From: Stefano Stabellini <sstabellini@kernel.org>
To: Stefano Stabellini <sstabellini@kernel.org>
Cc: george.dunlap@eu.citrix.com, edgar.iglesias@xilinx.com,
Dario Faggioli <dario.faggioli@citrix.com>,
julien.grall@arm.com, xen-devel@lists.xen.org
Subject: Re: Xen on ARM IRQ latency and scheduler overhead
Date: Thu, 16 Feb 2017 15:07:00 -0800 (PST) [thread overview]
Message-ID: <alpine.DEB.2.10.1702161439490.9566@sstabellini-ThinkPad-X260> (raw)
In-Reply-To: <alpine.DEB.2.10.1702161147010.9566@sstabellini-ThinkPad-X260>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1326 bytes --]
On Thu, 16 Feb 2017, Stefano Stabellini wrote:
> > > > > AVG MIN MAX WARM MAX
> > > > >
> > > > > NODEBUG no WFI 1890 1800 3170 2070
> > > > > NODEBUG WFI 4850 4810 7030 4980
> > > > > NODEBUG no WFI credit2 2217 2090 3420 2650
> > > > > NODEBUG WFI credit2 8080 7890 10320 8300
> > > > >
> > > > > DEBUG no WFI 2252 2080 3320 2650
> > > > > DEBUG WFI 6500 6140 8520 8130
> > > > > DEBUG WFI, credit2 8050 7870 10680 8450
> > > > >
> > > > > DEBUG means Xen DEBUG build.
> > > > >
> > [...]
> > > > > As you can see, depending on whether the guest issues a WFI or
> > > > > not
> > > > > while
> > > > > waiting for interrupts, the results change significantly.
> > > > > Interestingly,
> > > > > credit2 does worse than credit1 in this area.
> > > > >
> > > > This is with current staging right?
> > >
> > > That's right.
> > >
> > So, when you have the chance, can I see the output of
> >
> > xl debug-key r
> > xl dmesg
> >
> > Both under Credit1 and Credit2?
>
> I'll see what I can do.
See attached.
[-- Attachment #2: Type: TEXT/PLAIN, Size: 35358 bytes --]
(XEN) Xen version 4.9-unstable (sstabellini@) (aarch64-linux-gnu-gcc (Linaro GCC 2014.05) 4.9.1 20140422 (prerelease)) debug=y Thu Feb 16 14:39:21 PST 2017
(XEN) Latest ChangeSet: Thu Feb 16 14:39:16 2017 -0800 git:4e0ef4d
(XEN) Processor: 410fd034: "ARM Limited", variant: 0x0, part 0xd03, rev 0x4
(XEN) 64-bit Execution:
(XEN) Processor Features: 0000000000002222 0000000000000000
(XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32
(XEN) Extensions: FloatingPoint AdvancedSIMD
(XEN) Debug Features: 0000000010305106 0000000000000000
(XEN) Auxiliary Features: 0000000000000000 0000000000000000
(XEN) Memory Model Features: 0000000000001122 0000000000000000
(XEN) ISA Features: 0000000000011120 0000000000000000
(XEN) 32-bit Execution:
(XEN) Processor Features: 00000131:00011011
(XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle
(XEN) Extensions: GenericTimer Security
(XEN) Debug Features: 03010066
(XEN) Auxiliary Features: 00000000
(XEN) Memory Model Features: 10201105 40000000 01260000 02102211
(XEN) ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121
(XEN) Using PSCI-1.0 for SMP bringup
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 99998 KHz
(XEN) GICv2 initialization:
(XEN) gic_dist_addr=00000000f9010000
(XEN) gic_cpu_addr=00000000f9020000
(XEN) gic_hyp_addr=00000000f9040000
(XEN) gic_vcpu_addr=00000000f9060000
(XEN) gic_maintenance_irq=25
(XEN) GICv2: Adjusting CPU interface base to 0xf902f000
(XEN) GICv2: 192 lines, 4 cpus, secure (IID 0200143b).
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ26 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ27 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ30 as Edge-triggered. H/w forces to Level-triggered.
(XEN) Could not find scheduler: credit1
(XEN) Using 'SMP Credit Scheduler' (credit)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Allocated console ring of 32 KiB.
(XEN) Bringing up CPU1
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ26 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ27 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ30 as Edge-triggered. H/w forces to Level-triggered.
(XEN) CPU 1 booted.
(XEN) Bringing up CPU2
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ26 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ27 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ30 as Edge-triggered. H/w forces to Level-triggered.
(XEN) CPU 2 booted.
(XEN) Bringing up CPU3
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ26 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ27 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ30 as Edge-triggered. H/w forces to Level-triggered.
(XEN) CPU 3 booted.
(XEN) Brought up 4 CPUs
(XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID
(XEN) P2M: 3 levels with order-1 root, VTCR 0x80023558
(XEN) smmu: /amba/smmu@fd800000: probing hardware configuration...
(XEN) smmu: /amba/smmu@fd800000: SMMUv2 with:
(XEN) smmu: /amba/smmu@fd800000: stage 2 translation
(XEN) smmu: /amba/smmu@fd800000: stream matching with 48 register groups, mask 0x7fff
(XEN) smmu: /amba/smmu@fd800000: 16 context banks (0 stage-2 only)
(XEN) smmu: /amba/smmu@fd800000: Stage-2: 40-bit IPA -> 48-bit PA
(XEN) smmu: /amba/smmu@fd800000: registered 26 master devices
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) build-id: 3162bd9a1aaa9749ea1c5a484a7062f60ea73550
(XEN) alternatives: Patching with alt table 00000000400f3c38 -> 00000000400f3fec
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading kernel from boot module @ 0000000000080000
(XEN) Loading ramdisk from boot module @ 00000000060af000
(XEN) Allocating 1:1 mappings totalling 1024MB for dom0:
(XEN) BANK[0] 0x00000040000000-0x00000080000000 (1024MB)
(XEN) Grant table range: 0x0000087fe00000-0x0000087fe61000
(XEN) smmu: /amba/smmu@fd800000: d0: p2maddr 0x000000087ff68000
(XEN) Loading zImage from 0000000000080000 to 0000000040080000-0000000043180000
(XEN) Loading dom0 initrd from 00000000060af000 to 0x0000000048200000-0x000000004a150400
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading dom0 DTB to 0x0000000048000000-0x0000000048006c4a
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 296kB init memory.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.0-xilinx (xbrbbot@xcosswbld01) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP Thu Dec 15 18:01:07 MST 2016
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: xen0 at I/O port 0x0 (options '')
[ 0.000000] bootconsole [xen0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] Xen 4.9 support found
[ 0.000000] percpu: Embedded 20 pages/cpu @ffffffc037f73000 s42240 r8192 d31488 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258560
[ 0.000000] Kernel command line: console=hvc0 earlycon=xen earlyprintk=xen maxcpus=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0x72e00000-0x76e00000] (64MB) mapped at [ffffffc032e00000-ffffffc036dfffff]
[ 0.000000] Memory: 790568K/1048576K available (8136K kernel code, 561K rwdata, 2860K rodata, 460K init, 374K bss, 126936K reserved, 131072K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdffff0000 ( 247 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008870000 ( 8128 KB)
[ 0.000000] .rodata : 0xffffff8008870000 - 0xffffff8008b3f000 ( 2876 KB)
[ 0.000000] .init : 0xffffff8008b3f000 - 0xffffff8008bb2000 ( 460 KB)
[ 0.000000] .data : 0xffffff8008bb2000 - 0xffffff8008c3e400 ( 561 KB)
[ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
[ 0.000000] 0xffffffbe00000000 - 0xffffffbe00e00000 ( 14 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER20
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0
[ 0.000000] Architected cp15 timer(s) running at 99.99MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171015c6fb, max_idle_ns: 440795203665 ns
[ 0.000004] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 4398046511101ns
[ 0.008279] Console: colour dummy device 80x25
[ 0.012382] console [hvc0] enabled
[ 0.012382] console [hvc0] enabled
[ 0.019204] bootconsole [xen0] disabled
[ 0.019204] bootconsole [xen0] disabled
[ 0.026913] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399995)
[ 0.037362] pid_max: default: 32768 minimum: 301
[ 0.042141] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.048788] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.056539] ASID allocator initialised with 65536 entries
[ 0.061530] xen:grant_table: Grant tables using version 1 layout
[ 0.067499] Grant table initialized
[ 0.071037] xen:events: Using FIFO-based ABI
[ 0.075349] Xen: initializing cpu0
[ 0.079399] zynqmp_plat_init: pm node not found
[ 0.083456] EFI services will not be available.
