CONFIG_SPL_EFI_PARTITION is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
> CONFIG_ENV_IS_IN_MMC=y
> diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
> b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
> index 93efb5c3a9..90ae7a6bd1 100644
> --- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
> +++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
> @@ -33,6 +33,7 @@ CONFIG_DM_MMC=y
> CONFIG_FSL_ESDHC=y
> CONFIG_SPI_FLASH=y
> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_PHYLIB=y
> CONFIG_PHY_AQUANTIA=y
> CONFIG_E1000=y
> diff --git a/configs/ls1046ardb_tfa_defconfig
> b/configs/ls1046ardb_tfa_defconfig
> index c86e182459..47901de505 100644
> --- a/configs/ls1046ardb_tfa_defconfig
> +++ b/configs/ls1046ardb_tfa_defconfig
> @@ -35,6 +35,7 @@ CONFIG_DM_MMC=y
> CONFIG_FSL_ESDHC=y
> CONFIG_SPI_FLASH=y
> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +# CONFIG_SPI_FLASH_BAR is not set
> CONFIG_PHYLIB=y
> CONFIG_PHY_AQUANTIA=y
> CONFIG_E1000=y
> --
> 2.17.1
next prev parent reply other threads:[~2019-05-22 12:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-24 12:45 [U-Boot] [PATCH 1/3] configs: Unset CONFIG_SPI_BAR for all LS1088A defconfigs Rajat Srivastava
2019-04-24 12:45 ` [U-Boot] [PATCH 2/3] configs: Unset CONFIG_SPI_BAR for all LS1046A defconfigs Rajat Srivastava
2019-05-22 12:33 ` Prabhakar Kushwaha [this message]
2019-05-22 12:33 ` Prabhakar Kushwaha
2019-04-24 12:45 ` [U-Boot] [PATCH 3/3] configs: Unset CONFIG_SPI_BAR for all LS2080A/LS2081A defconfigs Rajat Srivastava
2019-05-22 12:33 ` Prabhakar Kushwaha
2019-05-22 12:33 ` [U-Boot] [PATCH 1/3] configs: Unset CONFIG_SPI_BAR for all LS1088A defconfigs Prabhakar Kushwaha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VI1PR0402MB3854EE5F6007BA8AF43D839B97000@VI1PR0402MB3854.eurprd04.prod.outlook.com \
--to=prabhakar.kushwaha@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.