[ 0.088061] Brought up 1 CPUs
[ 0.090992] SMP: Total of 1 processors activated.
[ 0.095763] CPU: All CPU(s) started at EL1
[ 0.099923] alternatives: patching kernel code
[ 0.104878] devtmpfs: initialized
[ 0.111860] DMI not present or invalid.
[ 0.111979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.124334] xor: measuring software checksum speed
[ 0.166394] 8regs : 2177.000 MB/sec
[ 0.206457] 8regs_prefetch: 1934.000 MB/sec
[ 0.246520] 32regs : 2412.000 MB/sec
[ 0.286585] 32regs_prefetch: 2178.000 MB/sec
[ 0.286626] xor: using function: 32regs (2412.000 MB/sec)
[ 0.292173] NET: Registered protocol family 16
[ 0.296514] vdso: 2 pages (1 code @ ffffff8008876000, 1 data @ ffffff8008bb8000)
[ 0.303066] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.310704] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.316088] xen:swiotlb_xen: Warning: only able to allocate 4 MB for software IO TLB
[ 0.324491] software IO TLB [mem 0x72000000-0x72400000] (4MB) mapped at [ffffffc032000000-ffffffc0323fffff]
[ 0.334332] ARM CCI_400_r1 PMU driver probed
[ 0.337722] /amba/dma@fd500000: could not find phandle
[ 0.343190] /amba/dma@fd510000: could not find phandle
[ 0.348368] /amba/dma@fd520000: could not find phandle
[ 0.353562] /amba/dma@fd530000: could not find phandle
[ 0.358746] /amba/dma@fd540000: could not find phandle
[ 0.363946] /amba/dma@fd550000: could not find phandle
[ 0.369129] /amba/dma@fd560000: could not find phandle
[ 0.374321] /amba/dma@fd570000: could not find phandle
[ 0.379625] /amba/dma@ffa80000: could not find phandle
[ 0.384703] /amba/dma@ffa90000: could not find phandle
[ 0.389886] /amba/dma@ffaa0000: could not find phandle
[ 0.395083] /amba/dma@ffab0000: could not find phandle
[ 0.400270] /amba/dma@ffac0000: could not find phandle
[ 0.405464] /amba/dma@ffad0000: could not find phandle
[ 0.410651] /amba/dma@ffae0000: could not find phandle
[ 0.415844] /amba/dma@ffaf0000: could not find phandle
[ 0.421126] /amba/ethernet@ff0e0000: could not find phandle
[ 0.428928] /amba/spi@ff0f0000: could not find phandle
[ 0.432102] /amba/sdhci@ff160000: could not find phandle
[ 0.437225] /amba/sdhci@ff170000: could not find phandle
[ 0.442638] /amba/usb@fe200000: could not find phandle
[ 0.467070] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.536192] raid6: int64x1 gen() 409 MB/s
[ 0.604225] raid6: int64x1 xor() 430 MB/s
[ 0.672351] raid6: int64x2 gen() 617 MB/s
[ 0.740502] raid6: int64x2 xor() 559 MB/s
[ 0.808626] raid6: int64x4 gen() 907 MB/s
[ 0.876750] raid6: int64x4 xor() 685 MB/s
[ 0.944895] raid6: int64x8 gen() 1056 MB/s
[ 1.012962] raid6: int64x8 xor() 683 MB/s
[ 1.081131] raid6: neonx1 gen() 672 MB/s
[ 1.149234] raid6: neonx1 xor() 702 MB/s
[ 1.217382] raid6: neonx2 gen() 1044 MB/s
[ 1.285484] raid6: neonx2 xor() 925 MB/s
[ 1.353620] raid6: neonx4 gen() 1385 MB/s
[ 1.421726] raid6: neonx4 xor() 1079 MB/s
[ 1.489843] raid6: neonx8 gen() 1556 MB/s
[ 1.557977] raid6: neonx8 xor() 1131 MB/s
[ 1.558015] raid6: using algorithm neonx8 gen() 1556 MB/s
[ 1.562155] raid6: .... xor() 1131 MB/s, rmw enabled
[ 1.567169] raid6: using intx1 recovery algorithm
[ 1.572162] ACPI: Interpreter disabled.
[ 1.575851] xen:balloon: Initialising balloon driver
[ 1.581157] xen_balloon: Initialising balloon driver
[ 1.586566] SCSI subsystem initialized
[ 1.589843] usbcore: registered new interface driver usbfs
[ 1.595239] usbcore: registered new interface driver hub
[ 1.600594] usbcore: registered new device driver usb
[ 1.605749] media: Linux media interface: v0.10
[ 1.610279] Linux video capture interface: v2.00
[ 1.614952] pps_core: LinuxPPS API ver. 1 registered
[ 1.619939] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.629124] PTP clock support registered
[ 1.633131] EDAC MC: Ver: 3.0.0
[ 1.637530] dmi: Firmware registration failed.
[ 1.640838] FPGA manager framework
[ 1.644297] Advanced Linux Sound Architecture Driver Initialized.
[ 1.651805] clocksource: Switched to clocksource arch_sys_counter
[ 1.656639] VFS: Disk quotas dquot_6.6.0
[ 1.660555] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.667640] pnp: PnP ACPI: disabled
[ 1.677722] NET: Registered protocol family 2
[ 1.678115] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.683729] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.690352] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.696668] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.702620] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.709187] NET: Registered protocol family 1
[ 1.714143] RPC: Registered named UNIX socket transport module.
[ 1.719368] RPC: Registered udp transport module.
[ 1.724118] RPC: Registered tcp transport module.
[ 1.728875] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.735507] Trying to unpack rootfs image as initramfs...
[ 1.829211] Freeing initrd memory: 32064K (ffffffc008200000 - ffffffc00a150000)
[ 1.831837] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.837381] audit: initializing netlink subsys (disabled)
[ 1.842785] audit: type=2000 audit(1.716:1): initialized
[ 1.849215] workingset: timestamp_bits=60 max_order=18 bucket_order=0
[ 1.855369] NFS: Registering the id_resolver key type
[ 1.859735] Key type id_resolver registered
[ 1.863946] Key type id_legacy registered
[ 1.868024] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.874794] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.890483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.892368] io scheduler noop registered
[ 1.896338] io scheduler deadline registered
[ 1.900671] io scheduler cfq registered (default)
[ 1.905913] nwl-pcie fd0e0000.pcie: Link is DOWN
[ 1.910114] PCI host bridge /amba/pcie@fd0e0000 ranges:
[ 1.915355] No bus range found for /amba/pcie@fd0e0000, using [bus 00-ff]
[ 1.922364] MEM 0xe0000000..0xefffffff -> 0xe0000000
[ 1.927547] MEM 0x600000000..0x7ffffffff -> 0x600000000
[ 1.933079] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
[ 1.939225] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.944764] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 1.951682] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
(XEN) physdev.c:17:d0v0 PHYSDEVOP cmd=25: not implemented
(XEN) physdev.c:17:d0v0 PHYSDEVOP cmd=15: not implemented
[ 1.969418] pci 0000:00:00.0: Failed to add - passthrough or MSI/MSI-X might fail!
[ 1.977117] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
[ 1.983421] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 1.988983] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 1.995839] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 2.002833] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 2.009840] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 2.016839] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 2.023862] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 2.030855] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 2.037859] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 2.044870] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[ 2.051885] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[ 2.058876] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[ 2.065892] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[ 2.072891] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[ 2.079906] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[ 2.086911] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[ 2.093913] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[ 2.102037] xen:xen_evtchn: Event-channel device installed
[ 2.153318] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.155458] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 215, base_baud = 6250000) is a xuartps
[ 2.164196] [drm] Initialized drm 1.1.0 20060810
[ 2.168225] Unable to detect cache hierarchy from DT for CPU 0
[ 2.178951] brd: module loaded
[ 2.182686] loop: module loaded
[ 2.182731] Invalid max_queues (4), will use default max: 1.
[ 2.186734] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 2.195012] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
[ 2.206047] scsi host0: ahci-ceva
[ 2.208400] scsi host1: ahci-ceva
[ 2.211527] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 212
[ 2.219494] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 212
[ 2.227654] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.234416] zynqmp-qspi ff0f0000.spi: rx bus width not found
[ 2.240531] m25p80 spi0.0: found n25q512a, expected m25p80
[ 2.245489] m25p80 spi0.0: n25q512a (131072 Kbytes)
[ 2.250216] 4 ofpart partitions found on MTD device spi0.0
[ 2.255731] Creating 4 MTD partitions on "spi0.0":
[ 2.260573] 0x000000000000-0x000001e00000 : "boot"
[ 2.265964] 0x000001e00000-0x000001e40000 : "bootenv"
[ 2.271076] 0x000001e40000-0x000004240000 : "kernel"
[ 2.276114] 0x000004240000-0x000008000000 : "spare"
[ 2.282518] libphy: Fixed MDIO Bus: probed
[ 2.285069] tun: Universal TUN/TAP device driver, 1.6
[ 2.289714] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.299512] CAN device driver interface
[ 2.300696] gpiod_set_value: invalid GPIO
[ 2.304298] libphy: MACB_mii_bus: probed
[ 2.311376] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 25 (00:0a:35:00:22:01)
[ 2.317773] TI DP83867 ff0e0000.etherne:0c: attached PHY driver [TI DP83867] (mii_bus:phy_addr=ff0e0000.etherne:0c, irq=-1)
[ 2.329427] xen_netfront: Initialising Xen virtual ethernet driver
[ 2.335218] usbcore: registered new interface driver asix
[ 2.340620] usbcore: registered new interface driver ax88179_178a
[ 2.346749] usbcore: registered new interface driver cdc_ether
[ 2.352629] usbcore: registered new interface driver net1080
[ 2.358339] usbcore: registered new interface driver cdc_subset
[ 2.364306] usbcore: registered new interface driver zaurus
[ 2.369953] usbcore: registered new interface driver cdc_ncm
[ 2.377229] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.382206] ehci-pci: EHCI PCI platform driver
[ 2.386955] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.392245] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.400870] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x00010010
[ 2.408717] xhci-hcd xhci-hcd.0.auto: irq 220, io mem 0xfe200000
[ 2.414936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.421555] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.428815] usb usb1: Product: xHCI Host Controller
[ 2.433743] usb usb1: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 2.439707] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 2.444940] hub 1-0:1.0: USB hub found
[ 2.448559] hub 1-0:1.0: 1 port detected
[ 2.452549] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.457971] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.465711] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.473878] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.480630] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.487889] usb usb2: Product: xHCI Host Controller
[ 2.492823] usb usb2: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 2.498787] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 2.503975] hub 2-0:1.0: USB hub found
[ 2.507586] hub 2-0:1.0: 1 port detected
[ 2.511689] usbcore: registered new interface driver uas
[ 2.516936] usbcore: registered new interface driver usb-storage
[ 2.523312] mousedev: PS/2 mouse device common for all mice
[ 2.529083] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
[ 2.535862] i2c /dev entries driver
[ 2.541605] pca953x 0-0020: interrupt support not compiled in
[ 2.546955] pca953x 0-0021: interrupt support not compiled in
[ 2.551014] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 201
[ 2.557191] ata2: SATA link down (SStatus 0 SControl 330)
[ 2.562484] ata1: SATA link down (SStatus 0 SControl 330)
[ 2.568159] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 202
[ 2.574911] i2c i2c-0: Added multiplexed i2c bus 2
[ 2.579665] i2c i2c-0: Added multiplexed i2c bus 3
[ 2.584655] i2c i2c-0: Added multiplexed i2c bus 4
[ 2.589068] i2c i2c-0: Added multiplexed i2c bus 5
[ 2.593352] pca954x 0-0075: registered 4 multiplexed busses for I2C mux pca9544
[ 2.601179] at24 6-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[ 2.607451] i2c i2c-6: Failed to register i2c client 24c08 at 0x55 (-16)
[ 2.614197] i2c i2c-6: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@55
[ 2.623186] i2c i2c-6: Failed to register i2c client 24c08 at 0x56 (-16)
[ 2.629927] i2c i2c-6: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@56
[ 2.638934] i2c i2c-6: Failed to register i2c client 24c08 at 0x57 (-16)
[ 2.645677] i2c i2c-6: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@57
[ 2.654674] i2c i2c-1: Added multiplexed i2c bus 6
[ 2.659968] i2c i2c-1: Added multiplexed i2c bus 7
[ 2.664636] i2c i2c-1: Added multiplexed i2c bus 8
[ 2.669482] i2c i2c-1: Added multiplexed i2c bus 9
[ 2.674317] i2c i2c-1: Added multiplexed i2c bus 10
[ 2.679198] i2c i2c-1: Added multiplexed i2c bus 11
[ 2.684097] i2c i2c-1: Added multiplexed i2c bus 12
[ 2.689037] i2c i2c-1: Added multiplexed i2c bus 13
[ 2.693771] pca954x 1-0074: registered 8 multiplexed busses for I2C switch pca9548
[ 2.701596] i2c i2c-1: Added multiplexed i2c bus 14
[ 2.706487] i2c i2c-1: Added multiplexed i2c bus 15
[ 2.711445] i2c i2c-1: Added multiplexed i2c bus 16
[ 2.716584] i2c i2c-1: Added multiplexed i2c bus 17
[ 2.721445] i2c i2c-1: Added multiplexed i2c bus 18
[ 2.726229] i2c i2c-1: Added multiplexed i2c bus 19
[ 2.731187] i2c i2c-1: Added multiplexed i2c bus 20
[ 2.736091] i2c i2c-1: Added multiplexed i2c bus 21
[ 2.740828] pca954x 1-0075: registered 8 multiplexed busses for I2C switch pca9548
[ 2.750093] ina2xx 2-0040: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.755179] ina2xx 2-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.761582] ina2xx 2-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.768009] ina2xx 2-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.774384] ina2xx 2-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.780774] ina2xx 2-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.787182] ina2xx 2-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.793590] ina2xx 2-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.799996] ina2xx 2-004a: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.806384] ina2xx 2-004b: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.812869] ina2xx 3-0040: power monitor ina226 (Rshunt = 2000 uOhm)
[ 2.819187] ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.825588] ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.831994] ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.838399] ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.844799] ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.851191] ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.857596] ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.892592] EDAC MC: ECC not enabled
[ 2.892881] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[ 2.902927] sdhci: Secure Digital Host Controller Interface driver
[ 2.909051] sdhci: Copyright(c) Pierre Ossman
[ 2.913467] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.919334] sdhci-arasan ff160000.sdhci: "xlnx,mio_bank " property is missing.
[ 2.926451] sdhci-arasan: probe of ff160000.sdhci failed with error -22
[ 2.971794] mmc0: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using ADMA 64-bit
[ 2.974397] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.980436] usbcore: registered new interface driver usbhid
[ 2.985915] usbhid: USB HID core driver
[ 3.006852] si570 8-005d: registered, current frequency 300000000 Hz
[ 3.031440] si570 9-005d: registered, current frequency 148500000 Hz
[ 3.032480] fpga_manager fpga0: Xilinx ZynqMp FPGA Manager registered
[ 3.039447] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 3.046764] Initializing XFRM netlink socket
[ 3.050727] NET: Registered protocol family 10
[ 3.057680] sit: IPv6 over IPv4 tunneling driver
[ 3.060216] NET: Registered protocol family 17
[ 3.064351] NET: Registered protocol family 15
[ 3.068838] can: controller area network core (rev 20120528 abi 9)
[ 3.075093] NET: Registered protocol family 29
[ 3.079572] can: raw protocol (rev 20120528)
[ 3.083890] can: broadcast manager protocol (rev 20120528 t)
[ 3.089600] can: netlink gateway (rev 20130117) max_hops=1
[ 3.095299] 9pnet: Installing 9P2000 support
[ 3.099481] Key type dns_resolver registered
[ 3.106448] registered taskstats version 1
[ 3.108418] Btrfs loaded
[ 3.114808] rtc_zynqmp ffa60000.rtc: setting system clock to 1986-12-22 00:43:37 UTC (535596217)
[ 3.119494] ALSA device list:
[ 3.122394] No soundcards found.
[ 3.129402] Freeing unused kernel memory: 460K (ffffff8008b3f000 - ffffff8008bb2000)
INIT: version 2.88 booting
[ 4.087687] random: dd urandom read with 7 bits of entropy available
Fri Dec 16 01:23:11 UTC 2016
Starting internet superserver: inetd.
INIT: Entering runlevel: 5
Configuring network interfaces... [ 4.186752] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.24.1) started
Sending discover...
[ 6.308108] macb ff0e0000.ethernet eth0: link up (1000/Full)
[ 6.308242] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 10.0.0.191...
Lease of 10.0.0.191 obtained, lease time 604800
/etc/udhcpc.d/50default: Adding DNS 75.75.75.75
/etc/udhcpc.d/50default: Adding DNS 75.75.76.76
done.
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
generating ssh ED25519 key...
done.
Starting syslogd/klogd: done
Starting /usr/sbin/xenstored....
Setting domain 0 name, domid and JSON config...
libxl: error: libxl.c:689:libxl_domain_info: getting domain info list: Permission denied
libxl: error: libxl_dom.c:1127:libxl__userdata_path: unable to find domain info for domain 0: Permission denied
cannot store stub json config for domain 0
Starting xenconsoled...
Starting QEMU as disk backend for dom0
/etc/rc5.d/S80xencommons: line 102: /usr/bin/qemu-system-i386: No such file or directory
Starting domain watchdog daemon: xenwatchdogd startup
PetaLinux 2016.4 plnx_aarch64 /dev/hvc0
plnx_aarch64 login: root
root@plnx_aarch64:~# [ 33.180039] random: nonblocking pool is initialized
(XEN)
(XEN) TBM Jan 25 2017 12:45:38 running on xen-guest_irq_latency
(XEN) MIDR=410fd034
(XEN) D$ L1 32KB linesize=64b ways=4 sets=128
(XEN) I$ L1 32KB linesize=64b ways=2 sets=256
(XEN) D$ L2 1024KB linesize=64b ways=16 sets=1024
(XEN) I$ L2 1024KB linesize=64b ways=16 sets=1024
(XEN) plat_init_a64
(XEN) EL1 I and D caches enabled
(XEN) RDO: enable MMU
(XEN) RDO: Still here? EL1 S1 MMU is on
(XEN) CNTFRQ=99998999 Hz k=10
(XEN) latency (ns): max=8470 warm_max=0 min=8470 avg=8470
(XEN) latency (ns): max=8470 warm_max=0 min=6700 avg=8249
(XEN) latency (ns): max=8470 warm_max=6580 min=6580 avg=8041
(XEN) latency (ns): max=8470 warm_max=6600 min=6580 avg=7861
(XEN) latency (ns): max=8470 warm_max=6600 min=6530 avg=7695
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7525
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7392
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7281
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7178
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7102
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7020
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6948
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6886
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6837
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6794
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6769
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6725
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6696
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6663
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6644
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6628
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6616
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6591
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6565
(XEN) latency (ns): max=8470 warm_max=6660 min=6330 avg=6576
(XEN) latency (ns): max=8470 warm_max=6660 min=6330 avg=6558
(XEN) latency (ns): max=8470 warm_max=6660 min=6180 avg=6511
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6555
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6535
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6522
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6507
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6497
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6494
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6484
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6478
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6464
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6461
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6462
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6457
(XEN) sched_smt_power_savings: disabled
(XEN) NOW=56019474589
(XEN) Online Cpus: 0-3
(XEN) Cpupool 0:
(XEN) Cpus: 0-3
(XEN) Scheduler: SMP Credit Scheduler (credit)
(XEN) info:
(XEN) ncpus = 4
(XEN) master = 0
(XEN) credit = 1200
(XEN) credit balance = 0
(XEN) weight = 256
(XEN) runq_sort = 260
(XEN) default-weight = 256
(XEN) tslice = 30ms
(XEN) ratelimit = 1000us
(XEN) credits per msec = 10
(XEN) ticks per tslice = 3
(XEN) migration delay = 0us
(XEN) idlers: 00000000,00000000,00000000,0000000e
(XEN) active vcpus:
(XEN) 1: [0.0] pri=0 flags=0 cpu=0 credit=96 [w=256,cap=0]
(XEN) CPUs info:
(XEN) CPU[00] sort=260, sibling=00000000,00000000,00000000,00000001, core=00000000,00000000,00000000,00000001
(XEN) run: [0.0] pri=0 flags=0 cpu=0 credit=96 [w=256,cap=0]
(XEN) 1: [32767.0] pri=-64 flags=0 cpu=0
(XEN) CPU[01] sort=260, sibling=00000000,00000000,00000000,00000002, core=00000000,00000000,00000000,00000002
(XEN) run: [32767.1] pri=-64 flags=0 cpu=1
(XEN) CPU[02] sort=260, sibling=00000000,00000000,00000000,00000004, core=00000000,00000000,00000000,00000004
(XEN) run: [32767.2] pri=-64 flags=0 cpu=2
(XEN) CPU[03] sort=260, sibling=00000000,00000000,00000000,00000008, core=00000000,00000000,00000000,00000008
(XEN) run: [32767.3] pri=-64 flags=0 cpu=3
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6629
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6596
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6579
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6570
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6562
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6555
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6534
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6505
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6480
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6473
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6459
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6448
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6447
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6438
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6427
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6432
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6423
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6425
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6414
[-- Attachment #3: Type: TEXT/PLAIN, Size: 36288 bytes --]
(XEN) Xen version 4.9-unstable (sstabellini@) (aarch64-linux-gnu-gcc (Linaro GCC 2014.05) 4.9.1 20140422 (prerelease)) debug=y Thu Feb 16 14:55:12 PST 2017
(XEN) Latest ChangeSet: Thu Feb 16 14:39:16 2017 -0800 git:4e0ef4d-dirty
(XEN) Processor: 410fd034: "ARM Limited", variant: 0x0, part 0xd03, rev 0x4
(XEN) 64-bit Execution:
(XEN) Processor Features: 0000000000002222 0000000000000000
(XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32
(XEN) Extensions: FloatingPoint AdvancedSIMD
(XEN) Debug Features: 0000000010305106 0000000000000000
(XEN) Auxiliary Features: 0000000000000000 0000000000000000
(XEN) Memory Model Features: 0000000000001122 0000000000000000
(XEN) ISA Features: 0000000000011120 0000000000000000
(XEN) 32-bit Execution:
(XEN) Processor Features: 00000131:00011011
(XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle
(XEN) Extensions: GenericTimer Security
(XEN) Debug Features: 03010066
(XEN) Auxiliary Features: 00000000
(XEN) Memory Model Features: 10201105 40000000 01260000 02102211
(XEN) ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121
(XEN) Using PSCI-1.0 for SMP bringup
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 99998 KHz
(XEN) GICv2 initialization:
(XEN) gic_dist_addr=00000000f9010000
(XEN) gic_cpu_addr=00000000f9020000
(XEN) gic_hyp_addr=00000000f9040000
(XEN) gic_vcpu_addr=00000000f9060000
(XEN) gic_maintenance_irq=25
(XEN) GICv2: Adjusting CPU interface base to 0xf902f000
(XEN) GICv2: 192 lines, 4 cpus, secure (IID 0200143b).
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ26 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ27 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ30 as Edge-triggered. H/w forces to Level-triggered.
(XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
(XEN) Initializing Credit2 scheduler
(XEN) load_precision_shift: 18
(XEN) load_window_shift: 30
(XEN) underload_balance_tolerance: 0
(XEN) overload_balance_tolerance: -3
(XEN) runqueues arrangement: socket
(XEN) load tracking window length 1073741824 ns
(XEN) Adding cpu 0 to runqueue 0
(XEN) First cpu on runqueue, activating
(XEN) Allocated console ring of 32 KiB.
(XEN) Bringing up CPU1
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ26 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ27 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ30 as Edge-triggered. H/w forces to Level-triggered.
(XEN) Adding cpu 1 to runqueue 0
(XEN) CPU 1 booted.
(XEN) Bringing up CPU2
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ26 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ27 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ30 as Edge-triggered. H/w forces to Level-triggered.
(XEN) Adding cpu 2 to runqueue 0
(XEN) CPU 2 booted.
(XEN) Bringing up CPU3
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ26 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ27 as Edge-triggered. H/w forces to Level-triggered.
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ30 as Edge-triggered. H/w forces to Level-triggered.
(XEN) Adding cpu 3 to runqueue 0
(XEN) CPU 3 booted.
(XEN) Brought up 4 CPUs
(XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID
(XEN) P2M: 3 levels with order-1 root, VTCR 0x80023558
(XEN) smmu: /amba/smmu@fd800000: probing hardware configuration...
(XEN) smmu: /amba/smmu@fd800000: SMMUv2 with:
(XEN) smmu: /amba/smmu@fd800000: stage 2 translation
(XEN) smmu: /amba/smmu@fd800000: stream matching with 48 register groups, mask 0x7fff
(XEN) smmu: /amba/smmu@fd800000: 16 context banks (0 stage-2 only)
(XEN) smmu: /amba/smmu@fd800000: Stage-2: 40-bit IPA -> 48-bit PA
(XEN) smmu: /amba/smmu@fd800000: registered 26 master devices
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) build-id: 6f4fcc598664b1af0ae7b2e2f64b6ed3f140ef2f
(XEN) alternatives: Patching with alt table 00000000400f3c48 -> 00000000400f3ffc
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading kernel from boot module @ 0000000000080000
(XEN) Loading ramdisk from boot module @ 00000000060af000
(XEN) Allocating 1:1 mappings totalling 1024MB for dom0:
(XEN) BANK[0] 0x00000040000000-0x00000080000000 (1024MB)
(XEN) Grant table range: 0x0000087fe00000-0x0000087fe61000
(XEN) smmu: /amba/smmu@fd800000: d0: p2maddr 0x000000087ff62000
(XEN) Loading zImage from 0000000000080000 to 0000000040080000-0000000043180000
(XEN) Loading dom0 initrd from 00000000060af000 to 0x0000000048200000-0x000000004a150400
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading dom0 DTB to 0x0000000048000000-0x0000000048006c4a
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 296kB init memory.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.0-xilinx (xbrbbot@xcosswbld01) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP Thu Dec 15 18:01:07 MST 2016
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: xen0 at I/O port 0x0 (options '')
[ 0.000000] bootconsole [xen0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] Xen 4.9 support found
[ 0.000000] percpu: Embedded 20 pages/cpu @ffffffc037f73000 s42240 r8192 d31488 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258560
[ 0.000000] Kernel command line: console=hvc0 earlycon=xen earlyprintk=xen maxcpus=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0x72e00000-0x76e00000] (64MB) mapped at [ffffffc032e00000-ffffffc036dfffff]
[ 0.000000] Memory: 790568K/1048576K available (8136K kernel code, 561K rwdata, 2860K rodata, 460K init, 374K bss, 126936K reserved, 131072K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdffff0000 ( 247 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008870000 ( 8128 KB)
[ 0.000000] .rodata : 0xffffff8008870000 - 0xffffff8008b3f000 ( 2876 KB)
[ 0.000000] .init : 0xffffff8008b3f000 - 0xffffff8008bb2000 ( 460 KB)
[ 0.000000] .data : 0xffffff8008bb2000 - 0xffffff8008c3e400 ( 561 KB)
[ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
[ 0.000000] 0xffffffbe00000000 - 0xffffffbe00e00000 ( 14 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER20
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0
[ 0.000000] Architected cp15 timer(s) running at 99.99MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171015c6fb, max_idle_ns: 440795203665 ns
[ 0.000004] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 4398046511101ns
[ 0.008283] Console: colour dummy device 80x25
[ 0.012378] console [hvc0] enabled
[ 0.012378] console [hvc0] enabled
[ 0.019210] bootconsole [xen0] disabled
[ 0.019210] bootconsole [xen0] disabled
[ 0.026913] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399995)
[ 0.037368] pid_max: default: 32768 minimum: 301
[ 0.042142] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.048789] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.056540] ASID allocator initialised with 65536 entries
[ 0.061531] xen:grant_table: Grant tables using version 1 layout
[ 0.067507] Grant table initialized
[ 0.071038] xen:events: Using FIFO-based ABI
[ 0.075349] Xen: initializing cpu0
[ 0.079398] zynqmp_plat_init: pm node not found
[ 0.083458] EFI services will not be available.
[ 0.088063] Brought up 1 CPUs
[ 0.090993] SMP: Total of 1 processors activated.
[ 0.095764] CPU: All CPU(s) started at EL1
[ 0.099919] alternatives: patching kernel code
[ 0.104879] devtmpfs: initialized
[ 0.111828] DMI not present or invalid.
[ 0.111948] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.124339] xor: measuring software checksum speed
[ 0.166394] 8regs : 2177.000 MB/sec
[ 0.206457] 8regs_prefetch: 1934.000 MB/sec
[ 0.246520] 32regs : 2412.000 MB/sec
[ 0.286585] 32regs_prefetch: 2178.000 MB/sec
[ 0.286626] xor: using function: 32regs (2412.000 MB/sec)
[ 0.292168] NET: Registered protocol family 16
[ 0.296515] vdso: 2 pages (1 code @ ffffff8008876000, 1 data @ ffffff8008bb8000)
[ 0.303066] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.310705] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.316082] xen:swiotlb_xen: Warning: only able to allocate 4 MB for software IO TLB
[ 0.324493] software IO TLB [mem 0x72000000-0x72400000] (4MB) mapped at [ffffffc032000000-ffffffc0323fffff]
[ 0.334331] ARM CCI_400_r1 PMU driver probed
[ 0.337730] /amba/dma@fd500000: could not find phandle
[ 0.343186] /amba/dma@fd510000: could not find phandle
[ 0.348369] /amba/dma@fd520000: could not find phandle
[ 0.353556] /amba/dma@fd530000: could not find phandle
[ 0.358747] /amba/dma@fd540000: could not find phandle
[ 0.363941] /amba/dma@fd550000: could not find phandle
[ 0.369132] /amba/dma@fd560000: could not find phandle
[ 0.374317] /amba/dma@fd570000: could not find phandle
[ 0.379625] /amba/dma@ffa80000: could not find phandle
[ 0.384697] /amba/dma@ffa90000: could not find phandle
[ 0.389889] /amba/dma@ffaa0000: could not find phandle
[ 0.395077] /amba/dma@ffab0000: could not find phandle
[ 0.400272] /amba/dma@ffac0000: could not find phandle
[ 0.405459] /amba/dma@ffad0000: could not find phandle
[ 0.410651] /amba/dma@ffae0000: could not find phandle
[ 0.415840] /amba/dma@ffaf0000: could not find phandle
[ 0.421124] /amba/ethernet@ff0e0000: could not find phandle
[ 0.428927] /amba/spi@ff0f0000: could not find phandle
[ 0.432103] /amba/sdhci@ff160000: could not find phandle
[ 0.437227] /amba/sdhci@ff170000: could not find phandle
[ 0.442640] /amba/usb@fe200000: could not find phandle
[ 0.467039] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.536076] raid6: int64x1 gen() 409 MB/s
[ 0.604165] raid6: int64x1 xor() 432 MB/s
[ 0.672300] raid6: int64x2 gen() 617 MB/s
[ 0.740425] raid6: int64x2 xor() 555 MB/s
[ 0.808549] raid6: int64x4 gen() 907 MB/s
[ 0.876699] raid6: int64x4 xor() 685 MB/s
[ 0.944824] raid6: int64x8 gen() 1056 MB/s
[ 1.012954] raid6: int64x8 xor() 683 MB/s
[ 1.081060] raid6: neonx1 gen() 672 MB/s
[ 1.149185] raid6: neonx1 xor() 702 MB/s
[ 1.217308] raid6: neonx2 gen() 1044 MB/s
[ 1.285429] raid6: neonx2 xor() 925 MB/s
[ 1.353553] raid6: neonx4 gen() 1385 MB/s
[ 1.421680] raid6: neonx4 xor() 1079 MB/s
[ 1.489788] raid6: neonx8 gen() 1556 MB/s
[ 1.557921] raid6: neonx8 xor() 1131 MB/s
[ 1.557959] raid6: using algorithm neonx8 gen() 1556 MB/s
[ 1.562095] raid6: .... xor() 1131 MB/s, rmw enabled
[ 1.567115] raid6: using intx1 recovery algorithm
[ 1.572102] ACPI: Interpreter disabled.
[ 1.575793] xen:balloon: Initialising balloon driver
[ 1.581095] xen_balloon: Initialising balloon driver
[ 1.586511] SCSI subsystem initialized
[ 1.589786] usbcore: registered new interface driver usbfs
[ 1.595180] usbcore: registered new interface driver hub
[ 1.600536] usbcore: registered new device driver usb
[ 1.605689] media: Linux media interface: v0.10
[ 1.610221] Linux video capture interface: v2.00
[ 1.614892] pps_core: LinuxPPS API ver. 1 registered
[ 1.619881] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.629066] PTP clock support registered
[ 1.633072] EDAC MC: Ver: 3.0.0
[ 1.637484] dmi: Firmware registration failed.
[ 1.640780] FPGA manager framework
[ 1.644238] Advanced Linux Sound Architecture Driver Initialized.
[ 1.651754] clocksource: Switched to clocksource arch_sys_counter
[ 1.656580] VFS: Disk quotas dquot_6.6.0
[ 1.660496] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.667589] pnp: PnP ACPI: disabled
[ 1.677675] NET: Registered protocol family 2
[ 1.678071] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.683679] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.690302] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.696611] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.702559] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.709133] NET: Registered protocol family 1
[ 1.714098] RPC: Registered named UNIX socket transport module.
[ 1.719317] RPC: Registered udp transport module.
[ 1.724068] RPC: Registered tcp transport module.
[ 1.728824] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.735457] Trying to unpack rootfs image as initramfs...
[ 1.829214] Freeing initrd memory: 32064K (ffffffc008200000 - ffffffc00a150000)
[ 1.831842] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.837389] audit: initializing netlink subsys (disabled)
[ 1.842787] audit: type=2000 audit(1.716:1): initialized
[ 1.849222] workingset: timestamp_bits=60 max_order=18 bucket_order=0
[ 1.855367] NFS: Registering the id_resolver key type
[ 1.859755] Key type id_resolver registered
[ 1.863948] Key type id_legacy registered
[ 1.868030] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.874796] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.890491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.892369] io scheduler noop registered
[ 1.896340] io scheduler deadline registered
[ 1.900675] io scheduler cfq registered (default)
[ 1.905914] nwl-pcie fd0e0000.pcie: Link is DOWN
[ 1.910115] PCI host bridge /amba/pcie@fd0e0000 ranges:
[ 1.915351] No bus range found for /amba/pcie@fd0e0000, using [bus 00-ff]
[ 1.922366] MEM 0xe0000000..0xefffffff -> 0xe0000000
[ 1.927553] MEM 0x600000000..0x7ffffffff -> 0x600000000
[ 1.933080] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
[ 1.939227] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.944760] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 1.951683] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
(XEN) physdev.c:17:d0v0 PHYSDEVOP cmd=25: not implemented
(XEN) physdev.c:17:d0v0 PHYSDEVOP cmd=15: not implemented
[ 1.969420] pci 0000:00:00.0: Failed to add - passthrough or MSI/MSI-X might fail!
[ 1.977127] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
[ 1.983420] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 1.988985] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 1.995839] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 2.002835] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 2.009841] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 2.016840] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 2.023846] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 2.030856] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 2.037865] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 2.044871] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[ 2.051878] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[ 2.058878] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[ 2.065893] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[ 2.072894] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[ 2.079901] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[ 2.086912] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[ 2.093913] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[ 2.102033] xen:xen_evtchn: Event-channel device installed
[ 2.153189] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.155328] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 215, base_baud = 6250000) is a xuartps
[ 2.164053] [drm] Initialized drm 1.1.0 20060810
[ 2.168098] Unable to detect cache hierarchy from DT for CPU 0
[ 2.178894] brd: module loaded
[ 2.182529] loop: module loaded
[ 2.182577] Invalid max_queues (4), will use default max: 1.
[ 2.186597] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 2.194860] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
[ 2.205933] scsi host0: ahci-ceva
[ 2.208250] scsi host1: ahci-ceva
[ 2.211373] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 212
[ 2.219333] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 212
[ 2.227508] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.234264] zynqmp-qspi ff0f0000.spi: rx bus width not found
[ 2.240356] m25p80 spi0.0: found n25q512a, expected m25p80
[ 2.245312] m25p80 spi0.0: n25q512a (131072 Kbytes)
[ 2.250055] 4 ofpart partitions found on MTD device spi0.0
[ 2.255569] Creating 4 MTD partitions on "spi0.0":
[ 2.260416] 0x000000000000-0x000001e00000 : "boot"
[ 2.265778] 0x000001e00000-0x000001e40000 : "bootenv"
[ 2.270946] 0x000001e40000-0x000004240000 : "kernel"
[ 2.275954] 0x000004240000-0x000008000000 : "spare"
[ 2.282358] libphy: Fixed MDIO Bus: probed
[ 2.284917] tun: Universal TUN/TAP device driver, 1.6
[ 2.289566] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.299396] CAN device driver interface
[ 2.300542] gpiod_set_value: invalid GPIO
[ 2.304151] libphy: MACB_mii_bus: probed
[ 2.311247] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 25 (00:0a:35:00:22:01)
[ 2.317621] TI DP83867 ff0e0000.etherne:0c: attached PHY driver [TI DP83867] (mii_bus:phy_addr=ff0e0000.etherne:0c, irq=-1)
[ 2.329274] xen_netfront: Initialising Xen virtual ethernet driver
[ 2.335065] usbcore: registered new interface driver asix
[ 2.340460] usbcore: registered new interface driver ax88179_178a
[ 2.346595] usbcore: registered new interface driver cdc_ether
[ 2.352474] usbcore: registered new interface driver net1080
[ 2.358185] usbcore: registered new interface driver cdc_subset
[ 2.364152] usbcore: registered new interface driver zaurus
[ 2.369795] usbcore: registered new interface driver cdc_ncm
[ 2.377082] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.382051] ehci-pci: EHCI PCI platform driver
[ 2.386802] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.392085] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.400713] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x00010010
[ 2.408562] xhci-hcd xhci-hcd.0.auto: irq 220, io mem 0xfe200000
[ 2.414782] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.421402] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.428660] usb usb1: Product: xHCI Host Controller
[ 2.433588] usb usb1: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 2.439552] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 2.444783] hub 1-0:1.0: USB hub found
[ 2.448405] hub 1-0:1.0: 1 port detected
[ 2.452393] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.457823] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.465551] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.473724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.480476] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.487734] usb usb2: Product: xHCI Host Controller
[ 2.492663] usb usb2: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 2.498633] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 2.503830] hub 2-0:1.0: USB hub found
[ 2.507440] hub 2-0:1.0: 1 port detected
[ 2.511533] usbcore: registered new interface driver uas
[ 2.516782] usbcore: registered new interface driver usb-storage
[ 2.523153] mousedev: PS/2 mouse device common for all mice
[ 2.528935] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
[ 2.535707] i2c /dev entries driver
[ 2.541444] pca953x 0-0020: interrupt support not compiled in
[ 2.546795] pca953x 0-0021: interrupt support not compiled in
[ 2.550859] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 201
[ 2.557035] ata2: SATA link down (SStatus 0 SControl 330)
[ 2.562335] ata1: SATA link down (SStatus 0 SControl 330)
[ 2.568009] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 202
[ 2.574769] i2c i2c-0: Added multiplexed i2c bus 2
[ 2.579511] i2c i2c-0: Added multiplexed i2c bus 3
[ 2.584506] i2c i2c-0: Added multiplexed i2c bus 4
[ 2.588941] i2c i2c-0: Added multiplexed i2c bus 5
[ 2.593191] pca954x 0-0075: registered 4 multiplexed busses for I2C mux pca9544
[ 2.600992] at24 6-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[ 2.607297] i2c i2c-6: Failed to register i2c client 24c08 at 0x55 (-16)
[ 2.614037] i2c i2c-6: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@55
[ 2.623032] i2c i2c-6: Failed to register i2c client 24c08 at 0x56 (-16)
[ 2.629773] i2c i2c-6: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@56
[ 2.638775] i2c i2c-6: Failed to register i2c client 24c08 at 0x57 (-16)
[ 2.645517] i2c i2c-6: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@57
[ 2.654520] i2c i2c-1: Added multiplexed i2c bus 6
[ 2.659789] i2c i2c-1: Added multiplexed i2c bus 7
[ 2.664473] i2c i2c-1: Added multiplexed i2c bus 8
[ 2.669330] i2c i2c-1: Added multiplexed i2c bus 9
[ 2.674164] i2c i2c-1: Added multiplexed i2c bus 10
[ 2.679045] i2c i2c-1: Added multiplexed i2c bus 11
[ 2.683945] i2c i2c-1: Added multiplexed i2c bus 12
[ 2.688875] i2c i2c-1: Added multiplexed i2c bus 13
[ 2.693617] pca954x 1-0074: registered 8 multiplexed busses for I2C switch pca9548
[ 2.701443] i2c i2c-1: Added multiplexed i2c bus 14
[ 2.706331] i2c i2c-1: Added multiplexed i2c bus 15
[ 2.711290] i2c i2c-1: Added multiplexed i2c bus 16
[ 2.716428] i2c i2c-1: Added multiplexed i2c bus 17
[ 2.721284] i2c i2c-1: Added multiplexed i2c bus 18
[ 2.726075] i2c i2c-1: Added multiplexed i2c bus 19
[ 2.731025] i2c i2c-1: Added multiplexed i2c bus 20
[ 2.735935] i2c i2c-1: Added multiplexed i2c bus 21
[ 2.740674] pca954x 1-0075: registered 8 multiplexed busses for I2C switch pca9548
[ 2.749935] ina2xx 2-0040: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.755025] ina2xx 2-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.761436] ina2xx 2-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.767820] ina2xx 2-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.774230] ina2xx 2-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.780623] ina2xx 2-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.787028] ina2xx 2-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.793432] ina2xx 2-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.799835] ina2xx 2-004a: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.806230] ina2xx 2-004b: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.812724] ina2xx 3-0040: power monitor ina226 (Rshunt = 2000 uOhm)
[ 2.819033] ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.825438] ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.831835] ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.838245] ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.844638] ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.851038] ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.857443] ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.893958] EDAC MC: ECC not enabled
[ 2.894244] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[ 2.904297] sdhci: Secure Digital Host Controller Interface driver
[ 2.910419] sdhci: Copyright(c) Pierre Ossman
[ 2.914835] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.920704] sdhci-arasan ff160000.sdhci: "xlnx,mio_bank " property is missing.
[ 2.927819] sdhci-arasan: probe of ff160000.sdhci failed with error -22
[ 2.971743] mmc0: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using ADMA 64-bit
[ 2.974342] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.980386] usbcore: registered new interface driver usbhid
[ 2.985864] usbhid: USB HID core driver
[ 3.006812] si570 8-005d: registered, current frequency 300000000 Hz
[ 3.031405] si570 9-005d: registered, current frequency 148500000 Hz
[ 3.032429] fpga_manager fpga0: Xilinx ZynqMp FPGA Manager registered
[ 3.039397] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 3.046731] Initializing XFRM netlink socket
[ 3.050686] NET: Registered protocol family 10
[ 3.057639] sit: IPv6 over IPv4 tunneling driver
[ 3.060176] NET: Registered protocol family 17
[ 3.064309] NET: Registered protocol family 15
[ 3.068796] can: controller area network core (rev 20120528 abi 9)
[ 3.075050] NET: Registered protocol family 29
[ 3.079530] can: raw protocol (rev 20120528)
[ 3.083847] can: broadcast manager protocol (rev 20120528 t)
[ 3.089559] can: netlink gateway (rev 20130117) max_hops=1
[ 3.095259] 9pnet: Installing 9P2000 support
[ 3.099434] Key type dns_resolver registered
[ 3.106404] registered taskstats version 1
[ 3.108383] Btrfs loaded
[ 3.114762] rtc_zynqmp ffa60000.rtc: setting system clock to 1986-12-22 00:56:59 UTC (535597019)
[ 3.119456] ALSA device list:
[ 3.122346] No soundcards found.
[ 3.129359] Freeing unused kernel memory: 460K (ffffff8008b3f000 - ffffff8008bb2000)
INIT: version 2.88 booting
[ 4.093690] random: dd urandom read with 7 bits of entropy available
Fri Dec 16 01:23:11 UTC 2016
Starting internet superserver: inetd.
INIT: Entering runlevel: 5
Configuring network interfaces... [ 4.193262] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.24.1) started
Sending discover...
[ 6.308058] macb ff0e0000.ethernet eth0: link up (1000/Full)
[ 6.308191] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 10.0.0.191...
Lease of 10.0.0.191 obtained, lease time 604800
/etc/udhcpc.d/50default: Adding DNS 75.75.75.75
/etc/udhcpc.d/50default: Adding DNS 75.75.76.76
done.
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
generating ssh ED25519 key...
done.
Starting syslogd/klogd: done
Starting /usr/sbin/xenstored....
Setting domain 0 name, domid and JSON config...
libxl: error: libxl.c:689:libxl_domain_info: getting domain info list: Permission denied
libxl: error: libxl_dom.c:1127:libxl__userdata_path: unable to find domain info for domain 0: Permission denied
cannot store stub json config for domain 0
Starting xenconsoled...
Starting QEMU as disk backend for dom0
/etc/rc5.d/S80xencommons: line 102: /usr/bin/qemu-system-i386: No such file or directory
Starting domain watchdog daemon: xenwatchdogd startup
PetaLinux 2016.4 plnx_aarch64 /dev/hvc0
plnx_aarch64 login: [ 50.558969] random: nonblocking pool is initialized
(XEN)
(XEN) TBM Jan 25 2017 12:45:38 running on xen-guest_irq_latency
(XEN) MIDR=410fd034
(XEN) D$ L1 32KB linesize=64b ways=4 sets=128
(XEN) I$ L1 32KB linesize=64b ways=2 sets=256
(XEN) D$ L2 1024KB linesize=64b ways=16 sets=1024
(XEN) I$ L2 1024KB linesize=64b ways=16 sets=1024
(XEN) plat_init_a64
(XEN) EL1 I and D caches enabled
(XEN) RDO: enable MMU
(XEN) RDO: Still here? EL1 S1 MMU is on
(XEN) CNTFRQ=99998999 Hz k=10
(XEN) latency (ns): max=10180 warm_max=0 min=10180 avg=10180
(XEN) latency (ns): max=10180 warm_max=0 min=8470 avg=9967
(XEN) latency (ns): max=10180 warm_max=8150 min=8150 avg=9740
(XEN) latency (ns): max=10180 warm_max=8150 min=8050 avg=9529
(XEN) latency (ns): max=10180 warm_max=8150 min=8050 avg=9357
(XEN) latency (ns): max=10180 warm_max=8150 min=8030 avg=9192
(XEN) latency (ns): max=10180 warm_max=8150 min=8030 avg=9058
(XEN) latency (ns): max=10180 warm_max=8150 min=8020 avg=8929
(XEN) latency (ns): max=10180 warm_max=8150 min=8020 avg=8832
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8708
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8617
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8552
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8491
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8440
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8395
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8346
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8304
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8270
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8252
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8215
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8196
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8176
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8180
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8173
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8159
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8157
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8144
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8119
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8127
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8113
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8098
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8077
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8068
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8056
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8051
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8054
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8068
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8061
(XEN) sched_smt_power_savings: disabled
(XEN) NOW=83505753225
(XEN) Online Cpus: 0-3
(XEN) Cpupool 0:
(XEN) Cpus: 0-3
(XEN) Scheduler: SMP Credit Scheduler rev2 (credit2)
(XEN) Active queues: 1
(XEN) default-weight = 256
(XEN) Runqueue 0:
(XEN) ncpus = 4
(XEN) cpus = 0-3
(XEN) max_weight = 256
(XEN) instload = 1
(XEN) aveload = 3208 (~1%)
(XEN) l(XEN) idlers: 00000000,00000000,00000000,0000000a
a(XEN) tickled: 00000000,00000000,00000000,00000000
t(XEN) fully idle cores: 00000000,00000000,00000000,0000000a
e(XEN) Domain info:
n(XEN) Domain: 0 w 256 v 4
c(XEN) 1: [0.0] flags=2 cpu=0 credit=10500000 [w=256] load=3170 (~1%)
(XEN) 2: y[0.1] flags=0 cpu=1 credit=10500000 [w=256]( load=131072 (~50%)
(XEN) 3: n[0.2] flags=0 cpu=2s credit=10500000 [w=256]) load=131072 (~50%):
(XEN) 4: [0.3] flags=0 cpu=3m credit=10500000 [w=256]a load=131072 (~50%)x
=(XEN) Domain: 1 w 256 v 1
1(XEN) 5: 1[1.0] flags=2 cpu=2 credit=9713074 [w=256] load=56 (~0%)
(XEN) Runqueue info:
6(XEN) runqueue 0:
9(XEN) CPUs info:
0(XEN) CPU[00] runq=0, sibling=00000000,00000000,00000000,00000001, wcore=00000000,00000000,00000000,00000001
a(XEN) run: [0.0] flags=2 cpu=0 credit=10500000 [w=256] load=3170 (~1%)
(XEN) CPU[01] r runq=0, sibling=00000000,00000000,00000000,00000002, mcore=00000000,00000000,00000000,00000002
(XEN) CPU[02] _ runq=0, sibling=00000000,00000000,00000000,00000004, mcore=00000000,00000000,00000000,00000004
(XEN) run: [1.0] flags=2 cpu=2 credit=2915518 [w=256] load=56 (~0%)
(XEN) CPU[03] a runq=0, sibling=00000000,00000000,00000000,00000008, xcore=00000000,00000000,00000000,00000008
=11690 min=7840 avg=8514
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8494
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8444
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8401
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8346
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8664
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8565
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8497
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8432
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8388
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8349
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8305
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8280
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8237
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8203
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8197
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8187
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8154
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8150
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8144
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8136
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8111
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8109
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8116
[-- Attachment #4: Type: text/plain, Size: 127 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-02-16 23:07 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-10 0:54 Xen on ARM IRQ latency and scheduler overhead Stefano Stabellini
2017-02-10 8:40 ` Dario Faggioli
2017-02-10 18:32 ` Stefano Stabellini
2017-02-16 12:20 ` Dario Faggioli
2017-02-16 19:52 ` Stefano Stabellini
2017-02-16 23:07 ` Stefano Stabellini [this message]
2017-02-17 11:02 ` Dario Faggioli
2017-02-17 19:34 ` Julien Grall
2017-02-17 23:14 ` Stefano Stabellini
2017-02-18 0:02 ` Stefano Stabellini
2017-02-18 0:47 ` Dario Faggioli
2017-02-17 18:40 ` Dario Faggioli
2017-02-17 19:44 ` Julien Grall
2017-02-17 22:55 ` Stefano Stabellini
2017-02-18 0:59 ` Dario Faggioli
2017-02-20 12:18 ` Punit Agrawal
2017-02-18 0:41 ` Stefano Stabellini
2017-02-20 11:04 ` George Dunlap
2017-02-20 11:40 ` Dario Faggioli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.10.1702161439490.9566@sstabellini-ThinkPad-X260 \
--to=sstabellini@kernel.org \
--cc=dario.faggioli@citrix.com \
--cc=edgar.iglesias@xilinx.com \
--cc=george.dunlap@eu.citrix.com \
--cc=julien.grall@arm.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.